SM M127 Troubleshooting
SM M127 Troubleshooting
Level 3 Repair
PBA ( Top)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential
Lower ANT2 Lower ANT1
2020 M12 REV03 Block Diagram 20.12.14
(PRX_HB) (PRX_LMB)
TCXO
(OSC2000)
PRX_TR_IN_B5_26
B8 S AW DU PL EXE R
B8 LN A T CXO_IN 26MHz AP_PMIC_CLK_32K
Couple r Couple r
PRX_TR_IN_B8
(U1004)
(F1006)
TX_GSMHB TX_PA_OUT_GSMHB
PAM
(U1000)
TX_PA_OUT_GSMLB SKY77656-11 USB_AP_D_P/N BATTERY 6000mAh
(ATL)
B20 S AW DU PL EXE R
RFIC_SPEEDY
AP_UART_RXD/TXD IF PMIC
(F1002)
` GNSS_BBI/Q
B28 S AW DU PL EXE R RFFE0_CLK
S PD T (F1012)
(U1002) TRX_B28
TX_PA_OUT_B28 RFFE0_DATA
TR_PDET_OUT
VOL_UP/DN VOLUME KEY
PRX_TR_IN_B28
AP
PRX_TR_IN_B12_17
SPK_AMP_I2C_SCL/SDA
PRX_TR_IN_B4_66 SPK AMP
PRX_TR_IN_B20
TRANCEIVER SPK_I2S3
AW8896CSR(AWINIC) SPK
S5M9150X01 SPK_AMP_RST
B7 S AW DU PL EXE R
(F1014)
-L030
(U2005)
TX_B7 PRX_TR_IN_B7
PRX_TR_IN_B40
TX_PA_OUT_B7
HB FEMid SIM1_DATA/CLK/RST
(U1005)
TRX_B40
TRX_B38_41
HB PAM
PRX_TR_IN_B38_41
Exynos3830 NFC_SWP
SIM1/SIM2
SFMD3L0F001 (PAM1000) TX_TR_OUT_HB SIM2_DATA/CLK/RST
/SD CARD
RFFE0_CLK WIPS33232-01 RFFE0_CLK (NACHO) T_FLASH_DATA[4]/CLK/CMD
RFFE0_DATA RFFE0_DATA
DRX_SAW_IN_B20 DRX_SAW_OUT_B20
(S.LSI)
B1_2_4_66 S AW
DISPLAY/CAM PART
(F2006)
DRX_SAW_OUT_B2
DRX_SAW_IN_B1_2_4_66
DRX_SAW_OUT_B1_4_66 MIPI_RCAM_D(4)_P/N
B3 S AW SENSOR 48M+5M+2M+2M FF CAM
MIPI_RCAM_CLK_P/N
SP8T (F2001)
(GM2+GC5035B+GC02M1B+GC02M1)
DRX_SAW_IN_B3 DRX_SAW_OUT_B3
DRX_TR_IN_HB HUB
(U2000)
B7 S AW DRX LNA Bank DRX_TR_IN_B1_2_4_66
RCAM_EEP/SENSOR_I2C (MCNEX/Truly) CAM MIPI
/ RCAM_RST / RCAM_MCLK
(F2000)
(U2006) SWITCH
DRX_SAW_IN_B7 DRX_SAW_OUT_B7 MXD83E4W DRX_TR_IN_B3 PI3WVR648GEAEX
MIPI_FCAM_D(4)_P/N (DIODES)
DRX_TR_IN_LB
B40 S AW
(F2002) MIPI_FCAM_CLK_P/N 8M FF CAM (SK hynix SR846D)
DRX_SAW_IN_B40 DRX_SAW_OUT_B40 (PATRON)
FCAM_EEP/SENSOR_I2C
DRX_B38_41 / FCAM_RST / FCAM_MCLK
B28 S AW
(F2003)
RF PART / TSP_INT/RST
LCD_BL_EN
GPS BLIC
(ANTENNA) GPS SA W GPS LN A
(U300 5)
GPS SA W
(F3002) BLIC_I2C_SCL/SDA LM36274YFFR(TI)
(F3001)
GPS_RF_IN
APT
Modulator
SENSOR PART
BT / WIFI (U2000)
(ANTENNA) WIF I S AW
(U3007)
ACCEL
SENSOR_I2C_SCL/SDA LIS2DLC12TR(STMIC)
W B_RF_2G
BT/WLAN_SPDY_S612
EARJACK BT/WIFI/FM FM_SPDY_TO_612
(ANTENNA) S5N5C12A01-6630(S.LSI) GRIP
(U3001) WLAN_RX/TX_IQ GRIP_I2C_SCL/SDA
GRIP_INT A96T356HF(ABOVO)
FM AN T
WLBT_TCXO_IN_26M
NFC
(ANTENNA) BTP_SPI FPS
NFC NFC_I2C_SCL/SDA BTP_RST_N/ BTP_IRQ GW36T1(GOODIX)
NFC_ANT S3NRN4VX(S.LSI)
(U3002) NFC_GPIO/ NFC_EN/ NFC_IRQ
Model : SM-M127F
Revision : REV0.3
Manufacture Count : 522EA
Charge : 전훈남
Contact : 010-9492-7361
Date : 11/26
Routing :
Resin :
VX_SETUP(2020-09-29)_HHP
Created date of PCB data : 2020/11/20 14:01:51
SM-M127F
MIC6000
ANT2001
ANT3000
ANT3003
L2014
ANT2002
C2000
C3051
U2003
L2021 L2031
C3052
C2016
L2012
L2015
C3053
R3009
C3040
C2047
C2048
C6051
C6050
C6049
C2001
C3021
L2006
L2011
L2001
L6005
L6007
L3004
C3043
L3003
C3026
C6035 C6043
L3018
C3044
L3013
CON7001
C3041
C3022
SOC7003
C2066
C3045
C3010
L3000
C2063
L3001
U3001
L7000
L3006
L3005
R4025
C2058
C7000
C7004
F3001 R4023
L3007
C3000
SOC7000
L3009
L2054
C3042
TP_FM_SPDY
C3008
U2007
C7005
C7045 C3049
C3037
OSC2000
TP_BT_SPDY_FROM_S3000
C3038
C3002
U3004
C7043
C3009
L3011
C3001
TP_WLAN_SPDY_FROM_S3000 TP_WLAN_SPDY_TO_S3000 TP_BT_SPDY_TO_S3000
L3010
U7013
R3000
U3003
C3006 C3004 C3003
TP_ACC_INT
C3011 L3012
U7012
L2055
C7042 C7044 C2069
C1097
C1098
L1073
C1095
L2024
C2033
C2064
C2059
C2068
C3047 R2001 L1074 L1072
R2002 C2067
C1102
C2065
C2060
C2030 C2044 C2056 L1079 C1096 C1126 C1127
C2061
L2056
F3002 C2038
PAM1000
L1075
L1078
C2029 C2043 C2034 C2057
C1100
C2039
L2010
C1108
L2048
C3046 L3014
C1101
C1109
TP_TDD_SW
U1005
C2027
L2008
C1107
C1099
C5021 C5024
C5149 C5146 C2051 C2050
GPS_SPEEDY
C2028
SC7002
C1118
C1117
C1116
C1120
L1076
C7001 C5025
C5062 C2040
U2005
C5147
C5028
C1125
C2026
C2042
C2041 C1122
L6002
R5028 C6010
C2004
L2000
C5027 L1084
C1105
C1104
C1106
C1119
R6009
C1114
L1082
R6021 C1112 C1113
C1110
C5043
R5012 L1080
C2017
C2013
R6023
R6022
C6036
L1083
F1014 C1103
L1081
C5088
C5089
R7007
C1115
R1007
R1005
C1124
C1111
C5081 L1077
C6038
C6041
C6045
C6042
C2020
C2019 L1036
SOC7004
C6013
C6014
R1006
C5106
C5097
C5098
C5087
C5080
C5105
C1089
L1071
L1051
L1046
L1064
L1052
L1060
L1059
L1061
L1070
L1055
L1033
C5101
C5078
C1123
C2072 L1040
C5096 L6006 L6008 C5054
R6010
R6011
C1062
C1004
C5082
C1093
C1079
C1088
C1087
L1068
C1092
C1094
C1081
C5086
C5090
C5091
L1063
L1062
C5095
C5092
C5093
L1037
L1032
TH1000
C5048
TP5007
C1005
C5076 R1003
F1006
CON1000
L1004
L1050
C5094 C5045
OSC5000
C6011 C6012
C5083
C1010
C1041
L1017
C1078
L1019
C1080
C5077
R7010
C1011
C1000
C1006
C5065
C1060
L1027
L1028
U5000
C5107
F1011
C5084
F1010 F1012
U1000
C1001
U1004
C1054
C1055
L1025
L1001
C5085
C5014
C5017
C5099
C5150
C1076
C1091
C1045
C1086
C1085
L1020
L1022
L1058
L1065
L1069
C1002 L1045
F1002
C1050
L1066 C1072
C5018 C5035
C1012
C1063
C1067
R7008
L1034
C1090 L1067
C1051
C5038
C1049
C5019 U1002 L1024
L1005
L1006
C1009
C5064
C5013
L1042
L1021
C1022
C1023
L1008
C5003
ANT101
C5058
C5053
C5051
C5052
C1032
C1033
L1011
C1061
L1031
L1029
C1030
C1021
C1013
C5001
C5000
C1031
C1017
C1018
F1008 U1001
C1038
C1039
L1014
C1083
L1056
L1053
C1036
C1028
C5009
C1019
L1007
C1043
C5057
C5023
C1007
C1008
L1003
C4001
L5002
L5001
C5022
L5003
L5004
C5005
C1046
C1034
C1084
C5002 R1000
L1009
C1026
L1010
L1054
C1077
C5007
C1014
C5016 L1002
F1009
C5032
C5031
L1044
C5129
C5132
C1052 L1016
C1069
ZD1000 C1027
C5061 L1000
C1025
C1024
C1047
C1035
L1018
L1012
C5030
C4002 C1003
ANT100
C1057
L1047
C5020
C1020
C4004
C5046
C1053 C1037
C5050 C5042 C5059 C1040
R3011
F1007
R3008
C3048
C5026
C5029
C1042
L1015
C4061 L1023
R1001 L1013
SC7001
C5039 C5055
R3007
C4005
C4063
C4003
C4055
C5015
C4007
C4000
LED5000
ANT3001 ANT3002
C4006
C4011
R4000
C4038
C4030
C4053
R6013
C5126
C5120
C5118
C5128
C4026
C4065
C4064
R5001 C4017
C4036 L2003
C4033
L2007
TP6000
C4037
R5000 C4042
C4056
C5040 C4046
C4029
C4031
C2008
C6023
R6008
C4010
C4047
C4014
C4054
C4009
C4040
R6016
C4059
C5034
C4051 C4032
RFS1000
C2005
C4048
R5011 C4041
C4024
C4052
C5121
C5115
C4012
C4057
U2001
L2002
C4049
ZD5002 C5117 C6026 C4039 C4058
C6027
C6022
C2007
R4005
R4006
C4015
C6025
C4019
C5127 C5136 C6030 C4028
C4045
C4034
C4050
C4035
C6024
TP_4000
TP_UB
TP_PWR
HDC4000
USB_P
SOC5000
USB_N
SOC3000 TP_VBAT
SOC6000
Model : SM-M127F
Revision : REV0.3
Manufacture Count : 522EA
Charge : 전훈남
Contact : 010-9492-7361
Date : 11/26
Routing :
Resin :
VX_SETUP(2020-09-29)_HHP
Created date of PCB data : 2020/11/20 14:01:51
SM-M127F
U3005
ANT6001
L2029
ANT6000
CON1001
L2028
C2073
U2000
C2003
L2004
L2032 L2025 F2001
F2002
CON1003
C2045
F2000
L2034
L2027
C2046
L2030
C2049
L2026
CON7000
L2033
L2052 L2049
SOC7001
F2006
L2040
L2020 L2018 L2053 C2062
U2006
CON1002
SIM5001 C2025
L2050
C2054 L2051
L2042
L2017
C2024
C2055
L2023 L2019 F2004
C2023
C2036
C2021
L2044
L2041
L2043
L2039
C2071
L2022
C2022
L2036
L2058
L2045
C2053
L2046
SIM5002
ZD7000
F2005
F2007
C2035
L2038
F2003
L2047
L2035
L2059 L2057
U2008
C7008
L7001
ZD7002
L2037
C2032 C7041
C7025
R4015
R4018
C7006
C7030
C7007
R5021
R5022
C5145
U7004
SIM5000 SIM5003
U7011
R7006
C7029
L7004
R7009
C7026
C7031
C7027
C7016
U7003
C7028
SOC7002
C7023
U7006
C7032
L7002
L7003
R7012
U7001
C7009
ZD7003
U7010
U7007
C7017
ZD7001
C7034
C7022
C7010
C7035
R7005
U7005
C7018
C7033
U7002
C7011
C7020
C7012
C7021
R4012 R4010
R4014 R4008
R7011
C5144
SC7000
R5018
R5017
TP_TCK
TP_NFC_FIRM
C2011
R1004 C2012
TP_NFC_CLK_REQ
L1048
TH4000
R4036
R4021
R4026
R4004
C3032
C3015
C3012
C6032
C6031
R3002
C3035
R5024
R4016
R6015
R4017
C2052
C3024 R3001
U2002
C6021
C6015
C3019
C3017
C3014
ZD5010
L6004
C3020
C3027
C1082
C6018
R5015
R5013
R5014
R5016
C6004
C6003
C6019
R4037
C4023
C6002
C3025
R6006
R6007
C5141
BOTH7000
C3007
UCP4000
R4022
C3028
C3029
TP5015
R5020
UME5000
R4001
R4024
U3002 C6020
R5009
L3008
R4013
R5019
R2000
R4011
C4020
C2010 C3005
C5102
D5000
C5079
C6008
C4018 C5074
C3016
R5006
D5001 C3030
TP_CLK
TP_SWDIO
TP3000
TP_NFC_EN
TP_NFC_IRQ
ANT5000
C3013
ANT5004
R6020 C4022 C5112
C3036 R3006
R4002
C6009
C5113
C6017 ZD5000
C5066
D6000 C5111
C6016
C5143
C5068
R5005
R5025
L6001
C6007
TP5013
R5023
C5137
L5005 C5067
L6000
ANT5001
TP_EMMC5000
TP5016
TP5011 ANT5002
C5138
TP5012
R5026
C5063 C5071
C5109
C5100
R6000
TP5010
C5072
C5056
C5110
R4027
TP5000
TP5001
C6058
C6056
C6001
C6000
C6040
ANT5003
C5044
R6005
R4003
C4043
C6034
U5003
C6055
C6057
U6003
C5037
C6037
TP5009
C5047
TP5008
GND
C5036
TP5005 TP5006
TP_RST TP_INTN
L6003
C6048 TP5004
L5000
R5007
C6044
Q5000
R6004
R6003
R6002
R5008
ID
R4028 C5073
R6026
ZD5001
C6052
R4009 R5010
R5052
R6025
R4020
R4019
R6001
R7002
R7000
R7001
C5151
C6033
R4007
D6001
ZD6000
R6024
C5119
C5122
C5133
R6028
U6002
C5134
C6028
C6029
R6027
C5033
ZD6001
R6012
TP6001
TP5003
C6046 C6047
BOOT1
JTAG4000 JTAG4001
CN4000
Model : SM-F127G
Revision : REV0.3
Manufacture Count : 324EA
Charge : 전훈남
Contact : 010-9492-7361
Date : 11/30
Routing :
Resin :
VX_SETUP(2020-09-29)_HHP
Created date of PCB data : 2020/11/24 11:27:07
SM-M127G
MIC6000
ANT2001
ANT3000
ANT3003
L2014
ANT2002
C2000
C3051
U2003
L2021 L2031
C3052
C2016
L2012
L2015
C3053
R3009
C3040
C2047
C2048
C6051
C6050
C6049
C2001
C3021
L2006
L2011
L2001
L6005
L6007
L3004
C3043
L3003
C3026
C6035 C6043
L3018
C3044
L3013
CON7001
C3041
C3022
SOC7003
C2066
C3045
C3010
L3000
C2063
L3001
U3001
L7000
L3006
L3005
R4025
C2058
C7000
C7004
F3001 R4023
L3007
C3000
SOC7000
L3009
L2054
C3042
TP_FM_SPDY
C3008
U2007
C7005
C7045 C3049
C3037
OSC2000
TP_BT_SPDY_FROM_S3000
C3038
C3002
U3004
C7043
C3009
L3011
C3001
TP_WLAN_SPDY_FROM_S3000 TP_WLAN_SPDY_TO_S3000 TP_BT_SPDY_TO_S3000
L3010
U7013
R3000
U3003
C3006 C3004 C3003
TP_ACC_INT
C3011 L3012
U7012
L2055
C7042 C7044 C2069
C1097
C1098
L1073
C1095
L2024
C2033
C2064
C2059
C2068
C3047 R2001 L1074 L1072
R2002 C2067
C1102
C2065
C2060
C2030 C2044 C2056 L1079 C1096 C1126 C1127
C2061
L2056
F3002 C2038
PAM1000
L1075
L1078
C2029 C2043 C2034 C2057
C1100
C2039
L2010
C1108
L2048
C3046 L3014
C1101
C1109
TP_TDD_SW
U1005
C2027
L2008
C1107
C1099
C5021 C5024
C5149 C5146 C2051 C2050
GPS_SPEEDY
C2028
SC7002
C1118
C1117
C1116
C1120
L1076
C7001 C5025
C5062 C2040
U2005
C5147
C5028
C1125
C2026
C2042
C2041 C1122
L6002
R5028 C6010
C2004
L2000
C5027 L1084
C1105
C1104
C1106
C1119
R6009
C1114
L1082
R6021 C1112 C1113
C1110
C5043
R5012 L1080
C2017
C2013
R6023
R6022
C6036
L1083
F1014 C1103
L1081
C5088
C5089
C1115
R1007
R7007
R1005
C1124
C1111
C5081 L1077
C6038
C6041
C6045
C6042
C2020
C2019 L1036
SOC7004
C6013
C6014
R1006
C5106
C5097
C5098
C5087
C5080
C5105
C1089
L1071
L1051
L1046
L1064
L1052
L1060
L1059
L1061
L1070
L1055
L1033
C5101
C5078
C1123
C2072 L1040
C5096 L6006 L6008 C5054
R6010
R6011
C1062
C1004
C5082
C1093
C1079
C1088
C1087
L1068
C1092
C1094
C1081
C5086
C5090
C5091
L1063
L1062
C5095
C5092
C5093
L1037
L1032
TH1000
C5048
TP5007
C1005
C5076 R1003
F1006
CON1000
L1004
L1050
C5094 C5045
OSC5000
C6011 C6012
C5083
C1010
C1041
L1017
C1078
L1019
C1080
R7010
C5077
C1011
C1000
C1006
C5065
C1060
L1027
L1028
U5000
C5107
F1011
C5084
F1010 F1012
U1000
C1001
U1004
C1054
C1055
L1025
L1001
C5085
C5014
C5017
C5099
C5150
C1076
C1091
C1045
C1086
C1085
L1020
L1022
L1058
L1065
L1069
C1002 L1045
F1002
C1050
L1066 C1072
C5018 C5035
C1012
C1063
C1067
L1034
R7008
C1090 L1067
C1051
C5038
C1049
C5019 U1002 L1024
L1005
L1006
C1009
C5064
C5013
L1042
L1021
C1022
C1023
L1008
C5003
ANT101
C5058
C5053
C5051
C5052
C1032
C1033
L1011
C1061
L1031
L1029
C1030
C1021
C1013
C5001
C5000
C1031
C1017
C1018
F1008 U1001
C1038
C1039
L1014
C1083
L1056
L1053
C1036
C1028
C5009
C1019
L1007
C1043
C5057
C5023
C1007
C1008
L1003
C4001
L5002
L5001
C5022
L5003
L5004
C5005
C1046
C1034
C1084
C5002 R1000
L1009
C1026
L1010
L1054
C1077
C5007
C1014
C5016 L1002
F1009
C5032
C5031
L1044
C5129
C5132
C1052 L1016
C1069
ZD1000 C1027
C5061 L1000
C1025
C1024
C1047
C1035
L1018
L1012
C5030
C4002 C1003
ANT100
C1057
L1047
C5020
C1020
C4004
C5046
C1053 C1037
C5050 C5042 C5059 C1040
R3011
F1007
R3008
C3048
C5026
C5029
C1042
L1015
C4061 L1023
R1001 L1013
SC7001
C5039 C5055
R3007
C4005
C4063
C4003
C4055
C5015
C4007
C4000
LED5000
ANT3001 ANT3002
C4006
C4011
R4000
C4038
C4030
C4053
R6013
C5126
C5120
C5118
C5128
C4026
C4065
C4064
R5001 C4017
C4036 L2003
C4033
L2007
TP6000
C4037
R5000 C4042
C4056
C5040 C4046
C4029
C4031
C2008
C6023
R6008
C4010
C4047
C4014
C4054
C4009
C4040
R6016
C4059
C5034
C4051 C4032
RFS1000
C2005
C4048
R5011 C4041
C4024
C4052
C5121
C5115
C4012
C4057
U2001
L2002
C4049
ZD5002 C5117 C6026 C4039 C4058
C6027
C6022
C2007
R4005
R4006
C4015
C6025
C4019
C5127 C5136 C6030 C4028
C4045
C4034
C4050
C4035
C6024
TP_4000
TP_UB
TP_PWR
HDC4000
USB_P
SOC5000
USB_N
SOC3000 TP_VBAT
SOC6000
Model : SM-F127G
Revision : REV0.3
Manufacture Count : 324EA
Charge : 전훈남
Contact : 010-9492-7361
Date : 11/30
Routing :
Resin :
VX_SETUP(2020-09-29)_HHP
Created date of PCB data : 2020/11/24 11:27:07
SM-M127G
U3005
ANT6001
L2029
ANT6000
CON1001
L2028
C2073
U2000
C2003
L2004
L2032 L2025 F2001
F2002
CON1003
C2045
F2000
L2034
L2027
C2046
L2030
C2049
L2026
CON7000
L2033
L2052 L2049
SOC7001
F2006
L2040
L2020 L2018 L2053 C2062
U2006
CON1002
SIM5001 C2025
L2050
C2054 L2051
L2042
L2017
C2024
C2055
L2023 L2019 F2004
C2023
C2036
C2021
L2044
L2041
L2043
L2039
C2071
L2022
C2022
L2036
L2058
L2045
C2053
L2046
SIM5002
ZD7000
F2005
F2007
C2035
L2038
F2003
L2047
L2035
L2059 L2057
U2008
C7008
L7001
ZD7002
L2037
C2032 C7041
C7025
R4015
R4018
C7006
C7030
C7007
R5021
R5022
C5145
U7004
SIM5000 SIM5003
U7011
R7006
C7029
L7004
R7009
C7026
C7031
C7027
C7016
U7003
C7028
SOC7002
C7023
U7006
C7032
L7002
R7012
L7003
U7001
C7009
ZD7003
U7010
U7007
C7017
ZD7001
C7034
C7022
C7010
C7035
R7005
U7005
C7018
C7033
U7002
C7011
C7020
C7012
C7021
R4012 R4010
R4014 R4008
R7011
C5144
SC7000
R5018
R5017
TP_TCK
TP_NFC_FIRM
C2011
R1004 C2012
TP_NFC_CLK_REQ
L1048
TH4000
R4036
R4021
R4026
R4004
C3032
C3015
C3012
C6032
C6031
R3002
C3035
R5024
R4016
R6015
R4017
C2052
C3024 R3001
U2002
C6021
C6015
C3019
C3017
C3014
ZD5010
L6004
C3020
C3027
C1082
C6018
R5015
R5013
R5014
R5016
C6004
C6003
C6019
R4037
C4023
C6002
C3025
R6006
R6007
C5141
BOTH7000
C3007
UCP4000
R4022
C3028
C3029
TP5015
R5020
UME5000
R4001
R4024
U3002 C6020
R5009
L3008
R4013
R5019
R2000
R4011
C4020
C2010 C3005
C5102
D5000
C5079
C6008
C4018 C5074
C3016
R5006
D5001 C3030
TP_CLK
TP_SWDIO
TP3000
TP_NFC_EN
TP_NFC_IRQ
ANT5000
C3013
ANT5004
R6020 C4022 C5112
C3036 R3006
R4002
C6009
C5113
C6017 ZD5000
C5066
D6000 C5111
C6016
C5143
C5068
R5005
R5025
L6001
C6007
TP5013
R5023
C5137
L5005 C5067
L6000
ANT5001
TP_EMMC5000
TP5016
TP5011 ANT5002
C5138
TP5012
R5026
C5063 C5071
C5109
C5100
R6000
TP5010
C5072
C5056
C5110
R4027
TP5000
TP5001
C6058
C6056
C6001
C6000
C6040
ANT5003
C5044
R6005
R4003
C4043
C6034
U5003
C6055
C6057
U6003
C5037
C6037
TP5009
C5047
TP5008
GND
C5036
TP5005 TP5006
TP_RST TP_INTN
L6003
C6048 TP5004
L5000
R5007
C6044
Q5000
R6004
R6003
R6002
R5008
ID
R4028 C5073
R6026
ZD5001
C6052
R4009 R5010
R5052
R6025
R4020
R4019
R6001
R7002
R7000
R7001
C5151
C6033
R4007
D6001
ZD6000
R6024
C5119
C5122
C5133
R6028
U6002
C5134
C6028
C6029
R6027
C5033
ZD6001
R6012
TP6001
TP5003
C6046 C6047
BOOT1
JTAG4000 JTAG4001
CN4000
Model : SM-F127G
Revision : REV0.3
Manufacture Count : 324EA
Charge : 전훈남
Contact : 010-9492-7361
Date : 11/30
Routing :
Resin :
VX_SETUP(2020-09-29)_HHP
Created date of PCB data : 2020/11/24 11:27:07
SM-F127G
MIC6000
ANT2001
ANT3000
ANT3003
L2014
ANT2002
C2000
C3051
U2003
L2021 L2031
C3052
C2016
L2012
L2015
C3053
R3009
C3040
C2047
C2048
C6051
C6050
C6049
C2001
C3021
L2006
L2011
L2001
L6005
L6007
L3004
C3043
L3003
C3026
C6035 C6043
L3018
C3044
L3013
CON7001
C3041
C3022
SOC7003
C2066
C3045
C3010
L3000
C2063
L3001
U3001
L7000
L3006
L3005
R4025
C2058
C7000
C7004
F3001 R4023
L3007
C3000
SOC7000
L3009
L2054
C3042
TP_FM_SPDY
C3008
U2007
C7005
C7045 C3049
C3037
OSC2000
TP_BT_SPDY_FROM_S3000
C3038
C3002
U3004
C7043
C3009
L3011
C3001
TP_WLAN_SPDY_FROM_S3000 TP_WLAN_SPDY_TO_S3000 TP_BT_SPDY_TO_S3000
L3010
U7013
R3000
U3003
C3006 C3004 C3003
TP_ACC_INT
C3011 L3012
U7012
L2055
C7042 C7044 C2069
C1097
C1098
L1073
C1095
L2024
C2033
C2064
C2059
C2068
C3047 R2001 L1074 L1072
R2002 C2067
C1102
C2065
C2060
C2030 C2044 C2056 L1079 C1096 C1126 C1127
C2061
L2056
F3002 C2038
PAM1000
L1075
L1078
C2029 C2043 C2034 C2057
C1100
C2039
L2010
C1108
L2048
C3046 L3014
C1101
C1109
TP_TDD_SW
U1005
C2027
L2008
C1107
C1099
C5021 C5024
C5149 C5146 C2051 C2050
GPS_SPEEDY
C2028
SC7002
C1118
C1117
C1116
C1120
L1076
C7001 C5025
C5062 C2040
U2005
C5147
C5028
C1125
C2026
C2042
C2041 C1122
L6002
R5028 C6010
C2004
L2000
C5027 L1084
C1105
C1104
C1106
C1119
R6009
C1114
L1082
R6021 C1112 C1113
C1110
C5043
R5012 L1080
C2017
C2013
R6023
R6022
C6036
L1083
F1014 C1103
L1081
C5088
C5089
C1115
R1007
R7007
R1005
C1124
C1111
C5081 L1077
C6038
C6041
C6045
C6042
C2020
C2019 L1036
SOC7004
C6013
C6014
R1006
C5106
C5097
C5098
C5087
C5080
C5105
C1089
L1071
L1051
L1046
L1064
L1052
L1060
L1059
L1061
L1070
L1055
L1033
C5101
C5078
C1123
C2072 L1040
C5096 L6006 L6008 C5054
R6010
R6011
C1062
C1004
C5082
C1093
C1079
C1088
C1087
L1068
C1092
C1094
C1081
C5086
C5090
C5091
L1063
L1062
C5095
C5092
C5093
L1037
L1032
TH1000
C5048
TP5007
C1005
C5076 R1003
F1006
CON1000
L1004
L1050
C5094 C5045
OSC5000
C6011 C6012
C5083
C1010
C1041
L1017
C1078
L1019
C1080
R7010
C5077
C1011
C1000
C1006
C5065
C1060
L1027
L1028
U5000
C5107
F1011
C5084
F1010 F1012
U1000
C1001
U1004
C1054
C1055
L1025
L1001
C5085
C5014
C5017
C5099
C5150
C1076
C1091
C1045
C1086
C1085
L1020
L1022
L1058
L1065
L1069
C1002 L1045
F1002
C1050
L1066 C1072
C5018 C5035
C1012
C1063
C1067
L1034
R7008
C1090 L1067
C1051
C5038
C1049
C5019 U1002 L1024
L1005
L1006
C1009
C5064
C5013
L1042
L1021
C1022
C1023
L1008
C5003
ANT101
C5058
C5053
C5051
C5052
C1032
C1033
L1011
C1061
L1031
L1029
C1030
C1021
C1013
C5001
C5000
C1031
C1017
C1018
F1008 U1001
C1038
C1039
L1014
C1083
L1056
L1053
C1036
C1028
C5009
C1019
L1007
C1043
C5057
C5023
C1007
C1008
L1003
C4001
L5002
L5001
C5022
L5003
L5004
C5005
C1046
C1034
C1084
C5002 R1000
L1009
C1026
L1010
L1054
C1077
C5007
C1014
C5016 L1002
F1009
C5032
C5031
L1044
C5129
C5132
C1052 L1016
C1069
ZD1000 C1027
C5061 L1000
C1025
C1024
C1047
C1035
L1018
L1012
C5030
C4002 C1003
ANT100
C1057
L1047
C5020
C1020
C4004
C5046
C1053 C1037
C5050 C5042 C5059 C1040
R3011
F1007
R3008
C3048
C5026
C5029
C1042
L1015
C4061 L1023
R1001 L1013
SC7001
C5039 C5055
R3007
C4005
C4063
C4003
C4055
C5015
C4007
C4000
LED5000
ANT3001 ANT3002
C4006
C4011
R4000
C4038
C4030
C4053
R6013
C5126
C5120
C5118
C5128
C4026
C4065
C4064
R5001 C4017
C4036 L2003
C4033
L2007
TP6000
C4037
R5000 C4042
C4056
C5040 C4046
C4029
C4031
C2008
C6023
R6008
C4010
C4047
C4014
C4054
C4009
C4040
R6016
C4059
C5034
C4051 C4032
RFS1000
C2005
C4048
R5011 C4041
C4024
C4052
C5121
C5115
C4012
C4057
U2001
L2002
C4049
ZD5002 C5117 C6026 C4039 C4058
C6027
C6022
C2007
R4005
R4006
C4015
C6025
C4019
C5127 C5136 C6030 C4028
C4045
C4034
C4050
C4035
C6024
TP_4000
TP_UB
TP_PWR
HDC4000
USB_P
SOC5000
USB_N
SOC3000 TP_VBAT
SOC6000
Model : SM-F127G
Revision : REV0.3
Manufacture Count : 324EA
Charge : 전훈남
Contact : 010-9492-7361
Date : 11/30
Routing :
Resin :
VX_SETUP(2020-09-29)_HHP
Created date of PCB data : 2020/11/24 11:27:07
SM-F127G
U3005
ANT6001
L2029
ANT6000
CON1001
L2028
C2073
U2000
C2003
L2004
L2032 L2025 F2001
F2002
CON1003
C2045
F2000
L2034
L2027
C2046
L2030
C2049
L2026
CON7000
L2033
L2052 L2049
SOC7001
F2006
L2040
L2020 L2018 L2053 C2062
U2006
CON1002
SIM5001 C2025
L2050
C2054 L2051
L2042
L2017
C2024
C2055
L2023 L2019 F2004
C2023
C2036
C2021
L2044
L2041
L2043
L2039
C2071
L2022
C2022
L2036
L2058
L2045
C2053
L2046
SIM5002
ZD7000
F2005
F2007
C2035
L2038
F2003
L2047
L2035
L2059 L2057
U2008
C7008
L7001
ZD7002
L2037
C2032 C7041
C7025
R4015
R4018
C7006
C7030
C7007
R5021
R5022
C5145
U7004
SIM5000 SIM5003
U7011
R7006
C7029
L7004
R7009
C7026
C7031
C7027
C7016
U7003
C7028
SOC7002
C7023
U7006
C7032
L7002
R7012
L7003
U7001
C7009
ZD7003
U7010
U7007
C7017
ZD7001
C7034
C7022
C7010
C7035
R7005
U7005
C7018
C7033
U7002
C7011
C7020
C7012
C7021
R4012 R4010
R4014 R4008
R7011
C5144
SC7000
R5018
R5017
TP_TCK
TP_NFC_FIRM
C2011
R1004 C2012
TP_NFC_CLK_REQ
L1048
TH4000
R4036
R4021
R4026
R4004
C3032
C3015
C3012
C6032
C6031
R3002
C3035
R5024
R4016
R6015
R4017
C2052
C3024 R3001
U2002
C6021
C6015
C3019
C3017
C3014
ZD5010
L6004
C3020
C3027
C1082
C6018
R5015
R5013
R5014
R5016
C6004
C6003
C6019
R4037
C4023
C6002
C3025
R6006
R6007
C5141
BOTH7000
C3007
UCP4000
R4022
C3028
C3029
TP5015
R5020
UME5000
R4001
R4024
U3002 C6020
R5009
L3008
R4013
R5019
R2000
R4011
C4020
C2010 C3005
C5102
D5000
C5079
C6008
C4018 C5074
C3016
R5006
D5001 C3030
TP_CLK
TP_SWDIO
TP3000
TP_NFC_EN
TP_NFC_IRQ
ANT5000
C3013
ANT5004
R6020 C4022 C5112
C3036 R3006
R4002
C6009
C5113
C6017 ZD5000
C5066
D6000 C5111
C6016
C5143
C5068
R5005
R5025
L6001
C6007
TP5013
R5023
C5137
L5005 C5067
L6000
ANT5001
TP_EMMC5000
TP5016
TP5011 ANT5002
C5138
TP5012
R5026
C5063 C5071
C5109
C5100
R6000
TP5010
C5072
C5056
C5110
R4027
TP5000
TP5001
C6058
C6056
C6001
C6000
C6040
ANT5003
C5044
R6005
R4003
C4043
C6034
U5003
C6055
C6057
U6003
C5037
C6037
TP5009
C5047
TP5008
GND
C5036
TP5005 TP5006
TP_RST TP_INTN
L6003
C6048 TP5004
L5000
R5007
C6044
Q5000
R6004
R6003
R6002
R5008
ID
R4028 C5073
R6026
ZD5001
C6052
R4009 R5010
R5052
R6025
R4020
R4019
R6001
R7002
R7000
R7001
C5151
C6033
R4007
D6001
ZD6000
R6024
C5119
C5122
C5133
R6028
U6002
C5134
C6028
C6029
R6027
C5033
ZD6001
R6012
TP6001
TP5003
C6046 C6047
BOOT1
JTAG4000 JTAG4001
CN4000
8. Level 3 Repair
8-4-1. Power On
Yes
No
No Charging the battery by TA.
Check the Battery Voltage. If its voltage level is extremely low
Is it more than 3.8V?
(under 3.0V),
Change the battery.
Yes
No
No
Yes
No #1 Check the output voltage of U5000
L5001 > 0.75V, L5002 > 0.75V, L5003 >
0.75V, L5004 > 1.35V,L5006 > 2.0V
No
Check the signal of ※ Each voltage level has ±10% margin
TRST_N = 1.8V → Replace the U5000 or the PBA If the
voltage level is abnormal,
#2 Check the Clock OSC2000.
Frequency is 26MHz
※ Test condition (Oscilloscope setting)
- 20.0ns/div (time division)
Yes - 500mV/div (voltage)
No → Replace the OSC2000.
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-2. Initial
Initial Failure
Yes
No
Abnormal
No
Abnormal Check the OSC2000(Crack, open etc.)
Re Check "Power on"
Trouble shooting process
Check the U5000 (Crack etc)
Normal
Change U5000
Abnormal
Change PBA
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-3. No Service
No service
Yes
No
Yes
No
No
Check the Voltage
Replace the U5000
L5004 = 1.35V
Yes
No
No
Check the clock OSC2000
Is the frequency 26MHz? Replace the OSC2000
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Is SIM socket ok? Replace SIM socket
Yes
No
No Change the SIM card.
Check the SIM Voltage.
(C5149, C5144) 1.8V or 3.0V? If it still doesn’t work after changing,
Check the U5000 (Crack etc)
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Is SIM socket ok? Replace SIM socket
Yes
No
No Change the T-Flash card.
Check the SIM Voltage.
(C5146 = 3.0V?) If it still doesn’t work after changing,
Check the U5000 (Crack etc)
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Insert TA / USB
Yes
No
Charging Sequence Start
VBUS_OVP (C6028) = 5V or 9V Replace SUB PBA or CTC FPCB
Yes
No
Check the
VBUS_IF (C6029)=5V or 9V Replace U6002
Yes
No
Battery is Charging? Replace U5003
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-7. OTG
Yes
No
Check the
VBUS_OVP (C6028) = 5V Replace SUB PBA or CTC FPCB
Yes
No
Check the Check U6002
VBUS_IF(C6029) = 5V
(crack, open, damaged, etc.)
Yes
No
Check OTG working ? Replace U5003
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the voltage
C2010=3.3V Replace U5000
Yes
No
No
Check SDA SCL pin (U2002) Replace UCP4000
(SPI is OK?)
Yes
No
Abnormal
Check U2002
(crack, open, etc.) Replace U2002
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the voltage Replace U5000
C3049 =1.8V
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Did you change Main PCB or
Finger sensor? Do calibration.
Yes
No
No
Check Finger sensor Connector. Replace Finger Sensor
Is it OK?
and Do calibration
Yes
No
Check the Fingerprint Sensor
No
SPI Line and
Replace Main PCB
Voltage(C3048=3.3V) and Do calibration
OK?
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the No
SUB_MIC_P data at Replace MIC6000
L6011
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the USB C2C FPCB No Reconnect the SOC6000 (MAIN PBA),
connector on Main PBA and SOC1000 (SUBPBA)
Sub PBA
Yes
No
Yes
No
No
Check the PWM output
at L6009, L6010 Replace U6003 (MAIN PBA)
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
No
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-12. Display
YES
YES
Check NO
VSN_-5P9 = -5.9V (C6016) Resolder or Replace the U6001(3.0V)
VSP_5P9 = 5.9V (C6020) Resolder or Replace the U5000(1.8V)
VDD_LCD_1P8 = 1.8V (C6026)
YES
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the Camera connector on Main
Reconnect the SOC7001, SOC7002, SOC7003,
PBA
SOC7004
Yes
Yes
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the Camera connector on Main
Reconnect the SOC7000
PBA
Yes
C7005 : 1.2V
Yes
No
Check the FCAM_MCLK(C7003)Check
Replace the PBA
the VTCAM_MCLK is
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-15. TSP
Yes
No
No
Check the connection of
SOC6000 at Main PBA Reconnect the SOC6000, SOC1000
SOC1000 at SUB PBA
Yes
No
Check the TSP SPI lineCheck No
the voltage Resolder or Replace UCP4000
VDD_TSP_1.8V (SUB L2003) = 1.8V
VDD_TSP_3.0V (SUB L2004) = 3.3V
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-16. Motor
No
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-17. BT/WIFI
YES
NO
Check BT or WIFI function ON Enable BT or WIFI function
YES
YES
NO
Check RF Path Resolder or change
F3000, C3023, L3007 F3000, C3023, L3007
YES
YES
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-18. GPS
YES
NO
Check GPS function ON Enable GPS function in the setting
YES
YES
YES
YES
NO
Check 26MHz Clock at output of OSC2000 Replace the OSC2000
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
NO
Check NFC function ON Enable NFC function in the setting
YES
NO
Check the Antenna contact Resolder or change
ANT3001, ANT3002 ANT3001, ANT3002
YES
NO
Check the Voltage on Check U3002
C3018 = 1.8V (crack, open, damaged, etc.)
YES
NO
Check 26MHz Clock at
Check UCP4000
TP_NFC_CLK_26M
YES
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
FM is not working
YES
NO
Check the FM function Enable FM function
YES
NO
Check the SUB PBA Resolder or change
U1011, C1030 U1011, C1030
YES
YES
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
YES
YES
Check U2005 NO
Resolder or change
any damage
U2005
(Crack, open, etc), is it ok?
YES
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
NO
Check ant path any damage Resolder or change
(ANT100/ANT101 ~ U1005) Antenna path components
YES
YES
YES
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
YES
YES
YES
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
YES
YES
Resolder or change
Check TX path any damage NO
TX path(U1000 ~ U2005)
(U1000 ~ U2005)
components
(Crack, open, etc), is it ok?
YES
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
NO
Check ant path any damage Resolder or change
(ANT100/ANT101 ~ U1005) Antenna path components
YES
YES
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.