Scribd
Upload
84 views

Item Number: 173U1428: Type: BG80Z-11/D11LA4-TF-FV-K/E075B9/C1-SP

This document summarizes the specifications of a helical-geared motor with a single-disc spring setting brake. It includes details about the motor such as its power, mounting position, output shaft speed, and dimensions. Additional information provided includes the gear design, motor design, and brake design specifications. Cautions are noted regarding properly matching the motor and converter voltage and frequency, and supplying the fan from a separate network during variable frequency operation.

Uploaded by

sdgsghdfh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
84 views

Item Number: 173U1428: Type: BG80Z-11/D11LA4-TF-FV-K/E075B9/C1-SP

This document summarizes the specifications of a helical-geared motor with a single-disc spring setting brake. It includes details about the motor such as its power, mounting position, output shaft speed, and dimensions. Additional information provided includes the gear design, motor design, and brake design specifications. Cautions are noted regarding properly matching the motor and converter voltage and frequency, and supplying the fan from a separate network during variable frequency operation.

Uploaded by

sdgsghdfh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Item number: 173U1428

Helical-geared motor with Single-disc spring setting brake


Type : BG80Z-11/D11LA4-TF-FV-K/E075B9/C1-SP
Motor power (kW) : 5,5 Mounting : B3
Output shaft speed (rpm) : 15,5 Terminal box position :I/A
Dimensional drawing : BG80-BG80Z
Corrosion protection : Coro 1 Catalogue : DG 07
Painting : RAL 2004 net weight per unit : ca. 273 kg

Suitable for operation on static converter


in the frequency range :5 - 60 Hz
Voltage : 54 - 440 V Y
Output : 0,475 - 5,4 kW
synchron speed : 1,3 - 16,0 rpm
Constant torque : 3400 Nm
Load current approximately : 10,7 A
Service factor : 1,25

Gear design:
Type : BG80Z 3 -staged Helical gear
Design code 11 : foot with clearance hole on side bottom
: solid output shaft on gear side front
Total gear reduction i : 112,4
Add.-/Special design: Special output shaft nach ZN.BG80-30-A3-K12. ((d x l): 80 mm x 160 mm)

Design of the motor:


Type : Three-phase squirrel cage motor D11LA4-TF-FV-K
Voltage (V) : 440 Rated speed (rpm) : 1710
Connection :Y IP prot. type per EN 60529 : IP 65
Frequency (Hz) : 60 IC cool. type EN 60034-6 : IC 416
Rated current (A) : 10,7 Design acc. to DIN VDE 0530-1/EN 60034-1
Power factor (cos phi) : 0,85 Terminal box size : TB222
Temperature class :F
Add.-/Special design: With built in thermistors for release per supplemental connection diagram ZK010.1040-14.

With installed vendor-supplied fan


in wide range voltage design
Connection: 3 phase 220 to 290 V; 380 to 500 V; 50 Hz
Connection: 3 phase 220 to 332 V; 380 to 575 V; 60 Hz
Connection: 1 phase 230 to 277 V 50 Hz

Design of the brake: Brake below the fan cowl


Type : Single-disc spring setting brake E 075 B 9
Rated braking torque : 70 Nm Setting : 70 Nm
IP prot. type per EN 60 529 : IP 65 supplemental dim. drawing : N-BR-FBI-1
Coil voltage : 24 V
Corrosion protection : Coro 1
Connection voltage DC : 24 V

Please note:
Motor
Motor connection by means of CAGE-CLAMP.
CAGE CLAMP is a Registered Trademark of the company WAGO

Please check whether the allocation of voltage and frequency for the motor and converter match.

Caution!! The maximum converter output voltage is greater than 400 V.


In lines of over 10 meters between converter and motor and converter with rapid-switching
power semiconductors, such as IGBT, reflections can cause dangerously high voltage spikes
which lead to damage to the winding insulation. Converters with output filters
prevent this. An additional achievement is achieved by the star connection of the
winding.
Vendor-supplied fan
When operating at various frequencies (frequency jumping, converter operation) the outside fan must be
supplied from a separate network (possibly a control network).

You might also like