Wireless Controller for N-SL

Model NO.SW001

USER GUIDE
Product Description
This product is a wireless Bluetooth gamepad, which belongs to the wireless
blue control gamepad (using wireless Bluetooth technology). It can be remotely
controlled and easy to operate. It can be used for the Switch console. It also
supports PC x-input PC games.

Product Parameter
Voltage: DC 3.6-4.2V Charging time: 2-3 hours
Working Current: <30mA Vibration Current: 90-120mA
Sleep Current: 0uA Charging Current: >350mA
Battery Capacity: 550mAh USB length: 70 cm/2.30 ft
Use time: 6-8 hours Bluetooth Transmission Distance <8m

Button Instructions
The gamepad consists of 19 digital buttons (UP, DOWN, LEFT, RIGHT, A, B, X, Y
, L1, R1, L2, R2, L3, R3, -, +, TURBO, HOME, screenshot); two analog 3D joystick
composition.

L-stick & R-stick : The new 360-degree design makes operating the joystick
easier and more convenient.

The indicator lights flask quickly, indicating the pairing; if the blue light is
always on then the pairing is complete.

D-pad button *4: Up, Down, Left, Right.

Action button *4: A, B, X, Y.
R Button L Button
Menu button:
ZR Button
"H"-HOME;
ZL Button
Type-C Charging Port
"T"-TURBO;
"O"-Capture;
"+"-Menu selection +;
"-"-Menu selection-. Button - Button +

Function keys *4 : L/R/ZL/ZR

Turbo Button
ABXY Button
Screenshot Button
D-pad Button

Home Button

Left control Right control

Pairing and Connecting
Bluetooth connection in console mode: ZL

Step 1: Turn on the console, click the System settings menu button on the main
page interface (Figure ①), enter the next menu option, click the Airplane Mode
option (Figure ②), and then click the Controller Connection (Bluetooth) (Figure ③)
option Turn on its Bluetooth function (Figure ④).

① ②

③ ④

Step 2: Enter the Bluetooth pairing mode of the console and controller, click the
Controllers menu button on the console homepage interface (Figure ⑤), enter
the next menu option and click the Change Grip/Orde option. The console will
automatically search for paired controllers (Figure ⑥).

⑤ ⑥
Step 3: Press and hold the HOME button for 3-5 seconds to enter the Bluetooth
search pairing mode, LED1-LED4 marquee flashes quickly. After the controller is
successfully connected to the console, it vibrates and automatically assigns the
corresponding channel indicator of the controller to be steady on.

⑦ ⑧

Console mode wired connection：

Turn on the wired connection option of the PRO controller on the console, put the
console into the console base, and then connect the controller via the data cable,
the controller will automatically connect to the console, after the data cable is pulled
out, the controller will automatically connect back to the console console via
Bluetooth.
Windows (PC360) mode:
When the controller is turned off, connect to the PC via a USB cable, and the PC
will automatically install the driver. The LED2 on the controller is long on to indicate
a successful connection.
The display name: Xbox 360 controller for windows .(wired connection)

TURBO Function Setting

The controller has the TURBO function, hold down the TURBO button and then
press the corresponding button to set the TURBO.
In SWITCH mode, A, B, X, Y, L1, R1, L2, R2 can be set
In XINPUT mode, you can set A, B, X, Y, L1, R1, L2, R2

Adjust Turbo speed:

Turbo + right 3d up, the frequency increases by one gear
Turbo + Right 3d down the frequency by one gear
The power-on default is 12Hz; there are three levels (5 times per second --- 12
times per second --- 20 times per second). When the Turbo combo is executed,
the Turbo combo speed LED1 flashes accordingly as the Turbo indicator.
Motor Vibration Function
The controller has a motor function; it uses a pressure-sensitive motor; the
console can manually turn on or off the controller motor vibration. ON/OFF

Motor intensity can be adjusted under SWITCH platform

Adjust the motor intensity:
turbo+ left 3d up, the intensity increases by one gear
turbo+ left 3d down, the intensity is reduced by one gear
A total of 4 levels:
100% strength, 70% strength, 30% strength, 0% strength, Power-on default
100%

Frequently Asked Questions

1. The situation where the controller needs to be reset: When there is an
abnormality, such as a button disorder, crash, failure to connect, etc., you can
try to restart the controller.

2. Unable to connect to the console under abnormal conditions:

A. The channel indicator of the HOME button flashes quickly, please pay
attention to whether the 4 LED lights flash fast or slowly. If there is a slow flash
or not 4 LED lights flash, you can reset the controller or long press HOME Key
to close the controller and reconnect.

B. Please check whether you enter the controller connection page according to
the operation, and the console enters the state of Figure ⑦.

C. After the connection is successful, the indicator will be assigned according to

the console. The controller at position 1 will keep on with the first light, the
controller at position 2 will keep on with the 1.2 light, and so on.
Power off/Charge/Reconnect/Reset/Low Battery Alarm
status Description
When the controller is turned on, press and hold the HOME
button for 5S to turn off the controller.
When the controller is in the back-connecting state, it will
automatically shut down when it cannot be connected after
30 seconds.
power off
When the controller is in the state of code matching, it will
enter back connection when the code cannot be matched
after 60 seconds, and it will automatically shut down .
When the controller is connected to the machine, it will
automatically shut down when there is no button operation
within 5 minutes .
When the controller is turned off and the controller is inserted
into the adapter, LED 1-4 flashes, after fully charged, LED
1-4 goes out.
charge
The controller is online, when the controller is plugged into
the USB, the corresponding channel light flashes slowly, and
it lights up when it is full.
The console wakes up and reconnects: After the controller is
connected to the console, the console is in sleep state, the
controller connection indicator is off, short press the
controller HOME button, the indicator light flashes slowly and
the marquee flashes back to wake up the console. The
Reconnect console wakes up in about 3-10 seconds on. (The console
wake-up state can only be effective by pressing the HOME
key)
Reconnect when the console is powered on: When the
console is powered on, press any key on the controller to
reconnect (the left and right 3D/L3/R3 cannot be connected
back)
When the controller is abnormal, such as button disorder,
crash, failure to connect, etc., you can try to restart the
reset controller. Reset method: Insert a slender object into the
Reset hole on the back of the controller, and press the Reset
button to reset the controller state.
 When the controller battery voltage is lower than 3.6V
(according to the principle of battery characteristics), the
Low battery alarm light of the corresponding channel flashes slowly,
indicating that the controller is low and needs to be
charged. 3.45V low power shutdown.

Precautions
DO NOT use this product near fire sources;

DO NOT place the product in a humid or dusty environment;

DO NOT expose to direct sunlight or high temperature;

DO NOT use chemicals such as gasoline or thinner;

DO NOT hit the product or make it fall due to strong impact;

DO NOT bend or pull the cable parts strongly;

DO NOT disassemble, repair or modify.

Package
1 X Controller

1 X USB Charging Cable

1 X User Instruction
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment