Project JHA For Grading Compacting Works
Project JHA For Grading Compacting Works
Job Description: Grading and compacting works Permit Type & No.: Excavation/
Equipment movement
100 - Attachment
12.1_JHA 001_After QP review.docx
1
, 202
,Nov 28
14 pm
A at 4:
ARR
HAB
arek G
By T
JOB HAZARD ANALYSIS
1 Mobilization of P= 3XB (M) All personnel entering worksite should P= 1XB (L) Site Engineer /
Unauthorized entry to work
personnel, materials & A= 2XB (L) have Valid gate passes. A= 1XB (L) Supervisor/
site
equipment. E=2XB (L) Personnel will be advised to check the E=1XB(L) Safety Officer
(DG, grader, Dozer, R= 3XB (M) validity of their gate pass before leaving R= 1XB(L)
shovel/excavator, the accommodation.
compactor, skid loader) All contractor personnel must have
medical fitness to work certificate prior to
site mobilization.
Applicable TPC to competent person/
operators/equipment.
Wear mandatory PPE (Coverall, hard hat,
earmuff, safety shoes, hand gloves &
safety glass etc).
All newly arrived personnel should attend
the project HSE induction.
Ensure all employees have been trained
for New 9 QatarEnergy Life Saving Rules
and same shall be discussed during daily
TBT.
COVID 19 outbreak P= 3XC (M) Prior check of temperature before leaving P= 1XB (L) Site Engineer /
A= 2XB (L) camp. A= 1XB (L) Supervisor/
(Pandemic)
E=2XB(L) E=1XB(L) Safety Officer
1
, 202
ov 28
4 pm, N
A at 4:1
BARR
GHA
arek
By T
JOB HAZARD ANALYSIS
Adverse weather condition - P= 3XB (M) Weather alert and forecast to team. P= 1XB (L) Site Engineer /
Heat Stress impact A= 2XB (L) Plan the work according to the weather A= 1XB (L) Supervisor/
Windy (25 knots or more), E=2XB(L) forecast. E=1XB(L) Safety Officer
foggy condition causing poor R= 3XB (M) Provide adequate cool drinking water R= 1XB(L)
visibility. Report any discomfort to site
supervisor/safety officer.
Rain and Thunderstorm Good working condition of A/C in all
Sandstorm Vehicle and equipment cabins.
During poor visibility conditions stop the
work and demobilize workers to the rest
shelter/lay down area.
If possible, avoid work during windy
condition.
Suspend all lifting activity during poor
visibility.
Ensure 100% eye protection and
respiratory protection during high wind.
Emergency situation - Poor P= 3XB (M) Educate the workforce about emergency P= 1XB (L) Site Engineer /
communication A= 2XB (L) procedure A= 1XB (L) Supervisor/
E=2XB(L) In case of any emergency all work will be E=1XB(L) Safety Officer
Improper access/ Egress R= 3XB (M) stopped, shut down all running R= 1XB(L)
1
, 202
ov 28
4 pm, N
A at 4:1
BARR
GHA
arek
By T
JOB HAZARD ANALYSIS
Defective survey and P= 3XB (M) Ensure that all survey equipment is P= 1XB (L) Site Engineer /
scanning equipment and A= 2XB (L) calibrated and carrying valid calibration A= 1XB (L) Supervisor/
damaged hand tools E=2XB(L) certificate. E=1XB(L) Safety Officer
R= 3XB (M) Ensure all battery-operated equipment R= 1XB(L)
shall be inspected with approved
checklist and valid gate pass.
Ensure NO removal /replacement of any
battery in site.
Remove all the damaged tools
immediately from site.
Obtain MIC CPW Certificate, Permit
Authorized WSS supervisor and Safety
Officer shall be on site at all times. No
work shall commence without the
presence of the Worksite Supervisor.
5 Hammering of rebars Pinch Points/ Sharp edges P= 3XB (M) Pre-task briefing before commencing the P= 1XB (L) Site Engineer /
and marking A= 2XB (L) task. A= 1XB (L) Supervisor/
E=2XB(L) E=1XB(L) Safety Officer
1
, 202
ov 28
4 pm, N
A at 4:1
BARR
GHA
arek
By T
JOB HAZARD ANALYSIS
1
, 202
ov 28
4 pm, N
A at 4:1
BARR
GHA
arek
By T
JOB HAZARD ANALYSIS
Vehicular traffic /personnel P= 3XB (M) Effective traffic management and P= 1XB (L) Site Engineer /
movement A= 2XB (L) signages to be followed at site. A= 1XB (L) Supervisor/
E=2XB(L) Ensure to follow QatarEnergy Road safety E=1XB(L) Safety Officer
Poor communication R= 3XB (M) rules and defensive driving. R= 1XB(L)
Provide separate route for pedestrians
Uneven ground/ loose soil and vehicle movement.
surface Ensure equipment travel route shall be
assessed.
Blind spots Drivers/operators never use the mobile
while driving.
Follow the MIC speed limit 40kmh and
construction site speed limit 20kmh.
Ensure a trained banks man shall be
employed to guide vehicle near live
stationery facility
Revers horn to all the equipment and
with revolving light on all heavy vehicle
and equipment’s.
1
, 202
ov 28
4 pm, N
A at 4:1
BARR
GHA
arek
By T
JOB HAZARD ANALYSIS
1
, 202
ov 28
4 pm, N
A at 4:1
BARR
GHA
arek
By T
JOB HAZARD ANALYSIS
Dust P= 3XB (M) Ensure slow pouring of soil with hand P= 1XB (L) Site Engineer /
A= 2XB (L) shovels. A= 1XB (L) Supervisor
E=2XB(L) Ensure no one near the sloppy area E= 1XB (L)
R= 3XB (M) where the back filling in progress R= 1XB (L)
Ensure to cover the soil with tarpaulins to
avoid them from getting scattered due to
wind
Ensure to cover the soil is adequately
covered
Ensue to wear Dust mask while carrying
out the activity
Poor Manual handling P= 3XB (M) Explain proper manual handling P= 1XB (L) Site Engineer /
A= 2XB (L) techniques during TBT. A= 1XB (L) supervisor /HSE
Fatigue E=2XB(L) Train personnel on manual handling, E= 1XB (L) Officer
R= 3XB (M) Do not exceed individual capacity more R= 1XB(L)
than 20 Kg as per safe manual handling
technique while handling the loads and
take mechanical aids wherever necessary
Job rotation
Educate on body stretch out positions.
1
, 202
ov 28
4 pm, N
A at 4:1
BARR
GHA
arek
By T
JOB HAZARD ANALYSIS
Equipment Breakdown / P= 2XB (L) Preventive maintenance of heavy P= 1XB (L) Site Engineer /
Maintenance A= 3XB (M) equipment will not be allowed on site A= 1XB (L) Supervisor
E=2XB (L) Obtain permit for carrying out emergency E= 1XB (L)
R= 3XB (M) repair work. R= 1XB(L)
Harmful Exhaust to P= 3XB (M) Use appropriate respiratory protection P= 1XB (L) Site Engineer /
operator A= 2XB (L) Work in well ventilated area (open place) A= 1XB (L) Supervisor
E=2XB(L) E= 1XB (L)
R= 3XB (M) R= 1XB(L)
Exposure to vibration P= 3XB (M) Use appropriate PPE specially hand P= 1XB (L) Site Engineer /
A= 2XB (L) gloves. A= 1XB (L) Supervisor
E=2XB(L) Ensure proper grip on the handle of the E= 1XB (L)
R= 3XB (M) equipment to reduce vibration. R= 1XB(L)
Ensure work rest/ rotation.
Pinch Points/ Sharp edges P= 3XB (M) Wear heavy duty gloves while hammering P= 1XB (L) Site Engineer /
and line of fire A= 2XB (L) pegs. A= 1XB (L) Supervisor/
E=2XB(L) Ensure roller shall be driven keeping out E=1XB(L) Safety Officer
R= 3XB (M) of line of fire. R= 1XB(L)
Ensure while parking in designated area.
1
, 202
ov 28
4 pm, N
A at 4:1
BARR
GHA
arek
By T
JOB HAZARD ANALYSIS
11 Working at night-time Poor illumination P= 3XB (M) Approval for night shift activity from P= 1XB (L) Site Engineer /
A= 2XB (L) concern QatarEnergy authority. A= 1XB (L) Supervisor/
Tripping or fall E=2XB(L) Plan work to limit night working E=1XB(L) Safety Officer
R= 3XB (M) Provide specific instructions for night R= 1XB(L)
Fatigue tasks e.g. vehicle moments to be
restricted.
Collision with structure Adequate barriers in place around lifting
area.
Vehicles & operatives Provide adequate lighting 100 Lux min for
checking points
Unsafe access Ensure adequate medical attendance
available during night shift.
Cold temperature In Access crossing points, flagman to be
provided with equipment.
Equipment to be fitted with reverse alarm
and revolving lights.
Follow site speed limits- MIC 40kmh and
construction site 20 kmh.
Reduce the speed on crossing passage
and respect the signages.
Dedicated workforce for night shift
operations.
1
, 202
ov 28
4 pm, N
A at 4:1
BARR
GHA
arek
By T
JOB HAZARD ANALYSIS
1
, 202
ov 28
4 pm, N
A at 4:1
BARR
GHA
arek
By T
QatarEnergy HSE: PNS/11, Sr.HSE Engineer, 28-11-21