SATRA

Accredited Laboratory

SATRA
TECHNOLOGY CENTRE

a member of

FDDI INTERNATIONAL TESTING CENTRE, CHENNAI PHYSICAL LABORATORY PRICE LIST

S.No. 1 1.1 1.2 a. b. 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.21 2.22 2.23 2.24 2.25 2.26

Services COMPLETE FOOTWEAR Shoe water proofness Shoe flexing at room temperature Casual shoes Sports/heavy duty shoes Shoe flexing at low temperature Heel attachment strength Strap attachment Strength of attachment of Bows & Trims Whole shoe top line strength SATRA sole adhesion test 16 point bondability test Calibration Leakage resistance LEATHER/SYNTHETICS/UPPER MATERIALS Flexing resistance at room temperature Flexing resistance at low temperature Tensile strength & extension at break Seam strength/Stitch tear Induced tear strength Tongue tear Burst strength Adhesion of coating (synthetics) Dynamic water resistance Break pipiness Wrinkleometer test Surface water absorption Water vapour permeability Water vapour coefficient Adhesion of finish (Tape test) Blocking test Heat fastness of finish Taber abrasion Light fastness Wet/dry/Solvent rub fastness Colour migration (Water/Perspiration) Shrinkage Test Fungus growth Cold crack temperature Martindale abrasion Crockmeter (Dry & Wet)

Charges in Rupees 500 1200 1200 2000 600 600 600 600 600 1400 1200 600

700 2000 600 600 600 600 600 600 600 100 100 200 600 600 100 600 250 600 1200 400 800 600 1000 2000 1000 400

SATRA
Accredited Laboratory

SATRA
TECHNOLOGY CENTRE

a member of

3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 3.20 a b c d 3.21 3.22 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 5 5.1 5.2 5.3 6 6.1 6.2 6.3 6.4

PLASTICS / RUBBERS/ PU FOAMS/ SOLING MATERIALS Specific gravity/density Tensile strength & elongation at break Hardness Ross/Bennerwart flexing index at room temp. Ross/Bennerwart flexing index at low temp. SATRA/BATA belt flexing Oil swelling Compression set Split tear strength Die "C" tear test Heat shrinkage % Volatile loss Abrasion Bond strength (raw material) Bond strength (prepared sample) Light fastness Tear strength Slip resistance per surface Izod Impact Ozone resistance Up to 100 hrs for 1st sample Up to 100 hrs for next 3 samples per sample Up to 200 hrs for 1st sample Up to 200 hrs for next 3 samples per sample Chemical resistance per chemical Hardness of PU foams(Seats) INSOLES Tensile strength Flexing index Split tear strength Water uptake/loss Rub fastness dry/wet each Surface water absorption Laminar strength Shear strength Heel pin holding strength Scuff/abrasion resistance Peel strength Longitudinal stiffness Stitch tear of insole Shrinkage TOE PUFFS & STIFFENERS Elongation at break Change in area Bond ability ADHESIVES Peel strength Heat resistance Shear strength Viscosity

250 600 100 700 2000 700 900 600 600 600 600 600 700 900 600 1200 600 400 1000 3000 1000 6000 2000 400 1000

600 700 600 500 400 200 700 600 600 600 600 700 600 600

600 600 600

900 600 600 600

SATRA
Accredited Laboratory

SATRA
TECHNOLOGY CENTRE

a member of

7 7.1 7.2 7.3 7.4 8 8.1 8.2 8.3 9 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 10 10.1 10.2 10.3 10.4 10.5 11 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 11.10 11.11 11.12 11.13 11.14 11.15 11.16 11.17 a b 12 12.1 12.2 12.3 12.4

HEELS Heel pin holding strength Resistance to Splitting strength of top piece attachment of heel Heel pull off Sole Leather Dynamic Water Penetration Grain Crack Index Sole Leather Abrasion THREADS Breaking Load and extension at break Twist per unit length Tenacity Tex Colour fastness Composition Balance of twist Thread abrasion TAPES & BINDINGS Bond ability (self adhesive tapes) Elasticity (Elastic tapes) Colour migration Breaking strength Endurance test on elastic tapes FASTENERS Resistance to repeated opening & closing Lateral strength of slide fasteners Strength of slide fastener pullers Attachment of slide fastener Top stops Attachment of slide fastener Bottom stops Slider locking strength of slide fasteners Security of attachment of retainer to lateral load Security of attachment of retainer to long. Load Tensile / Breaking strength Tear strength Peel strength before & After wearing (Velcro) Shear strength before & After wearing (Velcro) Corrosion (metal fasteners) Eyelet attachment strength Strength of fastened buckles Strength of buckle and strap attachment Corrosion resistance For the first sample For subsequent three samples (per sample) LACES Linear Density Breaking strength & elongation at break Strength of bodkin attachment Abrasion resistance 600 350 600 1000

600 700 1000

600 300 250 250 200 600 150 600

600 600 200 600 800

600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 1000 200

100 600 600 600

SATRA
Accredited Laboratory

SATRA
TECHNOLOGY CENTRE

a member of

12.5 12.5 12.6 13 13.1 13.2 13.3 13.4 13.5 13.6 a b 13.7 13.8 14 14.1 14.2 14.3 14.4 14.5 15 15.1 15.2 15.3 15.4 15.5 15.6 15.7 16 16.1 16.2 16.3 16.4 16.5 16.6 16.7 16.8 16.9 16.10 16.11 16.12 16.13 16.14 16.15 16.16 16.17 16.18 16.19 16.20 16.21

Knot resistance Knot resistance Colour migration SAFETY FOOTWEAR Hardness of steel toe cap Nail penetration test Dimensions of steel toe cap Impact strength of steel toe caps Thermal conductivity Static electricity Without conditioning With conditioning as per EN norms Resistance to hot contact Compression resistance CARD BOARD BOXES Specific weight Tongue tear strength Rub fastness Dry/wet Laminar strength Burst strength HAWAI CHAPPAL Strap attachment strength Breaking strength of strap Ross flexing Abrasion Split tear Compression set Shrinkage TEXTILES Breaking strength Colour fastness to washing Colour fastness to perspiration(Acidic/Alkaline each) Composition Linear Density of yarn/ count Scouring Loss Colour fastness to light Identification of fibre Dimensional stability Threads per unit length in woven fabric Weight per square meter Crease Recovery Dry Cleaning Ash Test pH Water Soluble Cone Test Water Absorption Hot Pressing Bleaching Test Crocking Test

600 600 200

250 600 400 600 500 500 2000 500 600

100 600 400 700 600

400 400 600 700 600 600 600

400 150 150 300 100 500 1200 200 100 150 90 550 550 200 300 300 200 200 450 250 200

SATRA
Accredited Laboratory

SATRA
TECHNOLOGY CENTRE

a member of

17 17.1 a b 17.2 a b 17.3 a b 17.4 a b 17.5 a b 17.6 a b 18 18.1 a b 18.2 a b 18.3 a b 18.4 a b 18.5 a b 19 19.1

AGEING TESTS (HEAT AGEING / WET HEAT AGEING(HYDROLYSIS) Up to 24 hours(I day) For the first sample For subsequent three samples (per sample) Up to 72 hours(3 days) For the first sample For subsequent three samples (per sample) Up to 120 hours(5 days) For the first sample For subsequent three samples (per sample) Up to 168 hours(7 days) For the first sample For subsequent three samples (per sample) Up to 240 hours( 10 days) For the first sample For subsequent three samples (per sample) Up to 336 hours( 14 days) For the first sample For subsequent three samples (per sample) COLD TESTS Up to 24 hours(I day) For the first sample For subsequent three samples (per sample) Up to 72 hours(3 days) For the first sample For subsequent three samples (per sample) Up to 120 hours(5 days) For the first sample For subsequent three samples (per sample) Up to 168 hours(7 days) For the first sample For subsequent three samples (per sample) Up to 240 hours( 10 days) For the first sample For subsequent three samples (per sample) WEATHEROMETER TESTS Rs. 45/ hour if only one sample is submitted Rs. 40/ hour if two samples are submitted for tests under same conditions Rs.30/hour if three samples are submitted for tests under same test conditions

600 100

1000 200

1200 250

1500 300

2000 400

3000 500

2000 500

6000 1000

8,000 1000

10,000 1000

16,000 1500

* Note

SATRA
Accredited Laboratory

SATRA
TECHNOLOGY CENTRE

a member of

FDDI INTERNATIONAL TESTING CENTRE, CHENNAI CHEMICAL LABORATORY PRICE LIST

S. No. 1 2 Test Description Azo Dyes PCP + TeCP + TCP Any two of above Any one of above Cr-6 Formaldehyde .pH Moisture Content Solvent Extractable Matter Cr2O3 content Ash Content Plasticizer content Water Soluble Matter Heavy Metals Any one metal Lead content Free fatty acid content Nickel Free Cr-6 after ageing Bielstin test PCB BHT qualitative BHT quantitative TBT+DBT+MBT Any two Any one Disperse dyes allerg Test Method DIN/EN 14362-1,& 2,Dec 2003 ISO/TS 17234:2003 -do-do-doBS/EN/ ISO 17075 : 2007 ISO/TS/17226 : 2003 IS 582 -do-do-do-doSATRA CM 45 IS 582 DIN/EN/ISO 105E04:Aug 1996 EN 1122 : 2002 IS:12254 SATRA TM 346 DIN EN 12471 BS/EN/ ISO 17075:2007 In houseSolvent Extraction/GCMS/ GCECD Solvent Extraction/GCMS ISO 17353:2004 Charge / sample(Rs.) 2900 5000 3000 1800 1000 1000 350 350 1000 1000 350 1200 500 3450 1000 800 500 1800 1600 500 5000 3800 5500 7500 6000 4000 4500

3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

22

DIN 54231:2005

SATRA
Accredited Laboratory

SATRA
TECHNOLOGY CENTRE

a member of

S. No. 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Test Description Disperse dyes carcin Dioxins Furans Pesticides Solvent Analysis by GCMS/ HS Phthalates Chlorinated Organic Carriers N-Nitroamines Odour Test Chloro alkanes Dimethyl Formamide Blue colorants navy Polyaromatic hydrocarbons Vinyl Chloride Monomer Volatile Organic Compounds (VOC) 2 to 5 Single PFOA, PFOS, PFOSA Single AP and its APEO AP or APEO NPEO or OPEO Flame Retardants SCCP, C10-C13 Dimethyl Fumerate TCMTB (2-Thio Cyanato Methyl Thio-1,3-Benzothiazole)

Test Method -doSolvent Extraction/GCMS/ GCECD -doSolvent Extraction/GCMS GCMS/HS Solvent Extraction/GCMS -doBS EN 12868 SNV 195651 Solvent Extraction/GCMS -doSolvent Extraction/GCMS/ LCMS -doGCMS / HS -do-

Charge / sample(Rs.) 4500 6800 6800 5600 4000 4000 5200 6300 1400 6500 2600 9000 5000 2600 3200 2000

38

Solvent Extraction / LCMS

12500 7800 15000 7800 10000 9000 6500 5000 5000

39

Solvent Extraction/LCMS

40 41 42 43

Solvent Extraction/LCMS / GCMS Solvent Extraction/GCECD/ MS Solvent Extraction/GCMS Solvent Extraction/GCMS

* * Note

SATRA
Accredited Laboratory

SATRA
TECHNOLOGY CENTRE

a member of

* Note
(i) (ii) (iii) Urgent request (Express Delivery) will be taken on priority and incur a surcharge of 50 %. Service tax extra @ 10.30 % The above rate is based on the normal condition and duration of testing process. Additional charges may be charged according to the required process and duration of testing if applicable.

* * Note
(iv) (v) (vi) Delivery: min 5 working days ( min 10 working days for interlab tests, i.e. from S. No.19 to 43). Reports of big orders may take longer time. Urgent request (Express Delivery) will be taken on priority and incur a surcharge of 50 %. Service tax extra @ 10.30 % Express delivery is not available for interlab tests Sample quantity to be submitted: Leather- 1 skin, fabric 1 m, shoe 2 odds, others 100gms

Contact Person: Dr. Kausik Ghosh

PhD, Post-Doc ( DWI, RWTH, GERMANY)ACS Member (Chief-Technologist) FDDI INTERNATIONAL TESTING CENTRE,CHENNAI FOOTWEAR DESIGN & DEVELOPMENT INSTITUTE Ministry of Commerce & Industry, Government of India Plot No: PB 13, Footwear Component Park, 7th Main Road, Sipcot Industrial Park, Irungattukottai, Sriperumbudur -602105

Mobile : 91-9940331368 Land line: 044-27156884 / 27156885 Fax : 044- 27156886

Email: [email protected] [email protected] Web: www.fddiindia.com