Scribd
Upload
204 views5 pages

205-03 Front Drive Axle and Differential - General Procedures - Differential Draining and Filling

Uploaded by

CARLOS LIMADA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
204 views5 pages

205-03 Front Drive Axle and Differential - General Procedures - Differential Draining and Filling

Uploaded by

CARLOS LIMADA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Page 1 of 5

205-03 Front Drive Axle/Differential 2019 Ranger
General Procedures Procedure revision date: 11/29/2018 

Differential Draining and Filling

Materials

Name Specification
Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant WSP-M2C197-A
XY-80W90-QL
Draining

1. With the vehicle in NEUTRAL, position it on a hoist.


Refer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation).

2. Remove and discard the front differential fill plug.

3. WARNING: Be prepared to collect escaping fluids.

Remove and discard the front differential drain plug and allow the differential fluid to drain.

http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN... 1/21/2019
Page 2 of 5

4. NOTE: Make sure that a new component is installed.

NOTE: The drain plug is magnetic. Make sure that the correct component is installed.

Install the front differential drain plug.


Torque: 21 lb.ft (28 Nm)

http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN... 1/21/2019
Page 3 of 5

5. Fill the differential with 0.775 L (1.64 pts) of clean differential gear lubricant.

Filling

1. Check the fluid level and top up if required with clean differential gear lubricant. The differential fluid level
should be to the bottom of the filler hole.
Refer to: Specifications (205-03 Front Drive Axle/Differential, Specifications).
Material: Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant / XY-80W90-QL (WSP-M2C197-A)

http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN... 1/21/2019
Page 4 of 5

2. NOTE: Make sure that a new component is installed.

Install the front differential fill plug.


Torque: 21 lb.ft (28 Nm)

Copyright © 2019 Ford Motor Company

http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN... 1/21/2019
Page 5 of 5

http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN... 1/21/2019

You might also like