C-25 S-300

Km Ks
19.00 3.95
20.00 3.96
21.00 3.96
22.00 3.97
23.00 3.98
24.00 3.98
25.00 3.99
26.00 4.00
27.00 4.02
28.00 4.03
29.00 4.04
30.00 4.05
31.00 4.06
32.00 4.07
33.00 4.08
34.00 4.09
35.00 4.10
36.00 4.11
37.00 4.12
38.00 4.15
39.00 4.17
40.00 4.18
41.00 4.20
42.00 4.21
43.00 4.24
44.00 4.26
45.00 4.29
46.00 4.31
47.00 4.34
48.00 4.36
49.00 4.39
50.00 4.41
51.00 4.46
52.00 4.49
53.00 4.51
54.00 4.56
55.00 4.62
56.00 4.65
57.00 4.67
58.00 4.73
 DESIGN OF SLAB MAT FOUNDATION WITH FOUR COLUMNS

P1= 1798.00 KN
P2= 2475.00 KN
P3= 1472.00 KN
P4= 2127.00 KN
LX1= 0.25 m
LX2= 4.00 m
LX3= 1.25 m
LY1= 0.72 m
LY2= 4.40 m
LY3= 0.25 m
sall= 300.00 KN/m2

Column dimensions
BC1= 0.50 m
DC1= 0.50 m
BC2= 0.50 m COLUMN POSITION WITH RESPECT TO THE MAT FOOTING
DC2= 0.50 m P1
BC3= 0.50 m 1FC 1FC 2FC 0FC
DC3= 0.50 m 1 0 0 0
BC4= 0.50 m
DC4= 0.50 m P2
1FC 1FC 2FC 0FC
Preliminary Estimate of Area 0 0 0 1
Aav= LX2*LY2
Aav= 17.6 m2 P3
Arequired= SP/sall= 26.24 m2 1FC 1FC 2FC 0FC
0 0 1 0
Geometric centerline Area can be increased within limitation.
P4
Take LX= 5.50 m 1FC 1FC 2FC 0FC
LY= 5.37 m 0 1 0 0
Aassumed= 29.535 m2
sapp= 266.531234129 NOTE:
Xbar= 2.75 1FC ONE FACE OF COLUMN AT EDGE OF FOOTING
Ybar= 2.69 2FC TWO FACES OF COLUMN AT EDG OF FOOTING
0FC NO FACE OF COLUMN AT EDGE OF FOOTING
CALCULATION OF SP, ex & ey

SP= 7872.00 KN
(Moment about Y1) MY1= 15835.60 KN-m
Y= 2.01 m
(Moment about X1) MX1= 18408.00 KN-m
X= 2.34 m

Eccentricity about the geometric center of the slab

ey= 0.05 m
ex = -0.16 m

CALCULATION OF CONTACT PRESSURE

s=SP(1/A+-ey*y/Ix+-ex*x/Iy)
s=SP/A+-Mx*Y/Ix+-My*X/Iy)

Ixx= 70.97 m4
Iyy= 74.45 m4

Mx= SP*ey= Mx= 367.12

My= SP*ex= My= 1272.00

Mx/Ixx= 5.17

My/Iyy= 17.08

Point SP/A= Mx*Y/Ixx= My*X/Iyy= s=

Y1X1 266.53 -10.16 -42.71 213.66
Y2X1 266.53 12.60 -42.71 236.41
Y1X2 266.53 -10.16 25.63 281.99
Y2X2 266.53 12.60 25.63 304.75 CHECK WITH VISUAL INSPECTION VALUES OF STRESS
Y2'X1' 266.53 13.89 -46.98 233.44 WITH THE ALLOWABLE & IF THERE IS BIG DIFFERENCE
Y2'X2' 266.53 13.89 46.98 327.40 PLAY WITH THE VALUES OF LX1, LX3, LY1 & LY3.
Y1'X1' 266.53 -13.89 -46.98 205.66
Y1'X2' 266.53 -13.89 46.98 299.63
FOOTING DEPTH DETERMINATION
use concrete strength 20 Mpa
Fcd= 11.333
Fctd= 1.043
rmin= 0.00200
Steel S-300
Vpresit= 0.25*fctd*k1*k2*U*d U= (3d+bc)*4 k1= 1.1 k2= 1.6-d
Vpacting= P - sapp*(3*d+bc)^2
taking concrete cover to be = 30 mm

PUNCHING SHEAR
First column
Vpresit= Vpacting Use the "tools-Goal seek" command in one of the three cells
P1= 1798.00 with non-zero value and feed the value in "B90" to obtain
d= 0.61683 this result. The value in "B91" should be used as a variable to
change in order to achieve this result.
P= 1798
P= 0
P= 0
Second column
Vpresit= Vpacting Use the "tools-Goal seek" command in one of the three
P2= 2475.00 cells with non-zero value and feed the value in "B97" to
obtain this result. The value in "B98" should be used as a
d= 0.522441 variable to change in order to achieve this result.
P= 0
P= 0
P= 2475
Third column
Vpresit= Vpacting Use the "tools-Goal seek" command in one of the three cells
P3= 1472.00 with non-zero value and feed the value in "B104" to obtain this
result. The value in "B105" should be used as a variable to
d= 0.840822 change in order to achieve this result.
P= 0
P= 1472
P= 0
Forth column
Vpresit= Vpacting Use the "tools-Goal seek" command in one of the three
P4= 2127.00 cells with non-zero value and feed the value in "B111" to
obtain this result. The value in "B112" should be used as a
d= 0.70607
variable to change in order to achieve this result.
P= 2127
P= 0
P= 0

d= 0.84 0.84 m

LX= 5.50 m
LY= 5.37 m
d= 0.84 m
D= 0.88 0.89 m

COMPUTATION OF MOMENT

EQUIVALENT BEAMS

X-DIRECTION
X1Y1-X2Y1 s= 250.23

X1Y2-X2Y2 s= 275.50
Top Reinforcement
MMAX= 1/10*(s*LX2^2)
MMAX= 440.80

Bottom Reinforcement
MMAX= s*MAX(LX1,LX3)
MMAX= 344.38

Y-DIRECTION
Y1X1-Y2X1 s= 222.29

Y1X2-Y2X2 s= 303.44
Top Reinforcement
MMAX= 1/10*(s*LY2^2)
MMAX= 587.47

Bottom Reinforcement
MMAX= s*MAX(LY1,LY3)
MMAX= 218.48
REINFORCEMENT CALCULATION
A) X-DIRECTION

MTOP= 440.80 KNm Km=(Sqrt(M/b))/d= 24.9700 =>Ks= 3.98

MBOT= 344.38 KNm Km=(Sqrt(M/b))/d= 22.0706 =>Ks= 3.97

1681.64 mm
2
As-min=rmin*b*d= 24 20 16 14
As-top=Ks*M/d= 2088.27 mm2 use 216.63 150.44 96.28 73.72
As-bot=Ks*M/d = 1681.64 mm2 use 269.02 186.82 119.56 91.54

B) Y-DIRECTION

MTOP= 587.47 KNm Km=(Sqrt(M/b))/d= 28.8262 =>Ks= 4.03

MBOT= 218.48 KNm Km=(Sqrt(M/b))/d= 17.5793 =>Ks= 3.95

1681.64 mm
2
As-min=rmin*b*d= 24 20 16 14
As-top=Ks*M/d= 2813.94 mm2 use 160.77 111.64 71.45 54.71
As-bot=Ks*M/d = 1681.64 mm2 use 269.02 186.82 119.56 91.54