Scribd
Upload
128 views2 pages

Temperature Sensor NTC M12: Application Mechanical Data

This sensor measures fluid temperatures and has a negative temperature coefficient, meaning its conductivity rises with increasing temperature. It has a robust and compact design, and can be connected directly to control units using a pull-up resistor. Its main benefits are its high quality, robust design, and availability with various connector options.

Uploaded by

heinz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
128 views2 pages

Temperature Sensor NTC M12: Application Mechanical Data

This sensor measures fluid temperatures and has a negative temperature coefficient, meaning its conductivity rises with increasing temperature. It has a robust and compact design, and can be connected directly to control units using a pull-up resistor. Its main benefits are its high quality, robust design, and availability with various connector options.

Uploaded by

heinz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Temperature Sensor NTC M12

This sensor is designed to measure the


fluid temperatures of oil, water, fuel e.g.
For example, this signal is used as a
control value for engine control units or as
a measurement value which is logged in a
data acquisition system.

The NTC-resistor has a negative


temperature coefficient. This means, that
with increasing temperature the
conductivity rises. The conductive element
of the temperature sensor is made of
semiconducting heavy metal oxide and
oxidized mixed crystals, which are
equipped with a protective housing.

The main benefit of the sensor is the


combination of both high quality
production part and a robust, compact
design. Furthermore the sensor is
available with a series or military spec
connector.

Application Mechanical Data


Application -40 … 130 °C Male Thread M12x1,5
Storage Temp. Range 0 … 100 °C Wrench Size 19 mm
Max. Vibration 600 m/s2 Installation Torque 25 Nm
Weight w/o Cable 28,9 g

Electrical Data Characteristic


Characteristic NTC Accuracy @ 25 °C ± 1,4 °C
Nominal Resistance @ 20 °C 2,5 kOhm ± 5 % Accuracy @ 100 °C ± 3,4 °C
Response Time Շ 63 in still water < 15 s

10 Mar. 08 [email protected] 1/2


Characteristic Application
T [°C] R [Ohm]
-40 45.313
100.000
-30 26.114
10.000

Resistance [Ohm]
-20 15.462
-10 9.397 1.000

0 5.896 100

10 3.792 10
20 2.500
1
30 1.707 -50 -25 0 25 50 75 100 125 150
40 1.175 Temperature [°C]

50 834
60 596
70 436
80 323
90 243
100 187
110 144
120 113
130 89

Connectors and Cables Application Hint


Connector Bosch Jetronic The NTC M12 can be connected directly to most
Connector Loom D 261 205 289 control units using a pull-up resistor
(typically 1 or 3 kOhm).
Pin 1 SIG+
Each mounting orientation is possible.
Pin 2 SIG-
Please find further application hints in the offer
Pin 3 - drawing (http://www.bosch-motorsport.com).
Pin 4 - Free download of the sensor configuration file
Pin 5 - (*.sdf) for the Bosch Data Logging System
Various military and automotive connectors on (http://www.bosch-motorsport.com).
request.
Part Number
NTC M12 0 280 130 026

10 Mar. 08 [email protected] 2/2

You might also like