Scribd
Upload
153 views

Manual Pa2120mkii

Usermanual of the APart professional 100W stereo Amplifier

Uploaded by

Jef
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
153 views

Manual Pa2120mkii

Usermanual of the APart professional 100W stereo Amplifier

Uploaded by

Jef
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 4
PA-2120 MK II PROFESSIONAL STEREO POWER-AMPLIFIER OWNER’S MANUAL Precautions WARNINGS 1. All operating instructions should be read before using this equipment. 2. To reduce risk of electric shock, do not remove cover or back. There are no user serviceable parts inside, Refer servicing to a qualified service technician, 3. Do not expose this unit to direct sunlight or a heat source such as a radiator, stove or other heat producing appliance. 4, This unit should be cleaned with a damp cloth only. Avoid solvents or other cleaning detergents. When moving this eaupment, i shouldbe. placed init orignal carton and packing or a sutable oad case. This wil reduce the risk of damage in transit It 'Hum’ or ‘Buzz’ occurs when connecting different inputs, then this Is often caused by ‘ground or earth loops’. Inside, you can disconnect JP8(CH1) and JP7 (CH2) to break this ground loop. Please contact a qualified technician. Low cut = high pass fiter Inside the amplifer, a 100 Hz high pass filter can be activated per channel! by removing the jumpers J29 for channel 1, and J2 for channel 2. Prease contact a qualified technician 100Hz is used when you connect small speakers which are not able to reproduce low frequencies. Cooing’protection systems This power ampifier 's designed for dynamic high quality sound reproduction. Due to its law impedance x 180W MAX 4 Ohm 2x 120W> 160W MAX 8 Ohm 2x 120Wx 120W MAX Input Sensitivity 24/8 Ohm = 0.775Vrms Frequency Response 15 He 30KHz Total harmonic distortion «0.03% Damping Factor (4 Ohms) >400 Slew Rate > ‘Ov/us Input RCA-balance Impedance 20KQ, 0 dB Speaker Output Binding post terminals Protections Short Circut & Overioad Temperature Power Consumption Watts SOOVA Max. Fuse : 3.154 Siow Dimensions (W*H'D) 481x 44% 300mm Weight Net : 4.5kgs Due to the bui-in jimter, some values may differ from the specs listed above. Due to continuous research and developments, the product specifications may change without prior notice at any time.

You might also like