Scribd
Upload
1K views

Jagriti Steel Pvt. LTD.: Test Cerctificate For Hot Rolled Medium & High Tensile Structural Steel

The test certificate summarizes the results of testing hot rolled medium and high tensile structural steel samples for a customer. It provides the chemical composition and mechanical properties test results for 5 steel sections, including the carbon, manganese, sulfur, phosphorus, and silicon content as well as the yield stress, ultimate tensile strength, elongation and bend test results. All samples met the requirements for grade E-250A structural steel according to IS 2062-2011.

Uploaded by

Hema Nandh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Jagriti Steel Pvt. LTD.: Test Cerctificate For Hot Rolled Medium & High Tensile Structural Steel

The test certificate summarizes the results of testing hot rolled medium and high tensile structural steel samples for a customer. It provides the chemical composition and mechanical properties test results for 5 steel sections, including the carbon, manganese, sulfur, phosphorus, and silicon content as well as the yield stress, ultimate tensile strength, elongation and bend test results. All samples met the requirements for grade E-250A structural steel according to IS 2062-2011.

Uploaded by

Hema Nandh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

JAGRITI STEEL PVT. LTD.

Sy.No. 563 & 566, Veerlapally (V), Kothur (M), Ranga reddy (D) - 509228, TELANAGANA
CM/L-6300054294

TEST CERCTIFICATE FOR HOT ROLLED MEDIUM & HIGH TENSILE STRUCTURAL STEEL
Test Certificate No.: JPL/20-21/1102
Consignee: M/s Ramesh Krishna Engineering Works 19/11/2021

We certify that material described below fully confirms to IS:2062-2011 Chemical composition and mechenical properties of the products as tested in accordancewith the
scheme of testing and Inspection contained in the BIS certification mark Licence No. CM/L-6300054294 are as indicated below along each order No.
(Please refer to IS 2062-2011 for details of specfication requirments)
TEST RESULT
CHEMICAL COMPOSITION MECHANICAL PROPERTIES
Section Size Lot Quantity Yield Ultimate Impect
Micro Grade Remarks
(mm) No. (MT) Tensile Elong Bend Test
C% Mn% S% P% Si% Alloys CE% Stress Strength (%) Test
Element (Mpa) (Mpa)
A-50X50X5 76 4.200 0.18 0.59 0.036 0.042 0.20 0.28 285.6 499.7 30.2 OK E-250A
A-50X50X6 210 3.200 0.20 0.58 0.036 0.043 0.23 0.30 295.6 510.7 29.6 OK E-250A
A-65X65X6 522 3.600 0.22 0.60 0.039 0.044 0.21 0.32 290.4 510.7 30.5 OK E-250A
A-75X75X8 523 2.500 0.22 0.60 0.036 0.044 0.19 0.31 290.5 499.8 30.5 OK E-250A
A-75X75X10 525 4.300 0.20 0.60 0.036 0.043 0.21 0.30 290.5 488.7 29.6 OK E-250A

Micro Alloying element present should be indicated For


The material supplied confirms to the specified domentions and tolerances

INVOICE NO & DATE: 2568 19/11/2021

You might also like