0% found this document useful (0 votes)
272 views7 pages

Puolop-Dw01a C351410

The DW01A battery protection IC protects one-cell lithium-ion batteries from overcharge, overdischarge, and overcurrent. It features a small SOT-23-6 package, low quiescent current of 3uA, precision overcharge protection of 4.3V +/- 50mV, and overcurrent protection with two detection levels. The IC prevents battery damage without external components by controlling charge and discharge MOSFETs.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
272 views7 pages

Puolop-Dw01a C351410

The DW01A battery protection IC protects one-cell lithium-ion batteries from overcharge, overdischarge, and overcurrent. It features a small SOT-23-6 package, low quiescent current of 3uA, precision overcharge protection of 4.3V +/- 50mV, and overcurrent protection with two detection levels. The IC prevents battery damage without external components by controlling charge and discharge MOSFETs.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

DW01A

General Description Ordering Information


The DW01A battery protection IC is designed to DW01A
protect lithium-ion/polymer battery from damage or PACKAGE TYPE
degrading the lifetime due to overcharge, SOT-23-6
overdischarge, and/or overcurrent for one-cell
lithium-ion/polymer battery powered systems, such as TEMPERATURE RANGE
cellular phones. -40°C~+85°C

The ultra-small package and less required external OVERCHARGE PROTECTION


components make it ideal to integrate the DW01A 4.3V± 50mV
into the limited space of battery pack. The accurate
±50mV overcharging detection voltage ensures safe
and full utilization charging. The very low standby
current drains little current from the cell while in
storage.

Features Applications
Reduction in Board Size due to Miniature Protection IC for One-Cell Lithium-Ion /
Package SOT-23-6. Lithium-Polymer Battery Pack
Ultra-Low Quiescent Current at 3μA
(Vcc=3.6V).
Overdischarge Current at 4 μA
(Vcc=1.8 V).
Precision Overcharge Protection Voltage
4.3V ± 50mV
Two Detection Levels for Overcurrent
Protection.
Delay times are generated by internal circuits.
No external capacitors required.

Rev B - 1- 2016-4-12
DW01A
Product Name List

Overcharge Overcharge Overdischarge Overdischarge Overcurrent 0V Stand by


detection release detection release detection battery function
Product Package
voltage voltage voltage voltage voltage charge release
[VOCP] (V) [VOCR] (V) [VODP] (V) [VODR] (V) [VOI1] (mV) function

Auto
DW01A SOT-23-6 4.300±0.050 4.100±0.050 2.50±0.1 2.90 ±0.1 150±20 available Recovery

Pin Configuration

Pin No. Symbol Description 6 5 4

1 OD MOSFET gate connection pin for discharge control SOT-23-6


TOP VIEW
2 VM Input pin for current sense, charger detect

3 OC MOSFET gate connection pin for charge control 1 2 3

4 TD Test pin for reduce delay time

5 VCC Power supply, through a resistor (R1)

6 GND Ground pin

Functional Block Diagram


TD

VCC

Short circuit
Detector
VSS VSS

Oscillator
Control
Overcharge Circuit
Detector
Over current
Detector
VSS
Divider
VM
Overdischarg Control
e Detector Logic

GND Charger
Detector
VSS
VSS Control
Logic
OD

OC

Rev B - 1 -2 2016-4-12
DW01A

Typical Application Circuit


BATT+
R1
100Ω
VCC

C1
0.1μF DW01A

GND
VM
TD
OD

OC
R2
1kΩ

M1 M2
BATT-

Absolute Maximum Ratings


(VSS=0V, Ta=25°C unless otherwise specified)

Item Symbol Rating Unit

Input voltage between VDD and VSS VDD 0.3 to 10 V


OC output pin voltage VOC VDD-24 to VDD+0.3 V
OD output pin voltage VOD VSS-0.3 to VDD+0.3 V
CS input pin voltage VCS VDD-24 to VDD+0.3 V
Operating Temperature Range TOP -40 to +85 °C
Storage Temperature Range TST -40 to +125 °C

Rev B - 3- 2016-4-12
DW01A

Electrical Characteristics
(Ta=25°C unless otherwise specified)

PARAMETER TEST CONDITIONS SYMBOL Min Typ Max UNIT

Supply Current VCC=3.6V ICC 3.0 6.0 μA

Power-Down Current VCC=1.8V IPD 4 μA

0V Battery Charge Starting Charger


V0CHA 1.2 V
Voltage
Overcharge Protection Voltage VOC 4.25 4.30 4.35 V

Overcharge Release Voltage VOCR 4.05 4.10 4.15 V

Overdischarge Protection Voltage VOD 2.40 2.50 2.60 V

Overdischarge Release Voltage VODR 2.80 2.90 3.00 V

Overcurrent Protection Voltage VEDI 130 150 170 mV

Short Current Protection Voltage Vshort 0.82 1.36 1.75 V

Overcharge Delay Time TOC 110 200 ms

Overdischarge Delay Time VCC=3.6V to 2.4V TOD 55 200 ms

Overcurrent Delay Time (1) T EDI 7 20 ms

Overcurrent Delay Time (2) T short 400 600 μs

VCC=3.9V
OD Pin Output “H” Voltage ICO =10uA DoutH VCC-0.4 VCC-0.2 V

OD Pin Output “L” Voltage VCC=2V DoutL 0. 2 0.5 V


IDO =10uA

OC Pin Output “H” Voltage VCC=3.9V CoutH VCC-0.1 VCC-0 02 V


ICO =10uA

Rev B - 4- 2016-4-12
DW01A
Timing Diagram
1. Overcharge Condition Load Discharging Normal Condition

Charger

Load

VOC
Battery Voltage

VOCR

VODR

VOD

VCC
OC Pin

VM

VCC
OD Pin

GND

VCC
VM Pin

VEDI
GND
VOCH

TOC TOC

Rev B - 5- 2016-4-12
DW01A
2. Overdischarge Condition Charging by a Charger Normal Condition

Charger

Load

VOC
Battery Voltage

VOCR

VODR

VOD

VCC
OC Pin

VM

VCC
OD Pin

GND

VCC
Vshort
VM Pin

GND
VOCH

TOD TOD

Rev B - 6- 2016-4-12
DW01A
3. Over Current Condition Normal Condition

Charger

Load

VOC
Battery Voltage

VOCR

VODR

VOD

VCC
OC Pin

VM

VCC
OD Pin

GND

VCC
Vshort
VM Pin

VEDI
GND

T EDI T short

Rev B - 7- 2016-4-12

You might also like