HD170 Cargo Short Wheelbase
HYUNDAI HD Series
Vehicle Type Cargo
Cab Type Sleeper Cab
Wheel Base Short
Drive System LHD, 4 X 2
Application Engines D6AV D6AB-d D6GA2E
Dimensions (mm)
Wheel Base 4,395
Length 7,850
Overall (Chassis Cab) Width 2,495
Height 3,140
Front 2,040
Wheel Tread
Rear 1,850
Front 1,495
Overhang (Chassis Cab)
Rear (Frame) 1,865
C.A (Cab to rear Axle) 3,560
C.E (Cab to end of frame) 5,425
Min. Ground Clearance 285
Min. Turning Radius m 7.5
Weight (kg)
Chassis Cab Weight 6,200 6,330 6,015
Front 3,850 3,960 3,760
Rear 2,350 2,370 2,255
** Max Gross Vehicle Weight 18,800
Front 7,000
Rear 11,800
** Max. GVW includes the front &「ear axle loads based on the permissible tire load.
Hyundai Commercial Vehicle SPECIFICATIONS_ 48
HD170 Cargo Long Wheelbase
HYUNDAI HD Series
Vehicle Type Cargo
Cab Type Sleeper Cab
Wheel Base Long
Drive System LHD, 4 X 2
Application Engines D6AV D6AB-d D6GA2E D6GA28
Dimensions (mm)
Wheel Base 5,850
Length 9,525
Overall (Chassis Cab) Width 2,495
Height 3,140
Front 2,040
Wheel Tread
Rear 1,850
Front 1,495
Overhang (Chassis Cab)
Rear (Frame) 2,090
C.A (Cab to rear Axle) 5,015
C.E (Cab to end of frame) 7,105
Min. Ground Clearance 285
Min. Turning Radius m 10.1
Weight (kg)
Chassis Cab Weight 6,310 6,440 6,125 6,145
Front 3,920 4,030 3,865 3,885
Rear 2,390 2,410 2,260 2,260
** Max Gross Vehicle Weight 18,800
Front 7,000
Rear 11,800
** Max. GVW includes the front & rear axle loads based on the permissible tire load.
49 _Hyundai Commercial Vehicle SPECIFICATIONS
HYUNDAI HD Series_HD170 Cargo
Chassis Specifications
Engine
HD170
Model
D6AV D6AB-D D6GA2E D6GA28
Natural Aspiration Turbo Charger Intercooler
Type
4 stroke-cycle, water-cooled, direct-injection diesel engine
number of Cylinder 6 in-line
Piston Displacement (cc) 11,149 5,899
Bore x Stmke (mm) 130 x 140 103 x 118
Compression Ratio 17.5 ： 1 17.0 ： 1 17.0 ： 1
Eurol 220 / 2,200 - - -
Euroll/ III - 290 / 2,000 - -
Max. Power** (ps/rpm)
Euro IV - - 255 / 2,500 -
Euro V - - - 280 / 2,500
Eurol 75 / 1,400 - - -
Euroll / III - 110 / 1,200 - -
Max. Torque ** (kg.m/rpm)
Euro IV - - 95 / 1,400 -
Euro V - - - 100 / 1,400
General Pressure type with thermostat, Forced circulation by centrifugal water pump
Cooling System
Radiator Corrugated fin type with pressure cap and condenser tank
Battery 12V x 2, 150 AH at 20 Hr rates
Electrical System Alternator 24V-60A 24V-70A
Starter 24V-5.5kW 24V-5kW
Injection pump in-line type
Fuel System Governor Min-Max Speed (RFD) All Speed Type (RLD-J) -
Fuel filter Spin-on type
Lubrication Forced lubrication by gear pump
Oil filter Combination (Full flow and bypass) filter with paper element
Oil System
Oil cooler Water cooled, plate fin type
Oil grade API service classification CF-4 or above
Air cleaner Cyclonic dry paper element
Valve System Single Overhead Valve, Two valves per cylinder
** Max. Power and Torque of engine may vary according to each country.
Clutch
Engine D6AV D6AB-D D6GA2E D6GA28
Type Hydraulic control with Air pressure assistance, Coil spring, Single dry plate, Pre-Damper
Facing Material Non-Asbestos
Facing Size (mm) Outside dia x
ø410 x ø250 ø430 x ø250
Inside dia
Hyundai Commercial Vehicle SPECIFICATIONS_ 50
HYUNDAI HD Series_HD170 Cargo
Transmission
Engine D6AV D6AB-D D6GA2E D6GA28
Model M8S5 (Over Drive) M10S6 (Over Drive)
5 forward and 1 reverse
speed, 2nd to 5th
6 forward and 1 reverse speed, 2nd to 6th synchromesh, 1st & reverse constant-
Type synchromesh, 1st &
mesh gears
reverse constant-mesh
gears
1st 5,431 6.552
2nd 3,436 4.178
3rd 1,747 2.415
Gear Ratio 4th 1.000 1.621
5th 0.741 1.000
6th - 0.758
Reverse 5.677 6.849
Gear Oil API service classification GL-5 and SAE service classification 80W/90 (85W/140 ;Tropical zones only)
T.G.S. (Transmission Gear Shift) Floor shift, Mechanical remote control
Rear Axle
Type Full floating type
Capacity kg 11,800
Type Single Reduction, Hypoid gear
Final Reduction Gear
G/Ratio 6.166 4.333 4.889
Front Axle
Type Reverse Elliot type “ I ” beam
Capacity kg 7,000
Tire & Wheel
Type
Tire Front / Rear 12R 22.5 - 16PR
Wheel Front / Rear 8.25T x 22.5-165
Steering
Type 2-Spoke, Ball-nut type, Tilt & Telescopic steering column
Tilting Angle 9°
Inner 49°
Turning Angle
Outer 39°
Service Brake
Actuation Full Air, Dual circuit fixed S cam with spring loaded chambers
Front Drum dia. x Lining width x Lining thickness ： ø410 x 156 x 19
Size (mm)
Rear Drum dia. x Lining width x Lining thickness ： ø410 x 220 x 19
Total lining area 6,08㎠
51 _Hyundai Commercial Vehicle SPECIFICATIONS
HYUNDAI HD Series_HD170 Cargo
Parking Brake
Engine D6AV D6AB-D D6GA2E D6GA28
Actuation Spring loaded type chamber on the rear wheels
Size (mm) Drum diameter x Lining width x Lining thickness ： 0410 mm x 220 mm x 19 mm
Total lining area 3,558af
Exhaust Brake
Type Air operated, butterfly valve type
Suspension
Front Semi-elliptic, parobolic leaf springs with shackle link (Taper leaf spring)
Type
Rear Semi-elliptic, laminated leaf springs with shackle link (Multi leaf spring)
Shock absorber Hydraulic double acting telescopic type on the front axle
Exhaust system
Conventional (horizontal) type muffler Box type
General Muffler With Diesel Oxidation Catalyst (For D6AB-
Catalyst muffler (PMC type)
D for Euro3 Emssion)
Tail pipe Droptail type, blowing to chassis rearward
Fuel tank
Capacity 200 liter
Material Steel (STD), Aluminum (OPT)
Frame
Type “H” type frame with channel sectional side rail & cross members
Main section side rail dimension (mm) Depth x Flange x Thickness ： 302 x 90 x 8t
Hyundai Commercial Vehicle SPECIFICATIONS_ 52
HYUNDAI HD Series_HD170 Cargo
Annotations
1) Empty vehicle weight and curb weight shown are to 3.5% variation to allow for production tolerance.
2) Empty vehicle weight and curb weight include weight of oil, fuel, coolant and spare tire carrier & bracket, spare tire but exclude standard tool set.
3) The vehicle specifications may differ per country.
4) Hyundai motor company reserves the right to alter the specifications, equipment or options or discontinue the models at any time without prior notice.
53 _Hyundai Commercial Vehicle SPECIFICATIONS
