0% found this document useful (0 votes)
823 views

Universal Remote Manual

This document provides instructions for programming a universal remote control using an auto-scan method. The steps are: 1. Press buttons 1 and 2 on the universal remote four times to enter programming mode, indicated by a quick flashing LED. 2. Place the original remote 2-3cm away and press a button to copy its code, identified by the LED turning on solid then flashing twice. 3. Press the same button on the original remote again. Then press a button on the universal remote to store the copied code, turning off the LED. The remote can copy codes from many brands like Acer, ADYX, Ballan, Beninca and more using this auto-scan method.

Uploaded by

Ariano Jacque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
823 views

Universal Remote Manual

This document provides instructions for programming a universal remote control using an auto-scan method. The steps are: 1. Press buttons 1 and 2 on the universal remote four times to enter programming mode, indicated by a quick flashing LED. 2. Place the original remote 2-3cm away and press a button to copy its code, identified by the LED turning on solid then flashing twice. 3. Press the same button on the original remote again. Then press a button on the universal remote to store the copied code, turning off the LED. The remote can copy codes from many brands like Acer, ADYX, Ballan, Beninca and more using this auto-scan method.

Uploaded by

Ariano Jacque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

UNIVERSAL REMOTE

• Best position for duplication

Auto-scan Type
2-3cm
~
-BFT
1.Hold on button 1 and press button 2 four times ,then release both
buttons,the led of universal remote emits a quick flash every 2 sec.
2.Place the original remote control in front of the remote, at about 2-3 cm of
distance
3.Press and retain pressed the button of the original remote control that you
want to copy until the remote's led will turn on with a fix light and then emits a
double flash every 2 sec.
II
:: 3.Press and retain pressed the button of the original remote control that
11 you want to copy until the remote's
II then emits a double flash every 2 sec.
led will turn on with a fix light and

II 4.Press and retain pressed once again the same button of the original
:: remote control.
II 6. Now the LED will flash quickly, press the button of the remote where
:: you want t.o store the code just copied, until the LED will turn off.
to insert the riew remote control
4.Transmit now the seed code of the original remote control (by pressing the 11 5.Now activate the&mlprocedure
Multi-frequency rear hide button or the buttons 1 and 2 simultaneously in the new models)
II on the receiver.
Up to 4 different remotes in 1 5. Now the LED will flash quickly, press the button of the remote where you
:: COMPATIBILITES LIST

II /\CM TX2 , TX2 COLOR, TX4


want to store the coMJmGMopied, until the LED will turn off.
PROGRAMMING: 6.Now activate the • procedure to insert the new remote control on the II ADYX I~ TE4433H BLUE. 433-HG BRAVO
-standard II
receiver. II COMPACT, HY-DOM, MERCURI B, MERCURIC, SABUTON, MARS.
AERF
1.Hold button 1 and press button 2 four times ,then II SATURN, ST31N. TERRA. TMP-1 , TMP-2, UNITECH
release both buttons, the led of universal remote -FAAC and GENIUS
II
ATTENT ION, PLEASE: Verify that the remote control to be copied is a II l/\LLMATI C ~BROWN, BROWN RED, BRO.OVER, PASS, MINIPASS. TECH3
emits a quick flash every 2 sec.
MAST Ell II APE RIO GO, GO PRO, GO MINI
2. Place and press the original remote control in front of II
Pressingpny button , the LED should issue a double flash rather than switch AP ERTO TX02-434-2 ,TX02-868-2 BLUE,4025 TX02-868-2,4022 TX02-434-2 , 4020-
the remote , at about 2-3 cm of distance.until the led of II
on immediately as a fixed light. II (Sommer) TX03-434 ,TX--03-868-4,4013,TX03-434-4
universal remote starts fla sh quickly.
1.Hold button 1 and press button 2 four times II APflMAT I~
3.While the LED of universal remote is flashing , press TR2/TR4, TM4, TXM
2.Place t~e original remote control in front of the remote, at about 2-3 cm of II c
the button of the universal remote where you want to 11 II ATA PTX4 BLUE, PTX4 PINK
store ,the remote's code just copied, until the led will turn :: distance ~ II
3.Press and retain pressed the original remote control button that you want to II AVIDSEN 104251, 104250, 104250 OLD, 104250 RED, 104257, 104350, 654250
off. 11 II
11 copy until the
LED universal remote switches on a fixed light and then It stars
N~~ II BALLAN FM400, FM400E,FM404B.4013
emit a double flash every 2 seconds.
To duplicate a second button, repeat the operation fro m :: to II !To. GO. WV. TWV, ROLLKEY. APPLE , LOT WCV, CUPIDO, TO.GO. av. 10,
II
~~M1. ~ 4.PrediSROSe the FAAC/GENIUS remote control for the emission of the seed II
BENINCA
~
LOT2WCV,LOT1W.LOT2W.LOT4W ,LOT1WM,LOT2WM, T2W ,T4W ,APPLE
code (by ressing sim ultaneously the buttons 2 and 3) II BEZAP,HIT
Automatic matching code: BESIDE
5.While the FAAC/G ENIUS LED is flashing , place it in front of the universal II
Pressing the button you want to match code. until the MITIO, MITIO M ( MITI02M/MITI04M), MITIO RCB (MITIO
remote at about 2-3 cm of distance and press the button that you want to copy BFT RCB02/RCB04), MITIO A (MITIO 2NMITIO 4A), MITIO B,
receiver emit! the code ,the led of the remote flash until the remote's led will change frequency of fl ashing (faster than before), as TRC(TRC2/TRC4), GHIBLI, MURALE. KLEIO,TE01 ,TE02,TE04,RB4
quickly ,then release the button ,the remote's code has ~
confirm of the correct copy of the code. MURALE
matched successfully . CAME T431. T434. TOP4 32A. TOP434A,TOP432, TAM432SA.TOP432NA
-V2
Emitting seed code: TRQ S449 (TRQ4491001TRQ4492001TRQ4493001TRQ449400), TRQ S449
Pressing the button 1 and button 2 at the same time 1. Hold button 1 and press button 2 four times ,then release both buttons, the
CARDIN GREEN (PRECODE), TXQ S449 (TXQ4492001TXQ4493001TXQ449400),
until LED flashes quickly . Release two buttons .press led of universal remote emits a quick flash every 2 sec.
TXQ 5449 GREEN, TRQ S486 (TRQ4862001TRQ486400). TXQ S486
the button that you want to emit seed code , it has 2. Place the original remote control in front of the remote, at about 2-3 cm of EDI (TXQ4862001TXQ486400), S437 TX, XRADO.S449,S476TX2,S476TX, S486
distance
emitted seed code successfully . CASALI JA33 AMIGO GENIUS/CASALI A252RC

L:.-.A.IY.f(.A.~!·9.r.i.l.~.i.f~.-. r.il~.!·~h.i.6i:.·.~·g4~.-.-.J
ERTS92B,ERTS92T,ERTS4760,ERTS20DQ,ERTS4760,ERTS476Q KBLUE ETH-TEL01
CASIT PROEM
I KEY 900TXB-42R,SUB44,TXB-44R ,TXG-44R
ER4C4ACS
CELISA S101, S10 2
KING GATES STYLO, CLIPPER PROGET ETY_ 433N2,ETY_ 433N4
CENTURION CLASSIC.SMART
KLING KUA KUA E KUA S PROTECO TX433,E UROMATI C
953ESTD, 371 LM, 971 LM, 84330E, 94334CE, 94333E/94334E/94335E, LABEL SPYCO,RJW4E
CHAMBERLAIN/LI 9747E, 1A5639-7, 1A5477, 1A6487, 132B2372 , MARTE,P215, TW IN, VARIO, VAR IO MARS, VARIO
LEB TMW PUJOL
FT MASTER/ 94330EMU9333EMU94335EML, 84330EMU84333EMU84335EML, OCEAN, NEO
MOTOR LIFT 8747EML LINCE LR2035
QUASAR 433
LIFE FIDO
RIB LITH IO
CLEMSA MUTANCDDE, T, T-8, E-CODE N, MASTERCODE MV MCT-11, ACT-21, ACT-22, STING RAY ACT-31, STING RAY ACT-
LINEAR ROPER
CPS TCP3, CPS1,TCP3,CPS2,TCP3,CPS4,TCP3 34B NEO, GO ROP ER, GO MINI RO PER
DASPI ~ HAPPY2.POPS 2, ZERO RC( ZERO 2RC.ZERO 4RC) MHOUSE TX4 SABUTOM BROOVER, BROSTAR
TR MI0, 133 1,433 2,433 4,GENIE,PUNTO S2, PUNTO 278, GOLDR, GENIE MA TX1,TX2 ,TX3 SEA SMART DIP
DEA SYSTEM
R 273, GENIE R-GT2N MARATEC 0101 ,01 2,DIGITAL302,DIGITAL304
BE HAPPY RS(BE-HAPPY-RS1 ,BE-HAPPY-RS2,BE-
DELMA MIXARD 433 1, MIXARD 433 2,KING 433 2 MERLIN/PROLIF SEAV HAPPY-RS3),BE-SMART RSX, BE-HAPPY RH1,BE-
M230T(PROLIFT),M430R(PROLIFT)
DICKERT MAHS433 01, MAHS433 04 T HAPPY RH2,B E-HAPPY RH3
DITEC ~ GOL,GOL4C,BIXLS2 ,BIXLP2,BIXAG4, BIXLG MERLIN2.0 E945M,E943M,E940M SECULUX NEO
DOITRAND MPSTF2E,JAUNE
DOORMATIC SAW MERLIN/PROLIF M842(GREENREMOTE),M832(GREEN REMOTE ), MB44(GREEN SILVELOX Mhz 2007, QUARZ SAW
DOORHAN TRANSM ITTER 4 T REMOTE ),C945,C940,C943
SICE 4790207
DUCATl TSAW1, TSAW2,TSAW3, 124,TE2 MHOUSE ~ TX4,TX3, GTX4
ECOSTAR RSE,RSC,RSZ SIMI NOR CVXNL, MI TTO, SIM433
MOOVO ~ MT4G
ELBE 501,502,504,502A,504A
IRIS, ROLLER 2, ROLLER 433, ROLLER 868, SOL4 33, SOL868, VEGA 433,
MONSEIGNEUR ARC ,, SECURVERA SV R2C,SV R4C,SV R6C
ERREKA SMILO,FLOR-S,VERY-VR, INTl,FL02,FL04, FLOR-SERA, ONE
SERAI
ELBE
VEGA868
501,502,504,502A,504A
~ (ON), ON ERA, ERGO, PLANO, ONE (ON FM ) OG/52,0G54,0G82,0G84,0G/28,0G48,0G62,0G64

NORTON NEO, TXCD, GO NORTON, GO MINI NORTON SIMINOR S433(2T-4T),ER2C4ACS,ER4C4ACS


ELCA IRI S.ASTER 2,ASTER 1000,ASTER 1001
XT4 433 RC,TM1 433 DS,TM2 433 DS,TM3 433 DS,433L2,433L4,TM22 433 NOVOTECNICA TELIS, K-EASY , K-EASY NEW, K-EASY OLD, MITTO, KE~
FAAC SLP,TM4 433 SLP, TML 433SLH, TML 868 SLH, DL 868 SLH , XT 868SLH , EDI BIXL2
SOM FY GO RTS , TELIS RTS, KEYTIS RTS , KEYTIS RTS NS,
~ XT 433 SLH, T 868 SLH T 433 SLH, XT 433 RC TE433HG NOVOTRON 502-504-512MIX43-2,MTR40-2,MCHS43-2,MH S43(2- ALARMA
FADINI ~JUBl-S MA LL ,433 M2, ASTRO 433-2,ASTRO 433-4, JUB12/JUBl4 4), MNHS433(2-4), MCHS, MINl-NOVOTRON 504, MICRO-
NOVOFERM 4010, 4011 , 4014 TX03-434-2, 4013 TX03-434-4, 4020
FERPORT TAC1 ,TAC2, TAC4,TAC 1K,TAC 2K,TAC 4K,TAC2KR NOVOTRON 502, MICRO-NOVOTRON 504, MICRO-NOVOTRON 31, SOMMER TX03-868-4 , 4026 TX03-868-2, 4022 TX02-434-2, 4025
MICRO-NOVOTRON 51 , MINl-NOVOTRON 30, MINl-NOVOTRON 50,
OPEN TMB , OP EN OUT, AU1600, AU1600 WOOD, AU 1680, AU1680 TX02-868-2 , 4031 TX08-868-4
GIBIDI MNH S
WOOD, DOMINO
STAGN OLI KALLISTO, VENUS AV223
NOLOGO ECO DIP
GULLIVER MOW I
NORMSTAHL T433
TAU ~ 250K-S LIM RP, 250K-SLIMR, 250T-4RP
GENIUS ~ AMIGO,AMIGOLD,KILO, BRAVO, ECHO

GITR-3, GIT, GICT390, GIFT390-1 , G3T-BX, G1T-BX, GM3T , GICTD, GIFTD


O&O
T.COM,TW IN,TX,TWIN,TX2/TX4(NEO),T.COM R4-2/T. COM R4-4,
I - T.COM R8-2/T.COM R8-4,
T ELCOMA FM 402, ~M 402 E, FM400E, FM400
~ OG OG62,0G64 TOR LI FT TORMIT4
AU01590,AU1600,DOMl-NO AU1680 WOOD,GI B IDI
GIBIDI OPEN OUT T MQ VOS ~ TRQ P,ECO-R
AU1610,AU1810,AU03000 ,DTC 4334
PECCININ TX MENBRANA
HORMANN HSM2,HSM4 VRAW FORD EA433 4K,SMART2,SMART3
PORTAMATIC MPH0 1,MPH02
JCM NEO, TWIN, GO, GO PORTIS, GO NORTON TC2E(4E),SLIM,BFOR,MPSTP2 E,MPSTF2,MPSTF4,MPSTF2RE, PHOENI X 433-868,TXC,TSC ,TRC,HANDY ,SERIE
PRASTEL V2 ROYAL:TR R/43,TRR2143,TRR4/43, PHOX 433
MPSTF4RE.,MPSTP2E,MPSTP2E BLUE, MTE(MT4E,MT2E ),TRQ-
JAY UBEI X1SL 1,UBET 11 ,UBET 21,UBET 31,UBET 41,UBET 61 ~
~ P(TRQ4P,TRQ2P), MPSTLE(MPSTL-1E,MPSTL-2E,MPSTL-4E)

You might also like