Scribd
Upload
436 views2 pages

Isolated Footing Design Excel Sheet

This document provides design details for a footing marked F-7. It includes: - Dimensions of the footing and relevant sections. - Material properties including concrete compressive strength, reinforcement yield strength, soil unit weights. - Calculations of footing self-weight, soil weight, total load, bearing capacity, and pressure under the footing. - Moment and shear force calculations at various sections of the footing. - Reinforcement details and checks for flexure, shear, and two-way shear.

Uploaded by

Ali Imran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
436 views2 pages

Isolated Footing Design Excel Sheet

This document provides design details for a footing marked F-7. It includes: - Dimensions of the footing and relevant sections. - Material properties including concrete compressive strength, reinforcement yield strength, soil unit weights. - Calculations of footing self-weight, soil weight, total load, bearing capacity, and pressure under the footing. - Moment and shear force calculations at various sections of the footing. - Reinforcement details and checks for flexure, shear, and two-way shear.

Uploaded by

Ali Imran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

DESIGN OF FOOTING MARKED :- F-7 cl (m) = 0.

400
cb (m) = 0.400
Y 2
l (m) = 0.400
My
b (m) = 0.400
L (a+c)/2
c a top ftn off l' (m) = 0.800
200 b' (m) = 0.800
l' L (m) = 0.800
1 cl 1 B (m) = 0.800
cb D1 (m) = 0.150
X B b' b X
D2 (m) = 0.150
Mx l Mx Dp (m) = 1.350
Depth of foundation 'DF' below
G.L (m) = 1.500
clear cover cx to R/F for forces
da b (b+d)/2
P about X-axis (m) = 0.060
My clear cover cy to R/F for forces
about Y-axis (m) = 0.050
Dp effective depth 'd1' for forces
DF about X-axis (m) = 0.090
D2 D1
effective depth 'd2' for forces
(c+d)/2
(a+b)/2 about Y-axis (m) = 0.100
Y 2
Unit wt. of Conc.'gc' (t/m ) =
3
2.500
Unit wt. of Soil. 'gs' (t/m3) = 1.800
Self wt. of footing and weight of soil on footing: fy (N/mm2) = 415
Wt. of footing (t) = 0.780 fck (N/mm2) = 25
Net Bearing Capacity 'qnet' (t/m2)
Wt. of soil over footing (t) = 1.166 = 20.4
Gross Bearing Capacity 'qgross'

Footing Wt.+Soil Wt.= (P1 )(t) = 1.946 =(qnet+DF x gs )(t/m2) = 23.087359837


maximum pressure under
Static /eq.case : footin 15.13
kN-m
P (t) etab staad= 7.739 75.922 Joint No. 18
Mx (t-m) or M33 Mz = 0.000 0
My (t-m) or M22 My = 0.000 0
Total Load(PT = P + P1 ) (t) = 9.686
partial safety factor 'fs' = 1.5
percent increase in qnet /qgross = 0

Pressure under footing(t/m2) = PT /(L x B) + Mx x 6 /(L x B2) + My x 6 /(B x L2)


a a bb cc dd
15.13 15.13 15.13 aa15.13
Pressure due to Wt.of footing + Wt.of soil = P1 /(L x B)(t/m2) = 3.04
Taking average of pressure and calculating moment at the face of pedestal :
About 1-1 : About 2-2 :
M (t-m) = 0.19 0.19
Mu = (fs x M)(t-m) = 0.29 0.29
ku (N/mm ) =2
Mu /(l' x d1 ) =2
0.448 Mu /(b' x d ) =
2
2
0.448
pt = 0.127 0.127
A st (mm ) =
2
pt x l' x d1 /100 = 91 pt x b' x d2/100 = 101
dia bar 8 c/c spa = 440 8 396

Taking average of pressure and calculating one-way shear force at "d" from the face of pedestal :
At 'd1' from 1-1: At 'd2' from 2-2:
V (t) = 1.06 0.97
Vu =(fs x V)(t) = 1.60 1.45
tv(N/mm ) =Vu/(Lx(D2-cx)+(L+b1')/2x{d1'-(D2-cx)}
2
tv(N/mm ) =Vu/(Bx(D2-cy)+(BL+b2')/2x{d2'-(D2-cy)}
2

where b1'=[l'+2x{d1-(b'-b)/2}x(L-l')/(B-b')](m)= 0.800 where b2'=[b'+2x{d2-(l'-l)/2}x(B-b')/(L-l')](m)= 0.800


d1'=[(D2-cx)+{d1 -(D2-cx)}/{(B-b')/2}x{(B-b)/2-d1}]= 0.090 d2'=[(D2-cy)+{d2 -(D2-cy)}/{(L-l')/2}x{(L-l)/2-d2}]= 0.100
tv(N/mm2) = 0.222 0.181
pt = 0.083 0.054
A st (mm ) =
2
pt x Agross1 = 86 pt x Agross2 = 96

Check for two-way Shear at "d/2" from the face of pedestal :


V(t) = {LxB-(l+d)x(b+d)}xqnet = 8.15
tv = Vu /(po x d) (N/mm ) 2
where po = ( l+b+2d )
tv(N/mm2) = 0.693 tc =(ksx0.25x(fck)1/2) (N/mm2) = 1.250
where ks=(1+E/F)but>1.0

Hence OK

a b c d
a

You might also like