Scribd
Upload
69 views2 pages

Masterair 721 v1

HDFC account no to login

Uploaded by

tally3tally
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views2 pages

Masterair 721 v1

HDFC account no to login

Uploaded by

tally3tally
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MasterAir®721

Air-entraining admixture for concrete


DESCRIPTION 100ml / 100kg of cement and adjust in the light of
results obtained.
MasterAir 721 is an air-entraining admixture which
creates ultra-stable air bubbles that are strong, APPLICATION
small and closely spaced.
MasterAir 721 is a ready-to-use liquid which is
RECOMMENDED USES dispensed into the concrete together with the
Entraining controlled air content in a wide range of mixing water. The plasticising effect and water
concrete types: reduction are higher if the admixture is added to
 Low slump concrete the damp concrete after 50 to 70% of the mixing
 Flowable concrete water has been added. The addition of MasterAir
 High temperature concrete 721 to dry aggregate or cement is not
 Concrete with extended working times recommended.
 Lightweight and pre-stressed concrete SUGGESTED SPECIFICATION
 Imparting workability to lean harsh mixes
The air entrainer for concrete shall be MasterAir
 Reducing bleeding caused by grading 721, pink free flowing liquid formulation free of
deficiencies in the concrete materials lignosulphonate and naphthalene polymers. The
FEATURES AND BENEFITS product shall have specific gravity n o t less than
The use of MasterAir 721 to entrain optimum air 1.00 and shall comply with ASTM C260 as air
content in concrete results in the following entrainer.
improvements in concrete quality: PACKAGING
 Improved ability to entrain and retain air in
concrete MasterAir 721 is supplied in 20 kg carboy and 210
 Improved air-void system in harden concrete kg drums or in bulk on request.
 Reduced permeability - increased STORAGE /SHELF LIFE
watertightness MasterAir 721 must be stored where
 Improved plasticity and workability temperatures do not drop below +5°C. If product
 Reduced segregation and bleeding has frozen, thaw at +5°C or above and completely
 Increased freeze / thaw resistance reconstitute using mild mechanical agitation. Do
 Increased resistance to scaling not use pressurized air for agitation. Store under
 Greatly improved stability of air entrainment cover, out of direct sunlight and protect from
PERFORMANCE TEST DATA extremes of temperature.
Shelf life is 12 months when stored as above.
Failure to comply with the recommended storage
conditions may result in premature deterioration of
Aspect : Pink free flowing liquid the product or packaging. For specific storage
advice consult your local MASTERS BUILDERS
Relative Density : 1.01 0.01 at 25°C SOLUTIONS representative.
pH : > 6 at 25°C PRECAUTIONS
Chloride ion content : < 0.2% As with all chemical products, care should be
taken during use and storage to avoid contact with
TEST CERTIFICATION/APPROVALS eyes, mouth, skin and foodstuffs (which can also
be tainted with vapour until product fully cured or
 ASTM C 260
dried). Treat splashes to eyes and skin
EN 934-2: T5 immediately. If accidentally ingested, seek
DOSAGE immediate medical attention. Keep away from
Optimum dosage of MasterAir 721 should be children and animals. Reseal containers after use.
determined in trial mixes. As a guide, a dosage Do not reuse containers for storage of consumable
range of 40ml to 800ml per 100kg of cementitious item. For further information refer to the material
material is recommended. As a starting point use safety data sheet.
TDS Ref. no.: MasterAir721/01/0714

Page 1 of 2
MasterAir®721

® = registered trademark of a MBCC Group member in many countries of the world

The technical information and application advice given in this Master Builders Solutions publication are based on the
STATEMENT OF present state of our best scientific and practical knowledge. As the information herein is of a general nature, no
RESPONSIBILITY assumption can be made as to a product's suitability for a particular use or application and no warranty as to its
(Disclaimer) accuracy, reliability or completeness either expressed or implied is given other than those required by law. The user
is responsible for checking the suitability of products for their intended use.

Field service where provided does not constitute supervisory responsibility. Suggestions made by Master Builders
NOTE Solutions either orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since
they, and not Master Builders Solutions, are responsible for carrying out procedures appropriate to a specific
application.

Master Builders Solutions India Private Limited


Registered office: Plot No D-126,
TTC Industrial Area, MIDC,
Shiravane, Navi Mumbai - 400706,
Maharashtra, India
Tel: +91 8657906776
E-mail: [email protected]
www.master-builders-solutions.com/en-in

You might also like