PRODUCT BROCHURE

RS1500 ROLL SIZER

FINES FREE
MINERAL SIZING

+44(0)2887 740525 [email protected] edgeinnovate.com

 CONVEYOR
CHOICE

FINES FREE.
MINERAL SIZING.
VARIABLE SPEED TWIN SIMPLE PIECE SIZE INTELLIGENT LOAD ECO-POWER
SHAFT CHAMBER ADJUSTMENT MANAGEMENT SAVING
TR622 SERIES
FEATURES & BENEFITS

The EDGE RS1500 roll-sizer has been designed for the secondary and KEY HIGHLIGHTS
tertiary crushing of medium-hard, sticky and soft materials such as coal,
• Variable speed twin shafts for accurate piece sizing.
lignite, clay, limestone and other bituminous and sub-bituminous
• Easy selective piece sizing controls.
materials.
• Produces less fines than any other similar product on the
market such as an impactor or jaw crusher.
Boasting an impressive list of design features that includes a highly
• Automatic control system protects against tramp metal or
efficient hydraulic drive system, easy selective piece sizing controls,
trapped material.
intelligent load sensing system and a five function remote control; the • HMI Control Panel provides easy fine tuning for accurate
RS1500 is packed with the most up to date technology and components. application performance.
Asset protection is provided via an effective tramp protection cycle that
allows for the chamber to automatically open when non-crushable
material is detected.

Combining a twin tooth rotor design and a single deck pre-screen allows
fines to pass through either before the material reaches the chamber
or by falling between the crushing rolls without being further crushed,
increasing processing efficiency and throughput whilst reducing wear
and dust creation. With impressive cubical piece size, minimal fines
creation, low power consumption and high tonnage per hour, the EDGE
RS1500 is the most sensible option for sizing applications.

4
RS1500
DESIGN FEATURES
Hopper capacity of 11.25m³
(1.7yds³) with a feed in height
of just 3.3m (10’ 9”)
A single deck, two bearing pre-screen
allows fines to by-pass the chamber,
increasing processing efficiency
1400mm (55”) wide heavy duty feeder belt and throughput
with load sensing controls to prevent
material overload.

The hydraulic folding, 650mm (26”) wide,

fines discharge conveyor provides a
discharge height of up to
3084mm (10’1”)

The Sizing Chamber houses two independent

variable speed, reversible roller shafts for
accurate piece sizing

Allows operators to track, start / stop the

unit, increase & decrease engine revs,
increase & decrease feeder belt speed as The Control Interface provides easy fine tuning for
well as opening and closing the chamber accurate application performance.
for different piece sizing.

6
Powered by a CATERPILLAR C9 industrial
power unit with an average fuel consumption
of 25-30 Ltr/hr. (6-8USG).
Tier 4 Final / Stage V engine option also
available

The 1150mm (46”) wide product discharge

conveyor provides a discharge height of
up to 3.5m (11’8”)

APPLICATIONS

COAL LIMESTONE GLASS ASPHALT SOFT ORES

7
RS1500
TECHNICAL SPECIFICATIONS

TRANSPORT DIMENSIONS FEED CONVEYOR DATA

Length: 18102mm (59’4”) Conveyor Length: 4361mm (14’3”)
Width: 3010mm (9’10”) Belt Width: 1400mm (55”)
Height: 3447mm (11’3”) Belt Speed: Variable
Container Shipping Method: RoRo
Gross Weight (Est): 36000KG (39.7UST)
CHAMBER DATA SIDE DISCHARGE CONVEYOR DATA
Drive Type: Hydraulic Conveyor Length: 5920mm (19’5”)
Number of Shafts: 2 Belt Width: 650mm (29”)
Chamber Torque: 14,000Nm (10,325ft-lb) Discharge Height: 3084mm (10’1”)
Shaft Length: 1660mm (5’5”)
Shaft Diameter: 560mm (22”)

HOPPER DATA PRODUCT DISCHARGE CONVEYOR DATA

Hopper Capacity: 11.25m³ (14.7 yds³) Conveyor Length: 11300mm (37’8”)
Hopper Width: 4100mm (13’6”) Belt Width: 1150mm (46”)
Loading Height: 3300mm (10’9”) Discharge Height: 3560mm (11’8”)
Hopper Extensions: Manual Fold in Mechanism

PRE-SCREEN DATA POWERUNIT DATA

Screen Type: Single deck, two bearing screen box Power Source: LRC - CAT C9 260Kw (350HP)
Screen Area: 3.94m² (4.7yrd²) TIER 4 FINAL - C7 205Kw (275HP)
Screen Angle: 12° Fuel Tank Capacity: 540 Litres (142USG)
Screen Media: Various media options available

AVAILABLE OPTIONS

Tier 3 LRC Engine Hydraulic Feeder Wing Plates Dust Suppression

Tier4 Final / Stage V Engine Manual Feeder Wing Plates Hydraulic Hopper Jack Legs
Electric / Hydraulic (Static Only) Hardox Hopper Liners Belt Scales & Data Log
Overband Magnet Punch Plate Sceen Media Heavy Duty Ply Belts
Magnetic Head Drum & Chute Bofar Bar Screen Media Wireless Remote
Reversible Fan Woven Mesh Screen Media
Auto Lube System Fines Discharge Conveyor

8
 RS1500
TECHNICAL DIMENSIONS
RS1500 OPERATIONAL DIMENSIONS

18566 (60’10”)
4516 (14’9”)

3560 (11’8”)
4604 (15’1”)
7679 (25’2”)

RS1500 TRANSPORT DIMENSIONS

18102 (59’4”)
3447 (11’3”)

1000 (3’3”)
3010 (9’10”)

9
AVAILABLE
OPTIONS
CONFIGURATIONS
POWER-SOURCE

LRC - Cat C9 260Kw (350HP) Electric / Hydraulic - Only available with a

Tier 4 Final - Cat C7 205Kw (275HP) Static mounted chassis.
PRE-SCREEN MEDIA
OPTIONS

Woven Mesh Screen Media Punch Plate Screen Media Bofar Bar Screen Media

Manual / Hydraulic Feeder Wing Plates Hardox Hopper Liners Fines Discharge Conveyor

Overband Magnet Central Auto Lubrication System Wireless Remote Control

SEPARATION OPTIONS

Additional customisation is available

upon request. Speak to your nearest
ADDITIONAL

EDGE distributor for details.

Dust Suppression Hydraulic Hopper Jack Legs

10
 PRODUCT AND
TECHNICAL SUPPORT
TRIED, TESTED & TRUSTED THROUGHOUT THE GLOBE
With our ethos of “Innovation at Work” EDGE not only persist in pushing the boundaries of design and
manufacturing to produce hard working, quality machinery, we also bring that same ethos to our aftersales
service in order to bring real benefits to customers right across the world.

At EDGE we like to see the sales transaction as the start of a long-term partnership. Our goal is to offer the
best customer support in the market for the lifetime of the unit. EDGE has reinvested and expanded our
aftersales department in order to streamline and provide the customer support we believe our customers
deserve.

TECHNICAL PARTS DELIVERY WARRANTY

ASSISTANCE AVAILABILITY
 2020.01

CONTACT US
TODAY.

30 Farlough Road, Dungannon, Co.Tyrone, BT71 4DT, Northern Ireland

+44(0)2887 740525 [email protected] edgeinnovate.com