Scribd
Upload
56 views

Ex 4 and 5 Observation

The document provides procedures for creating orthographic and sectional views of simple geometric shapes like a cone, cylinder, and hexagon using AutoCAD. It lists the objectives, required commands, steps to create the views, and expected outcomes of understanding the concepts.

Uploaded by

jagadeesh jagadeesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views

Ex 4 and 5 Observation

The document provides procedures for creating orthographic and sectional views of simple geometric shapes like a cone, cylinder, and hexagon using AutoCAD. It lists the objectives, required commands, steps to create the views, and expected outcomes of understanding the concepts.

Uploaded by

jagadeesh jagadeesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

CREATION OF ORTHOGRAPHIC VIEWS OF A CONE,

CYLINDER AND HEXOGON


EX.NO:
DATE :

OBJECTIVES:
1. To study the orthographic views of objects.
2. To draw the orthographic views like front view and top view of
simple
cone, cylinder and hexagon using various auto CAD draw commands,
annotations and layers.
Aim:
To draw the orthographic views like front view and top view of simple
cone, cylinder and hexagon AutoCAD software.
List of commands required:
Limits, Zoom, Line, Circle, Arc, Mirror and Trim annotation and
layers.
Procedure:
1. Open a new sketch sheet of metric standard.
2. Set the limits by using the LIMITS command.
3. Zoom the screen by Zoom Command and give all to get entire screen
visible.
4. Draw the title block as per dimensions.
5. Make the required modifications using modifying commands.
6. Mark the necessary dimensions.
7. Insert necessary texts
Result:
Thus the orthographic views like front view and top view of simple
cone, cylinder and hexagon by using AutoCAD software.
OUTCOMES:
The orthographic views like front view and top view of simple cone,
cylinder and hexagon were created using various auto CAD draw
commands, annotations and layers and the concept of creation was
understood.
Instructor Signature Incharge Signature
CREATION OF SECTIONAL VIEWS OF CONE, CYLINDER AND
HEXOGON
EX.NO:
DATE :

OBJECTIVES:
1. To study the orthographic views.
2. To understand the concept of sectional views in simple solids.
3. To draw the sectional front view and sectional top view of a simple
cone, cylinder and hexagon.
Aim:
To draw the sectional orthographic views like front view and top view
of simple cone, cylinder and hexagon AutoCAD software.
List of commands required:
Limits, Zoom, Line, Circle, Arc, Mirror and Trim.
Procedure:
1. Open a new sketch sheet of metric standard.
2. Set the limits by using the LIMITS command.
3. Zoom the screen by Zoom Command and give all to get entire screen
visible.
4. Draw the title block as per dimensions.
5. Make the required modifications using modifying commands.
6. Mark the necessary dimensions.
7. Insert necessary texts
Result:
Thus the sectional orthographic views like front view and top view of
simple cone, cylinder and hexagon by using AutoCAD software.
OUTCOMES:
The sectional orthographic views like front view and top view of simple
cone, cylinder and hexagon were created and the concept of sectional
views creation was understood.
Instructor Signature Incharge Signature

You might also like