Multi-station manifold blocks RE 48107/04.

06
Replaces: 10.05
1/8

Type HSR 06

Nominal size 6
Component series 2X; 3X
Maximum operating pressure 315 bar

H5565

Overview of contents Features

Contents Page – The following are available as vertical stacking assemblies:
Features 1 • Pressure reducing valve ZDR to RE 26570
Ordering details 2 • Pressure relief valve ZDB to RE 25751
Unit dimensions 3 to 6 • Double check valve Z2S to RE 21548
Fixing screws and permissible operating pressure 7 and 8 • Check valve Z1S to RE 21533
Engineering guidelines 8 • Double throttle check valve Z2FS to RE 27506
• Pressure switch HED 8 to RE 50060
Features • Sandwich plates to RE 48050
• Directional valve:
– Multi-station manifold blocks form the basis for ready to con- - Electrical operation, type WE to RE 23178
nect, as vertical stacking assembles, control circuits - Fluidic operation, types WH and WP to RE 22282
– Very compact hydraulic circuits can be built-up on each axis, - Mechanical, manual operation, type WM… to RE 22280
using vertically stacked sandwich plate valves in combination • Proportional valve:
with NS6 directional control valves or proportional valves. - Direct operated, without feedback, type WRA to
– All circuits have a common pressure and tank port which are RE 29055
positioned on each end of the manifold. - Direct operated with electrical feedback, type WRE
– Each control station has separate actuator ports A and B, to RE 29061
which can be on the side (version C) or on the underside • Blanking plate, Material No. R900316232
(version D) as required.

Information on available spare parts:

www.boschrexroth.com/spc
2/8 Bosch Rexroth AG Hydraulics HSR 06 RE 48107/04.06

Ordering details: manifold without built-on valves

PLATTE HSR 06 *
No. of control circuit stations in a Further details in clear text
vertical stacking assembly C= Actuator ports on side
for 1 control (on request) =1 D= Actuator ports on underside
for 2 controls =2
01 = Pipe threads to ISO 228 part 1
for 3 controls =3
02 = Metric ISO threads to DIN 3852 part 1
for 4 controls =4
03 = NPT threads
for 5 controls =5
for 6 controls =6 2X = Component series 20 to 29 (20 to 29: unchanged
for 7 controls =7 installation and connecting dimensions)
for 8 controls =8 With enlarged connection threads
for 9 controls =9 3X = Component series 30 to 39 (30 to 39: unchanged
installation and connecting dimensions)
for 10 controls = 10
06 = Nominal size 6
Manifolds with • Test points
• Pressure reducing function as well as To order a multi-station manifold block with built-on valves
• Other functions on request! see below.
Required ordering details example for a manifold block assembly
.0
A1 B1 .01 A2 B2
Example:
2-station manifold block T1 T2
to circuit diagram P1 P2
HS-115-B234
.15 .25

.14
.24

.13
.23
A B
M a b
P T
.12

1) Material No. is defi-

.11
A B ned by the factory!
a b
P T

Item Qty. Unit description Type code Material No.

.0 1 Manifold block assembly 2HSR 06 C2X/115B234... 1)

.01 1 Manifold block PLATTE 2HSR 06-25/01C R900172220

.11 1 Directional valve 4WE 6 J6X/EG24N9K4 R900561288
.12 1 Pressure reducing valve ZDR 6 DA2-4X/150Y R900410849
.13 1 Double check valve Z2S 6 -2-6X/ R900347496
.14 1 Double throttle check valve Z2FS 6 -2-4X/2QV R900481624
.15 1 Check valve Z1S 6 T1-3X/V R900417569
4 Stud M5 x 210-10.9 DIN 939 R900012018
4 Hexagon nut M5-A3C RN 145.15-C45 R900009433
.23 1 Directional valve 4WE 6 J6X/EG24N9K4 R900561288
.24 1 Double check valve Z2S 6 -2-6X/ R900347496
.25 1 Double throttle check valve Z2S 6 -2-4X/2QV R900481624
4 S.H.C.S. M5 x 130-10.9 DIN 912 R900014920
RE 48107/04.06 HSR 06 Hydraulics Bosch Rexroth AG 3/8

Unit dimensions: actuator ports on side „C“ – Component series 2X (Dimensions in mm)
.11 .21 .31 .41 .51 .61 .71 .81 .91 .101
Up to
.12 .22 .32 .42 .52 .62 .72 .82 .92 .102
315 bar See ordering example,
.13 .23 .33 .43 .53 .63 .73 .83 .93 .103 page 2
.14 .24 .34 .44 .54 .64 .74 .84 .94 .104
.15 .25 .35 .45 .55 .65 .75 .85 .95 .105

5
1

H
60
.1

2HSR 06–2X/..C
123
3HSR 06–2X/..C
178
4HSR 06–2X/..C
233
288 1 This dimension for each individual
5HSR 06–2X/..C vertical stacking assembly is de-
343
6HSR 06–2X/..C pendent upon the valves fitted
398
7HSR 06–2X/..C
8HSR 06–2X/..C
453 2 Manifold block fixing holes
9HSR 06–2X/..C
508 3 Solenoid „a“
10HSR 06–2X/..C
563
L9 4 Solenoid „b“
L8 5 For notes regarding sandwich plate
L7 valves, see page 2
L6 6 This dim. ( ) is dependent on the
L5 length of the directional control val-
L4 ve fitted
L3
Ø 6,8
L2 2
L1
61,5 6 4
5
52 42
8 3x 18
M8x11

B
T2 P2

P1
62,5

()
80
72
8

32,5

44
44

A
T1
18

18
18

3
42
Manifold
26 55 55 55 55 block
55 55 55 55 55 L1 L2 L3 L4 L5 L6 L7 L8 L9
2-station 118
16

A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 3-station 116,5 173

44

B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 4-station 116,5 171,5 228

5-station 116,5 171,5 226,5 283
36 55 55 55 55 55 55 55 55 55
6-station 116,5 171,5 226,5 281,5 338
7-station 116,5 171,5 226,5 281,5 336,5 393
8-station 116,5 171,5 226,5 281,5 336,5 391,5 448
9-station 116,5 171,5 226,5 281,5 336,5 391,5 446,5 503
10-station 116,5 171,5 226,5 281,5 336,5 391,5 446,5 501,5 558
Thread type Pipe threads to ISO 228 part 1 Metric ISO threads to DIN 3852 part 1 NPT threads
Port A1..A10; B1..B10 P1, P2, T1, T2 A1..A10; B1..B10 P1, P2, T1, T2 A1..A10; B1..B10 P1, P2, T1, T2
Thread Ø G 3/8 G 1/2 M16 x 1,5 M18 x 1,5 3/8“ NPT 1/2“ NPT
Thread depth 12 14 12 12 17,5 23
Spot face Ø 28 34 28 28 – –
Spot face depth 1 1 1 1 – –
4/8 Bosch Rexroth AG Hydraulics HSR 06 RE 48107/04.06

Unit dimensions: actuator ports on side „C“ – Component series 3X (Dimensions in mm)
Up to 315 bar, with .11 .21 .31 .41 .51 .61 .71 .81 .91 .101
enlarged connec- .12 .22 .32 .42 .52 .62 .72 .82 .92 .102
tion thread Up to 315 bar, with
.13 .23 .33 .43 .53 .63 .73 .83 .93 .103 enlarged connection
.14 .24 .34 .44 .54 .64 .74 .84 .94 .104 thread
.15 .25 .35 .45 .55 .65 .75 .85 .95 .105

5
1

H
.1

110
2HSR 06–3X/..C 120
175 1 This dimension for each indivi-
3HSR 06–3X/..C
dual vertical stacking assemb-
4HSR 06–3X/..C 230
ly is dependent upon the val-
5HSR 06–3X/..C 285 ves fitted
6HSR 06–3X/..C 340
2 Manifold block fixing holes
7HSR 06–3X/..C 395
3 Solenoid „a“
450
8HSR 06–3X/..C 4 Solenoid „b“
505
9HSR 06–3X/..C 5 For notes regarding sandwich
560
10HSR 06–3X/..C plate valves, see page 2
6 This dim. ( ) is dependent on
555 the length of the directional
445 control valve fitted
335 Ø 6,8
225 2
115 6 4
5

87 87
49 49
8 3 x M8x13
B
T2

T1
()
80

P1
61

P2

59
59

40

A
21

102
21

29,5
8

3
41 50,5 59,5 50,5 59,5 50,5 59,5 50,5 59,5 50,5

A1 A2 A3 A4 A5 A6 A7 A8 A9 A10
B1 B2 B3 B4 B5 B6 B7 B8 B9 B10
62
25

Thread type Pipe threads to ISO 228 part 1 Metric ISO threads to NPT threads
DIN 3852 part 1
Port A1..A10; B1..B10 P1, P2, T1, T2 A1..A10; B1..B10 P1, P2, T1, T2 A1..A10; B1..B10 P1, P2, T1, T2
Thread Ø G 1/2 G 3/4 M22 x 1,5 M27 x 2 1/2“ NPT 3/4“ NPT
Thread depth 14 16 14 16 23 23
Spot face Ø 34 42 34 42 – –
Spot face depth 1 1 1 1 – –
RE 48107/04.06 HSR 06 Hydraulics Bosch Rexroth AG 5/8

Unit dimensions: actuator ports on underside „D“ – Component series 2X (Dimensions in mm)
L9
Up to 315 bar
L8
L7
L6
L5
L4 8
L3
L2
3 7 L1
61,5 3
5

40
40

23,5
35,5
32

18
40
35,5
18
10

36
A

A
52,5

P1 T1

52,5
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10

73
P2
77

T2

85
()

B1 B2 B3 B4 B5 B6 B7 B8 B9 B10

B
B

10

70
3x
50 32
M8x13
34 55 55 55 55 55 55 55 55 55 Ø 6,8
4 6 2 4
.11 .21 .31 .41 .51 .61 .71 .81 .91 .101
.12 .22 .32 .42 .52 .62 .72 .82 .92 .102 See ordering
.13 .23 .33 .43 .53 .63 .73 .83 .93 .103 example on
.14 .24 .34 .44 .54 .64 .74 .84 .94 .104 page 2
.15 .25 .35 .45 .55 .65 .75 .85 .95 .105

5 1

H
.1

60
2HSR 06–2X/..D 123
3HSR 06–2X/..D 178
4HSR 06–2X/..D 233
5HSR 06–2X/..D 288
6HSR 06–2X/..D 343
7HSR 06–2X/..D 398
8HSR 06–2X/..D 453
9HSR 06–2X/..D 508
10HSR 06–2X/..D 563

1 This dimension for each individual vertical stacking assem- Manifold L1 L2 L3 L4 L5 L6 L7 L8 L9

bly is dependent upon the valves fitted block
2 Manifold block fixing holes 2-station 118
3 Solenoid „a“ 3-station 116,5 173
4 Solenoid „b“ 4-station 116,5 171,5 228
5 For notes regarding sandwich plate valves, see page 2 5-station 116,5 171,5 226,5 283
6 1 external hole for each manifold block; dimensions for ex- 6-station 116,5 171,5 226,5 281,5 338
ternal holes 7-station 116,5 171,5 226,5 281,5 336,5 393
7 This dim. ( ) is dependent on the length of directional con- 8-station 116,5 171,5 226,5 281,5 336,5 391,5 448
trol valve fitted 9-station 116,5 171,5 226,5 281,5 336,5 391,5 446,5 503
8 Distance of valve porting pattern to the edge of the manifold 10-station 116,5 171,5 226,5 281,5 336,5 391,5 446,5 501,5 558
Thread type Pipe thread to ISO 228 part 1 Metric ISO threads to NPT thread
DIN 3852 part 1
Port A1..A10; B1..B10 P1, P2, T1, T2 A1..A10; B1..B10 P1, P2, T1, T2 A1..A10; B1..B10 P1, P2, T1, T2
Thread Ø G 3/8 G 1/2 M16 x 1,5 M18 x 1,5 3/8“ NPT 1/2“ NPT
Thread depth 12 14 12 12 17,5 23
Spot face Ø 28 34 28 28 – –
Spot face depth 1 1 1 1 – –
6/8 Bosch Rexroth AG Hydraulics HSR 06 RE 48107/04.06

Unit dimensions: actuator ports on underside „D“ – Component series 3X (Dimensions in mm)
555
Up to 315 bar, 445 7
with enlarged con- 335
nection threads 225
115 Ø 6,8
3 6 5 2 3
38

30,5
33,5
38
21

21
8

A
A

P1 T1
41 A1 A2 A3

70,5
A4 A5 A6 A7 A8 A9 A10
T2
79

()

79
100
92

B3 B4 B5 B6 B7 B8 B9 B10
P2

B1 B2

B
B

3x 35 35
M8x13
72
35
85,5
4 44
145
195,5
255
305,5
365
415,5
475
525,5
.11 .21 .31 .41 .51 .61 .71 .81 .91 .101
.12 .22 .32 .42 .52 .62 .72 .82 .92 .102
.33
see ordering ex-
.13 .23 .43 .53 .63 .73 .83 .93 .103
ample on page 2
.14 .24 .34 .44 .54 .64 .74 .84 .94 .104
.15 .25 .35 .45 .55 .65 .75 .85 .95 .105

5
1
H

.1
80

2HSR 06–3X/..D 120

3HSR 06–3X/..D 175
4HSR 06–3X/..D 230
5HSR 06–3X/..D 285
6HSR 06–3X/..D 340
7HSR 06–3X/..D 395
8HSR 06–3X/..D 450
505
9HSR 06–3X/..D
560
10HSR 06–3X/..D
1 This dimension for each individual vertical stacking assemb- 5 For notes regarding sandwich plate valves, see page 2
ly is dependent upon the valves fitted 6 This dim. ( ) is dependent on the length of directional cont-
2 Manifold block fixing holes rol valve fitted
3 Solenoid „a“ 7 Distance of valve porting pattern to the edge of the mani-
4 Solenoid „b“ fold
Thread type Pipe thread to ISO 228 part 1 Metric ISO threads to NPT threads
DIN 3852 part 1
Port A1..A10; B1..B10 P1, P2, T1, T2 A1..A10; B1..B10 P1, P2, T1, T2 A1..A10; B1..B10 P1, P2, T1, T2
Thread Ø G 1/2 G 3/4 M22 x 1,5 M27 x 2 1/2“ NPT 3/4“ NPT
Thread depth 14 16 14 16 23 23
Spot face Ø 34 42 34 42 – –
Spot face depth 1 1 1 1 – –
RE 48107/04.06 HSR 06 Hydraulics Bosch Rexroth AG 7/8

Fixing screws and permissible operating pressure in relation to the valves fitted
Selection table for vertical stacking assembly in conjunction with directional valve WE 6 (also see page 8!), Cl = clamping length

Tensile strength
Double Pres. switch S.H.C.S.

Material No.

Operat. pres.
pmax in bar
Pressure Pressure Double throttle with DIN 912
reducing relief check Check check sandwich Studs
valve valve valve valve valve plate DIN 939
(Cl = 40 mm) (Cl = 40 mm) (Cl = 40 mm) (Cl = 40 mm) (Cl = 40 mm) (Cl = 40 mm) MA = 9 Nm
ZDR 6 D...-4X/... M5 x 90 ISO 4762 10.9 R913000222 315
Z.DB 6 V...-4X/... M5 x 90 ISO 4762 10.9 R913000222 315
Z2S 6 ..-6X/... M5 x 90 ISO 4762 10.9 R913000222 315
Z1S 6 ..-.. /... M5 x 90 ISO 4762 10.9 R913000222 315
Z2FS 6-4X/V M5 x 90 ISO 4762 10.9 R913000222 315
HED 8 OH1X/.. M5 x 90 ISO 4762 10.9 R913000222 315
ZDR 6 D...-4X/... Z.DB 6 V...-4X/... M5 x 130 DIN 912 10.9 R900014920 315
ZDR 6 D...-4X/... Z2S 6 ..-6X/... M5 x 130 DIN 912 10.9 R900014920 315
ZDR 6 D...-4X/... Z1S 6 ..-.. /... M5 x 130 DIN 912 10.9 R900014920 315
ZDR 6 D...-4X/... Z2FS 6-4X/V M5 x 130 DIN 912 10.9 R900014920 315
ZDR 6 D...-4X/... HED 8 OH1X/.. M5 x 130 DIN 912 10.9 R900014920 315
Z.DB 6 V...-4X/... Z2S 6 ..-6X/... M5 x 130 DIN 912 10.9 R900014920 315
Z.DB 6 V...-4X/... Z1S 6 ..-.. /... M5 x 130 DIN 912 10.9 R900014920 315
Z.DB 6 V...-4X/... Z2FS 6-4X/V M5 x 130 DIN 912 10.9 R900014920 315
Z.DB 6 V...-4X/... HED 8 OH1X/.. M5 x 130 DIN 912 10.9 R900014920 315
Z2S 6 ..-6X/... Z1S 6 ..-.. /... M5 x 130 DIN 912 10.9 R900014920 315
Z2S 6 ..-6X/... Z2FS 6-4X/V M5 x 130 DIN 912 10.9 R900014920 315
Z2S 6 ..-6X/... HED 8 OH1X/.. M5 x 130 DIN 912 10.9 R900014920 315
Z1S 6 ..-.. /... Z2FS 6-4X/V M5 x 130 DIN 912 10.9 R900014920 315
Z1S 6 ..-.. /... HED 8 OH1X/.. M5 x 130 DIN 912 10.9 R900014920 315
Z2FS 6-4X/V HED 8 OH1X/.. M5 x 130 DIN 912 10.9 R900014920 315
ZDR 6 D...-4X/... Z.DB 6 V...-4X/... Z2S 6 ..-6X/... M5 x 170 DIN 939 10.9 R900230414 315
ZDR 6 D..-4X/.. Z.DB 6 V...-4X/... Z1S 6 ..-.. /... M5 x 170 DIN 939 10.9 R900230414 315
ZDR 6 D...-4X/... Z.DB 6 V...-4X/... Z2FS 6-4X/V M5 x 170 DIN 939 10.9 R900230414 315
ZDR 6 D...-4X/... Z.DB 6 V...-4X/... HED 8 OH1X/.. M5 x 170 DIN 939 10.9 R900230414 315
ZDR 6 D...-4X/... Z2S 6 ..-6X/... Z1S 6 ..-.. /... M5 x 170 DIN 939 10.9 R900230414 315
ZDR 6 D...-4X/... Z2S 6 ..-6X/... Z2FS 6-4X/V M5 x 170 DIN 939 10.9 R900230414 315
ZDR 6 D...-4X/... Z2S 6 ..-6X/... HED 8 OH1X/.. M5 x 170 DIN 939 10.9 R900230414 315
ZDR 6 D...-4X/... Z1S 6 ..-.. /... Z2FS 6-4X/V M5 x 170 DIN 939 10.9 R900230414 315
ZDR 6 D...-4X/... Z1S 6 ..-.. /... HED 8 OH1X/.. M5 x 170 DIN 939 10.9 R900230414 315
ZDR 6 D...-4X/... Z2FS 6-4X/V HED 8 OH1X/.. M5 x 170 DIN 939 10.9 R900230414 315
Z.DB 6 V...-4X/... Z2S 6 ..-6X/... Z1S 6 ..-.. /... M5 x 170 DIN 939 10.9 R900230414 315
Z.DB 6 V...-4X/... Z2S 6 ..-6X/... Z2FS 6-4X/V M5 x 170 DIN 939 10.9 R900230414 315
Z.DB 6 V...-4X/... Z2S 6 ..-6X/... HED 8 OH1X/... M5 x 170 DIN 939 10.9 R900230414 315
Z.DB 6 V...-4X/... Z1S 6 ..-.. /... Z2FS 6-4X/V M5 x 170 DIN 939 10.9 R900230414 315
Z.DB 6 V...-4X/... Z1S 6 ..-.. /... HED 8 OH1X/... M5 x 170 DIN 939 10.9 R900230414 315
Z.DB 6 V...-4X/... Z2FS 6-4X/V HED 8 OH1X/... M5 x 170 DIN 939 10.9 R900230414 315
Z2S 6 ..-6X/... Z1S 6 ..-.. /... Z2FS 6-4X/V M5 x 170 DIN 939 10.9 R900230414 315
Z2S 6 ..-6X/... Z1S 6 ..-.. /... HED 8 OH1X/... M5 x 170 DIN 939 10.9 R900230414 315
Z1S 6 ..-.. /... Z2FS 6-4X/V HED 8 OH1X/... M5 x 170 DIN 939 10.9 R900230414 315
ZDR 6 D...-4X/... Z.DB 6 V...-4X/... Z2S 6 ..-6X/... Z1S 6 ..-.. /... M5 x 210 DIN 939 10.9 R900012018 250
ZDR 6 D...-4X/... Z.DB 6 V...-4X/... Z2S 6 ..-6X/... Z2FS 6-4X/V M5 x 210 DIN 939 10.9 R900012018 250
ZDR 6 D...-4X/... Z.DB 6 V...-4X/... Z2S 6 ..-6X/... HED 8 OH1X/... M5 x 210 DIN 939 10.9 R900012018 250
Z.DB 6 V...-4X/... Z2S 6 ..-6X/... Z1S 6 ..-.. /... Z2FS 6-4X/V M5 x 210 DIN 939 10.9 R900012018 250
Z.DB 6 V...-4X/... Z2S 6 ..-6X/... Z1S 6 ..-.. /... HED 8 OH1X/... M5 x 210 DIN 939 10.9 R900012018 250
Z2S 6 ..-6X/... Z1S 6 ..-.. /... Z2FS 6-4X/V HED 8 OH1X/... M5 x 210 DIN 939 10.9 R900012018 250
ZDR 6 D...-4X/... Z.DB 6 V...-4X/... Z2S 6 ..-6X/... Z1S 6 ..-.. /... Z2FS 6-4X/V M5 x 250 DIN 939 10.9 R900012020 210
ZDR 6 D...-4X/... Z2S 6 ..-6X/... Z1S 6 ..-.. /... Z2FS 6-4X/V HED 8 OH1X/... M5 x 250 DIN 939 10.9 R900012020 210
ZDR 6 D...-4X/... Z.DB 6 V...-4X/... Z1S 6 ..-.. /... Z2FS 6-4X/V HED 8 OH1X/... M5 x 250 DIN 939 10.9 R900012020 210
ZDR 6 D...-4X/... Z.DB 6 V...-4X/... Z2S 6 ..-6X/... Z2FS 6-4X/V HED 8 OH1X/... M5 x 250 DIN 939 10.9 R900012020 210
ZDR 6 D...-4X/... Z.DB 6 V...-4X/... Z2S 6 ..-6X/... Z1S 6 ..-.. /... HED 8 OH1X/... M5 x 250 DIN 939 10.9 R900012020 210
Z.DB 6 V...-4X/... Z2S 6 ..-6X/... Z1S 6 ..-.. /... Z2FS 6-4X/V HED 8 OH1X/... M5 x 250 DIN 939 10.9 R900012020 210
Directional conrol valve WE 6-6X + multi-station manifold block HSR 06 M5 x 50 ISO 4762 10.9 R913000064 315
Proportional valve WR.6 + multi-station manifold block HSR 06 M5 x 40 ISO 4762 10.9 R913000139 315
8/8 Bosch Rexroth AG Hydraulics HSR 06 RE 48107/04.06

Fixing screws and permissible operating pressure in relation to the valves fitted
Notes:
• The screw selection table shown on page 7 is not valid for • Directional valves with central connections „D“, „DL“, „DZ“
directional valves protected against sea water, because these and „DZL“ can only be used with S.H.C.S. or studs and
directional valves have different clamping lengths (for dimensions nuts RN 115.43-C45V, Material No. R900176106.
see catalogue sheets on sea water protected directional valves)
Nut M5 DIN 939, tensile class 10.9 Nut M5 A3C RN 115.43-C45V, Material No. R900176106

Ø 8,5
M5
M5
M5

6,5 22
SA/F4
SW4 22
L
33
L see screw selection table
Hexagon nut M5-A3C RN 145.15-C45
Material No. R900009433
M5
Ø9

4
SA/F10
SW10 11
Engineering guidelines
Pressure reducing valve Pressure relief valve com- The installation of sandwich plates with 2 pressure switches
combined with a double bined with a double check with manifold blocks with actuator ports on side „C“ is not
check valve valve possible.
The pressure reducing val- Leak-free closure of the actu- Pressure switches combined with a double throttle check valve
ve ZDR..DA (with pressu- ator is not possible, if a pres-
re reduction in port A) must sure relief valve type ZDB../ Meter-in control Meter-out control
always be fitted between Z2DB.. effective in port A The pressure switch The pressure switch
the directional valve and the and/or B is used with a doub- HED 8 OH, effective in port HED 8 OH, effective in port A
double check valve Z2S.. . le check valve. A and/or B, is fitted between and/or B, is fitted between the
Leak-free closure of the sys- the subplate and the double directional valve and the doub-
tem cannot otherwise be throttle check valve Z2FS. le throttle check valve Z2FS.
ensured. A B T
P
P A B T P A B T P A B T

P A B T
M
P A B T
P A B T
P A B T

P A B T P A B T P A B T
P A B T
A B A B A B A B

P T P T P T P T

The circuits shown are only examples.

These engineering design guidelines also apply to valves of similar design and function.

Bosch Rexroth AG © This document, as well as the data, specifications and other
Hydraulics information set forth in it, are the exclusive property of Bosch Rexroth
Zum Eisengießer 1 AG. Without their consent it may not be reproduced or given to third
97816 Lohr am Main, Germany parties.
Phone +49 (0) 93 52 / 18-0 The data specified above only serve to describe the product. No
Fax +49 (0) 93 52 / 18-23 58 statements concerning a certain condition or suitability for a certain
[email protected] application can be derived from our information. The information given
www.boschrexroth.de does not release the user from the obligation of own judgment and
verification. It must be remembered that our products are subject to a
natural process of wear and aging.