Scribd
Upload
131 views

User's Manual - Climbing System - v3.0

This document provides instructions for setting up and using a climbing system package for character movement. It describes how to set up the project, build a climbing character, setup the scene, configure fall damage, and integrate with mobile or shooter systems. Support is available by email.

Uploaded by

Denis Dolmazon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
131 views

User's Manual - Climbing System - v3.0

This document provides instructions for setting up and using a climbing system package for character movement. It describes how to set up the project, build a climbing character, setup the scene, configure fall damage, and integrate with mobile or shooter systems. Support is available by email.

Uploaded by

Denis Dolmazon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

CLIMBING SYSTEM MANUAL

Developed by Dias Games


CONTENT

1 INTRODUCTION ...................................................................................................... 3
2 SETUP PROJECT....................................................................................................... 4
3 BUILD CHARACTER .................................................................................................. 4
4 SETUP SCENE .......................................................................................................... 6
5 CAUSE DAMAGE AFTER FALL FROM HIGH HEIGHTS ............................................... 7
6 MOBILE SETUP ........................................................................................................ 8
7 2.5D SETUP ............................................................................................................. 8
8 INTEGRATIONS ....................................................................................................... 8
8.1 INCONTROL INTEGRATION ..................................................................................... 8
8.2 SHOOTER SYSTEM .................................................................................................. 8
9 SUPPORT ................................................................................................................ 9
1 INTRODUCTION
Climbing System is a package that contains all scripts to make character climb ledges, ladders,
overcome obstacles, run on walls and more.

Watch the following video to setup your project fast:


https://youtu.be/3gbskMTw97s

IMPORTANT: Always backup your project before any update


2 SETUP PROJECT
You can watch this tutorial: https://youtu.be/hIMO7HIvLAg
To make Climbing System works properly, you must setup your Input data and Layer Collisions
first. To do this, go to: Tools -> Third Person System -> Setup Project Settings.

A new window will be opened. There are two buttons, to set Input and Layer Collisions. Click on
both to set your project properly.

Now your project is ready to proceed with setup.

3 BUILD CHARACTER

Go to Tools -> Third Person System -> Build Climbing Character menu to open Climbing Character
Builder Window

Build Character window will be opened.


In Character field, select the target character from Hierarchy.
You can also set character height. Normally, character comes with 1.8 m.
Press Build Climbing Character.
4 SETUP SCENE
To setup scene, adding camera, Game Controller and UI, go to Tools -> Third Person System -> Setup
Scene:

Setup Window will be opened. Click on the buttons to add Camera, Game Controller and UI. After
that, close the window.
5 CAUSE DAMAGE AFTER FALL FROM HIGH HEIGHTS
Fall ability allows you to set damage to your character when he falls from too high heights.

To cause damage on landing, you have to check Cause Damage On Land. Then you can set the
minimum height that cause damage (Min Height to Cause Damage) and the maximum height that
character must die (Height To Die). The damage amount is calculated based on a linear interpolation
between these both values.
If you don’t want to use this functionality, you can disable damage simply unchecking Cause
Damage On Land.
IMPORTANT: Height To Die must be always greater than Min Height to Cause Damage.
6 MOBILE SETUP
You can watch this tutorial: https://www.youtube.com/watch?v=HyhsA34NWBI

7 2.5D SETUP
Watch this video to get your character working as 2.5D: https://youtu.be/9bsjM7D1bxE

8 INTEGRATIONS

8.1 INCONTROL INTEGRATION

To get InControl integration scripts, send an e-mail to [email protected] with your Invoice
Number.

8.2 SHOOTER SYSTEM


To work with Shooter System, you only need to build Climbing Character before Build Shooter
Character. System automatically detects the climbing abilities and you don’t need to do extra setups.
9 SUPPORT
Any doubts or suggestions, send an e-mail to: [email protected]
Thank you for your purchase!

You might also like