SD card real time data logger

Two channels for Pt 100 ohm input + type K, J, R, E, T, S

LUTRON ELECTRONIC
 SD Card real time recorder
Two channels for PT 100 ohm input
PRECISION 0.01 degree THERMOMETER
Model : PM-9017SD
* Type K/J/T/E/R/S, Pt 100 ohm, measurement . Sampling Time Approx. 1 second.
* Type K : -100 to 1300 ℃. of Display
* Type J : -100 to 1200 ℃. Data Output RS 232/USB PC computer interface.
* Pt 100 ohm : -199.99 to 850.00 ℃. * Connect the optional RS232 cable
* ℃/℉, 0.01 degree / 0.1 degree / 1 degree. UPCB-02 will get the RS232 plug.
* 2 channels ( Pt 1, Pt 2, Pt 1- Pt 2 ), 1 channels * Connect the optional USB cable
Thermocouple Type K or J/T/R/E/S . USB-01 will get the USB plug.
* Microcomputer circuit provides intelligent function and high Power off Auto shut off saves battery life or
accuracy. manual off by push button.
* Offset adjustment for the Type K/J/T/E/R/S measurement. Operating 0 to 50 ℃.
* Offset adjustment for the Pt 100 measurement. Temperature
* Measuring unit can select to ℃ or ℉. Operating Less than 85% R.H.
* Real time SD memory card Datalogger, it Built-in Clock Humidity
and Calendar, real time data recorder, sampling time set Power Supply * Batterise : ( UM3, AA ) X 6 PCs,
from 1 second to 3600 seconds. or equivalent.
* Manual datalogger is available ( set the sampling * AC/DC power adapter is optional.
time to 0 second ), during execute the manual datalogger adapter is optional ).
function, it can set the different position ( location ) No. Power Current Normal operation ( w/o SD card save
( position 1 to position 99 ). data and LCD Backlight is OFF) :
* Innovation and easy operation, computer is not need to Approx. DC 8.5 mA.
setup extra software, after execute datalogger, just take When SD card save the data but and
away the SD card from the meter and plug in the SD card LCD Backlight is OFF) :
into the computer, it can down load the all the measured Approx. DC 30 mA.
value with the time information ( year/month/date/ * AC/DC power adapter is optional.
hour/minute/second ) to the Excel directly, thenuser can consumption will increase approx.
make the further data or graphic analysis by themselves. 14 mA.
* SD card capacity : 1 GB to 16 GB. Weight 278 g/0.61 LB ( meter only ).
* LCD with green light backlight, easy reading. Dimension 177 x 68 x 45 mm
* Can default auto power off or manual power off. (7.0 x 2.7x 1.9 inch)
* Data hold, record max. and min. reading. Accessories * Instruction manual........................1 PC
* Microcomputer circuit, high accuracy. Included
* Power by UM3/AA ( 1.5 V ) x 6 batteries or DC 9V adapter. Optional * Type K thermocouple probe.
* RS232/USB PC COMPUTER interface. Accessories TP-01, TP-02A. TP-03, TP-04, TP-05.
* Heavy duty & compact housing case. * Pt 100 ohm probe, TP-100.
* SD Card ( 4 GB )
General Specifications * USB cable, USB-01.
Circuit Custom one-chip of microprocessor LSI * RS232 cable, UPCB-02.
circuit. * Data Acquisition software,
Display LCD size : 52 mm x 38 mm SW-U801-WIN., SW-E802.
LCD with green backlight ( ON/OFF ). * AC to DC 9V adapter.
Channels Pt1, Pt2, Pt1- Pt2, Thermocouple Type . * Hard carrying case, CA-06.
Sensor type Type K thermocouple probe. * Soft carrying case, CA-05A.
Type J/T/E/R/S thermocouple probe.
Pt 100 ohm probe Electrical Specifications
* Cooperate with an 0.00385 alpha
coefficient, meet DIN IEC 751. PT 100 ohm
Resolution 0.01℃/0.1℃/1℃, 0.01℉/ 0.1℉/1 ℉.
Datalogger Auto 1 second to 3600 seconds Resolution Range Accuracy
Sampling Time @ Sampling time can set to 1 second, 0.01 ℃ -199.99 to 850.00 ℃ ± ( 0.4 % + 1 ℃ )
Setting range but memory data may loss. 0.01 ℉ -327.00 to 1562.00 ℉ ± ( 0.4 % + 1.8 ℉ )
Manual Push the data logger button * Pt 100 ohm probe TP-101 is the optional accessory.
once will save data one time.
@ Set the sampling time to Type K/J/T/E/R/S
0 second.
@ Manual mode, can also select the Sensor Resolution Range Accuracy
1 to 99 position ( Location ) no. Type
Memory Card SD memory card. 1 GB to 16 GB. Type K 0.1 ℃ -50.1 to -100.0 ℃ ± ( 0.4 % + 1 ℃ )
Advanced * Set clock time ( Year/Month/Date, -50.0 to 1300.0 ℃ ± ( 0.4 % + 0.5 ℃ )
setting Hour/Minute/ Second ) 0.1 ℉ -58.1 to -148.0 ℉ ± ( 0.4 % + 1.8 ℉ )
* Set sampling time -58.0 to 2372.0℉ ± ( 0.4 % + 1 ℉ )
* Auto power OFF management Type J 0.1 ℃ -50.1 to -100.0 ℃ ± ( 0.4 % + 1 ℃ )
* Set beep Sound ON/OFF -50.0 to 1200.0℃ ± ( 0.4 % + 0.5 ℃ )
* Decimal point of SD card setting 0.1 ℉ -58.1 to -148.0 ℉ ± ( 0.4 % + 1.8 ℉ )
* SD memory card Format -58.0 to 2192.0 ℉ ± ( 0.4 % + 1 ℉ )
* Set temperature unit to ℃ or ℉ Type T 0.1 ℃ -50.1 to -100.0 ℃ ± ( 0.4 % + 1 ℃ )
* Set thermocouple type to K/J/R/E/T/S. -50.0 to 400.0 ℃ ± ( 0.4 % + 0.5 ℃ )
Temperature Automatic temp. compensation for the 0.1 ℉ -58.1 to -148.0 ℉ ± ( 0.4 % + 1.8 ℉ )
Compensation type K/J/T/E/R/S thermometer. -58.0 to 752.0 ℉ ± ( 0.4 % + 1 ℉ )
Linear Linear Compensation for the full range. Type E 0.1 ℃ -50.1 to -100.0 ℃ ± ( 0.4 % + 1 ℃ )
Compensation -50.0 to 900.0 ℃ ± ( 0.4 % + 0.5 ℃ )
Offset Available for Type K/J/T/E/R/S and 0.1 ℉ -58.1 to -148.0 ℉ ± ( 0.4 % + 1.8 ℉ )
Adjustment Pt 100 ohm. -58.0 to 999.9 ℉ ± ( 0.4 % + 1 ℉ )
Probe Input Type K/J/T/E/R/S : 2 pin thermocouple socket. 1℉ 1000 to 1652 ℉ ± ( 0.4 % + 2 ℉ )
Socket Pt 100 ohm : 4 DIN socket. Type R 1 ℃ 0 to 1700 ℃ ± ( 0.5 % + 3 ℃ )
Over Indication Show " - - - - ". 1℉ 32 to 3092 ℉ ± ( 0.5 % + 5 ℉ )
Data Hold Freeze the display reading. Type S 1 ℃ 0 to 1500 ℃ ± ( 0.5 % + 3 ℃ )
Memory Recall Maximum & Minimum value. 1℉ 32 to 2732 ℉ ± ( 0.5 % + 5 ℉ )
* Appearance and specifications listed in this brochure are subject to change without notice. 1501-TM9017SD