K to 12 BASIC EDUCATION Budget of Work (BOW)

TECHNICAL LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL

TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – TECHNICAL DRAFTING (NC II)
Grade 9, 10, 11 and 12

No. of Days
QUARTER LEARNING COMPETENCIES
Taught
Grade 9/11
FIRST QUARTER
LESSON 1: DRAFTING ARCHITECTURAL LAYOUT AND DETAILS (AL)
LO 1. Prepare architectural job requirements
FIRST 1
1.1 Prepare tools, materials, and equipment in technical drawing
QUARTER 1.2 Select drawing tools, materials, and equipment in accordance with the
1
SOP
1.3 Assess architectural job requirements based on SOP 1
1.4 Interpret blueprint according to architectural layout drawing/job
Week 1 requirements following SOP and work instructions 1

LO 2. Prepare and set up tools and materials for drawing

2.1 Observe OHS policies and procedures in setting-up tools and 1
materials for drawing
Week 2 2.2 Prepare drawing tools, materials and equipment based on job
1
requirements
2.3 Set up tools, materials, and equipment based on the job requirements 2
LO 3. Draft site development plan
3.1 Draw a technical descrip-tion of a lot according to the approved lot 3
survey
3.2 Draw a building footprint according to the architectural drafting
Week 3-5 3
standards
3.3 Draw a title block according to the architectural drafting standards 3
3.4 Indicate dimension lines, dimensions, and drawing titles according to
architectural drafting standards 3

LO 4. Draft floor plans

4.1 Draw walls, windows, doors, fixtures, and fittings according to 6
Week 6-8 architectural design standards
4.2 Draw grid and dimension lines according to architectural design
6
standards
SECOND QUARTER
SECOND 4.3 Use metric scale system according to the magnitude of the plan
4
QUARTER
4.4 Identify sizes of doors, walls, and rooms following the schedule
Indicate letterings and labels according to the drafting standards 4
Week 9-10
LO 5. Draft roof plans
5.1 Indicate the dimensions of the roof plan based on the floor plan 3

5.2 Draw roof plans according to drafting standards 2

Week 11-13 5.3 Use standard architectural symbols in drafting roof plans 2
5.4 Layout drawings according to sheet contents 2
5.5 Draw framing details of roof plan according to architectural drafting
standards 3

LO 6. Draft ceiling plans

6.1 Draw vertical heights from finish floor line to ceiling line according to 6
Week 14-16 architect-tural drafting standards
6.2 Indicate lighting fixtures and fire protection devices on the ceiling
plan based on architectural drafting standards 6

Page 1 of 4
 K to 12 BASIC EDUCATION Budget of Work (BOW)
TECHNICAL LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL
TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – TECHNICAL DRAFTING (NC II)
Grade 9, 10, 11 and 12

No. of Days
QUARTER LEARNING COMPETENCIES
Taught
THIRD QUARTER
LO 7. Draft elevations and sections
THIRD QUARTER 7.1 Draw vertical heights from grade line according to architectural drafting
standards 2
7.2 Project offsets from right, left, and rear sides of floor plan according
2
to architectural drafting standards
7.3 Draw roof eaves and pitch on all elevations and sections according to
2
architectural drafting standards
7.4 Project doors and windows in all elevations and sections
2
7.5 Project cross and longitu-dinal section views from the floor plans and
2
elevations
Week 17-19 7.6 Indicate various material symbols and specifications in all elevations
and section 2

LO 8. Submit complete drawings

8.1 Follow the SOP when submitting the completed drawing to 1
appropriate personnel (e.g., Engineer, Architect)
8.2 Note comments and corrections for final drawings following the SOP
1
Week 20
8.3 Integrate comments and corrections into the final drawing based on
1
job requirements
8.4 Perform housekeeping procedures following the SOP
1

LESSON 2: DRAFTING STRUCTURAL LAYOUT AND DETAILS (SL)

LO 1. Draft foundation plans
1.1 Indicate the locations of wall footings, footings, and columns in 4
Week 21-22 drafting the floor plan
1.2 Draw in a larger scale details of wall footings, footings, and columns
4
LO 2. Draft structural floors and roof framing plans
2.1 Draft structural floor and roof framing plans based on floor and
Week 23-24 7
foundation plans using timber, concrete, or steel construction

FOURTH QUARTER
FOURTH 2.2 Draft structural floor and roof beams showing sizes, shapes, and
QUARTER detailed connections 5
Week 25
LESSON 3: DRAFTING ELECTRICAL AND ELECTRONIC LAYOUT AND DETAILS (EL)
LO 1. Draft electrical plans and layouts
1.1 Draft lighting and power layouts according to electrical drafting 3
standards
Week 26-27 1.2 Place riser diagram and circuiting symbols in electrical plans and
3
layouts according to Electrical Code
1.3 Indicate legend and general notes according to local power service
provider 2

LO 2. Draft auxiliary system and layout

2.1 Layout fire alarm and protection system symbols in the auxiliary
Week 28-30 6
system and layout plan according to Fire Code

Page 2 of 4
 K to 12 BASIC EDUCATION Budget of Work (BOW)
TECHNICAL LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL
TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – TECHNICAL DRAFTING (NC II)
Grade 9, 10, 11 and 12

No. of Days
QUARTER LEARNING COMPETENCIES
Taught
2.2 Layout electronic and communication devices according to electrical
drafting requirements 6

ENTREPRENEURSHIP 8

Grade 10/12
FIRST QUARTER
LESSON 1: PREPARING COMPUTER-AIDED DRAWING (CA)
FIRST LO 1. Operate CAD software and computer hardware
QUARTER 1.1 Identify CAD software features according to the software provider 4

1.2 Explore CAD working environment

Week 1-2 4

Week 3-8 1.3 Manipulate CAD features as per job requirement 24

SECOND QUARTER
SECOND
QUARTER
1.4 Manipulate CAD features as per job requirement 8
Week 9-10
LO 2. Prepare plan using CAD
2.1 Observe OHS policies and procedures in when preparing plan using 2
CAD
Week 11-18 2.2 Set up drawings according to standard drawing scale and paper
2
size
2.3 Prepare working drawings using CAD software as per building
standards 20

THIRD QUARTER
THIRD LO 2. Prepare plan using CAD
QUARTER 2.4 Prepare working drawings using CAD software as per building
standards 16

Week 19-20
LESSON 2: DRAFTING STRUCTURAL LAYOUT AND DETAILS USING CAD (LC)
LO 1. Draft foundation plans
2.1 Indicate the locations of wall footings, footings, and columns in 4
drafting the floor plan
Week 21-22
2.2 Draw on a larger scale details of wall footings, footings, and
columns 4

LO 2. Draft structural floors and roof framing plans

2.1 Draft structural floor and roof framing plans based on floor and
Week 23-24 foundation plans using timber, concrete, or steel construction 8

Page 3 of 4
 K to 12 BASIC EDUCATION Budget of Work (BOW)
TECHNICAL LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL
TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – TECHNICAL DRAFTING (NC II)
Grade 9, 10, 11 and 12

No. of Days
QUARTER LEARNING COMPETENCIES
Taught
FOURTH QUARTER
FOURTH LO 2. Draft structural floors and roof framing plans
QUARTER 2.2 Draft structural floor and roof beams showing sizes, shapes, and
detailed connections
4
Week 25

LESSON 3: DRAFTING ELECTRICAL AND ELECTRONIC LAYOUT AND DETAILS USING CAD (EC)
LO 1. Draft electrical plans and layouts
1.1 Draft lighting and power layouts according to electrical drafting 3
standards
Week 26-27 1.2 Place riser diagram and circuiting symbols in electrical plans and
3
layouts according to Electrical Code
1.3 Indicate legend and general notes according to local power service
provider 2

LO 2. Draft auxiliary system and layout

2.1 Layout fire alarm and protection system symbols in the auxiliary 6
Week 28-30 system and layout plan according to Fire Code
2.2 Layout electronic and communication devices according to
electrical drafting requirements 6

ENTREPRENEURSHIP 8

Prepared:

CECILIA A. CARAAN
Teacher III
Halang Banaybanay Integrated School
Amadeo, Cavite

Page 4 of 4