ROOM TEMPERATURE

TRANSMITTERS
TXRC Series

Precision temperature
control/sensing
FEATURES:
• Precision RTD sensing element
• Choice of scaled ranges and outputs
• Various options: Setpoint Adjustment, Override, etc.
• Custom laser etching available

Peace of mind
through reliable
temperature monitoring
GREYSTONE HAS AN ISO 9001 REGISTERED QUALITY SYSTEM
DESCRIPTION:
The TXRC Series room temperature transmitter is a precision current loop transmitter. It utilizes the platinum RTD
and is available in various configurations. The transmitter provides a high accuracy signal with excellent long term
stability, low hysteresis and fast response while being virtually immune to power supply noise and input voltage
fluctuations. All models operate on a wide range of AC or DC power supplies.

The TXRC is supplied in an attractive wall mount enclosure. The universal back plate can be mounted directly to
several electrical box styles or directly on any wall.

The TXRC has various options available such as setpoint adjustment, manual override, etc. that allows for use in
a multitude of applications.

SPECIFICATIONS :
Sensor................................................................1000 ohm or 100 ohm Platinum RTD
Sensor Accuracy.............................................±0.3˚C (±0.54˚F) @ 0˚C (32˚F)
Output Signal..................................................4-20mA current loop, 0-5 vdc, or 0-10 Vdc
(factory configured)
Transmitter Accuracy ...................................±0.1% of span, including linearity
4-20 mA loop Power Supply......................15-35 Vdc or 22-32 Vac
Minimum Current Loop ..............................2 mA nominal (occurs with shorted sensor)
Maximum Loop Current..............................22.5 mA nominal (occurs with open sensor)
Maximum Loop Load...................................>600 ohms
0-5 Vdc Power Supply ..................................10-35 Vdc or 10-32 Vac
0-10 Vdc Power Supply................................15-35 Vdc or 15-32 Vac
Maximum Current (Voltage)......................5 mA nominal
Maximum Output (Voltage) ......................Limited to <5.5 Vdc for 0-5 Vdc, <10.5 for 0-10 vdc
Input Voltage Effect......................................Negligible over specified operating range
RFI Rejection ...................................................Good RFI rejection of normal frequencies
Protection Circuitry.......................................Reverse voltage protected and output limited
Operating Conditions ..................................0 - 50˚C (32 - 122˚F), 0-95% RH non-condensing
Enclosure..........................................................White ABS - IP30 (NEMA 1)
84mmW x 117mmH x 29mmD (3.3” x 4.6” x 1.15”)
Wiring Connections......................................Screw terminal block (14 to 22 AWG)

OPTIONS:

Setpoint Adjustment
Type....................................................................Front panel slidepot, 2 wire resistance output
Range.................................................................0K to 10K Ω standard
Custom spans available ..............................1K, 2K, 5K, 10K or 20K Ω
Manual Override
Type....................................................................Front panel, momentary pushbutton
Front panel pushbutton..............................50 mA @12 Vdc, N.O., SPST

Status LED Input

Signal Type.......................................................Active high, low or 2-wire, 5 V current limited standard
LED Colors........................................................Yellow (Y), Red (R) or Green (G),
Power Supply..................................................5 Vdc standard, 10 or 24 Vdc optional

Communication Jacks
Molex .................................................................4 Pin header to 4 pin terminal block. Requires HHTA - Hand Held Adapter

Fan Speed Switch

Type....................................................................Side mounted, 5 position slide switch
Designators .....................................................Off, Auto, Low, Medium, High
Signal .................................................................2 wire, resistance output - 0, 2, 4, 6, 8 KΩ
Custom ranges available, contact Greystone
TXRC - ROOM TEMPERATURE TRANSMITTER:
PRODUCT ORDERING INFORMATION:
MODEL Product Description
TXRC Room Temperature Transmitter

CODE Sensor
2 100 Ω Platinum, IEC 751, 385 Alpha, thin film
12 1000 Ω Platinum, IEC 751, 385 Alpha, thin film (Standard)

CODE Transmitter Output

A 4-20 mA
D 0-5 Vdc
E 0-10 Vdc

CODE Scaled Transmitter Range

1 0˚C - 35˚C (32˚F - 95˚F)
2 0˚C - 50˚C (32˚F - 122˚F)

CODE Options (Multiple selections can be made)

P 0-10K linear slide pot for set point control (Other ranges available, contact Greystone)
S Front panel push button momentary switch (NO)
Y Yellow LED
R Red LED
G Green LED
E External jack for remote system access (4-pin header)
F Fan Speed Switch, 5 position, (Off, Auto, Low, Mid, High)

TXRC 12 A 2 P S
Greystone Energy Systems, Inc. reserves the right to make design modifications without prior notice.
NOTE: Due to the many possible configurations, special part numbers may be required, please contact Greystone for more information.

PCB/WIRING INFORMATION
Terminal Function

POWER Power input

COMMON GND or COMMON
OUTPUT Analog Output 4-20 mA, 0-5 or 0-10 Vdc
SETPNT + Resistance Output
SETPNT - GND or COMMON
LED + Vdc input (5 Vdc standard)
LED - GND or COMMON
SWITCH + Digital output
SWITCH - GND or COMMON
FAN + Resistance output
FAN - GND or COMMON
1 To External Jack PIN 1
2 To External Jack PIN 2
3 To External Jack PIN 3
4 To External Jack PIN 4

* Some models do not have all these features

**To save on number of connection wires, all GND or COMMON may
connected together.
***Illustration shows standard wiring configuration. Custom
configurations are available. Please contact Greystone.
DIMENSIONS:

84 mm 29 mm 58 mm
3.3“ 1.15 “ 2.3 “

119 mm
4.7“ 82.6 mm
3.25 “

ACCESSORIES:

02/15
HHTA-XXX
The HHTA - Handheld Adapter converts the
Greystone standard 4 pin connector to the
connector of choice such as a RJ12, phone jack.

PB-TXRC-01-01
Several styles and configurations are available.
Please contact Greystone.

Copyright © Greystone Energy Systems Inc. All Rights Reserved

ENERGY SYSTEMS INC Greystone Energy Systems Inc. is one of North America’s
largest ISO registered manufacturers of HVAC sensors and
Greystone Energy Systems, Inc. transmitters for Building Automation Management Systems.
150 English Drive, Moncton, We have conscientiously established a worldwide
New Brunswick, Canada E1E 4G7 reputation as an industry leader by maintaining leading-
(506) 853-3057 Fax : (506) 853-6014 edge design technology, prompt technical support, and a
North America: 1-800-561-5611 commitment to on-time deliveries. We take pride in our
PRINTED IN CANADA

e-mail: [email protected] Quality Management System which is ISO 9001 certified,

www.greystoneenergy.com assuring our customers of consistent product reliability.

GREYSTONE HAS AN ISO 9001 REGISTERED QUALITY SYSTEM