Technical Specifications

Rev. R - 06/2021

Consolidated™

1900/1900 DM Series
Safety Relief Valves
With the Eductor Tube Advantage™

The highly adaptable 1900 & 1900

Dual Media (DM) Series Safety
Relief Valves are designed to meet
numerous application requirements.

Baker Hughes Data Classification : Public

Table of Contents
Conversion Table................................................................................................................................................2

1900/1900 DM Overview ...............................................................................................................................3-6

How Pressure Relief Valves Operate......................................................................................................... 7-8

Product Features.......................................................................................................................................... 9-10

1900 Dual Media (DM) Certified Valves................................................................................................. 11-12

Design Options................................................................................................................................................... 12

1900 Dual Media (DM) Cryodisc.................................................................................................................... 13

1900 Dual Media (DM) High Pressure (Block Body)................................................................................ 13

1900 Steam Trim (TD) Valves ........................................................................................................................ 14

1900 Liquid Trim (LA & LA1) Valves............................................................................................................... 15

1900 Restricted Lift Valves.............................................................................................................................. 16

Soft Seat Applications...................................................................................................................................... 17

1900/1900 DM Soft Seat (DA) Option........................................................................................................... 18

Soft Seat (DA) Option - How the Double Seal Works.............................................................................. 19

Materials......................................................................................................................................................20-44
1900/1900 DM Conventional Safety Relief Valve...........................................................................................................................20
1900/1900 DM Materials of Construction - Conventional........................................................................................................ 21
1900/1900 DM Balanced Bellows Safety Relief Valve................................................................................................................. 22
1900/1900 DM Materials of Construction - Balanced Bellows............................................................................................. 23
1900/1900 DM Balanced Piston Safety Relief Valve.....................................................................................................................24
1900/1900 DM Materials of Construction - Balanced Piston.................................................................................................25
1900/1900 DM Soft Seat (DA) Option Safety Relief Valve........................................................................................................26
1900 Steam Trim (TD) Option Safety Relief Valve........................................................................................................................ 27
1900 Liquid Trim (LA & LA1) Option Safety Relief Valve..............................................................................................................28
1900/1900 DM Special Material and Service Options.................................................................................................................29
NACE Trims ..........................................................................................................................................................................................................30
Hydrofluoric Acid (HA) Service .................................................................................................................................................................. 31
Corrosive Service........................................................................................................................................................................................32-38
Low Temperature....................................................................................................................................................................................... 39-40
High Temperature............................................................................................................................................................................................... 41
Valves for Lethal Service................................................................................................................................................................................42
1900/1900 DM O-ring Selection........................................................................................................................................................ 43-44
Accessories..................................................................................................................................................45-51
Caps, Levers, and Accessories......................................................................................................................................................... 45-46
Valve Position Indicators...............................................................................................................................................................................46
Packed Lever / Plain Lever............................................................................................................................................................................ 47
Bolted Cap / Cap with Gag.........................................................................................................................................................................48
Cap with Gag........................................................................................................................................................................................................48
Cap and Lever Construction............................................................................................................................................................. 49-50
Bolt-on Jackets..................................................................................................................................................................................................... 51

Dimensions and Weights........................................................................................................................ 52-60

1900/1900 DM Flanged Series Conventional Safety Relief Valve...........................................................................................................52
D and E Orifice........................................................................................................................................................................................53
F and G Orifice........................................................................................................................................................................................54
H and J Orifice........................................................................................................................................................................................55
K and L Orifice.........................................................................................................................................................................................56
N and M Orifice....................................................................................................................................................................................... 57
P and Q Orifice........................................................................................................................................................................................58
R and T Orifice.........................................................................................................................................................................................59
U, V, and W Orifice................................................................................................................................................................................60

Pressure and Temperature Tables....................................................................................................... 61-90

Selection Charts for Vapors, Gases and Liquids...................................................................................................................................... 61-90

1900 GS/1900 DM Capacities.................................................................................................................. 91-92

1900 TD Capacities.................................................................................................................................... 93-94

1900 LA/LA1 & 1900 DM Capacities....................................................................................................... 95-96

1900 TD Superheat Correction...................................................................................................................... 97

1900/1900 DM Series Valve Configuration Code........................................................................... 98-100

1900 DM Series API 10/15K Valve Configuration Code.................................................................. 101-102

Ordering a 1900/1900 DM Safety Relief Valve.........................................................................................103

 Baker Hughes provides a full range of Consolidated pressure relief
valve styles, sizes, options and configurations for multiple industries,
applications, environments, and media. From spring-actuated to
pilot-operated, each pressure relief valve is configured to offer
safer process flow control in harsh environments.

Conversion Table
All the USCS values are converted to
metric values using the following conversion factors:

USCS Unit Conversion Factor Metric Unit

in. 25.4 mm

lb. 0.4535924 kg

in2 cm2
6.4516

ft3/min 0.02831685 m3/min

gal/min 3.785412 L/min

lb/hr 0.4535924 kg/hr

psig 0.06894757 barg

ft lb 1.3558181 Nm

°F 5/9 (°F-32) °C

2 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Scope of Design
1900/1900 DM Overview
Standard Valve Connection - D Orifice Standard Valve Connection - E Orifice
API ASME API ASME

Orifice in 2 0.110 in 2 0.128 Orifice in 2 0.196 in 2 0.228

Area cm 2 0.710 cm 2 0.825 Area cm 2 1.265 cm 2 1.470

Inlet Outlet Inlet Outlet

Valve Size ASME Size ASME Valve Size ASME Size ASME
Type Std. Std. Type Std. Std.
in. mm Class in. mm Class in. mm Class in. mm Class

1905 1.00 25.4 150 2.00 50.8 150 1905 1.00 25.4 150 2.00 50.8 150

1906 1.00 25.4 300 2.00 50.8 150 1906 1.00 25.4 300 2.00 50.8 150

1910 1.00 25.4 300 2.00 50.8 150 1910 1.00 25.4 300 2.00 50.8 150

1912 1.00 25.4 600 2.00 50.8 150 1912 1.00 25.4 600 2.00 50.8 150

1914 1.50 38.1 900 2.00 50.8 300 1914 1.50 38.1 900 2.00 50.8 300

1916 1.50 38.1 1500 2.00 50.8 300 1916 1.50 38.1 1500 2.00 50.8 300

1918 1.50 38.1 2500 3.00 76.2 300 1918 1.50 38.1 2500 3.00 76.2 300

1920 1.00 25.4 300 2.00 50.8 150 1920 1.00 25.4 300 2.00 50.8 150

1922 1.00 25.4 600 2.00 50.8 150 1922 1.00 25.4 600 2.00 50.8 150

1924 1.50 38.1 900 2.00 50.8 300 1924 1.50 38.1 900 2.00 50.8 300

1926 1.50 38.1 1500 2.00 50.8 300 1926 1.50 38.1 1500 2.00 50.8 300

1928 1.50 38.1 2500 3.00 76.2 300 1928 1.50 38.1 2500 3.00 76.2 300

Standard Valve Connection - F Orifice Standard Valve Connection - G Orifice

API ASME API ASME

in 2 0.307 in 2 0.357 Orifice in 2 0.503 in 2 0.585

Orifice
Area Area cm 2 3.245 cm 2 3.774
cm 2 1.981 cm 2 2.302

Inlet Outlet Inlet Outlet

Valve Valve Size ASME Size ASME
Size ASME Size ASME
Type Type Std. Std.
Std. Std.
in. mm Class in. mm Class in. mm Class in. mm Class

1905 1.50 38.1 150 2.00 50.8 150 1905 1.50 38.1 150 3.00 76.2 150

1906 1.50 38.1 300 2.00 50.8 150 1906 1.50 38.1 300 3.00 76.2 150

1910 1.50 38.1 300 2.00 50.8 150 1910 1.50 38.1 300 3.00 76.2 150

1912 1.50 38.1 600 2.00 50.8 150 1912 1.50 38.1 600 3.00 76.2 150

1914 1.50 38.1 900 3.00 76.2 300 1914 1.50 38.1 900 3.00 76.2 300

1916 1.50 38.1 1500 3.00 76.2 300 1916 2.00 50.8 1500 3.00 76.2 300

1918 1.50 38.1 2500 3.00 76.2 300 1918 2.00 50.8 2500 3.00 76.2 300

1920 1.50 38.1 300 2.00 50.8 150 1920 1.50 38.1 300 3.00 76.2 150

1922 1.50 38.1 600 2.00 50.8 150 1922 1.50 38.1 600 3.00 76.2 150

1924 1.50 38.1 900 3.00 76.2 300 1924 1.50 38.1 900 3.00 76.2 300

1926 1.50 38.1 1500 3.00 76.2 300 1926 2.00 50.8 1500 3.00 76.2 300

1928 1.50 38.1 2500 3.00 76.2 300 1928 2.00 50.8 2500 3.00 76.2 300

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 3
 Scope of Design
1900/1900 DM Series Overview

Standard Valve Connection - H Orifice Standard Valve Connection - J Orifice

API ASME API ASME

Orifice in 2 0.785 in 2 0.913 Orifice in 2 1.287 in 2 1.496

Area cm 2 5.065 cm 2 5.888 Area cm 2 8.303 cm 2 9.652

Inlet Outlet Inlet Outlet

Valve Size ASME Size ASME Valve Size ASME Size ASME
Type Std. Std. Type Std. Std.
in. mm Class in. mm Class in. mm Class in. mm Class

1905 1.50 38.1 150 3.00 76.2 150 1905 2.00 50.8 150 3.00 76.2 150

1906 1.50 38.1 300 3.00 76.2 150 1906 2.00 50.8 300 3.00 76.2 150

1910 2.00 50.8 300 3.00 76.2 150 1910 3.00 76.2 300 4.00 101.6 150

1912 2.00 50.8 600 3.00 76.2 150 1912 3.00 76.2 600 4.00 101.6 150

1914 2.00 50.8 900 3.00 76.2 150 1914 3.00 76.2 900 4.00 101.6 150

1916 2.00 50.8 1500 3.00 76.2 300 1916 3.00 76.2 1500 4.00 101.6 300

1920 2.00 50.8 300 3.00 76.2 150 1920 3.00 76.2 300 4.00 101.6 150

1922 2.00 50.8 600 3.00 76.2 150 1922 3.00 76.2 600 4.00 101.6 150

1924 2.00 50.8 900 3.00 76.2 150 1924 3.00 76.2 900 4.00 101.6 150

1926 2.00 50.8 1500 3.00 76.2 300 1926 3.00 76.2 1500 4.00 101.6 300

Standard Valve Connection - K Orifice Standard Valve Connection - L Orifice

API ASME API ASME

Orifice in 2 1.838 in 2 2.138 Orifice in 2 2.853 in 2 3.317

Area cm 2 11.858 cm 2 13.794 Area cm 2 18.406 cm 2 21.400

Inlet Outlet Inlet Outlet

Valve Size ASME Size ASME Valve Size ASME Size ASME
Type Std. Std. Type Std. Std.
in. mm Class in. mm Class in. mm Class in. mm Class

1905 3.00 76.2 150 4.00 101.6 150 1905 3.00 76.2 150 4.00 101.6 150

1906 3.00 76.2 300 4.00 101.6 150 1906 3.00 76.2 300 4.00 101.6 150

1910 3.00 76.2 300 4.00 101.6 150 1910 4.00 101.6 300 6.00 152.4 150

1912 3.00 76.2 600 4.00 101.6 150 1912 4.00 101.6 600 6.00 152.4 150

1914 3.00 76.2 900 6.00 152.4 150 1914 4.00 101.6 900 6.00 152.4 150

1916 3.00 76.2 1500 6.00 152.4 300 1916 4.00 101.6 1500 6.00 152.4 150

1920 3.00 76.2 300 4.00 101.6 150 1920 4.00 101.6 300 6.00 152.4 150

1922 3.00 76.2 600 4.00 101.6 150 1922 4.00 101.6 600 6.00 152.4 150

1924 3.00 76.2 900 6.00 152.4 150 1924 4.00 101.6 900 6.00 152.4 150

1926 3.00 76.2 1500 6.00 152.4 300 1926 4.00 101.6 1500 6.00 152.4 150

4 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Scope of Design
1900/1900 DM Series Overview

Standard Valve Connection - M Orifice Standard Valve Connection - N Orifice

API ASME API ASME

Orifice in 2 3.600 in 2 4.186 Orifice in 2 4.340 in 2 5.047

Area cm 2 23.226 cm 2 27.006 Area cm 2 28.000 cm 2 32.561

Inlet Outlet Inlet Outlet

Valve Size ASME Size ASME Valve Size ASME Size ASME
Type Std. Std. Type Std. Std.
in. mm Class in. mm Class in. mm Class in. mm Class

1905 4.00 101.6 150 6.00 152.4 150 1905 4.00 101.6 150 6.00 152.4 150

1906 4.00 101.6 300 6.00 152.4 150 1906 4.00 101.6 300 6.00 152.4 150

1910 4.00 101.6 300 6.00 152.4 150 1910 4.00 101.6 300 6.00 152.4 150

1912 4.00 101.6 600 6.00 152.4 150 1912 4.00 101.6 600 6.00 152.4 150

1914 4.00 101.6 900 6.00 152.4 150 1914 4.00 101.6 900 6.00 152.4 150

1920 4.00 101.6 300 6.00 152.4 150 1920 4.00 101.6 300 6.00 152.4 150

1922 4.00 101.6 600 6.00 152.4 150 1922 4.00 101.6 600 6.00 152.4 150

1924 4.00 101.6 900 6.00 152.4 150 1924 4.00 101.6 900 6.00 152.4 150

Standard Valve Connection - P Orifice Standard Valve Connection - Q Orifice

API ASME API ASME

Orifice in 2 6.380 in 2 7.417 Orifice in 2 11.050 in 2 12.850

Area cm 2 41.161 cm 2 47.852 Area cm 2 71.290 cm 2 82.903

Inlet Outlet Inlet Outlet

Valve Size ASME Size ASME Valve Size ASME Size ASME
Type Std. Std. Type Std. Std.
in. mm Class in. mm Class in. mm Class in. mm Class

1905 4.00 101.6 150 6.00 152.4 150 1905 6.00 152.4 150 8.00 203.2 150

1906 4.00 101.6 300 6.00 152.4 150 1906 6.00 152.4 300 8.00 203.2 150

1910 4.00 101.6 300 6.00 152.4 150 1910 6.00 152.4 300 8.00 203.2 150

1912 4.00 101.6 600 6.00 152.4 150 1912 6.00 152.4 600 8.00 203.2 150

1914 4.00 101.6 900 6.00 152.4 150 1920 6.00 152.4 300 8.00 203.2 150

1920 4.00 101.6 300 6.00 152.4 150 1922 6.00 152.4 600 8.00 203.2 150

1923 4.00 101.6 600 6.00 152.4 150

1924 4.00 101.6 900 6.00 152.4 150

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 5
 Scope of Design
1900/1900 DM Series Overview
Standard Valve Connection - R Orifice Standard Valve Connection - T Orifice
API ASME API ASME

Orifice in 2 16.000 in 2 18.600 Orifice in 2 26.000 in 2 30.210

Area cm 2 103.226 cm 2 120.000 Area cm 2 167.742 cm 2 194.903

Inlet Outlet Inlet Outlet

Valve Size ASME Size ASME Valve Size ASME Size ASME
Type Std. Std. Type Std. Std.
in. mm Class in. mm Class in. mm Class in. mm Class

1905 6.00 152.4 150 8.00 203.2 150 1905 8.00 203.2 150 10.00 254.0 150

1906 6.00 152.4 300 8.00 203.2 150 1906 8.00 203.2 300 10.00 254.0 150

1910 6.00 152.4 300 10.00 254.0 150 1910 8.00 203.2 300 10.00 254.0 150

1912 6.00 152.4 600 10.00 254.0 150 1912 8.00 203.2 600 10.00 254.0 150

1920 6.00 152.4 300 8.00 203.2 150 1920 8.00 203.2 300 10.00 254.0 150

1922 6.00 152.4 600 10.00 254.0 150 1922 8.00 203.2 600 10.00 254.0 150

Standard Valve Connection - U Orifice Standard Valve Connection - V Orifice

API ASME API ASME

Orifice in 2 N/A in 2 35.099 Orifice in 2 N/A in 2 50.260

Area cm 2 N/A cm 2 226.445 Area cm 2 N/A cm 2 324.257

Inlet Outlet Inlet Outlet

Valve Size ASME Size ASME Valve Size ASME Size ASME
Type Std. Std. Type Std. Std.
in. mm Class in. mm Class in. mm Class in. mm Class

1905 8.00 203.2 150 10.00 254.0 150 1905 10.00 254.0 150 14.00 355.6 150

1906 8.00 203.2 300 10.00 254.0 150 1906 10.00 254.0 300 14.00 355.6 150

1910 8.00 203.2 300 10.00 254.0 150 1910 10.00 254.0 300 14.00 355.6 150

1920 8.00 203.2 300 10.00 254.0 150 1920 10.00 254.0 300 14.00 355.6 150

Standard Valve Connection - W Orifice

API ASME

Orifice in 2 N/A in 2 78.996

Area cm 2 N/A cm 2 509.651

Inlet Outlet
Valve Size ASME Size ASME
Type Std. Std.
in. mm Class in. mm Class

1905 12.00 304.8 150 16.00 406.4 150

1906 12.00 304.8 300 16.00 406.4 150

1910 12.00 304.8 300 16.00 406.4 150

1920 12.00 304.8 300 16.00 406.4 150

6 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Scope of Design
How Pressure Relief Valves Operate
All pressure relief valves operate by using inlet- act over a larger area, an additional force is
system pressure to overcome a spring load. As a available to overcome the spring force. By adjusting
result, the valve can relieve a defined capacity. the “adjusting ring”, the opening in the secondary
annular orifice can be altered, which controls
Closed
pressure build-up in chamber (B). This controlled
pressure build-up in chamber (B) will overcome the
spring force, causing the disc to move away from
Spring
the nozzle seat and the valve to “pop” open.

Fully Open
Disc

Secondary
Annular Orifice

When the valve is closed during normal operation

(see Figure Closed), the spring force resists the
Huddling
vessel pressure acting against the seating surfaces
Chamber
(area A). As vessel pressure increases, the pressure
at (A) tends to equalize the spring force and the Primary
Orifice
pressure holding the seats together approaches
zero.
Once the valve has opened, an additional pressure
Partially Open build-up occurs at (C) (see Figure Fully Open). This
is due to the sudden flow increase and the
Secondary restriction to flow through another annular orifice
Annular Orifice
formed between the inner edge of the disc holder
and the outside diameter of the adjusting ring.
These additional forces at (C) cause the disc to lift
Chamber B
substantially at “pop.”

Flow is restricted by the opening between the

nozzle seat and disc seat until the disc seat has
Disc Holder been lifted from the nozzle seat by approximately
Huddling one-quarter of the nozzle-throat diameter. After
Chamber
Adjusting the disc has attained this degree of lift, flow is
Ring
restricted by the primary orifice rather than by the
area between the seating surfaces.

Blowdown (the difference between opening and

In vapor or gas service the valve may “simmer”
closing pressure) can be controlled within limits by
before it will “pop.” When the vessel pressure
positioning the single adjusting ring. Blowdown is
increases to within one to two percent of the set
caused when the spring force is unable to
pressure, media will audibly move past the seating
overcome the summation of the forces at (A), (B),
surfaces into Chamber (B) Flow restriction in the
and (C) until the pressure at (A) drops below the
secondary annular orifice causes pressurecan now
set pressure.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 7
 Scope of Design
How Pressure Relief Valves Operate
Flow path of fluid through the valve

Spindle

Eductor
Tube

Guide

Disc Holder

Disc

Adjusting Ring

Adjusting Ring Pin

Secondary
Primary Orifice Annular Orifice

Inlet Neck

Nozzle Threads

Base

Note:
Above Figure reflects the flow path of fluid through the valve. It is significant to recognize that the system pressure
enters through the nozzle and remains at a high pressure until it expands through the secondary annular orifice.
Pressure downstream of the secondary annular orifice is much lower than the system pressure. The upper portion
of the valve base plus the outlet flange are of a lower pressure rating than the inlet side of the valve.
Blowdown settings: Production testing required by manufacturers of safety relief valves is governed by ASME
Section VIII, UG-136 (d), which does not require the setting of blowdown during production test. Adjusting rings on
the 1900 flanged safety relief valve series are factory adjusted to predetermined ring settings. This will provide a
consistent opening and closing pressure on the safety relief valve.

8 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Scope of Design
Product Features
Adjusting Ring Design Simplicity
The adjusting ring in the Consolidated safety Consolidated safety relief valves use a minimum
relief valve is preset to predetermined positions number of component parts, which results in a
before the valve is put into service. Presetting savings by minimizing spare parts inventory and
makes it less necessary to pop the valve in simplifying valve maintenance.
service in order to ascertain that the ring has
been set properly to achieve the necessary lift Maximum Seat Tightness
and relieving capacity. Seat finish in a safety relief valve is critically
important; otherwise, valve leakage can occur.
Simple Blowdown Adjustment Consolidated safety relief valve seats are
A single adjusting ring adjusts blowdown, or precision- machined and lapped, which promotes
reseating pressure, in the safety relief valve. When positive seating and prevents loss of contained
the ring is moved upward, blowdown is increased media.
(lowering the reseating pressure), and when it is The Thermodisc™ design offers a tighter closure
moved downward, the blowdown is decreased and compensates for temperature variations
(raising the reseating pressure). In comparison, around the periphery of the nozzle. Thermal
when valves have two or more adjusting rings, distortion, which produces seat leakage, is
each affects valve action as well as blowdown. minimized in steam service.

Minimum Guiding Area Cap and Lever Interchangeability

Guiding areas greater than those required to align Sometimes it may be necessary to change the
the seating surfaces are undesirable in a safety type of cap or lever in the field after a valve has
relief valve, especially for valves used in the process been installed. All Consolidated safety relief valves
industries. The smaller the valve’s guiding area are supplied so they can be converted to any
(when corrosion or contamination from the flowing type of lever or cap desired. It is not necessary to
medium builds up in the valve guiding surfaces) the remove the valve from the installation, and the set
less the tendency of the guiding area to stick and pressure will not be affected when making such a
hinder valve operation. change.
Nozzle
Valve Interchangeability
The nozzle is a pressure-containing component in
A Consolidated 1900 Series safety relief valve may
constant contact with the process media in both
be to converted to several variations such as
the open and closed valve positions. To promote
conventional to bellows, metal seat to soft seat,
reliability and safety, Consolidated flanged SRV
trim conversion to dual media (DM), gas (GS),
nozzles are constructed from forgings, investment
liquid (LA) or steam (TD), requiring a minimum
castings or centrifugal castings.
number of parts for lower cost of ownership.
Spindle Pocket Connection
Quality Material
The connection between the spindle and disc
All Consolidated safety relief valve castings and
holder in a Consolidated safety relief valve is a
forgings are made to ASTM and ASME
positive method of attachment. The Inconel snap
specifications and are subject to many rigid
ring and groove design make it virtually impossible
inspections. These rigorous processes, coupled
to remove the spindle from the disc holder,
with quality workmanship, promote a long,
unless the ring is compressed intentionally. This
trouble-free valve life.
design requires a minimum amount of effort to
disassemble during maintenance.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 9
 Scope of Design
Product Features
Reduction of Valve Bonnet Pressure
Closed bonnet valves are subject to variable pressure past the guiding surfaces when the valve is open. This
adds a variable force to that of the spring, which can affect valve performance. An eductor tube can help
reduce excess bonnet pressure and promote good valve opening and closing action.

The eductor tube reduces bonnet pressure by pulling discharging fluids out of the bonnet faster than the fluids
can enter past the guiding surfaces. Consequently, the tube acts as a siphon through the drawing effect of the
flow through the outlet side of the valve.

Eductor Tube Reduces Bonnet Pressure

During valve discharge, media flows through the clearance between the disc holder and guide, building up
bonnet pressure. This adds a variable force to the spring force, which inhibits valve lift. The eductor effect of the
medium flowing at high velocity through the valve outlet reduces bonnet pressure.
The greater lifting force (resulting from a reduction in bonnet pressure) introduces important advantages:

1. Uniform response to blowdown control adjustment

2. Positive, full-rated capacity at low overpressures

3. Better operation at higher back pressures with the eductor tube

4. Stability of valve lift and capacity during operation

5. When the valve opens, an increase in lifting force that breaks up slight corrosive deposits or surface
film accumulates on the guiding surfaces and hinders valve action. (For severe corrosion applications,
a bellows valve is recommended.)

Eductor Tube

Eductor Tube

10 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Scope of Design
1900 Dual Media (DM) Dual Certified Valves
The patented innovation of the Dual Media trim 3. The opening point of a liquid set standard
design makes it the first and only spring-loaded liquid certified valve relieving on gas may be as
safety relief valve in the industry that is “dual much as 5% lower. This can cause seat leakage
certified”, as defined by API Standard 520 Part 1, or premature valve opening when operating
10th Edition – Sizing and Selection. Dual Certified is pressures are higher and there is a gas relief
defined as pressure relief valves that are both vapor/ scenario occurring. Contrary, the opening point
gas flow certified, and liquid flow certified where of a gas set standard gas certified valve relieving
dual certification is achieved without making any on liquid may be as much as 5% higher and is
modifications or adjustments to the relief device likely to chatter. These shifts in opening points
when switching fluids during the flow testing. may result in a similar shift in the point at which
full lift is achieved.
The 1900 DM trim is engineered to perform on both
liquid and/or gas media and is Dual Certified to meet The DM trim provides exceptional set pressure
dual media (liquid and gas) nameplate capacity performance on gas and/or liquid, stable opening
stamping per ASME B&PVC Code Case 2787. and closing and industry leading blowdown
performance which ensures the system is efficiently
The 1900 DM trim is ideal for any liquid or gas
protected from an overpressure event with gas and/
application, two-phase liquid and gas, flashing or
or liquid as the relieving media.
multiple relief case scenarios.
With the 1900 DM trim’s fixed blowdown performance
Pressure relief valve sizing rules require that when
on liquid and on gas, it greatly reduces the loss of
selecting a valve, it is based on the worst-case
valuable process media, reduces fugitive emissions
overpressure scenario with the largest required area
and provides reliable process efficiency.
to relieve the required capacity. This can lead to
problematic and unstable relief scenarios such as: The 1900 DM builds on the reliability of the 1900 Series
and is offered in the same scope of inlet/outlet sizes,
1. Using a standard gas certified trim to flow
pressure classes, orifices designations and material
liquids creates chatter and damages valve
offerings.
components. This is not recommended.
2. Using a standard liquid certified trim to relieve
gas will extend the blowdown, typically in the
range of ~25-30%. This requires bringing system
pressures down as low as 70% of the valve set
pressure for the valve to close causing valuable
process media loss, increased fugitive emissions
and loss in efficiency.

Trim Performance Characteristics

Set Kd
Trim Certified Setting Relieving Blowdown
Pressure (Coefficient of
Type Media Media Media Performance
Performance Discharge)

Gas and Gas 0.950

1900 All Orifices Metal Seat (MS) <10%
Liquid per
Dual Media Air/Nitrogen All Orifices O-ring Seat (DA) <15%
ASME CC
Trim (DM) Liquid 0.744
2787 Within ASME
1900 B&PVC
Standard Gas Air/Nitrogen Gas Section VIII < 7% 0.950
Gas Trim (GS) Tolerances

Water Liquid < 12% 0.744

1900
Open up to 5%
Standard Liquid ~25-30%
low, Outside
Liquid Trim (LA) (Common for most 0.950
Water Gas ASME B&PVC
liquid certified PRVs (Not Certified)
Section VIII
relieving gases)
Tolerance

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 11
 Scope of Design
1900 Dual Media (DM) Dual Certified Valves
Design Options
The 1900 DM is offered with the same design options as the standard 1900 Series such as a bellows, balanced
piston, soft seat and special material variations.
In addition, the 1900/1900 DM has a patented Cryodisc design that provides superior seat tightness performance
in low temperature cryogenic applications.

Disc Design Availability

Disc Design

Standard Solid Disc

Valve Type
Liquid Organic Heat Vapor Organic Heat
Liquid Gas (1)
Transfer Media Transfer Media(1)

1900 DM X X X X

1900-30 DM X X X X

1900-35 DM X X X X

1. A standard solid disc in a special heat treated martensitic 616 stainless steel or Inconel X-750 is an option for
organic vapor, corrosive or NACE applications

Disc Design

Cryodisc
Valve Type
Cryogenic Cryogenic
Liquid (32°F and below) Gas (32°F and below)

1905-1912 X X

1905-1912
X X
(-30 Bellows)

1905-1912
X X
(-35 Balanced Piston)

1. Cryogenic disc is optional for L1 and L2 material variations and mandatory for the L3 material variation. The
standard cryogenic disc material is Inconel X-750 with Titanium Nitride coating.

12 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Scope of Design
1900/1900 Dual Media (DM) Cryodisc
Most PRV leakage in cryogenic applications is a result of dramatic thermal stresses in the seating components
which can rapidly lead to process waste and fugitive emissions:
Available for the 1900 liquid (LA) and gas (GS) trims and the Dual Media (DM) trim, the patented Cryodisc
technology offers enhanced seat tightness before and after a relief event. The low temperature media creates
thermal stresses in the material that deflect the patented disc thermolip downward creating uniform contact
pressure on the nozzle seat resulting in enhanced seat tightness. Titanium Nitride (TiN) coating, an extremely
hard ceramic material, is applied to the bearing surface prevent galling induced wear under extreme cryogenic
conditions.

1900 Dual Media (DM) High Pressure (Block Body)

The 1900 DM High Pressure design combines the technology of the Dual Certified 1900 DM with a forged Block
Body design to handle high pressure FPSO compression & auxiliary system applications.

Specifications
Orifices: D - J Orifices
Set Pressure: Up to 10,000 psig (689.5 barg)
Sizes: 1-13/16” x 3, 3 x 4
Inlet Connections: Studded API 6A 10/15K flanges with ring
joint nozzle, Grayloc™ and Techlok™
hubs available
Outlet Connection: Studded ASME Class 300
Body/Bonnet: Duplex (F51, F53, F55), F65 (non-code)
alloy, SA182 F316 SS, SA105 CS, SA350 LF2
CS
Trim: Nozzle/Disc - Inconel 718 is standard,
F51/55 duplex materials with Stellite
hard-facing is optional
Spring Material: Inconel X-750
Seat Design: Metal seat design only

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 13
 Scope of Design
1900 Steam Trim (TD) Valves
The 1900 TD is specifically configured for steam The martensitic stainless steel disc construction
service and organic heat-transfer media. It is promotes high strength and toughness. As the valve
certified to ASME Code Section Vlll. set point is approached, the pressure-sealing effect
of the Thermodisc assists in the tightness of the seat
The Thermodisc is a specifically configured disc for
as does the rapid thermal equalization that occurs
use with high-temperature fluids. The Thermodisc
due to the thin-sealing section.
concept has consistently contributed to valve
tightness during more than 40 years of field-proven
performance.

Steam Trim Internals

Disc Holder

Retainer Ring

Thermodisc

Adjusting
Ring

Nozzle

1900 Disc Design Availability

Disc Design

Standard Solid Disc Thermodisc 1

Valve
Vapor Liquid Vapor
Type Liquid
Organic Organic Organic
Organic Heat
Steam Liquid Heat Vapor Steam Liquid Heat Heat Vapor
Transfer
Transfer Transfer Transfer
Media
Media Media Media

1900 Conventional - X X X X X - - X -

1900-30 Balanced Bellows - X X X X X - - X -

1900-35 Balanced Piston - X X X X X - - X -

1. Thermodisc standard material is a specially heat treated martensitic 616 stainless steel. It is also available in Inconel X-750
material. The Thermodisc design is not available for the 1900 DM.

14 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Scope of Design
1900 Liquid Trim (LA & LA1) Valves
The 1900 uses the same Liquid Trim for applications Liquid applications are defined as:
that require ASME B and PVC, Section I and Section VII
1. The fluid remains liquid while flowing through the
certifications.
valve
The Liquid Trim (LA1) is certified for all ASME B and PVC
2. Flowing fluid flashes going through the valve
Section I liquid economizer and thermal fluid heater
applications. 3. For ASME B and PVC, Section VIII, certified and
non- certified thermal-relief applications (thermal
The Liquid Trim (LA) is certified for all ASME B & PVC,
relief is to prevent excessive pressure caused by
Section VIII liquid applications.
thermal expASMEon of trapped liquids). The LA trim
offers blowdown performance with ranges from
7 percent to 12 percent below the set pressure.
This valuable feature offers media conservation,
a positive lift and smooth, chatter-free operation.
Because of the short blowdown performance of
this design, it is critical that the inlet connection
always supports a pressure drop of 3 percent or
less from the vessel to the valve as recommended
by API 520.
Conversion of existing 1900 Series valves to liquid trim
is available through the factory or your local
Green Tag™ Center.

LA/LA1 Trim Internals

Disc Holder
Single piece disc
holder for maximum
rigidity and part
integrity.
Disc Retainer

Disc

Adjusting Ring

Designed to provide high

Nozzle lift and capacity with stable
operation on liquid media.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 15
 Scope of Design
1900 Restricted Lift Valves
We offer the 1900 Series in orifice sizes ranging from reduction in rated capacity can be achieved by
the smallest “D” size to the largest “W” size. In order restricting the lift. A restricted lift pressure relief valve
to accomplish certain valve functions, some special has a reduced flow area (reduced effective orifice
considerations should be made as shown below with area), resulting in a lower rated capacity for the
the D and E orifice designs. valve. A lower rated capacity, based on the reduced
lift, will lower the inlet and outlet piping pressure
The D and E valves are restricted-lift versions of the
losses and reduce the acoustic effects.
“F” orifice valve. The lift is restricted by a limit washer
to provide the equivalent effective orifice area for a ASME B&PVC Section VIII, paragraph UG-136(a)
“D” or “E” orifice. (11) gives the requirements that must be met for
restricted lift applications which states valves shall
The standard 1900 Series valves are also available
not have their lifts restricted to a value less than
with restricted lifts in orifices ranging from “F” to “W”
30% of full rated lift, or 0.080 in. (2 mm). Paragraph
for compressible media only.
UG-133(h) states that when sizing and selecting
Restricted lift valves can provide solutions for valves, the restricted lift nameplate capacity shall
systems with inlet pressure losses greater than 3%, or be determined by multiplying the capacity at full
cases where valves may be oversized and exhibiting rated lift as defines in UG-131(e)(3) by the ratio of the
signs of chatter. restricted lift to the full rated lift.
API 526 Table 1 shows a 21% to 78% increase in Lift restriction is accomplished by installing a limit
effective orifice area from one selected orifice to washer between the guide and disc holder as
the next lettered orifice. In some applications, the shown in the figure. The limit washer is cut to the
user may require an orifice somewhere in between appropriate length based on the lift required.
so that the resulting rated capacity is lower. This

Restricted Lift

Conventional Balanced Bellows

Guide

Limit Washer
Limit Washer

Disc Holder

16 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Scope of Design
Soft Seat Applications
Operating and Set Pressures Foreign Matter and Slurry Service
Where the operating pressure is close to the set Many times, foreign material such as pipe scale,
pressure, seat tightness can be maintained at welding beads, sand and dust particles may
relatively higher operating pressures. damage the metal-to-metal seating surfaces in a
valve of this type when it is open and flowing.
Seats Positioned for Correct Alignment The Consolidated O-ring seat seal can absorb the
Mechanical vibration and pressure waves could lift impact of most foreign particles without damage.
the valve disc with each stroke and may cause flat
metal-to-metal seats to rub together and become Hot Water Boiler Service
damaged. When a safety relief valve opens, hot water flashes
The 45-degree metal-to-metal load-bearing seats into steam at the seating surfaces, and solid
in the Consolidated O-ring seat seal promote true particles that float to the water surface are driven
alignment aided by full system pressure behind against the seating surfaces at steam velocities.
the O-ring, which effectively seals against leakage. Consolidated O-ring seat seal valves can
withstand this type of service and remain tight to
Corrosive Services a greater degree than metal-to-metal seat valves.
In some services, seating surface corrosion is the Baker Hughes uses proven quality Teflon® O-ring
cause of valve leakage. In this type of service, seats for this service. In some pressure and
the Consolidated O-ring seat seal will protect temperature applications, Teflon is not resilient,
the metal seat on the nozzle against contact of and leakage may occur.
the corrosive fluid thereby maintaining greater
tightness. Benefits
Safety Relief Valve leakage that is aggravated
by any cause is usually costly. In many cases, an
expensive product is lost and maintenance costs
DA soft seats without bellows increase. Consolidated O-ring seat seal valves are
configured to eliminate leakage in troublesome
applications and reduce overall costs. Should
leakage occur, it is simpler and less expensive to
replace the O-ring than to maintain metal-to-
metal seats.

O-ring Conversion
1900 & 1900 DM Series metal-seated valves can be
converted to O-ring seat seals by installing a few
basic parts provided in a conversion kit.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 17
 Scope of Design
1900/1900 DM Soft Seat (DA) Option
The Double Seal Soft Seat
The double seal design incorporates the merits 1900/1900 DM Soft Seat (DA)
of both a soft seat and a metal seat design valve.
The 45-degree metal seat offers the load-bearing
surface to transmit spring force and the slotted
O-ring retainer allows O-ring pressurization to
accomplish the primary sealing function. This O-ring
seal design can be used throughout the full pressure
range of the valve. For pressure and temperature
ratings of the seal, refer to the O-ring Selection Table
in this section (pages 43 and 44).
Consolidated O-ring seat seal valves are bubble tight
at 95 percent of set pressures over 100 psig (6.89
barg).
The following table reflects the percent of set
pressure (popping pressure) at which the valve will
be bubble tight on air.

Bubble Tight Pressures

Set Pressure
Percent of Set
psig barg
Pressure
min. max. min. max.

5 30 0.34 2.07 90%

31 50 2.14 3.45 92%

51 100 3.52 6.89 94%

101 to max. rating 6.96 to max. rating

95%
of valve of valve

Consolidated O-ring seat seals provide positive

closure at service pressures, closer to the set
pressure than is possible with metal-to-metal seats.
This assures continuous, trouble-free service and
complete valve tightness after numerous “pops.”

Note:
The Consolidated 1900/1900 DM O-ring design
features a secondary metal-to-metal seat that
becomes effective if O-ring integrity is lost due to
external fire or other causes. The retainer is lapped
to the nozzle at assembly, assuring seat tightness.

18 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Scope of Design
Soft Seat (DA) Option - How the Double Seal Works
Two unique features distinguish the Consolidated O-ring Double Seal
seat seal safety valve from other designs. These are the
45-degree metal-to-metal load bearing seats and the
slotted O-ring retainer.

Three Essentials to a Tighter and More 45°

Secure Seat

1) Concentric Alignment
The nozzle bore and O-ring retainer are both
machined to an angle of 45 degrees. This ensures
that as the valve disc opens and closes, the O-ring
is aligned concentrically against the lip of the
nozzle. Close tolerance between the nozzle and the
body, or between the body and the disc guide and
disc holder, also help to ensure a tight seal when
the valve is closed. Accurate alignment coupled
with the load bearing function of the O-ring retainer
virtually eliminates O-ring abrasion from valve
action.

2) Maximum Sealing Force

On the back side of the O-ring retainer there are
two small slots. When the valve is closed, process
media enters between the machined seat of the
nozzle and the O-ring retainer and proceeds up the
slots behind the O-ring. This pressure forces the
O-ring against the lip of the nozzle and the curved
recess of the disc holder. As the pressure within the
valve rises to set point, the O-ring is pressed tightly
against the nozzle to maintain maximum sealing
force until break-away pressure is reached.

3) O-ring Retention
When the valve opens, the pressure behind the
O-ring escapes from the same two slots on the
O-ring retainer. This prevents the O-ring from being
ejected. Additionally, the O-ring encapsulating
retainer prevents the O-ring from being pulled
from its setting by the high velocity, low pressure
discharge inside the upper valve body.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 19
 Materials

1900/1900 DM Conventional Safety Relief Valve

19

21
20

27

17
11

15

18

13 41

17

14

16 12

10
9

7
40

20 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Materials
1900/1900 DM Materials of Construction - Conventional

Conventional D-U Orifices Conventional V and W Orifices

Part Conventional (Standard) Part Conventional (Standard)
Nomenclature Nomenclature
No. Valve Material (-00) No. Valve Material (-00)
1 Base 3 Adjusting Ring 410 Stainless Steel
(1905-1918) ASME SA216 WCC Carbon Steel 8 Disc Holder
(1920-1928) ASME SA217 WC6 Alloy Steel
(1905-1910) 316 Stainless Steel
1A Base Plug
(1905-1918) Carbon Steel 316 Stainless Steel
(1920)
(Boronized)
(1920-1928) 316 Stainless Steel
2 Nozzle(2) 316 Stainless Steel 9 Guide
3 Adjusting Ring 316 Stainless Steel (1905-1910) 410 Stainless Steel
4 Adjusting Ring Pin 316 Stainless Steel 316 Stainless Steel
5 Adjusting Ring Pin Gasket Soft Iron (1920)
(Boronized)
6 Disc 36 Drop Lever Carbon Steel
Solid Metal Flat Seat 316 Stainless Steel
Guide Rings
Thermodisc 616 Stainless Steel 48 Teflon
(Not Shown)
7 Disc Retainer Inconel X-750
Disc Retainer Screw
8 Disc Holder 316 Stainless Steel 49 316 Stainless Steel
(Not Shown)
9 Guide 316 Stainless Steel
Retainer Screw
10 Guide Gasket Soft Iron
50 Locknut 316 Stainless Steel
11 Bonnet ASME SA216 WCC Carbon Steel (Not Shown)
12 Bonnet Gasket Soft Iron
Compression
13 Base Stud ASME SA193 B7 Alloy Steel 51 616 Stainless Steel
Screw (Not Shown)
14 Stud Nut ASME SA194 2H Carbon Steel
Compression
15 Spindle 410 Stainless Steel Screw Locknut
16 Spindle Retainer Inconel X-750 52 Soft Iron
Gasket
17 Spring Washer Carbon Steel (Not Shown)
18 Spring Spring Plunger
53 616 Stainless Steel
(-450° to -76°F) 316 Stainless Steel (Not Shown)
(-75° to 800°F) Alloy Steel Plunger Rings
Teflon
(801° to 1000°F) Tungsten Steel or Inconel X-750 (Not Shown)
19 Adjusting Screw 416 Stainless Steel
1. With Flexible Graphite Fillers (Spiral Wound).
20 Adjusting Screw Nut 416 Stainless Steel
21 Screwed Cap Carbon Steel 2. 1900 DM - Nozzle material for the 1918/28 orifices D-G
will be Inconel X-750. Other materials are available
22 Bolted Cap Carbon Steel depending on P/T.
23 Packed Cap Carbon Steel
24 Plain Cap Malleable Iron
25 Cap Bolt Carbon Steel
26 Cap Set Screw Carbon Steel
27 Cap Gasket Soft Iron
28 Release Nut Carbon Steel
29 Release Locknut Carbon Steel
30 Lever (Packed and Plain) Malleable Iron
31 Lifting Fork Malleable Iron
32 Lever Shaft 410/416 Stainless Steel
33 Packing 316 Stainless Steel(1)
34 Packing Nut 410/416 Stainless Steel
35 Top Lever Malleable Iron
36 Drop Lever Malleable Iron
37 Gag Carbon Steel
38 Sealing Plug Carbon Steel
39 Sealing Plug Gasket Soft Iron
40 Eductor Tube 316 Stainless Steel
41 Bonnet Plug Carbon Steel
42 Limit Washer (D-2 and E-2) 316 Stainless Steel

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 21
 Materials
1900/1900 DM Balanced Bellows Safety Relief Valve

19
21

20

27

17
11

15

18

Vent,
Do Not Plug

17 13

14

12
16
10

7 43

6 44

4 3

22 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Materials
1900/1900 DM Materials of Construction -
Balanced Bellows
Bellows (D - U Orifices) Bellows (V and W Orifices)
Part Part Bellows Valve Material
Nomenclature Bellows Valve Material (-30) Nomenclature
No. No. (-30)
1 Base 3 Adjusting Ring 410 Stainless Steel
(1905-1918) ASME SA216 WCC Carbon Steel 8 Disc Holder
(1920-1928) ASME SA217 WC6 Alloy Steel (1905-1910) 316 Stainless Steel
1A Base Plug 316 Stainless Steel
(1920)
(1905-1918) Carbon Steel (Boronized)
(1920-1928) 316 Stainless Steel 9 Guide
2 Nozzle(2) 316 Stainless Steel (1905-1910) 410 Stainless Steel
3 Adjusting Ring 316 Stainless Steel 316 Stainless Steel
(1920)
4 Adjusting Ring Pin 316 Stainless Steel (Boronized)
5 Adjusting Ring Pin Gasket Soft Iron Compression Screw
20 416 Stainless Steel
Nut
6 Disc
36 Drop Lever Carbon Steel
Solid Metal Flat Seat 316 Stainless Steel
Bellows Bolts
Thermodisc 616 Stainless Steel 45 ASME SA193 B7 Alloy Steel
(Not Shown)
7 Disc Retainer Inconel X-750
8 Disc Holder 316 Stainless Steel Bellows Bolts Lock
46 316 Stainless Steel
Washers (Not Shown)
9 Guide 316 Stainless Steel
10 Guide Gasket Soft Iron Overlift Restrictor
47 410 Stainless Steel
11 Bonnet ASME SA216 WCC Carbon Steel (Not Shown)
12 Bonnet Gasket Soft Iron
Guide Rings
13 Base Stud ASME SA193 B7 Alloy Steel 48 Teflon
(Not Shown)
14 Stud Nut ASME SA194 2H Carbon Steel
15 Spindle 410 Stainless Steel Disc Retainer Screw
49 316 Stainless Steel
16 Spindle Retainer Inconel X-750 (Not Shown)
17 Spring Washer Carbon Steel
Retainer Screw
18 Spring 50 316 Stainless Steel
Locknut (Not Shown)
(-450° to -76°F) 316 Stainless Steel
(-75° to 800°F) Alloy Steel Compression Screw
51 616 Stainless Steel
(801° to 1000°F) Tungsten Steel or Inconel X-750 (Not Shown)
19 Adjusting Screw 416 Stainless Steel Compression Screw
20 Adjusting Screw Nut 416 Stainless Steel 52 Locknut Gasket Soft Iron
21 Screwed Cap Carbon Steel (Not Shown)
22 Bolted Cap Carbon Steel Spring Plunger
53 616 Stainless Steel
23 Packed Cap Carbon Steel (Not Shown)
24 Plain Cap Malleable Iron
Plunger Rings
25 Cap Bolt Carbon Steel Teflon
(Not Shown)
26 Cap Set Screw Carbon Steel
27 Cap Gasket Soft Iron 1. With Flexible Graphite Fillers (Spiral Wound).
28 Release Nut Carbon Steel 2. 1900 DM - Nozzle material for the 1918/28 orifices D-G
29 Release Locknut Carbon Steel will be Inconel X-750. Other materials are available
30 Lever (Packed and Plain) Malleable Iron depending on P/T.
31 Lifting Fork Malleable Iron
32 Lever Shaft 410/416 Stainless Steel
33 Packing 316 Stainless Steel(1)
34 Packing Nut 410/416 Stainless Steel
35 Top Lever Malleable Iron
36 Drop Lever Malleable Iron
37 Gag Carbon Steel
38 Sealing Plug Carbon Steel
39 Sealing Plug Gasket Soft Iron
42 Limit Washer (D-2 and E-2) 316 Stainless Steel
43 Bellows Inconel 625 LCF
43 Bellows Nut 316L Stainless Steel
43 Bellows Flange 316L Stainless Steel
44 Bellows Gasket Soft Iron

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 23
 Materials
1900/1900 DM Balanced Piston Safety Relief Valve

21

19

27

27
11

17

18

15

17

13
16

14 67

68 12

63 62

8 66 65

9
10

7
43

44
5

4 3

24 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Materials
1900/1900 DM Materials of Construction - Balanced Piston

Balanced Bellows Balanced Bellows

Part Balanced Piston Valve Part Balanced Piston Valve

Nomenclature Nomenclature
No. Material (-35) (1) No. Material (-35) (1)

1 Base 24 Plain Cap Malleable Iron

ASME SA216 WCC Carbon 25 Cap Bolt Carbon Steel
(1905-1918)
Steel
(1920-1928) ASME SA217 WC6 Alloy Steel 26 Cap Set Screw Carbon Steel

1A Base Plug 27 Cap Gasket Soft Iron

(1905-1918) Carbon Steel 28 Release Nut Carbon Steel

(1920-1928) 316 Stainless Steel 29 Release Locknut Carbon Steel

2 Nozzle(3) 316 Stainless Steel 30 Lever Malleable Iron

3 Adjusting Ring 316 Stainless Steel 31 Lifting Fork Malleable Iron

4 Adjusting Ring Pin 316 Stainless Steel 32 Lever Shaft 410/416 Stainless Steel

5 Adjusting Ring Pin Gasket Soft Iron 33 Packing 316 Stainless Steel(2)

6 Disc 34 Packing Nut 410/416 Stainless Steel

Solid Metal Flat Seat 316 Stainless Steel 35 Top Lever Malleable Iron

Thermodisc 616 Stainless Steel 36 Drop Lever Malleable Iron

7 Disc Retainer Inconel X-750 37 Gag Carbon Steel

8 Disc Holder 316 Stainless Steel 38 Sealing Plug Carbon Steel

9 Guide 316 Stainless Steel 39 Sealing Plug Gasket Soft Iron

10 Guide Gasket Soft Iron 42 Limit Washer (D-2 and E-2) 316 Stainless Steel
ASME SA216 WCC 43 Bellows Inconel 625 LCF
11 Bonnet
Carbon Steel
12 Bonnet Gasket Soft Iron 43 Bellows Nut 316L Stainless Steel

13 Base Stud ASME SA193 B7 Alloy Steel 43 Bellows Flange 316L Stainless Steel

ASME SA194 2H 44 Bellows Gasket Soft Iron

14 Stud Nut
Carbon Steel
62 Piston 304 Stainless Steel
15 Spindle 410 Stainless Steel
63 Piston Guide 316 Stainless Steel
16 Spindle Retainer Inconel X-750
Piston Retainer Ring
17 Spring Washer Carbon Steel 64 Inconel X-750
(D-F only) (Not Shown)
18 Spring 65 Seal Ring Graphitar Grade 67
(-450° to -76°F) 316 Stainless Steel 66 Seal Ring Expander 410 Stainless Steel
(-75° to 800°F) Alloy Steel 67 Piston Lock Screw 18-8 Stainless Steel
Tungsten Steel or
(801° to 1000°F) 68 Piston Guide lock Screw 18-8 Stainless Steel
Inconel X-750
19 Adjusting Screw 416 Stainless Steel Piston Plate (D-F only)
69 316 Stainless Steel
(Not Shown)
20 Adjusting Screw Nut 416 Stainless Steel
1. Other material variations are available. Balanced piston
21 Screwed Cap Carbon Steel
components will be per the bellows “-30” type, except in “X3” and
22 Bolted Cap Carbon Steel “X4” variations. (S3, S4, etc.). In these cases, the materials for the
piston, lock screws, seal ring expander, and piston guide may be
23 Packed Cap Carbon Steel
changed. The Seal Ring will remain as Graphitar Grade 67.

2. With Flexible Graphite Fillers (Spiral Wound).

3. 1900 DM - Nozzle material for the 1918/28 orifices D-G will be Inconel
X-750. Other materials are available depending on P/T.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 25
 Materials
1900/1900 DM Soft Seat (DA) Option Safety Relief Valve

Disc Holder

Retainer Lock Screw

O-ring Seat Seal

O-ring Retainer

Nozzle

D Thru J Orifice

Disc Holder

Disc Retainer

Disc

Retainer Lock Screw

O-ring Seat Seal

O-ring Retainer

Nozzle

K Thru T Orifice

Standard Material for 1900/1900 DM Soft Seat (DA)

Safety Relief Valves
Part Name Materials (1)

Disc (K-T Orifice) 316 Stainless Steel

Disc Holder(2) 316 Stainless Steel

Bonnet ASME SA352 LCC CS

Disc Retainer Inconel X750

O-ring Retainer(3) 316 Stainless Steel

Retainer Lock Screw (3)

316 Stainless Steel
(Not Shown)

O-ring Seat Seal Select(4)

1. Balance of materials is the same as 1900/1900 DM standard construction

2. Disc Holder material for D-J orifice, will be Monel for “M” variations and Hastelloy C for “H” variations.

3. O-ring Retainer material will be Monel for “M” variations and Hastelloy C for “H” variations. The retainer lock screw will be Monel with
Nylon locking feature in the “M” variations and Hastelloy C with Nylon locking feature in the “H” variations.

4. Refer to pages 43 and 44 for O-ring Selection (Durometer and Temperature Limits).

26 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Materials
1900 Steam Trim (TD) Option Safety Relief Valve

Guide

Disc Holder

Disc Retainer

Thermodisc

Nozzle
Adjusting Ring

Standard Material for 1900 Steam Trim

(TD) Safety Relief Valves
Part Name Materials (1)

Nozzle 316 Stainless Steel

Thermodisc 616 Stainless Steel

Disc Retainer Inconel X750

Disc Holder 316 Stainless Steel

Guide 316 Stainless Steel

Adjusting Ring 316 Stainless Steel

1. Balance of materials same as 1900 standard construction.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 27
 Materials
1900 Liquid Trim (LA & LA1) Option Safety Relief Valve

Disc Holder

Disc Retainer

Disc

Adjusting Ring

Nozzle

Standard Material for 1900 Liquid Trim

(LA & LA1) Safety Relief Valves
Part Name Materials (1)

Nozzle 316 Stainless Steel

Disc 316 Stainless Steel

Disc Retainer Inconel X750

Disc Holder 316 Stainless Steel

Guide 316 Stainless Steel

Adjusting Ring 316 Stainless Steel

1. Balance of materials same as 1900 standard construction.

28 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Materials
1900/1900 DM Special Material and Service Options

The 1900/1900 DM Flanged Series offers various material options to satisfy customer needs and API standards.
The most common options are listed in this section.
These material options are not the only available options however. Ask Baker Hughes for options not listed here.
Specify the material construction classification using the construction variations such as: S2, H4, etc.

Options included are: Page

Number
• NACE Service (N1 and N2) 30

• Hydrofluoric Acid Service (HA) 32

• Stainless Steel (S2, S3 and S4) 33

• Alloy 20 (A1, A2, A3 and A4) 35

• Monel (M1, M1½(MB), M2, M3 and M4) 36

• Hastelloy C (H1, H2, H3 and H4) 37

• Duplex (D1, D2, D3 and D4) 38

• Low Temperature - Process Fluid (L1, L2, and L3) (For media temperatures to -450°F or -268°C) 40

• Low Temperature - Ambient (C1 and C2) (For ambient temperatures to -50°F or -45.6°C) 41

• High Temperature (T1 and T2) (For media temperatures to 1500°F or 816°C) 42

• Lethal Service 43

• O-ring Selection 44

Many other special options not necessarily of a material nature are available. These include, but are not limited
to, special facings on connections or special connections. Contact the factory for any special requirements you
may have.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 29
 Materials
NACE Trims

Materials for NACE

Construction Variation

Component Conventional Valves Bellows Valves

N1 N2 N1 N2
Base (1905-1918), Bonnet ASME SA216 WCC CS ASME SA351 CF8M SS ASME SA216 WCC CS ASME SA351 CF8M SS
Base (1920-1928) ASME SA217 WC6 AS ASME SA351 CF8M SS ASME SA217 WC6 AS ASME SA351 CF8M SS
Base Plug (1905-1918) Carbon Steel 316 Stainless Steel Carbon Steel 316 Stainless Steel
Base Plug (1920-1928), Nozzle(6) 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Adjusting Ring, Adjusting Ring Pin 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Adjusting Ring Pin Gasket Soft Iron Monel Soft Iron Monel
Disc - Solid Metal Flat Seat, Disc Holder 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Disc - Thermodisc, Disc Retainer Inconel X-750 Inconel X-750 Inconel X-750 Inconel X-750
Guide, Limit Washer (D-2 and E-2) 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Guide Gasket, Bonnet Gasket Soft Iron Monel Soft Iron Monel
Base Stud ASME SA193 B7 AS ASME SA193 B8M SS ASME SA193 B7 AS ASME SA193 B8M SS
Stud Nut ASME SA194 2H CS ASME SA194 8M SS ASME SA194 2H CS ASME SA194 8M SS
Spindle 316 Stainless Steel 316 Stainless Steel 410 Stainless Steel 316 Stainless Steel
Spindle Retainer Inconel X-750 Inconel X-750 Inconel X-750 Inconel X-750
Spring Washer 316 Stainless Steel 316 Stainless Steel Carbon Steel 316 Stainless Steel
Spring Inconel X-750 Inconel X-750 Alloy Steel 316 Stainless Steel
Adjusting Screw, Adjusting Screw Nut 316 Stainless Steel 316 Stainless Steel 416 Stainless Steel 316 Stainless Steel
Screwed Cap, Bolted Cap, Gag Carbon Steel 316 Stainless Steel Carbon Steel 316 Stainless Steel
Packed Cap, Cap Bolt Carbon Steel 316 Stainless Steel Carbon Steel 316 Stainless Steel
Plain Cap, Lever, Lifting Fork Malleable Iron Malleable Iron Malleable Iron Malleable Iron
Carbon Steel, Carbon Steel,
Cap Set Screw, Sealing Plug Carbon Steel Carbon Steel
316 Stainless Steel 316 Stainless Steel
Cap Gasket, Sealing Plug Gasket Soft Iron Monel Soft Iron Monel
Release Nut, Release Locknut Carbon Steel 316 Stainless Steel Carbon Steel 316 Stainless Steel
Lever Shaft, Packing Nut 410/416 Stainless Steel 316 Stainless Steel 410/416 Stainless Steel 316 Stainless Steel
Packing 316 Stainless Steel(5) 316 Stainless Steel(5) 316 Stainless Steel(5) 316 Stainless Steel(5)
Top Lever, Drop Lever Malleable Iron Malleable Iron Malleable Iron Malleable Iron
Eductor Tube 316 Stainless Steel 316 Stainless Steel Not Applicable Not Applicable
Bonnet Plug Carbon Steel 316 Stainless Steel Not Applicable Not Applicable
Bellows Not Applicable Not Applicable Inconel 625 LCF(4) Inconel 625 LCF(4)
Bellows Nut, Bellows Flange Not Applicable Not Applicable 316L Stainless Steel 316L Stainless Steel
Bellows Gasket Not Applicable Not Applicable Soft Iron Monel

1. The materials in red denote variation from standard material construction.

2. Compliance to NACE MR0175 requires media and materials evaluation. Please contact factory sales.

3. N1 and N2 valves are for installations for compliance to NACE MR0103-2015 and prior editions.

4. Heat treated.

5. With Flexible Graphite Fillers (Spiral Wound).

6. 1900 DM - Nozzle material for the 1918/28 orifices D-G will be Inconel X-750. Other materials are available depending on P/T.

30 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

Materials
Hydrofluoric Acid (HA) Service
To meet the demanding requirements of extremely corrosive confused with the M1-through-M4 materials used for other
HF Alky service, Baker Hughes has, in conjunction with corrosive applications.
major designers and users in this industry, developed the
In addition to the special stress-relieved conditioned Monel
HA variation. Extensive use of Monel Alloy 400, in the stress-
400 materials, a bellows seal and litharged-cured soft
relieved condition for critical components, has been utilized for
seat have been incorporated into this option. Long-term
this option.
applications have shown excellent results in the most severe,
NACE document 5A171 states, “In practice, occurrence of moist, aerated HF Alky service.
stress corrosion cracking may either be avoided by complete
exclusion of oxygen or may be minimized by stress-relieving
welded or cold formed parts.” The HA materials should not be

Special Materials, Hydrofluoric Acid Service (HA)(1) & (2) Special Materials, Hydrofluoric Acid Service (HA)(1) & (2)
Component Bellows Valve Material (-30) Component Bellows Valve Material (-30)

Base (1905-1918) ASME SA216 WCC CS(3) Plain Cap Malleable Iron

Base Plug (1905-1918) Carbon Steel Cap Bolt Carbon Steel

Nozzle Monel 400(4) Cap Set Screw Carbon Steel

Adjusting Ring Monel 400 Cap Gasket Monel 400

Adjusting Ring Pin Monel 400 Release Nut Carbon Steel

Adjusting Ring Pin Gasket Monel 400 Release Locknut Carbon Steel

Disc - Solid Metal Flat Seat Monel 400(4) Lever Malleable Iron

Disc Retainer Inconel X-750 Lifting Fork Malleable Iron

Disc Holder Monel 400(4) Lever Shaft 410 Stainless Steel

Guide Monel 400 Packing 316 Stainless Steel(5)

Guide Gasket Monel 400 Packing Nut 410 Stainless Steel

Bonnet ASME SA216 WCC CS Top Lever Malleable Iron

Bonnet Gasket Monel 400 Drop Lever Malleable Iron

Base Stud ASTM F468 Nickel Alloy 500 Gag Carbon Steel

Stud Nut ASTM F467 Nickel Alloy 500 Sealing Plug Carbon Steel

Spindle Monel 400 Sealing Plug Gasket Monel 400

Spindle Retainer Inconel X-750 Limit Washer (D-2 and E-2) Monel 400

Spring Washer Carbon Steel Bellows Monel 400(4)

Spring Carbon Steel (Nickel Plated) Bellows Nut Monel 400(4)

Adjusting Screw Monel 400 Bellows Flange Monel 400(4)

Adjusting Screw Nut Monel 400 Bellows Gasket Garlock Gylon 35101

Screwed Cap Carbon Steel O-ring Retainer Monel 400(4)

Bolted Cap Carbon Steel Retainer Lock Screw Monel 400 with Nylon Lock Feature

Packed Cap Carbon Steel O-ring Kalrez Spectrum 6375

1. The materials in red denote variation from standard material construction.

2. To specify valves, add material designation to the valve type, 1910L/HA or 1910-30L/HA.

3. (Including Supplement S5)

PWHT is required for weld repairs per ASTM A216 paragraph 10, or if C.E. is above 0.40. Carbon equivalent shall be determined per ASTM A216, S11.2. Weld PQR
shall include hardness test of PWHT area. Test piece to confirm that weld and weld heat-affected-zone hardnesses are 200 brinell maximum.

4. Stress relieved.

5. With Flexible Graphite Fillers (Spiral Wound).

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 31
 Materials
Corrosive Service
Corrosive Service, Stainless Steel Material (D-U Orifice)(1) & (2)
Construction Variation
Component
S2 S3 S4
Common Components (-00 and -30)
Base (1905-1918), Bonnet ASME SA216 WCC CS ASME SA351 CF8M SS ASME SA351 CF8M SS
Base (1920-1928) ASME SA217 WC6 AS ASME SA351 CF8M SS ASME SA351 CF8M SS
Base Plug (1905-1918), Release Nut,
Carbon Steel 316 Stainless Steel 316 Stainless Steel
Sealing Plug
Base Plug (1920-1928), Nozzle(5) 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Adjusting Ring, Adjusting Ring Pin 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Adjusting Ring Pin Gasket, Guide Gasket Monel Monel Monel
Disc - Solid Metal Flat Seat, Disc Holder 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Disc - Thermodisc 616 Stainless Steel 616 Stainless Steel 616 Stainless Steel
Disc Retainer, Spindle Retainer Inconel X-750 Inconel X-750 Inconel X-750
Guide, Limit Washer (D-2 and E-2) 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Base Stud ASME SA193 B7 AS ASME SA193 B8M SS ASME SA193 B8M SS
Stud Nut ASME SA194 2H CS ASME SA194 8M SS ASME SA194 8M SS
Spring Washer, Release Locknut Carbon Steel Carbon Steel 316 Stainless Steel
Spring (-20° to 800°F) Alloy Steel Alloy Steel 316 Stainless Steel
Spring (801° to 1000°F) Tungsten Steel(3) Tungsten Steel3 316 Stainless Steel
Screwed Cap, Bolted Cap, Packed Cap Carbon Steel 316 Stainless Steel 316 Stainless Steel
Plain Cap, Lifting Fork Malleable Iron 316 Stainless Steel 316 Stainless Steel
Cap Bolt Carbon Steel ASME SA193 B8M SS ASME SA193 B8M SS
Cap Set Screw Carbon Steel B8M Stainless Steel B8M Stainless Steel
Cap Gasket, Sealing Plug Gasket Monel Monel Monel
Lever, Top Lever, Drop Lever Malleable Iron Malleable Iron Malleable Iron
Lever Shaft, Packing Nut 410/416 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Packing 316 Stainless Steel4 316 Stainless Steel4 316 Stainless Steel4
Gag Carbon Steel Carbon Steel Carbon Steel
Conventional (Standard) Valve Components (-00)
Bonnet Gasket Monel Monel Monel
Spindle, Adjusting Screw 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Adjusting Screw Nut, Eductor Tube 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Bonnet Plug Carbon Steel 316 Stainless Steel 316 Stainless Steel
Bellows Valve Components (-30)
Bonnet Gasket Soft Iron Monel Monel
Spindle, Adjusting Screw 410 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Adjusting Screw Nut 416 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Bellows Inconel 625 LCF Inconel 625 LCF Inconel 625 LCF
Bellows Nut, Bellows Flange 316L Stainless Steel 316L Stainless Steel 316L Stainless Steel
Bellows Gasket Monel Monel Monel

1. The materials in red denote variation from standard material construction.

2. To specify valves, add material designation to the valve type, 1910L/S3 or 1910-30L/S3.

3. or Inconel X-750

4. With Flexible Graphite Fillers (Spiral Wound).

5. 1900 DM - Nozzle material for the 1918/28 orifices D-G will be Inconel X-750. Other materials are available depending on P/T.

32 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Materials
Corrosive Service
Corrosive Service, Stainless Steel Material (V and W Orifice)(1) & (2)
Construction Variation
Component
S2 S3 S4
Common Components (-00 and -30)
Base(1905-1910) ASME SA216 WCC CS ASME SA351 CF8M SS ASME SA351 CF8M SS
Base(1920-1928) ASME SA217 WC6 AS ASME SA351 CF8M SS ASME SA351 CF8M SS
Base Plug (1905-1910), Screwed Cap, Bolted Cap Carbon Steel 316 Stainless Steel 316 Stainless Steel
Packed Cap, Cap Set Screw, Release Nut Carbon Steel 316 Stainless Steel 316 Stainless Steel
Release Locknut, Sealing Plug Carbon Steel 316 Stainless Steel 316 Stainless Steel
Base Plug (1920-1928), Nozzle(4), Adjusting Ring 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Adjusting Ring Pin, Disc - Solid Metal Flat Seat 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Disc Retainer Screw, Retainer Screw Locknut 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Disc Holder - (1905-1910), Spindle 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Compression Screw Nut, Guide (1905-1910) 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Adjusting Ring Pin Gasket, Guide Gasket, Cap
Monel Monel Monel
Gasket
Compression Screw Locknut Gasket, Sealing
Monel Monel Monel
Plug Gasket
Disc - Thermodisc, Spring Plunger, Compression
616 Stainless Steel 616 Stainless Steel 616 Stainless Steel
Screw
316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Disc Holder (1920-1928), Guide (1920-1928)
(Boronized) (Boronized) (Boronized)
Bonnet ASME SA216 WCC CS ASME SA351 CF8M SS ASME SA351 CF8M SS
ASME SA193 B8M ASME SA193 B8M
Base Stud ASME SA193 B7 Alloy Steel
Alloy Steel Alloy Steel
ASME SA194 2H Carbon ASME SA194 8M ASME SA194 8M
Stud Nut
Steel Carbon Steel Carbon Steel
Spring Washer, Drop Lever, Gag Carbon Steel Carbon Steel Carbon Steel
Spring (-20° to 800°F) Alloy Steel Alloy Steel 316 Stainless Steel
Tungsten Steel or Inconel Tungsten Steel or Inconel
Spring (801° to 1000°F) 316 Stainless Steel
X-750 X-750
Plain Cap Malleable Iron 316 Stainless Steel 316 Stainless Steel
ASME SA193 B8M ASME SA193 B8M
Cap Bolt Carbon Steel
Alloy Steel Alloy Steel
Lever, Top Lever Malleable Iron Malleable Iron Malleable Iron
Lifting Fork Malleable Iron 316 Stainless Steel 316 Stainless Steel
Lever Shaft 410/416 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Packing 316 Stainless Steel(3) 316 Stainless Steel(3) 316 Stainless Steel(3)
Packing Nut 410/416 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Guide Rings (1905-1910),
Teflon Teflon Teflon
Plunger Rings (Not Shown)
Conventional (Standard) Valve Components (-00)
Bonnet Gasket Monel Monel Monel
Eductor Tube 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Bonnet Plug Carbon Steel 316 Stainless Steel 316 Stainless Steel
Bellows Valve Components (-30)
Bonnet Gasket Soft Iron Monel Monel
Limit Washer 410 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Bellows Inconel 625 LCF Inconel 625 LCF Inconel 625 LCF
Bellows Nut , Bellows Flange 316L Stainless Steel 316L Stainless Steel 316L Stainless Steel
Bellows Gasket Monel Monel Monel
ASME SA193 B8M ASME SA193 B8M
Bellows Bolts ASME SA193 B7 Alloy Steel
Alloy Steel Alloy Steel
Bellows Bolts Lock Washers 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Overlift Restrictor 410 Stainless Steel 410 Stainless Steel 410 Stainless Steel
1. The materials in red denote variation from standard material construction.
2. To specify valves, add material designation to the valve type, 1910L/S3 or 1910-30L/S3.
3. With Flexible Graphite Fillers (Spiral Wound).
4. 1900 DM - Nozzle material for the 1918/28 orifices D-G will be Inconel X-750. Other materials are available depending on P/T.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 33
Materials
Corrosive Service
Corrosive Service, Alloy 20 Material(1) & (2)
Construction Variation
Component
A1 A2 A3 A4
Common Components (-00 and -30)
Base (1905-1918) ASME SA216 WCC CS ASME SA216 WCC CS ASME SA351 CN7M AS ASME SA351 CN7M AS
Base (1920-1928) ASME SA217 WC6 AS ASME SA217 WC6 AS ASME SA351 CN7M AS ASME SA351 CN7M AS
Base Plug (1905-1918) Carbon Steel Carbon Steel Alloy 203 Alloy 20
Base Plug (1920-1928) 316 Stainless Steel 316 Stainless Steel Alloy 20 Alloy 20
Nozzle(6), Disc - Solid Metal Flat Seat Alloy 20 Alloy 20 Alloy 20 Alloy 20
Adjusting Ring, Adjusting Ring Pin 316 Stainless Steel Alloy 20 Alloy 20 Alloy 20
Adjusting Ring Pin Gasket Soft Iron Monel Monel Monel
Disc - Thermodisc, Disc Retainer Inconel X-750 Inconel X-750 Inconel X-750 Inconel X-750
Disc Holder 316 Stainless Steel Alloy 20 Alloy 20 Alloy 20
Guide Gasket Soft Iron Monel Monel Monel
Bonnet ASME SA216 WCC CS ASME SA216 WCC CS ASME SA351 CN7M AS ASME SA351 CN7M AS
Base Stud ASME SA193 B7 AS ASME SA193 B7 AS Alloy 20 Alloy 20
Stud Nut ASME SA194 2H CS ASME SA194 2H CS Alloy 20 Alloy 20
Spindle Retainer Inconel X-750 Inconel X-750 Inconel X-750 Inconel X-750
Spring Washer Carbon Steel Carbon Steel Carbon Steel Alloy 20
Spring (-20° to 800°F) Alloy Steel Alloy Steel Alloy Steel Alloy 20
Spring (801° to 1000°F) Tungsten Steel(4) Tungsten Steel(4) Tungsten Steel(4) Alloy 20
Packed Cap Carbon Steel Carbon Steel Alloy 20 Alloy 20
Plain Cap Malleable Iron Malleable Iron Not Applicable Not Applicable
Cap Bolt, Sealing Plug Carbon Steel Carbon Steel Alloy 20 Alloy 20
Cap Set Screw Carbon Steel Carbon Steel Not Applicable Not Applicable
Cap Gasket Soft Iron Monel Monel Monel
Release Nut, Release Locknut Carbon Steel Carbon Steel Carbon Steel Carbon Steel
Lever, Lifting Fork Malleable Iron Malleable Iron Malleable Iron Malleable Iron
410/416 Stainless 410/416 Stainless 410/416 Stainless 410/416 Stainless
Lever Shaft
Steel Steel Steel Steel
Packing 316 Stainless Steel(5) 316 Stainless Steel(5) 316 Stainless Steel(5) 316 Stainless Steel(5)
410/416 Stainless 410/416 Stainless 410/416 Stainless 410/416 Stainless
Packing Nut
Steel Steel Steel Steel
Top Lever, Drop Lever Malleable Iron Malleable Iron Not Applicable Not Applicable
Gag Carbon Steel Carbon Steel Carbon Steel Carbon Steel
Sealing Plug Gasket Soft Iron Monel Monel Monel
Conventional (Standard) Valve Components (-00)
Guide 316 Stainless Steel Alloy 20 Alloy 20 Alloy 20
Bonnet Gasket Soft Iron Monel Monel Monel
Spindle 410 Stainless Steel Alloy 20 Alloy 20 Alloy 20
Adjusting Screw, Adjusting Screw Nut 416 Stainless Steel Alloy 20 Alloy 20 Alloy 20
Screwed Cap, Bolted Cap, Bonnet
Carbon Steel Carbon Steel Alloy 20 Alloy 20
Plug
Eductor Tube 316 Stainless Steel 316 Stainless Steel Alloy 20 Alloy 20
Limit Washer (D-2 and E-2) 316 Stainless Steel Alloy 20 Alloy 20 Alloy 20
Bellows Valve Components (-30)
Guide 316 Stainless Steel 316 Stainless Steel Alloy 20 Alloy 20
Bonnet Gasket Soft Iron Soft Iron Monel Monel
Spindle 410 Stainless Steel 410 Stainless Steel Alloy 20 Alloy 20
Adjusting Screw, Adjusting Screw Nut 416 Stainless Steel 416 Stainless Steel Alloy 20 Alloy 20
Screwed Cap, Bolted Cap Carbon Steel Carbon Steel Carbon Steel Alloy 20
Limit Washer (D-2 and E-2) 316 Stainless Steel Alloy 20 Alloy 20 Alloy 20
Bellows Inconel 625 LCF Alloy 20 Alloy 20 Alloy 20
Bellows Nut, Bellows Flange 316L Stainless Steel Alloy 20 Alloy 20 Alloy 20
Bellows Gasket Soft Iron Monel Monel Monel

1. The materials in red denote variation from standard material 4. Or Inconel X-750.
construction. 5. With Flexible Graphite Fillers (Spiral Wound).
2. To specify valves, add material designation to the valve type, 6. 1900 DM - Nozzle material for the 1918/28 orifices D-G will be
1910L/A3 or 1910-30L/A3. Inconel X-750. Other materials are available depending on P/T.
3. Alloy 20 - ASTM B473 UNS N08020.

34 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Materials
Corrosive Service
Corrosive Service, Monel Material(1) & (2)
Construction Variation
Component
M1 MB (M 1½ ) M2 M3 M4
Common Components (-00 and -30)
ASME SA216 WCC ASME SA216 WCC ASME SA216 WCC ASME SA494 M35-1 ASME SA494 M35-1
Base (1905-1918)
CS CS CS NCA(3) NCA(3)
ASME SA217 WC6 ASME SA217 WC6 ASME SA217 WC6 ASME SA494 M35-1 ASME SA494 M35-1
Base (1920-1928)
AS AS AS NCA(3) NCA(3)
Base Plug (1905-1918) Carbon Steel Carbon Steel Carbon Steel Monel Monel
Base Plug (1920-1928) 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel Monel Monel
Nozzle(7) Monel Monel Monel Monel Monel
Adjusting Ring, Adjusting Ring Pin 316 Stainless Steel Monel Monel Monel Monel
Adjusting Ring Pin Gasket Soft Iron Monel Monel Monel Monel
Disc - Solid Metal Flat Seat Monel Monel Monel Monel Monel
Disc - Thermodisc, Disc Retainer Inconel X-750 Inconel X-750 Inconel X-750 Inconel X-750 Inconel X-750
Disc Holder 316 Stainless Steel Monel Monel Monel Monel
Guide 316 Stainless Steel 316 Stainless Steel Monel Monel Monel
Guide Gasket Soft Iron Monel Monel Monel Monel
ASME SA216 WCC ASME SA216 WCC ASME SA216 WCC ASME SA494 M35-1 ASME SA494 M35-1
Bonnet
CS CS CS NCA(3) NCA(3)
Base Stud ASME SA193 B7 AS ASME SA193 B7 AS ASME SA193 B7 AS Monel K500 Monel K500
Stud Nut ASME SA194 2H CS ASME SA194 2H CS ASME SA194 2H CS Monel K500 Monel K500
Spindle Retainer Inconel X-750 Inconel X-750 Inconel X-750 Inconel X-750 Inconel X-750
Spring Washer Carbon Steel Carbon Steel Carbon Steel Carbon Steel Monel
Spring (-450° to -21°F) Not Applicable Not Applicable Not Applicable 316 Stainless Steel Inconel X-750
Spring (-20° to 800°F) Alloy Steel Alloy Steel Alloy Steel Alloy Steel Not Applicable
Spring (801° to 1000°F) Tungsten Steel(4) Tungsten Steel(4) Tungsten Steel(4) Not Applicable Not Applicable
Adjusting Screw, Adjusting Screw Nut 416 Stainless Steel 416 Stainless Steel Monel Monel Monel
Screwed Cap, Bolted Cap Carbon Steel Carbon Steel Carbon Steel Monel Monel
Packed Cap, Sealing Plug Carbon Steel Carbon Steel Carbon Steel Monel Monel
Plain Cap Malleable Iron Malleable Iron Malleable Iron Not Applicable Not Applicable
Cap Bolt Carbon Steel Carbon Steel Carbon Steel Monel K500 Monel K500
Cap Set Screw Carbon Steel Carbon Steel Carbon Steel Not Applicable Not Applicable
Cap Gasket Soft Iron Monel Monel Monel Monel
Release Nut, Release Locknut Carbon Steel Carbon Steel Carbon Steel Monel Monel
Lever, Lifting Fork Malleable Iron Malleable Iron Malleable Iron Malleable Iron(5) Malleable Iron(5)
410/416 Stainless 410/416 Stainless 410/416 Stainless 410/416 Stainless 410/416 Stainless
Lever Shaft, Packing Nut
Steel Steel Steel Steel Steel
316 Stainless 316 Stainless 316 Stainless
Packing 316 Stainless Steel(6) 316 Stainless Steel(6)
Steel(6) Steel(6) Steel(6)
Top Lever, Drop Lever Malleable Iron Malleable Iron Malleable Iron Not Applicable Not Applicable
Gag Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
Sealing Plug Gasket Soft Iron Monel Monel Monel Monel
Limit Washer (D-2 and E-2) 316 Stainless Steel Monel Monel Monel Monel
Conventional (Standard) Valve Components (-00)
Bonnet Gasket Soft Iron Monel Monel Monel Monel
Spindle 410 Stainless Steel 410 Stainless Steel Monel Monel Monel
Eductor Tube 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel Monel Monel
Bonnet Plug Carbon Steel Carbon Steel Carbon Steel Monel Monel
Bellows Valve Components (-30)
Bonnet Gasket Soft Iron Soft Iron Soft Iron Monel Monel
Spindle 410 Stainless Steel 410 Stainless Steel 410 Stainless Steel Monel Monel
Bellows Inconel 625 LCF Inconel 625 LCF Monel Monel Monel
316L Stainless 316L Stainless
Bellows Nut, Bellows Flange Monel Monel Monel
Steel Steel
Bellows Gasket Soft Iron Monel Monel Monel Monel
1. The materials in red denote variation from standard material 5. Else Customer Specififed.
construction.
6. With Flexible Graphite Filler (Spiral Wound).
2. To specify valves, add material designation to the valve type, 1910L/
7. 1900 DM - Nozzle material for the 1918/28 orifices D-G will be Inconel
M3 or 1910-30L/M3.
X-750. Other materials are available depending on P/T
3. Nickel Copper Alloy (Per ASME Code Case 1750-22).
4. Or Inconel X-750.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 35
Materials
Corrosive Service
Corrosive Service, Hastelloy Material(1) & (2)
Construction Variation
Component
H1 H2 H3 H4
Common Components (-00 and -30)
Base (1905-1918) ASME SA216 WCC CS ASME SA216 WCC CS Nickel Alloy(3) Nickel Alloy(3)
Base (1920-1928) ASME SA217 WC6 AS ASME SA217 WC6 AS Nickel Alloy(3) Nickel Alloy(3)
Base Plug (1905-1918), Cap Bolt Carbon Steel Carbon Steel Hastelloy C Hastelloy C
Base Plug (1920-1928) 316 Stainless Steel 316 Stainless Steel Hastelloy C Hastelloy C
Nozzle(7), Disc - Solid Metal Flat Seat Hastelloy C Hastelloy C Hastelloy C Hastelloy C
Adjusting Ring, Adjusting Ring Pin 316 Stainless Steel Hastelloy C Hastelloy C Hastelloy C
Adjusting Ring Pin Gasket Soft Iron Monel Monel Monel
Disc - Thermodisc, Disc Retainer Inconel X-750 Inconel X-750 Inconel X-750 Inconel X-750
Disc Holder 316 Stainless Steel Hastelloy C Hastelloy C Hastelloy C
Guide Gasket Soft Iron Monel Monel Monel
Bonnet ASME SA216 WCC CS ASME SA216 WCC CS Nickel Alloy(2) Nickel Alloy(2)
Bonnet Gasket Soft Iron Monel Monel Monel
Base Stud ASME SA193 B7 AS ASME SA193 B7 AS Hastelloy C Hastelloy C
Stud Nut ASME SA194 2H CS ASME SA194 2H CS Hastelloy C Hastelloy C
Spindle Retainer Inconel X-750 Inconel X-750 Inconel X-750 Inconel X-750
Spring Washer Carbon Steel Carbon Steel Carbon Steel Hastelloy C
Spring (-450° to -76°F) 316 Stainless Steel Not Applicable Not Applicable Not Applicable
Spring (-75° to 800°F) Alloy Steel Alloy Steel Alloy Steel Hastelloy C
Spring (801° to 1000°F) Tungsten Steel(4) Tungsten Steel(4) Tungsten Steel(4) Hastelloy C
Screwed Cap, Bolted Cap, Carbon Steel Carbon Steel Hastelloy C Hastelloy C
Packed Cap, Sealing Plug Carbon Steel Carbon Steel Hastelloy C Hastelloy C
Plain Cap Malleable Iron Malleable Iron Not Applicable Not Applicable
Cap Set Screw Carbon Steel Carbon Steel Not Applicable Not Applicable
Cap Gasket Soft Iron Monel Monel Monel
Release Nut, Release Locknut, Gag Carbon Steel Carbon Steel Carbon Steel Carbon Steel
Lever Malleable Iron Malleable Iron Malleable Iron(5) Malleable Iron(5)
Lifting Fork, Top Lever, Drop Lever Malleable Iron Malleable Iron Malleable Iron Malleable Iron
Lever Shaft, Packing Nut 410/416 Stainless Steel 410/416 Stainless Steel 410/416 Stainless Steel 410/416 Stainless Steel
Packing 316 Stainless Steel(6) 316 Stainless Steel(6) 316 Stainless Steel(6) 316 Stainless Steel(6)
Sealing Plug Gasket Soft Iron Monel Monel Monel
Limit Washer (D-2 and E-2) 316 Stainless Steel Hastelloy C Hastelloy C Hastelloy C
Standard Components (-00)
Guide 316 Stainless Steel Hastelloy C Hastelloy C Hastelloy C
Spindle 410 Stainless Steel Hastelloy C Hastelloy C Hastelloy C
Adjusting Screw, Adjusting Screw Nut 416 Stainless Steel Hastelloy C Hastelloy C Hastelloy C
Eductor Tube 316 Stainless Steel 316 Stainless Steel Hastelloy C Hastelloy C
Bonnet Plug Carbon Steel Carbon Steel Hastelloy C Hastelloy C
Bellows Components (-30)
Guide 316 Stainless Steel 316 Stainless Steel Hastelloy C Hastelloy C
Spindle 410 Stainless Steel 410 Stainless Steel Hastelloy C Hastelloy C
Adjusting Screw, Adjusting Screw Nut 416 Stainless Steel 416 Stainless Steel Hastelloy C Hastelloy C

Bellows Inconel 625 LCF Hastelloy C Hastelloy C Hastelloy C

Bellows Nut, Bellows Flange 316L Stainless Steel Hastelloy C Hastelloy C Hastelloy C
Bellows Gasket Soft Iron Monel Monel Monel

1. The materials in red denote variation from standard material 5. Else Customer Specififed.
construction. 6. With Flexible Graphite Filler (Spiral Wound).
2. To specify valves, add material designation to the valve type, 1910L/ 7. 1900 DM - Nozzle material for the 1918/28 orifices D-G will be Inconel
H3 or 1910-30L/H3. X-750. Other materials are available depending on P/T.
3. ASME SA494 CW12MW Nickel Alloy.
4. Or Inconel X-750.

36 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Materials
Corrosive Service
Duplex Material(1) & (2)
Construction Variation
Component
D1 D2
Common Components (-00 and -30)
Base (1905-1918) ASME SA216 WCC Carbon Steel ASME SA216 WCC Carbon Steel
Base (1920-1928) ASME SA217 WC6 Alloy Steel ASME SA217 WC6 Alloy Steel
Base Plug (1905-1918) Carbon Steel Carbon Steel
Base Plug (1920-1928) 316 Stainless Steel 316 Stainless Steel
Nozzle(5) Duplex ASME SA479 UNS 31803(3) Duplex ASME SA479 UNS 31803(3)
Adjusting Ring 316 Stainless Steel Duplex ASME SA479 UNS 31803(3)
Adjusting Ring Pin 316 Stainless Steel Duplex SA479 UNS S31803
Adjusting Ring Pin Gasket Soft Iron Monel
Disc - Solid Metal Flat Seat Duplex ASME SA479 UNS 31803(3) Duplex ASME SA479 UNS 31803(3)
Disc - Thermodisc Inconel X-750 Inconel X-750
Disc Retainer, Spindle Retainer Inconel X-750 Inconel X-750
Disc Holder 316 Stainless Steel Duplex ASME SA479 UNS 31803(3)
Guide Gasket, Cap Gasket Soft Iron Monel
Bonnet ASME SA216 WCC Carbon Steel ASME SA216 WCC Carbon Steel
Base Stud ASME SA193 B7 Alloy Steel ASME SA193 B7 Alloy Steel
Stud Nut ASME SA194 2H Carbon Steel ASME SA194 2H Carbon Steel
Spring Washer Carbon Steel Carbon Steel
Spring (-20° to 800°F) Alloy Steel Alloy Steel
Spring (801° to 1000°F) Tungsten Steel or Inconel X-750 Tungsten Steel or Inconel X-750
Screwed Cap, Bolted Cap,
Carbon Steel Carbon Steel
Packed Cap
Plain Cap Malleable Iron Malleable Iron
Cap Bolt Carbon Steel Carbon Steel
Cap Set Screw Carbon Steel Carbon Steel
Release Nut, Release Locknut,
Carbon Steel Carbon Steel
Gag
Lever Malleable Iron Malleable Iron
Lifting Fork Malleable Iron Malleable Iron
Lever Shaft, Packing Nut 410/416 Stainless Steel 410/416 Stainless Steel
Packing 316 Stainless Steel(4) 316 Stainless Steel(4)
Top Lever, Drop Lever Malleable Iron Malleable Iron
Sealing Plug Carbon Steel Carbon Steel
Sealing Plug Gasket Soft Iron Monel
Limit Washer (D-2 and E-2) 316 Stainless Steel 316 Stainless Steel
Conventional (Standard) Valve Material (-00)
Guide 316 Stainless Steel Duplex ASME SA479 UNS 318033
Bonnet Gasket Soft Iron Monel
Spindle 410 Stainless Steel Duplex SA479 UNS S31803
Adjusting Screw, Adjusting
416 Stainless Steel Duplex SA479 UNS S31803
Screw Nut
Eductor Tube 316 Stainless Steel 316 Stainless Steel
Bonnet Plug Carbon Steel Carbon Steel
Bellows Valve Material (-30)
Guide 316 Stainless Steel 316 Stainless Steel
Bonnet Gasket Soft Iron Soft Iron
Spindle 410 Stainless Steel 410 Stainless Steel
Adjusting Screw, Adjusting
416 Stainless Steel 416 Stainless Steel
Screw Nut
Bellows Inconel 625 LCF Inconel 625 LCF
Bellows Nut, Bellows Flange 316L Stainless Steel 316L Stainless Steel
Bellows Gasket Soft Iron Monel

1. The materials in red denote variation from standard material 4. With Flexible Graphite Filler (Spiral Wound).
construction. 5. 1900 DM - Nozzle material for the 1918/28 orifices D-G will be
2. To specify valves, add material designation to the valve type, Inconel X-750. Other materials are available depending on
1910L/D2 or 1910-30L/D2. P/T.
3. Or SA995 UNS J93345.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 37
 Materials
Corrosive Service
Duplex Material(1) & (2)
Construction Variation
Component
D3 D4
Common Components (-00 and -30)
Base (1905-1918) ASME SA995 CE8MN UNS J93345 Duplex SS ASME SA995 CE8MN UNS J93345 Duplex SS
Base Plug (1905-1918) Duplex ASME SA479 UNS 31803 Duplex ASME SA479 UNS 31803
Nozzle(6) Duplex ASME SA479 UNS 31803(3) Duplex ASME SA479 UNS 31803(3)
Adjusting Ring Duplex ASME SA479 UNS 31803(3) Duplex ASME SA479 UNS 31803(3)
Adjusting Ring Pin Duplex SA479 UNS S31803 Duplex SA479 UNS S31803
Adjusting Ring Pin Gasket Monel Monel
Disc - Solid Metal Flat Seat Duplex ASME SA479 UNS 31803(3) Duplex ASME SA479 UNS 31803(3)
Disc - Thermodisc Inconel X-750 Inconel X-750
Disc Retainer, Spindle Retainer Inconel X-750 Inconel X-750
Disc Holder Duplex ASME SA479 UNS 31803(3) Duplex ASME SA479 UNS 31803(3)
Guide Gasket, Cap Gasket Monel Monel
Bonnet ASME SA995 CE8MN UNS J93345 Duplex ASME SA995 CE8MN UNS J93345 Duplex
Base Stud ASME SA193 B8M Alloy Steel ASME SA193 B8M Alloy Steel
Stud Nut ASME SA194 8M Carbon Steel ASME SA194 8M Carbon Steel
Spring Washer Carbon Steel Duplex ASME SA479 UNS S31803
Spring (-20° to 800°F) Alloy Steel Inconel X-750
Spring (801° to 1000°F) Tungsten Steel or Inconel X-750 Inconel X-750
Screwed Cap, Bolted Cap, Packed Cap Duplex ASME SA479 UNS 31803(3) Duplex ASME SA479 UNS 31803(3)
Plain Cap Not Applicable Not Applicable
Cap Bolt ASTM A193 B8M Stainless Steel ASTM A193 B8M Stainless Steel
Release Nut, Release Locknut, Gag Carbon Steel Carbon Steel
Lever Malleable Iron else Customer Specified Malleable Iron else Customer Specified
Lifting Fork Malleable Iron Malleable Iron
Lever Shaft, Packing Nut 410/416 Stainless Steel 410/416 Stainless Steel
Packing 316 Stainless Steel(4) 316 Stainless Steel(4)
Sealing Plug Duplex ASME SA479 UNS S31803 Duplex ASME SA479 UNS S31803
Sealing Plug Gasket Monel Monel
Limit Washer (D-2 and E-2) Duplex UNS S31803 Duplex UNS S31803
Conventional (Standard) Valve Material (-00)
Guide Duplex ASME SA479 UNS 31803(3) Duplex ASME SA479 UNS 31803(3)
Bonnet Gasket Monel Monel
Spindle Duplex SA479 UNS S31803 Duplex SA479 UNS S31803
Adjusting Screw, Adjusting Screw Nut Duplex SA479 UNS S31803 Duplex SA479 UNS S31803
Eductor Tube ASTM A789(5) ASTM A789(5)
Bonnet Plug Duplex ASME SA479 UNS S31803 Duplex ASME SA479 UNS S31803
Bellows Valve Material (-30)
Guide 316 Stainless Steel 316 Stainless Steel
Bonnet Gasket Monel Monel
Spindle 410 Stainless Steel 410 Stainless Steel
Adjusting Screw, Adjusting Screw Nut 416 Stainless Steel 416 Stainless Steel
Bellows Inconel 625 Inconel 625
Bellows Nut, Bellows Flange Inconel 625 Inconel 625
Bellows Gasket Monel Monel

1. The materials in red denote variation from standard material 4. With Flexible Graphite Filler (Spiral Wound)
construction.
5. Or ASME SA789 SAF 2507 Super Duplex UNS S32750
2. To specify valves, add material designation to the valve type,
6. 1900 DM - Nozzle material for the 1918/28 orifices D-G will be
1910L/D2 or 1910-30L/D2.
Inconel X-750. Other materials are available depending on P/T.
3. Or SA995 UNS J93345

38 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Materials
Low Temperature
Special Materials for Low Process Fluid Temperature(1) & (2)
Construction Variation
L1 L2 L3
Nomenclature
-21 to -75°F -151 to -450°F
-76 to -150°F (-60 to -101°C)
(-29 to -59°C) (-102 to -268°C)
Common Components (-00 and -30)
Base (1905-1918) ASME SA351 CF8M(3) ASME SA351 CF8M ASME SA351 CF8M
Base Plug (1905-1918), Nozzle(7) 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Adjusting Ring, Adjusting Ring Pin,
316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Guide
Adjusting Ring Pin Gasket, Sealing Plug
Monel Monel Monel
Gasket
Guide Gasket, Bonnet Gasket, Cap
Monel Monel Monel
Gasket
Disc - Solid Metal Flat Seat, Disc Holder 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel(5)
Disc - Cryodisc(6) Inconel X-750(5) Inconel X-750(5) Inconel X-750(5)
Bonnet ASME SA216 WCC CS ASME SA351 CF8M ASME SA351 CF8M
Base Stud ASME SA193 B8M St.St. ASME SA193 B8M St.St. ASME SA193 B8M St.St.
Stud Nut ASME SA194 8M St.St. ASME SA194 8M St.St. ASME SA194 8M St.St.
Spindle 410 Stainless Steel 316 Stainless Steel 316 Stainless Steel(5)
Disc Retainer, Spindle Retainer Inconel X-750 Inconel X-750 Inconel X-750
Spring Washer Carbon Steel 316 Stainless Steel 316 Stainless Steel(5)
Sealing Plug Carbon Steel 316 Stainless Steel 316 Stainless Steel
Spring (-450° to -76°F) Not Applicable 316 Stainless Steel 316 Stainless Steel
Spring (-75° to 800°F) Alloy Steel Not Applicable Not Applicable
Adjusting Screw 416 Stainless Steel 316 Stainless Steel 316 Stainless Steel(5)
Adjusting Screw Nut 416 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Screwed Cap, Bolted Cap, Packed Cap Carbon Steel 316 Stainless Steel 316 Stainless Steel
Plain Cap, Lifting Fork Malleable Iron 316 Stainless Steel 316 Stainless Steel
Cap Bolt Carbon Steel 316 Stainless Steel ASME SA193 B8M St.St.
Cap Set Screw, Release Nut, Release
Carbon Steel 316 Stainless Steel 316 Stainless Steel
Locknut
Lever, Top Lever, Drop Lever Malleable Iron Malleable Iron Malleable Iron
Lever Shaft, Packing Nut 410/416 Stainless Steel 410/416 Stainless Steel 410/416 Stainless Steel
Packing 316 Stainless Steel(4) 316 Stainless Steel(4) 316 Stainless Steel(4)
Gag Carbon Steel Carbon Steel Carbon Steel
Limit Washer (D-2 and E-2) 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Conventional (Standard) Components (-00)
Eductor Tube 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Bonnet Plug Carbon Steel 316 Stainless Steel 316 Stainless Steel
Bellows Components (-30)
Bellows Inconel 625 LCF Inconel 625 LCF 316L Stainless Steel
Bellows Nut , Bellows Flange 316L Stainless Steel 316L Stainless Steel 316L Stainless Steel
Bellows Gasket Monel Monel Monel

1. The materials in red denote variation from standard material 5. With Titanium Nitride Coating.
construction.
6. Available for 1900-DM Series. Optional for L1 & L2, Mandatory
2. To specify valves, add material designation to the valve type, for L3.
1910L/L2 or 1910-30L/L2.
7. 1900 DM - Nozzle material for the 1918/28 orifices D-G will be
3. ASME SA352 LCC can be substituted for bases down to -50°F Inconel X-750. Other materials are available depending on P/T.
(-45.6°C) when requested.
4. With Flexible Graphite Filler (Spiral Wound).

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 39
 Materials
Low Temperature

Special Materials for Low Ambient Temperatures (1), (2) & (3)
(to -50°F or -45°C)
Construction Variation
Component
C1 C2 (4)

Common Components (-00 and -30)

Base (1905-1918) ASME SA352 LCC Carbon Steel ASME SA351 CF8M Stainless Steel

Base Plug (1905-1918), Nozzle(6) 316 Stainless Steel 316 Stainless Steel

Adjusting Ring, Adjusting Ring Pin 316 Stainless Steel 316 Stainless Steel

Adjusting Ring Pin Gasket, Guide Gasket Soft Iron Soft Iron

Disc - Solid Metal Flat Seat 316 Stainless Steel 316 Stainless Steel

Disc - Thermodisc 616 Stainless Steel 616 Stainless Steel

Disc Retainer, Spindle Retainer Inconel X-750 Inconel X-750

Disc Holder, Guide, Spring Washer 316 Stainless Steel 316 Stainless Steel

Bonnet Gasket, Cap Gasket, Sealing Plug Gasket Soft Iron Soft Iron

Bonnet ASME SA352 LCC Carbon Steel ASME SA351 CF8M Stainless Steel

Base Stud ASME SA193 B8M Stainless Steel ASME SA193 B8M Stainless Steel

Stud Nut ASME SA194 8M Stainless Steel ASME SA194 8M Stainless Steel

Spindle 410 Stainless Steel 410 Stainless Steel

Spring (-50° to 800°F) Alloy Steel Alloy Steel

Adjusting Screw, Adjusting Screw Nut 416 Stainless Steel 416 Stainless Steel

Screwed Cap, Bolted Cap, Packed Cap LCC Carbon Steel LCC Carbon Steel

Plain Cap, Lever, Lifting Fork, Top Lever, Drop Lever Malleable Iron Malleable Iron

Cap Bolt, Gag, Sealing Plug Carbon Steel Carbon Steel

Cap Set Screw, Limit Washer (D-2 and E-2) 316 Stainless Steel 316 Stainless Steel

Release Nut, Release Locknut Carbon Steel Carbon Steel

Lever Shaft, Packing Nut 410/416 Stainless Steel 410/416 Stainless Steel

Packing 316 Stainless Steel(5) 316 Stainless Steel(5)

Conventional (Standard) Valve Components (-00)

Eductor Tube 316 Stainless Steel 316 Stainless Steel

Bonnet Plug 316 Stainless Steel 316 Stainless Steel

Bellows Valve Components (-30)

Bellows Inconel 625 LCF Inconel 625 LCF

Bellows Nut, Bellows Flange 316L Stainless Steel 316L Stainless Steel

Bellows Gasket Soft Iron Soft Iron

1. The materials in red denote variation from standard material construction.

2. Media temperature may impact valve temperature. Contact factory for assistance.
3. To specify valves, add material designation to the valve type, 1910L/C1 or 1910-30L/C1.
4. If impact testing is required, use the “C1” material variation.
5. With Flexible Graphite Filler (Spiral Wound).
6. 1900 DM - Nozzle material for the 1918/28 orifices D-G will be Inconel X-750. Other materials are available depending on P/T.

40 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Materials
High Temperature

Special Materials for Low Process Fluid Temperature(1) & (2)

T1 T2 (3) & (4)

1001 to 1200°F (538°C to 649°C) 1201 to 1500°F (649 to 815°C)

Component
Standard Valve Material Bellows Valve Material Standard Valve Material
(-00) (-30) (-00)
Base(1920-1928) ASME SA351 CF8M St.St. ASME SA351 CF8M St.St. ASME SA351 CF8M St.St.(5)
Base Plug(1920-1928), Nozzle 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Adjusting Ring, Adjusting Ring Pin 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Adjusting Ring Pin Gasket, Guide Gasket Monel Monel Monel
Disc - Solid Metal Flat Seat 316 Stainless Steel 316 Stainless Steel Inconel X-750
Disc - Thermodisc, Disc Retainer Inconel X-750 Inconel X-750 Inconel X-750
Disc Holder 316 Stainless Steel(6) 316 Stainless Steel(6) 316 Stainless Steel(6)
Guide 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel(6)
Bonnet ASME SA351 CF8M St.St. ASME SA351 CF8M St.St. ASME SA351 CF8M St.St.(7)
Bonnet Gasket, Sealing Plug Gasket Monel Monel Not Applicable
Base Stud ASME SA193 B8M Alloy Steel ASME SA193 B8M Alloy Steel ASME SA193 B8M Alloy Steel
Stud Nut ASME SA194 8M Carbon Steel ASME SA194 8M Carbon Steel ASME SA194 8M Carbon Steel
Spindle 410 Stainless Steel 410 Stainless Steel 316 Stainless Steel (Stellited)
Spindle Retainer Inconel X-750 Inconel X-750 Inconel X-750
Spring Washer Carbon Steel Carbon Steel 410 Stainless Steel
Tungsten Steel or Inconel Tungsten Steel or Inconel Tungsten Steel or Inconel
Spring
X-750 X-750 X-750
Adjusting Screw 416 Stainless Steel 416 Stainless Steel 416 Stainless Steel
Adjusting Screw Nut 416 Stainless Steel 416 Stainless Steel 416 Stainless Steel
Screwed Cap, Bolted Cap, Packed Cap Carbon Steel Carbon Steel Carbon Steel
Plain Cap, Cap Bolt, Gag, Sealing Plug Carbon Steel Carbon Steel Carbon Steel
Cap Set Screw Carbon Steel Carbon Steel Malleable Iron
Cap Gasket Monel Monel Not Applicable
Release Nut, Release Locknut Carbon Steel Carbon Steel Carbon Steel
Lever, Lifting Fork, Top Lever, Drop Lever Malleable Iron Malleable Iron Malleable Iron
Lever Shaft, Packing Nut 410/416 Stainless Steel 410/416 Stainless Steel 410/416 Stainless Steel
Packing 316 Stainless Steel(8) 316 Stainless Steel(8) 316 Stainless Steel(8)
Eductor Tube, Bonnet Plug 316 Stainless Steel Not Applicable Not Applicable
Limit Washer (D-2 and E-2) 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Bellows Not Applicable Inconel 625 LCF Inconel 625 LCF
Bellows Nut, Bellows Flange Not Applicable Inconel 625 Inconel 625
Bellows Gasket Not Applicable Monel Monel
Deflector Plate (Not Shown) Not Applicable Not Applicable 316 Stainless Steel

1. The materials in red denote variation from standard material 5. Carbon content must be 0.04% or higher.
construction.
6. Glide-Aloy Coated.
2. To specify valves, add material designation to the valve type,
7. Slotted Yoke Bonnet for T2. Slotted Bonnet not available for liquid
1920L/T2 or 1920-30L/T2.
service.
3. All T2 valves have ASME Class 300 outlet flanges.
8. With Flexible Graphite Filler (Spiral Wound).
4. Consult factory for temperatures above 1500°F (815°C).

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 41
 Materials
Valves for Lethal Service

In some industries, there are lethal service applications which require special consideration. If your application
may be for lethal service, please review this information. “Lethal Service” should be prominently indicated in
your discussions, inquiries, or purchase orders.

I. Definition III. Base, Bonnet, and Cap Casting

ASME B and PVC, Section VIII (Division 1) states Requirements
that it is the responsibility of the user to state that A. Each casting requires 100 percent visual
the valve will be in lethal service. inspection
B. Each casting requires complete surface
IMPORTANT:
examination either by magnetic particle for
Baker Hughes does not determine if a fluid is le- steel castings or liquid penetrant for stainless
thal. The customer must specify the fluid is lethal castings.
and paperwork should be clearly stamped to
C. Each casting shall have radiographic
identify that the application is a lethal fluid. examination.
D. All repairs to base, bonnet and cap castings
The ASME Code definition is as follows: must be documented.
Lethal Substance - Poisonous gases or liquids of
such a nature that a very small amount of the gas or E. All threads must be inspected for continuity of
the vapor of the liquid, mixed or unmixed with air, is threads
dangerous to life when inhaled. F. Hydro test should be 10 minutes.
ASME B31.3 - A chemical plant and petroleum refining G. The base drain plug is to be sealed by seal
piping standard, supplies a similar definition, which it welding a plug of the same material as the
calls a “Category M Fluid Service.” base.
II. Valve Requirements for Lethal Service H. The bonnet vent is to be sealed in accordance
Application with paragraph G for conventional valves
A. Only closed bonnet valves with a screwed or (non-bellows). Bellows valves are to have the
bolted cap or packed lever can be used for lethal vent connection vented to a safe location.
service. IV. Additional Requirements
B. Valve model numbers that are acceptable for A. Each bellows requires a mass spectrometer
lethal service after modification are 1905/1910 leak test to 1 x 10-7 cc/sec to be imposed.
conventional and bellows flanged valves. B. It is necessary to seal the nozzle-
C. It is recommended that a soft-seat design be base joint. The customer must state its
used for improved tightness. preference between a seal weld or O-ring
joint, depending on conformance of its
D. When service temperature exceeds 450°F
maintenance practice.
(232°C), bolting material review is required by
Baker Hughes Engineering team. C. The nozzle and disc require hydro testing with
a hold time for a minimum of 10 minutes.
E. Use non-sparking material for flammable media.
Examples are Bronze, 316 Stainless Steel, and D. Cleaning procedures and lubricants used
Monel. shall be acceptable for lethal service.
E. Back pressure testing is required.

42 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Materials
1900/1900 DM O-ring Selection

O-ring Selection Table - Durometer

Set Pressure Range
Teflon3 (-300°F to 200°F) Teflon3 (201°F to 500°F)
50(1) 70 - 75(1) 90(2)
Valve Type (-184.4 to 93.3°C) (93.9 to 260°C)

psig barg psig barg psig barg psig barg psig barg

min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max.
1900D and E 5 75 0.34 5.17 76 800 5.24 55.16 801 2000 55.23 137.90 2000 6000 137.90 413.69 285 6000 19.65 413.69

1900F 5 75 0.34 5.17 76 800 5.24 55.16 801 2000 55.23 137.90 2000 6000 137.90 413.69 285 6000 19.65 413.69

1900G 5 75 0.34 5.17 76 780 5.24 53.78 781 1900 53.85 131.00 1900 3705 131.00 255.45 285 3705 19.65 255.45

1900H 5 75 0.34 5.17 76 780 5.24 53.78 781 1900 53.85 131.00 1900 2750 131.00 189.61 285 2750 19.65 189.61

1900J 5 75 0.34 5.17 76 780 5.24 53.78 781 1900 53.85 131.00 1900 2700 131.00 186.16 285 2700 19.65 186.16

1900K 5 75 0.34 5.17 76 580 5.24 39.99 581 1400 40.06 96.53 1400 2220 96.53 153.06 250 2220 17.24 153.06

1900L 5 75 0.34 5.17 76 580 5.24 39.99 581 1400 40.06 96.53 1400 1500 96.53 103.42 155 1500 10.69 103.42

1900M 5 75 0.34 5.17 76 580 5.24 39.99 581 1100 40.06 75.84 – – – – 140 1100 9.65 75.84

1900N 5 75 0.34 5.17 76 580 5.24 39.99 581 1000 40.06 68.95 – – – – 90 1000 6.21 68.95

1900P 5 70 0.34 4.83 71 500 4.90 34.47 501 1000 34.54 68.95 – – – – 75 1000 5.17 68.95

1900Q 5 70 0.34 4.83 71 420 4.90 28.96 421 600 29.03 41.37 – – – – 80 600 5.52 41.37

1900R 5 50 0.34 3.45 51 420 3.52 28.96 421 600 29.03 41.37 – – – – 60 300 4.14 20.68

1900T 5 50 0.34 3.45 51 200 3.52 13.79 201 300 13.86 20.68 – – – – 30 300 2.07 20.68

1900U 5 50 0.34 3.45 51 200 3.52 13.79 201 300 13.86 20.68 – – – – 30 300 2.07 20.68

1900V – – – – 15 150 1.03 10.34 151 300 10.41 20.68 – – – – 15 300 1.03 20.68

1900W – – – – 7 150 0.48 10.34 151 300 10.41 20.68 – – – – 15 300 1.03 20.68

1. Maximum set pressure for silicone compounds is half of the maximum value.
2. The E962-90D 0-Ring can be used in steam service in applications down to 15 psig (1.03 barg).
3. Teflon will not be supplied for conditions that deviate from these ranges.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 43
 Materials
O-ring Selection

O-ring Temperature Limits

Materials Durometer Description (1) Temp. Limits (°F) Temp. Limits (°C)

50 N299-50 or N1009-50 -45 to +225 -43 to +107

70 N674-70 -40 to +250 -40 to +121

Nitrile
90 N552-90 -40 to +250 -40 to +121

70(2) N1173-70 -25 to +300 -31 to +149

50 E1100-50 or E981-50 -65 to +212 -53 to +100

70 E603-70 -65 to +212 -53 to +100

Ethylene/
75 and 80(3) E740-75 and E515-80 -70 to +250 -57 to +121
Propylene
90 E962-90(4) -70 to +500 -57 to +260

75(5) E962-75 -60 to +250/400 -51 to +121/204

50 V986-50 -15 to +400 -26 to +204

Fluorocarbon 75 V747-75 or V884-75 -15 to +400 -26 to +204

90 V894-90 or V709-90 -15 to +400 -26 to +204

50 C267-50 -45 to +300 -43 to +149

Neoprene
70 C944-70 or C873-70 -45 to +300 -43 to +149

50 S595-50 -65 to +437 -53 to +225

Silicone
70 S604-70 -65 to +437 -53 to +225

Teflon N/A Teflon -300 to +505 -184 to +263

82 1050LF -42 to +550 -41 to +288

75 4079 -58 to +601 -50 to +316

Kalrez(6) 91 3018 -35 to +601 -37 to +316

65 1058 -40 to +500 -40 to +260

1. Contact factory for O-ring selection for various fluids.

2. Consult factory before using. For use with freon 134A/ester oil service.
3. S
 et pressure ranges from durometer table for 70-75 Durometer shall apply to these compounds (for nuclear service, radiation
environment).
4. EPR962-90D can be used on steam service to lower pressure limit of 15 psig (1.03 barg).
5. Can be used upto 400°F (204°C) for steam applications.
6. Consult factory before selecting.

44 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Accessories
Caps, Levers, and Accessories

Lifting Mechanisms Plain Lever

The purpose of the lifting mechanism is to open This lever assembly is not pressure- tight and should
the valve when the pressure under the valve disc is not be used where back pressure is present or where
lower than the set pressure. These mechanisms are the escape of vapor discharging from an open valve
available in three basic types: plain lever, packed is undesirable around the lever assembly.
lever and air-operated lifting device. The lifting lever Packed Lever
may be used as follows: As indicated by the name, this lifting lever assembly
1. To lift the disc from the valve seat periodically is packed around the lever shaft, so that leakage will
during the operation of equipment to be sure not occur around the upper part of the valve when
that the disc holder is not frozen in the guide as the valve is open or when back pressure is present.
a result of corrosion, coking, sulphur deposits, The packed lifting lever should be used when positive
etc. This will promote protection of the unit at all protection against leakage is required.
times. Operating pressure under the disc should be Bolted Cap
approximately 75 percent of the set pressure when Consolidated Standard Safety Relief valves are
lifting in accordance with the ASME Code; otherwise supplied with screwed caps but bolted caps are
the lever assembly could be damaged. available.
2. To remove foreign particles that are sometimes Gag
trapped under the seat as the valve closes. The purpose of the gag is to hold the safety relief
Immediate cleaning of the valve seat with the valve closed while equipment is undergoing
pressure of the media, by use of the lifting lever, an operational hydrostatic test. This is the only
will correct an otherwise leaking valve, save purpose for which the gag is intended, and it can be
maintenance costs at a later date and in some accomplished by pulling the gag hand- tight. Force
cases avoid equipment shutdown. should never be used. The gag should never be left
3. To vent equipment to the atmosphere or discharge in the valve during the operation of the equipment. It
piping. should be removed after each use and hung in a safe,
convenient location and the sealing plug reinstated
and properly torqued.

ASME B and PVC, Section I, Lever

• ASME Code requires Safety Relief Valves used in liquid economizer applications must be supplied with a
lifting mechanism. Due to the relief of hot water, a packed lifting lever is required.
• ASME Code states that Safety Relief Valves used for liquid thermal fluid heaters shall not use a lifting
mechanism. Valves used in such applications shall be specified with a bolted or screwed cap.

ASME B and PVC, Section VIII, Lever

• ASME Codes require that a lifting lever must be supplied with the valve for steam, air, and hot water service
over 140°F (60°C) applications. While this need not be a sealed lifting mechanism, the ASME Codes do
recommend that sealed lifting mechanisms be used. The lifting lever may be omitted under Code Case
2203, but Baker Hughes requires that all orders for pressure relief valves without levers or blowdown valves
for steam, air, and water over 140°F (60°C) state specifically that the valves are being purchased per Code
Case 2203. The purchaser is responsible for obtaining jurisdictional authorization for use of Code Case
2203.
• When ASME Code stamped valves are used for thermal relief applications, the ASME Code guidelines shall
be followed in regard to lifting levers.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 45
 Accessories
Caps, Levers, and Accessories

Air-Operated Lifting Device Air-Operated Lifting Device

The Air-Operated Lifting Device
uses an air cylinder to obtain lifting
power to open the valve from a Air Cylinder

remote control station. Normal

operation of the safety relief valve Mounting Stud
is independent of the lifting device. Stud Nut Mounting Plate

Please specify actual required

conditions, otherwise the device Pin Cap

will be supplied to operate with at Lever Release

least 75 percent of set pressure Clevis Locknut
under the disc in accordance with
Lifting Fork
the ASME Code.
Requirements for special Lever Shaft
Release Nut
application: Lever Shaft Collar
Collar Retaining Ring Cap Bolt
valve size, set pressure, minimum
pressure at which the valve Packing Nut Cap Gasket
must be kept open, air pressure Packing Lever Nut
Spindle
for operator, or electrical
characteristics for solenoid
operation.
Regulated air, not to exceed 100
psig, is required for operation.

Valve Position Indicators

A valve position indicator, in general, is a micro switch apparatus used for remote indication of the opening of a
safety relief valve. It is designed to activate warning devices such as control panel lights or auditory indicators.
This option enhances the control function of operators located in remote control stations. Please advise voltage
requirements for proper selection of micro switch when ordering.

Other special options/accessories

Vent Bug Screen Block Body

Slotted Bonnet Steam Jacket (Available in 1900-30 (High Pressure, Special Materials,
bellows valve only)­ Special Dimensions)­

46 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Accessories
Packed Lever
Packed Lever
As indicated by the name, this
lifting lever assembly is packed
around the lever shaft, so that 23
29
leakage will not occur around
the upper part of the valve when 28
the valve is open or when back
pressure is present. The packed 32
lifting lever should be used when 33
positive protection against 30
34
leakage is required.
31 25

27

Plain Lever
This lever assembly is not pressure-tight and should not be used where back pressure is present or where the
escape of vapor from an open valve is undesirable around the lever assembly. It is designed with either a one-
or two-piece lever as illustrated below. The design is based on valve size and/or valve set pressure.

One-Piece Lever Design Two-Piece Lever Design

24
29

28

35

26

30

36

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 47
 Accessories
Bolted Cap
Consolidated standard safety relief valves are Bolted Cap
supplied with screwed caps, but bolted caps are
available. 22

25

27

Cap with Gag

The purpose of the gag is to hold the safety relief
valve closed while equipment is being subjected
to an operational hydrostatic test. This is the only
37 purpose for which the gag is intended, and it can be
38 accomplished by pulling the gag hand-tight. Force
should never be used. The gag should never be left
in the valve during the operation of the equipment. It
39
should be removed each time after using and hung
in a safe, convenient location.

Cap with Gag

48 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Accessories
Cap and Lever Construction

Standard, Alloy, Monel, Hastelloy and Duplex Material(1)

Construction Variation
Cap
Component Std., A1, A2, H1, H2, Alloy 20 Hastelloy HF Alky
Type
L1, M1, MB, M2,
D1, D2, S2, T1, T2 A3 and A4 H3 and H4 HA

23 Cap Carbon Steel Alloy 20 Hastelloy C Carbon Steel

25 Cap Bolts Carbon Steel Alloy 20 Hastelloy C Carbon Steel

27 Cap Gasket Soft Iron(3) Monel Monel Monel

30 Packed Lever Malleable Iron Malleable Iron Malleable Iron Malleable Iron

410/416 Stainless 410/416 Stainless 410/416 Stainless 410/416 Stainless

Packed 32 Lever Shaft
Steel Steel Steel Steel
Lever
33 Packing 316 Stainless Steel(2) 316 Stainless Steel(2) 316 Stainless Steel(2) 316 Stainless Steel(4)

34 Packing Nut 410/416 SS 410/416 SS 410/416 SS 410/416 SS

31 Lifting Fork Malleable Iron Malleable Iron Malleable Iron Malleable Iron

28 Release Nut Carbon Steel Carbon Steel Carbon Steel Carbon Steel

29 Release Lock Nut Carbon Steel Carbon Steel Carbon Steel Carbon Steel

24 Cap Malleable Iron N/A N/A Malleable Iron

26 Cap Set Screw Carbon Steel N/A N/A Carbon Steel

35 Top Lever Malleable Iron N/A N/A Malleable Iron

Plain 36 Drop Lever Malleable Iron N/A N/A Malleable Iron

Lever
28 Release Nut Carbon Steel N/A N/A Carbon Steel

29 Release Lock Nut Carbon Steel N/A N/A Carbon Steel

Plain Lever
30 Malleable Iron N/A N/A Malleable Iron
(One Piece)

22 Cap Carbon Steel Alloy 20 Hastelloy C Carbon Steel

Bolted
25 Cap Bolts Carbon Steel Alloy 20 Hastelloy C Carbon Steel
Cap
27 Cap Gasket Soft Iron(3) Monel Monel Monel

37 Gag Bolt Carbon Steel Carbon Steel Carbon Steel Carbon Steel

Gag 38 Sealing Plug Carbon Steel Alloy 20 Hastelloy C Carbon Steel

39 Plug Gasket(3) Soft Iron Monel Monel Monel

1. The materials in red denote variation from standard material construction.

2. With Flexible Graphite Filler (Spiral Wound).
3. Gasket material is Monel for A2, H2, MB, M2, D2 and S2 construction.
4. Or Graphlock

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 49
 Accessories
Cap and Lever Construction

Monel, Stainless, and Low Temperature Material(1)

Construction Variation

Cap Low
Component Monel Duplex Stainless Steel
Type Temperature

M3 and M4 D3 and D4 S3 and S4 L2 and L3

23 Cap Monel Duplex ASME SA479(3) 316 Stainless Steel 316 Stainless Steel

25 Cap Bolts Monel K500 ASTM A193 B8M Stainless Steel ASME SA193 B8M SS ASME SA193 B8M SS

27 Cap Gasket Monel Monel Monel Monel

30 Packed Lever Malleable Iron Malleable Iron Malleable Iron Malleable Iron

Packed 32 Lever Shaft 410/416 St.St. 410/416 Stainless Steel 316 Stainless Steel 410/416 St.St.
Lever 33 Packing 316 Stainless Steel(2) 316 Stainless Steel(2) 316 Stainless Steel(2) 316 Stainless Steel(2)

34 Packing Nut 410/416 St.St. 410/416 Stainless Steel 316 Stainless Steel 410/416 St.St.

31 Lifting Fork Malleable Iron Malleable Iron 316 Stainless Steel 316 Stainless Steel

28 Release Nut Carbon Steel Carbon Steel 316 Stainless Steel 316 Stainless Steel

29 Release Lock Nut Carbon Steel Carbon Steel 316 Stainless Steel 316 Stainless Steel

24 Cap N/A N/A 316 Stainless Steel 316 Stainless Steel

26 Cap Set Screw N/A N/A 316 Stainless Steel 316 Stainless Steel

35 Top Lever N/A N/A Malleable Iron Malleable Iron

Plain 36 Drop Lever N/A N/A Malleable Iron Malleable Iron

Lever
28 Release Nut N/A N/A Carbon Steel Carbon Steel

29 Release Lock Nut N/A N/A Carbon Steel Carbon Steel

Plain Lever (One

30 N/A N/A Malleable Iron Malleable Iron
Piece)

22 Cap Monel Duplex ASME SA479(3) 316 Stainless Steel 316 Stainless Steel
Bolted
25 Cap Bolts Monel K500 B8M Stainless Steel B8M Stainless Steel B8M Stainless Steel
Cap
27 Cap Gasket Monel Monel Monel Monel

37 Gag Bolt Carbon Steel Carbon Steel Carbon Steel Carbon Steel

Gag 38 Sealing Plug Monel Duplex ASME SA479 UNS S31803 316 Stainless Steel 316 Stainless Steel

39 Plug Gasket Monel Monel Monel Monel

1. The materials in red denote variation from standard material construction.

2. With Flexible Graphite Filler (Spiral Wound).
3. Duplex ASME SA479 UNS 31803 or SA995 UNS J93345

50 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Accessories
Bolt-on Jackets

Jacketing of Relief Valves maintenance. The jackets cover from flange to flange
providing uniform heat to all process-wetted surfaces.
Baker Hughes offers simple solutions to your heating Standard service ratings for the jacket are 150 psig and
problems with Bolt-on Jackets for Consolidated valves. 500°F. Higher ratings are available upon request.
Viscous materials that freeze or harden in relief valve Bolt-on Jackets may be ordered with adjacent flange
nozzles create hazardous conditions. Process pipe coverage, and with a variety of heating medium
jacketing or tracing may not offer sufficient heat to connections. Canadian registration is available for all
the area in and around the relief valve seat. During a provinces.
pressure surge, some of the solid materials may stick
in and around the seating area, keeping the valve from Bolt-on Jackets are operating successfully on relief
functioning and re-seating properly. This can result in valves in many different process service applications
leakage around the valve seating surface. worldwide. Buyers should consider jacketing the relief
valves whenever the adjacent vessel or piping is heated
The solution to this problem is the Bolt-on Jacket, a two- in some manner. The following process applications
piece aluminum casting has a steel pressure chamber typically require jacketing of the relief valve:
embedded in the aluminum jacket casting. The
pressure chamber is fabricated of standard pressure • Acrylic Acid • Phosphorous
vessel materials for various heating fluids and service
• Ammonium Nitrate • Polypropylene
temperatures. The chamber is configured and tested in
accordance with the ASME B and PVC, Section VIII, • Coal Tars • Polystyrene Resins
Div. I. The jacket casting conducts heat from the • Caprolactam • Phthalic Anhydride
pressure chamber and rapidly distributes it evenly over
the outer surface of the relief valve. • Cyanuric Chloride • Sulphuric Acid

The aluminum casting distributes heat only, it carries no • DMT • Sulphur Dioxide
pressure load at any time. Heating fluid is transferred • DNT • Some Surfactants
from one half of the jacket to the other by an external
• Fluoropolymers • Tall Oils
connector. A thin layer of heat transfer cement is used
between the jacket and the relief valve to promote • LLDPE • TMA
effective heat transfer by filling any air gaps between
• Olefins
the jacket and the relief valve.
Bolt-on Jacket halves bolt together for quick installation
and unbolt for ready access to the relief valve for easy

To ensure we provide the proper jacket coverage, please

answer the following questions:
1. Is the process operating at elevated temperatures?
Typical Bolt-on Jacket
2. What is the process?
3. What is the temperature of the process being
maintained?
4. What heating medium is being used in your jacket?
What pressure and temperature is this medium?
5. What type of jacket connections are required?
6. How is the temperature being maintained on the
process piping and other equipment (valves, pumps,
meters, etc.)?
The relief valve will probably need a Bolt-on Jacket if it is
operating in one of the process services listed above or if
the adjacent piping and equipment is heated.
Contact the factory for assistance.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 51
 Dimensions and Weights
1900/1900 DM Flanged Series
Conventional Safety Relief Valve
This table applies to the standard
1900 Series regardless of materials of
construction.
The table provides overall dimensions for
standard valve size and pressure class
offerings as shown on pages 5-9.
If the valve you are reviewing has an inlet
or outlet size different from standard valve
offerings, the dimensions “A” through
“E” and weight may not apply. Consult
the factory for non-standard valve
dimensions.

D
C

A
Drain Note:
Inlet and outlet combinations, as
E well as orifices sizes shown in the
following tables, are compliant with
B API Standard 526, Latest Edition.
For replacement valves that do not
comply with this edition, contact the
factory for verification of dimensions
and inlet and outlet combinations. The
U, V and W orifice valves are not API
526 orifice sizes.

52 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Dimensions and Weights
Valve Data - D Orifice
C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 4.13 104.9 4.50 114.3 17.00 431.8 18.00 457.2 5.44 138.2 1.13 28.7 40 18.1

1906 4.13 104.9 4.50 114.3 17.00 431.8 18.00 457.2 5.44 138.2 1.38 35.1 40 18.1

1910 4.13 104.9 4.50 114.3 17.50 444.5 18.50 469.9 5.44 138.2 1.38 35.1 50 22.7

1912 4.13 104.9 4.50 114.3 18.25 463.6 19.25 489.0 6.31 160.3 1.38 35.1 55 24.9

1914 4.13 104.9 5.50 139.7 21.75 552.5 22.75 577.9 7.81 198.4 1.94 49.3 95 43.1

1916 4.13 104.9 5.50 139.7 21.75 552.5 22.75 577.9 7.81 198.4 1.94 49.3 95 43.1

1918 5.50 139.7 7.00 177.8 26.50 673.1 27.50 698.5 8.88 225.6 2.44 62.0 150 68.0

1920 4.13 104.9 4.50 114.3 17.50 444.5 18.50 469.9 5.44 138.2 1.38 35.1 50 22.7

1922 4.13 104.9 4.50 114.3 17.50 444.5 18.50 469.9 5.44 138.2 1.38 35.1 50 22.7

1924 4.13 104.9 5.50 139.7 21.75 552.5 22.75 577.9 7.81 198.4 1.94 49.3 95 43.1

1926 4.13 104.9 5.50 139.7 21.75 552.5 22.75 577.9 7.81 198.4 1.94 49.3 95 43.1

1928 5.50 139.7 7.00 177.8 26.50 673.1 27.50 698.5 8.88 225.6 2.44 62.0 150 68.0

Valve Data - E Orifice

C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 4.13 104.9 4.50 114.3 17.00 431.8 18.00 457.2 5.44 138.2 1.13 28.7 40 18.1

1906 4.13 104.9 4.50 114.3 17.00 431.8 18.00 457.2 5.44 138.2 1.38 35.1 40 18.1

1910 4.13 104.9 4.50 114.3 17.50 444.5 18.50 469.9 5.44 138.2 1.38 35.1 50 22.7

1912 4.13 104.9 4.50 114.3 18.25 463.6 19.25 489.0 6.31 160.3 1.38 35.1 55 24.9

1914 4.13 104.9 5.50 139.7 21.75 552.5 22.75 577.9 7.81 198.4 1.94 49.3 95 43.1

1916 4.13 104.9 5.50 139.7 21.75 552.5 22.75 577.9 7.81 198.4 1.94 49.3 95 43.1

1918 5.50 139.7 7.00 177.8 26.50 673.1 27.50 698.5 8.88 225.6 2.44 62.0 150 68.0

1920 4.13 104.9 4.50 114.3 17.50 444.5 18.50 469.9 5.44 138.2 1.38 35.1 50 22.7

1922 4.13 104.9 4.50 114.3 17.50 444.5 18.50 469.9 5.44 138.2 1.38 35.1 50 22.7

1924 4.13 104.9 5.50 139.7 21.75 552.5 22.75 577.9 7.81 198.4 1.94 49.3 95 43.1

1926 4.13 104.9 5.50 139.7 21.75 552.5 22.75 577.9 7.81 198.4 1.94 49.3 95 43.1

1928 5.50 139.7 7.00 177.8 26.50 673.1 27.50 698.5 8.88 225.6 2.44 62.0 150 68.0

D
C

Drain A
E

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 53
 Dimensions and Weights
Valve Data - F Orifice
C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 4.88 124.0 4.75 120.7 17.75 450.9 18.75 476.3 5.44 138.2 1.25 31.8 40 18.1

1906 4.88 124.0 4.75 120.7 17.75 450.9 18.75 476.3 5.44 138.2 1.50 38.1 45 20.4

1910 4.88 124.0 6.00 152.4 18.25 463.6 19.25 489.0 5.44 138.2 1.56 39.6 50 22.7

1912 4.88 124.0 6.00 152.4 19.00 482.6 20.00 508.0 6.31 160.3 1.56 39.6 60 27.2

1914 4.88 124.0 6.50 165.1 22.50 571.5 23.50 596.9 7.81 198.4 1.94 49.3 100 45.4

1916 4.88 124.0 6.50 165.1 22.50 571.5 23.50 596.9 7.81 198.4 1.94 49.3 100 45.4

1918 5.50 139.7 7.00 177.8 26.50 673.1 27.50 698.5 8.88 225.6 2.44 62.0 150 68.0

1920 4.88 124.0 6.00 152.4 18.25 463.6 19.25 489.0 5.44 138.2 1.56 39.6 50 22.7

1922 4.88 124.0 6.00 152.4 18.25 463.6 19.25 489.0 5.44 138.2 1.56 39.6 50 22.7

1924 4.88 124.0 6.50 165.1 22.50 571.5 23.50 596.9 7.81 198.4 1.94 49.3 100 45.4

1926 4.88 124.0 6.50 165.1 22.50 571.5 23.50 596.9 7.81 198.4 1.94 49.3 100 45.4

1928 5.50 139.7 7.00 177.8 26.50 673.1 27.50 698.5 8.88 225.6 2.44 62.0 150 68.0

Valve Data - G Orifice

C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 4.88 124.0 4.75 120.7 17.75 450.9 19.00 482.6 5.44 138.2 1.25 31.8 55 24.9

1906 4.88 124.0 4.75 120.7 17.75 450.9 19.00 482.6 5.44 138.2 1.50 38.1 55 24.9

1910 4.88 124.0 6.00 152.4 18.25 463.6 19.50 495.3 5.44 138.2 1.56 39.6 60 27.2

1912 4.88 124.0 6.00 152.4 19.00 482.6 20.25 514.4 6.31 160.3 1.56 39.6 65 29.5

1914 4.88 124.0 6.50 165.1 22.50 571.5 23.75 603.3 7.81 198.4 1.94 49.3 95 43.1

1916 6.13 155.7 6.75 171.5 23.75 603.3 25.00 635.0 7.81 198.4 2.19 55.6 100 45.4

1918 6.13 155.7 6.75 171.5 23.75 603.3 25.00 635.0 7.81 198.4 2.69 68.3 110 49.9

1920 4.88 124.0 6.00 152.4 18.25 463.6 19.50 495.3 5.44 138.2 1.56 39.6 60 27.2

1922 4.88 124.0 6.00 152.4 19.00 482.6 20.25 514.4 6.31 160.3 1.56 39.6 65 29.5

1924 4.88 124.0 6.50 165.1 22.50 571.5 23.75 603.3 7.81 198.4 1.94 49.3 95 43.1

1926 6.13 155.7 6.75 171.5 23.75 603.3 25.00 635.0 7.81 198.4 2.19 55.6 100 45.4

1928 6.13 155.7 6.75 171.5 23.75 603.3 25.00 635.0 7.81 198.4 2.69 68.3 110 49.9

D
C

Drain A
E

B
54 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.
 Dimensions and Weights
Valve Data - H Orifice
C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 5.13 130.3 4.88 124.0 19.50 495.3 19.50 495.3 6.31 160.3 1.25 31.8 60 27.2

1906 5.13 130.3 4.88 124.0 19.50 495.3 19.50 495.3 6.31 160.3 1.56 39.6 60 27.2

1910 5.13 130.3 4.88 124.0 20.25 514.4 20.25 514.4 6.31 160.3 1.69 42.9 65 29.5

1912 6.06 153.9 6.38 162.1 23.00 584.2 23.00 584.2 7.00 177.8 1.69 42.9 85 38.6

1914 6.06 153.9 6.38 162.1 26.00 660.4 26.00 660.4 8.25 209.6 2.19 55.6 130 59.0

1916 6.06 153.9 6.38 162.1 26.00 660.4 26.00 660.4 8.25 209.6 2.19 55.6 140 63.5

1920 5.13 130.3 4.88 124.0 20.25 514.4 20.25 514.4 6.31 160.3 1.69 42.9 65 29.5

1922 5.13 130.3 4.88 124.0 20.25 514.4 20.25 514.4 6.31 160.3 1.69 42.9 65 29.5

1924 6.06 153.9 6.38 162.1 23.00 584.2 23.00 584.2 7.00 177.8 2.19 55.6 90 40.8

1926 6.06 153.9 6.38 162.1 26.00 660.4 26.00 660.4 8.25 209.6 2.19 55.6 140 63.5

Valve Data - J Orifice

C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 5.38 136.7 4.88 124.0 21.25 539.8 21.25 539.8 6.88 174.8 1.31 33.3 75 34.0

1906 5.38 136.7 4.88 124.0 21.25 539.8 21.25 539.8 6.88 174.8 1.56 39.6 75 34.0

1910 7.25 184.2 7.13 181.1 25.63 651.0 25.63 651.0 7.38 187.5 1.81 46.0 100 45.4

1912 7.25 184.2 7.13 181.1 29.88 759.0 29.88 759.0 9.00 228.6 1.81 46.0 170 77.1

1914 7.25 184.2 7.13 181.1 29.75 755.7 29.75 755.7 9.00 228.6 2.19 55.6 195 88.5

1916 7.25 184.2 7.13 181.1 29.75 755.7 29.75 755.7 9.00 228.6 2.56 65.0 220 99.8

1920 7.25 184.2 7.13 181.1 25.63 651.0 25.63 651.0 7.38 187.5 1.81 46.0 100 45.4

1922 7.25 184.2 7.13 181.1 25.63 651.0 25.63 651.0 7.38 187.5 1.81 46.0 100 45.4

1924 7.25 184.2 7.13 181.1 29.88 759.0 29.88 759.0 9.00 228.6 2.31 58.7 180 81.6

1926 7.25 184.2 7.13 181.1 29.75 755.7 29.75 755.7 9.00 228.6 2.56 65.0 220 99.8

D
C

Drain A
E

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 55
 Dimensions and Weights
Valve Data - K Orifice
C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 6.13 155.7 6.38 162.1 25.50 647.7 24.50 622.3 7.38 187.5 1.44 36.6 110 49.9

1906 6.13 155.7 6.38 162.1 24.50 622.3 24.50 622.3 7.38 187.5 1.81 46.0 115 52.2

1910 6.13 155.7 6.38 162.1 28.00 711.2 28.00 711.2 7.75 196.9 1.94 49.3 140 63.5

1912 7.25 184.2 7.13 181.1 29.25 743.0 29.25 743.0 7.75 196.9 1.94 49.3 150 68.0

1914 7.81 198.4 8.50 215.9 35.25 895.4 35.25 895.4 10.50 266.7 2.19 55.6 300 136.1

1916 7.75 196.9 8.50 215.9 35.25 895.4 35.25 895.4 10.50 266.7 2.56 65.0 320 145.1

1920 6.13 155.7 6.38 162.1 28.00 711.2 28.00 711.2 7.75 196.9 1.94 49.3 140 63.5

1922 6.13 155.7 6.38 162.1 28.00 711.2 28.00 711.2 7.75 196.9 1.94 49.3 140 63.5

1924 7.81 198.4 8.50 215.9 35.25 895.4 35.25 895.4 10.50 266.7 2.19 55.6 300 136.1

1926 7.75 196.9 8.50 215.9 35.25 895.4 35.25 895.4 10.50 266.7 2.56 65.0 320 145.1

Valve Data - L Orifice

C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 6.13 155.7 6.50 165.1 28.75 730.3 28.75 730.3 8.88 225.6 1.44 36.6 140 63.5

1906 6.13 155.7 6.50 165.1 28.75 730.3 28.75 730.3 8.88 225.6 1.81 46.0 145 65.8

1910 7.06 179.3 7.13 181.1 32.00 812.8 32.00 812.8 9.50 241.3 1.94 49.3 220 99.8

1912 7.06 179.3 8.00 203.2 32.00 812.8 32.00 812.8 9.50 241.3 2.19 55.6 230 104.3

1914 7.75 196.9 8.75 222.3 37.25 946.2 37.25 946.2 12.25 311.2 2.44 62.0 360 163.3

1916 7.75 196.9 8.75 222.3 37.25 946.2 37.25 946.2 12.25 311.2 2.81 71.4 370 167.8

1920 7.06 179.3 7.13 181.1 32.00 812.8 32.00 812.8 9.50 241.3 1.94 49.3 220 99.8

1922 7.06 179.3 8.00 203.2 32.00 812.8 32.00 812.8 9.50 241.3 2.19 55.6 230 104.3

1924 7.75 196.9 8.75 222.3 37.25 946.2 37.25 946.2 12.25 311.2 2.44 62.0 360 163.3

1926 7.75 196.9 8.75 222.3 37.25 946.2 37.25 946.2 12.25 311.2 2.81 71.4 370 167.8

D
C

Drain A
E

56 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Dimensions and Weights
Valve Data - M Orifice
C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 7.00 177.8 7.25 184.2 29.75 755.7 29.75 755.7 9.38 238.3 1.63 41.4 185 83.9

1906 7.00 177.8 7.25 184.2 29.75 755.7 29.75 755.7 9.38 238.3 1.94 49.3 190 86.2

1910 7.00 177.8 7.25 184.2 32.00 812.8 32.00 812.8 9.38 238.3 1.94 49.3 230 104.3

1912 7.00 177.8 8.00 203.2 36.25 920.8 36.25 920.8 10.75 273.1 2.19 55.6 300 136.1

1914 7.75 196.9 8.75 222.3 37.00 939.8 37.00 939.8 10.75 273.1 2.44 62.0 340 154.2

1920 7.00 177.8 7.25 184.2 32.00 812.8 32.00 812.8 9.38 238.3 1.94 49.3 230 104.3

1922 7.00 177.8 8.00 203.2 36.25 920.8 36.25 920.8 10.75 273.1 2.19 55.6 300 136.1

1924 7.75 196.9 8.75 222.3 37.00 939.8 37.00 939.8 10.75 273.1 2.44 62.0 340 154.2

Valve Data - N Orifice

C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 7.75 196.9 8.25 209.6 33.00 838.2 33.00 838.2 10.13 257.3 1.63 41.4 220 99.8

1906 7.75 196.9 8.25 209.6 33.00 838.2 33.00 838.2 10.13 257.3 1.94 49.3 225 102.1

1910 7.75 196.9 8.25 209.6 34.25 870.0 34.25 870.0 10.50 266.7 1.94 49.3 260 117.9

1912 7.75 196.9 8.75 222.3 39.00 990.6 39.00 990.6 11.75 298.5 2.19 55.6 360 163.3

1914 7.75 196.9 8.75 222.3 39.00 990.6 39.00 990.6 11.75 298.5 2.44 62.0 380 172.4

1920 7.75 196.9 8.25 209.6 34.25 870.0 34.25 870.0 10.50 266.7 1.94 49.3 260 117.9

1922 7.75 196.9 8.75 222.3 39.00 990.6 39.00 990.6 11.75 298.5 2.19 55.6 360 163.3

1924 7.75 196.9 8.75 222.3 39.00 990.6 39.00 990.6 11.75 298.5 2.44 62.0 380 172.4

D
C

Drain A
E

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 57
 Dimensions and Weights
Valve Data - P Orifice
C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 7.13 181.1 9.00 228.6 34.25 870.0 34.25 870.0 11.00 279.4 1.63 41.4 260 117.9

1906 7.13 181.1 9.00 228.6 24.25 616.0 34.25 870.0 11.00 279.4 1.94 49.3 270 122.5

1910 8.88 225.6 10.00 254.0 41.00 1041.4 41.00 1041.4 11.50 292.1 1.94 49.3 350 158.8

1912 8.88 225.6 10.00 254.0 43.50 1104.9 43.50 1104.9 13.88 352.6 2.19 55.6 530 240.4

1914 8.88 225.6 10.00 254.0 43.50 1104.9 43.50 1104.9 13.88 352.6 2.44 62.0 545 247.2

1920 8.88 225.6 10.00 254.0 41.00 1041.4 41.00 1041.4 11.50 292.1 1.94 49.3 350 158.8

1923 8.88 225.6 10.00 254.0 43.50 1104.9 43.50 1104.9 13.88 352.6 2.19 55.6 530 240.4

1924 8.88 225.6 10.00 254.0 43.50 1104.9 43.50 1104.9 13.88 352.6 2.44 62.0 545 247.2

Valve Data - Q Orifice

C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 9.44 239.8 9.50 241.3 41.00 1041.4 41.00 1041.4 13.63 346.2 1.81 46.0 430 195.0

1906 9.44 239.8 9.50 241.3 41.00 1041.4 41.00 1041.4 13.63 346.2 13.63 346.2 445 201.8

1910 9.44 239.8 9.50 241.3 43.25 1098.6 43.25 1098.6 14.00 355.6 2.25 57.2 530 240.4

1912 9.44 239.8 9.50 241.3 46.00 1168.4 46.00 1168.4 14.25 362.0 2.69 68.3 645 292.6

1920 9.44 239.8 9.50 241.3 41.00 1041.4 41.00 1041.4 13.63 346.2 2.25 57.2 445 201.8

1922 9.44 239.8 9.50 241.3 46.00 1168.4 46.00 1168.4 14.25 362.0 2.69 68.3 645 292.6

D
C

A
Drain
E

58 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Dimensions and Weights
Valve Data - R Orifice
C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 9.44 239.8 9.50 241.3 43.00 1092.2 43.00 1092.2 14.50 368.3 1.81 46.0 495 224.5

1906 9.44 239.8 9.50 241.3 43.00 1092.2 43.00 1092.2 14.50 368.3 2.25 57.2 510 231.3

1910 9.44 239.8 10.50 266.7 45.50 1155.7 45.50 1155.7 14.50 368.3 2.25 57.2 550 249.5

1912 9.44 239.8 10.50 266.7 47.50 1206.5 47.50 1206.5 15.13 384.3 2.69 68.3 675 306.2

1920 9.44 239.8 9.50 241.3 43.00 1092.2 43.00 1092.2 14.50 368.3 2.25 57.2 510 231.3

1922 9.44 239.8 10.50 266.7 47.50 1206.5 47.50 1206.5 15.13 384.3 2.69 68.3 675 306.2

Valve Data - T Orifice

C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 10.88 276.4 11.00 279.4 47.50 1206.5 47.50 1206.5 16.50 419.1 1.94 49.3 620 281.2

1906 10.88 276.4 11.00 279.4 47.25 1200.2 47.25 1200.2 16.50 419.1 2.44 62.0 640 290.3

1910 10.88 276.4 11.00 279.4 53.38 1355.9 53.38 1355.9 16.50 419.1 2.44 62.0 840 381.0

1912 10.88 276.4 11.00 279.4 53.38 1355.9 53.38 1355.9 16.50 419.1 2.44 62.0 840 381.0

1920 10.88 276.4 11.00 279.4 53.38 1355.9 53.38 1355.9 16.50 419.1 2.44 62.0 840 381.0

1922 10.88 276.4 11.00 279.4 53.38 1355.9 53.38 1355.9 16.50 419.1 2.44 62.0 840 381.0

D
C

Drain A
E

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 59
 Dimensions and Weights
Valve Data - U Orifice
C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 10.88 276.4 11.00 279.4 47.50 1206.5 47.50 1206.5 16.50 419.1 1.94 49.3 620 281.2

1906 10.88 276.4 11.00 279.4 47.25 1200.2 47.25 1200.2 16.50 419.1 2.44 62.0 640 290.3

1910 10.88 276.4 11.00 279.4 53.38 1355.9 53.38 1355.9 16.50 419.1 2.44 62.0 840 381.0

1920 10.88 276.4 11.00 279.4 53.38 1355.9 53.38 1355.9 16.50 419.1 2.44 62.0 840 381.0

Valve Data - V Orifice

C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 12.00 304.8 16.00 406.4 62.00 1574.8 62.00 1574.8 21.75 552.5 2.00 50.8 1600 725.7

1906 12.00 304.8 16.00 406.4 62.00 1574.8 62.00 1574.8 21.75 552.5 2.69 68.3 1700 771.1

1910 12.00 304.8 16.00 406.4 66.00 1676.4 66.00 1676.4 24.50 622.3 2.69 68.3 2000 907.2

1920 12.00 304.8 16.00 406.4 66.00 1676.4 66.00 1676.4 24.50 622.3 2.69 68.3 2000 907.2

Valve Data - W Orifice

C Approximate
Valve A B D E
Standard Bellows Weight
Type
in. mm in. mm in. mm in. mm in. mm in. mm lb. kg

1905 14.00 355.6 16.00 406.4 70.00 1778.0 70.00 1778.0 24.50 622.3 2.81 71.4 2800 1270.1

1906 14.00 355.6 16.00 406.4 70.00 1778.0 70.00 1778.0 24.50 622.3 2.94 74.7 2860 1297.3

1910 14.00 355.6 16.00 406.4 70.00 1778.0 70.00 1778.0 24.50 622.3 2.94 74.7 2860 1297.3

1920 14.00 355.6 16.00 406.4 70.00 1778.0 70.00 1778.0 24.50 622.3 2.81 71.4 2800 1270.1

D
C

A
Drain
E

60 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 1900/1900 DM Pressure / Temperature
Pressure / Temperature Tables
How to Use Rating Tables Procedure
The included tables specify important data about the Example
valve including valve sizes, flange ratings, pressure
Valve Set Pressure 500 psig (34.47 barg)
and temperature limits, back pressure ratings and
materials with allowable temperature ranges. Back Pressure 50 psig (3.45 barg)

After determining valve size from the Valve Sizing Temperature 100°F (37.8°C)
section, or capacity tables in this section, select the Valve “J”
proper set of tables and graphs (in the following
Enter the graph on page 71 for the “J” size, select
pages) for the size valve.
set pressure on the bottom scale at 500 psig
Enter the pressure and temperature graphs and (34.47 barg), follow this line vertically upward until
determine valve type. Review the table of data for it intersects the 100°F (38°C) line. The selection is a
that size valve to get other pertinent information. 1910Jc valve.
Notes:
Results
1. The pressure/temperature limitations shown in the Referring to the table on page 70, the valve is 3”
following tables are based on the limits specified in
API526 applicable to the 1900/1900 DM Series supplied (76.2 mm) - 300 x 4” (101.6 mm) - 150 with a carbon
in standard materials of construction. For pressure/ steel body and spring. The back pressure limit is
temperature limitations of valves made from special satisfactory for 50 psig (3.45 barg) back pressure.
materials, consult the factory or the SRVS sizing
program. (Note that 1900-30 bellows design valve Springs
supplied with the standard Inconel 625 bellows is Within given temperature limits, alloy steel springs
limited to a temperature range of 400°F (204°C) to
1500°F (816°C).)
are specified. Most springs are of alloy steel
construction which offers superior strength and
2. ASME Class 300 outlet flanges are permitted for mating
purposes only on valves that are normally supplied corrosion-resistant properties.
with standard ASME Class 150 pressure rating. For back
pressure applications exceeding the ASME Class 150 Materials
pressure rating, use SRVS sizing program or contact the The operating temperature should be used to select
factory for assistance. the materials in valves for fire-sizing applications.
3. When soft seats are used, they may govern the valve
pressure/temperature rating.

Minimum Set Pressures

The minimum set pressures of the 1900 flanged valves are in accordance with the following table.
Low Set Pressure Limit (2)
Orifice Conventional Valve Bellows Valve (1)
psig barg psig barg
D 5 0.34 15 1.03
E 5 0.34 15 1.03
F 5 0.34 15 1.03
G 4 0.27 15 1.03
H 4 0.27 15 1.03
J 5 0.34 10 0.68
K 5 0.34 10 0.68
L 6 0.41 10 0.68
M 6 0.41 10 0.68
N 9 0.62 10 0.68
P 7 0.48 10 0.68
Q 7 0.48 10 0.68
R 7 0.48 10 0.68
T 9 0.62 10 0.68
U 8 0.55 10 0.68
V 15 1.03 15 1.03
W 7 0.48 15 1.03
1. The bonnet must be vented when a bellows is used.
2. Valves with set pressure less than 15 psig cannot be stamped with the ASME stamp.

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 61
Pressure / Temperature
Pressure Temperature Ratings for D Orifice(1)
Backpressure Ratings @ 100ºF
API Ratings (D Orifice - 0.110 in 2 (0.710 cm 2 ))
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings
Conventional
Valve -20 to 100ºF 450ºF 800ºF 1000ºF
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 1.00 25.4 2.00 50.8 150 150 285 19.65 185 12.75 80 5.51 - - 285 19.65 128 8.82 230 15.85
1906 1.00 25.4 2.00 50.8 300 150 285 19.65 285 19.65 285 19.65 - - 285 19.65 128 8.82 230 15.85
1910 1.00 25.4 2.00 50.8 300 150 740 51.02 615 42.40 410 28.26 - - 285 19.65 128 8.82 230 15.85
1912 1.00 25.4 2.00 50.8 600 150 1480 102.04 1235 85.15 825 56.88 - - 285 19.65 128 8.82 230 15.85
1914 1.50 38.1 2.00 50.8 900 300 2220 153.06 1845 127.20 1235 85.15 - - 600 41.36 128 8.82 500 34.47
1916 1.50 38.1 2.00 50.8 1500 300 3705 255.45 3080 212.35 2060 142.03 - - 600 41.36 128 8.82 500 34.47
1918 1.50 38.1 3.00 76.2 2500 300 6000 413.68 5150 355.10 3430 236.49 - - 740 51.02 128 8.82 500 34.47
1920 1.00 25.4 2.00 50.8 300 150 - - - - 510 35.16 215 14.82 285 19.65 128 8.82 230 15.85
1922 1.00 25.4 2.00 50.8 600 150 - - - - 1015 69.98 430 29.64 285 19.65 128 8.82 230 15.85
1924 1.50 38.1 2.00 50.8 900 300 - - - - 1525 105.14 650 44.81 600 41.36 128 8.82 500 34.47
1926 1.50 38.1 2.00 50.8 1500 300 - - - - 2540 175.12 1080 74.46 600 41.36 128 8.82 500 34.47

1928 1.50 38.1 3.00 76.2 2500 300 - - - - 4230 291.64 1800 124.10 740 51.02 128 8.82 500 34.47

Pressure Temperature Ratings for D Orifice(1)

Backpressure Ratings @ 100ºF
ASME Ratings (D Orifice - 0.128 in 2 (0.825 cm 2 ) Actual)
(37.8ºC)

Connection Flanged Ratings Standard Material of Construction Bellows

-20 to 100ºF 450ºF 800ºF 1000ºF Conventional

Valve Inlet Outlet Inlet Outlet LP HP
(-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)
Type
R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 1.00 25.4 2.00 50.8 150 150 290 19.99 185 12.75 80 5.51 - - 290 19.99 128 8.82 290 19.99

1906 1.00 25.4 2.00 50.8 300 150 290 19.99 290 19.99 290 19.99 - - 290 19.99 128 8.82 290 19.99

1910 1.00 25.4 2.00 50.8 300 150 750 51.71 685 47.22 410 28.26 - - 290 19.99 128 8.82 290 19.99

1912 1.00 25.4 2.00 50.8 600 150 1500 103.42 1368 94.32 825 56.88 - - 290 19.99 128 8.82 290 19.99

1914 1.50 38.1 2.00 50.8 900 300 2250 155.13 2053 141.54 1235 85.15 - - 750 51.71 128 8.82 750 51.71

1916 1.50 38.1 2.00 50.8 1500 300 3750 258.55 3423 236.00 2055 141.68 - - 750 51.71 128 8.82 750 51.71

1918 1.50 38.1 3.00 76.2 2500 300 6250 430.92 5703 393.20 3430 236.49 - - 750 51.71 128 8.82 750 51.71

1920 1.00 25.4 2.00 50.8 300 150 - - - - 510 35.16 215 14.82 290 19.99 128 8.82 290 19.99

1922 1.00 25.4 2.00 50.8 600 150 - - - - 1015 69.98 430 29.64 290 19.99 128 8.82 290 19.99

1924 1.50 38.1 2.00 50.8 900 300 - - - - 1525 105.14 650 44.81 750 51.71 128 8.82 750 51.71

1926 1.50 38.1 2.00 50.8 1500 300 - - - - 2540 175.12 1080 74.46 750 51.71 128 8.82 750 51.71

1928 1.50 38.1 3.00 76.2 2500 300 - - - - 4230 291.64 1800 124.10 750 51.71 128 8.82 750 51.71

1. In 1995 API Changed connections from 2.5 - 3 in. (63.50 -76.20 mm).
For replacement applications, valves with 2.5 in. (63.50 mm) connections are still available.

62 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs
(801°F to 900 1920D 1922D 1924D 1926D 1928D
1000°F)
800
1906D
700

© 2021 Baker Hughes Company. All rights reserved.

1910D 1912D 1914D 1916D 1918D
600
1905D
500
Alloy Steel
400 1906D
Springs
(-75°F up to
300
800°F)
1910D 1912D 1914D 1916D 1918D
200 1905D

100 1905D/L1
1906D/L1

INLET TEMPERATURE °F
0
1910D/L1 1912D/L1 1914D/L1 1916D/L1 1918D/L1
Pressure / Temperature

-100 1910D/L2 1912D/L2 1914D/L2 1916D/L2 1918D/L2

1900 and 1900-30 Series, D Orifice - API Area: 0.110 in2. (0.710 cm2)

-200 1905D/L2
1906D/L2
Stainless
Steel -300 1910D/L3 1912D/L3 1914D/L3 1916D/L3 1918D/L3
Springs 1905D/L3
(-76°F to -400 1906D/L3
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450
0 200 400 600 800 1000 1200 1400 1600 1800 2000 3000 4000 5000 6000

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 63

Pressure / Temperature
Pressure Temperature Ratings for E Orifice(1)
Backpressure Ratings @ 100ºF
API Ratings (E Orifice - 0.196 in 2 (1.265 cm 2 ))
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 1.00 25.4 2.00 50.8 150 150 285 19.65 185 12.75 80 5.51 - - 285 19.65 128 8.82 230 15.85

1906 1.00 25.4 2.00 50.8 300 150 285 19.65 285 19.65 285 19.65 - - 285 19.65 128 8.82 230 15.85

1910 1.00 25.4 2.00 50.8 300 150 740 51.02 615 42.40 410 28.26 - - 285 19.65 128 8.82 230 15.85

1912 1.00 25.4 2.00 50.8 600 150 1480 102.04 1235 85.15 825 56.88 - - 285 19.65 128 8.82 230 15.85

1914 1.50 38.1 2.00 50.8 900 300 2220 153.06 1845 127.20 1235 85.15 - - 600 41.36 128 8.82 500 34.47

1916 1.50 38.1 2.00 50.8 1500 300 3705 255.45 3080 212.35 2060 142.03 - - 600 41.36 128 8.82 500 34.47

1918 1.50 38.1 3.00 76.2 2500 300 6000 413.68 5150 355.10 3430 236.49 - - 740 51.02 128 8.82 500 34.47

1920 1.00 25.4 2.00 50.8 300 150 - - - - 510 35.16 215 14.82 285 19.65 128 8.82 230 15.85

1922 1.00 25.4 2.00 50.8 600 150 - - - - 1015 69.98 430 29.64 285 19.65 128 8.82 230 15.85

1924 1.50 38.1 2.00 50.8 900 300 - - - - 1525 105.14 650 44.81 600 41.36 128 8.82 500 34.47

1926 1.50 38.1 2.00 50.8 1500 300 - - - - 2540 175.12 1080 74.46 600 41.36 128 8.82 500 34.47

1928 1.50 38.1 3.00 76.2 2500 300 - - - - 4230 291.64 1800 124.10 740 51.02 128 8.82 500 34.47

Pressure Temperature Ratings for E Orifice(1)

Backpressure Ratings @ 100ºF
ASME Ratings (E Orifice - 0.228 in 2 (1.470 cm 2 ) Actual)
(37.8ºC)

Connection Flanged Ratings Standard Material of Construction Bellows

Conven-
-20 to 100ºF 450ºF 800ºF 1000ºF tional
Valve Inlet Outlet Inlet Outlet LP HP
(-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)
Type
R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 1.00 25.4 2.00 50.8 150 150 290 19.99 185 12.75 80 5.51 - - 290 19.99 128 8.82 290 19.99

1906 1.00 25.4 2.00 50.8 300 150 290 19.99 290 19.99 290 19.99 - - 290 19.99 128 8.82 290 19.99

1910 1.00 25.4 2.00 50.8 300 150 750 51.71 685 47.22 410 28.26 - - 290 19.99 128 8.82 290 19.99

1912 1.00 25.4 2.00 50.8 600 150 1500 103.42 1368 94.32 825 56.88 - - 290 19.99 128 8.82 290 19.99

1914 1.50 38.1 2.00 50.8 900 300 2250 155.13 2053 141.54 1235 85.15 - - 750 51.71 128 8.82 750 51.71

1916 1.50 38.1 2.00 50.8 1500 300 3750 258.55 3423 236.00 2055 141.68 - - 750 51.71 128 8.82 750 51.71

1918 1.50 38.1 3.00 76.2 2500 300 6250 430.92 5703 393.20 3430 236.49 - - 750 51.71 128 8.82 750 51.71

1920 1.00 25.4 2.00 50.8 300 150 - - - - 510 35.16 215 14.82 290 19.99 128 8.82 290 19.99

1922 1.00 25.4 2.00 50.8 600 150 - - - - 1015 69.98 430 29.64 290 19.99 128 8.82 290 19.99

1924 1.50 38.1 2.00 50.8 900 300 - - - - 1525 105.14 650 44.81 750 51.71 128 8.82 750 51.71

1926 1.50 38.1 2.00 50.8 1500 300 - - - - 2540 175.12 1080 74.46 750 51.71 128 8.82 750 51.71

1928 1.50 38.1 3.00 76.2 2500 300 - - - - 4230 291.64 1800 124.10 750 51.71 128 8.82 750 51.71

1. In 1995 API Changed connections from 2.5 - 3 in.(63.50 -76.20 mm).

For replacement applications, valves with 2.5 in.(63.50mm) connections are still available.

64 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs
(801°F to 900 1920E 1922E 1924E 1926E 1928E
1000°F)
800
1906E
700

© 2021 Baker Hughes Company. All rights reserved.

1910E 1912E 1914E 1916E 1918E
600
1905E
500
Alloy Steel
400 1906E
Springs
(-75°F up to
300
800°F)

200 1905E 1910E 1912E 1914E 1916E 1918E

100 1905E/L1
1906E/L1

INLET TEMPERATURE °F
0
1910E/L1 1912E/L1 1914E/L1 1916E/L1 1918E/L1
Pressure / Temperature

-100 1910E/L2 1912E/L2 1914E/L2 1916E/L2 1918E/L2

1900 and 1900-30 Series, E Orifice - API Area: 0.196 in2. (1.265 cm2)

-200 1905E/L2
1906E/L2
Stainless
Steel -300 1910E/L3 1912E/L3 1914E/L3 1916E/L3 1918E/L3
1905E/L3
Springs
1906E/L3
(-76°F to -400
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450
0 200 400 600 800 1000 1200 1400 1600 1800 2000 3000 4000 5000 6000

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 65

Pressure / Temperature
Pressure Temperature Ratings for F Orifice(1)
Backpressure Ratings @ 100ºF
API Ratings (F Orifice - 0.307 in 2 (1.981 cm 2 ))
(37.8ºC)

Connection Flanged Ratings Standard Material of Construction Bellows

Conven-
-20 to 100ºF 450ºF 800ºF 1000ºF tional
Valve Inlet Outlet Inlet Outlet LP HP
(-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)
Type
R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 1.50 38.1 2.00 50.8 150 150 285 19.65 185 12.75 80 5.51 - - 285 19.65 128 8.82 230 15.85

1906 1.50 38.1 2.00 50.8 300 150 285 19.65 285 19.65 285 19.65 - - 285 19.65 128 8.82 230 15.85

1910 1.50 38.1 2.00 50.8 300 150 740 51.02 615 42.40 410 28.26 - - 285 19.65 128 8.82 230 15.85

1912 1.50 38.1 2.00 50.8 600 150 1480 102.04 1235 85.15 825 56.88 - - 285 19.65 128 8.82 230 15.85

1914 1.50 38.1 3.00 76.2 900 300 2220 153.06 1845 127.20 1235 85.15 - - 740 51.02 128 8.82 500 34.47

1916 1.50 38.1 3.00 76.2 1500 300 3705 255.45 3080 212.35 2060 142.03 - - 740 51.02 128 8.82 500 34.47

1918 1.50 38.1 3.00 76.2 2500 300 5000 344.73 5000 344.73 3430 236.49 - - 740 51.02 128 8.82 500 34.47

1920 1.50 38.1 2.00 50.8 300 150 - - - - 510 35.16 215 14.82 285 19.65 128 8.82 230 15.85

1922 1.50 38.1 2.00 50.8 600 150 - - - - 1015 69.98 430 29.64 285 19.65 128 8.82 230 15.85

1924 1.50 38.1 3.00 76.2 900 300 - - - - 1525 105.14 650 44.81 740 51.02 128 8.82 500 34.47

1926 1.50 38.1 3.00 76.2 1500 300 - - - - 2540 175.12 1080 74.46 740 51.02 128 8.82 500 34.47

1928 1.50 38.1 3.00 76.2 2500 300 - - - - 4230 291.64 1800 124.10 740 51.02 128 8.82 500 34.47

Pressure Temperature Ratings for F Orifice(1)

Backpressure Ratings @ 100ºF
ASME Ratings (F Orifice - 0.357 in 2 (2.302 cm 2 ) Actual)
(37.8ºC)

Connection Flanged Ratings Standard Material of Construction Bellows

Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

in. mm in. mm R.F. or R.J. R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg

1905 1.50 38.1 2.00 50.8 150 150 290 19.99 185 12.75 80 5.51 - - 290 19.99 128 8.82 290 19.99

1906 1.50 38.1 2.00 50.8 300 150 290 19.99 290 19.99 290 19.99 - - 290 19.99 128 8.82 290 19.99

1910 1.50 38.1 2.00 50.8 300 150 750 51.71 685 47.22 410 28.26 - - 290 19.99 128 8.82 290 19.99

1912 1.50 38.1 2.00 50.8 600 150 1500 103.42 1368 94.32 825 56.88 - - 290 19.99 128 8.82 290 19.99

1914 1.50 38.1 3.00 76.2 900 300 2250 155.13 2053 141.54 1235 85.15 - - 750 51.71 128 8.82 750 51.71

1916 1.50 38.1 3.00 76.2 1500 300 3750 258.55 3423 236.00 2055 141.68 - - 750 51.71 128 8.82 750 51.71

1918 1.50 38.1 3.00 76.2 2500 300 6250 430.92 5703 393.20 3430 236.49 - - 750 51.71 128 8.82 750 51.71

1920 1.50 38.1 2.00 50.8 300 150 - - - - 510 35.16 215 14.82 290 19.99 128 8.82 290 19.99

1922 1.50 38.1 2.00 50.8 600 150 - - - - 1015 69.98 430 29.64 290 19.99 128 8.82 290 19.99

1924 1.50 38.1 3.00 76.2 900 300 - - - - 1525 105.14 650 44.81 750 51.71 128 8.82 750 51.71

1926 1.50 38.1 3.00 76.2 1500 300 - - - - 2540 175.12 1080 74.46 750 51.71 128 8.82 750 51.71

1928 1.50 38.1 3.00 76.2 2500 300 - - - - 4230 291.64 1800 124.10 750 51.71 128 8.82 750 51.71

1. In 1995 API Changed connections from 2.5 - 3 in.(63.50 -76.20 mm).

For replacement applications, valves with 2.5 in.(63.50mm) connections are still available.

66 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs
(801°F to 900 1920F 1922F 1924F 1926F 1928F
1000°F)
800
1906F
700

© 2021 Baker Hughes Company. All rights reserved.

1910F 1912F 1914F 1916F 1918F
600
1905F
500
Alloy Steel
400 1906F
Springs
(-75°F up to
300
800°F)

200 1905F 1910F 1912F 1914F 1916F 1918F

100 1905F/L1
1906F/L1

INLET TEMPERATURE °F
0
1910F/L1 1912F/L1 1914F/L1 1916F/L1 1918F/L1
Pressure / Temperature

-100 1910F/L2 1912F/L2 1914F/L2 1918F/L2

1900 and 1900-30 Series, F Orifice - API Area: 0.307 in2. (1.981 cm2)

-200 1905F/L2
1906F/L2 1916F/L2
Stainless
Steel -300 1905F/L3 1910F/L3 1916F/L3
1912F/L3 1914F/L3
Springs 1906F/L3
(-76°F to -400 1918F/L3
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450
0 200 400 600 800 1000 1200 1400 1600 1800 2000 3000 4000 5000 6000

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 67

Pressure / Temperature
Pressure Temperature Ratings for G Orifice(1)
Backpressure Ratings @ 100ºF
API Ratings (G Orifice - 0.503 in 2 (3.245 cm 2 ))
(37.8ºC)

Flanged Rat-
Connection Standard Material of Construction Bellows
ings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 1.50 38.1 3.00 76.2 150 150 285 19.65 185 12.75 80 5.51 - - 285 19.65 140 9.65 230 15.85

1906 1.50 38.1 3.00 76.2 300 150 285 19.65 285 19.65 285 19.65 - - 285 19.65 140 9.65 230 15.85

1910 1.50 38.1 3.00 76.2 300 150 740 51.02 615 42.40 410 28.26 - - 285 19.65 140 9.65 230 15.85

1912 1.50 38.1 3.00 76.2 600 150 1480 102.04 1235 85.15 825 56.88 - - 285 19.65 140 9.65 230 15.85

1914 1.50 38.1 3.00 76.2 900 300 2220 153.06 1845 127.20 1235 85.15 - - 740 51.02 140 9.65 470 32.40

1916 2.00 50.8 3.00 76.2 1500 300 3705 255.45 3080 212.35 2060 142.03 - - 740 51.02 140 9.65 470 32.40

1918 2.00 50.8 3.00 76.2 2500 300 3705 413.68 3705 255.45 3430 236.49 - - 740 51.02 140 9.65 470 32.40

1920 1.50 38.1 3.00 76.2 300 150 - - - - 510 35.16 215 14.82 285 19.65 140 9.65 230 15.85

1922 1.50 38.1 3.00 76.2 600 150 - - - - 1015 69.98 430 29.64 285 19.65 140 9.65 230 15.85

1924 1.50 38.1 3.00 76.2 900 300 - - - - 1525 105.14 650 44.81 740 51.02 140 9.65 500 34.47

1926 2.00 50.8 3.00 76.2 1500 300 - - - - 2540 175.12 1080 74.46 740 51.02 140 9.65 500 34.47

1928 2.00 50.8 3.00 76.2 2500 300 - - - - 3705 255.45 1800 124.10 740 51.02 140 9.65 500 34.47

Pressure Temperature Ratings for G Orifice(1)

Backpressure Ratings @ 100ºF
ASME Ratings (G Orifice - 0.585 in 2 (3.774 cm 2 ) Actual)
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 1.50 38.1 3.00 76.2 150 150 290 19.99 185 12.75 80 5.51 - - 290 19.99 140 9.65 290 19.99

1906 1.50 38.1 3.00 76.2 300 150 290 19.99 290 19.99 290 19.99 - - 290 19.99 140 9.65 290 19.99

1910 1.50 38.1 3.00 76.2 300 150 750 51.71 685 47.22 410 28.26 - - 290 19.99 140 9.65 290 19.99

1912 1.50 38.1 3.00 76.2 600 150 1500 103.42 1368 94.32 825 56.88 - - 290 19.99 140 9.65 290 19.99

1914 1.50 38.1 3.00 76.2 900 300 2250 155.13 2053 141.54 1235 85.15 - - 750 51.71 140 9.65 750 51.71

1916 2.00 50.8 3.00 76.2 1500 300 3750 258.55 3423 236.00 2055 141.68 - - 750 51.71 140 9.65 750 51.71

1918 2.00 50.8 3.00 76.2 2500 300 5000 344.73 5000 344.73 3430 236.49 - - 750 51.71 140 9.65 750 51.71

1920 1.50 38.1 3.00 76.2 300 150 - - - - 510 35.16 215 14.82 290 19.99 140 9.65 290 19.99

1922 1.50 38.1 3.00 76.2 600 150 - - - - 1015 69.98 430 29.64 290 19.99 140 9.65 290 19.99

1924 1.50 38.1 3.00 76.2 900 300 - - - - 1525 105.14 650 44.81 750 51.71 140 9.65 750 51.71

1926 2.00 50.8 3.00 76.2 1500 300 - - - - 2540 175.12 1080 74.46 750 51.71 140 9.65 750 51.71

1928 2.00 50.8 3.00 76.2 2500 300 - - - - 4230 291.64 1800 124.10 750 51.71 140 9.65 750 51.71

1. In 1995 API Changed connections from 2.5 - 3 in.(63.50 -76.20 mm).

For replacement applications, valves with 2.5 in.(63.50mm) connections are still available.

68 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs
(801°F to 900 1920G 1922G 1924G 1926G 1928G
1000°F)
800
1906G
700

© 2021 Baker Hughes Company. All rights reserved.

1910G 1912G 1914G 1916G 1918G
600
1905G
500
Alloy Steel
400 1906G
Springs
1918G
(-75°F up to
300
800°F)

200 1905G 1910G 1912G 1914G 1916G

100
1905G/L1
1906G/L1

INLET TEMPERATURE °F
0
1910G/L1 1912G/L1 1914G/L1 1916G/L1
1918G/L1
Pressure / Temperature

-100 1910G/L2 1912G/L2 1916G/L2

1918G/L2
1905G/L2
1900 and 1900-30 Series, G Orifice - API Area: 0.503 in2. (3.245 cm2)

-200 1914G/L2
1906G/L2
Stainless
Steel -300
1905G/L3 1910G/L3 1912G/L3 1916G/L3 1918G/L3
Springs
1906G/L3
(-76°F to -400 1914G/L3
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450
0 200 400 600 800 1000 1200 1400 1600 1800 2000 3000 4000 5000 6000

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 69

Pressure / Temperature
Pressure Temperature Ratings for H Orifice
Backpressure Ratings @ 100ºF
API Ratings (H Orifice - 0.785 in 2 (5.065 cm 2 ))
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 1.50 38.1 3.00 76.2 150 150 285 19.65 185 12.75 80 5.51 - - 285 19.65 104 7.17 230 15.85

1906 1.50 38.1 3.00 76.2 300 150 285 19.65 285 19.65 285 19.65 - - 285 19.65 104 7.17 230 15.85

1910 2.00 50.8 3.00 76.2 300 150 740 51.02 615 42.40 410 28.26 - - 285 19.65 104 7.17 230 15.85

1912 2.00 50.8 3.00 76.2 600 150 1480 102.04 1235 85.15 825 56.88 - - 285 19.65 104 7.17 230 15.85

1914 2.00 50.8 3.00 76.2 900 300 2220 153.06 1845 127.20 1235 85.15 - - 285 19.65 104 7.17 230 15.85

1916 2.00 50.8 3.00 76.2 1500 300 2750 189.60 2750 189.60 2060 142.03 - - 740 51.02 104 7.17 415 28.61

1920 2.00 50.8 3.00 76.2 300 150 - - - - 510 35.16 215 14.82 285 19.65 104 7.17 230 15.85

1922 2.00 50.8 3.00 76.2 600 150 - - - - 1015 69.98 430 29.64 285 19.65 104 7.17 230 15.85

1924 2.00 50.8 3.00 76.2 900 300 - - - - 1225 84.46 650 44.81 285 19.65 104 7.17 230 15.85

1926 2.00 50.8 3.00 76.2 1500 300 - - - - 2540 175.12 1080 74.46 740 51.02 104 7.17 415 28.61

Pressure Temperature Ratings for H Orifice

Backpressure Ratings @ 100ºF
ASME Ratings (H Orifice - 0.913 in 2 (5.888 cm 2 ) Actual)
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 1.50 38.1 3.00 76.2 150 150 290 19.99 185 12.75 80 5.51 - - 290 19.99 104 7.17 290 19.99

1906 1.50 38.1 3.00 76.2 300 150 290 19.99 290 19.99 290 19.99 - - 290 19.99 104 7.17 290 19.99

1910 2.00 50.8 3.00 76.2 300 150 750 51.71 685 47.22 410 28.26 - - 290 19.99 104 7.17 290 19.99

1912 2.00 50.8 3.00 76.2 600 150 1500 103.42 1368 94.32 825 56.88 - - 290 19.99 104 7.17 290 19.99

1914 2.00 50.8 3.00 76.2 900 300 2250 155.13 2053 141.54 1235 85.15 - - 290 19.99 104 7.17 750 51.71

1916 2.00 50.8 3.00 76.2 1500 300 3300 227.52 3300 227.52 2055 141.68 - - 750 51.71 104 7.17 750 51.71

1920 2.00 50.8 3.00 76.2 300 150 - - - - 510 35.16 215 14.82 290 19.99 104 7.17 750 51.71

1922 2.00 50.8 3.00 76.2 600 150 - - - - 1015 69.98 430 29.64 290 19.99 104 7.17 290 19.99

1924 2.00 50.8 3.00 76.2 900 300 - - - - 1525 105.14 650 44.81 290 19.99 104 7.17 290 19.99

1926 2.00 50.8 3.00 76.2 1500 300 - - - - 2540 175.12 1080 74.46 750 51.71 104 7.17 750 51.71

70 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs
(801°F to 900 1920H 1922H 1924H 1926H
1000°F)
800
1906H
700

© 2021 Baker Hughes Company. All rights reserved.

1910H 1912H 1914H 1916H
600
1905H
500
Alloy Steel
400 1906H
Springs
(-75°F up to
300
800°F)

200 1905H 1910H 1912H 1914H 1916H

100 1905H/L1
1906H/L1 1914H/L2

INLET TEMPERATURE °F
0
1910H/L1 1912H/L1 1914H/L1 1916H/L1
Pressure / Temperature

-100 1910H/L2 1912H/L2 1916H/L2

1905H/L2
1900 and 1900-30 Series, H Orifice - API Area: 0.785 in2. (5.065 cm2)

-200 1914H/L3
Stainless 1906H/L2
Steel -300 1910H/L3 1912H/L3 1916H/L3
1905H/L3
Springs
(-76°F to -400 1906H/L3
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2400 2800

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 71

Pressure / Temperature
Pressure Temperature Ratings for J Orifice(1)
Backpressure Ratings @ 100ºF
API Ratings (J Orifice - 1.287 in 2 (8.303 cm 2 ))
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 2.00 50.8 3.00 76.2 150 150 285 19.65 185 12.75 80 5.51 - - 285 19.65 89 6.13 230 15.85

1906 2.00 50.8 3.00 76.2 300 150 285 19.65 285 19.65 285 19.65 - - 285 19.65 89 6.13 230 15.85

1910 3.00 76.2 4.00 101.6 300 150 740 51.02 615 42.40 410 28.26 - - 285 19.65 89 6.13 230 15.85

1912 3.00 76.2 4.00 101.6 600 150 1480 102.04 1235 85.15 825 56.88 - - 285 19.65 89 6.13 230 15.85

1914 3.00 76.2 4.00 101.6 900 300 2220 153.06 1845 127.20 1235 85.15 - - 285 19.65 89 6.13 230 15.85

1916 3.00 76.2 4.00 101.6 1500 300 2700 186.15 2700 186.15 2060 142.03 - - 600 41.36 89 6.13 230 15.85

1920 3.00 76.2 4.00 101.6 300 150 - - - - 510 35.16 215 14.82 285 19.65 89 6.13 230 15.85

1922 3.00 76.2 4.00 101.6 600 150 - - - - 1015 69.98 430 29.64 285 19.65 89 6.13 230 15.85

1924 3.00 76.2 4.00 101.6 900 300 - - - - 1525 105.14 650 44.81 285 19.65 89 6.13 230 15.85

1926 3.00 76.2 4.00 101.6 1500 300 - - - - 2540 175.12 1080 74.46 600 41.36 89 6.13 230 15.85

Pressure Temperature Ratings for J Orifice(1)

Backpressure Ratings @ 100ºF
ASME Ratings (J Orifice - 1.496 in 2 (9.652 cm 2 ) Actual)
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve tional
-20 to 100ºF 450ºF 800ºF 1000ºF
Type Inlet Outlet Inlet Outlet LP HP
(-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

in. mm in. mm R.F. or R.J. R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg

1905 2.00 50.8 3.00 76.2 150 150 290 19.99 185 12.75 80 5.51 - - 290 19.99 89 6.13 290 19.99

1906 2.00 50.8 3.00 76.2 300 150 290 19.99 290 19.99 290 19.99 - - 290 19.99 89 6.13 290 19.99

1910 3.00 76.2 4.00 101.6 300 150 750 51.71 685 47.22 410 28.26 - - 290 19.99 89 6.13 290 19.99

1912 3.00 76.2 4.00 101.6 600 150 1500 103.42 1368 94.32 825 56.88 - - 290 19.99 89 6.13 290 19.99

1914 3.00 76.2 4.00 101.6 900 300 2250 155.13 2053 141.54 1235 85.15 - - 290 19.99 89 6.13 290 19.99

1916 3.00 76.2 4.00 101.6 1500 300 3100 213.73 3100 213.73 2055 141.68 - - 750 51.71 89 6.13 635 43.78

1920 3.00 76.2 4.00 101.6 300 150 - - - - 510 35.16 215 14.82 290 19.99 89 6.13 290 19.99

1922 3.00 76.2 4.00 101.6 600 150 - - - - 1015 69.98 430 29.64 290 19.99 89 6.13 290 19.99

1924 3.00 76.2 4.00 101.6 900 300 - - - - 1525 105.14 650 44.81 290 19.99 89 6.13 290 19.99

1926 3.00 76.2 4.00 101.6 1500 300 - - - - 2540 175.12 1080 74.46 750 51.71 89 6.13 635 43.78

1. In 1995 API Changed connections from 2.5 - 3 in.(63.50 -76.20 mm).

For replacement applications, valves with 2.5 in.(63.50mm) connections are still available.

72 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs
(801°F to 900 1920J 1922J 1924J 1926J
1000°F)
800
1906J
700

© 2021 Baker Hughes Company. All rights reserved.

1910J 1912J 1914J 1916J
600
1905J
500
Alloy Steel
400 1906J
Springs
(-75°F up to
300
800°F)

200 1905J 1910J 1912J 1914J 1916J

100 1905J/L1
1906J/L1

INLET TEMPERATURE °F
0
1910J/L1 1912J/L1 1914J/L1 1916J/L1
Pressure / Temperature

-100 1910J/L2 1914J/L2

1916J/L2
1900 and 1900-30 Series, J Orifice - API Area: 1.287 in2. (8.303 cm2)

-200 1905J/L2
1912J/L2
1906J/L2
Stainless
Steel -300 1912J/L3
Springs 1905J/L3 1910J/L3 1914J/L3
(-76°F to -400 1906J/L3
1916J/L3
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2400 2800

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 73

Pressure / Temperature
Pressure Temperature Ratings for K Orifice(1)
Backpressure Ratings @ 100ºF
API Ratings (K Orifice - 1.838 in 2 (11.858 cm 2 ))
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 3.00 76.2 4.00 101.6 150 150 285 19.65 185 12.75 80 5.51 - - 285 19.65 65 4.48 150 10.34

1906 3.00 76.2 4.00 101.6 300 150 285 19.65 285 19.65 285 19.65 - - 285 19.65 65 4.48 150 10.34

1910 3.00 76.2 4.00 101.6 300 150 740 51.02 615 42.40 410 28.26 - - 285 19.65 65 4.48 150 10.34

1912 3.00 76.2 4.00 101.6 600 150 1480 102.04 1235 85.15 825 56.88 - - 285 19.65 65 4.48 200 13.78

1914 3.00 76.2 6.00 152.4 900 150 2220 153.06 1845 127.20 1235 85.15 - - 285 19.65 65 4.48 200 13.78

1916 3.00 76.2 6.00 152.4 1500 300 2220 153.06 2220 153.06 2060 142.03 - - 600 41.36 65 4.48 200 13.78

1920 3.00 76.2 4.00 101.6 300 150 - - - - 510 35.16 215 14.82 285 19.65 65 4.48 230 15.85

1922 3.00 76.2 4.00 101.6 600 150 - - - - 1015 69.98 430 29.64 285 19.65 65 4.48 230 15.85

1924 3.00 76.2 6.00 152.4 900 150 - - - - 1525 105.14 650 44.81 285 19.65 65 4.48 230 15.85

1926 3.00 76.2 6.00 152.4 1500 300 - - - - 2220 153.06 1080 74.46 600 41.36 65 4.48 230 15.85

Pressure Temperature Ratings for K Orifice(1)

Backpressure Ratings @ 100ºF
ASME Ratings (K Orifice - 2.138 in 2 (13.794 cm 2 ) Actual)
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve tional
-20 to 100ºF 450ºF 800ºF 1000ºF
Type Inlet Outlet Inlet Outlet LP HP
(-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

in. mm in. mm R.F. or R.J. R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg

1905 3.00 76.2 4.00 101.6 150 150 290 19.99 185 12.75 80 5.51 - - 290 19.99 89 6.13 290 19.99

1906 3.00 76.2 4.00 101.6 300 150 290 19.99 290 19.99 290 19.99 - - 290 19.99 89 6.13 290 19.99

1910 3.00 76.2 4.00 101.6 300 150 750 51.71 685 47.22 410 28.26 - - 290 19.99 89 6.13 290 19.99

1912 3.00 76.2 4.00 101.6 600 150 1500 103.42 1368 94.32 825 56.88 - - 290 19.99 89 6.13 290 19.99

1914 3.00 76.2 6.00 152.4 900 150 2250 155.13 2053 141.54 1235 85.15 - - 290 19.99 89 6.13 290 19.99

1916 3.00 76.2 6.00 152.4 1500 300 3000 206.84 3000 206.84 2055 141.68 - - 750 51.71 89 6.13 535 36.88

1920 3.00 76.2 4.00 101.6 300 150 - - - - 510 35.16 215 14.82 290 19.99 89 6.13 290 19.99

1922 3.00 76.2 4.00 101.6 600 150 - - - - 1015 69.98 430 29.64 290 19.99 89 6.13 290 19.99

1924 3.00 76.2 6.00 152.4 900 150 - - - - 1525 105.14 650 44.81 290 19.99 89 6.13 290 19.99

1926 3.00 76.2 6.00 152.4 1500 300 - - - - 2540 175.12 1080 74.46 750 51.71 89 6.13 535 36.88

1. In 1995 API Changed connections from 2.5 - 3 in.(63.50 -76.20 mm).

For replacement applications, valves with 2.5 in.(63.50mm) connections are still available.

74 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs
(801°F to 900 1920K 1922K 1924K 1926K
1000°F)
800

700 1906K

© 2021 Baker Hughes Company. All rights reserved.

1910K 1912K 1914K 1916K
600

500 1905K

Alloy Steel
400 1906K 1916K
Springs
(-75°F up to
300
800°F)

200 1905K 1910K 1912K 1914K

100
1905K/L1 1912K/L2
1914K/L2

INLET TEMPERATURE °F
0 1906K/L1
1910K/L1 1912K/L1 1914K/L1 1916K/L1
Pressure / Temperature

-100 1910K/L2 1916K/L2

1900 and 1900-30 Series, K Orifice - API Area: 1.838 in2. (11.858 cm2)

-200 1905K/L2 1912K/L3

1906K/L2 1914K/L3
Stainless
Steel -300
Springs 1905K/L3 1910K/L3 1916K/L3
(-76°F to -400 1906K/L3
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 75

Pressure / Temperature
Pressure Temperature Ratings for L Orifice
Backpressure Ratings @ 100ºF
API Ratings (L Orifice - 2.853 in 2 (18.406 cm 2 ))
(37.8ºC)

Connection Flanged Ratings Standard Material of Construction Bellows

Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

in. mm in. mm R.F. or R.J. R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg

1905 3.00 76.2 4.00 101.6 150 150 285 19.65 185 12.75 80 5.51 - - 285 19.65 53 3.65 100 6.89

1906 3.00 76.2 4.00 101.6 300 150 285 19.65 285 19.65 285 19.65 - - 285 19.65 53 3.65 100 6.89

1910 4.00 101.6 6.00 152.4 300 150 740 51.02 615 42.40 410 28.26 - - 285 19.65 53 3.65 170 11.72

1912 4.00 101.6 6.00 152.4 600 150 1000 68.94 1000 68.94 825 56.88 - - 285 19.65 53 3.65 170 11.72

1914 4.00 101.6 6.00 152.4 900 150 1500 103.42 1500 103.42 1235 85.15 - - 285 19.65 53 3.65 170 11.72

1916 4.00 101.6 6.00 152.4 1500 150 1500 103.42 1500 103.42 1500 103.42 - - 285 19.65 53 3.65 170 11.72

1920 4.00 101.6 6.00 152.4 300 150 - - - - 510 35.16 215 14.82 285 19.65 53 3.65 170 11.72

1922 4.00 101.6 6.00 152.4 600 150 - - - - 1000 68.94 430 29.64 285 19.65 53 3.65 170 11.72

1924 4.00 101.6 6.00 152.4 900 150 - - - - 1500 103.42 650 44.81 285 19.65 53 3.65 170 11.72

1926 4.00 101.6 6.00 152.4 1500 150 - - - - 1500 103.42 1080 74.46 600 41.36 53 3.65 170 11.72

Pressure Temperature Ratings for L Orifice

Backpressure Ratings @ 100ºF
ASME Ratings (L Orifice - 3.317 in 2 (21.400 cm 2 ) Actual)
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve tional
-20 to 100ºF 450ºF 800ºF 1000ºF
Type Inlet Outlet Inlet Outlet LP HP
(-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

in. mm in. mm R.F. or R.J. R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg

1905 3.00 76.2 4.00 101.6 150 150 290 19.99 185 12.75 80 5.51 - - 290 19.99 53 3.65 290 19.99

1906 3.00 76.2 4.00 101.6 300 150 290 19.99 290 19.99 290 19.99 - - 290 19.99 53 3.65 290 19.99

1910 4.00 101.6 6.00 152.4 300 150 750 51.71 685 47.22 410 28.26 - - 290 19.99 53 3.65 290 19.99

1912 4.00 101.6 6.00 152.4 600 150 1500 103.42 1368 94.32 825 56.88 - - 290 19.99 53 3.65 290 19.99

1914 4.00 101.6 6.00 152.4 900 150 2250 155.13 2053 141.54 1235 85.15 - - 290 19.99 53 3.65 290 19.99

1916 4.00 101.6 6.00 152.4 1500 150 3000 206.84 3000 206.84 2055 141.68 - - 290 19.99 53 3.65 535 36.88

1920 4.00 101.6 6.00 152.4 300 150 - - - - 510 35.16 215 14.82 290 19.99 53 3.65 290 19.99

1922 4.00 101.6 6.00 152.4 600 150 - - - - 1015 69.98 430 29.64 290 19.99 53 3.65 290 19.99

1924 4.00 101.6 6.00 152.4 900 150 - - - - 1525 105.14 650 44.81 290 19.99 53 3.65 290 19.99

1926 4.00 101.6 6.00 152.4 1500 150 - - - - 2540 175.12 1080 74.46 290 19.99 53 3.65 535 36.88

76 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs 1926L
(801°F to 900 1920L 1922L 1924L
1000°F)
800
1906L 1916L
700

© 2021 Baker Hughes Company. All rights reserved.

1910L 1912 1914L
600

500 1905L

Alloy Steel
400 1906L
Springs
(-75°F up to
300
800°F)

200 1905L 1910L 1912L 1914L

100 1905L/L1
1906L/L1

INLET TEMPERATURE °F
0
1910L/L1 1912L/L1 1914L/L1
Pressure / Temperature

-100 1914L/L2

1905L/L2
1900 and 1900-30 Series, L Orifice - API Area: 2.853 in2. (18.406 cm2)

-200 1910L/L2
1906L/L2
Stainless 1912L/L2
Steel -300
Springs 1905L/L3 1910L/L3
1914L/L3
(-76°F to -400 1906L/L3 1912L/L3
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450

0 200 400 600 800 1000 1200 1400 1600

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 77

Pressure / Temperature
Pressure Temperature Ratings for M Orifice
Backpressure Ratings @ 100ºF
API Ratings (M Orifice - 3.600 in 2 (23.226 cm 2 ))
(37.8ºC)

Connection Flanged Ratings Standard Material of Construction Bellows

Conven-
-20 to 100ºF 450ºF 800ºF 1000ºF tional
Valve Inlet Outlet Inlet Outlet LP HP
(-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)
Type
R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 4.00 101.6 6.00 152.4 150 150 285 19.65 185 12.75 80 5.51 - - 285 19.65 66 4.55 80 5.51

1906 4.00 101.6 6.00 152.4 300 150 285 19.65 285 19.65 285 19.65 - - 285 19.65 66 4.55 80 5.51

1910 4.00 101.6 6.00 152.4 300 150 740 51.02 615 42.40 410 28.26 - - 285 19.65 66 4.55 160 11.03

1912 4.00 101.6 6.00 152.4 600 150 1100 75.84 1100 75.84 825 56.88 - - 285 19.65 66 4.55 160 11.03

1914 4.00 101.6 6.00 152.4 900 150 1100 75.84 1100 75.84 1100 75.84 - - 285 19.65 66 4.55 160 11.03

1920 4.00 101.6 6.00 152.4 300 150 - - - - 510 35.16 215 14.82 285 19.65 66 4.55 160 11.03

1922 4.00 101.6 6.00 152.4 600 150 - - - - 1000 68.94 430 29.64 285 19.65 66 4.55 160 11.03

1924 4.00 101.6 6.00 152.4 900 150 - - - - 1100 75.84 650 44.81 285 19.65 66 4.55 160 11.03

Pressure Temperature Ratings for M Orifice

Backpressure Ratings @ 100ºF
ASME Ratings (M Orifice - 4.186 in 2 (27.006 cm 2 ) Actual)
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 4.00 101.6 6.00 152.4 150 150 290 19.99 185 12.75 80 5.51 - - 290 19.99 66 4.55 290 19.99

1906 4.00 101.6 6.00 152.4 300 150 290 19.99 290 19.99 290 19.99 - - 290 19.99 66 4.55 290 19.99

1910 4.00 101.6 6.00 152.4 300 150 750 51.71 685 47.22 410 28.26 - - 290 19.99 66 4.55 290 19.99

1912 4.00 101.6 6.00 152.4 600 150 1500 103.42 1368 94.32 825 56.88 - - 290 19.99 66 4.55 290 19.99

1914 4.00 101.6 6.00 152.4 900 150 1600 110.31 1600 110.31 1235 85.15 - - 290 19.99 66 4.55 290 19.99

1920 4.00 101.6 6.00 152.4 300 150 - - - - 510 35.16 215 14.82 290 19.99 66 4.55 290 19.99

1922 4.00 101.6 6.00 152.4 600 150 - - - - 1015 69.98 430 29.64 290 19.99 66 4.55 290 19.99

1924 4.00 101.6 6.00 152.4 900 150 - - - - 1525 105.14 650 44.81 290 19.99 66 4.55 290 19.99

78 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs
(801°F to 900 1920M 1922M 1924M
1000°F)
800
1906M 1914M
700

© 2021 Baker Hughes Company. All rights reserved.

1910M 1912M
600
1905M
500
Alloy Steel
400 1906M
Springs
(-75°F up to
300
800°F)

200 1905M 1910M 1912M

100 1905M/L1
1906M/L1

INLET TEMPERATURE °F
0
1910M/L1 1912M/L1
Pressure / Temperature

-100 1910M/L2 1912M/L2

-200 1905M/L2
1900 and 1900-30 Series, M Orifice - API Area: 3.600 in2. (23.226 cm2)

1906M/L2
Stainless
Steel -300
1905M/L3
Springs 1910M/L3 1912M/L3
(-76°F to -400 1906M/L3
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450
0 200 400 600 800 1000 1200

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 79

Pressure / Temperature
Pressure Temperature Ratings for N Orifice
Backpressure Ratings @ 100ºF
API Ratings (N Orifice - 4.340 in 2 (28.000 cm 2 ))
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 4.00 101.6 6.00 152.4 150 150 285 19.65 185 12.75 80 5.51 - - 285 19.65 73 5.03 80 5.51

1906 4.00 101.6 6.00 152.4 300 150 285 19.65 285 19.65 285 19.65 - - 285 19.65 73 5.03 80 5.51

1910 4.00 101.6 6.00 152.4 300 150 740 51.02 615 42.40 410 28.26 - - 285 19.65 73 5.03 160 11.03

1912 4.00 101.6 6.00 152.4 600 150 1000 68.94 1000 68.94 825 56.88 - - 285 19.65 73 5.03 160 11.03

1914 4.00 101.6 6.00 152.4 900 150 1000 68.94 1000 68.94 1000 68.94 - - 285 19.65 73 5.03 160 11.03

1920 4.00 101.6 6.00 152.4 300 150 - - - - 510 35.16 215 14.82 285 19.65 73 5.03 160 11.03

1922 4.00 101.6 6.00 152.4 600 150 - - - - 1000 68.94 430 29.64 285 19.65 73 5.03 160 11.03

1924 4.00 101.6 6.00 152.4 900 150 - - - - 1000 68.94 650 44.81 285 19.65 73 5.03 160 11.03

Pressure Temperature Ratings for N Orifice

Backpressure Ratings @ 100ºF
ASME Ratings (N Orifice - 5.047 in 2 (32.561 cm 2 ) Actual)
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 4.00 101.6 6.00 152.4 150 150 290 19.99 185 12.75 80 5.51 - - 290 19.99 73 5.03 290 19.99

1906 4.00 101.6 6.00 152.4 300 150 290 19.99 290 19.99 290 19.99 - - 290 19.99 73 5.03 290 19.99

1910 4.00 101.6 6.00 152.4 300 150 750 51.71 685 47.22 410 28.26 - - 290 19.99 73 5.03 290 19.99

1912 4.00 101.6 6.00 152.4 600 150 1500 103.42 1368 94.32 825 56.88 - - 290 19.99 73 5.03 290 19.99

1914 4.00 101.6 6.00 152.4 900 150 1600 110.31 1600 110.31 1235 85.15 - - 290 19.99 73 5.03 290 19.99

1920 4.00 101.6 6.00 152.4 300 150 - - - - 510 35.16 215 14.82 290 19.99 73 5.03 290 19.99

1922 4.00 101.6 6.00 152.4 600 150 - - - - 1015 69.98 430 29.64 290 19.99 73 5.03 290 19.99

1924 4.00 101.6 6.00 152.4 900 150 - - - - 1525 105.14 650 44.81 290 19.99 73 5.03 290 19.99

80 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs
(801°F to 900 1920N 1922N 1924N
1000°F)
800 1914N
1906N
700

© 2021 Baker Hughes Company. All rights reserved.

1910N 1912N
600
1905N
500
Alloy Steel
400 1906N
Springs
(-75°F up to
300
800°F)

200 1905N 1910N 1912N

100
1905N/L1
1906N/L1

INLET TEMPERATURE °F
0
1910N/L1 1912N/L1
Pressure / Temperature

-100 1910N/L2 1912N/L2

-200 1905N/L2
1900 and 1900-30 Series, N Orifice - API Area: 4.340 in2. (28.000 cm2)

1906N/L2
Stainless
Steel -300
1905N/L3
Springs 1910N/L3 1912N/L3
(-76°F to -400 1906N/L3
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450
0 200 400 600 800 1000

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 81

Pressure / Temperature
Pressure Temperature Ratings for P Orifice
Backpressure Ratings @ 100ºF
API Ratings (P Orifice - 6.380 in 2 (41.161 cm 2 ))
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 4.00 101.6 6.00 152.4 150 150 285 19.65 185 12.75 80 5.51 - - 285 19.65 56 3.86 80 5.51

1906 4.00 101.6 6.00 152.4 300 150 285 19.65 285 19.65 285 19.65 - - 285 19.65 56 3.86 80 5.51

1910 4.00 101.6 6.00 152.4 300 150 525 36.19 525 36.19 410 28.26 - - 285 19.65 56 3.86 150 10.34

1912 4.00 101.6 6.00 152.4 600 150 1000 68.94 1000 68.94 825 56.88 - - 285 19.65 56 3.86 150 10.34

1914 4.00 101.6 6.00 152.4 900 150 1000 68.94 1000 68.94 1000 68.94 - - 285 19.65 56 3.86 150 10.34

1920 4.00 101.6 6.00 152.4 300 150 - - - - 510 35.16 215 14.82 285 19.65 56 3.86 160 11.03

1923 4.00 101.6 6.00 152.4 600 150 - - - - 1000 68.94 430 29.64 285 19.65 56 3.86 160 11.03

1924 4.00 101.6 6.00 152.4 900 150 - - - - 1000 68.94 650 44.81 285 19.65 56 3.86 160 11.03

Pressure Temperature Ratings for P Orifice

Backpressure Ratings @ 100ºF
ASME Ratings (P Orifice - 7.417 in 2 (47.852 cm 2 ) Actual)
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 4.00 101.6 6.00 152.4 150 150 290 19.99 185 12.75 80 5.51 - - 290 19.99 56 3.86 290 19.99

1906 4.00 101.6 6.00 152.4 300 150 290 19.99 290 19.99 290 19.99 - - 290 19.99 56 3.86 290 19.99

1910 4.00 101.6 6.00 152.4 300 150 750 51.71 685 47.22 410 28.26 - - 290 19.99 56 3.86 290 19.99

1912 4.00 101.6 6.00 152.4 600 150 1500 103.42 1368 94.32 825 56.88 - - 290 19.99 56 3.86 290 19.99

1914 4.00 101.6 6.00 152.4 900 150 1700 117.21 1700 117.21 1235 85.15 - - 290 19.99 56 3.86 290 19.99

1920 4.00 101.6 6.00 152.4 300 150 - - - - 510 35.16 215 14.82 290 19.99 56 3.86 290 19.99

1923 4.00 101.6 6.00 152.4 600 150 - - - - 1015 69.98 430 29.64 290 19.99 56 3.86 290 19.99

1924 4.00 101.6 6.00 152.4 900 150 - - - - 1525 105.14 650 44.81 290 19.99 56 3.86 290 19.99

82 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs
(801°F to 900 1920P 1923P 1924P
1000°F)
800 1914P
1906P
700

© 2021 Baker Hughes Company. All rights reserved.

1910P 1912P
600
1905P
500
Alloy Steel
400 1906P
Springs
(-75°F up to
300
800°F)

200 1905P 1910P 1912P

100 1905P/L1
1906P/L1

INLET TEMPERATURE °F
0
1910P/L1 1912P/L1
Pressure / Temperature

-100 1912P/L2

1905P/L2
1900 and 1900-30 Series, P Orifice - API Area: 6.380 in2. (41.161 cm2)

-200 1910P/L2
1906P/L2
Stainless
-300 1910P/L3
Steel
1905P/L3
Springs 1912P/L3
(-76°F to -400 1906P/L3
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450
0 200 400 600 800 1000

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 83

Pressure / Temperature
Pressure Temperature Ratings for Q Orifice
Backpressure Ratings @ 100ºF
API Ratings (Q Orifice - 11.050 in 2 (71.290 cm 2 ))
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings
Conven-
Valve tional
-20 to 100ºF 450ºF 800ºF 1000ºF
Type Inlet Outlet Inlet Outlet LP HP
(-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

in. mm in. mm R.F. or R.J. R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg

1905 6.00 152.4 8.00 203.2 150 150 165 11.37 165 11.37 80 5.51 - - 115 7.93 52 3.58 70 4.83

1906 6.00 152.4 8.00 203.2 300 150 165 11.37 165 11.37 165 11.37 - - 115 7.93 52 3.58 70 4.83

1910 6.00 152.4 8.00 203.2 300 150 300 20.68 300 20.68 300 20.68 - - 115 7.93 52 3.58 115 7.93

1912 6.00 152.4 8.00 203.2 600 150 600 41.36 600 41.36 600 41.36 - - 115 7.93 52 3.58 115 7.93

1920 6.00 152.4 8.00 203.2 300 150 - - - - 165 11.37 165 11.37 115 7.93 52 3.58 115 7.93

1922 6.00 152.4 8.00 203.2 600 150 - - - - 600 41.36 430 29.64 115 7.93 52 3.58 115 7.93

Pressure Temperature Ratings for Q Orifice

Backpressure Ratings @ 100ºF
ASME Ratings (Q Orifice - 12.850 in 2 (82.903 cm 2 ) Actual)
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings
Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 6.00 152.4 8.00 203.2 150 150 290 19.99 185 12.75 80 5.51 - - 290 19.99 52 3.58 205 14.13

1906 6.00 152.4 8.00 203.2 300 150 290 19.99 290 19.99 290 19.99 - - 290 19.99 52 3.58 205 14.13

1910 6.00 152.4 8.00 203.2 300 150 650 44.81 650 44.81 410 28.26 - - 290 19.99 52 3.58 205 14.13

1912 6.00 152.4 8.00 203.2 600 150 900 62.05 900 62.05 825 56.88 - - 290 19.99 52 3.58 205 14.13

1920 6.00 152.4 8.00 203.2 300 150 - - - - 510 35.16 215 14.82 290 19.99 52 3.58 205 14.13

1922 6.00 152.4 8.00 203.2 600 150 - - - - 900 62.05 430 29.64 290 19.99 52 3.58 205 14.13

84 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs
(801°F to 900 1920Q 1922Q
1000°F)
800
1906Q

700

© 2021 Baker Hughes Company. All rights reserved.

1905Q 1910Q 1912Q
600 1906Q

500
Alloy Steel
400
Springs
(-75°F up to 1905Q
300
800°F) 1906Q
1910Q 1912Q
200

100 1905Q/L1
1906Q/L1

INLET TEMPERATURE °F
0
1910Q/L1 1912Q/L1
Pressure / Temperature

-100 1910Q/L2 1912Q/L2

-200 1905Q/L2
1900 and 1900-30 Series, Q Orifice - API Area: 11.050 in2. (71.290 cm2)

1906Q/L2
Stainless
Steel -300 1910Q/L3
1905Q/L3 1912Q/L3
Springs
(-76°F to -400 1906Q/L3
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450
0 100 200 300 400 500 600

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 85

Pressure / Temperature
Pressure Temperature Ratings for R Orifice
Backpressure Ratings @ 100ºF
API Ratings (R Orifice - 16.000 in 2 (103.226 cm 2 ))
(37.8ºC)

Flanged Rat-
Connection Standard Material of Construction Bellows
ings
Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 6.00 152.4 8.00 203.2 150 150 100 6.89 100 6.89 80 5.51 - - 60 4.13 52 3.58 60 4.13

1906 6.00 152.4 8.00 203.2 300 150 100 6.89 100 6.89 100 6.89 - - 60 4.13 52 3.58 60 4.13

1910 6.00 152.4 10.00 254 300 150 230 15.85 230 15.85 230 15.85 - - 100 6.89 52 3.58 100 6.89

1912 6.00 152.4 10.00 254 600 150 300 20.68 300 20.68 300 20.68 - - 100 6.89 52 3.58 100 6.89

1920 6.00 152.4 8.00 203.2 300 150 - - - - 100 6.89 100 6.89 100 6.89 52 3.58 100 6.89

1922 6.00 152.4 10.00 254 600 150 - - - - 300 20.68 300 20.68 100 6.89 52 3.58 100 6.89

Pressure Temperature Ratings for R Orifice

Backpressure Ratings @ 100ºF
ASME Ratings (R Orifice - 18.600 in 2 (120.000 cm 2 ) Actual)
(37.8ºC)

Flanged Rat-
Connection Standard Material of Construction Bellows
ings
Conven-
Valve tional
-20 to 100ºF 450ºF 800ºF 1000ºF
Type Inlet Outlet Inlet Outlet LP HP
(-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

in. mm in. mm R.F. or R.J. R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg

1905 6.00 152.4 8.00 203.2 150 150 150 10.34 150 10.34 80 5.51 - - 150 10.34 52 3.58 145 9.99

1906 6.00 152.4 8.00 203.2 300 150 150 10.34 150 10.34 150 10.34 - - 150 10.34 52 3.58 145 9.99

1910 6.00 152.4 10.00 254 300 150 450 31.02 450 31.02 410 28.26 - - 290 19.99 52 3.58 145 9.99

1912 6.00 152.4 10.00 254 600 150 650 44.81 650 44.81 650 44.81 - - 290 19.99 52 3.58 145 9.99

1920 6.00 152.4 8.00 203.2 300 150 - - - - 450 31.02 215 14.82 290 19.99 52 3.58 145 9.99

1922 6.00 152.4 10.00 254 600 150 - - - - 650 44.81 430 29.64 290 19.99 52 3.58 145 9.99

86 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs
(801°F to 900 1920R 1922R
1000°F)
800
1906R

700

© 2021 Baker Hughes Company. All rights reserved.

1905R
1910R 1912R
600 1906R

500
Alloy Steel
400
Springs
(-75°F up to
300
800°F)
1905R
200 1910R 1912R
1906R

100
1905R/L1
1906R/L1

INLET TEMPERATURE °F
0
1910R/L1 1912R/L1
Pressure / Temperature

-100 1910R/L2 1912R/L2

-200 1905R/L2
1906R/L2
1900 and 1900-30 Series, R Orifice - API Area: 16.000 in2. (103.226 cm2)

Stainless
Steel -300 1910R/L3 1912R/L3
Springs 1905R/L3
(-76°F to -400 1906R/L3
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450
0 50 100 150 200 250 300

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 87

Pressure / Temperature
Pressure Temperature Ratings for T Orifice
Backpressure Ratings @ 100ºF
API Ratings (T Orifice - 26.000 in 2 (167.742 cm 2 ))
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings
Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 8.00 203.2 10.00 254 150 150 65 4.48 65 4.48 65 4.48 - - 30 2.07 41 2.82 30 2.07

1906 8.00 203.2 10.00 254 300 150 65 4.48 65 4.48 65 4.48 - - 60 4.13 41 2.82 30 2.07

1910 8.00 203.2 10.00 254 300 150 300 20.68 300 20.68 300 20.68 - - 100 6.89 41 2.82 100 6.89

1920 8.00 203.2 10.00 254 300 150 - - - - 300 20.68 215 14.82 100 6.89 41 2.82 100 6.89

Pressure Temperature Ratings for T Orifice

Backpressure Ratings @ 100ºF
ASME Ratings (T Orifice - 30.210 in 2 (194.903 cm 2 ) Actual)
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings
Conven-
Valve -20 o 100ºF 450ºF 800ºF 1000ºF tional
Inlet Oulet Inlet Outlet LP HP
Type (-28.9 o 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 8.00 203.2 10.00 254 150 150 125 8.61 125 8.61 80 5.51 - - 125 8.61 41 2.82 125 8.61

1906 8.00 203.2 10.00 254 300 150 125 8.61 125 8.61 125 8.61 - - 125 8.61 41 2.82 125 8.61

1910 8.00 203.2 10.00 254 300 150 360 24.82 360 24.82 360 24.82 - - 290 19.99 41 2.82 145 9.99

1912(1) 8.00 203.2 10.00 254 600 150 360 24.82 360 24.82 360 24.82 - - 290 19.99 41 2.82 145 9.99

1920 8.00 203.2 10.00 254 300 150 - - - - 360 24.82 215 14.82 290 19.99 41 2.82 145 9.99

1922(1) 8.00 203.2 10.00 254 600 150 - - - - 360 24.82 430 29.64 290 19.99 41 2.82 145 9.99

1. This valve is not listed in API 526 standard.

88 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 Tungsten
or Inconel 1,000
Steel Springs
(801°F to 900 1920T
1000°F)
800

700

© 2021 Baker Hughes Company. All rights reserved.

1905T 1910T
600 1906T

500
Alloy Steel
400
Springs
(-75°F up to
300
800°F)
1905T
200 1910T
1906T

100
1905T/L1
1906T/L1

INLET TEMPERATURE °F
0
1910T/L1
Pressure / Temperature

-100 1910T/L2

-200 1905T/L2
1906T/L2
1900 and 1900-30 Series, T Orifice - API Area: 26.000 in2. (167.742 cm2)

Stainless
Steel -300
Springs 1905T/L3
1910T/L3
(-76°F to -400 1906T/L3
-450°F)
Selection Chart for Vapors, Gases and Liquids

-450
0 50 100 150 200 250 300

SET PRESSURE - lbs./Sq. in.

Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 89

Pressure / Temperature
Pressure Temperature Ratings for U Orifice(1)
Backpressure Ratings @ 100ºF
ASME Ratings (U Orifice - 35.099 in 2 (225.445 cm 2 ) Actual)
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 8.00 203.2 10.00 254 150 150 125 8.61 125 8.61 80 5.51 - - 125 8.61 41 2.82 125 8.61

1906 8.00 203.2 10.00 254 300 150 125 8.61 125 8.61 125 8.61 - - 125 8.61 41 2.82 125 8.61

1910 8.00 203.2 10.00 254 300 150 360 24.82 360 24.82 360 24.82 - - 290 19.99 41 2.82 145 9.99

1920 8.00 203.2 10.00 254 300 150 - - - - 360 24.82 215 14.82 290 19.99 41 2.82 145 9.99

Pressure Temperature Ratings for V Orifice(1)

Backpressure Ratings @ 100ºF
ASME Ratings (V Orifice - 50.260 in 2 (324.257 cm 2 ) Actual)
(37.8ºC)

Flanged
Connection Standard Material of Construction Bellows
Ratings Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

R.F. or
in. mm in. mm R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg
R.J.

1905 10.00 254 14.00 355.6 150 150 154 10.61 154 10.61 80 5.51 - - 154 10.61 - - 72 4.96

1906 10.00 254 14.00 355.6 300 150 154 10.61 154 10.61 154 10.61 - - 154 10.61 - - 72 4.96

1910 10.00 254 14.00 355.6 300 150 300 20.68 300 20.68 300 20.68 - - 290 19.99 - - 72 4.96

1920 10.00 254 14.00 355.6 300 150 - - - - 300 20.68 154 10.61 290 19.99 - - 72 4.96

Pressure Temperature Ratings for W Orifice(1)

Backpressure Ratings @ 100ºF
ASME Ratings (W Orifice - 78.996 in 2 (509.651 cm 2 ) Actual)
(37.8ºC)

Connection Flanged Ratings Standard Material of Construction Bellows

Conven-
Valve -20 to 100ºF 450ºF 800ºF 1000ºF tional
Inlet Outlet Inlet Outlet LP HP
Type (-28.9 to 37.8ºC) (232.2ºC) (426.7ºC) (537.8ºC)

in. mm in. mm R.F. or R.J. R.F. psig barg psig barg psig barg psig barg psig barg psig barg psig barg

1905 12.00 304.8 16.00 406.4 150 150 154 10.61 154 10.61 80 5.51 - - 154 10.61 - - 72 4.96

1906 12.00 304.8 16.00 406.4 300 150 154 10.61 154 10.61 154 10.61 - - 154 10.61 - - 72 4.96

1910 12.00 304.8 16.00 406.4 300 150 300 20.68 300 20.68 300 20.68 - - 290 19.99 - - 72 4.96

1920 12.00 304.8 16.00 406.4 300 150 - - - - 300 20.68 154 10.61 290 19.99 - - 72 4.96

1. This valve is not listed in API 526 standard.

90 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 1900 GS/1900 DM Capacities
Valve Capacity for ASME B&PV Code Section VIII, for Air (1) & (2)
Based at 10% overpressure or 3 psig (0.21 barg) , whichever is greater, showing 90% actual capacity in accordance with latest ASME Code
requirements.
Units of cubic feet of air per minute are at a temperature of 60°F
Orifice
Designation D E F G H J K L
in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2
Orifice Area
0.128 0.825 0.228 1.470 0.357 2.302 0.585 3.774 0.913 5.888 1.496 9.652 2.138 13.794 3.317 21.400
Set Pressure Orifice Capacity
m 3/ m 3/ m 3/ m 3/ m 3/ m 3/ m 3/ m 3/
psig barg ft3/min ft3/min ft3/min ft3/min ft3/min ft3/min ft3/min ft3/min
min min min min min min min min
15 1.03 65 1 116 3 183 5 300 8 468 13 767 21 1097 31 1702 48
20 1.37 75 2 134 3 211 5 346 9 539 15 885 25 1264 35 1962 55
30 2.06 95 2 170 4 267 7 437 12 683 19 1119 31 1600 45 2483 70
40 2.75 117 3 209 5 328 9 538 15 840 23 1378 39 1969 55 3055 86
50 3.44 139 3 249 7 390 11 639 18 998 28 1636 46 2338 66 3628 102
60 4.13 161 4 288 8 451 12 740 20 1155 32 1894 53 2707 76 4200 118
70 4.82 184 5 327 9 513 14 841 23 1313 37 2152 60 3076 87 4773 135
80 5.51 206 5 367 10 575 16 942 26 1470 41 2411 68 3445 97 5346 151
90 6.20 228 6 406 11 636 18 1043 29 1628 46 2669 75 3814 108 5918 167
100 6.89 250 7 445 12 698 19 1144 32 1786 50 2927 82 4183 118 6491 183
120 8.27 294 8 524 14 821 23 1346 38 2101 59 3444 97 4922 139 7636 216
140 9.65 338 9 603 17 944 26 1548 43 2416 68 3960 112 5660 160 8781 248
160 11.03 382 10 682 19 1067 30 1750 49 2731 77 4477 126 6398 181 9926 281
180 12.41 426 12 760 21 1190 33 1952 55 3046 86 4993 141 7136 202 11072 313
200 13.78 471 13 839 23 1314 37 2154 60 3361 95 5510 156 7874 222 12217 345
220 15.16 515 14 918 25 1437 40 2356 66 3676 104 6026 170 8612 243 13362 378
240 16.54 559 15 996 28 1560 44 2558 72 3991 113 6543 185 9351 264 14507 410
260 17.92 603 17 1075 30 1683 47 2760 78 4307 121 7059 199 10089 285 15652 443
280 19.30 647 18 1154 32 1806 51 2962 83 4622 130 7576 214 10827 306 16798 475
300 20.68 691 19 1232 34 1930 54 3163 89 4937 139 8092 229 11565 327 17943 508
320 22.06 736 20 1311 37 2053 58 3365 95 5252 148 8609 243 12303 348 19088 540
340 23.44 780 22 1390 39 2176 61 3567 101 5567 157 9125 258 13041 369 20233 572
360 24.82 824 23 1468 41 2299 65 3769 106 5882 166 9642 273 13779 390 21378 605
380 26.20 868 24 1547 43 2422 68 3971 112 6197 175 10158 287 14518 411 22524 637
400 27.57 912 25 1626 46 2546 72 4173 118 6512 184 10675 302 15256 432 23669 670
420 28.95 956 27 1704 48 2669 75 4375 123 6827 193 11191 316 15994 452 24814 702
440 30.33 1000 28 1783 50 2792 79 4577 129 7143 202 11708 331 16732 473 25959 735
460 31.71 1045 29 1862 52 2915 82 4779 135 7458 211 12224 346 17470 494 27104 767
480 33.09 1089 30 1940 54 3038 86 4981 141 7773 220 12741 360 18208 515 28250 799
500 34.47 1133 32 2019 57 3161 89 5183 146 8088 229 13257 375 18946 536 29395 832
600 41.36 1354 38 2413 68 3777 106 6193 175 9663 273 15840 448 22637 641 35121 994
700 48.26 1575 44 2806 79 4393 124 7202 203 11239 318 18422 521 26328 745 40847 1156
800 55.15 1795 50 3199 90 5009 141 8212 232 12815 362 21004 594 30019 850 46573 1318
900 62.05 2016 57 3593 101 5625 159 9222 261 14390 407 23587 667 33709 954 52299 1480
1000 68.94 2237 63 3986 112 6241 176 10231 289 15966 452 26169 741 37400 1059 58025 1643
1100 75.84 2458 69 4380 124 6857 194 11241 318 17541 496 28752 814 41091 1163 63751 1805
1200 82.73 2678 75 4773 135 7473 211 12251 346 19117 541 31334 887 44782 1268 69477 1967
1300 89.63 2899 82 5166 146 8089 229 13260 375 20692 585 33917 960 48472 1372 75203 2129
1400 96.52 3120 88 5560 157 8705 246 14270 404 22268 630 36499 1033 52163 1477 80929 2291
1500 103.42 3341 94 5953 168 9321 263 15280 432 23843 675 39082 1106 55854 1581 86655 2453
2000 137.89 4445 125 7920 224 12400 351 20328 575 31721 898 51994 1472 74308 2104 — —
2500 172.36 5549 157 9887 279 15480 438 25377 718 39599 1121 64907 1837 — — — —
3000 206.84 6653 188 11855 335 18560 525 30425 861 47477 1344 77819 2203 — — — —
4000 275.79 8861 250 15789 447 24719 699 — — — — — — — — — —
5000 344.73 11068 313 19723 558 30878 874 — — — — — — — — — —
6000 413.68 13276 375 23657 669 — — — — — — — — — — — —

1. For temperatures other than 60°F (15.6°C) and specific gravities other than air, use formula sizing method.
2. Sizing: Valves may be sized for either ASME or API applications

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 91
1900 GS/1900 DM Capacities
Valve Capacity for ASME B&PV Code Section VIII, for Air (1) & (2)
Based at 10% overpressure or 3 psig (0.21 barg), whichever is greater, showing 90% actual capacity in accordance with latest ASME Code requirements.
Units of cubic feet of air per minute are at a temperature of 60°F
Orifice
Designation M N P Q R T U V W
in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2
Orifice Area
4.186 27.006 5.047 32.561 7.417 47.852 12.850 82.903 18.600 120.000 30.210 194.903 35.010 225.871 50.260 324.257 78.996 509.651
Set Pressure Orifice Capacity
ft3/ m 3/ ft3/ m 3/ ft3/ m 3/ m 3/ m 3/ m 3/
psig barg ft3/min ft3/min ft3/min m3/min ft3/min ft3/min m3/min ft3/min m3/min
min min min min min min min min min
15 1.03 2148 60 2589 73 3806 107 6594 186 9544 270 15502 438 17966 508 25791 730 40538 1147
20 1.37 2476 70 2985 84 4388 124 7602 215 11004 311 17873 506 20713 586 29735 842 46736 1323
30 2.06 3133 88 3778 106 5552 157 9619 272 13923 394 22614 640 26207 742 37623 1065 59133 1674
40 2.75 3856 109 4649 131 6832 193 11837 335 17134 485 27829 788 32251 913 46299 1311 72770 2060
50 3.44 4578 129 5520 156 8112 229 14055 397 20345 576 33044 935 38294 1084 54975 1556 86407 2446
60 4.13 5301 150 6391 180 9393 265 16273 460 23555 667 38259 1083 44338 1255 63651 1802 100044 2832
70 4.82 6023 170 7263 205 10673 302 18492 523 26766 757 43474 1231 50381 1426 72327 2048 113680 3219
80 5.51 6746 191 8134 230 11953 338 20710 586 29977 848 48689 1378 56425 1597 81003 2293 127317 3605
90 6.20 7469 211 9005 254 13234 374 22928 649 33188 939 53904 1526 62469 1768 89680 2539 140954 3991
100 6.89 8191 231 9876 279 14514 410 25146 712 36399 1030 59119 1674 68512 1940 98356 2785 154591 4377
120 8.27 9637 272 11619 329 17075 483 29583 837 42820 1212 69549 1969 80600 2282 115708 3276 181864 5149
140 9.65 11082 313 13361 378 19636 556 34019 963 49242 1394 79979 2264 92687 2624 133061 3767 209138 5922
160 11.03 12527 354 15104 427 22196 628 38456 1088 55664 1576 90409 2560 104774 2966 150413 4259 236411 6694
180 12.41 13972 395 16846 477 24757 701 42892 1214 62086 1758 100839 2855 116861 3309 167765 4750 263685 7466
200 13.78 15417 436 18589 526 27318 773 47329 1340 68507 1939 111269 3150 128949 3651 185118 5241 290958 8239
220 15.16 16863 477 20331 575 29879 846 51765 1465 74929 2121 121699 3446 141036 3993 202470 5733 318232 9011
240 16.54 18308 518 22074 625 32439 918 56202 1591 81351 2303 132129 3741 153123 4335 219822 6224 345505 9783
260 17.92 19753 559 23816 674 35000 991 60638 1717 87772 2485 142559 4036 165210 4678 237175 6716 372779 10555
280 19.30 21198 600 25559 723 37561 1063 65075 1842 94194 2667 152990 4332 177298 5020 254527 7207 400052 11328
300 20.68 22644 641 27301 773 40122 1136 69511 1968 100616 2849 163420 4627 189385 5362 271879 7698 427326 12100
320 22.06 24089 682 29044 822 42682 1208 73948 2093 — — — — — — — — — —
340 23.44 25534 723 30786 871 45243 1281 78384 2219 — — — — — — — — — —
360 24.82 26979 763 32529 921 47804 1353 82821 2345 — — — — — — — — — —
380 26.20 28424 804 34271 970 50364 1426 87257 2470 — — — — — — — — — —
400 27.57 29870 845 36014 1019 52925 1498 91694 2596 — — — — — — — — — —
420 28.95 31315 886 37756 1069 55486 1571 96130 2722 — — — — — — — — — —
440 30.33 32760 927 39498 1118 58047 1643 100567 2847 — — — — — — — — — —
460 31.71 34205 968 41241 1167 60607 1716 105003 2973 — — — — — — — — — —
480 33.09 35651 1009 42983 1217 63168 1788 109440 3098 — — — — — — — — — —
500 34.47 37096 1050 44726 1266 65729 1861 113876 3224 — — — — — — — — — —
600 41.36 44322 1255 53438 1513 78533 2223 136058 3852 — — — — — — — — — —
700 48.26 51548 1459 62151 1759 91336 2586 — — — — — — — — — — — —
800 55.15 58774 1664 70863 2006 104140 2948 — — — — — — — — — — — —
900 62.05 66000 1868 79576 2253 116944 3311 — — — — — — — — — — — —
1000 68.94 73226 2073 88288 2500 129747 3674 — — — — — — — — — — — —
1100 75.84 80453 2278 — — — — — — — — — — — — — — — —
1200 82.73 — — — — — — — — — — — — — — — — — —
1300 89.63 — — — — — — — — — — — — — — — — — —
1400 96.52 — — — — — — — — — — — — — — — — — —
1500 103.42 — — — — — — — — — — — — — — — — — —
2000 137.89 — — — — — — — — — — — — — — — — — —
2500 172.36 — — — — — — — — — — — — — — — — — —
3000 206.84 — — — — — — — — — — — — — — — — — —
4000 275.79 — — — — — — — — — — — — — — — — — —
5000 344.73 — — — — — — — — — — — — — — — — — —
6000 413.68 — — — — — — — — — — — — — — — — — —

1. For temperatures other than 60°F (15.6°C) and specific gravities other than air, use formula sizing method.
2. Sizing: Valves may be sized for either ASME or API applications.

92 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 1900 TD Capacities
Valve Capacity for ASME B&PV Code Section VIII, for Saturated Steam (1) & (4)
Based on Set Pressure plus 10% overpressure or 3 psig (0.21 barg), whichever is greater showing 90% of actual capacity in
accordance with latest ASME Code requirements.
Orifice
Designation D E F G H J K L
in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2
Orifice Area
0.128 0.825 0.228 1.470 0.357 2.302 0.585 3.774 0.913 5.888 1.496 9.652 2.138 13.794 3.317 21.400
Set Pressure Orifice Capacity
psig barg lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr
15 1.03 184 83 328 148 513 232 842 381 1314 596 2154 977 3078 1396 4776 2166
20 1.37 212 96 378 171 592 268 970 439 1515 687 2483 1126 3549 1609 5506 2497
30 2.06 268 121 478 216 749 339 1228 557 1916 869 3142 1425 4490 2036 6966 3159
40 2.75 330 149 589 267 922 418 1511 685 2359 1070 3866 1753 5526 2506 8573 3888
50 3.44 392 177 699 317 1095 496 1795 814 2801 1270 4591 2082 6561 2976 10180 4617
60 4.13 454 205 809 366 1267 574 2078 942 3243 1471 5315 2410 7597 3445 11786 5346
70 4.82 516 234 920 417 1440 653 2361 1070 3685 1671 6040 2739 8632 3915 13393 6074
80 5.51 578 262 1030 467 1613 731 2644 1199 4127 1871 6765 3068 9668 4385 14999 6803
90 6.20 640 290 1140 517 1786 810 2928 1328 4569 2072 7489 3396 10703 4854 16606 7532
100 6.89 702 318 1251 567 1959 888 3211 1456 5011 2272 8214 3725 11739 5324 18213 8261
120 8.27 826 374 1472 667 2304 1045 3778 1713 5895 2673 9663 4383 13810 6264 21426 9718
140 9.65 950 430 1692 767 2650 1202 4344 1970 6779 3074 11112 5040 15881 7203 24639 11176
160 11.03 1073 486 1913 867 2996 1358 4911 2227 7663 3475 12561 5697 17952 8142 27852 12633
180 12.41 1197 542 2134 967 3341 1515 5478 2484 8548 3877 14011 6355 20023 9082 31066 14091
200 13.78 1321 599 2355 1068 3687 1672 6044 2741 9432 4278 15460 7012 22095 10022 34279 15548
220 15.16 1445 655 2575 1168 4032 1828 6611 2998 10316 4679 16909 7669 24166 10961 37492 17006
240 16.54 1569 711 2796 1268 4378 1985 7177 3255 11200 5080 18358 8327 26237 11900 40705 18463
260 17.92 1693 767 3017 1368 4724 2142 7744 3512 12084 5481 19807 8984 28308 12840 43918 19920
280 19.30 1817 824 3238 1468 5069 2299 8311 3769 12968 5882 21257 9642 30379 13779 47132 21378
300 20.68 1941 880 3459 1568 5415 2456 8877 4026 13852 6283 22706 10299 32450 14719 50345 22836
320 22.06 2065 936 3679 1668 5761 2613 9444 4283 14737 6684 24155 10956 34521 15658 53558 24293
340 23.44 2189 992 3900 1769 6106 2769 10010 4540 15621 7085 25604 11613 36592 16597 56771 25750
360 24.82 2312 1048 4121 1869 6452 2926 10577 4797 16505 7486 27053 12271 38663 17537 59985 27208
380 26.20 2436 1104 4342 1969 6798 3083 11144 5054 17389 7887 28503 12928 40735 18477 63198 28666
400 27.57 2560 1161 4562 2069 7143 3240 11710 5311 18273 8288 29952 13585 42806 19416 66411 30123
420 28.95 2684 1217 4783 2169 7489 3396 12277 5568 19157 8689 31401 14243 44877 20355 69624 31580
440 30.33 2808 1273 5004 2269 7834 3553 12843 5825 20041 9090 32850 14900 46948 21295 72838 33038
460 31.71 2932 1329 5225 2370 8180 3710 13410 6082 20926 9491 34299 15557 49019 22234 76051 34496
480 33.09 3056 1386 5445 2469 8526 3867 13977 6339 21810 9892 35749 16215 51090 23174 79264 35953
500 34.47 3180 1442 5666 2570 8871 4023 14543 6596 22694 10293 37198 16872 53161 24113 82477 37410
600 41.36 3799 1723 6770 3070 10600 4808 17376 7881 27115 12299 44444 20159 63517 28810 98543 44698
700 48.26 4419 2004 7874 3571 12328 5591 20209 9166 31535 14304 51690 23446 73872 33507 114609 51985
800 55.15 5038 2285 8978 4072 14056 6375 23042 10451 35956 16309 58936 26732 84228 38205 130676 59273
900 62.05 5658 2566 10082 4573 15784 7159 25875 11736 40377 18314 66182 30019 94583 42902 146742 66561
1000 68.94 6277 2847 11186 5073 17512 7943 28708 13021 44798 20320 73428 33306 104939 47599 162808 73848
1100 75.84 6897 3128 12289 5574 19241 8727 31541 14306 49218 22324 80674 36593 115295 52296 178874 81135
1200 82.73 7516 3409 13393 6074 20969 9511 34374 15591 53639 24330 87920 39879 125650 56993 194940 88423
1300 89.63 8136 3690 14497 6575 22697 10295 37207 16876 58060 26335 95166 43166 136006 61691 211006 95710
1400 96.52 8755 3971 15601 7076 24425 11078 40040 18161 62481 28340 102412 46453 146361 66388 227072 102998
1423(2) 981.33 8898 4036 15855 7191 24823 11259 40692 18457 63497 28801 104078 47208 148743 67468 230768 104674
1500 103.42 9420 4272 16785 7613 26279 11919 43079 19540 67222 30491 110183 49978 157468 71426 244304 110814
2000 137.89 13024 5907 23207 10526 36334 16480 59562 27016 92943 42158 152343 69101 217721 98756 — —
2500 172.36 17235 7817 30711 13930 48082 21809 78821 35752 122995 55789 201601 91444 — — — —
2903(3) 200.15 21551 9775 38401 17418 60121 27270 98557 44704 — — — — — — — —

1. Refer to page 1900.95 for correction factor applied for superheated steam.
2. The following Napier factor is applied to the capacity of pressures greater than 1423 psig (98.11 barg): (0.1906 x Ppsia - 1000) / (0.2292 x Ppsia - 1061)
3. Maximum permissible set pressure on steam is 2903 psig (200.15 barg). Value is interpolated.
4. Sizing: Valves may be sized for either ASME or API applications

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 93
1900 TD Capacities
Valve Capacity for ASME B&PV Code Section VIII, for Saturated Steam (1) & (4)
Based on Set Pressure plus 10% overpressure or 3 psig (0.21 barg), whichever is greater. showing 90% of actual capacity in
accordance with latest ASME Code requirements.
Orifice
Designation M N P Q R T U V W
in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2
Orifice Area
4.186 27.006 5.047 32.561 7.417 47.852 12.850 82.903 18.600 120.000 30.210 194.903 35.010 225.871 50.260 324.257 78.996 509.651
Set Pressure Orifice Capacity
psig barg lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr
15 1.03 6027 2733 7266 3295 10679 4843 18502 8392 26781 12147 43498 19730 50409 22865 72367 32825 113743 51592
20 1.37 6948 3151 8378 3800 12312 5584 21331 9675 30876 14005 50149 22747 58117 26361 83432 37844 131135 59481
30 2.06 8792 3987 10600 4808 15578 7066 26989 12242 39066 17720 63451 28780 73533 33354 105563 47882 165919 75259
40 2.75 10819 4907 13045 5917 19170 8695 33213 15065 48075 21806 78084 35418 90490 41045 129907 58924 204181 92614
50 3.44 12847 5827 15489 7025 22763 10325 39437 17888 57084 25892 92716 42055 107447 48737 154251 69967 242443 109970
60 4.13 14874 6746 17934 8134 26355 11954 45661 20711 66093 29979 107348 48692 124405 56429 178595 81009 280706 127326
70 4.82 16902 7666 20378 9243 29948 13584 51885 23534 75102 34065 121981 55329 141362 64120 202938 92051 318968 144681
80 5.51 18929 8586 22823 10352 33540 15213 58109 26357 84111 38152 136613 61966 158320 71812 227282 103093 357230 162036
90 6.20 20957 9505 25267 11460 37133 16843 64333 29180 93120 42238 151246 68604 175277 79504 251626 114135 395493 179392
100 6.89 22984 10425 27712 12569 40725 18472 70557 32004 102129 46324 165878 75241 192234 87195 275970 125177 433755 196747
120 8.27 27039 12264 32601 14787 47910 21731 83005 37650 120147 54497 195143 88515 226149 102579 324657 147261 510280 231459
140 9.65 31094 14104 37490 17005 55095 24990 95453 43296 138166 62671 224408 101789 260064 117963 373345 169346 586804 266169
160 11.03 35149 15943 42379 19222 62280 28249 107901 48943 156184 70843 253673 115064 293978 133346 422033 191430 663329 300880
180 12.41 39204 17782 47268 21440 69465 31508 120349 54589 174202 79016 282938 128338 327893 148729 470720 213515 739853 335591
200 13.78 43259 19621 52157 23658 76650 34767 132797 60235 192220 87189 312203 141612 361808 164113 519408 235599 816378 370302
220 15.16 47314 21461 57046 25875 83835 38026 145245 65882 210238 95362 341467 154886 395723 179496 568095 257683 892903 405014
240 16.54 51369 23300 61936 28093 91020 41285 157693 71528 228256 103535 370732 168161 429637 194880 616783 279768 969427 439724
260 17.92 55425 25140 66825 30311 98205 44545 170141 77174 246274 111708 399997 181435 463552 210263 665471 301852 1045952 474435
280 19.30 59480 26979 71714 32528 105390 47804 182589 82820 264292 119880 429262 194709 497467 225647 714158 323936 1122476 509146
300 20.68 63535 28818 76603 34746 112575 51063 195037 88467 282310 128053 458527 207984 531381 241030 762846 346021 1199001 543857
320 22.06 67590 30658 81492 36964 119760 54322 207485 94113 — — — — — — — — — —
340 23.44 71645 32497 86381 39181 126945 57581 219933 99759 — — — — — — — — — —
360 24.82 75700 34336 91270 41399 134130 60840 232381 105406 — — — — — — — — — —
380 26.20 79755 36176 96159 43616 141315 64099 244829 111052 — — — — — — — — — —
400 27.57 83810 38015 101048 45834 148500 67358 257277 116698 — — — — — — — — — —
420 28.95 87865 39854 105938 48052 155685 70617 269725 122345 — — — — — — — — — —
440 30.33 91920 41694 110827 50270 162869 73876 282173 127991 — — — — — — — — — —
460 31.71 95975 43533 115716 52487 170054 77135 294621 133637 — — — — — — — — — —
480 33.09 100030 45372 120605 54705 177239 80394 307069 139284 — — — — — — — — — —
500 34.47 104085 47212 125494 56923 184424 83653 319517 144930 — — — — — — — — — —
600 41.36 124360 56408 149939 68011 220349 99948 381757 173162 — — — — — — — — — —
700 48.26 144635 65605 174385 79099 256274 116243 — — — — — — — — — — — —
800 55.15 164911 74802 198830 90187 292199 132539 — — — — — — — — — — — —
900 62.05 185186 83998 223276 101276 328124 148834 — — — — — — — — — — — —
1000 68.94 205461 93195 247722 112364 364048 165129 — — — — — — — — — — — —
1100 75.84 225736 102392 — — — — — — — — — — — — — — — —
1200 82.73 246011 111588 — — — — — — — — — — — — — — — —
1300 89.63 — — — — — — — — — — — — — — — — — —
1400 96.52 — — — — — — — — — — — — — — — — — —
1423(2) 981.33 — — — — — — — — — — — — — — — — — —
1500 103.42 — — — — — — — — — — — — — — — — — —
2000 137.89 — — — — — — — — — — — — — — — — — —
2500 172.36 — — — — — — — — — — — — — — — — — —
2903(3) 200.15 — — — — — — — — — — — — — — — — — —

1. Refer to page 1900.95 for correction factor applied for superheated steam.
2. The following Napier factor is applied to the capacity of pressures greater than 1423 psig (98.11 barg): (0.1906 x Ppsia - 1000) / (0.2292 x Ppsia - 1061)
3. Maximum permissible set pressure on steam is 2903 psig (200.15 barg). Value is interpolated.
4. Sizing: Valves may be sized for either ASME or API applications

94 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 1900 LA/LA1 & 1900 DM Capacities
Valve Capacity for ASME B&PVC Section I & VIII, for Water (1)
Based on Set Pressure plus 10% overpressure or 3 psig (0.21 barg), whichever is greater. showing 90% of actual capacity in
accordance with latest ASME Code requirements.
Orifice
Designation D E F G H J K L
in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2
Orifice Area
0.128 0.825 0.228 1.470 0.357 2.302 0.585 3.774 0.913 5.888 1.496 9.652 2.138 13.794 3.317 21.400
Set Pressure Orifice Capacity
psig barg gpm L/min gpm L/min gpm L/min gpm L/min gpm L/min gpm L/min gpm L/min gpm L/min
15 1.03 13 49 24 91 38 144 63 238 98 371 161 609 230 871 358 1355
20 1.37 15 57 27 102 43 163 71 269 111 420 182 689 261 988 404 1529
30 2.06 18 68 33 125 52 197 85 322 133 503 218 825 312 1181 485 1836
40 2.75 21 79 38 144 60 227 98 371 154 583 252 954 361 1367 560 2120
50 3.44 24 91 43 163 67 254 110 416 172 651 282 1067 403 1526 626 2370
60 4.13 26 98 47 178 73 276 120 454 188 712 309 1170 442 1673 686 2597
70 4.82 28 106 50 189 79 299 130 492 203 768 334 1264 477 1806 741 2805
80 5.51 30 114 54 204 85 322 139 526 217 821 357 1351 510 1931 792 2998
90 6.20 32 121 57 216 90 341 148 560 231 874 378 1431 541 2048 840 3180
100 6.89 34 129 60 227 95 360 156 591 243 920 399 1510 570 2158 885 3350
120 8.27 37 140 66 250 104 394 171 647 266 1007 437 1654 625 2366 970 3672
140 9.65 40 151 72 273 112 424 184 697 288 1090 472 1787 675 2555 1047 3963
160 11.03 43 163 76 288 120 454 197 746 308 1166 505 1912 722 2733 1120 4240
180 12.41 45 170 81 307 127 481 209 791 326 1234 535 2025 765 2896 1188 4497
200 13.78 48 182 86 326 134 507 220 833 344 1302 564 2135 807 3055 1252 4739
220 15.16 50 189 90 341 141 534 231 874 361 1367 592 2241 846 3202 1313 4970
240 16.54 52 197 94 356 147 556 241 912 377 1427 618 2339 884 3346 1372 5194
260 17.92 55 208 98 371 153 579 251 950 392 1484 644 2438 920 3483 1428 5406
280 19.30 57 216 101 382 159 602 261 988 407 1541 668 2529 955 3615 1482 5610
300 20.68 59 223 105 397 165 625 270 1022 422 1597 691 2616 988 3740 1534 5807
320 22.06 61 231 108 409 170 644 279 1056 435 1647 714 2703 1021 3865 1584 5996
340 23.44 62 235 112 424 175 662 287 1086 449 1700 736 2786 1052 3982 1633 6182
360 24.82 64 242 115 435 180 681 296 1120 462 1749 757 2866 1083 4100 1680 6359
380 26.20 66 250 118 447 185 700 304 1151 475 1798 778 2945 1112 4209 1726 6534
400 27.57 68 257 121 458 190 719 312 1181 487 1843 798 3021 1141 4319 1771 6704
420 28.95 69 261 124 469 195 738 320 1211 499 1889 818 3096 1169 4425 1815 6871
440 30.33 71 269 127 481 199 753 327 1238 511 1934 837 3168 1197 4531 1857 7030
460 31.71 73 276 130 492 204 772 334 1264 522 1976 856 3240 1224 4633 1899 7188
480 33.09 74 280 133 503 208 787 342 1295 533 2018 875 3312 1250 4732 1940 7344
500 34.47 76 288 136 515 213 806 349 1321 544 2059 893 3380 1276 4830 1980 7495
600 41.36 83 314 149 564 233 882 382 1446 596 2256 978 3702 1398 5292 2169 8211
700 48.26 90 341 161 609 252 954 413 1563 644 2438 1056 3997 1510 5716 2343 8869
800 55.15 96 363 172 651 269 1018 441 1669 689 2608 1129 4274 1614 6110 2505 9482
900 62.05 102 386 182 689 285 1079 468 1772 731 2767 1198 4535 1712 6481 2657 10058
1000 68.94 107 405 192 727 301 1139 493 1866 770 2915 1263 4781 1805 6833 2800 10599
1100 75.84 113 428 201 761 315 1192 517 1957 808 3059 1324 5012 1893 7166 2937 11118
1200 82.73 118 447 210 795 330 1249 541 2048 844 3195 1383 5235 1977 7484 3068 11614
1300 89.63 123 466 219 829 343 1298 563 2131 878 3324 1440 5451 2058 7790 3193 12087
1400 96.52 127 481 227 859 356 1348 584 2211 911 3449 1494 5655 2136 8086 3313 12541
1500 103.42 132 500 235 890 368 1393 604 2286 943 3570 1547 5856 2211 8370 3430 12984
2000 137.89 152 575 272 1030 426 1613 698 2642 1089 4122 1786 6761 2553 9664 — —
2500 172.36 170 644 304 1151 476 1802 780 2953 1218 4611 1997 7559 — — — —
3000 206.84 187 708 333 1261 521 1972 855 3237 1334 5050 2187 8279 — — — —
4000 275.79 215 814 215 814 602 2279 987 3736 — — — — — — — —
5000 344.73 241 912 241 912 673 2548 — — — — — — — — — —
6000 413.68 264 999 264 999 — — — — — — — — — — — —

1. Sizing: Valves may be sized for either ASME or API applications

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 95
 1900 LA/LA1 & 1900 DM Capacities
Valve Capacity for ASME B&PVC Section I & VIII, for Water (1)
Based on Set Pressure plus 10% overpressure or 3 psig (0.21 barg), whichever is greater. showing 90% of actual capacity in
accordance with latest ASME Code requirements.
Orifice
Designation M N P Q R T U V W
in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2 in2 cm2
Orifice Area
4.186 27.006 5.047 32.561 7.417 47.852 12.850 82.903 18.600 120.000 30.210 194.903 35.010 225.871 50.260 324.257 78.996 509.651
Set Pressure Orifice Capacity
psig barg gpm L/Sec gpm L/Sec gpm L/Sec gpm L/Sec gpm L/Sec gpm L/Sec gpm L/Sec gpm L/Sec gpm L/Sec
15 1.03 452 1711 545 2063 801 3032 1387 5250 2009 7605 3263 12352 3780 14309 5428 20547 8532 32297
20 1.37 511 1934 616 2332 905 3426 1568 5936 2271 8597 3688 13961 4273 16175 6136 23227 9645 36510
30 2.06 612 2317 738 2794 1084 4103 1879 7113 2720 10296 4418 16724 5118 19374 7350 27823 11553 43733
40 2.75 706 2673 852 3225 1252 4739 2170 8214 3141 11890 5101 19309 5910 22372 8487 32127 13340 50497
50 3.44 790 2990 952 3604 1400 5300 2426 9183 3511 13291 5703 21588 6608 25014 9489 35920 14915 56459
60 4.13 865 3274 1043 3948 1534 5807 2657 10058 3847 14562 6248 23651 7239 27403 10395 39349 16338 61846
70 4.82 935 3539 1127 4266 1656 6269 2870 10864 4155 15728 6749 25548 7819 29598 11228 42503 17648 66805
80 5.51 999 3782 1205 4561 1771 6704 3068 11614 4442 16815 7215 27312 8359 31642 12003 45436 18866 71416
90 6.20 1060 4013 1278 4838 1878 7109 3255 12322 4711 17833 7652 28966 8866 33561 12731 48192 20010 75746
100 6.89 1117 4228 1347 5099 1980 7495 3431 12988 4966 18798 8066 30533 9345 35375 13420 50800 21093 79846
120 8.27 1224 4633 1476 5587 2169 8211 3758 14226 5440 20593 8836 33448 10237 38751 14701 55649 23106 87466
140 9.65 1322 5004 1594 6034 2343 8869 4059 15365 5876 22243 9544 36128 11057 41855 15879 60109 24958 94476
160 11.03 1413 5349 1704 6450 2505 9482 4340 16429 6282 23780 10203 38623 11821 44747 16975 64257 26681 100999
180 12.41 1499 5674 1808 6844 2657 10058 4603 17424 6663 25222 10822 40966 12538 47461 18005 68156 28299 107123
200 13.78 1580 5981 1905 7211 2800 10599 4852 18367 7023 26585 11407 43180 13216 50028 18979 71843 29830 112919
220 15.16 1657 6272 1998 7563 2937 11118 5089 19264 7366 27883 11964 45289 13861 52470 19905 75349 31286 118430
240 16.54 1731 6553 2087 7900 3068 11614 5315 20119 7694 29125 12496 47303 14478 54805 20790 78699 32677 123696
260 17.92 1802 6821 2173 8226 3193 12087 5532 20941 8008 30314 13007 49237 15069 57042 21639 81913 34012 128749
280 19.30 1870 7079 2255 8536 3313 12541 5741 21732 8310 31457 13498 51095 15638 59196 22456 85005 35296 133610
300 20.68 1935 7325 2334 8835 3430 12984 5942 22493 8602 32562 13971 52886 16187 61274 23244 87988 36534 138296
320 22.06 1999 7567 2410 9123 3542 13408 6137 23231 — — — — — — — — — —
340 23.44 2061 7802 2484 9403 3651 13821 6326 23947 — — — — — — — — — —
360 24.82 2120 8025 2556 9676 3757 14222 6510 24643 — — — — — — — — — —
380 26.20 2178 8245 2627 9944 3860 14612 6688 25317 — — — — — — — — — —
400 27.57 2235 8460 2695 10202 3960 14990 6862 25975 — — — — — — — — — —
420 28.95 2290 8669 2761 10452 4058 15361 7031 26615 — — — — — — — — — —
440 30.33 2344 8873 2826 10698 4154 15725 7197 27244 — — — — — — — — — —
460 31.71 2397 9074 2890 10940 4247 16077 7359 27857 — — — — — — — — — —
480 33.09 2448 9267 2952 11175 4339 16425 7517 28455 — — — — — — — — — —
500 34.47 2499 9460 3013 11405 4428 16762 7672 29042 — — — — — — — — — —
600 41.36 2737 10361 3301 12496 4851 18363 8404 31813 — — — — — — — — — —
700 48.26 2957 11193 3565 13495 5239 19832 9078 34364 — — — — — — — — — —
800 55.15 3161 11966 3811 14426 5601 21202 9704 36734 — — — — — — — — — —
900 62.05 3353 12692 4042 15301 5941 22489 10293 38963 — — — — — — — — — —
1000 68.94 3534 13378 4261 16130 6262 23704 10850 — — — — — — — — — — —
1100 75.84 3707 14033 — — — — — — — — — — — — — — — —
1200 82.73 — — — — — — — — — — — — — — — — — —
1300 89.63 — — — — — — — — — — — — — — — — — —
1400 96.52 — — — — — — — — — — — — — — — — — —
1500 103.42 — — — — — — — — — — — — — — — — — —
2000 137.89 — — — — — — — — — — — — — — — — — —
2500 172.36 — — — — — — — — — — — — — — — — — —
3000 206.84 — — — — — — — — — — — — — — — — — —
4000 275.79 — — — — — — — — — — — — — — — — — —
5000 344.73 — — — — — — — — — — — — — — — — — —
6000 413.68 — — — — — — — — — — — — — — — — — —

1. Sizing: Valves may be sized for either ASME or API applications

96 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 1900 TD Superheat Correction
Superheat Correction Factor (1) & (2)
Total Temp.
400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200
( ˚F )
Flowing
Pressure(3) Superheat Correction Factor K sh
(psia)
50 0.987 0.957 0.93 0.905 0.882 0.861 0.841 0.823 0.805 0.789 0.774 0.759 0.745 0.732 0.719 0.708 0.696
100 0.998 0.963 0.935 0.909 0.885 0.864 0.843 0.825 0.807 0.79 0.775 0.76 0.746 0.733 0.72 0.708 0.697
150 0.984 0.97 0.94 0.913 0.888 0.866 0.846 0.826 0.808 0.792 0.776 0.761 0.747 0.733 0.721 0.709 0.697
200 0.979 0.977 0.945 0.917 0.892 0.869 0.848 0.828 0.81 0.793 0.777 0.762 0.748 0.734 0.721 0.709 0.698
250 - 0.972 0.951 0.921 0.895 0.871 0.85 0.83 0.812 0.794 0.778 0.763 0.749 0.735 0.722 0.71 0.698
300 - 0.968 0.957 0.926 0.898 0.874 0.852 0.832 0.813 0.796 0.78 0.764 0.75 0.736 0.723 0.71 0.699
350 - 0.968 0.963 0.93 0.902 0.877 0.854 0.834 0.815 0.797 0.781 0.765 0.75 0.736 0.723 0.711 0.699
400 - - 0.963 0.935 0.906 0.88 0.857 0.836 0.816 0.798 0.782 0.766 0.751 0.737 0.724 0.712 0.7
450 - - 0.961 0.94 0.909 0.883 0.859 0.838 0.818 0.8 0.783 0.767 0.752 0.738 0.725 0.712 0.7
500 - - 0.961 0.946 0.914 0.886 0.862 0.84 0.82 0.801 0.784 0.768 0.753 0.739 0.725 0.713 0.701
550 - - 0.962 0.952 0.918 0.889 0.864 0.842 0.822 0.803 0.785 0.769 0.754 0.74 0.726 0.713 0.701
600 - - 0.964 0.958 0.922 0.892 0.867 0.844 0.823 0.804 0.787 0.77 0.755 0.74 0.727 0.714 0.702
650 - - 0.968 0.958 0.927 0.896 0.869 0.846 0.825 0.806 0.788 0.771 0.756 0.741 0.728 0.715 0.702
700 - - - 0.958 0.931 0.899 0.872 0.848 0.827 0.807 0.789 0.772 0.757 0.742 0.728 0.715 0.703
750 - - - 0.958 0.936 0.903 0.875 0.85 0.828 0.809 0.79 0.774 0.758 0.743 0.729 0.716 0.703
800 - - - 0.96 0.942 0.906 0.878 0.852 0.83 0.81 0.792 0.774 0.759 0.744 0.73 0.716 0.704
850 - - - 0.962 0.947 0.91 0.88 0.855 0.832 0.812 0.793 0.776 0.76 0.744 0.73 0.717 0.704
900 - - - 0.965 0.953 0.914 0.883 0.857 0.834 0.813 0.794 0.777 0.76 0.745 0.731 0.718 0.705
950 - - - 0.969 0.958 0.918 0.886 0.86 0.836 0.815 0.796 0.778 0.761 0.746 0.732 0.718 0.705
1000 - - - 0.974 0.959 0.923 0.89 0.862 0.838 0.816 0.797 0.779 0.762 0.747 0.732 0.719 0.706
1050 - - - - 0.96 0.927 0.893 0.864 0.84 0.818 0.798 0.78 0.763 0.748 0.733 0.719 0.707
1100 - - - - 0.962 0.931 0.896 0.867 0.842 0.82 0.8 0.781 0.764 0.749 0.734 0.72 0.707
1150 - - - - 0.964 0.936 0.899 0.87 0.844 0.821 0.801 0.782 0.765 0.749 0.735 0.721 0.708
1200 - - - - 0.966 0.941 0.903 0.872 0.846 0.823 0.802 0.784 0.766 0.75 0.735 0.721 0.708
1250 - - - - 0.969 0.946 0.906 0.875 0.848 0.825 0.804 0.785 0.767 0.751 0.736 0.722 0.709
1300 - - - - 0.973 0.952 0.91 0.878 0.85 0.826 0.805 0.786 0.768 0.752 0.737 0.723 0.709
1350 - - - - 0.977 0.958 0.914 0.88 0.852 0.828 0.807 0.787 0.769 0.753 0.737 0.723 0.71
1400 - - - - 0.982 0.963 0.918 0.883 0.854 0.83 0.808 0.788 0.77 0.754 0.738 0.724 0.71
1450 - - - - 0.987 0.968 0.922 0.886 0.857 0.832 0.809 0.79 0.771 0.754 0.739 0.724 0.711
1500 - - - - 0.993 0.97 0.926 0.889 0.859 0.833 0.811 0.791 0.772 0.755 0.74 0.725 0.711
1550 - - - - - 0.972 0.93 0.892 0.861 0.835 0.812 0.792 0.773 0.756 0.74 0.726 0.712
1600 - - - - - 0.973 0.934 0.894 0.863 0.836 0.813 0.792 0.774 0.756 0.74 0.726 0.712
1650 - - - - - 0.973 0.936 0.895 0.863 0.836 0.812 0.791 0.772 0.755 0.739 0.724 0.71
1700 - - - - - 0.973 0.938 0.895 0.863 0.835 0.811 0.79 0.771 0.754 0.738 0.723 0.709
1750 - - - - - 0.974 0.94 0.896 0.862 0.835 0.81 0.789 0.77 0.752 0.736 0.721 0.707
1800 - - - - - 0.975 0.942 0.897 0.862 0.834 0.81 0.788 0.768 0.751 0.735 0.72 0.705
1850 - - - - - 0.976 0.944 0.897 0.862 0.833 0.809 0.787 0.767 0.749 0.733 0.718 0.704
1900 - - - - - 0.977 0.946 0.898 0.862 0.832 0.807 0.785 0.766 0.748 0.731 0.716 0.702
1950 - - - - - 0.979 0.949 0.898 0.861 0.832 0.806 0.784 0.764 0.746 0.729 0.714 0.7
2000 - - - - - 0.982 0.952 0.899 0.861 0.831 0.805 0.782 0.762 0.744 0.728 0.712 0.698
2050 - - - - - 0.985 0.954 0.899 0.86 0.83 0.804 0.781 0.761 0.742 0.726 0.71 0.696
2100 - - - - - 0.988 0.956 0.9 0.86 0.828 0.802 0.779 0.759 0.74 0.724 0.708 0.694
2150 - - - - - - 0.956 0.9 0.859 0.827 0.801 0.778 0.757 0.738 0.722 0.706 0.692
2200 - - - - - - 0.955 0.901 0.859 0.826 0.799 0.776 0.755 0.736 0.72 0.704 0.69
2250 - - - - - - 0.954 0.901 0.858 0.825 0.797 0.774 0.753 0.734 0.717 0.702 0.687
2300 - - - - - - 0.953 0.901 0.857 0.823 0.795 0.772 0.751 0.732 0.715 0.699 0.685
2350 - - - - - - 0.952 0.902 0.856 0.822 0.794 0.769 0.748 0.729 0.712 0.697 0.682
2400 - - - - - - 0.952 0.902 0.855 0.82 0.791 0.767 0.746 0.727 0.71 0.694 0.679
2450 - - - - - - 0.951 0.902 0.854 0.818 0.789 0.765 0.743 0.724 0.707 0.691 0.677
2500 - - - - - - 0.951 0.902 0.852 0.816 0.787 0.762 0.74 0.721 0.704 0.688 0.674
2550 - - - - - - 0.951 0.902 0.851 0.814 0.784 0.759 0.738 0.718 0.701 0.685 0.671
2600 - - - - - - 0.951 0.903 0.849 0.812 0.782 0.756 0.735 0.715 0.698 0.682 0.664
2650 - - - - - - 0.952 0.903 0.848 0.809 0.779 0.754 0.731 0.712 0.695 0.679 0.664
2700 - - - - - - 0.952 0.903 0.846 0.807 0.776 0.75 0.728 0.708 0.691 0.675 0.661
2750 - - - - - - 0.953 0.903 0.844 0.804 0.773 0.747 0.724 0.705 0.687 0.671 0.657
2800 - - - - - - 0.956 0.903 0.842 0.801 0.769 0.743 0.721 0.701 0.684 0.668 0.653
2850 - - - - - - 0.959 0.902 0.839 0.798 0.766 0.739 0.717 0.697 0.679 0.663 0.649
2900 - - - - - - 0.963 0.902 0.836 0.794 0.762 0.735 0.713 0.693 0.675 0.659 0.645
2950 - - - - - - - 0.902 0.834 0.79 0.758 0.731 0.708 0.688 0.671 0.655 0.64

1. For capacity on superheated steam, multiply saturated steam capacity by correction factor.
2. Convert set pressure from (psig) to (psia) flowing pressure.
3. psia flowing = [set pressure psig x overpressure] + 14.7

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 97
 1900/1900 DM Series Valve Configuration Code
MATERIAL CLASS DEVIATION FROM STANDARD

(1)
NON-STANDARD OUTLET SEAT DESIGN

(2)

INTERCHANGEABILITY LEVER/CAP DESIGN

ORIFICE INLET FACING

BELLOWS SELECTION SERVICE

PRESSURE CLASS DISC HOLDER PRESSURE

VALVE TYPE GUIDE SURFACE COATING

19 05 - 00 - D - 1DM - CC - MS - 31 - RF - GSDC - LP -
06 30 E 15 C1 * DA 32 RJ LA HP G1
10 F 16 C2 TD 33 LM LA1 G2
12 G 17 C3 CD 34 SM SS G3
14 H 18 S2 35 LF GSDC
16 J 19 S3 36 SF LADC
18 K 20 S4 37 LT
20 L 21 M1 ST
21 M 22 MB LG
22 N 23 M2 SG
23 P 24 M3 RS
24 Q M4 FF
26 R H1 LJ
28 T H2 BW
U H3 SW
V H4 GL
W L1 OC
L2 TC
L3
1. When either a mated or rated outlet flange
T1
is provided, the interchangeability number is
modified per the Valve Configuration Code Table T2
and the tag part number (for mated only) is added A1
to the BOM.
A2
2. DM only applicable if a Dual Media (DM) is
selected. A3
A4
HA
D1
D2
D3
D4
N1
N2

98 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.

 1900/1900 DM Series Valve Configuration Code
Pressure Class Interchangeability Number

Designation Class Designation Valve Type

05 150 1 to 5 (1900/1900 DM) Numerical values vary by Orifice
06 300
DM (Only if DM is configured) Dual Media
10 300
12 600
Material Trim
14 900
16 1500 Designation Trim
18 2500 CC Standard Material
20 300 C1 Ambient Temp. to -50°F [LCC Construction]
21 (-2T Only) 300 C2 Ambient Temp. To -50°F [St. St. Construction]
22 600 N1 Carbon Steel NACE
23 (P-2 Only) 600 N2 Stainless Steel NACE
24 900 S2 Stainless St. [Internals, Except Spring Assy.]
26 1500 S3 Stainless St. [All except Spring Assy.]
28 2500 S4 Stainless St. [Complete Valve]
M1 Monel [Nozzle and Disc]
MB (M1-1/2) Monel [M1+Disc Holder, Adj. Ring and Ring Pin]
Seat Design M2 Monel [Internals, except Spring Assy.]
Designation Type M3 Monel [All except Spring Assy.]
MS Metal Seat M4 Monel [Complete Valve]
H1 Hastelloy C [Nozzle and Disc]
DA O-ring
H2 Hastelloy C [Internals, except Spring Assy.]
TD Thermodisc
H3 Hastelloy C [All except Spring Assy.]
CD Cryodisc
H4 Hastelloy C [Complete Valve]
L1 Low Temperature Service [-21°F To -75°F]
L2 Low Temperature Service [-76°F To -150°F]
Standard Valve Connection
L3 Low Temperature Service [-151°F To -450°F]
Area (API) Area (ASME)
Orifice T1 High Temperature Service [1001°F To 1200°F]
in2 cm2 in2 cm2
T2 High Temperature Service [1201°F To 1500°F]
D 0.110 0.710 0.128 0.825
A1 Alloy 20 [Nozzle and Disc]
E 0.196 1.265 0.228 1.470
A2 Alloy 20 [Internals, except Spring Assy.]
F 0.307 1.981 0.357 2.302
A3 Alloy 20 [All except Spring Assy.]
G 0.503 3.245 0.585 3.774
A4 Alloy 20 [Complete Valve]
H 0.785 5.065 0.913 5.888
J 1.287 8.303 1.496 9.652 HA Hydrofluoric Acid [Anhydrous Hf Alky]

K 1.838 11.858 2.138 13.794 D1 Duplex [Nozzle and Disc]

L 2.853 18.406 3.317 21.400 D2 Duplex [Internals, except Spring Assy.]

M 3.600 23.226 4.186 27.006 Duplex [All except Spring Assy., Stud/Nut and
D3
Bellows Assy.]
N 4.340 28.000 5.047 32.561
D4 Duplex [All except Stud/Nut and Bellows Assy.]
P 6.380 41.161 7.417 47.852
Q 11.050 71.290 12.850 82.903
R 16.000 103.226 18.600 120.000 Bellows Selection
T 26.000 167.742 30.210 194.903 Designation Range
U N/A N/A 35.000 225.806
00 Non Bellows
V N/A N/A 50.260 324.257
30 Bellows
W N/A N/A 78.996 509.651
35 Balanced Bellows

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 99
1900/1900 DM Series Valve Configuration Code
Non-Standard Outlet Lever/Cap Design

Designation Type
Standard Actual Actual Mated
Non 31 Screwed
Valve Outlet Body Outlet “M” Additional Tag Part
Orifice Standard
Type Flange Class Flange Rated Tag Number(1) 32 Bolted
Outlet Code1
Rating Rating Class “R”
33 Packed
300 15 34 Plain
600 16 37 Air Operated
1905-
All 150 150 900 17 7592401
1912
1500 18 Inlet Flange Facing
2500 19 Yes
M Designation Facing
600 16 RF Raised Face Serrated
1912-
D-G 900 17 RJ Ring Joint
1918 300 300 7592601
1500 18 LM Large Male

1916 H-L 2500 19 SM Small Male

LF Large Female
150 300 300 20
SF Small Female
600 600 21
R LT Large Tongue
1900 All 900 900 (FULLY 22 No N/A ST Small Tongue
> 150 RATED)
1500 1500 23 LG Large Groove
2500 2500 24 SG Small Groove
RS Raised Face, Smooth
1. The configuration code is modified by adding the “Non- Standard Outlet Code” from this
column to the interchangeability number. For example: the interchangeability number is -1 LJ Lens Joint
and the Configuration Code from this table is 15 then the interchangeability number is -115.
BW Butt Weld
SW Socket Weld
Service GL Grayloc

Designation Type OC Oteco

TC Tri-Clamp
GS Gas

LA Liquid
Disc Holder Pressure Design
LA1 Section I Liquid Service
Designation Pressure Range(1)
SS Steam
LP Low Pressure
GSDC Gas Service Dual Certified per CC2787 (1900 DM)
HP High Pressure
LADC Liquid Service Dual Certified per CC2787 (1900 DM)
1. Pressure Ranges vary per orifice.

Guide Surface Coating

Designation Part Coated

G1 Glide-Aloy™ Disc Holder
G2 Glide-Aloy™ Guide
Glide-Aloy™ Disc Holder
G3
and Guide

100 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.
1900 DM Series API 10/15K Valve Configuration Code

MATERIAL CLASS DEVIATION FROM STANDARD

NON-STANDARD OUTLET SEAT DESIGN

INTERCHANGEABILITY LEVER/CAP DESIGN

ORIFICE INLET FACING

BELLOWS SELECTION SERVICE

PRESSURE CLASS GUIDE SURFACE COATING

VALVE TYPE

19 48 - 00 - D - 1DM - F51A - MS - 31 - RJ - GSDC -

49 30 E * 32 GL LADC G1
F 33 TL G2
G 34 G3
H
J

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 101
 1900 DM Series API 10/15K Configurator Code

Pressure Class Guiding Surfaces Coating

Designation Class G1 Glide Alloy Disc Holder

48 API 6BX 10K G2 Glide Alloy Guide

49 API 6BX 15K G3 Glide Alloy DH & Guide

Inlet Facing Service

RJ Ring Joint Sized for gas,

GSDC
Dual certified per CC2787
GL Grayloc
Sized for liquid,
TL Techlok LADC
Dual certified per CC2787

Seat Design Cap/Lever

MS Metal Seat 31 Screwed

32 Bolted

33 Packed
Bellows Selection
34 Plain
00 Non-bellows

Interchangeability Material

Numerical values vary ASME SA-182 F51 Base & Bonnet,

1DM F51A
by Orifice Inconel Disc & Nozzle
ASME SA-182 F51 Base & Bonnet, ASME SA-182
F51B
F51 Disc & Nozzle w/Stellite Hardface

Orifice ASME SA-182 F53 Base & Bonnet,

F53A
Inconel Disc & Nozzle
Orifice Area Area
ASME SA-182 F53 Base & Bonnet, ASME SA-182
Size (API) (ASME) F53B
F53 Disc & Nozzle w/Stellite Hardface
in² cm² in² cm² ASME SA-182 F55 Base & Bonnet,
0.128 F55A
D 0.110 0.710 0.825 Inconel Disc & Nozzle

E 0.196 1.265 0.228 1.470 ASME SA-182 F55 Base & Bonnet, ASME SA-182
F55B
0.357 F55 Disc & Nozzle w/Stellite Hardface
F 0.307 1.981 2.302
0.585 ASTM A694 F65 Base & Bonnet,
G 0.503 3.245 3.774 F65A
Inconel Disc & Nozzle (Non-ASME Code valve)
H 0.785 5.065 0.913 5.888
J 1.287 8.303 1.496 9.652

102 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.
 Ordering a 1900/1900 DM Safety Relief Valve
Specification Sheet
Page_____ of_____ Materials

14. Body/Bonnet:
Requisition No.
15. Guide/Rings:
________________________
16. Seat Material:
Job No.
________________________ Metal:

Date Resilient:

________________________ 17. Bellows:

Revised By 18. Spring:

________________________ 19. Comply with NACE MRO 175  YES  NO

20.  OTHER Specify:

General
21. Cap and Lever Selection
1. Item Number:
 Screwed Cap (Standard)  Bolted Cap
2. Tag Number:
 Plain Lever  Packed Lever  Gag
3. Service, Line or Equipment No:
22.  OTHER Specify:
4. Number Required:
Service Conditions
Basis of Selection
23. Fluid and State:
5. Code:
24. Required Capacity per Valve and Units:
 ASME Sec. I (Liquid Service)
25. Molecular Weight or Specific Gravity:
 ASME Sec. III
26. Viscosity at Flowing Temperature and Units:
 ASME Sec. VIII
27. Operating Pressure and Units:
 OTHER Specify:
28. Blowdown:  Standard  Other
6. Comply with API 526:  YES  NO
29. Latent Heat of Vaporization and Units:
7.  Fire  OTHER Specify: 30. Operating Temperature and Units:
8. Rupture Disk:  YES  NO 31. Relieving Temperature and Units:
Valve Design 32. Built-up Back Pressure and Units:
9. Type: Safety Relief 33. Superimposed Back Pressure and Units:
10. Design:  Conventional  Bellows  Balanced Piston 34. Cold differential Test Pressure and Units:
 Closed Bonnet  Open Bonnet 35. Allowable Overpressure in Percent or Units:
 Metal Seat  Resilient Seat 36. Compressibility Factor, Z:
 API 527 Seat Tightness 37. Ratio of Specific Heats:

 Restricted Lift Sizing and Selection

 OTHER Specify: 38. Calculated Orifice Area (square inches):

11. Trim Type 39. Selected Orifice Area (square inches):

 Dual Certified 40. Orifice Designation (letter):

 Liquid 41. Manufacturer:

 Gas 42. Model Number:

 Steam 43. Vendor Calculations Required:  YES  NO

Connections

12. Inlet Size: Rating: Facing:

Outlet Size: Rating: Facing:

13.  OTHER Specify:

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 103
 Notes:

104 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.
 Notes:

© 2021 Baker Hughes Company. All rights reserved. Consolidated 1900/1900 DM Series Safety Relief Valves Technical Specifications | 105
 Direct Sales Office Locations
Australia Italy Singapore
Brisbane Phone: +39-081-7892-111 Phone: +65-6861-6100
Phone: +61-7-3001-4319
Japan South Africa
Perth
Tokyo Phone: +27-83-387-9300
Phone: +61-8-6595-7018
Phone: +81-03-6871-9008
Melbourne South & Central
Phone: +61-3-8807-6002 Korea America and the Caribbean
Phone: +82-2-2274-0748 Phone: +55-12-2134-1201
Brazil
Phone: +55-19-2104-6900 Malaysia Spain
Phone: +60-3-2161-03228 Phone: +34-935-877-605
China
Phone: +86-10-5738-8888 Mexico United Arab Emirates
Phone: +52-55-3640-5060 Phone: +971-4-8991-777
France
Courbevoie Russia United Kingdom
Phone: +33-1-4904-9000 Veliky Novgorod Phone: +44-7919-382-156
Phone: +7-8162-55-7898
India United States
Moscow
Mumbai Houston, Texas
Phone: +7-495-585-1276
Phone: +91-22-8354790 Phone: +1-713-966-3600
New Delhi Saudi Arabia
Phone: +91-11-2-6164175 Phone: +966-3-341-0278

Find the nearest local Channel Partner in your area:

valves.bakerhughes.com/contact-us

Tech Field Support & Warranty:

Phone: +1-866-827-5378
[email protected]

valves.bakerhughes.com

Copyright 2021 Baker Hughes Company. All rights reserved. Baker Hughes provides this information
on an “as is” basis for general information purposes. Baker Hughes does not make any representa-
tion as to the accuracy or completeness of the information and makes no warranties of any kind,
specific, implied or oral, to the fullest extent permissible by law, including those of merchantability
and fitness for a particular purpose or use. Baker Hughes hereby disclaims any and all liability for
any direct, indirect, consequential or special damages, claims for lost profits, or third party claims
arising from the use of the information, whether a claim is asserted in contract, tort, or otherwise.
Baker Hughes reserves the right to make changes in specifications and features shown herein, or
discontinue the product described at any time without notice or obligation. Contact your Baker
Hughes representative for the most current information. The Baker Hughes logo, Consolidated,
Green Tag, Thermodisc, and Eductor Tube Advantage are trademarks of Baker Hughes Company.
Other company names and product names used in this document are the registered trademarks
or trademarks of their respective owners.

BHCN-1900-1900DM-TS-20256R-0621 06/2021
bakerhughes.com