Scribd
Upload
249 views

Driling JSA

This document provides a job safety analysis for drilling operations. It identifies 5 sub-activities with associated hazards and risk control measures. The sub-activities are: 1) manpower mobilization, 2) electrical connection, 3) drilling operation, 4) cleaning of burrs on drill bit, and 5) work during dark hours. Hazards include untrained workers, electric shock, flying chips, cut injuries, darkness, falls, and machinery falls. Control measures involve permits, PPE, illumination, cable routing, stoppage of machinery, and ensuring clear work areas.

Uploaded by

Miskovic Krsto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
249 views

Driling JSA

This document provides a job safety analysis for drilling operations. It identifies 5 sub-activities with associated hazards and risk control measures. The sub-activities are: 1) manpower mobilization, 2) electrical connection, 3) drilling operation, 4) cleaning of burrs on drill bit, and 5) work during dark hours. Hazards include untrained workers, electric shock, flying chips, cut injuries, darkness, falls, and machinery falls. Control measures involve permits, PPE, illumination, cable routing, stoppage of machinery, and ensuring clear work areas.

Uploaded by

Miskovic Krsto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

JSA (Job Safety Analysis) Sheet

Ref-
Activity Name:- Drilling Operation.

Location:- Date :

Sr.No. Sub-Activity Name Type Of Hazard Risk(s) Involved Risk Control measures
Manpower Only inducted worker shall be deputed at the work place.
1 Untrained worker Personal injury
Mobilization Given Tool Box Talk to all workers.
ELCB in main supply board to be there.
Personal Use of good insulation electrical cable.
Electrical
4 Electric shock Injury/Fatal Joint free cable to be used if joint is there provide shrinkable joint
Connection
Accident
Electrical Cable shall not interfere traffic and movements.
Remove all flammable & combustible materiel from work area.
All required PPE's to be used for drilling except handgloves.
cutting of drill bit Personal Injury
Work area shall be clear and free from any obstruction
5 Drilling Operation flying chips Eye Injury Ensure goggle before starting work
cleaning of burr Ensure machine is stop before cleaning
cut injury
on drill bit Use small metal stick to remove of burr.

Night work permit to be taken from concern engg.and safety dept.


Darkness, fall of Ensure proper illumination during dark hours.
Work during dark Personal injury,
6 person, fall of
hours damage to property Electrical cable should lead min 2 m height. No exposed electrical
machinery
wire.Earthing.
Route shall be illuminated.

Name & Signature of Site Engineer / Supervisor :___________Name & Signature of Site In-charge :___________

Name & Signature of Project In-charge :__________ Name & Signature of HSE Officer : ______

You might also like