SonicWall Bridge Course Questions

Estudar on-line em https://quizlet.com/_7i11g2

1. T/F: The default guest profile can- TRUE

not be deleted

2. What is the default timeout setting 5 minutes

for administrator inactivity?

3. Which panel of the SonicOS man- Manage > Appliance > Base Settings >
agement interface is used to de- Login Security
fine password restrictions?

4. What options are available to pre- Drop into Non-config mode

empt an administrator logged into Log out
a firewall? (Choose all that apply)

5. T/F: The real time data that is de- TRUE

picted on the Dashboard is com-
piled and summarized from the
AppFlow panel.

6. Which of the following are dis- Network interfaces

played on the System Status mon- Latest Alerts
itor? (Select all that apply) System Information

7. What type of information is dis- Viruses blocked

played on the Threat Protection Intrusions prevented
monitor? (Select all that apply) Spyware Blocked

8. T/F: The Firewall Snapshot sec- TRUE

tion displays the percentage of en-
crypted traffic flowing through the
firewall.

9. Where are the AppFlow reports Investigate > Reports > AppFlow Re-
generated in the SonicOS man- ports
agement interface?

10. Which packet replay method is Single Packet

used to send individual packets
with respective header fields and

1/6
 SonicWall Bridge Course Questions
Estudar on-line em https://quizlet.com/_7i11g2
payload details to the firewall en-
gine for analysis?

11. Event Logs Depict all network and user activity in

real-time

12. Connection Logs Display active inbound and outbound

connections

13. AppFlow Logs Provide information about incoming and

outgoing data packets in real-time

14. WAN Acceleration Logs Provide details about the WXA perfor-
mance

15. If the Logging Level filter is de- Critical

fined as Error, which of the fol- Emergency
lowing alert messages will also be Alert
displayed in the results? (Select
all that apply)

16. T/F: The Logging levels can be de- TRUE

picted, in descending order of pri-
ority, as:
Emergency
Alert
Critical
Error
Warning
Notice
Inform
Debug

17. T/F: When enabling HTTPS man- TRUE

agement on the WAN (X1) inter-
face, a rule to enable HTTP to
HTTPS redirect is automatically
enabled.

18.
2/6
 SonicWall Bridge Course Questions
Estudar on-line em https://quizlet.com/_7i11g2
Where do you navigate to create a Manage > System Setup > Network
virtual interface in SonicOS? > Interfaces > Click "Add Interface"
drop-down and select Virtual Interface

19. What are the 4 types of interfaces 1. Virtual Interface

that can be selected from the "Add 2. VPN Tunnel Interface
interfaces" drop-down? 3. WLAN Tunnel Interface
4. 4to6 Tunnel Interface

20. What are the 4 default zone types? 1. WAN

2. LAN
3. DMZ
4. WLAN

21. What are the 4 available IP modes 1. Static IP mode

under interface settings? 2. Transparent IP mode (Splice L3 sub-
net)
3. IP Unnumbered
4. Native Bridge mode

22. Static IP mode Must set the IP address and subnet

mask manually

23. Transparent IP mode (Splice L3 The IP address for the interface is as-
subnet) signed using an Address Object that
falls within the WAN primary IP subnet,
effectively spanning the subnet from the
WAN interface to the assigned interface

24. IP unnumbered mode Borrows its address from another inter-

face; this is configured when a WAN in-
terface is configured in PPoE mode

25. Native Bridge Mode the member interface will share the
same zone and IP subnet as parent in-
terface to which it is bridged

26. T/F: A default gateway address is TRUE

optional on a LAN interface

3/6
 SonicWall Bridge Course Questions
Estudar on-line em https://quizlet.com/_7i11g2
27. T/F: A default gateway IP address TRUE
is required on a WAN interface if
any destination is required to be
reached via the WAN interface that
is not part of the WAN subnet IP
address space

28. Where do you navigate to global- Manage > Security Configuration > Fire-
ly enable bandwidth management wall Settings > Bandwidth Management
on the firewall? > Click "Advanced" Radio Button > Click
"Accept"

29. Where do you navigate to config- Manage > System Setup > Network >
ure the WAN interface Bandwidth? Interfaces > Select "X1 WAN" > Select
"Advanced Settings" tab > Select "En-
able interface egress/ingress bandwidth
limitation"

30. Where do you navigate to config- Manage > Policies > Objects > Band-
ure a bandwidth object? width Objects > Click "Add"

31. T/F: If a firewall is licensed for FALSE

Capture ATP then the Capture ATP
service is enabled by default. You must navigate to Manage > Security
Services > Capture ATP > Click "Enable
it"

32. Where do you navigate to en- Manage > Security Configuration > Se-
able and configure Capture ATP, curity Services > Capture ATP > Click
GEO-IP, and Botnet Filter? "Enable it"

33. Where do you navigate to enable Manage > Security Configuration > Se-
GEO-IP filter? curity Services > GEO-IP filter

34. Where do you navigate to enable Manage > Security Configuration > Se-
Botnet filter? curity Services > Botnet filter

35. What are the list of available op- Allow

tions under for a category under Block
content filtering? BWM
4/6
 SonicWall Bridge Course Questions
Estudar on-line em https://quizlet.com/_7i11g2
Confirm
Passphrase

36. It is best practice to enable log- TRUE

ging on the specific category you
are editing in App Control Catego-
ry Settings

37. What are the 4 failover/load-bal- 1. Basic Failover

ancing types in SonicOS? 2. Round Robin
3. Spillover
4. Ratio

38. Basic Failover/Load-balance Uses rank to determine the order of pre-

emption when the preempt check box
has been enabled

39. Round Robin Failover/Load-bal- Allows the administrator to re-order the

ance interfaces for Round Robin Selection

40. Spillover Failover/Load-balance Once the bandwidth threshold for the

primary WAN has exceeded, new traffic
flows are allocated to the alternate in a
round robin manner

41. Ratio Failover/Load-balance Allows percentages to be assigned to

each WAN in the load-balancing group

42. High Availability (HA) can be con- FALSE

figured while interfaces still be-
longing to a Portshield group Absolutely NO interfaces on the Firewall
can be in Portshield when configuring
HA

43. For the HA Control Interface, any TRUE

of the unassigned interfaces can
be chosen, but the last copper in-
terface is generally chosen.

44. TRUE
5/6
 SonicWall Bridge Course Questions
Estudar on-line em https://quizlet.com/_7i11g2
It is a recommended best practice
to configure the X0 interface for
monitoring

45. SonicOS does NOT use the X0 in- FALSE

terface as the backup heartbeat
monitor in an HA pair X0 is used as a backup heart beat mon-
itor

6/6