IMPORTANT: before starting the equipment correctly, please follow the installation instructions.

Any damages caused by incorrect operations will void the warranty.

。

SAFETY INFORMATION
Thank you for choosing our products! This user instruction is specially designed for the safety of you and
others. Please read the instructions carefully before installing or using the machine and follow them when
using.

1.1 Electrical Safety

- Before installing the machine, make use that your local electric network complies with the voltage and
frequency indicated on the tag on the rear panel. Otherwise, the machine may be damaged in case of
excessive current or voltage rise.
- Never touch the machine with damp or wet hands or feet.
- It is dangerous to change or try to modify the function of this machine in any way.
- Do not attempt to operate this unit if the power cord has been frayed or broken
- Do not spill water or other liquids into or on to your unit.
- During long periods of non-use, disconnect the unit’s main power.

1.2 Safety Rules When Installing

- Place the machine on a stable and secure base. It should not be subjected to any jolts or vibrations.
- Never expose the unit to too high (>40ºC) nor too low temperature (<5ºC).
- NEVER EXPOSE THE UNIT TO RAIN OR ANY OTHERHUMIDITY.
- DO not expose the unit to direct sunshine or install the unit close to a source of heat (central heating,
radiator…); otherwise the screen may be damaged.
- Do not cover or block the ventilator behind the unit.

1.3 Safety Rules When in Use.

- Well clean areas to treat before treatment.
- Never touch the machine with damp or wet hands or feet.
- Never place the cavitation handpiece on the liver, kidney area.

INTRODUCE OF THE FUNCTION

1，Hydro dermabrasion
Hydradermabrasion (Hydra Facial) – the latest in skincare technology. Hydradermabrasion utilizes the
natural healing powers of water and oxygen to effortlessly exfoliate the skin without the use of hard
crystals or abrasive textured wands, generating deeply hydrated and healthier looking skin.

Application
1 Rejuvenate sun damaged skin-face, neck, shoulders, back, arms and legs.
2 Reduce age spots
3 Minimize of blotchy skin coloring
4 Reduce acne and superficial scars from past injury
5 Remove blackheads and white heads
6 Reduce oily skin
7 Improve overall skin health

2，Spray treatment
Mechanism of spray oxygen
Operating steps

1. Clean skin deeply.

2. Click the “Spray gun ”on as Fig.5 shows,
3. You can set the operation time on Fig.3
4. Mix 2 ~ 3 drip SPA essential oil diluted with purified water into small cup of the o2 sprayer,water
should be about 2 / 3 of the cup, and then tighten the lid tightly. Oxygen sprayer can only with liquid
products, other states product will cause pinhole jam.
4. Beautician hold the spray gun, press the control button to release oxygen, And pull backwards to spray
water mist.
5. Spray oxygen from top to bottom starting from the forehead to the neck, careful not to spray into the
eyes or nose, in the spray oxygen process, the beautician can appease, lift up, stretch wrinkles with the
other hand, more helpful for nutrition products penetrate the skin, strengthen skin elasticity, spray rate
should depend on the guests' absorb state of oxygen.

Cautions
The product should be liquid when using oxygen sprayer.
2.Avoid spraying into mouth or nose when spraying oxygen.
3.Clean the small cup and the pipe inside the sprayer every time use it, to avid jam.
Clean method:
pour the purified water into the small cup, and press the control button and
then pull back towards.
1.Supply nutrients and moisture for the skin rapidly, smooth skin, lightening stains,
improvechlorosis, dull conditions, make skin rosy, white,transparent, tender, tightening indeed, with special spa oils will
be better.
3, Vacuum pen
Vacuum pen is use vacuum/suction to suck the blackheads from the pores , makes our pores more cleaner .
And our vacuum pen is in new techinique that can be massage our skin during working , becuase it is not
always in sucktion , it will suck on and off , good for lymphatic drainage and active our cells .

4, Bio micocurrent
Microcurrent is a safe and effective technology for clients who wish to attainmaintain a healthier and younger looking
appearance.
Benifits :
Non-invasive facelift
Reduce and eliminate fine lines and wrinkles
Improve skin circulation
Improve hypergimentation and acne
Increase product penetration

5，Photon light (PDT)

The general introduction of PDT:
Praised as “Magic light”,Photon dynamical instrument is a biological active cold light,and not produce hi
gh heat.It applies low-energy and unique optical technology to skin care and treatment,natural and gentle;
has prominent effects,low fatalness and no side effect.
It’s skin nurse specialist,is fit for all kinds of skin,
especially useful for seriously irritated skin,acne skin and has notable effect for those in sub healthy state
to recover and do skin protection and treatment.

Photon dynamical nurse therapy is a new technology,using the photon power to do skin maintenance and
treatment,
transfer light energy to cell energy,then accelerate cell growth and blood circulation,
stimulate fiber cells to produce collagen proteins,
increase skin elasticity and take important part in rehabbing aging and acne skin,lightening flecks,
skin upgrade and tighten and easing burnable skin.

Application：
1. Improve symptoms such as aging and loosening skin,big pore,slender wrinkles.
2. Improve pigmentary pathological changes,such as freckle,sunburn,senile plaques.
3.Improve dark complexion caused by bad metabolism or poor circulation.
4. Repair and nurse the damaged skin.
5. Do detumescence,inflammation diminishing and scar elimination treatment for oil acne effectively
6，High frequency
High frequency function is beauty salon acne-prone skin treatment good assistant of the high frequency
current heating can penetrate the skin fiber, promote the blood circulation, help skin absorb nutrition,
eliminate waste, the heat can relax nerves, helping solvents penetrate the skin, reduce skin secretion, and
sterilization, the role of promoting wound healing, effect is remarkable. 1 use a special ultraviolet
radiation for local or punctiform light, have antiseptic effect, accelerate style skin wound healing. 2
remove surface spots, acne and treat black spots.

7. Diomand dermabrasion

Operating steps
1. Clean skin and make it dry.

2. According treated parts to choose appropriate Diamond dermabrasion working head, and

connect it into diamond dermabrasion handle.

Turn on the Power switch[3]. Make the function converting switch[15] to “ ”.

3. Turn [6]Vacuum adjusting knob to regulate the vacuum pressure. According t to the hip,

turning it to the clockwise is MAX, turning it to the counter clockwise is MIN. The beautician should

consider the nursing part and make sure the guests can accept the pressure.

4. Confine the treatment area, and beautician hold the diamond dermabrasion handle to move

closely on skin back and forth, with the finger moves with it.
Cautions
1. Do not to use when there is sensitive skin, swelling, injury,inflammation.

2. Keep your skin in a good condition after treatment, use care products which are gentle and

no harm, pay more attention to sun block.

3. Do not do shaving or use scrub until three days later.
Another diamond dermabrasion care must be in 30 minutes later.

8. Ultrasonic

Features

1 Ultrasonic waves with deep penetration are produced by high-frequency oscillation of 1 million times per

second. It is a kind of special instrument that emits a kind of waveform that can be transmitted by

surrounding medium. It has more powerful energy than ordinary sound waves. It has high frequency,

good directionality, strong penetrability and large expansion force. .

2 Due to the strong high-frequency oscillation, it can soften and massage the skin cells, promote the

blood circulation of the human micro-vessels, accelerate the metabolism and activate the skin cells, and

help absorb nutrients.

3 skin high-frequency micro-massage, can also eliminate the aging cells and discharge toxins to reduce

wrinkles, with a variety of beauty products or medicines, can achieve a variety of problems skin treatment,

improvement.

4 The safe frequency of ultrasound can also cause the resonance vibration of the cells themselves,

consume fat and improve cell water absorption and water saturation, so that the skin can restore clear

gloss and elasticity.

5 Ultrasonic high-frequency micro massage can eliminate the aging cells and discharge toxins to reduce

wrinkles. If combined with other cosmetics or medicines, it can achieve various problems of skin

treatment and improvement.

9. Skin scrubber
use of ultrasonic technology will change to 28000 times per second of electric shock waves to 28000
times per second of mechanical vibration wave the muscles of the body to me have osmosis.Can make
skin more deep cells produce excited,so long as you use this instrument is used together with the
corresponding potions or essence effect,can quickly eliminate shading wrinkles whelk corneous layer,able
to pore dirt thoroughly clean skin,make skin shining white,recover the flexibility.
Spare parts List :

Hydro
dermabrasion
High frequency
handle and 8tips

Spray mist gun vacuum pen

Bio microcurrent Photon light

Diomand
scrubber
dermabransion

ultrasonic Main machine

Others Power supply line and seal ring etc.

Install:

Figure 1

1. Open the package and get all the spare parts out ,
2. Connect the bio micro current handle on port ;
3. Hydrodermabrasion hose connect the inlet port ;
4. put the hydro dermabrasion outlet hose into the port ；；(Fig.1)
5. Connect the spray mist gun to port ；
6, Connect the vacuum pen or diamond dermabrasion to FULTER back of the machine ;
7. Conect the photon light,ultrasonic and scrubber to the port
8.,Connect the power line ;
9. Open the power switch .

Parts introduce:
1, 10.4” touch screen
2, Photon light
3, Water level adjust knob
4, Vacuum adjust knob
5, hydro dermabrasion liquid bottle
6, filter
7,Hydro dermabrasion handle
8,Bio microcurrent handle
9, Vacuum pen( 3 sizes)
10,Spray mist gun
11. Dermabransion
12. Ultrasonic
13.High frequency

* Before operating the machine, please check the connections. Then turn on and off the machine for 3 to 5
times. Then keep the machine running for 5 minutes to check the stability of the machine.

Specifications ：
Technology Hydro dermabrasion
Bio microcurrent
Vacuum pen
Spray mist gun
Photon light
Ultrasonic
Dermabransion
High frequency
Skin scrubber
Vacuum ≥100Kpa
Tech Hydro dermabrasion , photon light
Max output 250VA
Operate 10.4” Touch screen
Handles Hydro dermabrasion with 8 tips
Bio microcurrent 1 piece
Vacuum pen 3 different sizes
Photon light with 2 handles
Spray mist gun 1 piece
High frequency 1 piece
Ultrasonic 2 piece
Dermabransion 1 pcs
Skin scrubber 1 pcs
Voltage 100-240VAC, 50Hz/60Hz
Package size 55*52*146cm
Net weight 45 KG
Warranty One year for main machine and 3 months for spare
parts
Operating Interface :
1，The main interface is like below（Figure2），pls set the time like Figure 3；

Figure.2

Figure3
2,Touch Hydro to choose hydro dermabrasino treatment (Figure 3) ， 4 bottles to fill in different
solutions , pls choose anyone you want to use ,and adjust the vacuum you want ,then choose START
to begin: ;
6. Adjust the water level and vaccum from the knob .

Treatment:
1. clean the targeted treatment area and make it dry;
2. put appropriate amount of liquid product into selected liquid bottle; set time and working pressure
accordingly;

Click ” to start the treatment and ” to stop it;

3. Beautician hold the vacuum dermabrasion handle to move closely on skin back and forth, with finger
moves with it;
4. The machine will pause automatically when the treatment time is over.
5. Clean the leftovers with hot towel; use alcohol to sterilize the handpiece.

CAUTION
If the Liquid-collected bottle is full, the system will stop to work, show up on
the screen and cause beep;

Figure.4
3，Choose Spray and touch START to begin spray treatment (Figure 4)

Figure.5

4,PDT,adjust ENERGY ,and adjust MODE ,Chosse the right Channel and then touch STARTto begin
PDT treatment .

Figure.6

5, Diamond dermabransion&Vacuum pen ,connect the tube to the filter back of the machine，
touch VAC to ,adjust the proper pressure ,and then click START to begin blackhead remove
treatment .Figure.6

Figure.7

6, Bio microcurrent ,click BIO ,and then adjust the model and intensity , click START
to begin with face lifting treatment .
7. ultrasonic（face&eye），click ultrasonic（face）or ultrasonic（eye） ,and then adjust the modeland
intensity , click START to begin

8. Scrubber，click the scrubber，then click the START,adjust energy on the handpieces.

9. High frequency,turn right of the knob of high frequency,then click the START.

Figure.8

CONTRAINDICATIONS
- People who has fever, infectious diseases, acute diseases.
- People with heart disease or configured cardiac pacemaker.
- Patients with severe high blood pressure, tumor disease, asthma, deep vein
thrombosis, varicose veins, thyroid, cancer, falling sickness.
- People with hemorrhagic disease, trauma, vascular rupture, skin inflammation, skin Disease.
- Pregnant women
- Do not use at the abdomen during menstrual period
- Medical Plastic parts, or parts with metal inside
- People with an abnormal immune system
WARRANTY CARD
MANUFACTURER
PRODUCT NAME
MODEL NUMBER
PLACE OF ORIGIN Beijing, China
PRODUCTION DATE
PURCHASER
SELLER
PURCHASE DATE
ELECTRICAL □220V/50Hz □110V/60Hz