Scribd
Upload
55 views

C. Assessment For HNS 3

1. The document appears to be a test for a networking course assessing knowledge of networking concepts like network interface cards (NICs), protocols, pinging, and troubleshooting common network issues. 2. It contains two parts - the first with true/false statements about networking basics and the second being a multiple choice section testing functions of protocols, roles of NICs, and commands like pinging. 3. The test covers a wide range of foundational networking topics to identify and resolve problems like using ping to test DNS, verifying the NIC is working, and troubleshooting potential cable or switch issues.

Uploaded by

Yoni Man
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
55 views

C. Assessment For HNS 3

1. The document appears to be a test for a networking course assessing knowledge of networking concepts like network interface cards (NICs), protocols, pinging, and troubleshooting common network issues. 2. It contains two parts - the first with true/false statements about networking basics and the second being a multiple choice section testing functions of protocols, roles of NICs, and commands like pinging. 3. The test covers a wide range of foundational networking topics to identify and resolve problems like using ping to test DNS, verifying the NIC is working, and troubleshooting potential cable or switch issues.

Uploaded by

Yoni Man
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

KANENUS COLLEGE 2014

Name______________________________ Sex______ Dep’t____________Program______________

Continuous Assessment for HNS Level III

Course title: Identify and Resolve Network Problem

Total time allowed: 60min

PART I: - Say true if the statement is correct unless say false if the statement is
incorrect. (2pt each)

1. Network interface cards (NICs) provide the interface between cables and computers?
2. The data which is sent to another computer is must be understand by CPU without
convert in to digital signal?
3. Network interface cards, usually referred to as NICs, act as the logical interface or
connection between the computer and the network cable?
4. Protocol is not a rule and procedure of communication for communicating with other
computer?

5. To ping the card or the localhost, we can type either ping 127.0.0.1 or ping localhost?
6. The windows and MS-DOS users ping the computer from a MS-DOS prompt?
7. Data that is sent from one LAN to another along any of several available paths is said to
be routed?

PART II: - Choose the correct answer from the given alternative. (2pt each)

1. Which network command is essential for testing whether the DNS is working or not?
a. Ipconfig/all c. nslook e. All are correct
b. Ipconfig/renew d. nslookup
2. From the following one is the function of the protocols at the sending computer?
a. Break the data into smaller sections, called packets that the protocol can handle.
b. Take the data packets off the cable.
c. Copy the data from the packets to a buffer for reassembly.
d. All are correct except A
3. The protocols that support multipath LAN-to-LAN communications are known as?
a. Routed c. PING
b. ICMP d. routable protocol
4. A______________ is a combination of protocols?
a. Protocol c. Protocol stacks
b. Procedures d. protocol spaces
5. From the following which one is not the role of the NIC?
a. Send the data to another computer
KANENUS COLLEGE 2014

b. Control the flow of data between the computer and the cabling system
c. Prepare data from the computer for the network cable
d. Decrypt every encrypted data’s on the network
6. Which is the function of the protocols at the receiving computer?
a. Take the data packets off the cable
b. Pass the reassembled data to the application in a usable form
c. Prepare the data for transmission through the NIC and out onto the network
cable
d. All are correct except c
7. We can verify that the network card is capable of pinging or seeing itself by using the
ping command, which one is the correct syntax for pinging?
a. Ipconfig/ 192.168.10.25
b. Ping: 127.0.0.0
c. Ping 127.0.0.1
d. None of the above
8. If the link light isn't lit, perhaps indicates that?
a. There is no physical link
b. There is a cable break down
c. RJ-45 connecter at the end of the network cable linked firmly out of problem
d. All are correct except C
9. Switching device failures usually affect groups of computers, although it's possible for
only one PC to be affected?
a. Right c. All are correct
b. Wrong d. None of the above
10. If the link light is lit but you still suspect a cable problem, you should plug a known well
computer into the cable. If the PC establishes a network connection, the problem is with
your PC. Otherwise, you have a cable problem?
a. True c. None
b. False d. Except a b is correct

You might also like