Scribd
Upload
433 views

LV Panel Sizing Guidelines

The document provides guidelines for sizing low voltage (LV) panels, including: 1) It lists the rated voltages, currents, and standards that LV panels must meet, such as 690V AC voltage and 85kA short-circuit current ratings. 2) It describes the different types of LV panels (Types D, Ms, Mf, and Mw2) that can accommodate various feeders, busbars, and components up to ratings of 6300A and 3200A. 3) It provides specifications for component placement and cubicle widths/depths within the panels based on the component ratings, such as accommodating up to 8 feeders rated up to 250A within a 700mm

Uploaded by

dilipgm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
433 views

LV Panel Sizing Guidelines

The document provides guidelines for sizing low voltage (LV) panels, including: 1) It lists the rated voltages, currents, and standards that LV panels must meet, such as 690V AC voltage and 85kA short-circuit current ratings. 2) It describes the different types of LV panels (Types D, Ms, Mf, and Mw2) that can accommodate various feeders, busbars, and components up to ratings of 6300A and 3200A. 3) It provides specifications for component placement and cubicle widths/depths within the panels based on the component ratings, such as accommodating up to 8 feeders rated up to 250A within a 700mm

Uploaded by

dilipgm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

LV Panel Sizing guidelines

Schneider Electric - Blokset presentation – 25/02/2013 1


General data
Rated voltage (Ue) 690 V AC
Main Busbar rating Upto 6300 A ( Refer IP & Ambient )
Vertical Busbar rating up to 3200 A ( Refer IP & Ambient )
Rated short-time current (lcw) 85 ( VBB ) /100 ( HBB ) kA rms 1s (rated peak current lpk 187/220 kÂ)

Rated conditional short-circuit current (lcc) up to 85/100 kA 1s


Internal arc 85 kA 0.4 s
Earthing system TT-IT-TNS-TNC
Form 1/2b/3b/4/4b ( Form-4 , Type-7 on request )

Withdrawability FFF/WWW

Standard IEC 60947-2, IEC61641, IEC 60068-2-11, IEC 68-2-30,


, IEC61439-1/2

Seismic Withstand UBC/CBC (Uniform/California Building Code), Zone 4, floor & roof levels

Installation indoor environment (EMC) type 2

Communication buses Ethernet, Modbus SL, Profibus DP, DeviceNet, CanOpen.

Schneider Electric - Blokset presentation – 25/02/2013 2


Blokset, a complete range
● All LV power applications in one equipment.

Type D Type Ms Type Mf Type Mw2

Schneider Electric - Blokset presentation – 25/02/2013 3


Blokset, a complete range
●Height is uniform across all ratings—2200mm
● Available space for Feeders is 1800mm
(=36 Modules in Fixed columns ) for HBB rating upto 3200A
● Available space for Feeders is 1600mm
(=32 Modules in Fixed columns) for HBB rating >3200A
●Depth varies between 600mm & 1200mm
●600mm for Front Access(applicable only for cables…
NOTE : Cross check cable size and no. of runs )
●1000mm for Front/Rear Access 400mm

●1200mm for Front/Rear Access(For special Busrisers 600mm

& panels rated > 3200A in general)


200mm 700mm 400mm

●No Rear Clearance to the wall required for Panels with


Fully Front Access
●Rear Clearance of 750mm to the wall is required for
Panels with Rear Access ..For 4000A onwards,
1200mm rear clearance is required.
Schneider Electric - Blokset presentation – 25/02/2013 4
Blokset type D
●For ACB Feeders-Incomers and Buscouplers NW40b to NW63

● Incomer—ACB Feeder—Upto 3200A


● Width of the cubicle shall be 700mm (Except
in Dubai Projects); 800mm for Dubai
Projects. Also for 4 pole breakers with cable
type mechanical interlocking.
● Incomer—ACB Feeder—4000A & above
● Width of the cubicle shall be 1200mm &
Depth of the Panel shall be 1200mm
● Buscoupler—ACB Feeder-Upto 3200A
● Width of the cubicle shall be 700mm NT06 to NT16
+200mm (Except in Dubai Projects); 800mm
+ 200mm for Dubai Projects
● Outgoing—ACB(Icu # Ics) Feeder—Upto
1600A
● Width of the cubicle shall be 500mm (700mm NW08 to NW40
if the entry or exit is by Busrisers)
● Outgoing—ACB(Icu=Ics) Feeder—Upto
1600A
● Width
*depending of the cubicle shall be 700mm
upon architecture
Schneider Electric - Blokset presentation – 25/02/2013 5
Blokset type Mf
●Multi feeder Outgoing Cubicle – Non Starter Feeders-Fixed solution
● Outgoing— Fixed / Plug-in MCCB feeders without CT’s
● 8 Nos of ratings upto 250A can be accommodated in 1 Cubicle of
200 +500 mm Width
● Outgoing— Fixed / Plug-in MCCB feeders with CT’s
● 8 Nos of ratings upto 250A can be accommodated in 1 Cubicle of
200 +700 mm Width
● Outgoing— Fixed / Plug-in MCCB feeders with or without CT’s
● 6Modules for 400A Feeder
● 8 Modules for 630A Feeder
● Outgoing— Fixed / Drawout MCCB feeders with or without CT’s
● 12 Modules for 800A Feeder
● Outgoing—ACB(Icu # Ics) Feeders—Upto 1600A
● 2 Nos ACBs of rating upto 1600A in 1 Cubicle of
(200+700)mm wide / 1000mm depth (applicable for cable exits only)
● Outgoing—ACB(Icu=Ics) Feeder—Upto 1600A
● Width of the cubicle shall be 700mm

Schneider Electric - Blokset presentation – 25/02/2013 6


Blokset type Mf
●Multi feeder Outgoing Cubicle – Starter Feeders-Fixed solution

● Outgoing—DOL Feeders in 200+700mm wide column


● Upto 5.5 KW—4 Modules
● 7.5/11 KW—6 Modules

● Outgoing—Y/D Feeders in 200+700mm wide column


● 7.5/11 KW— 6 Modules
● 15/18.5 KW- 9 Modules
● 22/30/37 KW— 9 Modules
● 45 KW—12 Modules
● 55/75 KW—16 Modules

Schneider Electric - Blokset presentation – 25/02/2013 7


Blokset type Ms
●VFD Starter feeders Cubicles –Fixed solution

● Outgoing—VFD Starter feeders


● 12 Modules for Ratings upto 15KW
● 18 Modules for Ratings 18.5KW/22KW/30KW
NOTE : Above starters in 200+700mm wide column
● Full length section of 500mm width for 37KW/45KW/55KW
● Full length section of 700mm width for 75KW to 110KW
● Full length section of 900mm width for 132KW to 160KW
● Full length section of 1200mm width for 200KW/220KW
● Full length section of 900mm width & 1200mm depth for
250KW/315KW
● Full length section of 1200mm width & 1200mm depth for
355KW/400KW

Schneider Electric - Blokset presentation – 25/02/2013 8


Blokset type Ms
●Soft Starter feeders Cubicles –Fixed solution

● Outgoing—Soft Starter Feeders


● 12 Modules for Ratings upto 37KW
● 18 Modules for Rating 45KW
● Full length section of 500mm width for 55KW/75KW
● Full length section of 700mm width for 90KW
● Full length section of 900mm width for 110KW to 160KW
● Full length section of 1200mm width for 200KW to 250KW
● Full length section of 900mm width & 1200mm Depth for
355KW
● Full length section of 1200mm width & Depth for 400/500KW

Schneider Electric - Blokset presentation – 25/02/2013 9

You might also like