Scribd
Upload
132 views

ZK D180+User+Manual

Uploaded by

Sceaims Tech Support
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
132 views

ZK D180+User+Manual

Uploaded by

Sceaims Tech Support
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

User Manual

Hand Held Metal Detector: ZK-D180

Version: 1.0

Date: June. 2017

0
Details

1. Detection Area 2. Signal Strength Indicator

3. LED (The green light is the power indicator. The red light is
the alarm indicator.)

4. Low Sensitivity Button (long-press for low sensitivity)

5. Audio Alert 6. Handle 7. Battery Cover

8. Low Battery Indicator

9. Rechargeable Battery Socket

10. Switch (Sound, Off Or Vibration)

Applications

1. Electronic detection at airports, stations, and docks.

2. Security check by customs, public security, border defense,


and security departments.

3. Quality inspection of pharmaceutical, food, and commerce


industries.

4. Security check at critical spots and sports places.

5. Precious metal detection at places such as jewelry plants.

1
Detection Range
1. Thumbtack 3 5 cm

2. Steel ball (25 mm diameter) 12 cm

3. Handgun 20 cm

4. Dagger 25 cm

Performance
1. The sensitivity of the detector is determined primarily by the
size, shape and material of the detected objects.

2. The device has no requirement on the operation direction


and is easy and convenient to use.

3. The battery voltage is decreased to 7 V from 9 V and the


detection range does not change.

4. The battery consumption speed is low and the working


duration stands at more than 40 consecutive hours.

5. When the battery is dying, the low battery indicator blinks.

6. Power-on and power-off are indicated with sounds.

7. High sensitivity and low sensitivity are provided.

8. An external charging socket is provided.

9. A switch between acousto-optical and vibrating modes is


provided.

10. A signal strength indicator is provided.

11. Rechargeable batteries suit is provided.

2
Battery Loading and Changing

1. Remove the screws with a Philips screwdriver to open the


battery cover.

2. Load the 9 V battery based on the positive and negative


poles marked on the battery cover.

3. Close the battery cover and tighten the screws.

Operation
1. Turn on the switch (10). If a Dah is heard, the metal detector
is powered on, and the green light blinks. If there is no sound,
the battery is not loaded or the contact between the battery
and battery terminals is poor. If consecutive sounds are heard,
you need to change a new battery.

2. After hearing the power-on sound, you can perform the high
sensitivity test. Hold the handle and sweep the detector
around the object with the detection face near to it. The
detector makes an alarm sound and lights the red indicator
when metal is detected. If you stop the detection, the alarm
sound stops and the red indicator goes out.

3. Low sensitivity test: Long-press the low sensitivity button (4)


to exclude small-sized metal objects from detection. Sweep
the detector around the object. The detector makes an alarm
sound and lights the red indicator when metal is detected. If
you stop the detection, the alarm sound stops and the red
indicator goes out. The sensitivity is decreased by more than
five times. Metal that is detected in this mode are generally
of large size.

3
Notes
1. You need to power off the detector after using.

2. If the unit is not to be used for a certain length of time, it is


advisable to remove the battery to avoid battery leakage
with could cause serious damage to the detector.

3. An alarm is triggered only when the detector sweeps across


a metal object. If the detector remains still in front of a metal
object, no alarm will be triggered.

4. Do not charge the Non-rechargeable battery to avoid


damage.

5. You need to power off the detector during charging.

Specifications
Power Voltage: 9 V Rechargeable Battery

Power Consumption:

Operating Frequency: 22 kHz

Standby Current: < 5 mA

Operating Voltage: DC 7 V ~ 12 V

Working Temperature: -10℃~ +65℃

Weight: 260 g

Dimensions (L x W x H): 345 mm x 69 mm x 25 mm

4
ZKTeco Dongguan Industrial Park, No. 26, Pingshan 188,
Tangxia, Dongguan, China

Tel: +86 769-8210991/8210992/8210993


www.zkteco.com

5
© Copyright 2017. ZKTeco Inc. ZKTeco Logo is a registered trademark of ZKTeco or a related company.

All other product and company names mentioned are used for.

You might also like