SENSORS, TEST & CALIBRATION

Displacer Type
Liquid Level Switches

D E S C R I P T I O N
Magnetrol® displacement type level switches offer the
industrial user a wide choice of alarm and control
configurations. Every unit utilizes a simple buoyancy
principle and is well suited for simple or complex
applications, such as foaming or surging liquids or
agitated fluids, and usually costs less than other types of
level switches.

F E A T U R E S
• Narrow or wide level ranges achieved through
multiple switch mechanism capability.

• Up to 4 set points and 3 switches.

• Displacers adjustable at any point along the

suspension cable.

• 10 feet (3 meters) suspension cable standard.

• Anti-surge design eliminates the possibility of switch

shortcycling.

• Flanged or threaded mounting available.

Displacer
• Easy installation. Level Switch
• Field adjustable set point and switch differential. Displacer
Level Switch
• NACE models. with PROOF-ER

• Floating rooftop models.

• Proof-er® ground check.

A P P L I C A T I O N S
• Choice of displacers: Porcelain, 316 Stainless steel,
Karbate, Brass. • Foaming or surging • Paints
• Choice of switch mechanisms: Dry contact, liquids
• Varnishes
Pneumatic, Hermetically sealed. • Agitated fluids
• Heavy oils
• Available housings: NEMA 1, carbon steel for • Sewage handling
• Liquids with solids
pneumatics; TYPE 4X/7/9, Class I, Div. 1, Groups
• Dirty liquids
C & D, polymer coated aluminum; TYPE 4X/7/9,
Class I, Div. 1, Group B, polymer coated aluminum.
T E C H N O L O G Y
Operation is based upon simple buoyancy, whereby a
spring is loaded with weighted displacers which are
heavier than the liquid. Immersion of the displacers in
the liquid results in buoyancy force change, which 6 Pivot

moves the spring upward.

4 Return
Since the spring moves only when the level moves on a Spring
3
displacer, spring movement ¿ is always a small fraction 5

of the level travel between displacers ¡.

A magnetic sleeve ¬ is connected to the spring and

operates within a non-magnetic barrier tube √. Spring 1

movement causes the magnetic sleeve to attract a pivot- Rising

ed magnet ƒ, actuating a switch mechanism ≈ located Level
2
outside the barrier tube. Built-in limit stops prevent over
Falling
stroking of the spring, under level surge conditions. Level

P R O O F - E R C O N T R O L S
The purpose of the PROOF-ER is to check the operation the switch actuator simulating a high or high-high level
of a displacer control without having to raise the level in condition. When the chain is released, the PROOF-ER
the tank. This is accomplished by pulling downward on returns the actuator to its previous position to resume nor-
the PROOF-ER chain. A spring-loaded lever arm then lifts mal operation.

F L O A T I N G R O O F T O P C O N T R O L S
The floating rooftop control is designed for installation on A hollow brass displacer is required if the control is to
“barrier” (floating roof) tanks. The control will be fur- actuate in liquid as well as by the barrier. Consult factory
nished with a brass weight displacer to prevent sparking. for other options.

D I S P L A C E R S
Stainless steel displacers are rated 720 psig @ +100 °F Do not use porcelain displacers on non-vented boiler
(50 bar @ +38 °C). water condensate systems over +200 °F (+93 °C). Stainless
steel or Karbate is recommended.
Karbate displacers are limited to a minimum temperature
of +32 °F (0 °C) and a maximum temperature of +300 °F
(+149 °C).

D I S P L A C E R S S U S P E N S I O N C A B L E
Displacers are field-adjustable at any point along the standard). Monel® and Hastelloy® materials are available.
suspension cable (10 feet (3 meters) 316 stainless steel is Consult the factory for longer lengths.

2
S I N G L E S W I T C H M O D E L S
S E R I E S A 1 0 A N D S E R I E S A 1 5

SERIES A10 SERIES A15

PUMP OR VALVE CONTROL LEVEL ALARM APPLICATIONS
WIDE DIFFERENTIAL TYPE NARROW DIFFERENTIAL TYPE
These wide differential units are factory calibrated to These instruments are factory calibrated to operate over
actuate as a liquid level reaches a given displacer and a narrow level differential band and are ideally suited
to deactuate when the level reaches a second for liquid level alarm applications on either high or
displacer. low level.

The minimum differential band is approximately 6 in. The operating level is fully adjustable simply by
(152 mm) in water and varies somewhat with liquid spe- repositioning the displacer along its suspension cable.
cific gravity. The maximum differential is determined by The differential band varies slightly with liquid
the length of the displacer suspension cable. specific gravity.

D U A L S W I T C H M O D E L S
S E R I E S B 1 0 A N D S E R I E S B 1 5

SERIES B10 SERIES B15

WIDE DIFFERENTIAL TYPE NARROW DIFFERENTIAL TYPE
These wide differential tandem units are factory calibrated These instruments utilize two switches — each actuated
with a choice of several operating sequences designed to at a different level and each calibrated with a narrow
meet virtually any application. differential band.

OPERATING SEQUENCES
Model B10 units are available with a choice of switch
operating sequence. Five of the most popular
sequences are described on page 8. When ordering,
specify operating sequence number and specific gravity
of the liquid.

T R I - S W I T C H M O D E L S
S E R I E S C 1 0 A N D S E R I E S C 1 5

SERIES C10 SERIES C15

WIDE DIFFERENTIAL TYPE NARROW DIFFERENTIAL TYPE
These wide differential type switches are designed to These instruments are factory-calibrated to operate over
provide three electrically separate control signals in a a narrow level band while providing three electrically
selected sequence as liquid level varies. separate control signals as liquid level varies.
These units come factory-calibrated with a choice
of several operating sequences combining wide and
narrow level differential.

3
A G E N C Y A P P R O V A L S
AGENCY APPROVED MODEL AREA CLASSIFICATION

FM All with an electric switch mechanism and a housing Class I, Div 1, Groups C & D
listed as Type 4X/7/9 Class II, Div 1, Groups E, F & G
All with an electric switch mechanism and a housing Class I, Div 1, Groups B, C & D
listed as Type 4X/7/9 Class I, Div 1, Group B Class II, Div 1, Groups E, F & G
CSA All with a Series HS, F, 8 or 9 electric switch Class I, Div 2, Groups A, B, C & D
mechanism and a housing listed as CSA Type 4X
All with an electric switch mechanism and a housing Class I, Div 1, Groups C & D
listed as Type 4X/7/9 Class II, Div 1, Groups E, F & G
All with an electric switch mechanism and a housing Class I, Div 1, Groups B, C & D
listed as Type 4X/7/9 Class I, Div 1, Group B Class II, Div 1, Groups E, F & G
ATEX / IEC Ex ¡ All with an electric switch mechanism and an ATEX II 2 G Ex d IIC T6
ATEX housing ¿ 94/9/EC
IEC Ex Ex d IIC T6
IP66
CE All models Installation Category II
Pollution Degree 2

Low Voltage Directives

2006/95/EC
per Harmonized Standard
EN 61010-1/1993 & Amendment No. 1
¿ Controls with two or more HS or H1 switches are not ATEX approved.
¡ IEC Installation Instructions:
The cable entry and closing devices shall be Ex d certified suitable for the conditions of use and correctly installed.
For ambient temperatures above +55 °C or for process temperatures above +150 °C, suitable heat resistant cables shall be used.
Heat extensions (between process connection and housing) shall never be insulated.
Special conditions for safe use:
When the equipment is installed in process temperatures higher than +85 °C the temperature classification must be reduced
according to the following table as per IEC60079-0.

Maximum Process Temperature

Temperature Classification
< 85 °C T6
< 100 °C T5
< 135 °C T4
< 200 °C T3
These units are in conformity with IECEx KEM 05.0020X
< 300 °C T2 Classification Ex d IIC T6
< 450 °C T1 Tambient -40 °C to +70 °C

P R E S S U R E / T E M P E R A T U R E R A T I N G S

Threaded Models ¬√ 800 psig @ +100 °F (55 bar @ +38 °C)

250 psig @ +500 °F (17 bar @ +260 °C)
Flanged Models √ Limited to the pressure rating of the selected flange
or displacer. Flanges conform to ASME B16.5.
Low Pressure PROOF-ER Models 25 psig @ +200 °F (1.7 bar @ +93 °C)
Medium Pressure PROOF-ER Models 125 psig @ +300 °F (8.6 bar @ +149 °C)
¬ Models with stainless steel displacers are rated 720 psig @ +100 °F (50 bar @ 38 °C).
√ Cryogenic construction available upon request. Consult factory with application details.

4
S P E C I F I C A T I O N S
S W I T C H M E C H A N I S M S A N D E N C L O S U R E S

SERIES B, C, D, O & Q DRY CONTACT SWITCHES

SERIES J & K PNEUMATIC SWITCHES
• Series “B”, “C”, “O” and “Q” switches are general
purpose units with a selection of maximum liquid • Suited for process industry applications in hazardous
temperature ratings locations or where electrical power is not available

• Series “D” switch is designed for high DC current • Series “J” bleed type switch is intended for
applications general purpose applications
• Series “K” switch is specially designed to
provide non-bleed operation with a high
degree of vibration resistance

SERIES HS, F & 8 HERMETICALLY SEALED SWITCHES

• Entire mechanism and contacts are contained within a
SWITCH ENCLOSURES positively pressurized capsule with series ‘HS’
• TYPE 4X/7/9 aluminum enclosures • Ideal for use in salt and other corrosive atmospheres
• Designed and approved for Class I, Div. 1, Groups • Available in two models, one with easy access
C & D and Class I, Div. 1 Group B terminals, another with 12" (305 mm) long exposed
• Optional housing heaters and drains wiring leads which may be field connected away from
available for some enclosures the switch enclosure

• Pneumatic switch mechanisms available with

a NEMA 1 enclosure

BASIC ELECTRICAL RATINGS

Switch Series and Non-Inductive Ampere Rating
Voltage
B C D F HS O Q 8
120 VAC 15.00 15.00 10.00 2.50 5.00 15.00 15.00 1.00
240 VAC 15.00 15.00 — — 5.00 15.00 15.00 —
24 VDC 6.00 6.00 10.00 4.00 5.00 6.00 6.00 3.00
120 VDC 0.50 1.00 10.00 0.30 0.50 1.00 0.50 —
240 VDC 0.25 0.50 3.00 — 0.25 0.50 0.25 —

5
S P E C I F I C A T I O N S
MODEL A10 DIMENSIONAL DATA AND ACTUATION LEVELS

INCHES (MM)

Outline Dimensions Displacer Type C D E

Displacer Threaded Mounting Flanged Mounting Porcelain 2.56 (65) 7.25 (184) 3.62 (91)
Type A B A B
Stainless Steel 2.50 (63) 9.00 (228) 4.50 (114)
5.00 242.00 7.00 244.00 or Karbate
Porcelain (127) (6146) (177) (6197)
Stainless Steel 4.75 242.00 6.75 244.00 Electrical Connections
or Karbate (120) (6146) (171) (6197)
TYPE 4X/7/9, Group B: 1" NPT
NEMA 1 Pneumatic: 1⁄4" NPT

STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY

Displacer Liquid 0.60 0.70 0.80 0.90 1.00
Type Temp.
°F F G F G F G F G F G

100 5.30 (134) 1.50 (38) 4.10 (104) 1.20 (30) 3.20 (81) 1.10 (27) 2.50 (63) 1.00 (25) 2.00 (50) 0.90 (22)
200 — — 4.80 (121) 2.00 (50) 3.80 (96) 1.80 (45) 3.00 (76) 1.60 (40) 2.50 (63) 1.50 (38)
Porcelain
300 — — — — 4.30 (109) 2.40 (60) 3.40 (86) 2.10 (53) 2.90 (73) 1.90 (48)
400 — — — — — — 3.40 (86) 2.60 (66) 2.90 (73) 2.40 (60)
Stainless 100 7.00 (177) 2.40 (60) 5.30 (134) 2.00 (50) 4.10 (104) 1.80 (45) 3.10 (78) 1.60 (40) 2.40 (60) 1.40 (35)
Steel 200 — — 5.90 (149) 2.80 (71) 4.70 (119) 2.50 (63) 3.60 (91) 2.20 (55) 2.80 (71) 2.00 (50)
or Karbate 300 — — — — 5.10 (129) 3.10 (78) 4.00 (101) 2.70 (68) 3.20 (81) 2.40 (60)
Stainless 400 — — — — — — 4.40 (111) 3.20 (81) 3.60 (91) 2.90 (73)
Steel 500 — — — — — — — — 3.90 (99) 3.30 (83)
Note: All levels ±0.25" (6).

5.93 5.93
(151) (151)
3.87 3.87
(98) (98)

8.46 8.46
10.12 (214) 10.12 (214)
(257) (257)
Elect. Elect.
Conn. Plug Conn. Plug

3.13
(79) 2 1/2" NPT Flange

A Min.
A Min.

Rising Level Rising Level

B Actuation B Actuation
Max. D Max. D
F F

Falling Level Falling Level

E Actuation E Actuation
G G

C C

Model A10 Model A10

with Threaded Mounting with Flanged Mounting

6
S P E C I F I C A T I O N S
MODEL A15 DIMENSIONAL DATA AND ACTUATION LEVELS *
INCHES (MM)

Outline Dimensions Displacer Type C D

Displacer Threaded Mounting Flanged Mounting Porcelain 2.56 (65) 7.25 (184)
Type A B A B
Stainless Steel, 2.50 (63) 9.00 (228)
5.62 242.00 7.62 244.00 Karbate or Hollow
Porcelain Brass
(142) (6146) (193) (6197)
Stainless Steel, 5.62 242.00 7.62 244.00
Karbate or (142) (6146) (193) (6197) Electrical Connections
Hollow Brass TYPE 4X/7/9, Group B: 1" NPT
NEMA 1 Pneumatic: 1⁄4" NPT

STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY

0.50 0.60 0.70 0.80 0.90 1.00
Displacer Liquid
Type Temp.
°F E F E F E F E F E F E F
100 — — 5.10 (129) 2.10 (53) 4.50 (114) 1.70 (43) 3.90 (99) 1.70 (43) 3.50 (88) 1.50 (38) 3.20 (81) 1.40 (35)
200 — — 5.60 (142) 2.60 (66) 4.90 (124) 2.10 (53) 4.30 (109) 2.10 (53) 3.80 (96) 1.80 (45) 3.50 (88) 1.70 (43)
Porcelain 300 — — — — 5.20 (132) 2.40 (60) 4.50 (114) 2.30 (58) 4.10 (104) 2.10 (53) 3.70 (93) 1.90 (48)
400 — — — — 5.60 (142) 2.80 (71) 4.80 (121) 2.60 (66) 4.30 (109) 2.30 (58) 3.90 (99) 2.10 (53)
500 — — — — — — 5.10 (129) 2.90 (73) 4.60 (116) 2.60 (66) 4.20 (106) 2.40 (60)
Stainless 100 5.40 (137) 2.00 (50) 4.50 (114) 1.60 (40) 3.90 (99) 1.40 (35) 3.40 (86) 1.20 (30) 3.00 (76) 1.10 (27) 2.70 (68) 1.00 (25)
Steel, 200 6.00 (152) 2.60 (66) 5.00 (127) 2.10 (53) 4.30 (109) 1.80 (45) 3.70 (93) 1.60 (40) 3.30 (83) 1.40 (35) 3.00 (76) 1.30 (33)
Karbate or
Hollow 300 6.40 (162) 3.00 (76) 5.30 (134) 2.40 (60) 4.60 (116) 2.10 (53) 4.00 (101) 1.80 (45) 3.60 (91) 1.70 (43) 3.20 (81) 1.50 (38)
Brass
Stainless 400 6.90 (175) 3.50 (88) 5.70 (144) 2.80 (71) 4.90 (124) 2.40 (60) 4.30 (109) 2.10 (53) 3.80 (96) 1.90 (48) 3.40 (86) 1.70 (43)
Steel 500 — — 6.10 (154) 3.20 (81) 5.20 (132) 2.80 (71) 4.60 (116) 2.40 (60) 4.10 (104) 2.20 (55) 3.70 (93) 2.00 (50)

Note: All levels ±0.25" (6).

*See page 21 for PROOF-ER and/or floating rooftop switch dimensions.

5.93 5.93
(151) (151)
3.87 3.87
(98) (98)

6.25 6.25
7.94 (159) 7.94 (159)
(201) Elect. (201)
Elect.
Conn. Plug Conn. Plug
3.13
(79) 2 1/2" NPT
Flange

A Min.
A Min.

B
B
Max. Rising Level
D Max. Rising Level
Actuation D Actuation

E
E
Falling Level
Falling Level
F Actuation
F Actuation

C
C

Model A15 Model A15

with Threaded Mounting with Flanged Mounting

7
S P E C I F I C A T I O N S
M O D E L B 1 0 D I M E N S I O N A L D A T A

INCHES (MM)

Outline Dimensions MODEL B10 WITH DISPLACER

ARRANGEMENTS 3, 4, AND 5
Displacer Threaded Mounting Flanged Mounting
Type A B A B Displacer Type C D E F
4.88 242.00 6.88 244.00 2.56 5.02 5.02 5.02
Porcelain Porcelain
(123) (6146) (174) (6197) (65) (127) (127) (127)
Stainless Steel 4.75 242.00 6.75 244.00 Stainless Steel 2.50 6.00 6.00 6.00
or Karbate (120) (6146) (171) (6197) or Karbate (63) (152) (152) (152)

MODEL B10 WITH DISPLACER Electrical Connections

ARRANGEMENTS 1 AND 2
TYPE 4X/7/9
Displacer Type C D E Group B: 1" NPT
Porcelain 2.56 (65) 10.04 (255) 5.02 (127)
Stainless Steel 2.50 (63) 12.00 (304) 6.00 (152)
or Karbate

5.93 5.93
(151) (151)
3.87 3.87
(98) (98)

8.46 8.46
10.12 (214) 10.12 (214)
(257) (257)
Elect. Elect.
Conn. Plug Conn. Plug

3.13
(79) 2 1/2" NPT Flange

A Min.
A Min.

B B
Max. Max.

C C

Model B10 Model B10

with Threaded Mounting with Flanged Mounting

8
S P E C I F I C A T I O N S
M O D E L B 1 0 A C T U A T I O N L E V E L S

INCHES (MM)

B10 STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY WITH DISPLACER ARRANGEMENT 1
Displacer Liquid
Type Temp. °F Level 0.60 - 0.64 0.65 - 0.71 0.72 - 0.73 0.74 - 0.82 0.83 - 0.92 0.93 - 1.00 1.01 - 1.07
7.79 - 7.04 7.66 - 6.65 7.22 - 7.06 6.91 - 5.81 6.73 - 5.65 5.55 - 4.86 4.97 - 4.53
F (197 - 178) (194 - 168) (133 - 179) (175 - 147) (180 - 143) (140 - 123) (126 - 115)
2.62 - 2.19 2.88 - 2.28 2.91 - 2.81 2.71 - 2.03 2.99 - 2.28 2.21 - 1.76 1.90 - 1.63
100 G (56 - 55) (73 - 57) (73 - 71) (68 - 51) (75 - 57) (56 - 44) (48 - 41)
2.01 - 1.89 1.86 - 1.70 1.68 - 1.65 1.63 - 1.47 1.45 - 1.31 1.30 - 1.21 1.02 - 0.97
H (51 - 48) (47 - 43) (42 - 41) (41 - 37) (36 - 33) (33 - 30) (25 - 24)
7.91 7.72 - 6.71 6.56 - 6.41 6.73 - 5.66 6.37 - 5.33 6.15 - 5.42 5.02 - 4.57
F (200) (196 - 170) (166 - 162) (170 - 143) (161 - 135) (156 - 137) (127 - 116)
3.06 2.95 - 2.34 2.25 - 2.16 2.54 - 1.87 2.63 - 1.95 2.81 - 2.32 1.94 - 1.67
200 G (77) (74 - 59) (57 - 54) (64 - 47) (66 - 49) (71 - 58) (49 - 42)
2.76 2.72 - 2.49 2.45 - 2.42 2.39 - 2.15 2.13 - 1.92 1.90 - 1.77 1.58 - 1.49
H (70) (69 - 63) (62 - 61) (60 - 54) (54 - 48) (48 - 44) (40 - 37)
Porcelain
7.48 - 6.34 7.04 - 5.93 6.75 - 5.98 5.57 - 5.10
F — — — (189 - 161) (178 - 150) (171 - 151) (141 - 129)
3.29 - 2.55 3.30 - 2.56 3.41 - 2.87 2.50 - 2.19
300 G — — — (83 - 64) (83 - 65) (86 - 72) (63 - 55)
3.14 - 2.83 2.80 - 2.53 2.50 - 2.32 2.13 - 2.01
H — — — (79 - 71) (71 - 64) (63 - 58) (54 - 51)
6.12 - 5.62
F — — — — — — (155 - 142)
3.05 - 2.72
400 G — — — — — — (77 - 69)
2.68 - 2.53
H — — — — — — (68 - 64)
Note: All levels ±0.25" (6).

Displacer Liquid
Type Temp. °F Level 1.08 - 1.12 1.13 - 1.17 1.18 - 1.27 1.28 - 1.30 1.31 - 1.39 1.40 - 1.50
4.47 - 4.20 4.90 - 4.64 4.57 - 4.05 3.99 - 3.89 4.23 - 3.82 3.77 - 3.33
F
(113 - 106) (124 - 117) (116 - 102) (101 - 98) (107 - 97) (95 - 84)
1.59 - 1.43 2.16 - 1.99 1.94 - 1.60 1.57 - 1.50 1.86 - 1.59 1.56 - 1.26
100 G
(40 - 36) (54 - 50) (49 - 40) (39 - 38) (47 - 40) (39 - 32)
0.96 - 0.92 0.92 - 0.88 0.88 - 0.81 0.81 - 0.80 0.79 - 0.74 0.74 - 0.69
H
(24 - 23) (23 - 22) (22 - 20) (20 - 20) (20 - 18) (18 - 17)
4.66 - 4.39 4.33 - 4.08 4.32 - 3.81 4.29 - 4.18 4.13 - 3.73 3.93 - 3.47
F
(118 - 111) (109 - 103) (109 - 96) (108 - 106) (104 - 94) (99 - 88)
1.79 - 1.62 1.58 - 1.43 1.69 - 1.36 1.87 - 1.80 1.76 - 1.49 1.71 - 1.40
200 G
(45 - 41) (40 - 36) (42 - 34) (47 - 45) (44 - 37) (43 - 35)
1.48 - 1.42 1.41 - 1.36 1.35 - 1.25 1.24 - 1.23 1.22 - 1.15 1.14 - 1.06
H
(37 - 36) (35 - 34) (34 - 31) (31 - 31) (30 - 29) (28 - 26)
5.18 - 4.89 4.82 - 4.56 4.79 - 4.25 4.73 - 4.61 4.56 - 4.13 4.32 - 3.84
F
(131 - 124) (122 - 115) (121 - 107) (120 - 117) (115 - 104) (109 - 97)
2.31 - 2.12 2.08 - 1.91 2.16 - 1.80 2.31 - 2.23 2.19 - 1.90 2.11 - 1.78
Porcelain 300 G
(58 - 53) (52 - 48) (54 - 45) (58 - 56) (55 - 48) (53 - 45)
1.99 - 1.92 1.90 - 1.84 1.82 - 1.69 1.68 - 1.66 1.64 - 1.55 1.54 - 1.43
H
(50 - 48) (48 - 46) (45 - 42) (42 - 42) (41 - 39) (39 - 36)
5.70 - 5.39 5.32 - 5.04 5.26 - 4.69 5.17 - 5.04 4.98 - 4.53 4.72 - 4.22
F
(144 - 136) (135 - 128) (133 - 119) (131 - 128) (126 - 115) (119 - 107)
2.82 - 2.62 2.57 - 2.39 2.63 - 2.24 2.74 - 2.66 2.61 - 2.30 2.51 - 2.15
400 G
(71 - 66) (65 - 60) (66 - 56) (69 - 67) (66 - 58) (63 - 54)
2.51 - 2.42 2.40 - 2.32 2.30 - 2.13 2.12 - 2.08 2.07 - 1.95 1.94 - 1.81
H
(63 - 61) (60 - 58) (58 - 54) (53 - 52) (52 - 49) (49 - 45)
6.22 - 5.89 5.81 - 5.52 5.74 - 5.13 5.60 - 5.47 5.41 - 4.93 5.12 - 4.59
F
(157 - 149) (147 - 140) (145 - 130) (142 - 138) (137 - 125) (130 - 116)
3.34 - 3.12 3.07 - 2.86 3.11 - 2.68 3.18 - 3.09 3.04 - 2.70 2.91 - 2.52
500 G
(84 - 79) (77 - 72) (78 - 68) (80 - 78) (77 - 68) (73 - 64)
3.03 - 2.92 2.89 - 2.79 2.77 - 2.57 2.55 - 2.51 2.50 - 2.35 2.33 - 2.18
H
(76 - 74) (73 - 70) (70 - 65) (64 - 63) (63 - 59) (59 - 55)
Note: All levels ±0.25" (6).
9
S P E C I F I C A T I O N S
M O D E L B 1 0 A C T U A T I O N L E V E L S ( c o n t . )

INCHES (MM)
B10 STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY WITH DISPLACER ARRANGEMENT 1 (cont.)
Displacer Liquid
Type Temp. °F Level 0.50 - 0.58 0.59 - 0.71 0.72 - 0.79 0.80 - 0.85 0.86 - 1.00 1.01 - 1.03
9.91 - 7.72 9.19 - 6.62 8.44 - 7.16 7.66 - 6.86 6.71 - 4.93 4.82 - 4.61
F
(251 - 196) (233 - 168) (214 - 181) (194 - 174) (170 - 125) (122 - 117)
3.46 - 2.16 3.72 - 2.08 3.96 - 3.07 3.63 - 3.07 2.96 - 1.71 1.63 - 1.48
100 G
(86 - 54) (94 - 52) (100 - 77) ((92 - 77) (75 - 43) (41 - 37)
2.51 - 2.16 2.13 - 1.77 1.74 - 1.59 1.57 - 1.48 1.46 - 1.25 1.24 - 1.22
H
(63 - 54) (54 - 44) (44 - 40) (39 - 37) (37 - 31) (31 - 30)
10.22 - 7.98 7.74 - 7.44 7.50 - 6.30 6.15 - 5.44 6.97 - 5.15
F —
(259 - 202) (196 - 188) (190 - 160) (156 - 138) (177 - 130)
Stainless
Steel 3.76 - 2.42 2.27 - 1.89 3.02 - 2.22 2.12 - 1.64 3.22 - 1.93
200 G —
and (95 - 61) (57 - 48) (76 - 56) (53 - 41) (81 - 49)
Karbate 3.67 - 3.16 3.11 - 2.58 2.55 - 2.32 2.29 - 2.16 2.13 - 1.84
H —
(93 - 80) (78 - 65) (64 - 58) (58 - 54) (54 - 46)
9.68 - 7.25 8.31 - 7.04 6.88 - 6.12 7.65 - 5.73
F — —
(245 - 184) (211 - 178) (174 - 155) (194 - 145)
4.30 - 2.70 3.83 - 2.96 2.84 - 2.32 3.89 - 2.51
300 G — —
(109 - 68) (97 - 75) (72 - 58) (98 - 63)
4.03 - 3.40 3.36 - 3.06 3.02 - 2.84 2.81 - 2.42
H — —
(102 - 86) (85 - 77) (76 - 72) (71 - 61)
9.11 - 7.77 7.60 - 6.80 8.32 - 6.32
F — — —
(231 - 197) (193 - 172) (211 - 160)
4.63 - 3.69 3.57 - 3.01 4.57 - 3.09
400 G — — —
(117 - 93) (90 - 76) (116 - 78)
— — 4.16 - 3.79 3.75 - 3.53 3.48 - 3.00
H —
Stainless (105 - 96) (95 - 89) (88 - 76)
Steel 9.00 - 6.90
F — — — — —
(228 - 175)
5.24 - 3.67
500 G — — — — —
(133 - 93)
4.16 - 3.58
H — — — — —
(105 - 90)
Note: All levels ±0.25" (6).

Actuation Actuation
E
D Upper F
Switch Upper
F Actuation Switch

G Actuation
Lower
Switch Lower
D
Switch
Actuation G Actuation
E
H
H

Model B10
Displacer Arrangement 1 Model B10
Displacer Arrangement 2

10
S P E C I F I C A T I O N S
M O D E L B 1 0 A C T U A T I O N L E V E L S ( c o n t . )

INCHES (MM)

B10 STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY WITH DISPLACER ARRANGEMENT 2
Displacer Liquid
Type Temp. °F Level 0.60 - 0.64 0.65 -0.71 0.72 - 0.73 0.74 - 0.82 0.83 - 0.92 0.93 - 1.00 1.01 - 1.07
2.77 - 2.01 2.63 - 1.62 2.67 - 2.51 2.58 - 1.42 3.16 - 1.94 1.82 - 1.04 1.69 - 1.23
F
(70 - 51) (66 - 41) (67 - 63) (65 - 36) (80 - 49) (45 - 26) (42 - 31)
7.27 - 6.84 7.54 - 6.93 7.56 - 7.46 7.36 - 6.68 7.64 - 6.93 6.86 - 6.41 5.15 - 4.89
100 G (184 - 173) (191 - 176) (192 - 189) (186 - 169) (194 - 176) (174 - 162) (130 - 124)
2.67 - 2.53 3.29 - 3.05 3.73 - 3.68 3.64 - 3.32 4.32 - 3.93 3.90 - 3.65 2.42 - 2.31
H
(67 - 64) (83 - 77) (94 - 93) (92 - 84) (109 - 99) (99 - 92) (61 - 58)
3.15 2.96 - 1.93 1.77 - 1.62 2.64 - 1.47 2.79 - 1.61 2.79 - 1.94 1.56 - 1.11
F
(80) (75 - 49) (44 - 41) (67 - 37) (70 - 40) (70 - 49) (39 - 28)
7.71 7.60 - 6.99 6.90 - 6.81 7.19 - 6.52 7.28 - 6.60 7.46 - 6.97 5.19 - 4.92
200 G
(195) (193 - 177) (175 - 172) (182 - 165) (184 - 167) (189 - 177) (131 - 124)
3.40 3.36 - 3.10 3.07 - 3.03 3.46 - 3.16 3.96 - 3.61 4.50 - 4.21 2.46 - 2.35
H
(86) (85 - 78) (77 - 76) (87 - 80) (100 - 91) (114 - 106) (62 - 59)
Porcelain
3.39 - 2.15 3.47 - 2.22 3.39 - 2.50 2.11 - 1.63
F — — —
(86 - 54) (88 - 56) (86 - 63) (53 - 41)
7.94 - 7.20 7.95 - 7.21 8.06 - 7.53 5.75 - 5.45
300 G — — —
(201 - 182) (201 - 183) (204 - 191) (146 - 138)
4.21 - 3.84 4.63 - 4.21 5.10 - 4.77 3.02 - 2.87
H — — —
(106 - 97) (117 - 106) (129 - 121) (76 - 72)
2.67 - 2.15
F — — — — — —
(67 - 54)
6.30 - 5.97
400 G — — — — — —
(160 - 151)
3.57 - 3.39
H — — — — — — (90 - 86)
Note: All levels ±0.25" (6).

Displacer Liquid
Type Temp. °F Level 1.08 - 1.12 1.13 - 1.17 1.18 - 1.27 1.28 - 1.30 1.31 - 1.39 1.40 - 1.50
1.16 - 0.89 2.04 - 1.75 1.68 - 1.10 1.04 - 0.92 2.05 - 1.56 1.50 - 0.97
F
(29 - 22) (51 - 44) (42 - 27) (26 - 23) (52 - 39) (38 - 24)
4.84 - 4.68 5.41 - 5.24 5.20 - 4.85 4.82 - 4.75 5.11 - 4.84 4.81 - 4.51
100 G
(122 - 118) (137 - 133) (132 - 123) (122 - 120) (129 - 122) (122 - 114)
2.29 - 2.22 2.97 - 2.88 2.86 - 2.68 2.66 - 2.63 3.01 - 2.85 2.84 - 2.67
H
(58 - 56) (75 - 73) (72 - 68) (67 - 66) (76 - 72) (72 - 67)
1.68 - 1.38 1.31 - 1.05 1.71 - 1.13 1.75 - 1.62 1.56 - 1.09 1.53 - 1.00
F
(42 - 35) (33 - 26) (43 - 28) (44 - 41) (39 - 27) (38 - 25)
5.04 - 4.88 4.84 - 4.68 4.94 - 4.62 5.12 - 5.05 5.01 - 4.75 4.96 - 4.65
200 G
(128 - 123) (122 - 118) (125 - 117) (130 - 128) (127 - 120) (125 - 118)
2.49 - 2.41 2.39 - 2.33 2.60 - 2.44 2.97 - 2.93 2.91 - 2.76 2.99 - 2.82
H
(63 - 61) (60 - 59) (66 - 61) (73 - 70) (73 - 70) (75 - 77)
2.19 - 1.88 1.81 - 1.52 2.19 - 1.57 2.18 - 2.05 1.98 - 1.49 1.93 - 1.37
F
(55 - 47) (45 - 38) (55 - 39) (50 - 37) (50 - 37) (49 - 34)
5.56 - 5.37 5.33 - 5.16 5.41 - 5.06 5.56 - 5.48 5.44 - 5.15 5.36 - 5.03
Porcelain 300 G
(141 - 136) (135 - 131) (137 - 128) (138 - 130) (138 - 130) (136 - 127)
3.01 - 2.91 2.89 - 2.80 3.07 - 2.88 3.40 - 3.36 3.33 - 3.16 3.39 - 3.19
H
(76 - 73) (73 - 71) (77 - 73) (84 - 80) (84 - 80) (86 - 81)
2.71 - 2.38 2.30 - 2.00 2.66 - 2.01 2.62 - 2.48 2.41 - 1.90 2.33 - 1.74
F
(68 - 60) (58 - 50) (67 - 51) (61 - 48) (61 - 48) (59 - 44)
6.08 - 5.87 5.82 - 5.64 5.89 - 5.49 5.99 - 5.91 5.87 - 5.55 5.76 - 5.40
400 G
(154 - 149) (147 - 143) (149 - 139) (152 - 150) (149 - 140) (146 - 137)
3.52 - 3.41 3.38 - 3.28 3.55 - 3.32 3.84 - 3.79 3.76 - 3.56 3.79 - 3.56
H
(89 - 86) (85 - 83) (90 - 84) (97 - 96) (95 - 90) (96 - 90)
3.23 - 2.88 2.80 - 2.48 3.13 - 2.45 3.05 - 2.91 2.84 - 2.30 2.73 - 2.11
F
(82 - 73) (71 - 62) (79 - 62) (77 - 73) (72 - 58) (69 - 53)
6.59 - 6.37 6.32 - 6.12 6.36 - 5.93 6.43 - 6.34 6.29 - 5.95 6.16 - 5.77
500 G
(167 - 161) (160 - 155) (161 - 150) (163 - 161) (159 - 151) (156 - 146)
4.04 - 3.91 3.88 - 3.76 4.02 - 3.76 4.28 - 4.21 4.19 - 3.97 4.19 - 3.93
H
(102 - 99) (98 - 95) (102 - 95) (108 - 106) (106 - 100) (106 - 99)
Note: All levels ±0.25" (6).
11
S P E C I F I C A T I O N S
M O D E L B 1 0 A C T U A T I O N L E V E L S ( c o n t . )

INCHES (MM)
B10 STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY WITH DISPLACER ARRANGEMENT 2 (cont.)
Displacer Liquid
Type Temp. °F Level 0.50 - 0.58 0.59 - 0.71 0.72 - 0.79 0.80 - 0.85 0.86 - 1.00 1.01 - 1.03
3.77 - 1.60 4.10 - 1.38 4.43 - 2.97 4.58 - 3.60 3.42 - 1.26 1.13 - 0.88
F
(95 - 40) (104 - 35) (112 - 75) (24 - 91) (86 - 31) (28 - 22)
9.46 - 8.16 9.72 - 8.08 9.96 - 9.07 9.63 - 9.07 8.96 - 7.71 7.63 - 7.48
100 G
(240 - 207) (246 - 205) (252 - 230) (244 - 230) (227 - 195) (193 - 189)
3.73 - 3.21 4.86 - 4.04 5.97 - 5.44 6.05 - 5.69 5.63 - 4.84 4.79 - 4.70
H
(94 - 81) (123 - 102) (151 - 138) (153 - 144) (143 - 122) (121 - 119)
4.22 - 1.98 1.74 - 1.44 3.74 - 2.35 2.17 - 1.33 3.89 - 1.66
F —
(107 - 50) (44 - 36) (94 - 59) (55 - 33) (98 - 42)
Stainless
Steel 9.76 - 8.42 8.27 - 6.88 9.02 - 8.22 8.12 - 7.64 9.22 - 7.93
200 G —
and (247 - 213) (210 - 174) (229 - 208) (206 - 194) (234 - 201)
Karbate 4.03 - 3.47 3.41 - 2.84 5.04 - 4.59 4.53 - 4.27 5.88 - 5.06
H —
(102 - 88) (86 - 62) (128 - 116) (115 - 108) (149 - 128)
4.87 - 2.26 4.55 - 3.08 2.89 - 2.02 4.56 - 2.24
F — —
(123 - 57) (115 - 78) (73 - 51) (115 - 56)
10.30 - 8.70 9.83 - 8.96 8.84 - 8.32 9.89 - 8.51
300 G — —
(261 - 220) (249 - 227) (224 - 211) (251 - 216)
5.52 - 4.66 5.84 - 5.33 5.26 - 4.95 6.56 - 5.64
H — —
(140 - 118) (148 - 135) (133 - 125) (166 - 131)
5.35 - 3.82 3.62 - 2.70 5.24 - 2.82
F — — —
(135 - 97) (91 - 68) (133 - 71)
10.63 - 9.69 9.57 - 9.01 10.57 - 9.09
400 G — — —
(270 - 246) (243 - 228) (183 - 157)
6.65 - 6.06 5.99 - 5.63 7.24 - 6.22
H — — —
Stainless (168 - 153) (152 - 143) (183 - 157)
Steel 5.91 - 3.41
F — — — — —
(150 - 86)
11.24 - 9.67
500 G — — — — —
(285 - 245)
7.91 - 6.80
H — — — — —
(200 - 172)
Note: All levels ±0.25" (6).

Actuation
E
F
Upper
Switch

Actuation

D Lower
Switch
G Actuation

Model B10
Displacer Arrangement 2

12
S P E C I F I C A T I O N S
M O D E L B 1 0 A C T U A T I O N L E V E L S ( c o n t . )

INCHES (MM)
B10 STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY WITH DISPLACER ARRANGEMENTS 3, 4, AND 5

Displacer Liquid
Temp.
Type °F Level 0.60 - 0.64 0.65 - 0.71 0.72 - 0.73 0.74 - 0.82 0.83 - 0.92 0.93 - 1.00 1.01 - 1.07
2.77 - 2.01 2.63 - 1.62 2.67 - 2.51 2.58 - 1.42 3.16 - 1.94 1.82 - 1.04 1.69 - 1.23
G
(70 - 51) (66 - 41) (67 - 63) (65 - 36) (80 - 49) (45 - 26) (42 - 31)
2.24 - 1.81 2.51 - 1.90 2.53 - 2.43 2.34 - 1.66 2.62 - 1.91 1.84 - 1.38 1.53 - 1.26
100 H Actuation
(56 - 45) (63 - 48) (64 - 61) (59 - 42) (66 - 48) (46 - 35) (38 - 32) D
2.01 - 1.89 1.86 - 1.70 1.68 - 1.65 1.63 - 1.47 1.45 - 1.31 1.30 - 1.21 1.02 - .097 G
J
(51 - 48) (47 - 43) (42 - 41) (41 - 37) (36 - 33) (33 - 30) (25 - 24) Upper
3.15 2.96 - 1.93 1.77 - 1.62 2.64 - 1.47 2.79 - 1.61 2.79 - 1.94 1.56 - 1.11 Switch
G
(80) (75 - 49) (44 - 41) (67 - 37) (70 - 40) (70 - 49) (39 - 28)
E Actuation
2.69 2.57 - 1.96 1.87 - 1.78 2.16 - 1.50 2.25 - 1.58 2.44 - 1.94 1.40 - 1.14
200 H H
(68) 965 - 49) (47 - 45) (54 - 38) (57 - 40) (61 - 49) (35 - 28)
Lower
2.76 2.72 - 2.49 2.45 - 2.42 2.39 - 2.15 2.13 - 1.92 1.90 - 1.77 1.58 - 1.49 Switch
J
(70) (69 - 63) (62 - 61) (60 - 54) (54 - 48) (48 - 44) (40 - 37)
Porcelain
3.39 - 2.15 3.47 - 2.22 3.39 - 2.50 2.11 - 1.63 F Actuation
G — — —
(86 - 54) (88 - 56) (86 - 63) (53 - 41) J
2.92 - 2.18 2.93 - 2.18 3.04 - 2.50 1.95 - 1.66
300 H — — —
(74 - 55) (74 - 55) (77 - 63) (49 - 42)
3.14 - 2.83 2.80 - 2.53 2.50 - 2.32 2.13 - 2.01 Model B10
J — — — Displacer
(79 - 71) (71 - 64) (63 - 58) (54 - 51)
Arrangement 3
2.67 - 2.15
G — — — — — —
(67 - 54)
2.68 - 2.34
400 H — — — — — —
(68 - 59)
2.68 - 2.53
J — — — — — —
(68 - 64)
Note: All levels ±0.25" (6).

D Actuation
Displacer Liquid G
Temp.
Type °F Level 1.08 - 1.12 1.13 - 1.17 1.18 - 1.27 1.28 - 1.30 1.31 - 1.39 1.40 - 1.50
1.16 - 0.89 2.04 - 1.75 1.68 - 1.10 1.04 - 0.92 2.05 - 1.56 1.50 - 0.97 Upper
G Switch
(29 - 22) (51 - 44) (42 - 27) (26 - 23) (52 - 39) (38 - 24) Actuation
E
1.22 - 1.06 1.78 - 1.61 1.57 - 1.23 1.19 - 1.12 1.49 - 1.21 1.18 - 0.89 H
100 H
(30 - 26) (45 - 40) (39 - 31) (30 - 28) (37 - 30) (29 - 22)
Lower
0.96 - 0.92 0.92 - 0.88 0.88 - 0.81 0.81 - 0.80 0.79 - 0.74 0.74 - 0.69 Switch
J
(24 - 23) (23 - 22) (22 - 20) (20 - 20) (20 - 18) (18 - 17)
F Actuation
1.68 - 1.38 1.31 - 1.05 1.71 - 1.13 1.75 - 1.62 1.56 - 1.09 1.53 - 1.00
G J
(42 - 35) (33 - 26) (43 - 28) (44 - 41) (39 - 27) (38 - 25)
1.42 - 1.25 1.21 - 1.06 1.31 - 0.99 1.50 - 1.42 1.39 - 1.12 1.33 - 1.03
200 H
(36 - 31) (30 - 26) (33 - 25) (38 - 36) (35 - 28) (33 - 26)
1.48 - 1.42 1.41 - 1.36 1.35 - 1.25 1.24 - 1.23 1.22 - 1.15 1.14 - 1.06 Model B10
J
(37 - 36) (35 - 34) (34 - 31) (31 - 31) (30 - 29) (28 - 26) Displacer Arrangement 4
2.19 - 1.88 1.81 - 1.52 2.19 - 1.57 2.18 - 2.05 1.98 - 1.49 1.93 - 1.37
G
(55 - 47) (45 - 38) (55 - 39) (50 - 37) (50 - 37) (49 - 34)
Actuation
1.93 - 1.75 1.70 - 1.53 1.79 - 1.43 1.93 - 1.85 1.81 - 1.52 1.73 - 1.40 D
Porcelain 300 H
(49 - 44) (43 - 38) (45 - 36) (49 - 46) (45 - 38) (43 - 35) G

1.99 - 1.92 1.90 - 1.84 1.82 - 1.69 1.68 - 1.66 1.64 - 1.55 1.54 - 1.43 Upper
J Switch
(50 - 48) (48 - 46) (45 - 42) (42 - 42) (41 - 39) (39 - 36)
2.71 - 2.38 2.30 - 2.00 2.66 - 2.01 2.62 - 2.48 2.41 - 1.90 2.33 - 1.74
G E Actuation
(68 - 60) (58 - 50) (67 - 51) (61 - 48) (61 - 48) (59 - 44)
H Lower
2.45 - 2.25 2.20 - 2.01 2.26 - 1.87 2.37 - 2.28 2.24 - 1.92 2.13 - 1.77 Switch
400 H
(62 - 57) (55 - 51) (57 - 47) (60 - 57) (56 - 23) (54 - 44)
2.51 - 2.42 2.40 - 2.32 2.30 - 2.13 2.12 - 2.08 2.07 - 1.95 1.94 - 1.81
J (63 - 61) (60 - 58) (58 - 54) (53 - 52) (52 - 49) (49 - 45) F Actuation
3.23 - 2.88 2.80 - 2.48 3.13 - 2.45 3.05 - 2.91 2.84 - 2.30 2.73 - 2.11 J
G
(82 - 73) (71 - 62) (79 - 62) (77 - 73) (72 - 58) (69 - 53)
2.97 - 2.75 2.69 - 2.49 2.73 - 2.31 2.80 - 2.71 2.67 - 2.33 2.53 - 2.15
500 H
(75 - 69) (68 - 63) (69 - 58) (71 - 68) (67 - 59) (64 - 54) Model B10
3.03 - 2.92 2.89 - 2.79 2.77 - 2.57 2.55 - 2.51 2.50 - 2.35 2.33 - 2.18 Displacer Arrangement 5
J
(76 - 74) (73 - 70) (70 - 65) (64 - 63) (63 - 59) (59 - 55)
Note: All levels ±0.25" (6). 13
S P E C I F I C A T I O N S
M O D E L B 1 0 A C T U A T I O N L E V E L S ( c o n t . )

INCHES (MM)
B10 STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY WITH DISPLACER ARRANGEMENTS 3, 4, AND 5
Displacer Liquid
Type Temp. °F Level 0.50 - 0.58 0.59 - 0.71 0.72 - 0.79 0.80 - 0.85 0.86 - 1.00 1.01 - 1.03
3.77 - 1.60 4.10 - 1.38 4.43 - 2.97 4.58 - 3.60 3.42 - 1.26 1.13 - 0.88
G
(95 - 40) (104 - 35) (112 - 75) (24 - 91) (86 - 31) (28 - 22)
3.46 - 2.16 3.72 - 2.08 3.96 - 3.07 3.63 - 3.07 2.96 - 1.71 1.45 - 1.31
100 H
(87 - 54) (94 - 52) (100 - 77) (92 - 77) ((75 - 43) (36 - 33)
2.51 - 2.16 2.13 - 1.77 1.74 - 1.59 1.57 - 1.48 1.46 - 1.25 1.24 - 1.22
J
(63 - 54) (54 - 44) (44 - 40) (39 - 37) (37 - 31) (31 - 30)
4.22 - 1.98 1.74 - 1.44 3.74 - 2.35 2.17 - 1.33 3.89 - 1.66
G —
(107 - 50) (44 - 36) (94 - 59) (55 - 33) (98 - 42)
Stainless
Steel 3.76 - 2.42 2.27 - 1.89 3.02 - 2.22 2.12 - 1.64 3.22 - 1.93
200 H —
and (95 - 61) (57 - 48) (76 - 56) (53 - 41) (81 - 49)
Karbate 3.67 - 3.16 3.11 - 2.58 2.55 - 2.32 2.29 - 2.16 2.13 - 1.84
J —
(93 - 80) (78 - 65) (64 - 58) (58 - 54) (54 - 46)
4.87 - 2.26 4.55 - 3.08 2.89 - 2.02 4.56 - 2.24
G — —
(123 - 57) (115 - 78) (73 - 51) (115 - 56)
4.30 - 2.70 3.83 - 2.96 2.84 - 2.32 3.89 - 2.51
300 H — —
(109 - 68) (97 - 75) (72 - 58) (98 - 63)
4.03 - 3.40 3.36 - 3.06 3.02 - 2.84 2.81 - 2.42
J — —
(102 - 86) (85 - 77) (76 - 72) (71 - 61)
5.35 - 3.82 3.62 - 2.70 5.24 - 2.82
G — — —
(135 - 97) (91 - 68) (133 - 71)
4.63 - 3.69 3.57 - 3.01 4.57 - 3.09
400 H — — —
(117 - 93) (90 - 76) (116 - 78)
4.16 - 3.79 3.75 - 3.53 3.48 - 3.00
J — — —
Stainless (105 - 96) (95 - 89) (88 - 76)
Steel 5.91 - 3.41
G — — — — —
(150 - 86)
5.24 - 3.67
500 H — — — — —
(133 - 93)
4.16 - 3.58
J — — — — —
(105 - 90)
Note: All levels ±0.25" (6).

D Actuation D Actuation D Actuation

G G G

Upper Upper
Switch Switch
Upper
Switch
E Actuation E Actuation E Actuation
H H H Lower
Switch
Lower Lower
Switch Switch

F Actuation F Actuation F Actuation

J J J

Model B10 Model B10 Model B10

Displacer Displacer Displacer
Arrangement 3 Arrangement 4 Arrangement 5

14
S P E C I F I C A T I O N S
MODEL B15 DIMENSIONAL DATA AND ACTUATION LEVELS *
INCHES (MM)

Outline Dimensions Displacer Type C D E

Displacer Threaded Mounting Flanged Mounting Porcelain 2.56 (65) 7.25 (184) 5.02 (127)
Type A B A B
Stainless Steel 2.50 (63) 10.50 (266) 6.00 (152)
5.50 243.00 7.50 245.00 or Karbate
Porcelain (139) (6172) (190) (6223)
Stainless Steel 5.88 243.00 7.88 245.00 Electrical Connections
or Karbate (149) (6172) (200) (6223)
TYPE 4X/7/9, Group B: 1" NPT

B15 STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY

Liquid 0.70 0.80
Displacer Temp.
Type F G H J F G H J
°F

Stainless 100 9.50 (241) 5.00 (127) 4.90 (124) 1.30 (33) 7.60 (193) 3.70 (93) 4.30 (109) 1.10 (27)
Steel or
Karbate 200 — — — — 8.20 (208) 4.30 (109) 5.00 (127) 1.80 (45)

Note: All levels ±0.25" (6). *See page 21 for PROOF-ER and/or floating rooftop switch dimensions.

Liquid 0.95 1.00

Displacer Temp.
Type F G H J F G H J
°F
Porcelain 100 5.50 (139) 2.00 (50) 3.70 (93) 1.00 (25) 5.00 (127) 1.70 (43) 3.50 (88) 0.80 (20)
100 5.50 (139) 2.00 (50) 3.70 (93) 1.00 (25) 4.90 (124) 1.70 (43) 3.40 (86) 0.90 (22)
Stainless 200 6.00 (152) 2.70 (68) 4.20 (106) 1.50 (38) 5.40 (137) 2.20 (55) 4.00 (101) 1.50 (38)
Steel 300 6.40 (162) 3.10 (78) 4.70 (119) 2.00 (50) 5.70 (144) 2.50 (63) 4.40 (111) 1.90 (48)
400 — — — — 6.10 (154) 2.90 (73) 4.90 (124) 2.40 (60)
100 5.50 (139) 2.00 (50) 3.70 (93) 1.00 (25) 4.90 (124) 1.70 (43) 3.40 (86) 0.90 (22)
Karbate 200 6.00 (152) 2.70 (68) 4.20 (106) 1.50 (38) 5.40 (137) 2.20 (55) 4.00 (101) 1.50 (38)
300 6.40 (162) 3.10 (78) 4.70 (119) 2.00 (50) 5.70 (144) 2.50 (63) 4.40 (111) 1.90 (48)
Note: All levels ±0.25" (6). *See page 21 for PROOF-ER and/or floating rooftop switch dimensions.

5.93 5.93
(151) (151)
3.87 3.87
(98) (98)

8.46 8.46
10.12 (214) 10.12
(257) (214)
(257)
Elect. Elect.
Conn. Plug Conn. Plug

3.13
(79) 2 1/2" NPT Flange

A Min. A Min.

Rising Level Rising Level

B Actuation B Actuation
Max. Max. D
D F
F Falling Level
Falling Level
Actuation Actuation
G G

Rising Level Rising Level

E Actuation E Actuation
J J
H H Falling Level
Falling Level
Actuation Actuation

C C

Model B15 Model B15

with Threaded Mounting with Flanged Mounting
15
S P E C I F I C A T I O N S
MODEL C10 DIMENSIONAL DATA

INCHES (MM)
MODEL C10 WITH ALL DISPLACER ARRANGEMENTS
Outline Dimensions
Displacer Threaded Mounting Flanged Mounting 5.93 5.93
(151)
Type A B A B
(151)
3.87 3.87
(98) (98)
6.38 243.00 8.38 245.00
Porcelain (965) (6172) (212) (6223)
Stainless Steel 5.75 243.00 7.75 245.00 13.11 13.11
14.81 (332) 14.81 (332)
or Karbate (146) (6172) (196) (6223) (376) (376)

MODEL C10 WITH DISPLACER Elect. Elect.

Conn. Plug Conn. Plug
ARRANGEMENTS A, B, AND C
3.13 (79) Flange
Displacer Type C D E F G
2 1/2" NPT
2.56 6.42 5.02 5.02 3.62
Porcelain A Min. A Min.
(65) (163) (127) (127) (91)
Stainless Steel 2.50 6.00 6.00 4.50 4.50
or Karbate (63) (152) (152) (114) (114)

B
MODEL C10 WITH DISPLACER B
Max.
Max.
ARRANGEMENTS D AND F
Displacer Type C D E F
2.56 14.44 5.02 3.62
Porcelain
(65) (367) (127) (91)
Stainless Steel 2.50 12.00 4.50 4.50
or Karbate (63) (304) (114) (114)

MODEL C10 WITH DISPLACER

ARRANGEMENTS E AND G
C C

Displacer Type C D E F
Model C10 Model C10
Porcelain 2.56 6.42 5.02 8.65 with Threaded Mounting with Flanged Mounting
(65) (153) (127) (219)
Stainless Steel 2.50 6.00 6.00 9.00
or Karbate (63) (152) (152) (228)

Electrical Connections
TYPE 4X/7/9, Group B: 1" NPT

S P E C I F I C A T I O N S
M O D E L C 1 0 A C T U A T I O N L E V E L S
C10 STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY WITH DISPLACER ARRANGEMENTS A, B, AND C

Actuation Actuation Actuation

D D D
H H H
Upper Upper
Switch Switch

Upper
Actuation Actuation Switch Actuation
E E E
J J J Middle
Middle Switch
Switch
Middle
Actuation Actuation Switch Actuation
F F F
K K K Lower
Lower Lower Switch
Switch Switch

G Actuation G Actuation G Actuation

L L L

Model C10 Model C10 Model C10

Displacer Arrangement A Displacer Arrangement B Displacer Arrangement C
16
S P E C I F I C A T I O N S
M O D E L C 1 0 A C T U A T I O N L E V E L S ( c o n t . )

C10 STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY WITH

DISPLACER ARRANGEMENTS A, B, AND C

Displacer Liquid 0.58 0.60 0.70 0.80

Type Temp.
°F (°C) H J K L H J K L H J K L H J K L

100 2.5 2.2 2.2 2.0 2.3 2.0 1.9 1.7

PLEASE REFER TO — — — — — — — —
(37.8) (64) (56) (56) (51) (58) (51) (48) (43)
Porcelain
PAGE 16 FOR 200
— — — — — — — — — — — — — — — —
DISPLACER (93)
ARRANGEMENTS 100 4.5 3.7 3.2 2.3 3.8 3.2 3.0 2.2 4.2 3.8 2.1 1.9 1.8 2.2 1.3 1.7
A, B, AND C. (37.8) (114) (94) (81) (58) (97) (81) (76) (56) (107) (97) (53) (48) (46) (56) (33) (43)
Stainless
Steel 200 3.2 2.9 2.5 2.3
or — — — — — — — — — — — —
(93) (81) (74) (64) (58)
Karbate
300
— — — — — — — — — — — — — — — —
(149)
Note: All levels ±0.25" (6).

Displacer Liquid 0.90 1.00 1.10 1.20

Type Temp.
°F (°C) H J K L H J K L H J K L H J K L
PLEASE REFER TO 100 3.0 2.4 2.7 1.5 1.4 1.4 2.1 1.4 3.0 2.6 2.5 1.2 1.7 1.7 2.1 1.1
PAGE 16 FOR (37.8) (76) (61) (69) (38) (36) (36) (53) (36) (76) (66) (64) (30) (43) (43) (53) (28)
Porcelain
DISPLACER 200 3.2 2.7 2.8 1.7 1.7 1.7 2.3 1.6
— — — — (157) (53) (58) (40) — — — —
ARRANGEMENTS (93) (78) (71) (43) (132)
A, B, AND C. 100 3.1 3.2 2.5 1.5 1.3 1.9 1.8 1.3 3.1 3.2 2.5 1.3 1.6 2.2 1.9 1.2
(37.8) (79) (81) (64) (38) (33) (48) (45) (33) (79) (81) (64) (33) (41) (56) (48) (30)
Stainless
Steel 200 3.6 3.6 1.7 2.0 1.7 2.3 1.1 1.8
or — — — — — — — —
(93) (91) (91) (43) (51) (43) (58) (27) (46)
Karbate
300 3.4 3.0 2.4 2.7 1.6 1.8 1.7 2.4
Actuation — — — — — — — —
(149) (86) (76) (61) (69) (41) (46) (43) (61)
D Upper
Switch Note: All levels ±0.25" (6).
G Actuation

H C10 STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY WITH

Middle
Switch DISPLACER ARRANGEMENTS D AND F

Actuation Displacer Liquid 0.58 0.60 0.70 0.80

E
Type Temp.
J
°F G H J K G H J K G H J K G H J K
Lower
Switch
7.50 2.60 2.20 2.00 6.90 2.40 1.90 1.70
Actuation Porcelain 100 — — — — — — —
— (190)
F (66) (55) (50) (175) (60) (48) (43)
K
Stainless 9.90 3.70 3.20 2.30 9.20 3.20 3.00 2.20 8.90 3.80 2.10 1.90 6.70 2.20 1.30 1.70
100 (251) (93) (81) (58) (233) (81) (76) (55) (226) (96) (53) (48) (170) (55) (33) (43)
Steel
Model C10 or 7.40 2.90 2.50 2.30
Displacer Karbate 200 — — — — — — — — — — — — (187) (73) (63) (58)
Arrangement D
Note: All levels ±0.25" (6).

Actuation

D Upper Displacer Liquid 0.90 1.00 1.10 1.20

Switch
G Type Temp.
Actuation
°F G H J K G H J K G H J K G H J K
H
6.60 2.80 2.70 1.50 5.20 1.80 2.10 1.40 6.10 3.00 2.50 1.20 5.00 2.10 2.10 1.10
100
Middle
(167) (71) (68) (38) (132) (45) (53) (35) (154) (76) (63) (30) (127) (53) (53) (27)
Switch
Porcelain
6.20 3.10 2.80 1.70 5.20 2.10 2.30 1.60
Actuation 200 — — — — (157) — — — —
E (78) (71) (43) (132) (53) (58) (40)
J
7.20 3.20 2.50 1.50 5.50 1.90 1.80 1.30 6.40 3.20 2.50 1.30 5.20 2.20 1.90 1.20
Lower 100
Switch (182) (81) (63) (38) (139) (48) (45) (33) (162) (81) (63) (33) (132) (55) (48) (30)
Stainless
F Actuation Steel 7.60 3.60 1.70 2.00 5.90 2.30 1.10 1.80
200 (193) (91) (43) (50) (149) (58) (27) (45) —
K or — — — — — — —
Karbate
7.00 3.00 2.40 2.70 5.40 1.80 1.70 2.40
300 (177) (76) (60) (68) (137) (45) (43) (60) — — — — — — — —
Model C10
Displacer
Note: All levels ±0.25" (6).
Arrangement F
17
S P E C I F I C A T I O N S
M O D E L C 1 0 A C T U A T I O N L E V E L S ( c o n t . )
INCHES (MM)

Actuation
D C10 STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY WITH
G
Upper
DISPLACER ARRANGEMENTS E AND G
Switch
Displacer Liquid 0.58 0.60 0.70 0.80
Type Temp.
E
Actuation
°F G H J K G H J K G H J K G H J K
H
Middle
2.50 2.20 5.80 1.90 2.30 2.00 5.50 2.10
Switch Porcelain 100 — — — — — — — —
(63) (55) (147) (48) (58) (50) (139) (53)
Actuation
F Stainless 4.50 3.70 7.70 2.80 3.80 3.20 7.50 2.70 4.20 3.80 6.60 2.50 1.80 2.20 5.80 2.20
100
Lower
Steel (114) (93) (195) (71) (96) (81) (190) (68) (106) (96) (167) (63) (45) (55) (147) (55)
J Switch
or
Actuation 3.20 2.90 7.00 3.40
Karbate 200 — — — — — — — — — — — —
K (81) (73) (177) (86)
Note: All levels ±0.25" (6).
Model C10
Displacer Arrangement E
Displacer Liquid 0.90 1.00 1.10 1.20
Type Temp.
Actuation
°F G H J K G H J K G H J K G H J K
D
G
Upper 3.00 2.40 6.30 3.20 1.40 1.40 5.70 1.90 3.00 2.60 6.10 3.60 1.70 1.70 5.70 3.40
100
Switch (76) (60) (160) (81) (35) (35) (144) (48) (76) (66) (154) (91) (43) (43) (144) (86)
Porcelain
3.20 2.70 6.40 3.60 1.70 1.70 5.90 3.40
Actuation 200 — — — — (81) — — — —
E (68) (162) (91) (43) (43) (149) (86)
H Middle
Switch 3.10 3.20 7.00 3.80 1.30 1.90 6.30 3.40 3.10 3.20 7.00 4.40 1.60 2.20 6.40 4.00
100
Stainless (78) (81) (177) (96) (33) (48) (160) (86) (78) (81) (177) (111) (40) (55) (162) (101)
Actuation Steel 3.60 3.60 6.20 3.00 1.70 2.30 5.60 2.70
200 (91) (91) (157) (76) (43) (58) (142) (68) —
F or — — — — — — —
Lower
J Switch Karbate
Actuation
3.40 3.00 6.90 3.70 1.60 1.80 6.20 3.30
300 (86) (76) (175) (93) (40) (45) (157) (83) — — — — — — — —
K

Note: All levels ±0.25" (6).

Model C10
Displacer Arrangement G

S P E C I F I C A T I O N S
MODEL C15 ACTUATION LEVELS
INCHES (MM)
C15 STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY
Liquid 0.65 0.70 0.80
Displacer Temp.
Type G H J K L M G H J K L M G H J K L M
°F
6.20 1.40 5.30 1.00 3.80 0.90
Porcelain 0 to +130 — — — — — — — — — — — — (157) (35) (134) (25) (96) (22)
Stainless 7.70 2.20 6.10 2.00 4.90 1.40 6.70 1.60 5.50 1.60 4.60 1.30 6.50 2.00 5.20 1.60 4.30 1.10
Steel 0 to +130
(195) (55) (154) (50) (124) (35) (170) (40) (139) (40) (116) (33) (165) (50) (132) (40) (109) (27)
or Karbate
Note: All levels ±0.25" (6).

Liquid 0.90 1.00 1.10

Displacer Temp.
Type G H J K L M G H J K L M G H J K L M
°F
6.20 1.90 5.00 1.40 3.60 1.00 4.60 0.70 4.00 0.80 3.30 0.90 4.20 1.10 3.80 1.00 3.10 0.90
Porcelain 0 to +130 (157) (48) (127) (35) (91) (25) (116) (17) (101) (20) (83) (22) (106) (27) (96) (25) (78) (22)
Stainless
6.60 2.60 5.20 1.80 4.00 1.20 4.60 1.00 4.00 1.00 3.60 1.10
Steel 0 to +130 — — — — — —
or Karbate (167) (66) (132) (45) (101) (30) (116) (25) (101) (25) (91) (27)
Note: All levels ±0.25" (6).

Liquid 1.20 1.25

Displacer Temp.
Type G H J K L M G H J K L M
°F
4.50 1.60 3.70 1.10 2.90 0.90 3.90 1.10 3.30 0.90 2.80 0.80
Porcelain 0 to +130 (114) (40) (93) (27) (73) (22) (99) (27) (83) (22) (71) (20)
Note: All levels ±0.25" (6).
18
S P E C I F I C A T I O N S
MODEL C15 DIMENSIONAL DATA AND ACTUATION LEVELS

INCHES (MM)

OUTLINE DIMENSIONS Displacer Type C D E F

Displacer Threaded Mounting Flanged Mounting 2.56 7.25 6.42 5.02
Porcelain
Type A B A B (65) (184) (163) (127)
7.75 245.00 9.75 247.00 Stainless Steel 2.50 9.00 7.50 6.00
Porcelain or Karbate (63) (228) (190) (152)
(196) (6223) (247) (6273)
Stainless Steel 7.25 244.00 9.25 246.00
or Karbate (184) (6197) (234) (6248)
Electrical Connections
TYPE 4X/7/9, Group B: 1" NPT

5.93 5.93
(151) (151)
3.87 3.87
(98) (98)

13.11 13.11
14.81 (332) 14.81 (332)
(376) (376)

Elect. Elect.
Conn. Plug Conn. Plug

3.13 (79) Flange

2 1/2" NPT

A Min. A Min.

Rising Level Rising Level

Actuation Actuation
D D
G G
H H
B Falling Level Falling Level
B
Actuation Actuation
Max. Max.

Rising Level Rising Level

E Actuation E Actuation
J J
Falling Level Falling Level
K Actuation Actuation
K

Rising Level Rising Level

Actuation Actuation
F F
L Falling Level L Falling Level
M M
Actuation Actuation

C C

Model C15 Model C15

with Threaded Mounting with Flanged Mounting

19
M O D E L N U M B E R
S E R I E S A 1 5 A N D B 1 5 F O R F L O A T I N G R O O F D E T E C T I O N
PART NUMBER CODE
Part Number Code Function
A15 Narrow differential, Single Stage
B15 Narrow differential, Dual Stage

MATERIALS OF CONSTRUCTION
E-Tube Displacer Clamps/ Magnetic Process
Code Support Spring Trim
Mtg. Nut Susp. Cable Sleeve Connection
1 Inconel 600 300 Series SS Carbon Steel 316 SS 400 Series SS Carbon Steel
2 Inconel 600 316 SS 316 SS 316 SS 316 SS Carbon Steel

TANK CONNECTION
Tank Connection Code Connection Type
E2 21⁄2" NPT Threaded
G2 ¿¡ 3" 150 lb. Flat Face Flange
G3 ¡ 3" 150 lb. Raised Face Flange
H2 ¿ 4" 150 lb. Flat Face Flange
H3 4" 150 lb. Raised Face Flange
K2 ¿ 6" 150 lb. Flat Face Flange
K3 6" 150 lb. Raised Face Flange

DISPLACER MATERIAL AND PROOF-ER OPTION

Displacer Type and Material Code
Liquid &
Floating Roof Only
Floating Roof
Brass Hollow Brass ¬ PROOF-ER Type
P R Without PROOF-ER
Q T Low Pressure PROOF-ER

MODEL SELECTION CHART

Model A15 Codes Model B15 Codes
C Single Set Point Dual Set Points
O
Process N TYPE 4X/7/9 Aluminum Enclosure
Temp. T
Switch Description ATEX
Range A Cl. I, ATEX Cl. I,
°F (°C) C Cl. I, Cl. I, Ex II 2 G
Div 1 Ex II 2 G Div 1
T Div 1 Div 1 EEx d
Groups EEx d IIC Groups
S Group B Group B IIC
C&D T6 C&D
T6
–40 to +250 SPDT BKQ BKS BA9 BLB BLK BD9
Series B Snap Switch
(–40 to +121) DPDT BNQ BNS BB9 BOB BOK BG9
–40 to +450 SPDT CKQ CKS CA9 CLB CLK CD9
Series C Snap Switch
(–40 to +232) DPDT CNQ CNS CB9 COB COK CG9
Series D DC Current –40 to +250 SPDT DKQ DKS DA9 DLB DLK DD9
Snap Switch (–40 to +121) DPDT DNQ DNS DB9 DOB DOK DG9
Series F Herm. Sealed –50 to +500 SPDT FKQ FKS FA9 FLB FLK FD9
Snap Switch (–46 to +260) DPDT FNQ FNS FB9 FOB FOK FG9
Series HS Herm. Sealed SPDT HMC HEK
–50 to +500
5 Amp Snap Switch N/A
(–46 to +260) DPDT HMF HET
with Wiring Leads
N/A
Series HS Herm. Sealed SPDT HM3 HM4 HA9
–50 to +500
5 Amp Snap Switch
(–46 to +260) DPDT HM7 HM8 HB9
with Terminal Block
Series 8 Herm. Sealed –50 to +500 SPDT 8KQ 8KS 8A9 8LB 8LK 8D9
Snap Switch (–46 to +260) DPDT 8NQ 8NS 8B9 8OB N/A 8G9

¿ ASME B16.5 150# FF flanges are compatible

with ASME B16.1 125# flanges.
¡ 3-inch process flanges available only with 7th
digit R or T and with maximum nozzle schedule
of 3" Sch 40.
¬ Available on model A15 only. Suitable for
process liquids with SG greater than or equal
20 to 0.40.
S P E C I F I C A T I O N S
PROOF-ER AND FLOATING ROOFTOP DIMENSIONAL DATA

INCHES (MM)
5.93
14.62 (371) (151)
Minimum HOLLOW BRASS DISPLACER
clearance 4.29 (109)
required F
for actuation

1" NPT
30' (9 m)
G
SS
Cable
standard
B

Optional flange
21⁄2" NPT

10' (3 m) A
Cable standard

B
D

E
F
TYPICAL PROOF-ER INSTALLATION C
VERSA FLANGE ASSEMBLY
WITH VERSA FLANGE PART NUMBER
D
089-5207-001
MAX ANGLE = 15°

VERSA FLANGE BOLT CIRCLE

DIMENSIONAL CHART
A B C D E min F G
Threaded 5.62 (143) 15.93 (405)
n/a
Flanged 7.62 (194) 17.62 (448)

A15 SS Chunk 2.16 (55) 2.50 (64) 0.82 (21)

Brass Chunk n/a 2.00 (51) n/a 2.50 (64) n/a 0.82 (21) n/a

Hollow Brass 9.00 (229) 2.50 (64) 0.92 (23)

Threaded 5.88 (149) 18.12 (460)
n/a
Flanged 7.88 (200) 19.81 (503)

B15 SS Chunk 2.16 (55) 1.08 (27) 2.50 (64) 0.82 (21)
4.00 (102)
Brass Chunk n/a 1.50 (38) 1.00 (25) 2.50 (64) 0.82 (21) n/a

Hollow Brass n/a

21
M O D E L N U M B E R
S E R I E S A 1 0 A N D A 1 5 S I N G L E S W I T C H M O D E L S

Models available for quick shipment, usually within one week after factory
receipt of a complete purchase order, through the Expedite Ship Plan (ESP)
PART NUMBER CODE AND SPECIFIC GRAVITY LIMITS *
Liquid
Part Number Function Displacer Type
Temp.
Code
°F °C Porcelain Stainless Steel Karbate
100 38 0.60 to 1.20 0.60 to 1.20 0.60 to 1.20
200 93 0.70 to 1.20 0.70 to 1.20 0.70 to 1.20
A10 Wide Differential, Single Stage 300 149 0.80 to 1.20 0.80 to 1.20 0.80 to 1.20
400 204 1.00 to 1.20 0.90 to 1.20 —
500 260 1.10 to 1.20 1.00 to 1.20 —
100 38 0.60 to 2.40 0.40 to 1.65 0.40 to 1.65
200 93 0.62 to 2.40 0.40 to 1.65 0.45 to 1.65
A15 Narrow Differential, Single Stage 300 149 0.65 to 2.40 0.50 to 1.65 0.50 to 1.65
400 204 0.70 to 2.40 0.55 to 1.65 —
500 260 0.75 to 2.40 0.60 to 1.65 —

MATERIALS OF CONSTRUCTION
Support E-Tube Displacer Clamps/ Magnetic Process
Code Trim
Spring Mtg. Nut Susp. Cable Sleeve Connection
1 Inconel 600 300 Series SS Carbon Steel 316 SS 400 Series SS Carbon Steel
2 Carbon Steel
Inconel 600 316 SS 316 SS 316 SS 316 SS
4 316 SS
5 Monel
Inconel 600 300 Series SS Carbon Steel 400 Series SS Carbon Steel
6 Hastelloy
M¿ Inconel X750 316 SS 316 SS 316 SS 316 SS 316 SS
NACE Const.
N¿ Inconel X750 300 Series SS 316 SS 316 SS 316 SS Carbon Steel
NACE Const.

TANK CONNECTION
Tank Connection Code
21⁄2" NPT Threaded ¡ E2
3" 150 lb. Flat Face Flange ¬√ 12 G2
3" 150 lb. Raised Face Flange ƒ G3
4" 150 lb. Flat Face Flange ¬√ 12 H2
4" 150 lb. Raised Face Flange ƒ H3
4" 300 lb. Raised Face Flange ƒ H4
6" 150 lb. Flat Face Flange ¬√ 12 K2
6" 150 lb. Raised Face Flange ƒ K3
6" 300 lb. Raised Face Flange ƒ K4

DISPLACER MATERIAL AND PROOF-ER OPTION

Liquid & Floating
Proof-er** Displacer Material Floating Roof Weight 14
Roof Displacer
Type
Porcelain 316 SS Karbate Brass Hollow Brass 13

P¬ R¬
Without
A B C
Proof-er
D¬ E¬ F¬ Q¬ T¬
Low
Pressure ¡
G¬ H¬ J¬
Medium
Pressure ¡
— —

* Specific gravity limits do not apply to floating roof top units

not to be used in liquid.
** Proof-er option constructed of carbon steel material.

22
M O D E L N U M B E R
S E R I E S A 1 0 A N D A 1 5 S I N G L E S W I T C H M O D E L S ( c o n t . )

ELECTRIC SWITCH MECHANISM AND ENCLOSURE ≈

A10 Codes A15 Codes
Max.➆
Switch Description Aluminum Polymer Coated NEMA 4X/7/9 ➇
Process
Temp. One Class I, Div. 1, Class I, Div. 1, Class I, Div. 1, Class I, Div. 1,
°F (°C) Set Point ATEX ATEX
Groups C & D Group B Groups C & D Group B
250 SPDT BKB BKK BC9 BKQ BKS BA9
Series B Snap Switch
(121) DPDT BNB BNK BF9 BNQ BNS BB9
450 SPDT CKB CKK CC9 CKQ CKS CA9
Series C Snap Switch
(232) DPDT CNB CNK CF9 CNQ CNS CB9
Series D Snap Switch For 250 SPDT DKB DKK DC9 DKQ DKS DA9
DC Current Applications (121) DPDT DNB DNK DF9 DNQ DNS DB9
Series F SPDT FKB FKK FC9 FKQ FKS FA9
500
Hermetically Sealed
(260) DPDT FNB FNK FF9 FNQ FNS FB9
Snap Switch

500 ➈
Series HS SPDT HMJ HMK — HMC HEK 10 —
Hermetically Sealed Snap
(260)
Switch w/Wiring Leads DPDT HMS HMT — HMF HET 10 —

500 ➈
Series HS SPDT HM3 HM4 HA9 HM3 11 HM4 11 HA9
Hermetically Sealed Snap
(260) DPDT HM7 HM8 HB9 HM7 11 HM8 11 HB9
Switch w/Terminal Block
Series 8 SPDT 8KB 8KK 8C9 8KQ 8KS 8A9
500
Hermetically Sealed
(260)
Snap Switch DPDT 8NB 8NK 8F9 8NQ 8NS 8B9

PNEUMATIC SWITCH MECHANISM AND ENCLOSURE

Maximum Maximum Bleed
Switch Supply Process Orifice A10 Codes A15 Codes
Description Pressure Temperature ➆ Diameter
psig bar °F °C Inches mm NEMA 1 NEMA 1
Series J Bleed Type 100 7 400 204 .063 1.6 JGF JDE
Pneumatic Switch 60 4 400 204 .094 2.3 JHF JEE
Series K Non-Bleed
Pneumatic Switch 100 7 400 204 — — KOF KOE

¿ Not available with displacer material and proof-er ➈ On steam applications, temperature down rated to
option codes D, E, F, G, H, J, P, Q, R or T. +400 °F (+204 °C) process at +100 °F (+38 °C)
¡ Pressure/temperature ratings on page 4. Flanges are ambient. Available with a 6" tall cover only.
ASME type. ➉ CSA approval does not apply to these switch
¬ Not available with material of construction codes designations.
M and N. 11 Available with a 6" tall cover only.
√ Not available with material of construction code 4. 12 ASME B16.5 150# FF flanges are compatible with
ƒ 316 SS flange is provided with material of construc- ASME B16.1 125# flanges.
tion code 4 and M. 13 Use on model A15 only. Minimum SG = 0.40@ +100 °F
≈ Consult factory for NEMA 4X/7/9 cast iron (+38 °C).
housings. 14 Model A15 only.
➆ Process temperature based on +100 °F (+38 °C)
ambient.
➇ Uncontrolled housing heater or drain available in
NEMA 4X/7/9 enclosures. Consult factory for
standard part numbers.

A 1
23
M O D E L N U M B E R
S E R I E S B 1 0 A N D B 1 5 D U A L S W I T C H M O D E L S
Models available for quick shipment, usually within one week after factory
receipt of a complete purchase order, through the Expedite Ship Plan (ESP)
Note: Each B10 instrument is factory calibrated to
operate on a given specific gravity within the
PART NUMBER CODE AND SPECIFIC GRAVITY LIMITS * minimum and maximum values listed.
Liquid
Part Number Displacer Type
Function Temp.
Code
°F °C Porcelain Stainless Steel Karbate
100 38 0.60 to 1.20 0.50 to 1.00 0.50 to 1.00
200 93 0.64 to 1.50 0.50 to 1.00 0.50 to 1.00
B10✝ Wide Differential, Dual Stage 300 149 0.80 to 1.50 0.60 to 1.00 0.60 to 1.00
400 204 1.00 to 1.50 0.72 to 1.00 —
500 260 1.10 to 1.50 0.84 to 1.00 —
100 38 0.95 to 1.20 0.70 to 1.20 0.70 to 1.20
200 93 1.10 to 1.20 0.80 to 1.20 0.80 to 1.20
B15 Narrow Differential, Dual Stage 300 149 — 0.90 to 1.20 0.90 to 1.20
400 204 — 1.00 to 1.20 —
500 260 — 1.04 to 1.20 —
✝ When ordering B10 units, an operating sequence and operating specific gravity must be provided.

MATERIALS OF CONSTRUCTION
Support E-Tube Displacer Clamps/ Magnetic Process
Code Trim
Spring Mtg. Nut Susp. Cable Sleeve Connection
1 Inconel 600 300 Series SS Carbon Steel 316 SS 400 Series SS Carbon Steel
2 Carbon Steel
Inconel 600 316 SS 316 SS 316 SS 316 SS
4 316 SS
5 Monel
Inconel 600 300 Series SS Carbon Steel 400 Series SS Carbon Steel
6 Hastelloy
M¿ Inconel X750 316 SS 316 SS 316 SS 316 SS 316 SS
NACE Const.
N¿ Inconel X750 300 Series SS 316 SS 316 SS 316 SS Carbon Steel
NACE Const.

TANK CONSTRUCTION
Tank Connection Code
21⁄2" NPT Threaded ¡ E2
3" 150 lb. Flat Face Flange ¬√➉ G2
3" 150 lb. Raised Face Flange ƒ G3
4" 150 lb. Flat Face Flange ¬ƒ➉ H2
4" 150 lb. Raised Face Flange ƒ H3
4" 300 lb. Raised Face Flange ƒ H4
6" 150 lb. Flat Face Flange ¬√➉ K2
6" 150 lb. Raised Face Flange ƒ K3
6" 300 lb. Raised Face Flange ƒ K4

DISPLACER MATERIAL AND PROOF-ER OPTION

Floating Roof
Proof-er** Displacer Material Weight Mat’l
Type Model B15 Only
Porcelain 316 SS Karbate Brass

P¬
Without A B C
Proof-er

D¬ E¬ F¬ Q¬
Low
Pressure ¡

* Specific gravity limits do not apply to floating roof top units

not to be used in liquid.
** Proof-er option constructed of carbon steel material.

24
 PLUS ALARM CONTROL OF TWO PUMPS OF DIFFERENT CAPACITY
ARRANGEMENT NO. 1 – FILL WITH ARRANGEMENT NO. 3 – TWO SWITCH, WIDE
Top Switch HIGH LEVEL ALARM DIFFERENTIAL OR DRAIN
Narrow,
Diff. Fixed
The bottom switch starts the drain Top Switch
Wide, Diff. The top switch cycles with level
cycle when the level reaches the Adjustable
Bottom Switch between the top and middle dis-
upper displacer. The drain cycle stops
Wide, Diff. placer. The bottom switch cycles
Adjustable when the level falls to the bottom dis- Bottom Switch with level between the middle and
placer. If level rises above the “drain Wide, Diff.
Adjustable bottom displacer.
start” level, the top switch will acti-
vate an alarm.
CONTROL OF TWO PUMPS – DRAIN
ARRANGEMENT NO. 4
PLUS ALARM
ARRANGEMENT NO. 2 – DRAIN Top Switch In this sequence No. 1 pump starts
Wide, Diff.
WITH LOW LEVEL ALARM Adjustable as the level rises to the middle dis-
Top Switch
Wide, Diff. The top switch starts the fill cycle placer. Should the level continue to
Adjustable
when level drops to the lower dis- rise to the upper displacer, No. 2
Bottom Switch
placer. The fill cycle stops when level Wide, Diff. pump is actuated. Both pumps
Bottom Switch Adjustable operate until the level is dropped to
Narrow, rises to the top displacer. If level falls
Diff. Fixed below the “fill start,” the bottom the lower displacer.
switch will activate an alarm.
CONTROL OF TWO PUMPS – FILL
Top Switch ARRANGEMENT NO. 5
Wide, Diff.
Adjustable The pumping sequence of
Arrangement No. 4 can be
Bottom Switch reversed for a pump “fill”
Wide, Diff.
Adjustable application.
ELECTRIC SWITCH MECHANISM AND ENCLOSURE ➆
Switch Enclosure
NEMA 4X/7/9 ➈
Switch Description ➆
Max. ➇ Class I, Div. 1, Class I, Div. 1,
ATEX
Process Temp. Two Ex II 2G
Groups C & D Group B
°F (°C) Set Points EEx d IIC T6
250 SPDT BLB BLK BD9
Series B Snap Switch
(121) DPDT BOB BOK BG9
450 SPDT CLB CLK CD9
Series C Snap Switch
(232) DPDT COB COK CG9
Series D Snap Switch 250 SPDT DLB DLK DD9
For DC Current Applications (121) DPDT DOB DOK DG9
Series F Hermetically Sealed 500 SPDT FLB FLK FD9
Snap Switch (260) DPDT FOB FOK FG9
Series 8 Hermetically Sealed 500 SPDT 8LB 8LK 8D9
Snap Switch (260) DPDT 8OB N/A 8G9

¿ Not available with displacer material ➆ Pneumatic switch mechanisms and enclosures are unavailable
and proof-er option codes D, E, F, P and Q. for Models B10 and B15 switches.
¡ Pressure/temperature ratings on page 4. ➇ Process temperature based on +100 °F (+38 °C) ambient.
Flanges are ASME type. ➈ Uncontrolled housing heater or drain available in NEMA
¬ Not available with material of construction codes M and N. 4X/7/9 enclosures. Consult factory for standard part numbers.
√ Not available with material of construction code 4. ➉ ASME B16.5 150# FF flanges are compatible with ASME
ƒ 316 SS flange is provided with material B16.1 125# flanges.
of construction code 4 and M.
≈ Consult factory for NEMA 4X/7/9 cast iron housings.

25
M O D E L N U M B E R
S E R I E S C 1 0 A N D C 1 5 T R I - S W I T C H M O D E L S
Note: Each C10 and C15 instrument is factory cali-
brated to operate for a given specific gravity
PART NUMBER CODE AND SPECIFIC GRAVITY LIMITS within the minimum and maximum values listed.
Liquid
Part Number Displacer Type
Function Temp.
Code
°F °C Porcelain Stainless Steel Karbate
100 38 0.65 to 1.20 0.58 to 1.20 0.58 to 1.20
C10✝ Wide Differential, 3 switches 200 93 0.95 to 1.10 0.76 to 1.00 0.76 to 1.00
300 149 — 0.820 to 1.00 0.82 to 1.00
C15✝✝ Narrow Differential, 3 switches 130 54 0.80 to 1.25 0.65 to 1.00 0.65 to 1.00
✝✝ When ordering C10 units, an operating sequence and operating specific gravity must be provided.
✝✝ When ordering C15 units, an operating specific gravity must be provided.

MATERIALS OF CONSTRUCTION
Support E-Tube Displacer Clamps/ Magnetic Process
Code Trim
Spring Mtg. Nut Susp. Cable Sleeve Connection
1 Inconel 600 300 Series SS Carbon Steel 316 SS 400 Series SS Carbon Steel
2 Carbon Steel
Inconel 600 316 SS 316 SS 316 SS 316 SS
4 316 SS
5 Monel
Inconel 600 300 Series SS Carbon Steel 400 Series SS Carbon Steel
6 Hastelloy
M Inconel X750 316 SS 316 SS 316 SS 316 SS 316 SS
NACE Const.
N Inconel X750 300 Series SS 316 SS 316 SS 316 SS Carbon Steel
NACE Const.

TANK CONNECTION AND DISPLACERS

Tank Connection ¿
Displacer Material
Porcelain 316 SS Karbate
21⁄2" NPT Threaded E2A E2B E2C
3" 150 lb. Flat Face Flange ¡≈ G2A G2B G2C
3" 150 lb. Raised Face Flange ¬ G3A G3B G3C
4" 150 lb. Flat Face Flange ¡≈ H2A H2B H2C
4" 150 lb. Raised Face Flange ¬ H3A H3B H3C
4" 300 lb. Raised Face Flange H4A H4B H4C
6" 150 lb. Flat Face Flange ¡≈ K2A K2B K2C
6" 150 lb. Raised Face Flange ¬ K3A K3B K3C
6" 300 lb. Raised Face Flange ¬ K4A K4B K4C

ELECTRIC SWITCH MECHANISM AND ENCLOSURE √

Switch Enclosure
Process ƒ TYPE 4X/7/9 Aluminum Enclosure ➆
Switch Description
Temp. Range Three Class I, Div. 1, Class I, Div. 1,
°F (°C) Set Points Groups C & D Group B
Series O –40 to +300 SPDT OMB OMN
Snap Switch (–40 to +149) DPDT OKB OKN
Series Q –40 to +250 SPDT QMB QMN
Snap Switch (–40 to +121) DPDT QKB QKN

¿ Pressure/temperature ratings on page 4. Flanges are

ASME type.
¡ Not available with material of construction codes M, N
and 4.
¬ 316 SS flange is provided with material of construction
code 4 and M.
√ Pneumatic switch mechanisms and enclosures are
unavailable for Series C10 and C15 switches.
ƒ Process temperature based on +100 °F (+38 °C) ambient.
≈ ASME B16.5 150# FF flanges are compatible with ASME
B16.1 125# flanges.
➆ Consult factory for TYPE 4X/7/9 cast iron housings.

26
S P E C I F I C A T I O N S
M O D E L C 1 0 D I S P L A C E R A R R A N G E M E N T S

INCHES (MM)

Actuation Actuation
D D
H H
Upper
Switch

Upper
Actuation Actuation Switch
E E
J J
Middle
Switch
Middle
Actuation Actuation Switch
F F
K K
Lower Lower
Switch Switch

G Actuation G Actuation
L L

Model C10 Model C10

Displacer Arrangement A Displacer Arrangement B

Actuation Actuation Actuation

D D D
H Upper G
Switch Upper
Upper
G Actuation Switch
Switch

H Actuation
Actuation E
E Middle
J Middle Switch H
Switch Middle
Switch
Actuation
E
Actuation Actuation
F J
F
K Lower Lower
Lower Switch
Switch J Switch
Actuation
F Actuation
K K
G Actuation
L

Model C10 Model C10 Model C10

Displacer Arrangement C Displacer Arrangement D Displacer Arrangement E

Actuation Actuation
D
D Upper G
Switch Upper
G Actuation Switch

H Actuation
E
H Middle
Middle Switch
Switch
Actuation
E
Actuation
J
F
Lower Lower
Switch Switch
J
Actuation
F Actuation
K
K

Model C10 Model C10

Displacer Arrangement F Displacer Arrangement G

27
Q U A L I T Y
The quality assurance system in place at The MAGNETROL quality assurance system
MAGNETROL guarantees the highest level of is registered to ISO 9001 affirming its com-
quality throughout the company. MAGNETROL mitment to known international quality stan-
is committed to providing full customer satisfac- dards providing the strongest assurance of
tion both in quality products and quality service. product/service quality available.

E S P
Several Displacer Type Liquid Level Switches To take advantage of ESP, simply match the
Expedite are available for quick shipment, usually with- color coded model number codes (standard

Ship
in one week after factory receipt of a purchase dimensions apply).
order, through the Expedite Ship Plan (ESP). ESP service may not apply to orders of ten
Plan Models covered by ESP service are conveniently
color coded in the selection data charts.
units or more. Contact your local representa-
tive for lead times on larger volume orders, as
well as other products and options.

W A R R A N T Y
All MAGNETROL mechanical level and flow repair or replace the control at no cost to the
controls are warranted free of defects in materi- purchaser (or owner) other than transportation.
als or workmanship for five full years from the MAGNETROL shall not be liable for misapplica-
date of original factory shipment. tion, labor claims, direct or consequential dam-
If returned within the warranty period; and, age or expense arising from the installation or
upon factory inspection of the control, the use of equipment. There are no other warranties
cause of the claim is determined to be covered expressed or implied, except special written war-
under the warranty; then, MAGNETROL will ranties covering some MAGNETROL products.

For additional information, see Instruction Manual, 45-610.

705 Enterprise Street • Aurora, Illinois 60504-8149 USA

630.969.4000 • [email protected] • magnetrol.com BULLETIN: 45-115.30
EFFECTIVE: September 2019
Copyright © 2021 AMETEK Magnetrol USA, LLC
Performance specifications are effective with date of issue and are subject to change without notice.
SUPERSEDES: February 2018