Alcatel-Lucent OmniPCX Communication Server

IP Desktop Soft Phone Installation Guide

Enterprise

Alcatel-Lucent Services for Enterprise All Rights Reserved Alcatel-Lucent 2007

Legal notice Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of AlcatelLucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright 2007 Alcatel-Lucent. All rights reserved.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 2

Table of Content 1
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11

INTRODUCTION...................................................................................5
The Product ............................................................................................................................................5 Soft-phone - more features than Hard-phone ................................................................................5 Purpose of this guide............................................................................................................................5 Scope ........................................................................................................................................................6 Intended Readership.............................................................................................................................6 Applicability Statement........................................................................................................................6 Overview of this manual......................................................................................................................6 How to use this document...................................................................................................................6 Related Documents ...............................................................................................................................7 Licensing..............................................................................................................................................7 Customer Support..............................................................................................................................7

PREPARING FOR INSTALLATION ..............................................................8

2.1 Requirements for installing.................................................................................................................8 2.1.1 Hardware..........................................................................................................................................8 2.1.2 USB Headset ...................................................................................................................................8 2.1.3 Software ...........................................................................................................................................9 2.1.4 Networking .......................................................................................................................................9 2.2 2.3 2.4 Installation Modes: ..............................................................................................................................10 If Previous Version Exists in System ...............................................................................................11 Installation Options .............................................................................................................................12

3 4 5 6
6.1

INSTALLATION USING: IPDESKTOPSOFTPHONEINST_V3.0.0.6.EXE.................. 13 INSTALLATION USING: IPDESKTOPSOFTPHONE_3_0_0_6.MSI ........................ 33 LAUNCHING THE APPLICATION .......................................................... 47 CUSTOMIZING:.................................................................................. 51
Applications ..........................................................................................................................................51 Page 3

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

6.2 6.3 6.4

Audio Wizard ........................................................................................................................................61 Volume Level ........................................................................................................................................68 UDP used ports .....................................................................................................................................69

UNINSTALLING ................................................................................. 70

7.1 Pre-uninstall Procedure ....................................................................................................................70 7.1.1 Close the application ....................................................................................................................70 7.1.2 Uninstall File ..................................................................................................................................70 7.2 7.3 Uninstalling Using: Windows ..........................................................................................................71 Uninstalling Using: .msi File from command prompt..................................................................75

8 9
9.1 9.2 9.3

TROUBLE SHOOTING .......................................................................... 78 APPENDIXES .................................................................................... 80

Common Features ...............................................................................................................................80 IP desktop Softphone in different environments.........................................................................81 Table of Figures ...................................................................................................................................84

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 4

1 Introduction
1.1 The Product
Congratulations on your opting for: IP Desktop Soft Phone (IPDSP). You have indeed made a wise choice. Now you can enjoy the benefits of more than a sophisticated hard-phone, at the ease of mouse clicks. This is an application that displays an image of a hard-phone in your systems screen. You can activate its various keys and buttons using mouse clicks. This softphone accommodates customizations to suit the preferences of users. If you have installed this in a laptop, you can use the soft-phone when you connect your laptop to your LAN. Installation of this application is easy, quick and user friendly. This application is also known as IP Desktop Soft Phone Agent, when used in the Call centre Environment. This IPDSP operates in a LAN. You can create Virtual LANs (VLAN) within the physical LAN and use them for separate groups within the LAN. You can also encrypt communications among the terminals. You can find the details of these in: IPDSP Encryption.doc IPDSP VLAN.doc

1.2 Soft-phone - more features than Hard-phone

Unlike hard-phones, to add a new terminal, you need not buy a new one and configure it. Instead, you can install the application in a system existing in that PABX network. It does not occupy more space, and saves on connectivity and other hardware problems. Besides these advantages, this soft-phone provides more features than a hard-phone. This is best suited for the Home working or the remote working with 100% feature transparency of the IP Hard phone. The Limitation of distance is no more a problem. As long as you can connect to your network using Internet/VPN, you are never out of reach. With the Wireless Network card and the Bluetooth, you can be always connected to the system and this helps you in getting all your calls when you are on the move.

1.3 Purpose of this guide

This guide explains:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 5

1. The hardware and software environment that the installation of this application requires. 2. The method of installing the application. 3. Basic configuration. This manual targets at the System Administrator, and provides him with all necessary information to complete the above tasks.

1.4 Scope
This manual covers all activities necessary for installing the application in a PC and provides guidelines to configure it. It also covers all necessary information to create the environment suitable for the installation. This document does not cover the usage details of this application. Please refer the IP Desktop Soft Phone User Guide for the same.

1.5 Intended Readership

This manual targets System Administrator who also does networking. This is not relevant to the user of this application

1.6 Applicability Statement

This manual applies to installation of the application: IP Desktop Soft Phone version 3.0.0.6 only.

1.7 Overview of this manual

This manual is split into different sections. The first section acts as a starter, providing preliminary and superficial information. Chapter 2 provides the mainstream information. The third chapter deals with customizing the installed application. Other sections provide vital support information. The last section states those that are implied, and provides for navigation by screenshots. In the main part of this manual, i.e.: second chapter, tasks are explained with numbered steps. In between the steps, explanations given are marked by bullets for differentiation purposes. The steps are backed by screenshots, and the screenshots are given above their explanations. So, going through this manual would give you the feel of actually performing the task.

1.8 How to use this document

If you intend to straightaway get into the installation of this application, start at chapter 2. Ensure if the preparatory requirement for installing are in place by going through section 2.1. Then you can embark on the installation process by going through section 2.2. This also includes configuration activities.
All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07 Page 6

Once the installation is over, go through the section on Customizing. You can refer to rest of the sections, when you are necessitated to do those tasks. If you are looking for information about the manual superficially, then chapter 1 would be appropriate. If you intend to go by the screenshots, refer to Table of Figures that is given in Appendix.

1.9 Related Documents

IP Desktop Soft Phone - User Guide IPDSP Encryption.doc IPDSP VLAN.doc

1.10 Licensing
There is no licensing mechanism included within the IP Desktop Soft Phone. This aspect is managed by the OXE.

1.11 Customer Support

Please contact your system administrator or Alcatel-Lucent Business Partner for support

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 7

2 Preparing for Installation

2.1 Requirements for installing
Below given are minimum requirements, without which, this application will not function properly. So, before installing this application, please ensure these minimum requirements are met.

2.1.1 Hardware
Processor RAM 1.6 GHz Minimum 512 MB for Windows XP 1 GB for Windows Vista 50 MB free space Integrated sound card or USB headset

Disk Space Sound card Note:

The above table lists the minimum hardware requirement. With additional hardware, you can establish many types of connections. Some of them are illustrated in point # 9.2 IP desktop Soft phone in different environments:

2.1.2 USB Headset

USB (preferably USB2) Headset or a USB hands-free is an optional enhancement. By default, the application uses the default PC media devices (PC default microphone and PC speakers). When a USB headset is connected to the user PC with a sound card, IP Desktop Soft Phone can use it instead of the default media devices. When using the headset, the General tab of the Options menu allows the user to select a sound card for ringing and another one for voice. A USB headset connection can make the best out of this facility. You can set the options to send the ringing to the default media device, and voice to USB headset. You can use only the headsets that are compatible with IPDSP. headsets are compatible with IPDSP:
All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

The following
Page 8

Brand AUDIBIT GN Netcom Eutectics Plantronics Tous les combins GN_8120 GN_9330 GN_9350 IPP200 CS60-USB CS50-USB VOYAGER_510 Tiptel 115 : Tiptel Tiptel 117 : Tiptel 217 pid:

Model "Vid_06e6" "Vid_0b0e&Pid_8120" "Vid_0b0e&Pid_9330" "Vid_0b0e&Pid_9350" "Vid_0e7d&Pid_0001" "Vid_047f&Pid_0410" "Vid_047f&Pid_4254" "Vid_047f&Pid_0410" "Vid_6993&Pid_b700" "Vid_6993&Pid_b001"

"Vid_6993&Pid_b001"

Tiptel 218 without webcam pid: "Vid_6993&Pid_b001"

2.1.3 Software
Operating System Windows XP SP2 Windows VISTA

2.1.4 Networking
Network Interface card 10/100 Mbps Ethernet card or Wireless LAN Card 54 Mbps

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 9

2.2 Installation Modes:

You can install this application on 2 different modes. These are: Business and Pro ACD.

Before commencing installation process, you (Administrator) will have to decide, on which mode you intend to install the SoftPhone. This will enable you to select the mode when you are presented with the choices (Screenshot 17), during installation process. Once installed, you cannot switch modes. To change the existing mode, you will have to reinstall the application. Following are the licensing and other differences between using the SoftPhone as Business or as Pro ACD. You can decide on the mode, based on these. Business Pro ACD

They can have their own IP Desktop Soft They can use the same IP Desktop Soft phone phone without buying additional licenses Choosing Business mode will link the Choosing Pro-ACD mode will link the SoftPhone ID to the user (One ID per user SoftPhone ID to the PC (One ID only per account enabled) PC) ID & Config data stored in USER Account ID & Config data stored in ALL USERS

One phone number per user = One License One phone number per pc = One License per user per pc

Limitations: 1. It will not be possible to run 2 instances of the IP Desktop Softphone on the same PC at the same time. 2. If you are using Soft Phone in PRO-ACD mode, BUSINESS users will not be able to have their own phone

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 10

3. It is not possible to switch from PRO-ACD to BUSINESS mode (and vice versa) dynamically: it is necessary to restart installation

2.3 If Previous Version Exists in System

If you have an earlier version of this application installed in your system, then you will have to do the following, before you commence installing this version (3.0.0.6): a) Put the current installation out of service. To do this, i. Run the earlier version of this application that you have installed in you system. ii. Dial the prefix for Out Of Service. Eg 400 This code sends required message to OXE server.

SCREENSHOT 1 Dialing prefix to put out of service

iii. You will be asked to provide your password. Key it in and click: Apply.

SCREENSHOT 2 Confirming your rights using password

iv. Now you have put the application out of service. The screen will show as below.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 11

SCREENSHOT 3 Application out of service

b) Uninstall the earlier application. Now you are ready to install the current version: 3.0.0.6.

2.4 Installation Options

To install this application, you can use either of the following 2 files: 1. IpDesktopSoftPhoneInst_v3.0.0.6.exe OR 2. IPdesktopSoftphone_3_0_0_6.msi IpDesktopSoftPhoneInst_v3.0.0.6.exe If you use this file, the installation is complete, and it does not give you any choices for custom installation. During the process of installation, you are required to input server and other specific details. Thanks to these inputs, you can start using the application immediately after installation. IPdesktopSoftphone_3_0_0_6.msi If you use this file for installation, then you get the option for selecting either: Typical Custom or Complete

installation of the application. You can select the modules for installation, in different ways. Besides, during the process of installation, it provides a view of different partitions in your hard disk. There, it provides details of their sizes and space availability in each, for installation. But by the time you complete installation, you would not have fed in server details and your choice of Business/ProACD. You will have to configure them manually, post installation. To overcome this, you can invoke this installation file from Command Prompt, where you can provide Server address, language and ProACD/Business option as parameters. This way, when installation completes, all

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 12

the required information would have been fed in. This enables you to start using the application, immediately. In subsequent pages, you can find details of installing the application, using all these methods.

3 Installation using: IpDesktopSoftPhoneInst_v3.0.0.6.exe

The following steps detail the installation IpDesktopSoftPhoneInst_v3.0.0.6.exe process, using the file:

1. Ensure that hardware, software and networking requirements are in place, as prescribed. 2. Close all running applications 3. Run the file: IpDesktopSoftPhoneInst_v3.0.0.6.exe 4. This displays the following screen. In it, select the language in which you intend to install this application

SCREENSHOT 4 Select Language

5. Click OK.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 13

SCREENSHOT 5 Commencement of Installation

This screen is for your information only.

6. Click Next.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 14

SCREENSHOT 6 License Agreement

This page displays the Alcatel-Lucent License Agreement. Read through the agreement, and if it is acceptable to you, click on the 1st radio button against: I accept the terms in the License Agreement If you click on the other radio button, then the installation process will abort, when you click Next. This cancellation happens after getting your confirmation.

7. Click Next.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 15

SCREENSHOT 7 Select Components to install

This screen lets you to select components to install. IP Desktop Soft-Phone is a mandatory installation and so you do not have choice there you cannot undo the selection.

8. By default, all components are selected. If any of those components are already installed in your system, you can undo their selection. 9. Click Next.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 16

SCREENSHOT 8 Installing Location

10. This screen displays the folder where it will install the files by default. If needed, you can change this folder, by using the Browse button nearby. 11. At bottom left, you can see the status of space availability for installation. If the space available is short of required space, then delete files to make room for installation. 12. Click Install

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 17

SCREENSHOT 9 Installation progress bar

Now the installation is in progress. This screen shows the progress bar at the top. It displays the files actually installed, in the box below. This is for your information only. This process would take a while. So, wait. If .NET Framework 2.0 is not present in your system, then, its installation begins. Its opening screen is given below. if you have installed the previous version of this application, .NET framework will already be existing in your system. So, you will not see the screens shown below.

SCREENSHOT 10 .NET Framework 2.0 Installation process is on

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 18

This screen would automatically close, and the next screen would display. So, wait.

SCREENSHOT 11 .NET Framework 2.0 Installation

This is Welcome screen. Click Next to continue.

SCREENSHOT 12 .NET Framework 2.0 Installation progress bar

The above screen shows up automatically. installing .NET Framework.

This shows the progress of

13. Click Next.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 19

SCREENSHOT 13 .NET Framework 2.0 License Agreement

This screen displays the End User License Agreement for installation of .NET Framework. To move further into installation, tick the checkbox against: I accept the terms of the License Agreement.

14. Click Install.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 20

SCREENSHOT 14 .NET Framework installing progress bar

This is the progress bar showing installation of .NET Framework. Wait until it completes. Once it completes, the screen would change as given below:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 21

SCREENSHOT 15 .NET Framework 2.0 setup complete

This shows completion of .NET Framework installation.

15. Click Finish to continue.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 22

SCREENSHOT 16 Connectivity Information

Installation of software is complete. In the above screen you need to give connectivity information.

16. In the 1st entry box, give the IP address of your Call Server (ROLE MAIN Address). This is mandatory 17. In the 2nd entry box, enter the IP address of the backup server for the main Call Server. You can give it if you have such a backup server. If you have Call server Duplication configured, then here you have to enter the Role MAIN address of the Standby Call Server. This is optional At this point, the application will not connect to the Server. So, it will not give any error messages for wrong entries. So, take care to make the correct entries.

18. Click Next.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 23

SCREENSHOT 17 Customizing - 1

19. In the 1st entry box, the URL for automatic updating is given by default. You can change this entry if you want to update the application from an intranet website. (for security reasons) 20. Second entry box is for selecting the language for this application. Here, the languages are listed in abbreviated form. Those abbreviations and their expansions are tabulated below: Abbreviation En Fr It Expansion

Ge Es

French Italian

English

German Spanish

No Ko

Pt

Norwegian Korean

Portuguese

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 24

Abbreviation Ch Ru Fi Nl

Russian Finnish

Chinese

Dutch

Expansion

Select your desired language. 21. The 3rd entry box lists the available skins for the phone display. They are: 4068 Medium Aqua 4068 Medium Black 4068 Medium Metal Mini 4068 Aqua Blue Mini 4068 Aqua White Mini 4068 Black Mini 4068 Metal SkinPEPS

Below, you can see the screenshot of each of the above listed skins:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 25

Menu Choice: 4068 Medium Aqua

SCREENSHOT 18 Skin: 4068 Medium Aqua

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 26

Menu Choice: 4068 Medium Black

SCREENSHOT 19 Skin: 4068 Medium Black

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 27

Menu Choice: 4068 Medium Metal

SCREENSHOT 20 Skin: 4068 Medium Metal

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 28

Menu Choice: Mini 4068 Aqua Blue

SCREENSHOT 21 Skin: Mini 4068 Aqua Blue

Menu Choice: Mini 4068 Aqua White

SCREENSHOT 22 Skin: Mini 4068 Aqua White

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 29

Menu Choice: Mini 4068 Black

SCREENSHOT 23 Skin: Mini 4068 Black

Menu Choice: Mini 4068 Metal

SCREENSHOT 24 Skin: Mini 4068 Metal

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 30

Menu Choice: SkinPEPS

SCREENSHOT 25 Skin: SkinPEPS Displays only at bottom right of screen

22. Based on the above screenshots, make your choice of skin here. 23. To activate automatic updates, tick the checkbox at the bottom of the screen. 24. Select required mode - Business or Pro-ACD, according to the given guidance. If you select Business, different users of this application are given different MAC IDs. If you select Pro-ACD, then despite the number of users, the MAC ID remains same. 25. Click Next.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 31

SCREENSHOT 26 Setup complete

The above screen informs of the completion of setup process.

26. To run this application immediately, tick the checkbox in this screen. 27. Click Finish to close this screen.

SCREENSHOT 27 Setup complete Reboot confirmation

This screen displays only when .NET Framework 2.0 is installed during this installation process. Otherwise there is no need to reboot.

28. Installation is now complete. For the installation to take effect, reboot the system. To do so, click Yes In the screen above. 29. If you click No, the system will not reboot. But you will not be able to use the soft-phone.
All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07 Page 32

4 Installation using: IPdesktopSoftphone_3_0_0_6.msi

The following steps detail the IPdesktopSoftphone_3_0_0_6.msi installation process, using the file: 1. Ensure that hardware, software and networking requirements are in place, as prescribed. 2. Ensure that Microsoft .NET Framework 2.0 is already installed. Otherwise, when you invoke the installation process, the following warning message would display, and the installation process will be aborted:

SCREENSHOT 28 Warning message when .NET is not installed

3. Close all running applications 4. To start the installation, follow the steps below: 5. Open command prompt screen. You can do this by clicking on: Start Run. In the screen that displays, key in: cmd. This opens the command prompt screen. 6. Move to the directory, where the file: IPdesktopSoftphone_3_0_0_6.msi is located. 7. There, key in the following: msiexec /i IPdesktopSoftphone_3_0_0_6.msi PBXADDR=<server address> MODEPROACD=<number> Language=<Number> Below table explains the different components that constitute this command:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 33

Component msiexec

Description Microsoft command to execute file with msi extension Optional parameter for Status Messages. For more of such options, you can key in the following at command prompt: msiexec /?

/i

IPdesktopSoftphone_3_0_0_6.msi Name of file that is to be executed. PBXADDR= Command that indicates that the information that follows this command is the address of PBX server Address of PBX server Command that indicates that the information that follows this command is the chosen mode (business or ProACD) Here, key in: 0 for Business option 1 for ProACD option Command that indicates that the information that follows this command refers to the interactive language to be used during installation. Give any of the following integers here. The numbers and their related languages are listed below: 4 5 6 11
All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

<server address> MODEPROACD=

<number>

Language=

<number>

Generic Alcatel English French Italian German

Page 34

Component 12 15 18 22 23 24 40 42

Description Portuguese Spanish Norvegian Finnish Dutch Russian Chinese Korean

8. After keying the command, the installation process would commence and the application will open the following screen.

SCREENSHOT 29 Microsoft utility preparing to install

9. The Windows utility is preparing for installation. change. Wait.

It will automatically

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 35

SCREENSHOT 30 Welcome screen

10. This is Welcome screen. Click Next to move to next screen.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 36

SCREENSHOT 31 License Agreement

11. This is License agreement. You can use the scroll bar to read it fully. Check the box below the agreement text box to agree to this License. Then click Next.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 37

SCREENSHOT 32 Setup type selection

12. In this page, you can select the type of installation: a. Type: Custom: If you select this type, you can select the portions that should be installed. You can use this option, in the following manner: i) Click on the button: Custom. This opens the following screen:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 38

SCREENSHOT 33 Items to choose for installation

ii) Here, IpDesktopPone is expanded. You can click on any of these, to customize them. iii) When you click on: IpDesktopPone, the following sub-option list displays, for you to select from:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 39

SCREENSHOT 34 Sub-options to choose from - IpDesktopPhone

iv) From the sub-option that displays, you can make your choice. v) You get the following display, when you click on: Program. You can make your choice likewise.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 40

SCREENSHOT 35 Sub-options to choose from - Program

vi) Below are the choices for Documentation.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 41

SCREENSHOT 36 Sub-options to choose from - Documentation

vii) The button: Disk Usage displays hard disk details. Based on that information, you can decide on the hard disk or its partition, to install the application. Its display is below:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 42

SCREENSHOT 37 Hard disk details

viii) Click OK to close this screen. ix) Once done, click next to move on.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 43

SCREENSHOT 38 Ready to install

13. Whatever choice you make among Typical or Complete, the above screen displays. If you select: Custom, then also, after making your selections, you reach this page. 14. In this screen, click on Install button to move to next page. 15. This triggers the installation process. progress: The screen that follows, shows its

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 44

SCREENSHOT 39 Installation progress bar

16. Wait until the process completes.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 45

SCREENSHOT 40 Installation complete

17. The installation process is now complete. Click on the Finish button to close this screen.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 46

5 Launching the Application

Before you could start using the soft phone, you will have to create a directory number for this soft phone on the OXE. The minimum requirement of OXE version is: Release 7.1 (F5-401-11-d) 1. In the call server, create a user. Sample text for this process is given below:

SCREENSHOT 41 User creation in OXE

2. TSC IP Emulation should be set to Yes as shown in the following illustration:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 47

SCREENSHOT 42 TSC IP Emulation

Yes

3. Click on the following icon that the application had placed during the process of installing this application.

Alternatively, from the task bar, you can activate the application using following path: Start Programs IpDesktopSoftPhone IpDesktopSoftPhone 4. When you launch the application for the first time, it displays the image of the IP Touch phone, overlapped by the Audio Tuning Wizard window as given below. This need to be completed during the first launch of the application, here, you can view the various audio devices and configure them as needed. You can find details of these under point #6.2 Audio Wizard in this manual.

SCREENSHOT 43 Display on first launch

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 48

5. Once you have completed the settings of the Audio Tuning Wizard, close the screen. Now you will have to deal with the display screen of IP Touch phone. 6. Initially, there will not be any connectivity. So, the display panel displays as follows:

SCREENSHOT 44 State of no connectivity

7. Press any key. This changes the display as:

SCREENSHOT 45 Commencement of Registration process

8. For this display, key in your extension number. Once you have entered the configured number it automatically moves to next screen. The next screen prompts for the related password. The default password is: 0000. This screen looks like this:

SCREENSHOT 46 Enter Password

9. Once you have keyed in the password, it moves to next screen. No need to press Enter key. The next screen is for confirmation. It displays like this:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 49

SCREENSHOT 47 Registration confirmation

10. The above screen does not display during a new installation. It displays only during reinstallation. In this screen, press 1 to register. This confirms your registration, and initiates connectivity. So the display turns to:

SCREENSHOT 48 Connection in progress

11. Once this connecting process is over, you can see the following display:

SCREENSHOT 49 Connected and ready for use

12. Now the application is ready for use by the user.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 50

6 Customizing:
In the system administration level, you can customize the application to suit your existing environment. You can do this customization, only after installing the application. To embark on this task, you will have to right-click on the phone image. Then you can customize under following heads: Applications Audio Wizard Volume Level

6.1 Applications
Steps to customize Applications are given below: 1. Right-click on the phone image, but outside the display window. 2. In the list box that displays, select: Options Applications, as given below:

3. This displays options screen with 4 tabs as given below:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 51

SCREENSHOT 50 General Tab

4. By default, the General tab opens. For a System Administrator, only the field: AOM that is marked by the red outline is relevant. In this dropdown box, 3 following options are available: AOM10 AOMEL NONE

The users choice here, impacts the number of additional, programmable buttons, called Add-On Module buttons, that is optionally available to the phone.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 52

Illustration: Below is the phone image:

SCREENSHOT 51 Button for extending AOM key pad

In the phone image, when you click on the button that the arrow points to, then a pad extends. It contains AOM (Add-on Module) buttons. The programming that you do in the OXE server determines the number of buttons that this pad would contain. It has the following 2 choices: AOM10: To provide for 10-key extending pad, in the OXE server, you will have to key in as given below: AOM10 (Add-on Module 10 keys) - Extending pad with 10 buttons AOMEL (Add-on Module Electronic 14 keys) Extending pad with 14 buttons.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 53

SCREENSHOT 52 OXE programming for AOM 10 keys

In the above sample, note the portion enclosed within red box. This is the place where you will have to make the change. Once you do this, then the phone display will have the extending pad with 10 buttons option. When the pad is extended, it will look as below:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 54

SCREENSHOT 53 AOM keypad 10 keys

AOMEL: To provide for 14-key extending pad, in the OXE server, you will have to key in as given below:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 55

SCREENSHOT 54 OXE programming for AOM 14 keys

In the above sample, note the portion enclosed within red box. This is the place where you will have to make the change. Once you do this, then the phone display will have the option of extending pad with 14 buttons. When the pad is extended, it will look as below:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 56

SCREENSHOT 55 AOM keypad 14 keys

In the General tab, in the field: AOM, the user can opt for either AOM10 of AOMEL, based on your programming only. 5. Based on your programming in OXE server, make your selection 6. The tab: Sounds is relevant to users only. You can skip this tab, and click on the tab: Network. This opens the following page:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 57

SCREENSHOT 56 Network configuration

7. In the entry boxes in this tab, you can see the values you had entered during the installation process. Now, you can change these default entries as you require. The following table explains these entries:
Field Name Network Adaptor: Description Name Tftp: Tftp Server (Main) Description This refers to the Ethernet card. The application automatically detects existing cards in the system, and lists them here. You can select the card you prefer. This automatically displays. This is for your information. You cannot change it.

This refers to the IP address of your call server. Page 58

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Field Name

Description The entry you see here is the one you had keyed in during the installation process. You can change if required. Any error in the entry would deprive connectivity. This is a mandatory entry.

Tftp Server (Backup)

Optional. This is the IP address of the 2nd CPU. Please enter the 2nd Role MAIN IP address here if Spacial redundancy is managed.

PCS

If there is a Passive call server configured, The IP address of the Passive call server is displayed here. This value is automatically provided by the NOE protocol and cannot be modified manually. This is the MAC ID for your terminal, that is automatically generated by the application. You cannot change it.

Phone Identifier

8. Once you have completed making changes, click on Apply to save your entries. If you click OK, it saves the entries and closes this screen. 9. Move on to 4th tab. Its displays as below:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 59

SCREENSHOT 57 Automatic Update configuration

10. This tab is specifically for customizing automatic updates. The table below explains the components of this tab:
Field Name Default button Description Cancels the changes made and displays default values

By default, it is not ticked. Tick this checkbox to update the Activate automatic application automatically. If this is not ticked, then, the update application will not be updated automatically. Besides, entries in this page will not have any effect. You can see the default display in the above screenshot. If URL for automatic needed, you can change this. This will be necessary if you update intend to update from any source other than the given URL. This URL is mandatory, if you opt for automatic updating. Proxy This is optional. internet. Give Proxy details for connecting to

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 60

Field Name Port Login

Description Give the Port id for the Proxy. Give the Login name used for accessing URL if necessary.

Password Apply OK Cancel

Saves the changes

Give the Password used for accessing URL if necessary. Undoes the changes made

Saves the changes and closes the screen.

11. Now the application is operational. You can change the settings whenever you require, following these steps. 12. The automatic update will check for availability of updates during the launch of this application. It will display a message if an updated version is available.

6.2 Audio Wizard

This section is dedicated for configuring different types of audio devices for the application. Whenever you add/change audio devices, you will have to run this wizard again and select your preferences. Otherwise, the changes in audio hardware will not have any effect. Follow the steps below to customize: 1. 2. Right-click on the phone image, but outside the display window. In the list box that displays, select: Options below: AudioWizard, as given

3.

This opens the starting page for customizing. As given in that page, close all running programs that deal with audio playing or recording.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 61

SCREENSHOT 58 Audio customization starting page

4.

Click Next to open the following page:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 62

SCREENSHOT 59 Audio customization Main page

In the above screen, the installed audio devices are listed in the dropdown boxes. You can select different or same device for the different tasks listed. The following table explains the fields in this page:
Field Name/Icon Description

In this dropdown box, the audio device that you select will be utilized for phones output, and is heard through speakers.

Ring - 1 Ring - 2 Ringing AEC

You can see the phones output device you had chosen, replicated here. This is default. If you do not want to use this, then uncheck the nearby checkbox. This is second ringing device for you to select

The audio device you select here picks up your speech and inputs into the phone.

When you click on this button, it opens Explorer window. From there, select a .wav file. The phone uses this file while testing the audio properties. The file you have selected, displays above this button.

This refers to the audibility of what you speak, in your earpiece. When you tick this box, this echo is done away with. Page 63

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

5.

Once done with this page, click Next. The following screen opens:

SCREENSHOT 60 To hang up using audio device

If you tick the check box in this page, you can hang up a call using the audio device. When you put off the audio device, the call is ends. If this check box is not ticked, this facility will not be available. Once done with this page, click Next. The following screen opens:

6.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 64

SCREENSHOT 61 Audio Device Volume Setting - 1

This page is for setting the volume level of phone speakers. The device that this setting impacts, is given at the top of this page. Once you have set the levels, you can get a sample of this volume, by clicking on the Test button at left. When you do so, it plays the file selected for Ringing in the previous step. After completing this page, click Next. The following screen opens:

7.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 65

SCREENSHOT 62 Audio Device Volume Setting - 2

This page is for setting the volume level of phone speakers, that uses another device . The device that this setting impacts, is given at the top of this page. Once you have set the levels, you can get a sample of this volume, by clicking on the Test button at left. When you do so, it plays the file selected for Ringing in the previous step. After completing this page, click Next. The following screen opens:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 66

SCREENSHOT 63 Audio Configuration completed

8. 9.

Now you have completed configuration in this section. Click Finish to close this screen. The volume set with the Audio Wizard will be the volume level and sensitivity level for the Speakers and mic respectively.The volume changes during the conversation period can be done with the volume level option which is mentioned below.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 67

6.3 Volume Level

By default, the volume you had set using Audio Tuning Wizard will be active. But if you want to temporarily change the volume during conversation, then you can use this facility. Once the call is over, this setting will not be in effect Under this link, you have only one page. To access this page: 1. 2. Right-click on the phone image, but outside the display window. In the list box that displays, select: Options below: Volume Level, as given

3.

This opens the following page:

SCREENSHOT 64 Audio Tuning

4. 5.

In this page, you can set the volume by moving the handle up and down. Once done, click on the x given at top right to close this window.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 68

6.4 UDP used ports

The table below, lists the ports that this application uses:
Purpose Phone configuration (file download for configuration information) Out going flow Out going flow Incoming flow Incoming flow Signaling flow Protocol TFTP Device 1 Soft Phone Device 1 port 1024 to 65535/udp 32518/udp 32519/udp Dyn_Voice (*)/udp Dyn_Voice (*)/udp Device 2 TFTP Server Device 2 port 69/udp 10000 to 10499/udp Dyn_Voice (*)/udp Dyn_Voice (*)/udp

RTP RTCP RTP RTCP UA

Soft Phone Soft Phone GD, GA, INT_IP A+B GD, GA, INT_IP A+B

GD, GA, INT_IP A+B GD, GA, INT_IP A+B Soft Phone Soft Phone

32514(BP**+2)/ udp 32515(BP**+3)/ udp

Soft Phone

32512(BP**)/u GD, GA, dp INT_IP A+B

32640(BP**+128 )/udp

Note: (*) This port range is only used to transport voice using RTP protocol and fax using T.38 protocol. The lower bound range is 32000 for OXE <= R5.0Lx and 32512 for OXE >= R5.1. The upper bound range is 32255 for OXE <= R5.0Lx and 32767 for OXE >= R5.1. (**) The Basic Port is retrieved from the OmniPCX at TFTP initialization step.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 69

7 Uninstalling
This application comes to you with inbuilt uninstalling facility. This process uninstalls this application only. It does not uninstall supporting software that it installed during its installation process.

7.1 Pre-uninstall Procedure

7.1.1 Close the application
Before attempting to uninstall the application, close it. To do so, right click on the body of the softphone, and select Quit. If you try to uninstall the application before closing it, it will display the following error message:

SCREENSHOT 65 Language Selection

After closing the application, you can commence uninstalling.

7.1.2 Uninstall File

To uninstall, you will have to use the same type of file that was used for installing. There are two types of files for installing: IpDesktopSoftPhoneInst_v3.0.0.6.exe IPdesktopSoftphone_3_0_0_6.msi

When you uninstall this application, the extension - .exe or .msi should be identical with the file used for installing. When you uninstall from Windows using the following path, then it takes care of this issue automatically: Start Programs IpDesktopSoftPhone Uninstall When you invoke the above command, it looks like below:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 70

SCREENSHOT 66 Language Selection

When you are uninstalling from command prompt, you will have to use different commands, as explained later here.

7.2 Uninstalling Using: Windows

To uninstall using Windows, follow the below given steps: 1. From the taskbar, activate the uninstalling file using the following path: Start Programs IpDesktopSoft-phone Uninstall

SCREENSHOT 67 Language Selection

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 71

2. This displays the above screen. Select the Language to your preference. Available choices are: English & French. 3. Click OK.

SCREENSHOT 68 Commencement of uninstalling

4. This page is for your information only. Click Next

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 72

SCREENSHOT 69 Uninstalling location 5.

This page is also for your information only. uninstalling the application. Click Uninstall.

This tells you from which folder, it is

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 73

SCREENSHOT 70 Uninstalling progress bar

This page shows the progress bar that shows the progress of uninstalling process.

SCREENSHOT 71 Directory removal confirmation

6. During the progress of this uninstalling, this screen shows up. This is to get your confirmation for deleting the directory that the installation process had created. Click Yes. Clicking No retains this directory

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 74

SCREENSHOT 72 Uninstalling complete

7. Now, the uninstalling process is over. Click Finish to close this screen.

7.3 Uninstalling Using: .msi File from command prompt

To start the uninstalling, follow the steps below: 1. Open command prompt screen. You can do this by clicking on: Start Run. In the screen that displays, key in: cmd. This opens the command prompt screen. 2. Move to the directory, where the file: IPdesktopSoftphone_3_0_0_6.msi is located. 3. There, key in the following: msiexec /x IPdesktopSoftphone_3_0_0_6.msi PBXADDR=<server address> MODEPROACD=<number> Language=<Number> Below table explains the different components that constitute this command: Component
All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Description
Page 75

Component msiexec

Description Microsoft command to execute file with msi extension Parameter indicating: Uninstall

/x

IPdesktopSoftphone_3_0_0_6.msi Name of the file that is to be executed. PBXADDR= Command that indicates that the information that follows this command is the address of PBX server Address of PBX server Command that indicates that the information that follows this command is the chosen mode (business or ProACD) Here, key in: 0 for Business option 1 for ProACD option Command that indicates that the information that follows this command refers to the interactive language to be used during uninstalling. Give any of the following integers here. The numbers and their related languages are listed below: 4 5 6 11 12 15 18
All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

<server address> MODEPROACD=

<number>

Language=

<number>

Generic Alcatel English French Italian German Portuguese Spanish Norwegian

Page 76

Component 22 23 24 40 42 Finnish Dutch Russian Chinese Korean

Description

4. After keying the command, the uninstalling process would commence and the application will open the following screen.

SCREENSHOT 73 Uninstalling Confirmation screen

5. Above screen is for confirmation. uninstalling process.

Click on Yes.

This commences the

SCREENSHOT 74 Uninstalling progress bar

6. The above screen displays the progress of uninstalling. while. Wait until it completes 7. Once uninstalling is over, this screen closes. uninstalling is complete.

It would take a

This indicated that the

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 77

8 Trouble Shooting
The table below lists some of the problems you could face, along with their remedial measures:
# Problem o 1. Connection establishment fails o o Remedy Check if your network connection is enabled. Check that tftp address is correct and make sure you reach it by a ping You may be using the wrong network adapter: check in Network tab using Options Application menu

2.

Set is out of service message is shown on IP Desktop Soft Phone screen

3.

When the agent is logged-in, if the Softphone program is closed, or if the IP connection of the PC is lost, the Softphone set does not work. Instead, when it is opened, it gives the following message on the Soft phones screen: "Set not registered." To overcome this situation, we need to force log-off the agent, and re-open the Softphone program.

If you get this during the Installation, then one of the reason could be when the IP-Soft phone Emulation is not activated in the PABX: Ask your administrator to activate it in mgr > Users >Descend Hierarchy > TSC IP Users > Review and Modify >Directory Number (Enter the number of the terminal) > Ctrl+V >Select parameter IP Softphone Emulation > press Enter to change the parameter from NO to YES at PABX side This is a normal behavior. However, to solve this problem, move the extension type from 4068 to 4037 for the Agent and set the following parameters: mgr > Users >Descend Hierarchy > TSC IP Users > Review and Modify >Directory Number (Enter the number of the terminal) > Ctrl+V >Select parameter IP Softphone Emulation > press Enter to change the parameter from NO to YES In the Descend Hierarchy of Users, set IP Softphone Emulation to "No." To do this, login to the OXE (call server). Follow the path: Users Descend Hierarchy TSC IP Users Review and Modify Directory Number (Enter the number of the terminal) press Ctrl+V. In the list that displays, for Reset for update authorized, change the setting from "True" to "False."

4.

When logged in as IP Softphone agent, Softphone frequently disconnects with a message: "Set not registered."

5. 6.

VPN UAIP user is unable to communicate with another UAIP user on LAN environment. Noise during conversation

Check the Firewall or the Access lists. Ensure that the ports used by the Softphone are OPEN (refer the Section: 6.4 for more details) Management to be performed at PBX end:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 78

System Down Hierarchy Other system param Down Hierarchy Compression Param Review Modify Voice Activity Detection : False. 7. The application does not initialize in laptops connected to LAN through VPN The application does not start with the system boot

This is due to problem in the LAN. Please contact your Administrator in this respect. May be due to network settings (firewall etc) Copy either the .exe file of the application, or its shortcut and paste it in the following directory: C:\Documents and Settings\user\ Start Menu\Programs\Startup

8.

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 79

9 Appendixes
9.1 Common Features
1. Outline numbering is followed throughout this guide 2. To indicate emphasis or to distinguish objects in a sentence, they are given Bold formatting. 3. Process of accomplishing tasks is given in numbered steps. 4. In a process, intervening explanations are bulleted. 5. As much as possible, screenshots are provided to visualize actual displays

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 80

9.2 IP desktop Softphone in different environments

IP desktop Softphone in basic LAN Environment:

IP desktop Softphone in a Wi-Fi Environment:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 81

IP desktop Softphone in various Operating Systems:

IP desktop Softphone in a VPN Environment:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 82

IP desktop Softphone in a 802.1 P/Q voice priority is enabled environment:

IP desktop Softphone in a Dual Call Server environment:

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 83

9.3 Table of Figures

SCREENSHOT 1 Dialing prefix to put out of service ............................................... 11 SCREENSHOT 3 Application out of service .......................................................... 12 SCREENSHOT 4 Select Language ...................................................................... 13

SCREENSHOT 2 Confirming your rights using password ........................................... 11

SCREENSHOT 5 Commencement of Installation .................................................... 14 SCREENSHOT 6 License Agreement .................................................................. 15 SCREENSHOT 7 Select Components to install....................................................... 16 SCREENSHOT 9 Installation progress bar ............................................................ 18

SCREENSHOT 8 Installing Location ................................................................... 17 SCREENSHOT 10 .NET Framework 2.0 Installation process is on ................................ 18 SCREENSHOT 11 .NET Framework 2.0 Installation................................................. 19 SCREENSHOT 12 .NET Framework 2.0 Installation progress bar ................................. 19 SCREENSHOT 14 .NET Framework installing progress bar ........................................ 21 SCREENSHOT 16 Connectivity Information .......................................................... 23 SCREENSHOT 17 Customizing - 1 ..................................................................... 24 SCREENSHOT 18 Skin: 4068 Medium Aqua........................................................... 26 SCREENSHOT 19 Skin: 4068 Medium Black .......................................................... 27 SCREENSHOT 21 Skin: Mini 4068 Aqua Blue ......................................................... 29 SCREENSHOT 23 Skin: Mini 4068 Black............................................................... 30 SCREENSHOT 25 Skin: SkinPEPS....................................................................... 31 SCREENSHOT 20 Skin: 4068 Medium Metal .......................................................... 28 SCREENSHOT 22 Skin: Mini 4068 Aqua White ....................................................... 29 SCREENSHOT 24 Skin: Mini 4068 Metal .............................................................. 30 SCREENSHOT 26 Setup complete ..................................................................... 32

SCREENSHOT 13 .NET Framework 2.0 License Agreement ....................................... 20 SCREENSHOT 15 .NET Framework 2.0 setup complete ........................................... 22

SCREENSHOT 27 Setup complete Reboot confirmation ......................................... 32 SCREENSHOT 28 Warning message when .NET is not installed .................................. 33
All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 84

SCREENSHOT 29 Microsoft utility preparing to install............................................. 35 SCREENSHOT 30 Welcome screen .................................................................... 36 SCREENSHOT 31 License Agreement ................................................................. 37

SCREENSHOT 32 Setup type selection ............................................................... 38

SCREENSHOT 33 Items to choose for installation .................................................. 39

SCREENSHOT 34 Sub-options to choose from - IpDesktopPhone................................. 40 SCREENSHOT 35 Sub-options to choose from - Program .......................................... 41 SCREENSHOT 37 Hard disk details .................................................................... 43 SCREENSHOT 38 Ready to install ..................................................................... 44 SCREENSHOT 39 Installation progress bar........................................................... 45 SCREENSHOT 36 Sub-options to choose from - Documentation.................................. 42

SCREENSHOT 40 Installation complete .............................................................. 46 SCREENSHOT 41 User creation in OXE ............................................................... 47 SCREENSHOT 42 TSC IP Emulation SCREENSHOT 43 Display on first launch ............................................................. 48 Yes ............................................................ 48

SCREENSHOT 44 State of no connectivity ........................................................... 49 SCREENSHOT 46 Enter Password...................................................................... 49

SCREENSHOT 45 Commencement of Registration process........................................ 49 SCREENSHOT 47 Registration confirmation ......................................................... 50 SCREENSHOT 48 Connection in progress ............................................................ 50 SCREENSHOT 50 General Tab ......................................................................... 52 SCREENSHOT 49 Connected and ready for use ..................................................... 50 SCREENSHOT 51 Button for extending AOM key pad .............................................. 53 SCREENSHOT 52 OXE programming for AOM 10 keys .............................................. 54 SCREENSHOT 53 AOM keypad 10 keys.............................................................. 55 SCREENSHOT 55 AOM keypad 14 keys.............................................................. 57 SCREENSHOT 54 OXE programming for AOM 14 keys .............................................. 56 SCREENSHOT 56 Network configuration ............................................................. 58

SCREENSHOT 57 Automatic Update configuration ................................................. 60 SCREENSHOT 59 Audio customization Main page................................................. 63 SCREENSHOT 60 To hang up using audio device ................................................... 64 SCREENSHOT 61 Audio Device Volume Setting - 1 ................................................. 65
All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

SCREENSHOT 58 Audio customization starting page............................................. 62

Page 85

SCREENSHOT 62 Audio Device Volume Setting - 2 ................................................. 66 SCREENSHOT 64 Audio Tuning......................................................................... 68 SCREENSHOT 65 Language Selection................................................................. 70 SCREENSHOT 66 Language Selection................................................................. 71 SCREENSHOT 67 Language Selection................................................................. 71

SCREENSHOT 63 Audio Configuration completed .................................................. 67

SCREENSHOT 68 Commencement of uninstalling .................................................. 72 SCREENSHOT 69 Uninstalling location ............................................................... 73 SCREENSHOT 70 Uninstalling progress bar .......................................................... 74

SCREENSHOT 71 Directory removal confirmation.................................................. 74 SCREENSHOT 72 Uninstalling complete.............................................................. 75 SCREENSHOT 74 Uninstalling progress bar ........................................................ 77 SCREENSHOT 73 Uninstalling Confirmation screen .............................................. 77

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 86

www.alcatel-lucent.com

All Rights Reserved Alcatel-Lucent 2007 Document Reference Number ZA956070711-01 Ed07

Page 87