Cisco Networking Academy

Close Window

Assessment System Exam Viewer - ENetwork Final Exam - CCNA Exploration: Network Fundamentals (Version 4.0)

Below you will find the assessment items as presented on the exam as well as the scoring rules associated with the item. Cisco Networking Academy content is copyrighted and the unauthorized posting, distribution or sharing of this exam content is prohibited. 1 Which OSI layer manages data segments? application layer presentation layer session layer transport layer Observable 1 correctness of response Description 2 points for Option 4 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

4.1.3 Supporting Reliable Communication

Refer to the exhibit. The diagram represents the process of sending e-mail between clients. Which list correctly identifies the component or protocol used at each numbered stage of the diagram? 1.MUA 2.MDA 3.MTA 4.SMTP 5.MTA 6.POP 7.MDA 8.MUA 1.MUA 2.POP 3.MDA 4.SMTP 5.MTA 6.MDA 7.SMTP 8.MUA 1.MUA 2.POP 3.SMTP 4.MDA 5.MTA 6.SMTP 7.POP 8.MUA 1.MUA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MDA 7.POP 8.MUA Observable 1 correctness of response Description 2 points for Option 4 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 3.3.3 E-mail Services and SMTP/POP Protocols A user enters http://www.cisco.com/web1.htm in the address line of a browser. Which statement is true about this transaction? The "http" portion indicates the protocol that is being used.

The "web1.htm" portion is the specific service name. The retrieved web page will be displayed in URL code. The "www.cisco.com" is the name of the web page file that is called. Observable 1 correctness of response Description 2 points for Option 1 0 points for any other option Max Value 2

This item references content from the following areas:

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

CCNA Exploration: Network Fundamentals

3.3.2 WWW Service and HTTP

Which range of port numbers are reserved for services that are commonly used by applications that run on servers? 0 to 255 0 to 1023 1024 to 49151 49152 to 65535 Observable Description 2 points for Option 2 0 points for any other option Max Value 2

correctness of response

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 4.1.5 Port Addressing Which OSI layer offers ordered data reconstruction services? application layer

network layer presentation layer session layer transport layer Observable 1 correctness of response Description 2 points for Option 5 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 4.1.2 Controlling the Conversations Which two functions of the OSI model occur at layer two? (Choose two.) physical addressing

encoding routing cabling media access control Observable 1 correctness of response Description Option 1 and Option 5 are correct. 1 point for each correct option. 0 points if more options are selected than required. Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 7.1.1 Data Link Layer - Supporting and Connecting to Upper Layer Services Which information is used by the router to determine the path between the source and destination hosts? the host portion of the IP address

the network portion of the IP address host default gateway address the MAC address Observable 1 correctness of response Description 2 points for Option 2 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 2.5.3 Getting the Data through the Internetwork A network has grown too large for technicians to configure network addresses and hosts files for name resolution. Which two application layer services should be added to the server to allow these needs to be satisfied dynamically? (Choose two.) DNS

FTP

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

DHCP HTTP SMTP Observable 1 correctness of response Description Option 1 and Option 3 are correct. 1 point for each correct option. 0 points if more options are selected than required. Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l l

3.3.1 DNS Services and Protocol 3.3.5 DHCP

Refer to the exhibit. Which Layer 2 protocol could be used inside nework A and network C? IP TCP UDP Ethernet Observable 1 correctness of response Description 2 points for Option 4 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 9.1.5 Physical Implementations of Ethernet 10 Which option shows the PDU that contains the Layer 3 source and destination addressing for a packet?

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

Observable 1 correctness of response

Description 2 points for Option 3 0 points for any other option

Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 5.1.7 IP v4 Packet Header 11 A technician is setting up a workgroup for six users and wants to allow users to share files without setting up a server. Which application layer protocol will provide for peer-to-peer file sharing in a workgroup? DNS

SMB HTTP DHCP Observable 1 correctness of response Description 2 points for Option 2 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 3.3.6 File Sharing Services and SMB Protocol 12 What are three characteristics of CSMA/CD? (Choose three.) Devices listen to the media and transmit data only when they cannot detect another signal on the media.

All devices on the media can hear all communications. Devices communicate based on a configured priority. After a collision occurs, the devices that caused the collision have first priority when attempting to retransmit. When a collision occurs, all devices stop transmitting for a randomly generated period of time. CSMA/CD uses a token system to avoid collisions. Observable 1 correctness of response Description Option 1, Option 2, and Option 5 are correct. 1 point for each correct option. 0 points if more options are selected than required. Max Value 3

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 7.2.2 Media Access Control for Shared Media 13 Which device should be used for enabling a host to communicate with another host on a different network? switch

hub router host Observable 1 correctness of response Description 2 points for Option 3 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

5.3.3 A Gateway - The Way Out of Our Network

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

14

Refer to the exhibit. Assume all devices are using default configurations. How many subnets are required to address the topology that is shown? 1 3 4 5 7 Observable 1 correctness of response Description 2 points for Option 2 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

10.3.2 How Many Networks?

15

Refer to the exhibit. When computer A sends a frame to computer D, what computers receive the frame? only computer D only computer A and computer D only computer B, computer C, and computer D all computers Observable 1 correctness of response Description 2 points for Option 1 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 9.6.3 Switches - Selective Forwarding 16 Which topology represents a collision-free environment?

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

Observable 1 correctness of response

Description 2 points for Option 3 0 points for any other option

Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

9.6.2 Ethernet - Using Switches

17

Refer to the exhibit. Communication for hosts X and Y is restricted to the local network. What is the reason for this? Host X is assigned a network address. Host Y is assigned a multicast address. Host X and host Y belong to different networks. The gateway addresses are broadcast addresses. Observable 1 correctness of response Description 2 points for Option 4 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 6.2.1 Types of Addresses in an IPv4 Network 18 Which option shows how a router will route packets to a remote network?

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

Observable 1 correctness of response

Description 2 points for Option 4 0 points for any other option

Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

5.3.4 A Route - The Path to a Network

19

Refer to the exhibit. What two facts can be determined about the exhibited topology? (Choose two.) A single broadcast domain is present Two logical address ranges are required. Three broadcast domains are shown. Four networks are needed. Five collision domains exist. Observable 1 correctness of response Description Option 1 and Option 5 are correct. 1 point for each correct option. 0 points if more options are selected than required. Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

10.1.1 Choosing the Appropriate LAN Device

20

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

Refer to the exhibit. Host B attempts to establish a TCP/IP session with host C. During this attempt, a frame was captured at the FastEthernet interface fa0/1 of the San Francisco router. The packet inside the captured frame has the source IP address 10.10.1.2, and the destination IP address is 10.31.1.20. What is the destination MAC address of the frame at the time of capture? 0060.7320.D632 0060.7320.D631 0040.8517.44C3 0009.B2E4.EE03 0010.C2B4.3421 Observable 1 correctness of response Description 2 points for Option 2 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

7.4.1 Follow Data Through an Internetwork

21

Refer to the exhibit. A router, whose table is shown, receives a packet that is destined for 192.168.1.4. How will router treat the packet? The packet will be dropped. The packet will be forwarded via FastEthernet 0/0. The packet will be forwarded to the destination host. The packet will be forwarded to the 192.168.1.3 next-hop address. Observable 1 correctness of response Description 2 points for Option 3 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

5.3.7 Packet Forwarding - Moving the Packet Toward its Destination

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

22

Refer to the exhibit. A technician is working on a network problem that requires verification of the router LAN interface. What address should be pinged from this host to confirm that the router interface is operational? 127.0.0.1 192.168.64.196 192.168.254.1 192.168.254.9 192.168.254.254 Observable 1 correctness of response Description 2 points for Option 3 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

11.3.4 Testing Gateway and Remote Connectivity

23

Refer to the exhibit. A network technician is trying to determine the correct IP address configuration for Host A. What is a valid configuration for Host A? IP address: 192.168.100.19; Subnet Mask: 255.255.255.248; Default Gateway: 192.16.1.2 IP address: 192.168.100.20; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.17 IP address: 192.168.100.21; Subnet Mask: 255.255.255.248; Default Gateway: 192.168.100.18 IP address: 192.168.100.22; Subnet Mask: 255.255.255.240; Default Gateway: 10.1.1.5 IP address: 192.168.100.30; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.1.1 IP address: 192.168.100.31; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.18 Observable 1 correctness of response Description 2 points for Option 2 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

6.3.3 Assigning Addresses to Other Devices

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

24

Refer to the exhibit. A user wants to access the Internet from the PC. A part of the running configuration of the router is shown. Which default gateway IP address should be configured at the PC to enable this access? 10.1.192.1 10.1.192.2 10.1.192.54 192.31.7.1 Observable 1 correctness of response Description 2 points for Option 1 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

11.3.4 Testing Gateway and Remote Connectivity

25

Refer to the exhibit. Which option correctly identifies the network address, range of host addresses, and the broadcast address for the network that contains host A?

Observable

Description 2 points for Option 3

Max Value

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

correctness of response

0 points for any other option

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 6.5.1 Basic subnetting 26 A network administrator subnets the network 192.168.1.0/24 into four subnets. Which option correctly addresses Router1 and host A into the second subnet created?

Observable 1 correctness of response

Description 2 points for Option 3 0 points for any other option

Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 6.5.1 Basic subnetting 27 Which subnet mask will allow 2040 hosts per subnet on the IP network 10.0.0.0? 255.255.0.0

255.255.254.0 255.255.252.0 255.255.248.0 255.255.240.0 255.255.255.128 Observable 1 correctness of response Description 2 points for Option 4 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 6.5.5 Calculating the Number of Hosts 28 An organization has been assigned network ID 10.10.128.0 and subnet mask 255.255.224.0. Which IP address range can be used for this organization? 10.10.128.0 to 10.10.160.255

10.10.128.0 to 10.10.159.255 10.10.128.0 to 10.10.192.255

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

10.10.128.0 to 10.10.0.159 10.10.128.0 to 10.10.159.0 Observable 1 correctness of response Description 2 points for Option 2 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 10.4.1 Calculating Addresses: Case 1 29 Which table accurately associates the RFC 1918 private IP addresses with the correct network mask?

Observable 1 correctness of response

Description 2 points for Option 3 0 points for any other option

Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 6.2.5 Public and Private Addresses 30 What is true regarding network layer addressing? (Choose three.) uses a flat structure

prevent broadcasts heirarchical uniquely identifies each host 48 bits in length contains a network portion Observable 1 correctness of response Description Option 3, Option 4, and Option 6 are correct. 1 point for each correct option. 0 points if more options are selected than required. Max Value 3

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 5.2.5 How Do We Separate Hosts Into Networks? - Hierarchical Addressing 31 A user sees the command prompt: Router(config-if)# . What task can be performed at this mode? Reload the device.

Perform basic tests. Configure individual interfaces.

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

Configure individual terminal lines. Observable 1 correctness of response Description 2 points for Option 3 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 11.1.7 IOS Configuration Modes 32 Which memory contents will change as a result of using the Router# erase startup-config command on a router? RAM

ROM flash NVRAM Observable 1 correctness of response Description 2 points for Option 4 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 11.2.3 Managing Configuration Files 33 Which exhibit shows the interface that is configured by the command, router(config)# interface serial 0/0/1?

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

Observable 1 correctness of response

Description 2 points for Option 5 0 points for any other option

Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 11.2.4 Configuring Interfaces 34 Two routers are connected via their serial ports in a lab environment. The routers are configured with valid IP addresses, but they cannot ping each other. The show interface serial0/0 command shows that the serial0/0 interface is up but the line protocol is down. What could be the cause of this problem? The no shutdown command has not been applied to the interfaces.

The clock rate command has not been entered on the DCE interface. The interface timers are not cleared. The FastEthernet interface is emulating a serial interface by assigning it a timing signal. Observable 1 correctness of response Description 2 points for Option 2 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 11.4.2 Capturing and Interpreting Trace Information 35 What is the Cisco IOS? system software for Cisco devices

Read Only Memory in Cisco devices non-volatile storage for device configurations an initial operating system that is used for boot functions Observable 1 correctness of response Description 2 points for Option 1 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

11.1.1 Cisco IOS

36

Refer to the exhibit. Which option shows the correct topology given the configuration of Router1?

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

Observable 1 correctness of response

Description 2 points for Option 1 0 points for any other option

Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

11.2.4 Configuring Interfaces

37

Refer to the exhibit. An administrator made several changes to the configuration of the router but did not accomplish the desired result. To undo the changes the reload command was used. What will happen if the administrator answers yes to the prompt? The changes will be lost and the configuration file in RAM will be loaded. The changes will be saved and the configuration file in RAM will be loaded. The changes will be lost and the configuration file in NVRAM will be loaded. The changes will be saved and the configuration file in NVRAM will be loaded. Observable 1 correctness of response Description 2 points for Option 4 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 11.2.3 Managing Configuration Files 38 Which statement is true about router hostnames? A hostname should be unique on each router.

A router hostname cannot contain capital letters. A router hostname is configured in privileged executive mode. A router hostname must be created before any other configurations can be added to the device. Observable 1 correctness of response Description 2 points for Option 1 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

11.2.1 Devices Need Names

39

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

Refer to the exhibit. A network technician has made several changes to R1 since the configuration has last been saved. The modified configuration did not produce the desired changes. The technician wants to store a backup copy of the saved configuration on a TFTP server before reloading. Which action will cause the unmodified data to be saved on the TFTP server?

Observable 1 correctness of response

Description 2 points for Option 2 0 points for any other option

Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

11.2.3 Managing Configuration Files

40

Refer to the exhibit. An employee wants to access the organization intranet from home. Which intermediary device should be used to connect the organization intranet to the Internet to enable this access? hub switch router

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

wireless access point Observable 1 correctness of response Description 2 points for Option 3 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 1.5.1 Where Is It All Going? 41 Which physical component is used to access and perform the initial configuration on a new unconfigured router?

Observable 1 correctness of response

Description 2 points for Option 2 0 points for any other option

Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

11.1.1 Cisco IOS

42

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

Refer to the exhibit. A PC is communicating with another PC on a remote network. The two networks are connected by three routers. Which action will help to identify the path between the hosts? Use the ipconfig command at the host. Use the ipconfig/all command at the destination. Use the tracert command at the host. Use the ping command at the destination. Observable 1 correctness of response Description 2 points for Option 3 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

6.6.4 Traceroute (tracert) - Testing the Path

43

Refer to the exhibit. RouterB is configured properly. The Ethernet interface Fa0/0 of RouterA is configured with the use of the commands that are shown. However, a ping from the Fa0/0 interface of RouterA to the Fa0/0 interface of RouterB is unsuccessful. What action should be taken on RouterA to solve this problem? Use the description command on the FastEthernet interface Fa0/0. Configure the clock rate of the FastEthernet interface Fa0/0. Use the no shutdown command on the FastEthernet interface Fa0/0. Reboot the router. Observable 1 correctness of response Description 2 points for Option 3 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

11.3.2 Testing the Interface Assignment

44

Refer to the exhibit. A PC is connected to a network. Which action will verify that the PC can communicate with its default gateway? Use the ping 127.0.0.1 command. Use the ipconfig command. Use the ipconfig/all command. Use the ping 10.0.0.254 command. Observable 1 correctness of response Description 2 points for Option 4 0 points for any other option Max Value 2

This item references content from the following areas:

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

CCNA Exploration: Network Fundamentals

6.6.2 Ping Gateway - Testing Connectivity to the Local LAN

45 How can ARP be used to help document the network? It can list each hop on the way to a destination host. It can show the average latency of hosts on the network. It can provide a list of physical addresses on the network. It can indicate which hosts are not responding to network traffic. Observable 1 correctness of response Description 2 points for Option 3 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

11.4.3 Learning About the Nodes on the Network

46

Refer to the exhibit. Host A is unable to reach host B on the remote network. A technician attempted to ping the local gateway and the ping was successful. To verify the host configuration, the technician issued the ipconfig command. What is the likely cause of the problem? The local NIC is incorrectly configured. The subnet mask on host A is incorrectly configured. The IP address on host A is incorrectly configured. The default gateway on host A is incorrectly configured. Observable 1 correctness of response Description 2 points for Option 4 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

11.3.5 Tracing and Interpreting Trace Results

47

Refer to the exhibit. A student has wired each end of a CAT 5e cable as shown. What is the result? (Choose two.) The cable is unusable and must be rewired.

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

The cable is suitable for use as a rollover cable. The cable is suitable for use as a Fast Ethernet crossover. The cable is suitable for use as a Gigabit Ethernet straight-through. The cable is suitable for use between two 100 Mbps Auto-MDIX capable switches. Observable 1 correctness of response Description Option 3 and Option 5 are correct. 1 point for each correct option. 0 points if more options are selected than required. Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l 10.2.2 Making LAN Connections 48 Which option correctly identifies the interface or interfaces used to connect the router to a CSU/DSU for WAN connectivity?

Observable 1 correctness of response

Description 2 points for Option 4 0 points for any other option

Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

10.2.3 Making WAN Connections

49

Refer to the exhibit. Which diagram depicts the path through the network that is represented in the output of the tracert command?

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

Observable 1 correctness of response

Description 2 points for Option 4 0 points for any other option

Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

11.4.2 Capturing and Interpreting Trace Information

50

Refer to the exhibit. The command that is shown was issued on a PC. What does the IP address 192.168.33.2 represent?

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//

Cisco Networking Academy

IP address of the host default gateway of the host IP address of the homepage for the host primary domain name server for the host IP address of the website resolver1.mooki.local Observable 1 correctness of response Description 2 points for Option 4 0 points for any other option Max Value 2

This item references content from the following areas: CCNA Exploration: Network Fundamentals
l

3.3.1 DNS Services and Protocol

Reset View
Showing 1 of 1 Prev Page: 1 Next

Close Window
All contents copyright 2001-2009 Cisco Systems, Inc. All rights reserved. Privacy Statement and Trademarks.

mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht

//