calipers come in brand new designs.

Each model is uniquely made with

new quality in innovations, function and precision. They are the ultimate market value you will find.
We are confident that our products will fully satisfy your demand and earn your trust.
Each of our brand new designed calipers is developed in Taiwan. Innovated design combines with
the workmanship of Swiss. 100% quality control assurance is carried out in our calibration
laboratory in Taiwan.
calipers are made with hardened stainless steel hardness HRC 48-52. All parts are
precision grinded and polished to ensure the requirements for absolute straightness, flatness,
parallels, and rigidity.
Each caliper is calibrated based on the measuring accuracy standards of ISO 3611, DIN 862 in
Germany, JIS B7507 in Japan and JCC (Jingstone Calibration Center) in Taiwan. English calibration
report is included with every caliper.
DIN 862 CALIPER ACCURACY STANDARDS JIS B7507 CALIPER ACCURACY STANDARDS
Measuring Scale minimum reading values Measuring Scale minimum reading values
Vernier and Dial Digital length(mm) 0.1 and 0.05mm 0.02 and 0.01mm
length(mm) 0.1 and 0.05mm 0.02mm 0.01mm 50 ±0.05 ±0.02
50 ＞50 to 100 ±0.06
20 20 ±0.03
100 ＞100 to 200 ±0.07
50
200
＞200 to 300 ±0.08
300 ±0.04
＞300 to 400 ±0.09
400 60 30 30
＞400 to 500 ±0.10
500 70 ±0.05
＞500 to 600 ±0.11
600 80
700 90
＞600 to 700 ±0.12
±0.06
800 100 ＞700 to 800 ±0.13
40 40
900 110 ＞800 to 900 ±0.14
±0.07
1000 120 ＞900 to 1000 ±0.15
1200 140 *Permissible errors of calipers UNIT：mm
50
1400 160
1600 180 ----
1800 200 60
2000 220
*MPE：Max Permissible Errors UNIT:um(0.001mm) Vernier Dial Digital

The all new designed calipers come in Vernier, dial, and digital displays. Models with measuring
range within 300mm are equipped with external, internal, depth and step measuring utilities.
Other special models come with special utilities.

INSIDE DEPTH
OUTSIDE STEP

E1

www.cmsmetrology.com.mx www.controlymedicion.com.mx
VERNIER CALIPER
BestVcal

Precision. unique. innovation.

E2
www.cmsmetrology.com.mx www.controlymedicion.com.mx
ŃŦŴŵŗŤŢŭ
ŗņœŏŊņœġńłōŊőņœ
őœņńŊŔŊŐŏġġġŖŏŊŒŖņġġġŊŏŏŐŗłŕŊŐŏ

internal jaws clamp screw

Step sliding scale groove design

ŗńĮĺĴıı

ŗńĮĺIJĶı
ŗńĮĺijıı

External jaws curved pusher laser engraved scales main scale depth rod

ŇņłŕŖœņ
4 measuring utilities: external, internal, depth, and steps.

Hardened stainless steel hardness HRC48-52 and close type

sliding scale structure design.
Solid structural design with precision machining, chrome plating
surface, laser engraved scale, guarantee wear resistance.
Ergonomic design cur ved pusher, external and internal jaws for
easy to use and safety.
Unique, innovative groove-design of main scale, for eliminating
dust and grease, reduce sliding friction resistance.

Model No. Measuring Range Graduation Accuracy (MPE)

VC-9150 0-150mm/6” 0.03mm/0.0010”
VC-9200 0-200mm/8” 0.02mm/0.001” 0.03mm/0.0010”
VC-9300 0-300mm/12” 0.04mm/0.0015”

5HPDUN濣9&:LWKRXWJURRYHGHVLJQ03(濣0D[3HUPLVVLEOH(UURUV

E3 CALIPER
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 Precision. Unique. Innovation.

TAIWAN DESIGN SWISS MODULE D-SHOCKPROOF

DIAL CALIPER
E4
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 ŔŸŪŴŴġŔŵźŭŦġŅŪŢŭġńŢŭŪűŦų
ŔʼnŐńŌőœŐŐŇ
0HWURORJ\6ZLVV6W\OH'LDO&DOLSHUXWLOL]HG6ZLVVVW\OHJHDUPRGXOHVHWVDQG
GRXEOHVKRFNSURRIGHVLJQ0DGHIURPKDUGHQHGVWDLQOHVVVWHHOKDUGQHVV
HRC48-52. It is a highly precise, highly accurate measuring tool.

$OOQHZXQLTXHO\GHVLJQGLDOEH]HODQGVFDOHSRLQWHUUHYROXWLRQPPJUDGXDWLRQ
with sharp and easy readings. Greatly reduced eye-fatigue and vision errors.

/DVHUHQJUDYHGVFDOHHQVXULQJHDV\UHDGLQJLWVGXUDELOLW\DQGZHDUWHDUUHVLVWDQFH
7KHVOLGLQJVFDOHPDNHVXVHRIHQFORVHGVWUXFWXUDOGHVLJQORZEDFNODVKPDNLQJVXUH
smooth slides and warp-resistance.

0HWURORJ\6ZLVV6W\OH&DOLSHUVDUHSHUIHFWIRUDQ\ZRUNVKRSVRUTXDOLW\FRQWURO
facilities. Each caliper comes with factor y warranty and cer tificates according to
*HUPDQ',1DQG-LQJVWRQH&DOLEUDWLRQ&HQWHU-&&VWDQGDUGLQ7DLZDQ

'&+
Chrome plating metal casing

S
UHYROXWLRQ mm

A B
Model No.
DC-9001H
DC-9002H
DC-9003H
Measuring Range
0-150mm
0-200mm
0-300mm
'&+1
:HLJKWUHGXFHGSODVWLFFDVLQJ
:LWKILQHDGMXVWPHQWUROOHU

Graduation

0.01mm
Accuracy (MPE)
0.02mm
0.03mm
0.04mm
Remark
'&
:LWKILQH
adjustment roller

Chrome-plated metal housing

DC-9001HT 0-150mm 0.02mm Chrome-plated metal housing.

DC-9002HT 0-200mm 0.01mm 0.03mm Tungsten Steel Measuring Jaw
DC-9003HT 0-300mm 0.04mm (inner & ext.)

DC-9001HN 0-150mm 0.02mm

Light-weight plastic housing.
DC-9002HN 0-200mm 0.01mm 0.03mm
With fine -adjustment roller.
DC-9003HN 0-300mm 0.04mm
DC-9500 0-500mm 0.02mm 0.05mm With fine- adjustment roller.

E5 CALIPER
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 DIGITAL CALIPERS

Precision. Unique. Innovation.

E6
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 ŅŪŨŪŵŢŭġńŢŭŪűŦų
ŗņōŐńŊŕŚġŔņœŊņŔ

ŅŪŨŪŵġťŪŴűŭŢźġůŰġŭŪŮŪŵġŪůťŶŤŵŪŰů
ŐűŵŪŤŢŭġŨŭŢŴŴġŮŦŢŴŶųŪůŨġŴźŴŵŦŮ

◆ DĞƚƌŽůŽŐLJsĞůŽĐŝƚLJ^ĞƌŝĞƐĚŝŐŝƚĂůĐĂůŝƉĞƌƐĨĞĂƚƵƌĞƐƚŚĞůĂƚĞƐƚƌĂƉŝĚͲŝŶĚƵĐƟŽŶƐĐĂŶĐŚŝƉĨŽƌǀĂůƵĞͲƌĞĂĚŝŶŐƐLJƐƚĞŵ͘
ƵƚŽŵĂƟĐĂůůLJŵĞŵŽƌŝnjĞŵĞĂƐƵƌĞŵĞŶƚǀĂůƵĞĂƚĂŶLJƟŵĞĂŶĚĂŶLJƉŽƐŝƟŽŶ͕ǁŚĞƚŚĞƌŝƚ ͛ƐƉŽǁĞƌŽŶŽƌƉŽǁĞƌŽī͘
dŚĞĚŝƐƉůĂLJĨƵŶĐƟŽŶƐŶŽƌŵĂůůLJƌĞŐĂƌĚůĞƐƐĨĂƐƚƐůŝĚŝŶŐ͘ƵƌĂďůĞ͕ƐƚĂďůĞ͕ůŽŶŐĞƌŽƉĞƌĂƟŽŶůŝĨĞ͘
◆ ŽŵƉŽƐŝƚĞKƉƟĐĂů'ůĂƐƐĂƉĂĐŝƟǀĞ^ĞŶƐŝŶŐZĂƐƚĞƌDĞĂƐƵƌŝŶŐ^LJƐƚĞŵǁŚŝĐŚŝƐĂƐƚĞƉͲƵƉĨƌŽŵƚŚĞƚƌĂĚŝƟŽŶĂů
ďƌĂƐƐƌĂƐƚĞƌŵĞĂƐƵƌŝŶŐƐĐĂůĞ͘dŚĞŶĞǁƐLJƐƚĞŵƉƌĞǀĞŶƚƐŵĂŐŶĞƟĐŝŶƚĞƌĨĞƌĞŶĐĞ͘sĂƌŝĂƟŽŶŽĨƚĞŵƉĞƌĂƚƵƌĞĚŽĞƐ
ŶŽƚŝŶŇƵĞŶƚƚŚĞŵĞĂƐƵƌŝŶŐĂĐĐƵƌĂĐLJ͕ĂůƐŽƚŚĞĚŝƐƉůĂLJƵŶŝƚĨƵŶĐƟŽŶŶŽƌŵĂůůLJŝŶŚƵŵŝĚĐŽŶĚŝƟŽŶƐ͘
◆ ,ŝŐŚƋƵĂůŝƚLJĞŶĐůŽƐĞĚƐůŝĚŝŶŐƐƚƌƵĐƚƵƌĞ͕ŵĂŝŶƐĐĂůĞŝƐŝŶƚĞŐƌĂƚĞĚ͕ŵĂĚĞŽĨŚĂƌĚĞŶĞĚƐƚĂŝŶůĞƐƐƐƚĞĞů͕ŚĂƌĚŶĞƐƐ,Z
ϰϴͲϱϮ͘WƌĞĐŝƐŝŽŶůĂƉƉŝŶŐŵĞĂƐƵƌŝŶŐĨĂĐĞ͕ĂĐĐƵƌĂĐLJŝƐĂĐĐŽƌĚŝŶŐƚŽ'ĞƌŵĂŶLJ/E͕:ĂƉĂŶ:/^͕/^KĂŶĚ:dĂŝǁĂŶ͘
◆ European styling ergonomic design curved pusher and thumb roller to assure the stability and comfort.
◆ >Zϰϰϭ͘ϱĂƩĞƌLJ͕ƉůĂƐƟĐĚŝƐƉůĂLJĐĂƐĞĂŶĚĨĂƐƚĞŶƐůŝĚĞƌƚLJƉĞďĂƩĞƌLJĐŽǀĞƌĨŽƌƐĂĨĞĂŶĚĞĂƐLJďĂƩĞƌLJ
ƌĞƉůĂĐĞŵĞŶƚĂƐǁĞůůĂƐĞŶƐƵƌŝŶŐƉƌŽƉĞƌĐŽŶƚĂĐƚǁŝƚŚĞůĞĐƚƌŝĐŝƚLJ͘
◆ ϭϬŵŵƐƵƉĞƌůĂƌŐĞĚŝƐƉůĂLJͬ^ŚĂƌƉĚŝƐƉůĂLJĂŶĚĞĂƐLJƚŽƌĞĂĚ͕ƌĞĚƵĐĞĞLJĞĨĂƟŐƵĞĂŶĚǀŝƐŝŽŶĞƌƌŽƌ͘

◆ ƵƩŽŶĨƵŶĐƟŽŶƐWKtZ：ϭ͘WŽǁĞƌͲŽŶĂƵƚŽŵĂƟĐĂůůLJďLJŵŽǀŝŶŐƚŚĞƐůŝĚĞƌ͕ŽƌŵĂŶƵĂůůLJďLJƉƌĞƐƐŝŶŐƚŚĞďƵƩŽŶ
Ϯ͘ĂƵƚŽƉŽǁĞƌĚŽǁŶĂŌĞƌŝĚůĞDDͬ/E͗DĞƚƌŝĐĂŶĚ/ŵƉĞƌŝĂůĐŽŶǀĞƌƐŝŽŶ
ZK：ƐĞƫŶŐnjĞƌŽĂƚĂŶLJƉŽƐŝƟŽŶ

ʼnŢųťŦůŦťġ œŰŭŭŦųġŢůťġ ŎŪųųŰųġŧŪůŪŴũġŧŪŭŮġ

ŴŵŢŪůŭŦŴŴġŴŵŦŦŭġ ŤŶųŷŦťġ ŨŭŢŴŴġųŢŴŵŦųġ
űųŦŤŪŴŪŰůġ űŶŴũŦų ŮŦŢŴŶųŪůŨġŴźŴŵŦŮ
ŭŢűűŪůŨ

ōœĵĵġţŢŵŵŦųźġŧŢŴŵŦůġ ĴĮŤŰŭŰųġŧŶůŤŵŪŰůġŬŦźŴġ
ŴŭŪťŦųġŵźűŦġţŢŵŵŦųźġŤŰŷŦų ŴŶűŦųġŭŢųŨŦġōńŅġťŪŴűŭŢź

Model No. Measuring Range Resolution Accuracy (MPE)

E-9001V 0-150mm/6” 0.02mm/0.001”
E-9001V 0-200mm/8” 0.01mm/0.0005” 0.03mm/0.0015”
E-9001V 0-300mm/12” 0.04mm/0.0015”

E7 CALIPER
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 ŅŪŨŪŵŢŭġńŢŭŪűŦų
őųŦŵŵźġŔņœŊņŔ ŐűŵŪŤŢŭġňŭŢŴŴġŎŦŢŴŶųŪůŨġŔźŴŵŦŮġŊőĶĵ

ʼnŦŢųŵŴ ŎŰŶŴŦ ŔŵŢųŴ

ɚ 0HWURORJ\3UHWW\3LQN&DOLSHU6SHFLDOGHVLJQZLWKDIHPLQLQHWRXFKLQWHQGHGWRFKHHUXSDQ\ZRUNVSDFH
Limited production/ great for collection or gifts.
ɚ 0HWURORJ\3UHWW\VHULHVGLJLWDOFDOLSHUIHDWXUHVWKHODWHVWUDSLGLQGXFWLRQVFDQFKLSIRUYDOXHUHDGLQJ
V\VWHP$XWRPDWLFDOO\PHPRUL]HPHDVXUHPHQWYDOXHDWDQ\WLPHDQGDQ\SRVLWLRQZKHWKHULWĬVSRZHURQ
RUSRZHURII7KHGLVSOD\IXQFWLRQVQRUPDOO\UHJDUGOHVVIDVWVOLGLQJ'XUDEOHVWDEOHORQJHURSHUDWLRQOLIH
ɚ &RPSRVLWH2SWLFDO*ODVV&DSDFLWLYH6HQVLQJ5DVWHU0HDVXULQJ6\VWHPZKLFKLVDVWHSXSIURPWKHWUDGLWLRQDO
EUDVVUDVWHUPHDVXULQJVFDOH1HZV\VWHPSUHYHQWVPDJQHWLFLQWHUIHUHQFH9DULDWLRQRIWHPSHUDWXUHGRHVQRW
influent the measuring accuracy, also the display unit function normally in humid conditions.
ɚ High quality enclosed sliding structure, main scale is integrated, made of hardened stainless steel,
KDUGQHVV+5&3UHFLVLRQODSSLQJPHDVXULQJIDFHDFFXUDF\LVDFFRUGLQJWR*HUPDQ\',1-DSDQ
-,6,QWHUQDWLRQDO,62DQG-&&7DLZDQ
ɚ (XURSHDQVW\OLQJHUJRQRPLFGHVLJQFXU YHGSXVKHUDQGWKXPEUROOHUWRHQVXUHWKHVWDELOLW\DQGFRPIRU W
ɚ &59OLWKLXPEDWWHU \HQHUJ\HIILFLHQWEDWWHU \OLIH\HDURURYHU
ɚ PPVXSHUODUJHGLVSOD\6KDUSGLVSOD\DQGHDV\WRUHDGUHGXFHH\HIDWLJXHDQGYLVLRQHUURU
ɚ Botton functions 00,1濣0HWULFDQG,PSHULDOFRQYHUVLRQưABS濣DEVROXWHDQGLQFUHPHQWYDOXH
ZERO濣VHWWLQJ]HURDWDQ\SRVLWLRQ212))濣PDQXDORQRIIVZLWFKDQGDXWRSRZHU

őŪůŬġŮŢŪůġŴŤŢŭŦġŢůťġűŪůŬġűŭŢŴŵŪŤġŤŢŴŦ

Model No. Type Measuring Range Resolution Accuracy (MPE)

E-9001PH Heart
E-9001PM Mouse 0-150mm/6” 0.01mm/0.0005” 0.03mm/0.0015”
E-9001PS Star

CALIPER E8
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 TAIWAN PATENT

CALIPER
EU INTERNATIONAL PATENT

E9 MORE
www.cmsmetrology.com.mx www.controlymedicion.com.mx
ŅŪŨŪŵŢŭġńŢŭŪűŦų ŐűŵŪŤŢŭġňŭŢŴŴġŎŦŢŴŶųŪůŨġŔźŴŵŦŮġŊőĶĵ
ŇœłńŕŊŐŏ ġ ŔņœŊņŔ
0HWURORJ\)UDFWLRQ6HULHVGLJLWDOFDOLSHUIHDWXUHVWKHODWHVW
rapid-induction scan chip for value-reading system. Automatically
PHPRUL]HPHDVXUHPHQWYDOXHDWDQ\WLPHDQGDQ\SRVLWLRQ

&RPSRVLWH2SWLFDO*ODVV&DSDFLWLYH6HQVLQJ5DVWHU0HDVXULQJ6\VWHP
ZKLFKLVDVWHSXSIURPWKHWUDGLWLRQDOEUDVVUDVWHUPHDVXULQJVFDOH
1HZV\VWHPSUHYHQWVPDJQHWLFLQWHUIHUHQFH9DULDWLRQRIWHPSHUDWXUH
does not influent the measuring accuracy, also the display unit
function normally in humid conditions.

ŇņłŕŖœņ

,3ZDWHUDQGGXVWSURWHFWLRQ,(&
)RUPLQRUKXPLGLW\DQGGXVW\HQYLURQPHQWV

Hardened Stainless Steel

Hardness HRC 48-52, including the fine
adjustment roller

IXQFWLRQDOEXWWRQV
0DQXDO2Q2IIVZLWFKDXWRSRZHUGRZQ

$%6,1&FRQYHUVLRQ00,1)FRQYHUVLRQ

9OLWKLXPEDWWHU \&5
RQH\HDUEDWWHU \OLIH

)DFWRU \ZDUUDQW\
-&&FDOLEUDWLRQFHU WLILFDWHLQFOXGHG

Model No. Measuring Range Resolution Accuracy (MPE)

E-9001tF 0-150mm/6” 0.02mm/0.001”
E-9002tF 0-200mm/8” 0.01mm/0.0005” 0.03mm/0.0015”
E-9003tF 0-300mm/12” 0.04mm/0.0015”

CALIPER E10
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 ŅŪŨŪŵŢŭġńŢŭŪűŦų
ŎŊńœŐġŔņœŊņŔ ŐűŵŪŤŢŭġňŭŢŴŴġŎŦŢŴŶųŪůŨġŔźŴŵŦŮġ ŊőĶĵ
0HWURORJ\0LFURQ6HULHVGLJLWDOFDOLSHUIHDWXUHVWKHODWHVWUDSLGLQGXFWLRQVFDQ
FKLSIRUYDOXHUHDGLQJV\VWHP$XWRPDWLFDOO\PHPRUL]HPHDVXUHPHQWYDOXHDW
any time and any position.
&RPSRVLWH2SWLFDO*ODVV&DSDFLWLYH6HQVLQJ5DVWHU0HDVXULQJ6\VWHP
ZKLFKLVDVWHSXSIURPWKHWUDGLWLRQDOEUDVVUDVWHUPHDVXULQJVFDOH
1HZV\VWHPSUHYHQWVPDJQHWLFLQWHUIHUHQFH9DULDWLRQRI
temperature does not influent the measuring accuracy, also
the display unit function normally in humid conditions.

PPVXSHUODUJH/&'GLVSOD\PP
high resolution, measuring accuracy
DFFRUGLQJWR',1-,6,62DQG-&&VWDQGDUGV

ŇņłŕŖœņ

,3ZDWHUDQGGXVWSURWHFWLRQ,(&
)RUPLQRUKXPLGLW\DQGGXVW\HQYLURQPHQWV

Hardened Stainless Steel

Hardness HRC 48-52, including fine
adjustment roller

IXQFWLRQDOEXWWRQV
0DQXDO2Q2IIVZLWFKDXWRSRZHUGRZQ

$%6,1&FRQYHUVLRQ
00,1FRQYHUVLRQ+2/'2Q2IIEXWWRQ

9OLWKLXPEDWWHU \&5
RQH\HDUEDWWHU \OLIH

)DFWRU \ZDUUDQW\

ıįııĶŮŮ -&&FDOLEUDWLRQFHU WLILFDWHLQFOXGHG

Model No. Measuring Range Resolution Accuracy (MPE)

E-9001tH 0-150mm/6” 0.020mm/0.001”
E-9002tH 0-200mm/8” 0.005mm/0.0005” 0.025mm/0.0015”
E-9003tH 0-300mm/12” 0.030mm/0.0015”

E11 CALIPER
www.cmsmetrology.com.mx www.controlymedicion.com.mx
ŅŪŨŪŵŢŭġńŢŭŪűŦų ŐűŵŪŤŢŭġňŭŢŴŴġŎŦŢŴŶųŪůŨġŔźŴŵŦŮġŊőĶĵ
łŃŔŐōŖŕņġŔņœŊņŔ
0HWURORJ\$EVROXWH6HULHVGLJLWDOFDOLSHUIHDWXUHVDEVROXWH
VHQVRUPHDVXULQJV\VWHPIRUIDVWDQGUHOLDEOHPHDVXUHPHQW
QRQHHGWRUHSHDWHGO\UHVHW]HURVHYHQDIWHUSRZHUGRZQRU
UHSODFLQJEDWWHU \WKHRULJLQDOGDWDVWD\VWKHVDPHDOVRQR
induction speed limit.

63&SRU WDOORZVGDWDLPSRU WWKURXJK86%

1RVRIWZDUHUHTXLUHG'DWDFDQEHWUDQVIHU
directly to Excel.

ŇņłŕŖœņ

,3ZDWHUDQGGXVWSURWHFWLRQ,(&
)RUPLQRUKXPLGLW\DQGGXVW\HQYLURQPHQWV

$EVROXWHVHQVRUPHDVXULQJV\VWHP

Ŕ
Limitless induction speed

Hardened Stainless Steel

Hardness HRC 48-52, including fine

Ń
adjustment roller

ġ
IXQFWLRQDOEXWWRQV
Slide to turn on, auto power down

łŔ
Ŷ Ŵ
ŭ $%6,1& 00,1FRQYHUVLRQ

ő ń ő 9OLWKLXPEDWWHU \&5
RQH\HDUEDWWHU \OLIH

)DFWRU \FHU WLILHG

-&&FDOLEUDWLRQFHU WLILFDWHLQFOXGHG

Model No. Measuring Range Resolution Accuracy (MPE)

E-9001A 0-150mm/6” 0.02mm/0.001”
E-9002A 0-200mm/8” 0.01mm/0.0005” 0.03mm/0.0015”
E-9003A 0-300mm/12” 0.04mm/0.0015”

KƉƟŽŶĂĐĐĞƐƐŽƌLJ͗^WĚĂƚĂŽƵƚƉƵƚĐĂďůĞ;KͲtͿ

CALIPER E12
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 20.01
20.01 ኱ྗৡ
኱ྗৡ 0.020
0.020 Ծҗࡋ
Ծҗࡋ 29
29 ӝ਱/όӝ਱
ӝ਱/όӝ਱
20.03
20.03
19.96
19.96
33
LCL
LCL
Range
Range
.OHኧ
.OHኧ
19.97
19.97
0.09
0.09
11
Total
Total
౲ኧ
౲ኧ
P%
P%
0.06
0.06
20.01
20.01
86.67%
86.67%
Ŕőń
on
on line chart
line chart
Number Value Conclusion
20.10
20.10
20.05
20.05 1 20.00 G
20.00
20.00 2 20.01 G
19.95
19.95 3 20.02 G
19.90
19.90
11 33 55 77 99 11
11 13
13 15
15 17
17 19
19 21
21 23
23 25
25 27
27 29
29 4 20.03 G
L>
L> Data
Data h>
h> Standard
Stand SinjeSinje
5 20.04 +
6 20.00 G
Histogram 7 20.01 G
40
40 8 20.00 G
Ѡ᡼໵ଭจ-SPCෳᡍൔ֋ 9 20.01 G
20
20
20.00 ഢຏ
10
10 10 19.99 G
จ ሺᏔࠠဦ
44 55
‫ׇ‬ဦ
22 33ᔸࡋ22 11 19.98 G
11ᔠᡍ঩
11 11 11 00

łŃŔ
໔ ྕࡋ
00
20.01 ኱ྗৡ 0.020 Ծҗࡋ 29 ӝ਱/όӝ਱ 12 19.99 G
20.03 19.96
19.96 19.98
LCL 19.98
19.97 20.00
20.00
Total 20.02
20.02
0.06 20.04
20.04 20.06
20.06
19.96 Range 0.09 ౲ኧ 20.01
13 19.97 G
3 .OHኧ
Data
Data
1
LL
LL
P%
UL
UL
86.67%
L
L 14 19.99 G
15 20.01 G
on line Chart
Run chart
20.10 16 20.00 G
15
15
20.05 17 20.00 G
10
10
20.00 18 20.01 G
19.95
55 19 20.03 G
19.90
00 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 20 20.01 G
19.9419.96
19.94 19.96 19.98
L> 19.98 20.0020.02
20.00
Data 20.02 20.04
h> 20.04 20.06
20.06
Stand 20.08
Sinje 20.08 21 20.04 +
22 20.05 +
Histogram 23 20.01 G
40 24 20.01 G
25 20.01 G
20 10 26 19.96 -
4 5 2 3 2
1 1 1 1 0 27 20.01 G
0
28 20.02 G
19.96 19.98 20.00 20.02 20.04 20.06
29 20.03 G
Data LL UL L
30 19.99 G

łţŴŰŭŶŵŦ
15
Run Chart
ġŅŪŨŪŵŢŭġńŢŭŪűŦų
E13
www.cmsmetrology.com.mx www.controlymedicion.com.mx
ŅŪŨŪŵŢŭġńŢŭŪűŦų ŊőķġĶ
ŘłŕņœőœŐŐŇ

0HWURORJ\,3:DWHUSURRI6HULHVGLJLWDOFDOLSHUIHDWXUHVFDSDFLWRU
VHQVRUPHDVXULQJV\VWHPIRUIDVWDQGUHOLDEOHPHDVXUHPHQWV
0DJQHWLFVWDWLFVKRFN EDWWHU \LQWHUIHUHQFHUHVLVWDQW

,3ZDWHUGXVWUHVLVWDQWRSHUDWLRQDOXQGHUOLTXLGVSODVK

'XDOEXWWRQGHVLJQHDV\WRXVHQRQHHGIRUUHSHDWUHVHWIDVW
GXUDEOHDQGGHSHQGDEOH

ŔŸŪŴŴġŔźŭŷŢŤġŴŤŢůġŤũŪű

ŇņłŕŖœņ

,3UDWLQJ,(&ZDWHU 0XOWLIXQFWLRQDOEXWWRQVPDQXDO

resistant/dust resistant On and Off/ auto power down

0DGHRIKDUGHQHGVWDLQOHVVVWHHO 9OLWKLXPEDWWHU \&5

hardness HRC48-52 hr. life time.

$%6,1&DQG00,1FRQYHUVLRQ )DFWRU \ZDUUDQW\-&&FDOLEUDWLRQ

cer tificate included

Model No. Measuring Range Resolution Accuracy (MPE)

E-9001St 0-150mm / 6”
0.01mm/0.0005” 0.03mm/0.0015”
E-9002St 0-200mm / 8”

CALIPER E14
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 IP67 Waterproof
Digital Caliper

SUBMARINE

E15

www.cmsmetrology.com.mx www.controlymedicion.com.mx
 0HWURORJ\,36XEPDULQH6HULHVGLJLWDOFDOLSHUIHDWXUHVHOHFWURPDJQHWLFVFDQ
FKLSIRUIDVWDQGUHOLDEOHPHDVXUHPHQW0DJQHWLFVWDWLFVKRFN EDWWHU \
interference resistant.

,3ZDWHUGXVWSURRI,(&FRPSOHWHZDWHUSURRIJUHDVHSURRI

operational in water

)HDWXUHVDEVROXWHVHQVRUPHDVXULQJV\VWHPIRUIDVWDQGUHOLDEOHPHDVXUHPHQW
QRQHHGWRUHSHDWHGO\UHVHW]HURVHYHQDIWHUSRZHUGRZQRUUHSODFLQJEDWWHU \
the original data stays the same, also no induction speed limit.

0XOWLIXQFWLRQDOEXWWRQVPDQXDO2QDQG2IIDXWRSRZHUGRZQ

ŅŪŨŪŵŢŭġńŢŭŪűŦų
ŔŖŃŎłœŊŏņ

Ŋőķġĸ
ŘłŕņœőœŐŐŇ
łţŴŰŭŶŵŦħņŭŦŤŵųŰŮŢŨůŦŵŪŤġŊůťŶŤŵŪŰůġŔŦůŴŰųŴ

ŇņłŕŖœņ
,3,(&FRPSOHWHZDWHUSURRI 0XOWLIXQFWLRQDOEXWWRQVPDQXDO
greaseproof, under normal water On and Off/ auto power down
SUHVVXUHDQGVXEPHUJHWLPH
$%6,1&DQG00,1FRQYHUVLRQ
$EVROXWHVHQVRUPHDVXULQJV\VWHP
Limitless induction speed 9OLWKLXPEDWWHU \&5
hr. life time.
0DGHRIKDUGHQHGVWDLQOHVVVWHHO
hardness HRC48-52 including fine )DFWRU \ZDUUDQW\-&&FDOLEUDWLRQ
adjust roller cer tificate included
Model No. Measuring Range Resolution Accuracy (MPE)
E-9001SS 0-150mm/6” 0.02mm/0.001”
E-9002SS 0-200mm/8” 0.01mm/0.0005” 0.03mm/0.0015”
E-9003SS 0-300mm/12” 0.04mm/0.0015”

CALIPER E16
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 CALIPER
Special Jaws Calipers, unique and modern design, solid structure
made of hardened stainless steel hardness HRC 48-52, measuring anvils and jaws are
precision grinded and polished.
This series of calipers are design to suit special requirements/ manufacturing accuracy is
based on ISO standards, in compliance to JCC.

GAGE

Resolution: 0.01mm/ 0.0005”

MM/INCH conversion button
Manual ON/OFF button
ZERO: Reset button
Unit: mm 1.5V, LR 44 lithium battery
E17

www.cmsmetrology.com.mx www.controlymedicion.com.mx
 (mm)
7
Code Range Accuracy L
1147-150 0-150mm/0-6" ±0.03mm 237
1147-200
Digital Caliper (Tungsten
0-200mm/0-8"
Steel) 287
±0.03mm
For measuring high density materials, measuring the external, internal, depth, and
1147-300
step of0-300mm/0-12" ±0.04mm
work pieces. Tungsten 403internal and external jaws, ensuring
steel on both
durability.
Tungsten carbide is much more wear-resistant and durable than hardened stainless
steel.

DATA EC-9001T
DIGITA
OUTPUT

Model No. Measuring Range Resolution Accuracy

EC-9001T 0-150mm/6” ±0.03mm
0.01mm
EC-9002T 0-200mm/8” 0.0005”
±0.03mm
Tungsten steel on both internal
EC-9003T 0-300mm/12” ±0.04mm
and external measuring jaws

Digital Caliper (Depth)

For depth, thickness, height, and step measurements

1142-150A

Resolution: 0.01mm/0.0005"
Buttons: on/off, zero, mm/inch
Automatic power off, move the digital
unit to turn on power
d
EC-9001DP
5

Battery CR2032 2
Data output
Made of stainless steel
Optional accessory: data output system
Model No. Measuring Range Resolution Base Length Accuracy
(mm)
EC-9001DP 0-150mm/6” 100mm ±0.03mm
Code EC-9002DPRange
0-200mm/8” Accuracy100mmL d
±0.03mm
EC-9003DP0-150mm/0-6"
1142-150A 0-300mm/12” ±0.03mm150mm
0.01mm 230 100
±0.04mm
EC-9004DP 0-500mm/20” 0.0005” 200mm ±0.05mm
D
1142-200A 0-200mm/0-8" ±0.03mm 100
280 ±0.06mm
EC-9005DP 0-800mm/30” 200mm
1142-300A
EC-9006DP0-300mm/0-12"
0-1000mm/40” ±0.04mm250mm 150
380 ±0.08mm

CALIPER E18
www.cmsmetrology.com.mx www.controlymedicion.com.mx
xtension base (optional)

Digital Caliper (Outside Groove)

6141 series
For measuring outside groove diameter, length, wall thickness of slots.

K DEPTH GAGE
EC-9000OG

Unit: mm
L

EC-9001OG
14.5

Model No. Measuring Range Resolution Jaw Length Anvil Dia Anvil Length Accuracy
EC-9000OG 0-150mm/6” 40mm T1mm 5mm ±0.03mm
EC-9001OG 0-150mm/6” 70mm Ɍ2mm 5mm ±0.03mm
0.01mm
EC-9002OG 0-200mm/8” 100mm Ɍ2.5mm 8mm ±0.04mm
0.0005”
EC-9003OG 0-300mm/12” 150mm Ɍ2.5mm 10mm ±0.04mm
EC-9004OG 0-500mm/20” 200mm Ɍ3mm 12mm ±0.05mm
Remark: EC-9000OG come with flat measuring anvils, all other models come with curved anvils.

E19 CALIPER
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 Digital Caliper (Inside Groove)
For measuring inside groove diameter, hole diameter, and distance of workpiece.

EC-9001IG

EC-9001IG1

Model No. Measuring Range Resolution Jaw Length Anvil Dia Anvil Length Accuracy
EC-9001IG 10-150mm/6” 30mm T1mm 2mm
EC-9001IG1 20-150mm/6” 30mm ʗ2mm 3mm
±0.03mm
EC-9001IG2 35-150mm/6” 60mm ʗ2mm 6mm
EC-9001IG3 50-150mm/6” 90mm ʗ3mm 9mm
EC-9002IG1 25-200mm/8” 40mm ʗ2mm 4mm
EC-9002IG2 40-200mm/8” 70mm ʗ3mm 7mm ±0.03mm
EC-9002IG3 60-200mm/8” 0.01mm/0.0005” 100mm ʗ3mm 10mm
EC-9003IG1 30-300mm/12” 50mm ʗ2mm 5mm
EC-9003IG2 50-300mm/12” 80mm ʗ3mm 8mm ±0.04mm
EC-9003IG3 60-300mm/12” 110mm ʗ3mm 12mm
EC-9004IG1 40-500mm/20” 90mm ʗ2mm 5mm
EC-9004IG2 60-500mm/20” 120mm ʗ3mm 10mm ±0.05mm
EC-9004IG3 80-500mm/20” 150mm ʗ3mm 16mm
Remark: EC-9001IG come with flat measuring anvil, all other models come with curved anvils.

CALIPER E20
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 Digital Caliper (Inside & Outside Interchangeable Anvil)
For measuring outside groove diameter, length, wall thickness of slots, inside
groove diameter, hole diameter, and distance of workpiece

EC-9001IG outside inside

Model No. Measuring Range Resolution Jaw Length Anvil Dia Anvil Length Accuracy
EC-9001IO 0-150mm/6” 40mm ±0.03mm
EC-9002IO 0-200mm/8” 50mm ±0.03mm
0.01mm/0.0005” Ɍ2mm 5mm
EC-9003IO 0-300mm/12” 60mm ±0.04mm
EC-9004IO 0-500mm/20” 100mm ±0.05mm
Remark: above measuring range is for external specs. For internal measurements,
measuring jaw and anvil dimension must be added.

inside outside

Remark: Measuring tip standard spec is M2.5-6g.

The interchangeable anvils with curved style and custom measuring anvils can be ordered.

E21 CALIPER
www.cmsmetrology.com.mx www.controlymedicion.com.mx
Digital Caliper (Offset)
The main scale measuring jaw is adjustable.
For measuring outside and inside step distances.

EC-9001OS

Model No. Measuring Range Resolution Accuracy

EC-9001OS 0-150mm/6” ±0.03mm
EC-9002OS 0-200mm/8” ±0.03mm
0.01mm/0.0005”
EC-9003OS 0-300mm/12” ±0.04mm
EC-9004OS 0-500mm/20” ±0.05mm

Digital Caliper (Tube)

For measuring thickness of the tube wall, and distance of datum point to hole.

EC-9001TB

Model No. Measuring Range Resolution Accuracy

EC-9001TB 0-150mm/6” ±0.03mm
EC-9002TB 0-200mm/8” 0.01mm/0.0005” ±0.03mm
EC-9003TB 0-300mm/12” ±0.04mm
Remark: Measuring rod standard diameter is 4mm, Custom spec and style can be special ordered.

CALIPER E22
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 Digital Caliper (Point)
For measuring tight spaces in slots.

EC-9001PT

Model No. Measuring Range Resolution Accuracy

EC-9001PT 0-150mm/6” ±0.03mm
EC-9002PT 0-200mm/8” 0.01mm/0.0005” ±0.03mm
EC-9003PT 0-300mm/12” ±0.04mm

Digital Caliper (Blade)

For measuring length or diameter of tight spaces.

EC-9001BL

Model No. Measuring Range Resolution Accuracy

EC-9001BL 0-150mm/6” ±0.03mm
EC-9002BL 0-200mm/8” 0.01mm/0.0005” ±0.03mm
EC-9003BL 0-300mm/12” ±0.04mm
Remark: the standard measuring jaw thickness is 0.75 mm/ can be special order down to 0.4mm

E23 CALIPER
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 Digital Caliper (Center Distance)
Main scale and the sliding scale measuring jaws are interchangeable.
For measuring center distance between two holes, and hole center to reference face.

EC-9001CD

Model No. Measuring Range Resolution Accuracy

EC-9001CD 5-150mm/6” ±0.03mm
EC-9002CD 5-200mm/8” ±0.03mm
EC-9003CD 5-300mm/12” 0.01mm/0.0005” ±0.04mm
EC-9004CD 5-500mm/20” ±0.05mm
EC-9005CD 10-1000mm/40” ±0.08mm

Optional Measuring Tip

EC-CD20
EC-CD10 (2 piece/pair) (2 piece/pair)

Maximum hole diameter: 10 mm Maximum hole diameter: 20 mm

Remark: Standard measuring rod diameter is 5mm,Custom rod specs and style can be special ordered.

CALIPER E24
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 Digital Caliper (Screw)
With interchangeable measuring jaws
For measuring head thickness of screws and length of threads.

EC-9001SC

Head thickness
Model No. Measuring Range Resolution Accuracy
EC-9001SC 0-150mm/6” ±0.03mm
EC-9002SC 0-200mm/8” 0.01mm/0.0005” ±0.03mm
EC-9003SC 0-300mm/12” ±0.04mm
Remark: Standard accessory exclude measuring jaws

Thread length
Optional measuring jaws

'LDPHWHUIRUƅPP 'LDPHWHUIRUƅPP
Size tolerance: ±0.003mm Size tolerance: ±0.003mm
Material: hardened alloy steel Material: hardened alloy steel
Model Number: EC-SC1 Model Number: EC-SC2

Remark: Standard measuring jaw thickness: 4mm

E25 CALIPER
www.cmsmetrology.com.mx www.controlymedicion.com.mx
Digital Caliper (Outside Arc Radius)
For measuring external arc radius and diameter of semi-spherical and spherical
workpiece.

EC-9001OR

Model No. Measuring Range Resolution Accuracy

EC-9001OR R3-150mm/6” ±0.03mm
0.01mm/0.0005”
EC-9002OR R3-200mm/8” ±0.03mm

Digital Caliper (Disc)

For measuring thickness of sheets, paper, aluminum, plastic, metal, and gear teeth.

EC-9001DS

Model No. Measuring Range Resolution Jaw Length Disc Dia. Accuracy
EC-9001DS 0-150mm/6” 50mm Ɍ20mm ±0.03mm
EC-9002DS 0-200mm/8” 80mm Ɍ30mm ±0.03mm
0.01mm/0.0005”
EC-9003DS 0-300mm/12” 120mm Ɍ50mm ±0.04mm
EC-9004DS 0-500mm/20” 150mm Ɍ50mm ±0.05mm
Remark: disc thickness 2mm

CALIPER E26
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 Digital Caliper (Groove Width)
For measuring width, distance of internal grooves and distance from groove to
reference face.

EC-9001GW

Model No. Measuring Range Resolution Accuracy

EC-9001GW 3-150mm/6” ±0.03mm
EC-9002GW 3-200mm/8” 0.01mm/0.0005” ±0.03mm
EC-9003GW 4-300mm/12” ±0.04mm
Remark: Main beam width : 17 mm, measuring jaw total width 13xL23mm,
jaw width 3mm, and depth 4mm

Caliper (Gear Tooth)

For measures gear tooth thickness on the primary diameter.

Gear Tooth Caliper (Vernier) Gear Tooth Caliper (Digital)

GC-9000 GC-90001E

Model No. Measuring Range GraduaƟon Accuracy Model No. Measuring Range ResoluƟon Accuracy
GC-9000 M1-26 0.02mm ±0.02mm GC-9001E M1-25 ±0.02mm
0.01mm/0.0005”
GC-9002E M5-50 ±0.03mm

E27 CALIPER
www.cmsmetrology.com.mx www.controlymedicion.com.mx
Digital Caliper (Mini)

EC-9075S

Model No. Measuring Range ResoluƟon Accuracy (MPE)

EC-9075S 0-75mm / 3”
0.01mm/0.0005” 0.03mm/0.0015”
EC-9100S 0-100mm / 4”

Vernier Caliper (Parallel Scribing)

For workpiece dimension scribing and measuring tube thickness.

VC-9200S

Model No. Measuring Range GraduaƟon Accuracy

VC-9200S 0-200mm/8” 0.1mm/1/128” ±0.1mm
Remark: with Ø 2mm interchangeable tungsten scribing pin

Caliper Depth Base

Suitable for calipers within the range of 0 to 300mm. For support of measuring
depths.

Model No. Measuring Face Scale Width Material

CD-BASE 80*7.5mm 17mm Stainless Steel

CALIPER E28
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 CALIPER
Large jaw calipers for better structure integrity, sturdiness.
Every style come with fine adjustment, for easy to use. Made from stainless steel
hardness HRC48-52.

Our large jaws calipers are for measuring mid-size to large-size items. Measuring
external diameter, internal diameter, length and distance. It’s simple, fast and
reliable. All calipers are calibrated according to ISO and JCC (Jingstone
Calibration Center) standards.

Double Outside Jaw

Double inside Jaw

Single Long Jaw

Resolution :0.01mm/0.0005”
MM/INCH: Metric and Imperial system conversion
OFF/ON: manual switch On and Off
ZERO: Reset zero at any positions
ABS: Absolute and increment value conversion
PRE+/-: Increase or decrease size setting

E29
www.cmsmetrology.com.mx www.controlymedicion.com.mx
Digital Caliper (Standard Jaw)
For measuring mid-size workpiece external, internal, step, length and distance.

Blade type inside measuring jaws

Standard type outside measuring jaws

EC-9040SJ

Model No. Measuring Range Resolution Jaw Length Accuracy

EC-9040SJ 0-400mm/16” 100mm ±0.04mm
EC-9050SJ 0-500mm/20” 100mm ±0.05mm
EC-9060SJ 0-600mm/24” 0.01mm/0.0005” 100mm ±0.05mm
EC-9080SJ 0-800mm/32” 125mm ±0.06mm
EC-9100SJ 0-1000mm/40” 150mm ±0.08mm

Digital Caliper (Single Long Jaw)

For measuring small, mid, large size workpiece, external internal, step, length
and distance.
Long type outside measuring jaws

Radius type inside measuring jaws

EC-9050SL
Model No. Measuring Range Resolution Jaw Length Accuracy
EC-9020SL 0-200mm/8” 100mm ±0.03mm
EC-9030SL 0-300mm/12” 150mm ±0.04mm
EC-9040SL 0-400mm/16” 200mm ±0.04mm
EC-9050SL 0-500mm/20” 250mm ±0.05mm
EC-9060SL 0-600mm/24” 250mm ±0.05mm
EC-9080SL 0-800mm/32” 0.01mm/0.0005” 250mm ±0.06mm
EC-9100SL 0-1000mm/40” ±0.08mm
EC-9150SL 0-1500mm/60” ±0.10mm
EC-9200SL 0-2000mm/80” 300mm ±0.12mm
EC-9250SL 0-2500mm/100” ±0.15mm
EC-9300SL 0-3000mm/120” ±0.20mm

CALIPER E30
www.cmsmetrology.com.mx www.controlymedicion.com.mx
 Digital Caliper (Double Inside Jaw)
For measuring mid-size workpiece external, internal, step, length and distance.

Blade type inside measuring jaws

Radius type inside measuring jaws

EC-9060DI

Model No. Measuring Range Resolution Jaw Length Accuracy

EC-9040DI 0-400mm/16” 125mm ±0.04mm
EC-9050DI 0-500mm/20” 150mm ±0.05mm
EC-9060DI 0-600mm/24” 0.01mm/0.0005” 150mm ±0.05mm
EC-9080DI 0-800mm/32” 150mm ±0.06mm
EC-9100DI 0-1000mm/40” 200mm ±0.08mm

Digital Caliper (Double Outside Jaw)

For measuring small, mid, large size workpiece, external internal, step, length
and distance.

Blade type outside measuring jaws

Radius type inside measuring jaws

EC-9040DO

Model No. Measuring Range Resolution Jaw Length Accuracy

EC-9020DO 0-200mm/8” 75mm ±0.03mm
EC-9030DO 0-300mm/12” 100mm ±0.04mm
EC-9040DO 0-400mm/16” 150mm ±0.04mm
EC-9050DO 0-500mm/20” 200mm ±0.05mm
EC-9060DO 0-600mm/24” 200mm ±0.05mm
EC-9080DO 0-800mm/32” 0.01mm/0.0005” 200mm ±0.06mm
EC-9100DO 0-1000mm/40” ±0.08mm
EC-9150DO 0-1500mm/60” ±0.10mm
EC-9200DO 0-2000mm/80” 250mm ±0.12mm
EC-9250DO 0-2500mm/100” ±0.15mm
EC-9300DO 0-3000mm/120” ±0.20mm

E31 CALIPER
www.cmsmetrology.com.mx www.controlymedicion.com.mx
Digital Scale (Horizontal)
Can be installed on horizontal axis machine table, for measuring moving distance
and position.

ES-9040H

H type V type

Digital Scale (Vertical)

Can be installed on vertical axis machine table, for measuring
moving distance and position.
Model No. Model No. Measuring Range Accuracy
(Horizontal) (Vertical) (mm) (mm)
ES-9010H ES-9010V 100 ±0.02
ES-9015H ES-9015V 150 ±0.02
ES-9020H ES-9020V 200 ±0.03
ES-9030H ES-9030V 300 ±0.04
ES-9040H ES-9040V 400 ±0.04
ES-9050H ES-9050V 500 ±0.05
ES-9060H ES-9060V 600 ±0.05
ES-9070H ES-9070V 700 ±0.06
ES-9040V
ES-9080H ES-9080V 800 ±0.06
ES-9100H ES-9100V 1000 ±0.08
ES-9150H ES-9150V 1500 ±0.10
ES-9200H ES-9200V 2000 ±0.12

CALIPER E32
www.cmsmetrology.com.mx www.controlymedicion.com.mx