Scribd
Upload
216 views

Epoxy Paint Application Method Statement Procedure - Safe Work Method of Statement

The document provides instructions for surface preparation and application of an epoxy flooring system. It describes cleaning the concrete substrate using encapsulated abrasive blasting or other methods. It then details filling cracks and holes with floor putty, applying a primer coat of epoxy sealer, allowing it to cure, and applying two coats of epoxy flooring according to technical data sheets while ensuring proper mixing and thinning. Proper application, curing times and re-priming of porous surfaces as needed are emphasized.

Uploaded by

ak technicalservicesest
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
216 views

Epoxy Paint Application Method Statement Procedure - Safe Work Method of Statement

The document provides instructions for surface preparation and application of an epoxy flooring system. It describes cleaning the concrete substrate using encapsulated abrasive blasting or other methods. It then details filling cracks and holes with floor putty, applying a primer coat of epoxy sealer, allowing it to cure, and applying two coats of epoxy flooring according to technical data sheets while ensuring proper mixing and thinning. Proper application, curing times and re-priming of porous surfaces as needed are emphasized.

Uploaded by

ak technicalservicesest
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Recent

Publications
HVAC Duct
Leakage Testing
Procedure
Formwork
Shuttering Gartner Infrastructure

Installation
Method of Trends
Statement Equinix
Installation of
HVAC VCD Fire
Smoke Dampers Relevant entities which might require
and Accessories protection include any such works in the
Safe Work vicinity of the area of work or on the
Method Of service access or discharge path. The
Statement For construction team will ensure that any such
Dewatering
Work requirements are documented.

Risk Surface Preparation


Assessment for
Drainage Pipes
Installation

Popular The concrete substrate must be dry, sound,


Categories clean, dry and free from dust, oil, grease
 Civil Method and laitance and other contaminants.
Statements (77)
Molding compounds and release agents
 Electrical
Method must be removed from the surface.
Statements
(43) Substrate to be cleaned using encapsulated
 Fire Fighting abrasive blasting method, diamond
Systems (17) grinding, high pressure water jetting or
acid etching.

 HVAC Touch Up Floor Putty (for repair)
Method
Statements Using floor putty fill in blow holes which is
(43)
apparent in the substrate. All cracks should
 Occupational
by ground out back to the sound substrate
Health and
Safety (22) using a suitable tool and after thorough
cleaning to remove all dust and other
 Oil & Gas
Systems (11) impurities followed by filling using floor
 Plumbing
putty.
Method
Statements The excessive floor putty should remove
(36) ensuring that it falls level with the
 Technical substrate. Leave to cure/dry for 24hrs prior
Guides (31) to applying the epoxy paint.
 Testing &
Commissioning Application of Primer Coat
(59)
After the surface preparation is complete
all dust should be removed by vacuum

Popular ensuring that all dust is removed from the

Tags substrate.

AV System block Thoroughly mix the base and curing agent


work method of Chemiguard Epoxy Sealer in accordance
statement block
work procedure with the product technical data sheet using
CCTV ceramic a mechanical stirrer for 2 to 3 minutes.
floor tiles Clean
Agent System Chemiguard epoxy sealer can be thinned
Commissioning up to a maximum of 50% using Epoxy
COMMISSIONING
PROCEDURE Thinner. Leave to stand (induction time) for
Dampers 10 minutes before applying to the
Demolition Works substrate. Apply Chemiguard Epoxy Sealer
Drainage piping
Electric Water uniformly by using spray, roller or brush to
Heaters achieve the required dry film thickness.
excavation safe Leave to cure/dry for 8hrs prior to applying
work Fire
Dampers Fire next coat.
Fighting System
Fire Suppression The primer must be tack free before top
System HVAC coating. If pin holes or porosities are
Ductwork HVAC evident after initial cure of primer, re- 
Method
priming may be necessary especially on
p g y y p y
Statement very porous concrete.
Installation
Installation Application of First Coat of Epoxy
Method
Statement Flooring
installation
Procedure Thoroughly mix the base and catalyst
Lightning separately, then mixed together thoroughly
Protection in accordance with the product technical
System Method
Of Statement data sheet using a mechanical stirrer for at
method least 6 minutes.
statement
Method Chemiguard Epoxy Flooring can be thinned
Statement For
Testing & up to maximum of 15% using Epoxy
Commissioning Thinner. Apply first coat of Chemiguard
Precommissioning Epoxy Flooring uniformly by using spray,
Precommissioning
& Commissioning roller or brush to give a uniform film
Safe Method of thickness as required. Leave to cure/dry
Statement Safe 12hrs prior to applying final coat. Apply
Method final coat of Chemical Epoxy Flooring as
Statement safe
work for mentioned above. Allow to dry fully.
excavation safe
work method of  
statement Safe
Work Method
Statement
Sanitary Wares
SMDB's
Specifications
swimming pool
civil works SWMS
Testing &
Commissioning
Testing &
Commissioning
Method
Statement
Testing and
Commissioning
Tower Crane
Foundation UPS
System UPS Previous Next
Testing
Procedure
Variable 
Frequency Drives

You might also like