Scribd
Upload
83 views

Introduction To Matlab

This document provides an introduction to MATLAB and outlines objectives and experiments for a signals and systems laboratory. The objectives are to: 1) Understand basic MATLAB functions like creating variables, performing calculations, and visualizing data. 2) Gain experience with MATLAB tools like computing convolution, creating low-pass filters, and applying filters to remove noise from voice and ECG signals. The experiments involve using convolution to combine input sequences, adding noise to a voice signal, and using low-pass filters to eliminate high frequency noise.

Uploaded by

msm158
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
83 views

Introduction To Matlab

This document provides an introduction to MATLAB and outlines objectives and experiments for a signals and systems laboratory. The objectives are to: 1) Understand basic MATLAB functions like creating variables, performing calculations, and visualizing data. 2) Gain experience with MATLAB tools like computing convolution, creating low-pass filters, and applying filters to remove noise from voice and ECG signals. The experiments involve using convolution to combine input sequences, adding noise to a voice signal, and using low-pass filters to eliminate high frequency noise.

Uploaded by

msm158
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SIGNALS AND SYSTEMS LABORATORY 1: Introduction to Matlab INTRODUCTION In this lab, you will learn the basic and

intermediate functions of MATLAB and apply them to the theory of Convolution and Fourier Transforms. MATLAB is a high-level language and interactive environment that enables you to perform computationally intensive tasks faster than with traditional programming languages. Our objectives in this lab are to 1. Understand MATLAB We will be using the tutorial provided by Mathworks. The following website will provide the tutorial material. http://www.mathworks.com/academia/student_center/tutorials a. Creating Variable in Matlab b. Performing Calculation c. Visualizing Data d. Creating Scripts with Matlab 2. Gain Experience with MATLAB tools a. Convolution i. Write a convolution program ii. Use CONV b. Low-pass filter i. Voice signal ii. ECG signal

Page 1 of 3

SIGNALS AND SYSTEMS LABORATORY 1: Introduction to Matlab Gain Experience with MATLAB tools

Assignments will be collected in Lab #2. Work in group is allowed.

Experiment #1:

Linear Convolution

Given a pair of sequences, use discrete convolution to find the response to the input x[n] of the linear time-invariant system with impulse response h[n]. x[n]= square wave with amplitude 1 y[n]= triangle wave with amplitude 2 i. Use PLOT command to plot the input and impulse response ii. Compute the convolution by hand, use MATLAB to plot the results iii. Write a MATLAB function to compute the convolution of the two finite-length sequences and plot the results. For length N input vector x, the DFT is a length N vector X, with elements N X(k) = sum x(n)*exp(-j*2*pi*(k-1)*(n-1)/N), 1 <= k <= N. n=1

iv. Use CONV command to verify the results from b).

Experiment #2:

Low-pass Filters

Part 1: In this section of the tutorial, you will create a signal with added high frequency noise. Later in the tutorial, you will use a low-pass filter to eliminate high frequency noise.

1. Type load mtlb 2. You can hear a voice say "MATLAB." This is the signal to which you will add noise soundsc(mtlb,Fs) 3. Create a noise signal
Page 2 of 3

4. 5.

6. 7.

noise = cos(2*pi*3*Fs/8*(0:length(mtlb)-1)/Fs)'; (You can hear the noise signal by typing soundsc(noise,Fs)) (You can also use random function to introduce noise) Add the noise to the original signal u = mtlb + noise; Scale the signal with noise u = u/max(abs(u)); (You scale the signal to try to avoid overflows later on. You can hear the scaled signal with noise by typing soundsc(u,Fs)) Display the frequency spectrum using FFT (experiment 2) View the scaled signal with noise specgram(u,256,Fs);colorbar (In the spectrogram, you can see the noise signal as a horizontal line at about 2800 Hz, which is equal to 3*Fs/8)

8. Use low-pass filters to eliminate high frequency b = ones(1,10)/10; % 10 point averaging filter fy = filtfilt(b,1,x); % Noncausal filtering fyy = filter(b,1,x); % Normal filtering 9. Use FFT to plot the power spectrum of the filter signal and compare it to both, the original and the corrupted signals. Part 2: Real World Practical Application In this section of the tutorial, you will be provided an ECG ( Electrocardiogram) signal with noise. Your task is to create a matlab program to determine the frequency of the noise and eliminate the noise signal.

Page 3 of 3

You might also like