DISTRIBUTED VALVES

DEMCO® Butterfly Valves

®
DEMCO
 DISTRIBUTED VALVES

TABLE OF CONTENTS

DEMCO BUTTERFLY VALVES

Features and Benefits 1&2
Styles and Accessories 3&4

PRODUCT SPECIFICATIONS
How to Order Valves 5, 6 & 7
Base Numbers and Weights 8
Component Parts List 9 & 10
Dimensional Data (Valves) 11, 12, 13, 14, 15 & 16

HOW TO ORDER
AND TECHNICAL INFORMATION
Handles 17
Worm Gear Operators 18 & 19
DR Piston Actuators 20, 21 22 & 23
Stem Extensions, Tees and Adapters 24
General Technical Information 25, 26, 27, 28 & 29
Standard Material Data 30

MATERIAL SELECTION GUIDE 31, 32, 33 & 34

TRADEMARK INFORMATION 35

® CT-DEM-NE/NF/NEI
DEMCO 04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES FEATURES AND BENEFITS

Acclaimed as the most durable of Engineered for long-term, Bi-directional sealing
all resilient-seated butterfly valves maintenance-free performance, This valve provides bi-directional
in the industry, this valve excels in DEMCO butterfly valves are commonly sealing at full rated pressure with
a wide variety of applications. selected for a variety of applications identical flow from either direction.
spanning a wide range of industries:
Cast in both wafer and tapped-lug Integral flange seal
patterns in a wide variety of material • Chemical and petrochemical
Molded into the edge of the seat is
choices, DEMCO butterfly valves • Agriculture an integral flange seal which
feature a one-piece body for minimum • Oil and gas drilling and production accommodates ASME weld neck,
weight and maximum strength. The slip-on, threaded and socket flanges
unique stem hole design in the disc • Food and beverage
as well as “stub end” type C flanges.
ensures a dry stem journal and the • Water and waste water
hard-backed seat allows ease of • Cooling towers (HVAC) ASME Class 150 rating
installation, reliable operation, and is Body rating is ASME Class 150
• Power
field-replaceable without special tools. (285 psi non-shock).
DEMCO butterfly valves are available • Mining and materials Wafer body diameters are designed
in sizes 2 in. through 36 in. • Dry bulk handling to self-center in ASME Class 150
(50 mm through 900 mm). flange patterns.
• Marine and government

Flatted “double D” upper stem

Large flange top for ease of power

automation (full line of actuation
and accessories offered)

Bronze bearings Positive stem retention for

blowout proof stems

MSS SP-25 marking is standard

Triple stem seal

High flow disc

Positively oriented disc

Hard-backed cartridge seat

Wafer style shown One piece body

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 1
 DISTRIBUTED VALVES

BUTTERFLY VALVES FEATURES AND BENEFITS

Multiple pressure ratings A Dry stem journal eliminates C Positively oriented disc
Three drop tight pressure ratings are potential for leakage Proper orientation of the stem/disc
offered for 2 in. to 12 in. (50 mm to The DEMCO disc is uniquely designed connection is assured by the
300 mm) sizes. with a continuous annular raised land rectangular drive. In 2 in. through
The standard shut off pressure rating around the stem hole and disc edge 24 in. (50 mm through 600 mm)
is 200 psi, but 285 and 50 psi shut off which presses into the seat flat at every size valves, the disc is permitted to
ratings are also available and where angular position. The resilient seat float on the stem to perfectly
drop tight closure is not required and presses back with a higher specific center in the valve seat. This design
minimal torque is desired, a throttling force than the line pressure, preventing enhances drop tight sealing and
rated valve is available. leakage to the stem. In addition, two prolongs service life.
Both the 50 psi and throttling ratings O-ring ribs are provided in the seat
allow for smaller actuators, which can
D End-of-line service
stem bore creating a triple stem seal.
significantly reduce overall installation In competitive stem seal designs with Lug body valves may be used in
cost in automated applications. boot seats, a seal is accomplished by end-of-line service, with downstream
The 14 in. to 36 in. (350 mm to an interference “squeezing” on the piping removed. (Only weld neck or
900 mm) size valves are available in stem or an O-ring in the stem journal. socket flanges can be used for this
150 and 50 psi drop tight shut off The potential for leakage behind the service). Since upstream pressure is
ratings as well as throttling. seat is high for this competitive design. excluded between the flange and
As the disc wipes the seat, elongation the seat face by the exclusive
of the stem seal area allows leakage DEMCO flange seal design, there is
to collect behind the seat. This no effective force to slide the seat
condition is eliminated by DEMCO’s downstream.
dry stem journal and hard-backed seat. DEMCO 2 in. through 12 in. (50 mm
through 300 mm) Lug Butterfly
B Hard-backed cartridge seat Valves are suitable for liquid service
The DEMCO cartridge seat is up to 200 psi with downstream
constructed by permanently bonding piping removed (150 psi 14 in.
a resilient elastomer to a rigid backing through 36 in.
ring. In addition to superior sealing (350 mm through 900 mm)).
A integrity, this design; 1) makes valve Lug body valves are recommended
installation easier because no special for isolation of pumps, control
precautions are required for disc devices or other system components
position. This is especially which may need to be removed for
Hard-backed
advantageous when installing valves repair or replacement.
seat
with fail closed actuators; 2) eliminates Lug valves are also suitable for
high torque and premature failure installation at points from which
caused by elastomer distortion as piping expansion may proceed.
found in other non-rigid seat designs; Such valves are normally blanked
3) simplifies seat replacement because with blind flanges, to protect the
it is slip fitted into the body, with no exposed seats until new piping is
need for special tools. attached.

B
SPECIFICATIONS Pressure rating
Sizes 2 in. through 12 in. (50 mm through 300 mm):
Disc 0 (Throttling), 50, 200 and 285 psi.
2 in. through 36 in. (50 mm through 2 in. through 10 in. (50 mm through 250 mm)
900 mm) NEI-T: 150 psi 14 in. through 36 in. (350 mm
Body type and style designations through 900 mm): 0, 50 and 150 psi.
Long neck NE-C and NF-C: Operating Temperatures
2 in. through 36 in. (50 mm through -30ºF to 300ºF (-34ºC to 204ºC) depending on seat
C Stem 900 mm), wafer / lug, 36 in. (900 mm). material selection and application (see page 30)
Short neck NE-I, and NE-I Sanitary: Standard Material Options
2 in. through 12 in. (50 mm through
300 mm) wafer / lug. Bodies: Iron, steel, stainless steel and bronze
NE-IT Teflon: 2 in. through 10 in. Discs: Nickel plated ductile iron, bronze and
(50 mm through 250 mm) wafer / lug. stainless steel
NE-D: 2 in. through 12 in. (50 mm Stems: 416 and 316 stainless steel
through 300 mm) wafer. Seats: Buna N, EPT, Viton, Neoprene
Marine: 2 in. through 24 in. *Many more options available (see how to order,
(50 mm through 600 mm) wafer / lug. pages 5, 6, 7 and 30 or consult factory).
Upstream Disc
D

2 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES STYLES AND ACCESSORIES

This versatile valve comes in a variety of styles to suit an even wider Series NE-I Sanitary
range of applications. In addition, a variety of quality accessories are Sizes 2 in. through 12 in. (50 mm through
available to further enhance its suitability to the application. 300 mm), it is similar to our Series NE-I valve,
but is exclusively designed to meet the
rigorous requirements of sanitary service in
Series NE-C the food and beverage industry. The body is
Sizes 2 in. through 12 in. (50 mm available in bronze, stainless steel, aluminum
through 300 mm), this series is a or electroless nickel-coated ductile iron.
general purpose valve with neck FDA - approved materials are used for all
length designed to provide full wetted parts. Handle parts are bronze and
clearance of the valve top over stainless steel, permitting caustic washdown.
two inches of insulation on Other benefits:
ASME Class 150 pipe flanges;
• DEMCO dry journal stem seal system gives
available in both wafer and lug
absolute assurance of sanitary butterfly
styles.
valve construction.
• Drilled passageways, a design originated by
Series NE-I DEMCO, vent the entire interior of the disc to
Sizes 2 in. through 12 in. (50 mm atmosphere. No closed chamber is provided
through 300 mm), it is suited for a for the culture of undesirable organisms.
wide range of applications in many • Discs are produced from investment castings,
industries, including food and smooth and non-porous. Stem bosses are
beverage utilities and process flow minimized for increased flow.
lines. This short neck design is • The projecting inner surface of the resilient
offered in a wide variety of body seat contacts and is compressed by the
materials. The valves are designed mating flange to form a smooth and
for installation between uninterrupted flow way.
ASME Class 125/150 flanges. This positive seal between the innermost
contact of the seat and flange ensure aseptic
conditions after a piping flush.
Series NE-D Valve
Sizes 2 in. through 12 in.
Sanitary Features
(50 mm through 300 mm), it is
a short neck valve with body Stem Seal
notches to fit popular lightweight
Vented
flange patterns, making it ideal Design
for bulk material handling and
the transportation industry. High Flow
Valves will also center in Discs
ASME Class 125/150 flanges.

Trap-Free
Flow Way
Series NF-C Series NEI-T Teflon
Sizes 14 in. through 36 in. Because of the inert, aseptic non-stick character
(350 mm through 900 mm) are of Teflon, DEMCO’s NEI-T Teflon-lined butterfly
available in both wafer and lug valve is ideal for “clean” lines in food and
styles. beverage plants.
The wafer body has two drilled The Teflon seat consists of a virgin Teflon liner
locator lugs at top and bottom overlaying and bonded to an elastomer cushion
for ASME Class 150 flanges. (either Buna-N or EPT are available) which
Bronze bearings are installed provides resilience for sealing.
Series NF-C 16 in. (400 mm)
on both stems for minimum The Teflon liner extends over the seat faces,
operating torque. completely covering and sealing the resilient
material from contact with line fluids.
Marine
DEMCO Marine butterfly valves are available
in the NE-C Lug, NE-I Lug and Wafer and NE-D
Wafer styles and conform to Title 46 of the
Code of Federal Regulations, Part 56 of the
U.S. Coast Guard’s Marine Engineering
Regulations as well as the American Bureau of
Series NF-C 30 in. (750 mm) Shipping Standard including tagging per
MSS-SP-25 and testing per MSS-SP-67.

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 3
 DISTRIBUTED VALVES

BUTTERFLY VALVES STYLES AND ACCESSORIES

A
Actuators
DEMCO Series DR pneumatic actuators
are available in double-acting or
fail-safe, spring return models.
Series DR actuators are compact, high
torque, piston actuators.
B
Handles and stem extensions
Three basic handle designs interchange
on any 2 in. to 12 in. (50 mm to
300 mm) valves: ten position locking,
two position locking and memory stop.
Memory-stop handles provide
throttling which is infinitely adjustable
B and can be set by a lock nut with
Stem extension memory-stop setting (adjustable open
with handle stop).
on Series NE-I Handles are available in basic trim,
butterfly valve corrosion-resistant trim and sanitary
trim. Stem extensions are fabricated
from carbon steel parts and contained
in a tubular housing.
A
Gaskets and O-rings seal the stem
DEMCO NE-C wafer with
Series DR actuator
extension at top and bottom. These
extensions are fabricated to specified
lengths.
C
Gear operators
DEMCO weatherproof gear operators
are offered with a choice of
handwheel, chain-wheel, or square nut.
The worm gearing has self-locking set
screws to control open and closed
positioning or an optional adjustable
memory stop for “balance return” to
a preset open position after closing.

C
Gear operated

4 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES SERIES NE-C, NE-I, NE-D, NEI-T

2 in through 12 in. (50 mm through 300 mm) 1

22 1
Key No. Qty. Description Material Parts
Detail 24
1
1 1 Body *
4
1
2 1 Seat *
7
3 1 Disc *
14
4 1 Upper Stem * SERIES NE-D
24 WAFER
6 1 Lower Stem *
1
7 2 Spring Pin Stainless Steel SERIES NE-I
23 LUG
14 1 Retainer Stainless Steel SERIES NE-I
2 WAFER
22 1 Top O-Ring Buna-N
23 · Stem O-Ring Buna-N 3
SERIES NE-C
24 2 Bearing Bronze LUG
6
* See How to Order for material choices/styles.
Complete material specs on page 30. 7
· 4 required for throttling valves only. SERIES NE-C
23 WAFER

HOW TO ORDER (Example: 6 in. (150 mm) NE-C, 200 psi, Wafer, Standard Trim with Handle 22124-1215311)
XXXXX - X X X X X X
Base Part Body Body Stem Disc Seat Actuation
Number Configuration Material* Material Material Elastomer

7
NE-C/NE-I/NEI-T NE-C (Longneck) NE-C, NE-I NE-C, NE-I NE-C, NE-I & NE-D Handle
Wafer 1 Ductile Iron (lug) 1 & NE-D & NE-D Buna-N 31 10 Position Lkg. 1
4

Lug 5 Cast Iron (wafer) 2 416 SS 1 316 SS 2 Black Neoprene 32 Throttling 2

4

6
NE-D NE-I & NE-I Sanitary 316 SS** 2 Monel 3 Hypalon
6
33 Mem./Stop
6
Wafer 1 Ductile Iron 1 Monel 3 Aluminum 4 Viton
6
34 Square Nut 5
(NE-I, wafer only) NEI-T Bronze 4
Peroxide Cured 35 2 position Lkg. 6
Aluminum Bronze 3 316 SS 2 Ductile Iron 5 EPDM 10 position 8
Vented*** Nickel Plated
Carbon Steel 4 Natural Rubber 36 Sanitary
(NE-I only) 316 SS 9 PVF Coated 6 (NEI-T only)
Ductile Iron
1 White Neoprene 37
Aluminum 5 Solid*** None 9
Alloy 20
2
7 ETM-30230 01
(NE-I, wafer only) NEI-Sanitary 10 Position Lkg. K
6 Fluorosteam 02
ENC Coated 6 316 SS*** 2 Hastelloy “C” 8 Corrosion
Based on Ductile Iron Peroxide Cured 03 resistant
NEI-T &
valve series Food Grade EPT
Stainless Steel 8 NE-I Sanitary 2 Position Lkg. L
and shut off Peroxide Cured 04 Corrosion
NE-D 316 SS/ 0
pressure. Buna-N resistant
Ductile Iron 1 PVF Coated
See page 8 (NEI-T only) Sulfer Cured 05 Throttling/ M
NEI-T Food Grade EPDM Mem. Stop
316 SS 2
Ductile Iron 1 Polished
3
NEI-T Corrosion
Wafer-Shortneck 6 resistant
316 SS 5 BunaN/Teflon 31
lug-Longneck 3 Gear Operators
5
Tumbled Peroxide Cured 35
Gray Iron 2 6
Hand Wheel A
Alloy 20 7 EPDM/Teflon
(longneck wafer)
(NEI-T only) Sulfur Cured 05 Crank B
Aluminum Bronze 3 6
2 in. - 12 in.
Hastelloy “C” 8 EPDM/Teflon
Carbon Steel 4 (NEI-T only) (50 mm - 300 mm)
NE-I Sanitary
Aluminum 5 316 SS 9 All Seats Food Grade Chain Wheel C
(wafer only) Unpolished
3
Square Nut D
Buna-N 31
Stainless Steel 8 Bare Shaft E
Black Neoprene 32
Viton 34
* Standard coating is green enamel; other coatings available on request.
EPDM 35
** 17-4 PH SS for 8 in. - 12 in. (200 mm - 300 mm) upper stem only.
*** Except 17-4 PH upper 8 in. & 10 in. (200 mm & 250 mm). White Neoprene 37
1 200 psi only. Sulfer Cured EPDM 05
2 Except 285 psi.
3 Polished-ground to #4 dairy finish, Tumbled-vibratory finish to remove “as cast” surface, Unpolished- “as cast” surface.
4 When these options used with NE-I Sanitary butterfly valves, handles will be bronze with SS parts and fasteners.
5 Gear operator recommended for 8 in. - 12 in. (200 mm - 300 mm) sizes in all series.
6 See material trademark note on page 35.
7 Other seat options available (consult factory).

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 5
 DISTRIBUTED VALVES

BUTTERFLY VALVES SERIES NF-C

14 in. through 24 in. (350 mm through 600 mm)
Parts 24
Key No. Qty. Description Material
Detail
1 1 Body *
2 1 Seat * 4
3 1 Disc *
7
4 1 Upper Stem *
6 1 Lower Stem *
7 2 Spring Pin Stainless Steel 14
14 1 Retainer (Spacer) +
Stainless Steel
22 1 Top O-Ring Buna-N 24
23 · Stem O-Ring Buna-N
24 2 Bearing Bronze
* See How to Order for material choices/styles.
Complete material specs on page 30.
· 4 required for throttling valves only.
+ 14 in. through 20 in. (350 mm through 500 mm) Spacer. 23

23
1
3

6
2 7
23

23
25

HOW TO ORDER (Example: 18 in. (450 mm) NF-C, 150 psi Lug, SS Trim, Buna-N Seat, WGO. 23822-512231A)
XXXXX - X X X X X X
Base Part Body Body Stem Disc Seat Actuation
Number Configuration Material* Material Material Elastomer

Wafer 1 Ductile Iron (lug) 1 416 SS 1 316 SS 2 Buna-N 31 None 9

2
Lug 5 Cast Iron (wafer) 2 316 SS 2 Monel 3 Black Neoprene 32 Gear Operators
2 2
Steel (lug) 4 Monel 3 Aluminum 4 Hypalon 33 Hand Wheel A
Stainless Steel (lug) 8 Bronze 2
Viton 34 Chain Wheel C
Nickel Plated 5 EPDM 35 Square Nut D
Iron
Bare Shaft E
PVF Coated 6
1
Ductile Iron

Based on
shut off
pressure.
See page 8

* Standard coating is green enamel; other coatings available on request.

1 150 psi only.
2 See material trademark note on page 35.

6 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES SERIES NF-C

30 in. and 36 in. (750 mm and 900 mm)
Key No. Qty. Description Material
1 1 Body *
2 1 Seat - Hard-Backed *
3 1 Disc - 150 psi *

DEMCO
DEMCO
4 1 Upper Stem *
6 1 Lower Stem *
7 2 Disc Screw 18-8 SS
8 1 Key Stainless Steel
9 2 O-Ring Buna-N
14 1 Spacer Steel
24 2 Upper Bearing Bronze
25 1 Lower Bearing Bronze
26 1 Thrust Collar Bronze
27 1 Set Screw 18-8 SS Parts Detail
4
28 1 Cap Ductile Iron
24
29 4 Screw Carbon Steel 1
14
30 4 Lockwasher Carbon Steel
24
* See How to Order for material choices/styles.
Complete material specs on page 30. 2
3
8

7 9 6

25
27 26

28 29 30

HOW TO ORDER (example: 36 in. (900 mm), 150 psi, Bronze Disc, EPDM Seat with Gear Op 24357-111435A)
XXXXX - X X X X X X
Base Part Body Body Stem Disc Seat Actuation
Number Configuration Material* Material Material Elastomer

Wafer 1 Ductile Iron 1 416 SS 1 316 SS 2 Buna-N 31 Hand Wheel A

Lug 5 (wafer or lug) 316 SS 2 Monel 3 Black Neoprene 32 Chain Wheel C
Monel 3 Aluminum 4 Hypalon 33 Square Nut D
Bronze Viton 34 Bare Stem E
Ductile Iron 5 EPT 35
Nickel Plated

See page 8

* Standard coating is green enamel; other coatings available on request.

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 7
 DISTRIBUTED VALVES

BUTTERFLY VALVES
BASE PART NUMBERS AND WEIGHTS
SERIES NE-C, 2 in through 12 in. (50 mm through 300 mm)*
in. 2 2 1/2 3 4 5 6 8 10 12
Description (mm) (50) (65) (80) (100) (125) (150) (200) (250) (300)
200 psi 22119 22120 22121 22122 22123 22124 22125 22126 22127
285 psi 22225 22226 22227 22228 22229 22230 22231 22232 22233
50 psi 22234 22235 22236 22237 22238 22239 22240 22241 22242
Throttling 22243 22244 22245 22246 22247 22248 22249 22250 22251
Weight Wafer 5.8 7.0 7.7 11.4 14.7 17.6 28.5 47.9 71.0
(lbs-bare stem) Lug 8.0 9.9 10.7 17.0 24.5 28.5 43.5 65.9 98.5

SERIES NE-I, 2 in through 12 in. (50 mm through 300 mm)*

in. 2 2 1/2 3 4 5 6 8 10 12
Description (mm) (50) (65) (80) (100) (125) (150) (200) (250) (300)
200 psi 22128 22129 22130 22131 22132 22133 22134 22135 22136
285 psi 22252 22253 22254 22255 22256 22257 22258 22259 22260
50 psi 22261 22262 22263 22264 22265 22266 22267 22268 22269
Throttling 22270 22271 22272 22273 22274 22275 22276 22277 22278
Weight Iron, Steel, SS 4.9 6.4 6.9 10.2 13.7 16.4 28.4 44.8 66.8
(lbs-bare stem) Bronze 4.7 6.2 6.7 9.9 13.4 16.0 28.0 44.3 66.3
Wafer Aluminum 2.8 3.4 4.1 5.9 8.7 10.8 18.2 30.4 47.2
(lbs-bare stem) Bronze 6.8 8.7 9.5 15.7 23.1 27.0 42.0 64.4 96.8
Lug Steel, SS 7.0 8.9 9.7 16.0 23.5 27.5 42.5 64.9 97.5

SERIES NE-I, SANITARY, 2 in through 12 in. (50 mm through 300 mm)*

in. 2 2 1/2 3 4 6 8 10 12
Description (mm) (50) (65) (80) (100) (150) (200) (250) (300)
200 psi 23150 23151 23152 23153 23154 23155 23156 23157
Weights See chart above, NE-I, 2 in. - 12 in. (50 mm - 300 mm)

SERIES NE-D, 2 in through 12 in. (50 mm through 300 mm)*

in. 2 2 1/2 3 4 5 6 8 10 12
Description (mm) (50) (65) (80) (100) (125) (150) (200) (250) (300)
200 psi 22181 22129 25093 22183 22184 22185 22134 22186 22136
285 psi 22279 22253 25135 22281 22282 22283 22258 22284 22260
50 psi 22285 22262 25132 22287 22288 22289 22267 22290 22269
Throttling 22291 22271 25136 22293 22294 22295 22276 22296 22278
Weight (lbs-bare stem) Wafer 4.9 6.4 6.9 10.2 13.7 16.4 28.4 44.8 66.8

SERIES NEI-T, 2 in through 10 in. (50 mm through 250 mm)*

in. 2 2 1/2 3 4 6 8 10
Description (mm) (50) (65) (80) (100) (150) (200) (250)
150 psi 24680 24681 24682 24683 24684 24685 24686
Weight Iron, Steel, SS 4.9 6.4 6.9 10.2 16.4 28.4 44.8
(lbs-bare stem) Bronze 4.7 6.2 6.7 9.9 16.0 28.0 44.3
Wafer** Aluminum 2.8 3.4 4.1 5.9 10.8 18.2 30.4
(lbs-bare stem) Bronze 6.8 8.7 9.5 15.7 27.0 42.0 64.4
Lug** Steel, SS 7.0 8.9 9.7 16.0 27.5 42.5 64.9
* Gear Operator recomended for 8 in. through12 in. (200 mm through 300 mm) sizes.
** See NE-C chart above for weights of Long Neck Wafer and Lug valves.

SERIES NF-C, 14 in through 24 in. (350 mm through 600 mm)

in. 14 16 18 20 24 SERIES NF-C
Description (mm) (350) (400) (450) (500) (600) 30 in through 36 in. (750 mm through 900 mm)
150 psi 23820 23821 23822 23823 23824 in. 30 36
50 psi 24440 24441 24442 24443 24444 Description (mm) (750) (900)
Throttling 24445 24446 24447 24448 24449 150 psi 24141 24357
Weight Wafer 102 166 214 257 401 50 psi 24924 25061
(lbs-bare stem) Lug 116 203 239 332 535 Weights Consult Factory
Marine Valves: Consult factory for data sheets B-255, B-256 and B-258.

8 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES COMPONENT PARTS LIST: SERIES NE-C, NE-I, NE-D

22 1

Parts 24
Detail 1
4
7 1

14
1 SERIES NE-D
24 WAFER

1
SERIES NE-I
LUG
23 SERIES NE-I
WAFER
2

3 SERIES NE-C
LUG

6
7
SERIES NE-C
23 WAFER
PARTS LIST FOR SERIES NE-C, NE-I & NE-D (replacement parts for NE, NE-S & NE-N, consult factory or company representative).
KEY 2 in. 2 1/2 in. 3 in. 4 in. 5 in. 6 in. 8 in. 10 in. 12 in.
No. COMPONENT DESCRIPTION (50 mm) (65 mm) (80 mm) (100 mm) (125 mm) (150 mm) (200 mm) (250 mm) (300 mm)
1 BODY NE-C Wafer 22137-012 22138-012 22139-012 22140-012 22141-012 22142-012 22143-012 22144-012 22145-012
ASTM A48 Gray Iron -012
NE-C Lug 21986-051 21987-051 21988-051 21989-051 21990-051 21991-051 21992-051 21993-051 21994-051
Options ASTM A395 Ductile Iron -051
NE-I Wafer 22681-01x 22682-01x 22683-01x 22684-01x 22685-01x 22686-01x 22687-01x 22688-01x 22689-01x
Options ASTM A395 Ductile Iron -011, ASTM B148 Alunimum Bronze -013, ASTM A216 WCB Steel -014,
ASTM B179 Aluminum -015, DI/ENC -016, ASTM A351 SS -018
NE-I Lug 22695-05x 22696-05x 22697-05x 22698-05x 22699-05x 22700-05x 22701-05x 22702-05x 22703-05x
Options ASTM B148 Aluminum Bronze -053, ASTM A216 WCB Steel -054, ASTM A351 SS -058
NE-D Wafer 22187-021 22682-011 20594-021 22189-021 22190-021 22191-021 22687-011 22192-021 22689-011
Options ASTM A395 Ductile Iron -0x1
2 SEAT 1786-xxx 1788-xxx 1790-xxx6 1792-xxx 1794-xxx 1002-xxx 1798-xxx 1815-xxx 1817-xxx
Options Buna-N -031, Black Neoprene -032, Hypalon -033, Viton -034, EPDM1 -135, Nat. Rubber -036
3 in. NE-D Seat (see below 6 ) White Neoprene -037, Peroxide Cured Buna-N -231, Fluorosteam -244, ETM-30230 -331
3 DISC 200 psi 22045-0xx 22046-0xx 22047-0xx 22048-0xx 22049-0xx 22050-0xx 22051-0xx 22052-0xx 22053-0xx
285 psi 22196-0xx 22197-0xx 22198-0xx 22199-0xx 22200-0xx 22201-0xx 22202-0xx 22203-0xx 22204-0xx
50 psi 22205-0xx 22206-0xx 22207-0xx 22208-0xx 22209-0xx 22210-0xx 22211-0xx 22212-0xx 22213-0xx
Throttling 22214-0xx 22215-0xx 22216-0xx 22217-0xx 22218-0xx 22219-0xx 22220-0xx 22221-0xx 22222-0xx
Options 316 SS -002, Monel -003, Nickel Plated Ductile Iron -005, Alloy 202 -007, Hastelloy C -008, Aluminum Bronze3 -014
PVF Coated 200 psi 22714-001 22715-001 22716-001 22717-001 22718-001 22719-001 22720-001 22721-001 22722-001
4 UPPER STEM NE-C 22066-00x 22067-00x 22068-00x 22069-00x 22070-00x 22071-00x 22072-00x
NE-I 22073-00x 22074-00x 22075-00x 22076-00x 22077-00x 22078-00x 22079-00x
NE-D 22073-00x 22074-00x 22193-00x 22194-00x 22195-00x 22077-00x 22078-00x 22079-00x
UPPER STEM NE-C 22334-00x 22335-00x 22336-00x 22337-00x 22338-00x 22339-00x 22340-00x
-Utility Top NE-I 22341-00x 22342-00x 22343-00x 22344-00x 22345-00x 22346-00x 22347-00x
6 LOWER STEM 22080-00x 22081-00x 22082-00x 22083-00x 22084-00x 22085-00x 22086-00x
Stem Material Options 416 SS -001, 316 SS4 -002, Monel -003
7 SPRING PIN (2) 302 SS 5448-18720 5448-18724 5448-25028
14 RETAINER Stainless Steel 22117 13704 13705 13706 13707
22 TOP O-RING Buna-N 5526-114 5526-115 5526-117 5526-119 5526-125
23 STEM O-RING5 Buna-N 5526-113 5526-115 5526-116 5526-212 5526-214 5526-220
24 BEARING (2) Bronze 22526-001 22118-001 13112-001 13115-001 13116-001 13117-0013

1 EPDM Seat Options: Standard - Peroxide Cured -135, Food Grade -035 Peroxide Cured, Sulfer Cured -235.
2 Alloy 20 not available for 285 psi.
3 8 in. through 12 in. (200 mm through 300 mm), 285 psi Aluminum Bronze, use -024.
4 8 in. through 12 in. (200 mm through 300 mm), Upper Stem 17-4 PH SS (Part Number suffix -012), Lower Stem 316 SS.
5 4 required for throttling (0 psi) valves only.
6 3 in. (80 mm) NE-D Seat Part Number 25095-xxx. DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 9
 DISTRIBUTED VALVES

BUTTERFLY VALVES COMPONENT PARTS LIST: SERIES NF-C

24
Parts
Detail
4

14

24

23

23
1
3

6
2 7
23
23
25

PARTS LIST FOR SERIES NF-C (replacement parts for NF, consult factory or company representative).
KEY 14 in. 16 in. 18 in. 20 in. 24 in. Material
No. QTY. DESCRIPTION (350 mm) (400 mm) (450 mm) (500 mm) (600 mm)
1 1 BODY Lug 23827-051 23911-051 23901-051 23891-051 23875-051 Ductile Iron (Lug) -051
Wafer 23825-012 23907-012 23899-012 23881-012 23873-012 Cast Iron (Wafer) -012
Buna-N -031 Blk. Neoprene -032
2 1 SEAT 23829-03x 23913-03x 23903-03x 23893-03x 7103-03x Hypalon -033 Viton -034
EPDM3 -X35
DISC -150 psi 23830-0xx 23915-0xx 23905-0xx 23895-0xx 23877-0xx 316 SS -002 Monel -003
3 1 -50 psi 24450-0xx 24451-0xx 24452-0xx 24453-0xx 24454-0xx Aluminum Bronze -014
-Throttling 24455-0xx 24456-0xx 24457-0xx 24458-0xx 24459-0xx Ni. Plated Iron -005
-PVF CTD. 24460-001 24461-001 24462-001 24463-001 24464-001 PVF CTD Iron -001
4 1 UPPER STEM 23833-00x 23917-00x 23897-00x 23897-00x 23879-00x 416 SS -001, 316 SS -002
6 1 LOWER STEM 23834-00x 23918-00x 23898-00x 23898-00x 23880-00x Monel -003
7 2 SPRING PIN 5446-25040 5446-25040 5446-25048 5446-25048 5446-25064 Stainless Steel
14 1 RETAINER (SPACER) 2 5502-137 5502-150 5502-175 5502-175 24470 Steel
23 Note 1 DISC O-RING 5526-220 5526-223 5526-328 5526-328 5526-331 Buna-N
24 2 UPPER BEARING 5086-044 5086-050 5086-048 5086-048 5086-046 Bronze
25 1 LOWER BEARING 5086-045 5086-051 5086-049 5086-049 5086-047 Bronze
1 4 Required, throttling valves only.
2 14 in. through 20 in. (350 mm through 500 mm) Retainer, 24 in. (600 mm) Spacer.
3 EPDM Seat Options: Standard - Peroxide Cured -135, Food Grade -035 Peroxide Cured, Sulfer Cured -235.

10 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES SERIES NE-C

2 in. through 12 in. (50 mm through 300 mm)
F DIA

H DIA
45° G DIA

R DIA R DIA

N N
DEMCO

DEMCO
P P
J-Bolt Circle
K-Thread Size
L-No. of Lugs
C C

E A
DIA

DIMENSIONAL DATA
Size in. A C D E F G H J K L N P R S
2 1.74 5.62 8.44 4.12 4.00 3.25 0.408 4.75 5/8-11 4 1.00 0.44 0.625 0.375
2 1/2 1.86 6.12 9.19 4.88 4.00 3.25 0.408 5.50 5/8-11 4 1.00 0.44 0.625 0.375
3 1.86 6.38 9.69 5.38 4.00 3.25 0.408 6.00 5/8-11 4 1.00 0.44 0.625 0.375
4 2.11 7.12 11.00 6.88 4.00 3.25 0.408 7.50 5/8-11 8 1.00 0.44 0.625 0.375
5 2.24 7.75 12.12 7.75 4.00 3.25 0.408 8.50 3/4-10 8 1.25 0.44 0.838 0.500
6 2.24 8.25 13.25 8.75 4.00 3.25 0.408 9.50 3/4-10 8 1.25 0.44 0.838 0.500
8 2.54 9.44 15.56 11.00 6.00 5.00 0.533 11.75 3/4-10 8 1.38 0.56 0.838 0.500
10 2.74 11.25 18.69 13.38 6.00 5.00 0.533 14.25 7/8-9 12 1.38 0.56 0.963 0.625
12 3.24 12.19 21.69 16.12 6.00 5.00 0.533 17.00 7/8-9 12 1.38 0.56 1.338 0.750
Size mm
50 44 143 214 105 102 83 10.36 121 5/8-11 4 25 11.2 15.88 9.53
65 47 155 233 124 102 83 10.36 140 5/8-11 4 25 11.2 15.88 9.53
80 47 162 246 137 102 83 10.36 152 5/8-11 4 25 11.2 15.88 9.53
100 54 181 279 175 102 83 10.36 191 5/8-11 8 25 11.2 15.88 9.53
125 57 197 308 197 102 83 10.36 216 3/4-10 8 32 11.2 21.29 12.70
150 57 210 337 222 102 83 10.36 241 3/4-10 8 32 11.2 21.29 12.70
200 65 240 395 279 152 127 13.54 298 3/4-10 8 35 14.2 21.29 12.70
250 70 286 475 340 152 127 13.54 362 7/8-9 12 35 14.2 24.46 15.88
300 82 310 551 409 152 127 13.54 432 7/8-9 12 35 14.2 33.99 19.05
Note: For general dimensions, see page 27.

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 11
 DISTRIBUTED VALVES

BUTTERFLY VALVES SERIES NF-C

14 in. through 24 in. (350 mm through 600 mm)

H DIA
G DIA
45°

S Keyway
DIA R 4 Locating Lugs For
ASME Class 125/150
N Flanged Pattern M
J-Bolt Circle J-Bolt Circle
K-Bolt Diameter
DEMCO

K-Thread Size
P L-No. of Bolts Total T

DEMCO
L-No. of Lugs

D
U

E A

DIMENSIONAL DATA
Size in. A B C D E G H J K L M N P R S T U
14 3.00 10.63 12.75 23.4 16.20 5.00 0.56 18.75 1-8 12 2.00 2.25 0.88 1.375 5/16 x 5/32 5.12 12.89
17.3* 1*
16 4.00 11.66 13.75 25.4 18.16 5.00 0.56 21.25 1-8 16 2.00 2.25 0.88 1.625 3/8 x 3/16 5.65 14.76
19.2* 1*
18 4.50 12.96 14.75 27.7 20.35 6.50 0.81 22.75 1 1/8-7 16 2.50 2.75 1.00 1.875 1/2 x 3/16 6.37 16.63
21.4* 1 1/8*
20 5.00 13.97 15.75 29.7 22.63 6.50 0.81 25.00 1 1/8-7 20 2.50 2.75 1.00 1.875 1/2 x 3/16 7.12 18.58
23.6* 1 1/8*
24 6.00 16.19 19.00 35.2 27.31 6.50 0.81 29.50 1 1/4-7 20 2.50 3.00 1.00 1.875 1/2 x 3/16 8.67 22.56
28.3* 1 1/4*
Size mm
350 76 270 324 594 411 127 14.2 476 1-8 12 51 57 22.4 34.93 7.94 x 3.97 130 327
439* 1*
400 102 296 349 645 461 127 14.2 540 1-8 16 51 57 22.4 41.28 9.53 x 4.76 144 375
488* 1*
450 114 329 375 704 517 165 20.6 578 1 1/8-7 16 64 57 25.4 47.63 12.70 x 4.76 162 422
544* 1 1/8*
500 127 355 400 754 575 165 20.6 635 1 1/8-7 20 64 57 25.4 47.63 12.70 x 4.76 181 472
599* 1 1/8*
600 152 411 483 894 694 165 20.6 749 1 1/4-7 20 64 76 25.4 47.63 12.70 x 4.76 220 573
719* 1 1/4*
* Wafer valve dimension is the bottom figure. Lug valve dimension is the top figure.
Note: For general dimensions, see page 27.

12 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES SERIES NF-C

30 in. through 36 in. (750 mm through 900 mm)
For ASME Class 150 Series A
& MSS SP-44 Flanged Pattern
DIA R
J-Bolt Circle
N K-Bolt Size
L-No. of Bolts Total
V-Depth of Thread

DEMCO
H DIA
G DIA
45°

4 Locating Lugs For S Keyway

ASME Class 150 Series A
DIA R and MSS SP-44
Flanged Pattern
N M
J-Bolt Circle
K-Bolt Size
DEMCO

L-No. of Bolts Total T

P V-Depth of Thread
C

D U

E A

DIMENSIONAL DATA
Size in. A B C D E G H J K L M N P R S T U V
30 6.50 21.2 23.0 44.2 34.1 8.00 0.69 36.00 1 1/4-7UNC 28 3.4 3.7 1.2 3.000 3/4 x 3/8 11.45 28.55 1.750
36 7.88 25.0 27.8 52.8 40.5 10.25 0.81 42.75 1 1/2-6UNC 32 4.0 4.4 1.5 3.625 7/8 x 7/16 13.86 34.71 1.750
Size mm
750 165 538 584 1123 866 203 17.53 914 1 1/4-7UNC 28 86 94 30.5 76.2 19.05 x 9.53 291 725 44.45
900 200 635 706 1342 1029 260 20.57 1086 1 1/2-6UNC 32 102 112 38.1 92.1 22.23 x 11.11 352 882 44.45
Note: For general dimensions, see page 27.

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 13
 DISTRIBUTED VALVES

BUTTERFLY VALVES SERIES NE-D

2 in. through 12 in. (50 mm through 300 mm)

F DIA
DIA R

N S

J-Bolt Circle
DEMCO

P K-Stud Size H DIA

L-No. of Studs
45° G DIA
C

E A

DIMENSIONAL DATA
Size in. A C D E F G H J K L N P R S
2 1.74 3.94 6.75 4.12 4.00 3.25 0.408 4.27 3/8 4 1.00 0.44 0.625 0.375
2 1/2 1.86 4.44 7.50 4.88 4.00 3.25 0.408 5.31 3/8 4 1.00 0.44 0.625 0.375
3 1.86 4.88 8.19 5.38 4.00 3.25 0.408 4.91 3/8 6 1.00 0.44 0.625 0.375
4 2.11 6.00 9.88 6.88 4.00 3.25 0.408 7.03 1/2 6 1.00 0.44 0.625 0.375
5 2.24 6.00 10.38 7.75 4.00 3.25 0.408 7.56 1/2 6 1.25 0.44 0.838 0.500
6 2.24 6.50 11.50 8.75 4.00 3.25 0.408 9.16 1/2 8 1.25 0.44 0.838 0.500
8 2.54 8.06 14.19 11.00 6.00 5.00 0.533 11.72 5/8 8 1.38 0.56 0.838 0.500
10 2.74 9.97 17.41 13.38 6.00 5.00 0.533 13.72 5/8 8 1.38 0.56 0.963 0.625
12 3.24 10.91 20.41 16.12 6.00 5.00 0.533 16.62 1/2 12 1.38 0.56 1.338 0.750
Size mm
50 44 100 171 105 102 83 10.36 108 10 4 25 11.2 15.88 9.53
65 47 113 191 124 102 83 10.36 135 10 4 25 11.2 15.88 9.53
80 47 124 208 137 102 83 10.36 125 10 6 25 11.2 15.88 9.53
100 54 152 251 175 102 83 10.36 179 15 6 25 11.2 15.88 9.53
125 57 152 264 197 102 83 10.36 192 15 6 32 11.2 21.29 12.70
150 57 165 292 222 102 83 10.36 233 15 8 32 11.2 21.29 12.70
200 65 205 360 279 152 127 13.54 298 16 8 35 14.2 21.29 12.70
250 70 253 442 340 152 127 13.54 348 16 8 35 14.2 24.46 15.88
300 82 277 518 409 152 127 13.54 422 15 12 35 14.2 33.99 19.05
Note: For general dimensions, see page 27.

14 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES SERIES NE-I, NE-I SANITARY

2 in. through 12 in. (50 mm through 300 mm)

N N
DIA R DIA R

J-Bolt Circle

DEMCO
DEMCO

K-Stud Size
P P L-No. of Studs
C C

F DIA
D

H DIA
45° G DIA

E A

DIMENSIONAL DATA
Size in. A C D E F G H J K L N P R S
2 1.74 3.94 6.75 4.12 4.00 3.25 0.408 4.75 5/8-11 4 1.00 0.44 0.625 0.375
2 1/2 1.86 4.44 7.50 4.88 4.00 3.25 0.408 5.50 5/8-11 4 1.00 0.44 0.625 0.375
3 1.86 4.69 8.00 5.38 4.00 3.25 0.408 6.00 5/8-11 4 1.00 0.44 0.625 0.375
4 2.11 5.44 9.31 6.88 4.00 3.25 0.408 7.50 5/8-11 8 1.00 0.44 0.625 0.375
5* 2.24 6.38 10.75 7.75 4.00 3.25 0.408 8.50 3/4-10 8 1.25 0.44 0.838 0.500
6 2.24 6.88 11.88 8.75 4.00 3.25 0.408 9.50 3/4-10 8 1.25 0.44 0.838 0.500
8 2.54 8.06 14.19 11.00 6.00 5.00 0.533 11.75 3/4-10 8 1.38 0.56 0.838 0.500
10 2.74 9.97 17.41 13.38 6.00 5.00 0.533 14.25 7/8-9 12 1.38 0.56 0.963 0.625
12 3.24 10.91 20.41 16.12 6.00 5.00 0.533 17.00 7/8-9 12 1.38 0.56 1.338 0.750
Size mm
50 44 100 171 105 102 83 10.36 121 5/8-11 4 25 11.2 15.88 9.53
65 47 113 191 124 102 83 10.36 140 5/8-11 4 25 11.2 15.88 9.53
80 47 119 203 137 102 83 10.36 152 5/8-11 6 25 11.2 15.88 9.53
100 54 138 236 175 102 83 10.36 191 5/8-11 6 25 11.2 15.88 9.53
125* 57 162 273 197 102 83 10.36 216 3/4-10 6 32 11.2 21.29 12.70
150 57 175 302 222 102 83 10.36 241 3/4-10 8 32 11.2 21.29 12.70
200 65 205 360 279 152 127 13.54 298 3/4-10 8 35 14.2 21.29 12.70
250 70 253 442 340 152 127 13.54 362 7/8-9 8 35 14.2 24.46 15.88
300 82 277 518 409 152 127 13.54 432 7/8-9 12 35 14.2 33.99 19.05
* NE-I Sanitary 5 in. (125 mm) not available.
Note: For general dimensions, see page 27.

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 15
 DISTRIBUTED VALVES

BUTTERFLY VALVES SERIES NEI-T

2 in. through 10 in. (50 mm through 250 mm)

F DIA

H DIA

45° G DIA

N N
DIA R DIA R

J-Bolt Circle

DEMCO
DEMCO

K-Stud Size
P P L-No. of Lugs
C C

E A

DIMENSIONAL DATA
Size in. A C D E F G H J K L N P R S
2 1.74 3.94 6.75 4.12 4.00 3.25 0.408 4.75 5/8-11 4 1.00 0.44 0.625 0.375
2 1/2 1.86 4.44 7.50 4.88 4.00 3.25 0.408 5.50 5/8-11 4 1.00 0.44 0.625 0.375
3 1.86 4.69 8.00 5.38 4.00 3.25 0.408 6.00 5/8-11 4 1.00 0.44 0.625 0.375
4 2.11 5.44 9.31 6.88 4.00 3.25 0.408 7.50 5/8-11 8 1.00 0.44 0.625 0.375
6 2.24 6.88 11.88 8.75 4.00 3.25 0.408 9.50 3/4-10 8 1.25 0.44 0.838 0.500
8 2.54 8.06 14.19 11.00 6.00 5.00 0.533 11.75 3/4-10 8 1.38 0.56 0.838 0.500
10 2.74 9.97 17.41 13.38 6.00 5.00 0.533 14.25 7/8-9 12 1.38 0.56 0.963 0.625
Size mm
50 44 100 171 105 102 83 10.36 121 5/8-11 4 25 11.2 15.88 9.53
65 47 113 191 124 102 83 10.36 140 5/8-11 4 25 11.2 15.88 9.53
80 47 119 203 137 102 83 10.36 152 5/8-11 6 25 11.2 15.88 9.53
100 54 138 236 175 102 83 10.36 191 5/8-11 6 25 11.2 15.88 9.53
150 57 175 302 222 102 83 10.36 241 3/4-10 8 32 11.2 21.29 12.70
200 65 205 360 279 152 127 13.54 298 3/4-10 8 35 14.2 21.29 12.70
250 70 253 442 340 152 127 13.54 362 7/8-10 8 35 14.2 24.46 15.88

Note: For general dimensions, see page 27.

16 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES
HOW TO ORDER
How to Order (X X X X X - 0 0 X)

XXXXX - 00X
8
Base Part Trim 27
Number 20

5
25

Standard 1
Corrosive 2 15 28
Resistant
Sanitary 3 29
16
26 16

in. 2 to 4 5 to 6 8 10 12 19 19
Description (mm) (50 to 100) (125 to 150) (200) (250) (300)
10 Position, Standard, CR 24227 24228 24229 24230 24231 M

2 Position, Standard, CR 24232 24233 24234 24235 24236 N

10 Position, Sanitary 22319 22320 22321 22322 22323
2 Position, Sanitary 22324 22325 22326 22327 22328
Throttling, Standard, CR 24252 24253 24254 24255 24256 Infinite Throttling with Memory Stop Handle
Throttling, Sanitary 22329 22330 22331 22332 22333 in. 2 to 4 5 to 6 8 to 12
Dimension (mm) (50 to 100) (125 to 150) (200 to 300)
Square Nut, Standard 23356 23357 23358 23359 22360 M 9.50 (241) 11.00 (279) 15.00 (381)
Weight (lbs.) 2.3 2.9 6.5 6.5 6.5 N 0.85 (21.6) 1.07 (27.2) 1.13 (28.7)

2 Position/10 Position Locking Handles M

8 N

12
5 15
20 0.25 PADLOCK HOLE
10
11
15 2 Position/10 Position Locking Handles
10
in. 2 to 4 5 to 6 8 to 12
Dimension (mm) (50 to 100) (125 to 150) (200 to 300)
Note: These throttling
M 9.50 (241) 11.00 (279) 15.00 (381)
16 plates and latch apply to
Sanitary Trim handles only. N 0.87 (22.1) 1.07 (27.2) 1.13 (28.7)
19

2.0 in.
Key Material (50.8 mm)
No. Description Standard Corrosion Resistant Sanitary SQ.

5 Screw Steel Stainless Steel Stainless Steel 1.25 in.

8 Handle Ductile Iron Ductile Iron Bronze (31.75 mm)
2.25 in.
10 Latch Zinc Plated Steel Stainless Steel Stainless Steel (57.15 mm)

11 Spring Spring Steel Stainless Steel Stainless Steel

12 Spring Pin Spring Steel Stainless Steel Stainless Steel
15 Throttle Plate Zinc Plated Steel Stainless Steel Stainless Steel
16 Lockwasher Steel Stainless Steel Stainless Steel Square Nut Handle
19 Nut Steel Stainless Steel Stainless Steel Description Material
20 Set Screw Steel Stainless Steel Stainless Steel Square Nut Hub Ductile Iron
25* Throttling Tab Zinc Plated Steel Stainless Steel Stainless Steel Throttle Plate Steel
26* Carriage Bolt Steel Stainless Steel Stainless Steel Screw Steel
27* Wing Nut Steel Stainless Steel Stainless Steel Set Screw Steel
28* Screw Steel Stainless Steel Stainless Steel Screw Steel
29* Nut Steel Stainless Steel Stainless Steel Lock Washer Spring Steel
* For Throttling memory Stop Handle only.

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 17
 DISTRIBUTED VALVES

BUTTERFLY VALVES WORM GEAR OPERATORS

Manual worm gear operators are self locking in all positions. Gray iron weatherproof case and cover enclose a ductile iron
Adjustment screws stop travel at open and closed positions. gear and hardened steel worm supported by bronze bearings.
Position indicator is standard on all models. Standard external coating is green enamel; white epoxy, coal
Gearing is permanently lubricated. tar epoxy and inorganic zinc primer available, special order.

HOW TO ORDER
2 in. through 12 in. (50 mm through 300 mm) (Example: 6 in. (150 mm) with Handwheel 22622-21352)
XXXXX - X X X X X
Base Part Case Gear Actuation Valve Configuration
Number Material Material Size

Gray Iron 2 Ductile Iron 1 Crank 1 2 in. to 4 in. 1 Standard 2

Hand Wheel 3 (50 mm to 100 mm)
Chain Wheel 5 5 in. & 6 in. 5
125 mm & 150 mm)
Square Nut 6
8 in. (200 mm) 7
None 9
10 in. (250 mm) 8
12 in. (300 mm) 9

Description 2 in. to 4 in. 5 in. to 6 in. 8 in. 10 in. 12 in.

(50 mm to 500 mm) (125 mm to 150 mm) (200 mm) (250 mm) (300 mm)
Operator Base No. 22622 22622 22623 22623 22623
Additional Information
Chain Suffix = Length in Ft.* 4462-XXX 4462-XXX 4462-XXX 4462-XXX 4462-XXX
Weight (lb. (kg) with handwheel) 7.8 (3.5) 7.8 (3.5) 17.2 (7.8) 17.2 (7.8) 18.6 (8.4)

HOW TO ORDER
14 in. through 36 in. (350 mm through 900 mm)
XXXXXXX - XX
Base Part Gear Operator
Number Assembly Part Number

Gear Operator Less Actuation 09

Gear Operator With Handwheel 03
Gear Operator With Chainwheel 05
Gear Operator With Square Nut 06

Description 14 in. 16 in. 18 in. to 20 in. 24 in. 30 in. 36 in.

(350 mm) (400 mm) (450 mm to 500 mm) (600 mm) (750 mm) (900 mm)
Operator Base No. 2060229 2060230 2060231 2060232 2060332 2060334
Additional Information
Chain Suffix = Length in Ft.* 4462-XXX 4463-XXX 4463-XXX 19932-XXX 4463-XXX 19932-XXX
Weight (lb. (kg) with handwheel) 19.0 (8.6) 22.0 (10.0) 33.0 (15.0) 43.0 (19.5) 107.0 (48.5) 137.0 (62.1)

Valve Size in. (mm) Gear Ratio Turns/90° Rotation Maximum Input Torque
2 to 6 (50 to 150) 30:1 7 1/2 46 ft.-lbs.
8 to12 (200 to 300) 48:1 12 65 ft.-lbs.
14 to16 (350 to 400) 48:1 12 65 ft.-lbs.
18 to 20 (450 to 500) 57:1 14 1/4 98 ft.-lbs.
24 (600) 60:1 15 164 ft.-lbs.
30 (750) 316:1 79 104 ft.-lbs.
36 (900) 240:1 60 174 ft.-lbs.
* Chain Length (xxx) = 000 through 999 ft. (Chain ordered separately).

18 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES WORM GEAR OPERATORS

K
A B C C
J DIA
A B N
K

L DIA D
F
P
CL

E O
SE OP EN D
EN
D OP L DIA
F C C
L L
O O
S S
E E

E OPTIONAL HANDWHEEL

H
G J DIA

J DIA

M1
M
H
G

DEMCO
2 in. (50 mm) THROUGH 24 in. (600 mm) VALVES

R
V
S
2 in. - 24 in.
DEMCO

(50 mm - 600 mm)

VALVES 2 in. SQ.
T (50.8 mm) SQ.

U OPTIONAL SQUARE NUT

OPTIONAL CHAINWHEEL
Valves with chainwheels should be installed
upside down as noted to ensure pipe clearance
and allow visual contact with the position indicator.
DIMENSIONAL DATA
Size in. A B C D E F G H J K L M M1 N P R S T U V
2 to 6 1.80 1.80 3.80 1.64 1.59 4.97 0.90 2.30 0.623 1.00 0.19 - - 4.80 6 4.80 4.10 3.50 4.80 4.60
8 to 10 2.88 2.88 3.38 2.50 2.88 6.50 1.38 3.00 0.623 1.00 0.19 - - 4.32 6 4.32 3.72 3.50 4.80 4.12
12 2.88 2.88 3.38 2.50 2.88 6.50 1.38 3.00 0.623 1.00 0.19 - - 5.02 8 4.32 3.72 3.50 4.80 4.12
14 2.88 2.88 5.12 2.50 2.88 6.50 1.38 3.00 0.623 1.25 0.19 - - 6.56 12 5.88 5.25 5.81 5.75 5.69
16 2.88 2.88 5.88 2.50 2.88 6.50 1.38 3.00 0.623 1.25 0.25 - - 11.00 18 7.69 6.38 9.12 8.69 6.75
18 to 20 3.12 3.12 7.12 3.00 3.12 7.69 1.50 3.25 1.000 1.25 0.25 - - 11.25 18 8.94 7.63 9.12 8.69 8.00
24 3.44 3.44 5.28 3.63 3.25 8.38 1.63 3.56 1.000 1.25 0.38 - - 10.91 24 7.59 5.91 11.00 12.25 6.16
30 4.56 8.88 4.52 4.63 4.63 11.08 2.00 4.44 1.000 1.25 0.39 6.00 7.38 8.65 18 7.59 6.28 9.12 8.69 5.41
36 5.88 9.12 4.56 6.25 5.88 14.50 2.31 5.00 1.000 1.25 0.39 6.36 8.00 10.19 24 8.13 6.44 11.00 12.25 5.44
Size mm
50 to 150 46 46 97 42 40 126 23 58 15.8 25 4.8 - - 122 152 122 104 89 122 117
200 to 250 73 73 86 64 73 165 35 76 16 25 4.8 - - 110 152 110 94 89 122 105
300 73 73 86 64 73 165 35 76 16 25 4.8 - - 128 203 110 94 89 122 105
350 73 73 130 64 73 165 35 76 16 32 4.8 - - 167 305 149 133 148 146 145
400 73 73 149 64 73 165 35 76 16 32 6.4 - - 279 457 195 162 232 221 171
450 to 500 79 79 181 76 79 195 38 83 25 32 6.4 - - 286 457 227 194 232 221 203
600 87 87 134 92 83 213 41 90 25 32 9.7 - - 277 610 193 150 279 311 156
750 116 226 115 118 118 281 51 113 25 32 9.9 152 187 220 457 193 160 232 221 137
900 149 232 116 159 149 368 59 127 25 32 9.9 162 203 259 610 207 164 279 311 138
* DT-1 Gear operator dimensions became standard gear operator midyear 2000 (for old style DT-3, consult factory).

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 19
 DISTRIBUTED VALVES

BUTTERFLY VALVES DR PISTON ACTUATORS

DEMCO Series DR Piston Actuators consist of two opposed Consult the factory for complete data sheets showing
pistons with integral gear racks which are coupled to a mounting configurations. Flatted stems are standard on
common central drive shaft to produce rotary motion. 2 in. through 12 in. (50 mm through 300 mm) Butterfly
Valves (NE-C, NE-I, NE-D), whereas 14 in. through 36 in.
In the basic unit, the Body, Pistons and End Caps are (350 mm through 900 mm) NF-C utilize a keyed stem.
aluminum; the Central Drive Shaft is hard anodized, high
performance Aluminum Alloy 70-75. The Fasteners are Series DR Actuators are available as Double-Acting or
plated steel; the Seals are Buna-N. All units are totally Spring Return. Double-Acting is the most economical,
enclosed and use gaskets for weatherproof operation. requiring either air or hydraulic pressure for opening
Carbon filled teflon guide bands support the pistons to and closing (fail last position).
eliminate metal-to-metal contact during actuator operation. Spring-Return Actuators
As a result, piston O-rings designed for sealing are not use compression spring(s) Remove indicator
required to perform bearing functions. to move valve in one for access to manual
direction, while air override wrench flats
Mounting the actuator to the valve for many popular sizes
is direct, requiring only a splined, aluminum stem adapter. pressure moves it in
Other sizes may require the addition of an aluminum the opposite direction.
adapter plate, but still make a closed coupled unit. Spring Return Actuators
Some sizes (mostly the larger valves) will require the are used when valves
traditional steel brackets/coupling mounting kit. must move to a
predetermined position
Double Acting Actuator for NE-C, NE-I, NE-D and NF-C upon air supply failure
Butterfly Valves (fail open or fail closed).
Assembly Part Number Actuator
Orientation
J024872-0 XX X X Actuator Torque Output (in-lb), Double Acting
OPEN Actuator Supply Pressure (psi)
Model 40 60 80 100 120
Actuator Size Orientation
EDA40 204 310 416 513 620
EDA 40 01 See drawing 0
EDA65 310 469 628 788 947
EDA 65 02 See drawing 3
EDA100 460 699 929 1168 1398
EDA 100 03
Valve Size EDA200 1009 1522 2044 2558 3071
EDA 200 04
2 in to 4 in. 1 EDA350 1761 2655 3549 4443 5337
EDA 350 05 Orientation 0
(50 mm to 100 mm)
EDA 600 26 EDA600 2986 4507 6028 7548 9069
5 in. & 6 in. 2
EDA 950 27 (125 mm & 150 mm) EDA950 4458 6728 8997 11267 13537
CLOSE
PDA 1100 08 8 in. (200 mm) 3 EDA1600 7369 11121 14874 18626 22379
PDA 2500 09 10 in. (250 mm) 4 PDA2500 11825 17847 23869 29891 35912
PDA 4000 10 12 in. (300 mm) 5 PDA4000 19962 30127 40293 50458 60623
14 in. (350 mm) 6 Consult factory for complete data sheets with dimensional information.
16 in. (400 mm) 7
18 in. to 24 in. 8
(450 mm to 600 mm) Orientation 3

Butterfly Valve Torques (except Series NE I-T)**- Normal Wet Opening

Valve Size in. 2 2 1/2 3 4 5 6 8 10 12 14 16 18 20 24 30 36
(mm) (50) (65) (80) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) (750) (900)
285 psi Shut Off 225 326 510 765 1190 1530 2550 4125 7000 - - - - - - -
200 psi Shut Off 132 192 300 450 700 900 1500 2650 4500 - - - - - - -
150 psi Shut Off - - - - - - - - - 7740 10280 12600 15600 30000 50000 67500
50 psi Shut Off 108 108 192 264 450 550 1000 1800 3000 4500 6500 8400 10800 20000 30000 50000
Throttling* 72 72 90 108 144 180 350 700 1160 1660 2800 3400 5000 8400 - -

Butterfly Valve Torques (except Series NE I-T)**- Three-Way Assemblies

Valve Size in. 2 2 1/2 3 4 5 6 8 10 12 14 16 18 20 24 30 36
(mm) (50) (65) (80) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) (750) (900)
285 psi Shut Off 338 489 765 1148 1785 2295 3825 6188 10500 - - - - - - -
200 psi Shut Off 198 288 450 675 1050 1350 2250 3975 6750 - - - - - - -
150 psi Shut Off - - - - - - - - - 11610 15420 18900 23400 45000 - -
50 psi Shut Off 162 162 288 396 675 825 1500 2700 4500 6750 9750 12600 16200 30000 - -
Throttling* 144 144 180 216 288 360 700 1400 2320 3320 5600 6800 10000 16800 - -
* When line velocity exceeds 15 feet per second, dynamic torque exceeds opening torque.
** For Series NEI-T Butterfly Valve torque requirement, consult factory.

20 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES DR PISTON ACTUATORS

Spring Return Actuator ESA 40 through ESA 1600 for
NE-C, NE-I, NE-D and NF-C Butterfly Valves
Assembly Part Number
Actuator Orientation
J024873- X XX X X

OPEN CLOSE
Springs* Actuator Size Orientation Valve Size
Spring Set 2 2 ESA 40 01 See drawing 0 2 in to 4 in. 1
Spring Set 3 3 ESA 65 02 See drawing 3 (50 mm to 100 mm)

Spring Set 4 4 ESA 100 03 5 in. & 6 in. 2

(125 mm & 150 mm)
Spring Set 5 5 ESA 200 04
(Standard) 8 in. (200 mm) 3
ESA 350 05
Spring Set 6 6 10 in. (250 mm) 4
ESA 600 26**
12 in. (300 mm) 5
ESA 950 27**
14 in. (350 mm) 6
ESA1600 28** Orientation 0 Orientation 3
16 in. (400 mm) 7 Spring Close Spring Open
18 in. to 20 in. 8 (Stroke C & F) (Stroke D & E)
(450 mm to 500 mm)
Actuator Torque Output (in.-lb.)
Air Stroke Supply Pressure (psi)
Actuator Spring 40 60 80 100 120 Spring Stroke
Model Set No. C D C D C D C D C D E F
2 133 82 243 193 - - - - - - 117 73
3 91 15 201 125 312 236 422 346 - - 176 110
ESA40 4 - - 159 58 270 169 380 279 491 389 234 146
5 - - - - 227 101 338 212 448 322 293 183
6 - - - - 185 34 296 144 406 255 351 220
2 196 117 364 285 - - - - - - 186 117
3 129 10 297 178 466 347 634 515 - - 279 175
ESA65 4 - - 230 71 398 240 567 408 735 576 372 234
5 - - - - 331 133 499 301 668 470 465 292
6 - - - - - - 432 194 601 363 558 351
2 303 192 552 441 - - - - - - 258 161
3 211 44 460 293 709 541 957 790 - - 387 242
ESA100 4 - - 367 144 616 393 865 642 1114 891 516 323
5 - - - - 523 245 772 494 1021 743 646 402
6 - - - - 430 96 679 345 928 594 775 484
2 656 406 1201 952 - - - - - - 579 362
3 448 74 994 619 1539 1165 2085 1710 - - 868 542
ESA200 4 - - 786 287 1331 832 1877 1378 2423 1923 1157 723
5 - - - - 1124 500 1669 1045 2215 1591 1447 904
6 - - - - 916 167 1461 713 2007 1258 1736 1085
2 1105 684 2053 1632 - - - - - - 1025 658
3 727 95 1675 1043 2623 1991 3571 2939 - - 1537 987
ESA350 4 - - 1296 454 2244 1402 3193 2350 4141 3299 2049 1317
5 - - - - 1866 814 2814 1762 3762 2710 2531 1646
6 - - - - - - 2436 1173 3384 2121 3074 1975
* Consult factory for complete data sheets with dimensional information.
** See page 23 for Actuator Torque Output for models ESA 600, 950, and 1600. Spring Set Arrangement
C
CW - 0.5° NOTE: This graphic for
F PSA series only**.

91.5° The actuator shaft

is shown rotated
Air Stroke Spring Stroke
C E Spring Set #2 Spring Set #3
Start Start Mid Spring Only Outer Spring Only
D F
D E End End
CCW 91°
0° 90° 0° 90°
Rotation Rotation
Pressure on Port “A”
Counterclockwise Clockwise
Rotates shaft CCW. Spring Set #4 Spring Set #5 Spring Set #6
A
B (Breather) Inner Spring Mid Spring Inner Spring
Outer Spring Outer Spring Mid Spring
NOTE: This graphic also applies to models ESA 600, 900, and 1600 (torque values on page 22). Outer Spring

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 21
 DISTRIBUTED VALVES

BUTTERFLY VALVES DR PISTON ACTUATORS

Spring Return Actuator PSA 2500 through PSA 4004 for
NE-C, NE-I, NE-D and NF-C Butterfly Valves
Actuator Orientation
Assembly Part Number
J024873- X XX X X

OPEN CLOSE
No. of Springs Actuator Size Orientation Valve Size
8 Springs 4 2500 09 See drawing 0 4 in. (100 mm) 1
10 Springs 5 4000 10 See drawing 3 5 in. & 6 in. 2
12 Springs 6 4004 11 (125 mm & 150 mm)

14 Springs 7 8 in. (200 mm) 3

(Standard) 10 in. (250 mm) 4
12 in. (300 mm) 5
14 in. (350 mm) 6
16 in. (400 mm) 7 Orientation 0 Orientation 3
18 in. to 24 in. 8 Spring Close Spring Open
(450 mm to 600 mm) (Stroke C & F) (Stroke D & E)

Actuator Torque Output (in.-lb.), Spring Return

Air Stroke Supply Pressure (psi)
Actuator Spring 40 60 80 100 120 Spring Stroke
Model Set No. C D C D C D C D C D E F
2 1920 1183 3531 2794 5142 4405 6753 6017 8364 7628 1723 1083
3 1296 193 2908 1804 4520 3415 6131 5026 7742 6637 2584 1623
ESA600** 4 - - 2287 813 3896 2425 5509 4036 7120 5647 3447 2165
5 - - - - 3276 1435 4887 3046 6496 4656 4308 2706
6 - - - - 2654 444 4265 2055 5876 3666 5170 3247
2 2898 1777 5303 4182 7708 6587 10113 8992 12518 11396 2562 1587
3 1986 305 4391 2709 6796 5114 9200 7519 11605 9924 3844 2381
ESA950** 4 - - 3478 1237 5883 3641 8289 6046 10694 8451 5126 3175
5 - - - - 4972 2168 7376 4573 9781 6978 6407 3968
6 - - - - 4059 696 6464 3100 8869 5505 7688 4762
2 4765 2988 8741 6964 12716 10939 16692 14914 20668 18890 4193 2646
3 3245 579 7220 4554 11195 8530 15171 12505 19147 16481 6289 3970
ESA1600** 4 - - 5699 2145 9675 6120 13650 10095 17625 14071 8385 5293
5 - - - - 8153 3710 12129 7686 16105 11662 10481 6616
6 - - - - 6633 1301 10609 5277 14583 9252 12578 7939
8 7533 3750 13555 9772 - - - - - - 7558 3863
10 6460 1731 12482 7753 18504 13775 24525 19796 - - 9448 4629
PSA2500
12 - - 11409 5734 17430 11756 23452 17778 - - 11338 5794
14 - - 10336 3715 16357 9737 22379 15759 28401 21781 13227 6760
8 11288 3299 21454 13465 31619 23630 - - - - 15596 7806
10 - - 19282 9299 29451 19464 39616 29630 - - 19495 9758
PSA4000
12 - - 17117 5133 27282 15299 37447 25464 47613 35629 23395 11710
14 - - - - 25114 11133 35279 21298 45444 31484 27294 13661
8 - - 19156 11259 29322 21425 39487 31590 - - 17661 9874
10 - - 16414 6542 26579 16708 36744 26873 46910 37038 22076 12343
PSA4004
12 - - - - 23836 11991 34001 22156 44167 32321 28491 14811
14 - - - - 21093 7273 31258 17439 41424 27604 30906 17280
* Consult factory for complete data sheets with dimensional information.
C
CW - 0.5° NOTE: This graphic for
F PSA series only**.

91.5° The actuator shaft Spring Set Arrangement

is shown rotated
Air Stroke Spring Stroke
C E
Start Start
D F
D E End End
CCW 91°
0° 90° 0° 90° 8 Springs 10 Springs 12 Springs 14 Springs
Rotation Rotation
Pressure on Port “A”
Counterclockwise Clockwise
Rotates shaft CCW.
A
B (Breather)
** See page 21 for assembly part number and actuator graphic for the ESA 600, 900, and 1600.

22 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES DR PISTON ACTUATORS

Position Indicator Switches* NEMA 4 weather proof or NEMA 7 explosion-

Position Indicator Switches are available Position proof enclosures are available.
Indicator
toprovide an electrical contact closure at Switch Solenoid valves are available as 3-way valves
open and closed positions, normally used for spring return actuators or 4-way for double
for On-Off service. acting actuators. Four-way solenoids are
Independently adjustable SPDT switch equipped with a push button manual override.
elements are arranged so that each end Exhaust metering valves are available to
of the valve travel is indicated by separate control opening and closing speed of
circuit closures. the butterfly valve.
4-Way
Solenoid
Valve
Positioners* Declutchable Manual 3-Way
Pneumatic positioners are offered for Worm Gear Overrides Solenoid
modulating service. The standard signal Valve
Declutchable Manual
range is 3-15 psi, and may be Worm Gear Overrides
generated by temperature, Optional are available for size
pressure or level controllers. Gage Block 40 through 4004 DR actuators.
Especially applicable to spring return actuators,
Solenoid Valves* the handwheel can be engaged with a special
Solenoid Valves are used to declutch lever to hold the valve in its last
direct supply air to the actuator position until the actuator is
to open and close the butterfly returned to automatic operation.
valve at the command of an on/off Declutch
electrical signal. Series DR Actuator Seal Kit Lever
Direct attachment to the actuator through Seal Kits consist of all
a manifold eliminates all external piping. rubber seals, bushings Manual
Pressure connections are 1/4 NPT. Standard and guide bands required Handwheel Override
voltage is 120 VAC; other voltages are to repair either double acting
available on special order. or spring return actuators.

Series DR Actuator Accessory Part Number

Actuator Size E40 through E350 P500 through P4004
Valve Position Indicator Switch Assembly 2-SPDT.
24877-021 24877-026
Aluminum housing meets Nema 4, 6, 7, 8 & 9
2172371-04 (NEMA 4 120 VAC)
Solenoid Valves for Double Acting Actuators
2172371-07 (NEMA 7 120 VAC)
2172385-04 (NEMA 4 120 VAC)
Solenoid Valves for Spring Return Actuators
2172385-07 (NEMA 7 120 VAC)
Exhaust Metering Valves for Double Acting
5830-125 (2 Required)
Actuators with Solenoid Valve
Speed Control Valve Assembly for Spring
21604
Return Actuators without Solenoid Valve
Speed Control Valve Assembly for Spring
24876
Return Actuators with Solenoid Valve
Positioner Assembly, Pneumatic for Double 2061835-12-04 (Orientation 0) 2061836-12-04 (Orientation 0)
Acting Actuators 3 psi Close, 15 psi Open 2061835-11-04 (Orientation 3) 2061836-11-04 (Orientation 3)
Positioner Assembly, Pneumatic for Spring 2061837-12-04 (Orientation 0) 2061838-12-04 (Orientation 0)
Return Actuators 3 psi Close, 15 psi Open 2061837-11-04 (Orientation 3) 2061838-11-04 (Orientation 3)
Positioner Assembly, Electro Pneumatic for Double 2139067-12-04 (Orientation 0) 2139068-12-04 (Orientation 0)
Acting Actuators 4 MaDC Close, 20 MaDC Open 2139067-11-04 (Orientation 3) 2139068-11-04 (Orientation 3)
Positioner Assembly, Electro Pneumatic for Spring 2139069-12-04 (Orientation 0) 2139070-12-04 (Orientation 0)
Return Actuators 4 MaDC Close, 20 MaDC Open 2139069-11-04 (Orientation 3) 2139070-11-04 (Orientation 3)

Seal Repair Kit

Model No. E40 E65 E100 E200 E350 P500 P750 P1100 P2500 P4000
Part No. 2726023-01 2726023-02 2726023-03 2726023-04 2726023-05 17808-005 17808-006 17808-007 17808-008 17808-009

Note: De-clutchable manual override and dual stroke adjustment available for all actuators. Consult factory for pricing.
* Series DR Actuator auxiliary interface complies with NAMUR.
Consult factory for complete data sheets with dimensional information.

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 23
 DISTRIBUTED VALVES

BUTTERFLY VALVES STEM EXTENSIONS, TEES AND ADAPTERS

STEM EXTENSIONS Fabricated from carbon steel or stainless steel,

stem extensions are contained in a tubular housing.
Lengths from 3 inches to 16 feet are fabricated to order.
Torsional deflection of lengths over 16 feet requires special
design consideration and is available by special order only.

HOW TO ORDER HOW TO ORDER

2 in. through 12 in. 14 in. through 24 in.
(50 mm through 300 mm) (350 mm through 600 mm)

XXXXX - XXX XXXXX - XXX00

Base Part Length Base Part Length
Number in. (mm) Number in. (mm)

Description in. 2 to 4 5 to 6 8 10 12 14 16 18 to 20 24
(mm) (50 to 500) (125 to 150) (200) (250) (300) (350) (400) (450 to 500) (600)
Carbon Steel 23318 23319 23320 23321 23322 24529 24530 24531 24532
* Note: Consult factory for 30 in., 36 in., (750 mm, 900 mm) valve stem extensions.

HOW TO ORDER
3-way Adapter for Valves 2 in. through 12 in. (50 mm through 300 mm)
3-way adapter assemblies mechanically link two butterfly valves, XXXXX - XX X
to close one while opening the other, with a single actuator.
Base Part Valve
Valves are commonly connected in this manner by assembling to Orientation
Number Size
a flanged tee for diverting service.
3-way adapters for valves may be used with piston, cylinder,
diaphragm, or electric actuators, gear operators or manual
handles. Established See 2 in. (50 mm) 1
at Diagram 2 1/2 in. (65 mm) 2
Order Entry
3 in. (80 mm) 3
ORIENTATION 4 in. (100 mm) 4
5 in. (125 mm) 5
6 in. (150 mm) 6
8 in. (200 mm) 7
10 in. (250 mm) 8
12 in. (300 mm) 9
HOW TO ORDER
14 in. through 20 in. (350 mm through 500 mm)
14165 - XX X
Base Part Valve
Orientation
Number Size

See 14 in. (350 mm) 1

01 02 03 Diagram 16 in. (400 mm) 2
18 in. (450 mm) 3
20 in. (500 mm) 4

24 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES GENERAL TECHNICAL INFORMATION

Pressure Rating
Three drop tight pressure ratings are offered for DEMCO
Butterfly Valves. Normally, 200 psi shutoff is used in
butterfly applications. However, 285 psi shutoff is
optionally available for higher pressure applications.
For smaller actuator sizing, 50 psi valves offer reduced
torque.
For minimum torque, throttling valves, which do not
provide drop tight closure, are available.

Vacuum Rating
DEMCO Butterfly Valves will seal against 10 microns of
vacuum (29.9 inches of mercury). For reduced torque and WAFER VALVE CONNECTION
extended seat life, 50 psi discs are recommended for the
dry service conditions found in many vacuum applications.

End-of-Line Service
Lug body valves may be used in end-of-line service, with Marking
downstream piping removed. (Weld neck or socket Each valve is positively identified by marking and tagging
flanges, only, can be used for this service.) Since upstream per MSS SP 25.
pressure is excluded between the flange and the seat face
by the exclusive DEMCO flange seal, there is no effective Actuation
force to slide the seat downstream. DEMCO Lug Butterfly Positive latch handles, worm gear operators and automatic
Valves are recommended for liquid service up to 200 psi actuators are available and totally interchangeable on the
with downstream piping removed. DEMCO valve.
Lug body valves are recommended for isolation of pumps, The DEMCO top flange is dimensionally compatible with
control devices or other system components which may other competitive butterfly valves. With optional “utility
need to be removed for repair or replacement. top” stem, the DEMCO valve interchanges directly with
competitive valves, allowing valve replacement without
Lug valves are also suitable for installation at points from the need for new actuation.
which piping expansions may proceed. Such valves are
normally blanked with blind flanges, to protect the Installation and Maintenance
exposed seats, until new piping is attached. DEMCO Butterfly Valves are bi-directional, with identical
flow-way from either face. To install, simply close the
valve, insert between flanges and make up with studs or
cap screws. No regular maintenance or lubrication is ever
required. Disassembly is simple, for inspection or
replacement of parts.
Open the valve, remove handle or actuator, remove
tangential pins, pull out the stems and push the disc and
seat out of the body. Reassemble in reverse order, with a
small amount of general purpose non-hydrocarbon based
lubricant on the outside of stems, seat and disc flats.
Steel or cast iron flanges of either raised or flat-faced type
are suitable for use with DEMCO Butterfly Valves. Plastic
flanges are subject to damage at installation by over-
tightening the bolting and may deflect or “cup,” resulting
in flange leaks. Refer proposed plastic flange installations
to DEMCO Valve Quotations Department for review and
Upstream Disc recommendation.

Throttling discs, with no seat interference, do not provide

a stem seal. Stem O-rings are provided for this application.
Flange gaskets assist the O-rings in 2 in. through 12 in.
LUG VALVE CONNECTION WITH (50 mm through 300 mm) valves, and must be used with
DOWNSTREAM FLANGE REMOVED throttling discs, only.

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 25
 DISTRIBUTED VALVES

BUTTERFLY VALVES GENERAL TECHNICAL INFORMATION

This nomograph gives corresponding 10.000

values for the parameters of flow 6.000
rate, valve size, disc angle and 4.000
pressure drop of DEMCO Butterfly 2.000
Valves in 1.0 specific gravity water
service at 68°F (20°C). 1.000
600
The lower right-hand corner of the 400
graph with heavy line border
represents line velocities below 200
15 feet per second and is normally 100

PRESSURE DROP (psi) WATER AT 68°F

used for valve sizing in liquid 10°
60
applications. 15°
40

DI
Butterfly Valves are economical 20°

SC
600,000 20
throttling devices. Reliable

AN
25°

GL
30°
throttling can be attained at disc

E
4,000,000 400,000 35° 10
openings from 25° to 70°.

DE
40°
3,000,000 6

GR
300,000 45°

EE
4

S
50°
Sample Computation for Water

O
PR
2,000,000

PE
55°

ES
2

N
Water, with specific gravity of 200,000

SU
1,500,000 60°
1.0 and flow rate of 1200 gpm, 150,000

RE
1
65°
through 6 in. (160 mm) Butterfly

DR
1,000,000 0.6

O
100,000 70°
Valve. 0.4

P
800,000 36” 75°

TH
Required: Pressure drop at full and 80,000 90°

RO
600,000 0.2
75° disc opening.

UG
60,000
30”

H
Project horizontally from 1200 gpm 400,000 0.1

FU
to 6 in. (150 mm) valve curve. 40,000

LL
300,000 24” 0.06

O
Project vertically upward to full 30,000 0.04

PE
N
20”
open valve curve, then horizontally 200,000

VA
20,000 0.02
to read 0.35 psi pressure drop.

LV
150,000 18”

E
Continue upward projection to 15,000 0.01
16”
intersect 75° opening curve, then 100,000
14”
horizontally to read 0.8 psi pressure 80,000 10,000
12”
drop. 60,000 8,000
6,000
10”
Sample Computation for Air 40,000
Air, with density of 0.217 lbs./cu. ft., 30,000
4,000
8”
flow rate of 40,000 cu. ft./hr., 3,000
through 5 in. (125 mm) Butterfly 20,000 6”
FLOW RATE (cu. ft. per hr.)

Valve. 2,000
15,000
Required: Pres-sure drop through 1,500
full open valve. 10,000
FLOW RATE (gpm)

5”
Disregarding change in gas 8,000 1,000
condition by pressure drop across 6,000 800
4”
valve, proceed from 600
VA

40,000 cu. ft./hr., as in liquid 4,000

LV

400
computation, to read
E

3,000
SI

3”
ZE

15 psi pressure drop. 300

-I
NC

Convert pressure drop from water 2,000

HE

2 1/2”
200
S

to air by multiplying this value 1,500 2”

times the ratio of 150
air-to-water densities: 1,000
800 100
80
600
0.217
15 psi x = 0.052 psi 60
62.4 400
40
300
30
To determine pressure drop for any 200
fluid, multiply value obtained from 20
150
the nomograph by the quotient 15
of the fluid density, in pounds per 100
cubic foot, divided by 62.4. 10
GAS LIQUID

26 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES GENERAL TECHNICAL INFORMATION

General Dimensions 2 in. through 20 in. (50 mm through 500 mm)
Valve Size in. 2 2 1/2 3 4 5 6 8 10 12 14 16 18 20
Dimensions
(mm) (50) (65) (80) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500)
2.07 2.47 3.07 4.03 5.05 6.07 7.98 10.02 12.00 13.25 15.25 17.25 19.25
A-Schedule 40 (Except Slip On) (53) (63) (78) (102) (128) (154) (203) (255) (305) (337) (387) (438) (489)
Flange ID* (Slip On) 2.44 2.94 3.57 4.57 5.66 6.72 8.72 10.88 12.88 14.14 16.16 18.18 20.20
(62) (75) (91) (116) (144) (171) (221) (276) (327) (359) (410) (462) (513)
2.65 3.15 3.78 4.78 5.84 7.03 8.96 11.09 13.09 14.14 16.16 18.18 20.20
B-Seal Diameter
(67) (80) (96) (121) (148) (179) (228) (282) (332) (359) (410) (462) (513)
3.62 4.12 5.00 6.18 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00
C-Raised Face Diameter
(92) (105) (127) (157) (186) (2160 (270) (324) (381) (413) (470) (533) (5840
4.12 4.87 5.37 6.87 7.75 8.75 11.00 13.37 16.12 17.20 19.27 21.43 23.60
D-Valve Body Diameter
(105) (124) (136) (174) (197) (222) (279) (340) (409) (437) (489 (544) (599)
3.12 3.62 4.25 5.25 6.31 7.46 9.43 11.56 13.56 15.14 17.04 19.06 21.08
E-Seat OD
(79) (92) (108) (133) (160) (189) (240) (294) (344) (385) (433) (484) (535)

F- Threaded ASME Socket & Slip On 3 3/4 4 1/8 4 1/4 4 3/4 5 1/8 5 3/8 6 1/16 6 5/8 7 5/8 7 1/2 9 9 13/16 10 11/16
End-to- Weld End ASME 6 3/4 7 3/8 7 3/8 8 1/8 9 1/4 9 1/4 10 9/16 10 3/4 12 1/4 13 14 15 7/16 16 5/16
End Grooved 6 5/8 7 3/16 7 1/8 7 7/8 8 15/16 8 7/8 10 3/16 10 5/16 11 13/16 - - - -
G-Seat ID 2 1/4 2 13/16 3 5/16 4 3/16 5 1/16 6 1/16 7 15/16 10 11 15/16 13 5/32 15 7/32 17 5/32 19 5/32
1.467 2.144 2.743 3.601 4.582 5.624 7.428 9.382 11.35 12.86 14.72 16.61 18.53
H-Disc Chord**, Resilient Seated Valves
(37) (54) (70) (91) (116) (142.8) (189) (238) (288) (327) (374) (422) (471)
J-Outside- 3.25 3.62 3.75 4.00 4.12 4.25 4.81 5.12 5.75 5.75 6.87 7.56 8.31
to-Outside
ASME 150
(83) (92) (95) (102) (105) (108) (122) (130) (146) (146) (174) (192) (211)
Through- Resilient Seated-sq. in. 2.33 3.92 5.93 10.01 14.98 22.09 39.43 61.52 89.54 111.2 150.5 186.1 238.1
put Area % Sch. 40 pipe 70% 82% 80% 79% 73% 76% 79% 78% 80% 82% 85% 83% 87%
Number of Studs 4 4 4 8 8 8 8 12 12 12 16 16 20
Number of Cap Screws 8 8 8 16 16 16 16 24 24 24 32 32 40
Size of Studs or Cap Screws-Threads per in. 5/8 -11 5/8 -11 5/8 -11 5/8 -11 3/4 -10 3/4 -10 3/4 -10 7/8 -9 7/8 -9 1 -8 1 -8 1 1/8 -7 1 1/8 -7
Length of Studs 5 5 1/2 5 1/2 5 3/4 6 1/2 6 1/2 7 7 1/2 8 1/4 8 1/4 10 10 1/2 11 3/4
Length of Cap Screws (in.) 1 1/2 1 1/2 1 1/2 1 3/4 1 3/4 2 2 1/4 2 1/4 2 1/2 2 1/2 3 1/4 3 1/2 4
* DEMCO Butterfly Valves are designed to seal without flange gaskets against flange faces with inside diameters between slip-on flange bore and
Schedule 40 weld neck flange bore.
** 2 in. through 12 in. (50 mm through 300 mm) disc will open into Schedule 80 pipe ID.

General Dimensions
24 in. through 36 in. (600 mm through 900 mm)
Valve Size in. 24 30 · 36 ·
Dimensions
(mm) (600) (750) · (900) ·
23.25 29.25 35.25
A-Standard Flange ID (Except Slip On) J
(591) (743) (895)
24.25 30.00 35.94
B-Seal Diameter D
(616) (762) (913)
27.25 - -
C-Raised Face Diameter
(692)
28.23 34.05 40.49
D-Valve Body Diameter
(717) (865) (1028)
25.49 31.47 37.63
E-Seat OD
(647) (799) (956) C
18.00 16.75 18.63
F-End-to-End Weld End, ASME
(457) (425) (473) E
G-Seat ID 23 1/4 29 5/16 35 5/16 B
22.57 28.67 34.70 G F
H-Disc Chord
(573) (728) (881) A
9.75 10.75 12.63
J-Outside-to-Outside, ASME
(248) (273) (321)
Number of Studs 20 * ** H
Number of Cap Screws 40 56 64
Size of Cap Screws-Threads per in. 1 1/4 -7 1 1/4 -7 1 1/2 -6
Length of Studs 12 1/2 * **
Length of Cap Screws 4 5 ***
Throughput sq. in. 352.4 546 800
Area % std. pipe 88% 81% 82%

* 24 Studs 1 1/4-7 x 15 1/2; 8 capscrews 1 1/4-7 x 5.

** 28 Studs 1 1/2-6 x 18 1/2; 8 capscrews 1 1/2-6 x 5 1/2.
*** 56 Screws 1 1/2-6 x 6; 8 screws 1 1/2-6 x 5 1/2
· Dimensions are for ASME Class 150 Series A flanges or MSS SP-44 flanges.
Consult factory for ASME Class 125 flanges.

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 27
 DISTRIBUTED VALVES

BUTTERFLY VALVES GENERAL TECHNICAL INFORMATION

Flow Coefficients (CV)

Valve Size in. (mm)
Degree 2 2 1/2 3 4 5 6 8 10 12 14 16 18 20 24 30 36
Open (50) (65) (80) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) (750) (900)
90° 145 225 325 590 1,125 1,950 3,250 5,000 7500 10,000 13,600 18,000 22,600 30,000 47,000 70,000
80° 115 175 260 510 1,000 1,650 2,725 4,300 6,050 8,100 11,500 14,300 18,000 25,000 38,000 60,000
75° 95 135 215 410 830 1,350 2,200 3,600 5,000 6,700 9,500 12,100 15,000 21,000 31,500 48,000
70° 70 105 160 305 625 1,030 1,750 2,750 4,050 5,100 7,100 9,200 11,500 16,500 25,500 39,500
60° 53 83 125 235 490 800 1,300 2,150 3,100 4,100 5,100 7,100 8,700 11,750 18,000 28,000
50° 27 42 63 120 250 410 700 1,150 1,600 2,200 2,650 3,700 4,600 6,100 9,700 15,000
40° 17 26 38 73 155 250 420 670 1,000 1,300 1,700 2,300 2,800 3,800 6,000 9,200
30° 9 15 22 42 88 145 250 390 550 750 900 1,250 1,600 2,200 3,500 5,300
25° 6 10 15 28 60 98 170 260 380 500 650 900 1,125 1,500 2,300 3,500

CV values, given above, may be employed in the formula: Water Hammer

Water hammer is a series of shocks in a piping system
Q = CV x D P x 62.4 caused by rapidly stopping the flow of fluid in that system.
D Although it is difficult to measure pressure spikes caused
Where: by water hammer shock with ordinary equipment,
Q = Gallons per minute of flow through the valve. maximum obtainable pressures caused by instantaneous
DP = Pounds per square inch pressure drop across the valve. valve closure can be approximated by the following
D = Density of fluids in pounds per cubic foot. formula:

Pressure drop is computed by rearranging the formula to:

Pressure (max) = Interrupted velocity (fps) x 58 psi/fps
2
Q xD
DP = 2
CV x 62.4
In other words, pressure increases 58 psi for each foot per
Sample Computations second of interrupted pipe line velocity.
What is the flow rate of water at ambient temperature A pipe carrying fluid at 15 feet per second velocity will
through a 4 in. (100 mm) butterfly valve 70° open when have an instantaneous pressure increase of 870 psi under
pressure drop across the valve is 0.5 psi? (Density of water at rapid closure conditions.
68°F is 62.4 pounds per cubic foot.)
The effects of water hammer are seen in a butterfly valve
as bent disc and stems, broken bodies or both.
Q = CV x D P x 62.4 Water hammer can be minimized or eliminated by slowing
D valve closure time in accordance with the following
formula:

0.5 x 62.4 0.14Q

= 305 x Time seconds =
D S (P)
Where:
Q = Flow in gpm.
= 305 x 0.707
S = Upstream pipe size in sq. ft.
P = Pressure rating of the valve in psi.
Q = 215.6 gallons per minute

What is the pressure drop across an 8 in. (200 mm) butterfly Generally, a closing time of 6 to 8 seconds is sufficient to
valve fully open, flowing 2000 gallons per minute of solvent eliminate water hammer.
with a density of 55 pounds per cubic foot?
2
Q xD
DP = 2
CV x 62.4

2
(2000) x 55
= 2
(3250) x 62.4

D P = 0.33 pounds per square inch

28 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES GENERAL TECHNICAL INFORMATION

Cavitation Data Torque

Liquid flow is accelerated as it passes through a valve in such The torque (turning effort) required to operate a given
a manner that pressure is decreased below the vapor butterfly valve is determined by two factors: friction of
pressure and bubbles form. Immediately downstream of the disc and seat due to interference, and dynamic forces of
valve, velocity decreases while pressure increases and the flow through the valve which tend to open or close the
bubbles collapse causing noise and possible mechanical valve. Actuator torque output must meet or exceed the
damage to the valve and piping. This is called cavitation. maximum torque requirement of the valve.
Cavitation can often be identified by the noise of the Normal Wet Opening Torque requirements due to
collapsing bubbles which sounds like gravel flowing in the interference are tabulated below. Dry service will
pipe. increase opening torque significantly. Consult factory for
Generally butterfly valves operate with high flow capacities dry service torque requirements
and at low pressure differentials and are not particularly The disc of a butterfly valve, in partially opened
susceptible to cavitation. condition, is subject to “lift” forces from passage of fluid
When butterfly valves are used as control valves, one can over its surfaces. This effect is analogous to an airplane
assure that cavitation will not occur by applying the wing and results in an unbalanced turning force on the
following simplified formula: disc. Dynamic torque is proportional to pressure drop
through the valve and may become significant in some
applications.
DPmax = K C (P1 - PV ) Dynamic torque typically is a maximum at about 70° disc
opening. Under high differential pressure conditions,
Where: such torque may exceed the design strength of stems,
connections or actuators. The curves at right may be used
D Pmax = Differential pressure across the valve. to calculate dynamic torque for DEMCO Butterfly Valves
KC = Cavitation constant and should be consulted in any case where high
differential pressure may occur during operation of a
(approximately .35 for butterfly valves).
valve.
P1 = Inlet pressure (psia).

PV = Vapor pressure of the flowing liquid (psia). 10,000

DYNAMIC TORQUE, inch - pounds per psi pressure drop

Example:
What is the maximum pressure drop possible through a
butterfly valve at 100 psig inlet pressure with water at VALVE SIZE - INCHES 30”
68°F (.339 psia vapor pressure)? 1,000
24”

20”
DPmax = K C (P1 - PV )
18”
16”

Under the above conditions it is possible to take a 40.03 psi 14”

pressure drop across the valve before cavitation will begin. 100
12”

10”

8”

6”

10
5”

4”

1.0
20 30 40 50 60 70

DISC OPENING, degrees

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 29
 DISTRIBUTED VALVES

BUTTERFLY VALVES STANDARD MATERIAL DATA

Bodies
NE-C NF-C NF-C NE-I NE-D NE-I NE-T
Description
14 - 24 30 & 36 Sanitary
See page 6 for Assembly Part Number
A395 (60-40-18) * Lug Lug Wafer/Lug Wafer Wafer Wafer/Lug
Ductile Iron
ENC Coated Wafer Wafer/Lug
A48 (Class 20) Wafer Wafer
Gray Iron
A126 (Class B) Wafer
Bronze B148 (952) C/F Wafer/Lug Wafer/Lug Wafer/Lug
Steel A216 (WCB) * Lug Wafer/Lug Wafer/Lug
Stainless Steel A351 (CF8M) Wafer/Lug Wafer/Lug Wafer/Lug
Aluminum B179 (ZC-81A) Wafer Wafer Wafer

Discs
Ductile Iron/
A536 (65-45-12) • • • • •
Nickel Plated
Ductile Iron/
A536 (65-45-12) • • • •
PVF Coated
Aluminum B148 (954) • • •
Bronze B148 (955) • •
316 SS A743 (CF8M) • • • • • • •
Monel ** A494 (M30C) • • • •
Alloy 20,
A743 (CN-7M) • • • •
29 NI-20 Cr
Hastelloy C **
A494 (CW-2M) • • • •
61 NI-17 Mo-17 Cr

Stems
416 SS QQ-S-764-B • • • • • •
316 SS AMS 5648 B • • • • • • •
17-4 PH SS AMS 5643 • • • • • •
Monel ** B164 (Class A) • • • • •
* Conforms to USCG Marine requirements as outlined in 46 C.F.R., part 56.
**See material trademark on page 35. Consult factory for special material requirements.

Seats See pages 5, 6 and 7 for seat material description and part Hypalon* is compounded for chemical resistance and is
number scheme for available options for different valve series. excellent in acids and hydrocarbons.
Buna N is a general purpose elastomer compounded for 0°F to +180°F Same as CP
maximum hydrocarbon or petroleum resistance. Viton* is excellent at elevated temperatures and also in harsh
0°F to+180°F Same as Nitrile, Hycar*, NBR chemical environments. Viton is not suitable for hot water or
steam. +20°F to +300°F Same as Fluoroelastomer
General Service EPT is recommended for water service. Resistance
to saturated steam to 275°F is excellent. EPT is suitable in alkaline Natural Rubber is generally superior to other elastomers in
solutions. EPT is not suitable for oil or hydrocarbons. abrasion resistance and is recommended for dry material
Peroxide cured +20°F to +275°F handling. Use in oils and solvents is not recommended.
-30°F to +150°F
Food Grade EPT is formulated in compliance with FDA guidelines
published in the Code of Federal Regulations, Title 21, paragraph Fluorosteam seats offer heat and chemical resistance to
177.2600. This material is suitable for food service, except milk hydrocarbons and hot water or saturated steam. Maximum
and edible oils. Peroxide cured +20°F to +275°F temperature capability is dependent on fluid resistance,
Sulfur cured -30°F to +225°F Same as EPDM, Nordel* pressure and flow rates. +20°F to +275°F
Black Neoprene complies with FDA guidelines and is principally ETM-30230 is compounded to combine many of the better
recommended for food and beverage service. It is resistant to media properties of Buna-N, EPT or Neoprene for service in
vegetable oils, brine and oxygen. hydrocarbons, gasoline, solvents, animal oils and vegetable
0°F to +180°F Same as Polychloroprene, CPE oils with a wide temperature range (–30°F to 230°F). Abrasion
resistance is equal to Buna-N. Resistance to hydrogen sulfide
White Neoprene complies with FDA guidelines and offers chemical
and carbon dioxide are superior to Buna-N. -30°F to +230°F
resistance comparable to black neoprene but uses fillers other than
carbon black to provide white coloration. Physical properties are NEI-T Teflon* SEAT is Buna-N, or EPT elastomer bonded to
not as good as black neoprene, and white neoprene should be a virgin TFE covering providing an inert, aseptic non-stick
used only when black cannot be tolerated. Storage should be surface which is excellent for sanitary food service
under low light conditions to prevent discoloration. 0°F to +180°F applications. 0°F to +250°F
Other Seat Elastomers are available for special applications. Consult factory. * See material trademark on page 35.

30 DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES MATERIAL SELECTION GUIDE

The following application data is for use in determining the available material most likely to give satisfactory service and
is not meant to imply any type warranty. However, certain factors such as temperature, concentration and combinations
of chemicals may affect the fluid resistance of any material. In questionable applications, testing is always the most
positive way to determine suitability. Some materials are available in certain valve sizes and series only.
APPLICATION E - Excellent STEM & DISC SEAT

n
Iro
CODE G- Good

e
til

ze
uc

on

er
F- Fair

bb
Br
ed

30
Ru
at

um

e
y
U- Unsatisfactory

en

02
Pl

on
20

llo

al
N N
in
SS

SS

el

-3
pr
l

al
te

ur
ke

n
m

na
on

M
to
llo

eo

yp
as

F
6

at
lu
ic

PV

Bu
41

31

EP

ET
M

Vi
N

N
Acetaldehyde U U E E U E E G G F U F E U -
Acetic Acid-Crude U U E F U E E - G E E - - - -
Acetic Acid-Pure U U E F F E E E G E E - - - -
Acetic Acid-10% U U E F U E E - G E E - - - G
Acetic Acid-80% U U E F U E E - G E E - - - -
Acetic Acid-Anhydrite U U E F U E E U U E E U F F U
Acetone G G E E E E E U U U U U E F U
Acetophenone U U G E U - - F U - - - E - U
Acetylene G E E E E E U - G F F E - F G
Acrylonitrile G G E E E - - U U F F U U U -
Air (dry) E E E E E - - - E E E E G - -
Alcohol-Amyl F G E E E E - E F F G G E G E
Alcohol-Butyl F G E E E E E E F G G E F F -
Alcohol-Ethyl U - E E E E E E G G G G G G E
Alcohol-Methyl U - E E E E E - F E E F E G -
Alum-Ammonium U - G - - - - - G G F G - F -
Alum-Chrome U - G - - - - - G G G G - F -
Alum-Potassium U G - - G - - - G G F E G - -
Alumina G G G G G E E - E F G G E E -
Aluminum Chloride U U F G U E - E G G G E E G G
Aluminum Fluoride U - G G - E - E G G G G E G G
Aluminum Hydroxide U - G G G - - E G G - G G - -
Aluminum Sulphate U G G - U G E - E E E E E E -
Amines U F E G - E U - U U U U F - -
Ammonia, Anhydrous F - E E U - E E G G U U G U U
Ammonia Solutions F G E G U E E - G G U U G U U
Ammonium Chloride 50% 180°F U F G G U E E E E E E E E E G
Ammonium Hydroxide F G E F U E E E U E E G E U F
Ammonium Nitrate 5% 60°F F G E U U E E E E E G E E G G
Ammonium Phosphate U G E G U E E E E E E E E G G
Ammonium Sulphate 90% 180°F U F G G U G G E E E E E E G -
Amyl Acetate F G E G G E U F U U U U G U U
Amyl Chloride F G E G E E E E U U U - U U -
Aniline 90% 70°F F G G G U E E F U U U F F U U
Aniline Dyes F G E E F E E - U F F G - - U
Antimony Chloride U - - G - - E - G G G E - - -
Arsenic Acid U G G G U E - E E E E E G G G
ASTM Oil #1 F E E E E E E - E G G E U U -
ASTM Oil #3 F E E E E E E - E U U E U U -
ASTM Ref. Fuel A F E E E G E E - E G G E U U E
ASTM Ref. Fuel B F E E E G E E - G F F E U U E
ASTM Ref. Fuel C F E E E G E E - G F F E U U -
Asphalt E E E E E E E - G - - E U U E
Barium Carbonate 60°F U - G G G - E E E E - - E - -
Barium Chloride U - G G F - E E E E E E E E E
Barium Hydroxide F E E G U E - E E E E E E G E
Barium Sulphate 60°F U - E G G - - E E E - - E - E
Barium Sulphide F E G F U E - E E E U - - U -
Beer (Beverage) U E E E U E E E G G E E E G G
Beet Sugar Liquors F E E E F E - - E E G E - G -
Benzaldehyde F E E G E E - E U U U U E U U
Benzene (Benzol) 70°F F E E G E E E G U U U G U U U
Benzoic Acid 5% 70°F U G E G G E E E U U U E U U -
Black Sulphate Liquor F G E - F E - - G G G E G F -
Bleaching Powder-Wet U G G - U E - - G E F - - F -
Borax (Sodium Borate) U F E E U E E E G E E E E G G
Boric Acid 5% 200°F U F E G F E E E E E E E E G G
Brine (Acid) U - G G G - - E E G G - E U -
Brine-Chlorinated - - U G G - - - - - - G G - -
Bromine-Gas U U U F - U E E U U U E U U -
Bromine-Water U U U F - U E E U G G E U U -
Butadiene F G E E G - E E F - G G - U U
Butane-Butylene G E E E E E E E G G G E U U G
Butyl Acetate G E E E E E E U U U U U U U U
Butyric Acid 5% 70°F U G E G G E E - U U U G G U -
Calcium Bisulfite U G E U U G - E E E E E U U -
Calcium Carbonate 60°F F - G E G - E E E E - E - - -
Calcium Chlorate 20% 160°F - G E G U E E E - E E - - - -

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 31
 DISTRIBUTED VALVES

BUTTERFLY VALVES MATERIAL SELECTION GUIDE (Continued)

Stem & Disc Seat

n
Iro
APPLICATION E - Excellent

e
til

ze
CODE G - Good

uc

on

r
D

be
Br
d

ub
F - Fair

te

30
um

e
la

lR
en

02
on
20

llo
lP

-N
in

a
SS

SS

-3
U - Unsatisfactory

pr
e

al
te

ur
ke

n
m

na
on

M
to
llo

eo

yp
as

F
6

at
lu
ic

PV

Bu
41

31

EP

ET
M

Vi
N

N
Calcium Chloride F G G G E G E E E E E - - - E
Calcium Hydroxide 50% 175°F F E E E U E E E G E E E - - G
Calcium Hypochloride - G G - - G - - U U E E - U F
Calcium Sulphate 90% 60°F F E E G E E - E F F - E - - -
Calgon F - E - - E - - E E - E - - -
Caliche Liquor U - E - - E - - E E E E E E -
Cane Sugar Liquors F E E G E E - - E E - - - - G
Carbon Dioxide (Dry) F E E - E E - E E G G E - G G
Carbon Disulfide U - E G G - - G U U U E U U -
Carbon Tetrachloride (Dry) U G G E G E - E U - - E - - F
Carbonic Acid U G E E - E E E G E E E E E G
Caster Oil G G E E G E E E G E E E G G G
Caustic Solutions 34% 200°F U G E F U E E - F F F E G U F
China Wood Oil (Tung) F - E E F E E - E E G E U U -
Chlorine Gas-Dry 70°F U F G G G G E E U U G E F U -
Chlorobenzene 90% 70°F F E G G G E - E U U U G U U U
Chloroform 70°F F G E E G E - E U U U E U U -
Chlorosulfonic Acid 10% U U G F G U E F U U U U U U -
Chocolate - - - - - - - - E U - - - - -
Chromic Acid 5% 70°F U G G F U E - E U U E E U U -
Citrus Acid 5% 150°F U F E G F E E E E E E E E F E
Coconut Oil (Food) U U E G G E - E E F F E F U -
Coffee (Food) U U E G F E - E E E E E E E -
Copper Chromate - - E - - - - - - - - - - - -
Copper Sulphate 80% 175°F F G E F U E - E E E E E E E -
Corn Syrup - - E - - - - - - - - - E - -
Cottonseed Oil G E E E E E E E E F G G F U G
Creosol U F E E - E - F U U U F U U -
Creosote E E E E G E E - G U F E U U U
Cresylic Acid U G E G G E - G U U U E U U -
Crude Oil G G E E E E E - E - - E U U E
Cyclohexane F E E G G E - E U U U E U U -
Dextrose (Food) U U E - - E - - E - - - - - -
Diacetone U - E - E - - U U U U U E U -
Diamylamine F E E - E E - - G F - U - G -
Dichlorethene U - G G G G - F U U - G U - U
Diesel Fuels E E E E G E E E E F F E U F E
Diethyl Amine F E E G E E - U G F F U F U -
Dimethane Sulfide - - - - - - - - - - F U G - -
Dowtherms G E E E G E - - U G G E - - U
Drilling Mud G - E E G - - - E F E E - G E
Ethers U - G G G E E F U U U F F U -
Ethyl Acetate F G E E G E E F U U U U G U U
Ethyl Chloride 5% 60°F F G E G E E E E E G G G G G G
Ethyl Glycol G E E E E E E E E G E E E E -
Ethylene Dichloride U - G G G - - E U U U F U - U
Ethylene Oxide G G G G U E - U U U U U F U U
Ferric Chloride U U U U U - U E E G G E E E G
Ferric Nitrate (pH7+) 5% 60°F U - G F U E - E E E E E E E E
Ferric Sulphate 5% 60°F U - E E U - - E E E E E E E E
Ferrous Sulphate F G G - U E - E E E - E E E -
Fluorine 70°F U U F G U G - E G F G G F - -
Fluorosilicic Acid U F G G F E - E E G E - - G -
Formaldehyde 70°F U G E G E E E G F - E E - F F
Formic Acid 5% 150°F U G E G G E E E G E E E E E G
Freon 11 F E E E E E - E G G E G U - -
Freon 12 F E E E E E - E G G U U U - F
Freon 22 F E E E E E - E U - E U E - F
Freon 113 F E E E E E - - G G E G U U F
Freon 114 F E E E E E - - G G F F U - F
Fructose - - E - - - - - - - - - E - -
Fruit Juices (Food) 70% U U E E U E E - E E F E G G
Fuel Oil F E E E E E E E G F F E U U E
Furfural F E E G G E E U U U U U F U U
Gallic Acid 5% 200°F U - E G - E E F G G G E G E -
Gasohol F G E - G - - E U - - G U - U
Gasoline-Regular G E E E E E E E G - G E U U E
Gasoline-Unleaded F E E E E - - E U - - E U - G
Gelatin (Food) U U E G G E - - E E E E E E E
Glucose U F E - E E - E E E E E E E E
Glycerine/Glycerol 70°F F E E G G E E E E E E E E E E
Heptane F G E G E E - E E G G E U U -
Hexane F G E G E E - E E G G E U U E
Hydraulic Oils F G E E E E - - G F E E U U G

32 ® CT-DEM-NE/NF/NEI
DEMCO 04/07 NP-3M
 DISTRIBUTED VALVES

BUTTERFLY VALVES MATERIAL SELECTION GUIDE (Continued)

Stem & Disc Seat

n
Iro
APPLICATION E - Excellent

e
til

ze
CODE G - Good

uc

on

er
D

bb
Br
ed
F - Fair

30
Ru
at

um

e
y

en

02
Pl

on
20

llo

al
-N
in
SS

SS

el

-3
U - Unsatisfactory

pr
l

al
te

ur
ke

n
m

na
on

M
to
llo

eo

yp
as

F
6

at
lu
ic

PV

Bu
41

31

EP

ET
M

Vi
N

N
Hydrobromic Acid 200°F U U U U U U E E U U E E E E -
Hydrochloric Acid 10% 60°F U U U F U U E E F G G E G - -
Hydrochloric Acid 20% 60°F U U U U U U E E F G G E - - -
Hydrochloric Acid 35% 60°F U U U U U U G G F G G E - - U
Hydrocyanic Acid U - G F U E E E G G E E G G -
Hydrofluoric Acid 48% U F U F U F E E U U E E - - -
Hydrofluoric Acid 60% U U U U U F E E G U G G E G -
Hydrofluoric Acid 100% U U U U U F E E U U U F - - -
Hydrofluosilicic Acid 5% 70°F U G G G E G E G G G E E E E -
Hydrogen F G E E F E - E E E E E E G -
Hydrogen Peroxide 90% U F G G U G E E U U G G F U G
Hydrogen Sulfide-Dry F F E G F G E E F - G G E G G
Hydrogen Sulfide-Wet F F G F F E - E - - G G G U F
Iodine Solution U U U U U U E E F U G E G F -
Iso-Octane F E E E E E E E E G G E U U G
Isopropyl Alcohol F E E E E E E - G F E E E E G
Isopropyl Ether F E E E E E E - G F F U U U -
Kerosene E E E E E E E E E G U E U U E
Lacquer Solvents F E E E E E E - U U U U U U U
Lactic Acid 5% 70°F U F G G U E E U G E E E G G -
Lard Oil 70°F G - E G G E E E E F U E U U E
Lemon Oil U F E E E E E E G F - - - - -
Linseed Oil F E E E E E E E E G G E U - -
Lubricating Oil E E E E E E E E E F G E U U E
Magnesium Chloride 4% 75°F F F G G F E E E E E E E E E E
Magnesium Hydroxide F E E G G E - E G E E E E G G
Magnesium Sulphate 5% 120°F F G E E E E E E E E E E E G E
Mecuric Chloride 3% 60°F U U F U U F E E E E E E E E E
Mecuric Cyanide U - E U U E E F G F F F G - F
Mercurous Nitrate (pH7+) U - G U U E E E F F - - - - -
Mercury E E E E U E E E E E E E E E E
Methyl Acetate F G E - - E - - U U U U G U U
Methyl Acetone F E E - E E - - U U U - - U -
Methyl Cellosolve F E E E E E - E U U U U G U -
Methyl Chloride G G E G E E - E U U U G F U -
Methyl Ethyl Ketone (MEK) E E E - E E - U U U U U E U U
Milk (Food) U U E F U E E E E E - E U - -
Mineral Oil F - E E G E E E E G G E U U E
Molasses (Food) U U E - U E - G - E - - E - -
Naphtha F E E G G E E E G U U E U U G
Naphthalene F E E G G E - E U U U E U U -
Natural Gas (Methane) G E E - E E - - E E E E U F E
Nickel Ammonium Sulphate U - E F U - - - - E - - - - -
Nickel Chloride U - G G U G E E E E E E E E -
Nickel Sulphate 10% 60°F U - E G G E E E E E E E E G -
Nitric Acid 10% 70°F U - G U U G G U U G E E G U U
Nitric Acid 30% 70°F U - G U U G G U U F E E G U U
Nitric Acid 60% 175°F U - G U U G G U U U U E U U U
Nitric Acid 70% U U G U U G G U U U U E U U U
Nitrobenzene U - E G - E - F U U U G U - U
Oils and Fats E E E G E E - - E - - U U - E
Oils, Fish U G E - F E - - G E F U U - E
Olecic Acid 100°F U F G G G E E E F G G G - U G
Oleum (Fuming Sulfuric Acid) U U F - - G G - U U U E U U U
Oxalic Acid U F G F F G G F G G G E G G F
Oxygen E E E E E E - E G E E E E - G
Ozone U G E - - - - E U F E E E U G
Palmitic Acid U G E G G E - E E G F G G F G
Perchlorethylene F G E G G E - E F U U E U U F
Petroleum-Refined G - E E E - - E E G E E U U E
Petroleum-Sour U G G G F G E E F - E G U - G
Phenol U - E E G E E E U U U G - U F
Phosgene - - E - - - - - G U U G U U -
Phosphoric Acid 10% 70°F U F G F U G E E G G G E G F -
Phosphoric Acid 25% 70°F U U G F U G G E F G G E E U -
Phosphoric Acid 75% 70°F U U G F U - F E U G G G E U -
Phosphorous Oxychloride U - - - - - - - - - - - - - -
Pickling Sol. (20% Nitric-4% HF) U - G G - - - - U U U G F U U
Picric Acid 80% 70°F U - G U - E E E G E E G E G -
Polyethylene Glycol Dimethyl Ether (Selexol) - - - - - - - - - - - U G U -
Potassium Chloride U - G G E E - E E E E E E E E
Potassium Cyanide F G G G U E - E E E E E E E E
Potassium Hydroxide 5% 70°F F G E E U E E G E G E G E G -
Potassium Nitrate 6% 68°F F G E G F E E E E E G E E E E

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 33
 DISTRIBUTED VALVES

BUTTERFLY VALVES MATERIAL SELECTION GUIDE (Continued)

Stem & Disc Seat

n
Iro
APPLICATION E - Excellent

e
ti l

ze
CODE G - Good

uc

on

er
D

bb
Br
d
F - Fair

te

30
Ru
um

e
la

en

02
on
20

llo
lP

al
N N
in
SS

SS

-3
U - Unsatisfactory

pr
e

al
te

ur
ke

n
m

na
on

M
to
llo

eo

yp
as

F
6

at
lu
ic

PV

Bu
41

31

EP

ET
M

Vi
N

N
Potassium Phosphate U - G G F - - - E E - E - - -
Potassium Sulphate 7% 180°F F G E E E E - E E E G E E - E
Potassium Sulfide U G E F U E - E E G G G G G -
Potassium Sulfite U - E - - E - - E G G E E G -
Propane F E E E E E - E E G G E U U E
Resins and Rosins U E E G E E E - F F F E - F -
SAE #10 Oil G - - - E - - - E - E E U - E
Sea Water 70°F U F G E E G E E E E E G E F -
Sewage U G E G G E - E E E E E G F -
Silicate Ester Synthetic Oil - - - - - - - - - G E E U - -
Skydrol 500 G E E - E E - - U U U U E U U
Soap Solution (Stearate) 70°F U F E E E E E E E E E E E F E
Sodium Acetate 5% 75°F U F E G G E E E G G U U E E -
Sodium Aluminate U - E G G E - - E E G E G G -
Sodium Bisulfate U F E - - E - E E E E E E E E
Sodium Carbonate 80% 60°F U G E E G E E E E E E E E E E
Sodium Chloride 30% 180°F U F E E E E E E E E E E E E E
Sodium Cyanide U - G U U E - E E E E E E E -
Sodium Fluoride 5% 60°F U - G G F - E E E E G E G G -
Sodium Hydroxide 5% U G E G F E E G G F E G E E -
Sodium Hydroxide 20% U F E E F E E G G U E G E E -
Sodium Hydroxide 50% U F G G U E E E G U G F G G -
Sodium Hydroxide 70% U U F F U G G G F U U U G F -
Sodium Hypochlorite 5% 60°F U - G G U G E E F U E E G F G
Sodium Nitrate 30% 60°F U G E G G E E E G G E E E G G
Sodium Perborate U G G G G - - - G G G E E G -
Sodium Peroxide U G E G U - - E G G G E E G -
Sodium Phosphate 5% 60°F U G E G F E E E E G E E E E U
Sodium Silicate U G E G G E E E E E E E E E -
Sodium Sulphate 80% 60°F U G E G G E E E E E E E E G E
Sodium Sulfide 70% 70°F U G E - - E E E E E E E E G -
Sodium Sulfite 5% 70°F U - E G U E E E E E E E E G -
Steam 225°F U U E E E - - - U U U U G U U
Steam 300°F U U E E G - - - U U U U U U U
Stearic Acid 90% 200°F U G E G F E E E G G G E G G F
Steep Water - - - - - - - - - - G G - U -
Styrene (Fumes) - - E - - - - - U - - G U - -
Sulfamic Acid - - - - - E - E - - E - G - -
Sulphur (Molten) U F G U U E E - U F U G F U F
Sulphur Dioxide 60°F U G E E F E E E U G F E E G -
Sulphur Trioxide U G E - - E E - U U U E G G -
Sulfuric Acid 0-7% 70°F U F G F U E E E U G E E U U F
Sulfuric Acid 7-40% 70°F U U U U U G G E U U E E U U -
Sulfuric Acid 40-75% 70°F U U U U U G G E U U G G U U -
Sulfuric Acid 95-95% U U U U U U G E U U U G U U -
Sulfuric Acid 95-100% U U U U U U E E U U G G U U U
Sulfurous Acid 80% 100°F U U G F U E E G U U E E U - -
Tall Oil G G E G - E - E G G - E - E -
Tannic Acid 150°F U F E G G E E G E G G E E E F
Tar F E E E E E E - F F - E U U F
Tartaric Acid 150°F U G E G G E E G G G E E G E F
Toluol and Toluolene G E E - E E - G U U U E U U U
Toluene Sulfomic Acid - - U - - - - U - - - G - - -
Transformer Oil - - - - - - - - U - - E U - -
Tributyl Phosphate G F E - - E - E U U U U E G -
Trichloroacetic Acid U U U G G - - F G U U F G F -
Trichloroethylene F U E G G E - G U U U E U U U
Triethinolamine U U E G - - - G F E E U G G -
Trisodium Phosphate U U G G F - - E F F - - - - -
Tung Oil U U E F E E E - E G G E U U -
Turpentine U U E G G - - E G U U E U U F
Vinegar 70°F U - E E - E E G G G E E E G -
Water, Acid-Mine U - E U - E E G F F E E F F -
Water-Deionized - - E - - - - E E - E - E - -
Water-Demineralized U - E E E E - E E E E E E F -
Water-Fresh 180°F G E E E E E E E G G F U E U F
Water-Fresh 225°F G E E E E E E E U U U U E U -
Water-salt 180°F U U G E G E E E G G F U E U -
Water-Sewage 80°F U G E E E E E - E - - E E - -
Whiskey and Wine U U E E G E E E E E G E E - -
White Liquor U - E - - E E - G - G - - F -
Xylene, Xylol F E E - E E - E U U U E U U U
Zinc Chloride 5% 160° U U F G U G G E E E E E E E -
Zinc Phosphate - - G - - - - E E - - - E - -
Zinc Sulphate 25% 180°F U G E G G E E E E E E E E G -

34 ® CT-DEM-NE/NF/NEI
DEMCO 04/07 NP-3M
 DISTRIBUTED VALVES

TRADEMARK INFORMATION

DEMCO® is a registered trademark which is owned by Cameron.

This document contains references to registered trademarks or product designations,

which are not owned by Cameron.
Trademark Owner
CELCON Hoechst Celanese Corporation
DELRIN E.I. DuPont De Nemours & Company
FLUOREL Minnesota Mining and Manufacturing Company
HASTELLOY Haynes International, Inc.
HYCAR Hydrocarbon Chemical and Rubber Company
HYDRIN Zeon Chemicals USA, Inc.
HYPALON E.I. DuPont De Nemours & Company
INCONEL INCO Nickel Sales, Inc.
MONEL INCO Alloys International, Inc.
NORDEL E.I. DuPont De Nemours & Company
STELLITE Stoody Deloro Stellite, Inc.
TEFLON E.I. DuPont De Nemours & Company
VITON E.I. DuPont De Nemours & Company

DEMCO
® CT-DEM-NE/NF/NEI
04/07 NP-3M 35
 DISTRIBUTED VALVES

NOTES

® CT-DEM-NE/NF/NEI
DEMCO 04/07 NP-3M
DISTRIBUTED VALVES
 DISTRIBUTED VALVES

VALVES & MEASUREMENT

3250 Briarpark Drive, Suite 300
Houston, Texas 77042
USA Toll Free 800 323 9160

For the most current contact and location information go to: www.c-a-m.com

Printed in Canada 04/07-NP-3M CT-DEM-NE/NF/NEI