Scribd
Upload
58 views1 page

LMS Intervention Activity 1 (01 Activity 1)

The plastic bottle is gray, orange, or white in color and can be easily held in one hand. It measures 55cm by 18cm and can store liquids well while being resistant to oils and transmitting little oxygen. The plastic bottle is made of polymers like polyethylene and polystyrene that do not burn easily but can break down when heated above 120-130 degrees Celsius depending on the specific plastic used.

Uploaded by

Edrian Lait
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
58 views1 page

LMS Intervention Activity 1 (01 Activity 1)

The plastic bottle is gray, orange, or white in color and can be easily held in one hand. It measures 55cm by 18cm and can store liquids well while being resistant to oils and transmitting little oxygen. The plastic bottle is made of polymers like polyethylene and polystyrene that do not burn easily but can break down when heated above 120-130 degrees Celsius depending on the specific plastic used.

Uploaded by

Edrian Lait
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Physical Properties

1. The color of the plastic bottle is gray, orange, white and have more distinct colors to be able to
recognize easily.
2. The size of the plastic bottle can be held using one hand operation and its convenient and easy to use.

3. The dimension of the plastic bottle is 55cm to 18cm based on my calculations.


4. The shape of the remote is large and wide but can be held using only one hand.
5. Other properties of the plastic bottle are they can store most of liquid properties. It has high
resistance to oils and has transmits very little oxygen. It provides a strong barrier to most gases, and its
drop-impact resistance is also very good. This material is chemically resistant, but it is vulnerable to
some solvents.

Chemical Properties
1. The plastic bottle is made of polymers, which are chemically bonded to create materials such as
polyethylene and polystyrene. The different raw materials of plastic bottles include polyethylene
terephthalate and high-density polyethylene.
2. This plastic bottle It is not an easily combustible material and does not support combustion in the
atmosphere. Thermal conductivity is 0.14–0.20 W/(m K); the specific heat capacity is 1.1 J/(g K).
3. The boiling point of this plastic bottle is high-density and low-density polyethylenes -- HDPE and LDPE,
or recyclables 2 and 4 -- melt at 130 degrees Celsius (266 degrees Fahrenheit) and 120 degrees Celsius
(248 degrees Fahrenheit), respectively, according to Dynalab Corp.
4. The freezing point depends on the plastic and varies greatly. Some plastics do not melt because they
are formed by a chemical reaction and “set” when cured. This plastic when heated do not melt, they
break down into other solids.

You might also like