===================================================================================

==========================
____ ____ _____ ____ ____ ______
/ __ \ / __ \ / ___/ / __ \ / __ \ / ____/
/ /_/ / / / / / \__ \ / /_/ / / / / / / / __
/ ____/ / /_/ / ___/ / / _, _/ / /_/ / / /_/ /
/_/ \____/ /____/ /_/ |_| \____/ \____/
Project x86

===================================================================================
==========================

*** Remember here only includes 3 kernel variants which we have adjusted ***

===================================================================================
==========================

How to install POSROG V3U8 :

1. Install latest version of default Grub2Win POSROG and customize it with your
Bios UEFI or Legacy, once installed close it or don't open it because grub.cfg
configuration or grub code is already embedded in Grub2Win

2. Prepare a new partition with format ext4 using disk genius software or other
software (this is recommended for clean install mode)

3. Create a folder with name "posrog"

4. Create a folder with name "data" inside "posrog" folder (remember clean install
mode requires an empty data folder)

5. Extract or take posrog files from ISO using 7-zip or other software and Copy
file and move it to "posrog" folder:

- initrd.img
- kernel-satu <====> kernel 4.13
- kernel-dua <====> kernel 4.20
- kernel-tiga <====> kernel 5.0
- posrog
- ramdisk.img
- system.img

6. Restart and boot into grub2win (remember disable Secure Boot for UEFI), select
kernel for first boot (for AMD Ryzen with IGPU select kernel 5.8 or 5.10)

7. Wait for booting process to enter the setup wizard (not added for the SLE
version) select "Set as a new" then don't connect to wifi or network first then
select "do not use network for setup" and follow next steps, if you experience
crash in the setup wizard you can disable via terminal press ALT+F1 type pm disable
com.google.android.setupwizard

===================================================================================
==================

Cara Instal POSROG V3U8 :

1. Instal Grub2Win bawaan POSROG terbaru dan sesuaikan dengan Bios UEFI atau Legacy
Anda, setelah terinstal tutup atau jangan dibuka karena konfigurasi grub.cfg atau
kode grub sudah tertanam di Grub2Win
2. Siapkan partisi baru dengan format ext4 menggunakan software disk genius atau
software lainya (ini disarankan untuk mode clean install)

3. Buat folder dengan nama "posrog"

4. Buat folder lagi dengan nama "data" didalam folder "posrog" (ingat mode clean
install membutuhkan folder data kosong)

5. Ekstrak atau ambil file posrog dari ISO menggunakan 7-zip atau software lainnya
dan Salin file serta pindahkan kedalam folder "posrog" :

- initrd.img
- kernel-satu <====> kernel 4.13
- kernel-dua <====> kernel 4.20
- kernel-tiga <====> kernel 5.0
- posrog
- ramdisk.img
- system.img

6. Restart dan boot ke grub2win, pilih kernel untuk boot pertama (untuk AMD Ryzen
dengan IGPU pilih kernel 5.8 atau 5.10)

7. Tunggu proses booting sampai masuk setup wizard (tidak ditambahkan untuk versi
SLE) pilih "Set as a new" setelah itu jangan hubungkan wifi atau jaringan terlebih
dahulu kemudian pilih "do not use network for setup" dan ikuti langkah
selanjutnya , jika anda mengalami crash pada setup wizard anda bisa disable via
terminal tekan ALT+F1 ketik pm disable com.google.android.setupwizard

===================================================================================
==================

Note:

* To replace Mesa Driver you only need to replace system.img and latest default
Kernel and make sure you have logged in to your google account beforehand, you can
back up old system.img by renaming the system.img.old

* If you get stuck in detection of Android root@posrog it it often happens because

your device does not boot with kernel you choose or mesa driver you choose doesn't
support your device's igpu, you can reboot by typing "reboot" in the terminal or by
using combination special key CTRL+ALT+Delete

* If you are stuck on the logo it often happens because your EXT4 partition is
damaged or your device cannot boot with kernel you choose, to solve your damaged
ext4 problem you have to delete ext4 partition then reboot again and create a new
ext4 partition then install posrog starting from scratch

===================================================================================
==================

Catatan :

* Untuk mengganti Mesa Driver Anda hanya perlu mengganti system.img dan Kernel
bawaan terbaru dan pastikan anda sudah login akun google sebelumnya, Anda dapat
membuat cadangan system.img lama dengan mengganti nama system.img.old

* Jika Anda terjebak di detection Android root@posrog itu sering terjadi

dikarenakan perangkat anda tidak bisa boot dengan kernel yang anda pilih atau mesa
driver yang anda pilih tidak mendukung dengan igpu perangkat anda, anda bisa
alternatif reboot dengan mengetik "reboot" diterminal atau dengan kombinasi tombol
spesial CTRL+ALT+Delete

* Jika Anda Mengalami Stuck di logo itu sering terjadi dikarenakan partisi EXT4
anda rusak bermasalah untuk mengatasi masalah ext4 anda yang rusak anda harus hapus
partisi ext4 kemudian reboot ulang dan buat baru partisi ext4 lalu instal posrog
mulai dari awal

===================================================================================
==================

Website : posrog.my.id
Telegram EN : t.me/posrog
Telegram ID : t.me/posrog_id