Tools History Card

Created date: 05-06-2018 Ref.Doc.No:PRD/R/08

Revision.no/date: 00/- Issu.no/Date:05-06-2018

Previous Sheet
Cummulative Qty -
Tool Name / Number M/C Number - Validation Qty - 300000 ± 20000
Previous Sheet
Validation Qty -
Tools code

SL
Processing Data Tools Production and replacement details
.No
Date OE / OET Produced Qty Qty produced after Validation Cummulative QTY Date of change/Validation Engineer sign

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

Note:
1)Fill out the quality abnormality report and report it to your superior, except for periodic replacements 3) Mark with RED color paint for the non-usable tools
2)Every abnormal consumption will be noted in abnormal cunsumption report-Supervisor 4)Note the consumption details at the time of consumption
5) At the time of abnormality follow abnormality handling procedure
 Created date: 05-06-2018 Revision.no/date: 00/- Ref.Doc.No:PRD/R/08 Issu.no/Date:05-06-2018

Sigma Forging & Forming Pvt Ltd.,

Tools History Sheet
Tool Name / Number - Validation Qty - 3,00,000 ± 25,000 M/C Number -

Tools code - Previous Sheet Validation Qty - Previous Sheet Cumulative Qty -
Tools Production and replacement details
SL
.No Date OE / OET Produced Qty Qty produced after Validation Cumulative QTY Date of change/Validation Shift Incharge sign

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

Note:
1- If any abnormality inform to shift incharge immediately. 4- Update the Tool History Sheet at the End of the shift.
2- Tool Failure analysis to be done for every abnormal consuption by respective operator. 5- Note the consumption details in the Tool Change Record at the time of consumption.
3- Mark with RED colour paint for the non-usable tools 6- At the time of abnormality follow abnormality handling procedure.
Dept Head Sign
 Created date: 05-06-2018 Revision.no/date: 00/- Ref.Doc.No:PRD/R/08 Issu.no/Date:05-06-2018

SIGMA FORGING & FORMING PRIVATE LTD

BURNISHING TOOL HISTORY SHEET
Tool Serial
TOOL CODE - MAX - 1,50,0000 M/C NO -
Number -

Previous Sheet Closing Previous Sheet Closing Die Side - 1 or 2

Validation Qty - Cummulative Qty -

Shift Incharge
DATE EMP.NO PART NUMBER OUTPUT Shot blasted ON VALIDATION QTY CUMMULATIVE QTY
Sign

Note;
1- Start with Previous sheet Validation & Cummulative Qty, 5- Die life is completed inform to your superior for further action,
2- Mark with Round which side of the die is running. 6- Use new sheet for New tool.
3- Update the Tool History Sheet at the End of the shift. 7- Tool Failure analysis to be done for every abnormal consuption by
4- Mark with RED colour paint for the non-usable tools respective operator.
Dept Head Sign
 SIGMA FORGING & FORMING PRIVATE LTD
ON / OFF Work Instruction Flow Diagram

RUN SEQUENCE STOP SEQUENCE

SOURCE ON STOP & RESET

BUTTON

AIR PRESSURE SHORT FEED OFF

LAMP LIGHTS

MAIN MOTOR ON COOLING OFF

LUB PUMP ON LUB PUMP OFF

COOLING ON MAIN MOTOR OFF

COUNTER ON
SOURCE OFF

SHORT FEED ON

OFF

Prepared By Verifyed By Approved By