Scribd
Upload
35 views

Chlorine and PH Correction Diagram

1. The document describes a system for monitoring and controlling free chlorine and pH levels in an industrial water storage tank. 2. The system uses sensors to measure free chlorine, pH, and flow rates from three boreholes feeding into the tank. 3. It uses the sensor readings as inputs to control four dosing pumps that dose sodium hypochlorite, sodium hydroxide, and alarms to monitor levels.

Uploaded by

Gerardo Rubira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views

Chlorine and PH Correction Diagram

1. The document describes a system for monitoring and controlling free chlorine and pH levels in an industrial water storage tank. 2. The system uses sensors to measure free chlorine, pH, and flow rates from three boreholes feeding into the tank. 3. It uses the sensor readings as inputs to control four dosing pumps that dose sodium hypochlorite, sodium hydroxide, and alarms to monitor levels.

Uploaded by

Gerardo Rubira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Free Chlorine and pH

1 x Flow Transmitter: 4-20 mA or PNP/PNP 2 x Analog for 2 dosing pumps (channel flow rate)
Transmitter, with flow
4 x Low Level Switch 1 1 x Analog for 1 dosing pump (channel Free Chlorine)
sensor
1 x Free Chlorine Sensor Inputs Outputs 1 x Analog for 1 dosing pump (channel pH)
1 x pH Sensor 6 x Alarm signal for 3 Channels (low and high)
GSM Alarm
1 x Omnicom Flow sensor 4 x Alarm signal for 4 level switch
Data Logger
1 x Alarm signal for Omnicom Flow sensor
Communication
for remote access

Free Chlorine
Dosing pump Sensor (0-5 ppm)
NaClO
NaClO pH Sensor
Low Level (1-14)
Switch

Dosing pump
NaOH Dosing pump
NaOH NaClO
Low Level NaClO
Low Level
Switch
Switch

Flow Transmitter Industrial Water


with totalizer Storage Tank Dosing pump
NaOH
240 m3 NaOH
Outputs: 4-20 mA Low Level
or PNP/PNP Switch

Circulation
Pump
5 m3/h

Borehole Borehole Borehole


Nº 1 Nº 2 Nº 3
Flow rate Flow rate Flow rate
60 m3/h 40 m3/h 20 m3/h

You might also like