0% found this document useful (0 votes)
144 views

BM Error

Uploaded by

Silas Junior
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
144 views

BM Error

Uploaded by

Silas Junior
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

[ErrorDescription]

130=[DL1130]Invalid command
131=[DL1131]Unknown command
132=[UB1132]Operation failed
133=[DL1133]Not support this baudrate
134=[DL1134]Download not started
135=[DL1135]Download multi-started
136=[DL1136]Download early end
137=[DL1137]Download destination error
138=[DL1138]Image size is over its partition
139=[DL1139]Verify error
140=[UB1140]Not verify
141=[UB1141]Not enough memory
142=[UB1142]Wait input time out
145=[UB1145]Repeat continue
146=[UB1146]Repeat break
150=[DL1150]Incompatible partition
151=[UB1151]Unknow device
152=[UB1152]Invalid device size
153=[UB1153]Illegal SDRAM
160=[SW1160]Fixed NV checksum error,cannot be equal with zero
161=[UB1161]Flash checksum failed
162=[UB1162]Write flash failed
163=[UB1163]Chip ID not match
164=[UB1164]Flash configure error
165=[UB1165]STL size error
166=[UB1166]Security verification fail
167=[UB1167]Phone has been rooted
168=[UB1168]Don't support to lock sim
169=[UB1169]Don't support to unlock sim
170=[UB1170]Security data verify error
172=[UB1172]Not enabled write flash
173=[UB1173]Failure to enable secure boot
179=[UB1179]Flash written protection
180=[UB1180]Flash initializing failed
182=[UB1182]DDR check failed
183=[UB1183]Self refresh failed
185=[DL1185]Download Failed
254=[UB1254]Software has not supported this feature
257=[PS2257]Uart send error
258=[UB2258]Decode or verify received buffer error
259=[UB2259]Received buffer is not in the format we want
260=[UB2260]Read error
261=[PS2261]Too much data
262=[PS2262]User cancel
263=[PS2263]Startdata size is zero
264=[PS2264]Open port fail
265=Second Hand Memory : [SW2265]Register modified. Please stop using this memory!
266=Second Hand Memory : [SW2266]EMMC Partition done. Please stop using this
memory!
267=Second Hand Memory : [SW2267]RPMB written. Please stop using this memory!
268=Second Hand Memory : [SW2268]Register modified & EMMC Partition done. Please
stop using this memory!
269=Second Hand Memory : [SW2269]Register modified & RPMB written. Please stop
using this memory!
270=Second Hand Memory : [SW2270]EMMC Partition done & RPMB written. Please stop
using this memory!
271=Second Hand Memory : [SW2271]Register modified & EMMC Partition done & RPMB
written. Please stop using this memory!
272=Second Hand Memory : [SW2272]Software has not supported this feature
273=[SW2273]CRC Check Error
274=[SW2274]Create readback file failed
275=[SW2275]The data packet with type(0x96) returned was misformatted
276=[SW2276]Check baud time out
277=[SW2277]Compare Software: The amount to be compared from DUT more than Pac
278=[SW2278]Compare Software: CompareID in Pac not equal to that from DUT
279=[SW2279]Compare Software: Pac has no CompareID from DUT

You might also like