SCHOOLS DIVISION OF CAMARINES SUR

LEARNING ACTIVITY SHEET IN COMPUTER SYSTEM SERVICING GRADE 9

Quarter 3 Week 5 Worksheet no. 5
Burn-in or Testing Installed Computer Equipment / Devices

Name of Student:
Learning Area-Grade Level: TLE-CSS – Grade 9__
Date:

A test procedure is a set of steps to guide you through what needs to be done
to thoroughly test an installation. It is designed to help you work more effectively and
to make sure you test everything that needs testing. In this Learning Activity Sheet,
you will be introduced to the step-by-step procedures of testing an installed device
and conducting external and internal inspection. See attached Learner’s Reference.

Lesson 8: Install and Configure Computer System

LO 5.1: Test devices/systems and/or installation to determine whether it

conforms to requirements
Specific Objectives:
a. Recognize the procedures for burn-in and testing installed computer
equipment/devices.

b. Share the realization on the activities and importance of following

procedures correctly.

c. Rearrange the step-by-step procedures for internal and external

inspection csorrectly.

Address: Freedom Sports Complex, San Jose, Pili, Camarines Sur

Email: [email protected]
Website: www.depedcamsur.com
Telephone No: (telefax) 8713340
 Activity I
Match the words in Column A to its correct description in Column B. Select the
correct letter and write your answer on the space provided before the numbers.
COLUMN A COLUMN B
Validating the A) This step is important because you need to be able to
Test recognize when a test shows a problem or is
____1. Information successful. For example, if ping is used to test a
network connection, then ‘Request timed out’ shows if
the test was not successful.
Gathering Test B) The final step is an important end to testing. You need
Information to check the specification for the installation to make
____2. sure that it has been met. For example, if a user
requested an upgrade to make their display run at
1920 x 1200, then the ICT professional should check
that the graphics card and screen can do this.
Responding to C) This step is to run the tests required by the procedure
Test and find out what happens. You should record all the
____3. results of your tests in a log so that you know which
Information
one passed and which one failed, thereby requiring
further action.
____4. Checking D) This step is to check the data you gathered from the
Specification tests to make sure it is correct. This is usually done by
running the tests again.
____5. Test E) This is a set of steps to guide you through what needs
Procedure to be done to thoroughly test an installation.

Activity 2

Below are the steps in perorming an internal inspection. Select the correct word/s in
the word bank to complete each step.

side expansion jumper power

seated peripherals cable
cover cards s sources

1. Turn off the system, including any attached ______________, and disconnect
all the AC power cables from electrical outlets.
2. Remove the computer ’s right_________________.
3. Verify that the chips, ________________, and SEC cartridge and heat sink
assembly or assemblies are fully seated in their sockets or connectors.
4. To ensure that the chips are fully ___________in their sockets, press firmly
on the top of each chip.
5. Verify that all ________________ are set correctly.
Activity 3
Below are the procedures in an performing external inspection. Arrange these steps by
numbering them in order. Write your answers on the space provided.

Address: Freedom Sports Complex, San Jose, Pili, Camarines Sur

Email: [email protected]
Website: www.depedcamsur.com
Telephone No: (telefax) 8713340
 _____1. Inspect the exterior of the computer, including all controls and indicators, and
all user-accessible data storage devices for any signs of physical damage.
_____2. Verify that all power cables are properly connected to the computer, the
monitor and peripherals, and their power sources.
_____3. Inspect all external monitor controls for any obvious damage or improper
settings.
_____4. Turn off the computer, the monitor, and all peripherals.
_____5. Verify that the keyboard and mouse interface cables are firmly attached to the
proper connectors on the back of the computer.
_____6. Verify that the video interface cable is firmly attached to the video connector
on the back panel or to a video expansion card, and to the connector on the
back of the monitor.
_____7. Inspect the keyboard to ensure that no keys are sticking. If one or more keys
are sticking, it may be necessary to replace the keyboard.

Activity 4
Reflect in your learning experiences on burn-in or testing devices. Share your
insights by completing the sentences below.

The activities in this LAS help me appreciate

___________________________________________________________________
___________________________________________________________________
Following steps or procedures correctly is necessary because
___________________________________________________________________
___________________________________________________________________

Rubrics for Activity 4

Scoring Rubrics
5 4 3 2 Score
The content 80% of the 40% of the The content is
Content

reflects the content reflects content reflects unrelated and

learner’s the learner’s the learner’s irrelevant to the
understanding of understanding of understanding lesson.
the lesson. the lesson. of the lesson.
There are no There are 1-2 There are 3-4 Too many
Mechanics

errors in spelling, errors in spelling, errors in punctuation and

punctuation, or punctuation, and spelling, grammatical
grammar usage. grammar usage. punctuation, errors that
and grammar interfere with the
usage. meaning.
The essay is well- The essay shows The essay The essay is not
Organization

organized and some organization shows poor organized and is

flows logically. It and flows logically organization written illogically.
shows a mature to be easily and weak
understanding of understood. logical flow.
transitioning.
TOTAL

Address: Freedom Sports Complex, San Jose, Pili, Camarines Sur

Email: [email protected]
Website: www.depedcamsur.com
Telephone No: (telefax) 8713340
DepEd CG . 2016. "Curriculum Guide." K to 12 - Computer Systems Servicing NC II
Curriculum Guide. DepEd, May.
Slideshare. 2016. slideshare. January 20. Accessed March 18, 2021.
https://www.slideshare.net/ynlcadapan/ict-9-module-3-lesson-3-conducting-teston-
the-installed-computer-system.

Prepared by:
MICHAEL C. DELFINO, T I, Sagrada National High School, Tinambac North, Camarines Sur

Quality Assured by:

MARJORIE IRENE B. DELA ROSA, TI, Juan F. Triviño MHS, Pasacao District, SDO
Camarines Sur
EDMARK M. PADO, TI, Maydaso ES, Milaor District, SDO Camarines Sur

Validated by:
IAN JOSEPH C. VELASCO, TI, Bagacay NHS, Tinambac District, SDO Cam. Sur
ALICIA B. CHAVEZ, TII, La Salvacion NHS, Tigaon District, SDO Camarines Sur

Reviewed by: SALVADOR T. PELINGON, EPS-ICT, SDO Camarines Sur

Layout Artist:
JOHN PAULO C. CHAVEZ, TI, Tapayas NHS, Balatan District, SDO Camarines Sur

Answer Key
Activity 1: Multiple Choice Activity 3
1. D 1. 7
2. C 2. 2
3. A 3. 5
4. B 4. 1
5. E 5. 3
6. 4
Activity 2: Fill in the blank 7. 6
1. peripherals
2. side cover
3. expansion cards Activity 4 Answers may vary
4. seated
5. jumpers

Address: Freedom Sports Complex, San Jose, Pili, Camarines Sur

Email: [email protected]
Website: www.depedcamsur.com
Telephone No: (telefax) 8713340
 SCHOOLS DIVISION OF CAMARINES SUR

LEARNERS REFERENCE IN COMPUTER SYSTEMS SERVICING NC II

Quarter 3 Week 5 Worksheet no. 5
Burn-in or Testing Installed Computer Equipment / Devices

Procedures for Burn-in or Testing Installed Computer Equipment / Devices

The first step is to run the tests required by the

procedure and find out what happens. You should record
1. Gathering test
all the results of your tests in a log so that you know
information.
which pass and which fail, thereby requiring further
action.
The next step is to check the data you gathered from the
2. Validating the
tests to make sure it is correct. This is usually done by
test information.
running the tests again.
This step is important because you need to be able to
recognize when a test shows problem or is successful.
3. Responding to
For example, if ping is used to test a network connection
test information
then ‘Request timed out’ shows if the test was not
successful.
The final step is an important end to testing. You need to
check the specification for the installation to make sure
4. Checking that it has been met. For example, if a user requested an
specification. upgrade to make their display run at 1920 x 1200, then
the ICT professional should check that the graphics card
and screen can do this.

External Visual Inspection

The external visual inspection consists of a quick inspection of the exterior

of the computer, the monitor, the keyboard, any peripherals, and cables. While
performing the visual inspection, make any necessary corrections.

To perform the external visual inspection, perform the following steps:

1. Turn off the computer, the monitor, and all peripherals.
2. Verify that all power cables are properly connected to the computer, the
monitor and peripherals, and their power sources.
3. Verify that the keyboard and mouse interface cables are firmly attached
to the proper connectors on the back of the computer.
 For a PS/2-compatible mouse, the keyboard and mouse interface
cable connectors are identical except for their labels.
 For a Universal Serial Bus (USB) mouse, the mouse interface
cable must be firmly attached to one of the USB port connectors,
and its captive the device. The captive screws that secure these
connectors at each end of the interface cable must be secure
enough to ensure a firm connection.

Address: Freedom Sports Complex, San Jose, Pili, Camarines Sur

Email: [email protected]
Website: www.depedcamsur.com
Telephone No: (telefax) 8713340
 4. Verify that the video interface cable is firmly attached to the video
connector on the back panel or to a video expansion card, and to the
connector on the back of the monitor.
5. Inspect all external monitor controls for any obvious damage or improper
settings.
6. Inspect the keyboard to ensure that no keys are sticking. If one or more
keys are sticking, it may be necessary to replace the keyboard.
7. Inspect the exterior of the computer, including all controls and indicators,
and all user-accessible data storage devices for any signs of physical
damage.

Observing the Boot Routine

To observe problem indications during the boot routine, perform the following steps:

1. If the system is off, turn on all peripherals and the computer.

2. Check the power supply fan. Does the fan run normally?
 If Yes. Proceed to step 3.
 If No. Troubleshoot the system power supply.
3. Watch the <Num Lock>, <Caps Lock>, and <Scroll Lock> indicators on the
upper right corner of the keyboard.
After all three indicators flash momentarily, and following a long pause
(approximately 30 seconds), the Num Lock indicator should light up and
remain on (unless the Num Lock option is set to Off in the System Setup
program).
Do these indicators flash on and off within approximately 10 seconds after the
boot routine starts?
 If Yes. Proceed to step 4
 If No. Troubleshoot the system power supply. If the troubleshooting
procedure indicates that the system power supply is operational,
troubleshoot the memory
4. During the boot routine, observe the system for any of the following
indications:
 Beep codes – A beep code is a series of beeps that indicates an error
condition.
 System error messages - these messages can indicate problems or
provide status information.
 Diskette - drive and hard-disk drive access indicators — These
indicators light up in response to data being transferred to or from the
drives.
5. Observe the monitor screen for the Diagnostics menu.

NOTICE: Before you proceed with the internal visual inspection described in this
section, ensure that the user has saved all open files and exited all open application
programs if possible.

Address: Freedom Sports Complex, San Jose, Pili, Camarines Sur

Email: [email protected]
Website: www.depedcamsur.com
Telephone No: (telefax) 8713340
 Internal Visual Inspection

A simple visual inspection of a computer ’s interior hardware can often lead to

the source of a problem, such as a loose expansion card, cable connector, or
mounting screw.

To perform the internal visual inspection, perform the following steps:

1. Turn off the system, including any attached peripherals, and disconnect
all the AC power cables from electrical outlets.
CAUTION: Before beginning to work inside the computer, disconnect
the power supply from the power source and the power
supply cables from the power supply.
2. Remove the computer ’s right side cover.
CAUTION: The heat sink assembly can get extremely hot during
system operations. Be sure that it has had sufficient time
to cool before touching it.
CAUTION: When handling the heat sink assembly, take care to
avoid sharp edges on the heat sink.
3. Verify that the chips, expansion cards, and SEC cartridge and heat sink
assembly or assemblies are fully seated in their sockets or connectors.
4. To ensure that the chips are fully seated in their sockets, press firmly on
the top of each chip.
5. Verify that all jumpers are set correctly.
6. Check all cable connectors inside the computer to verify that they are
firmly attached to their appropriate connectors.
7. Reinstall the computer cover.
8. Reconnect the computer and any attached peripherals to their power
sources and turn them on.

Third-Party Programs

There are several third-party programs that enable users to display their
system specifications and, in some cases, also benchmark their computer.
Below is a short listing of some of these programs.

 Win Audit http://www.parmavex.co.uk/winaudit.html

 Fresh Diagnose http://www.freshdevices.com/
 Lavalys’ EVEREST http://www.lavalys.com/
 Software SANDRA http://www.sisoftware.co.uk/

References:
DepEd CG . 2016. "Curriculum Guide." K to 12 - Computer Systems Servicing NC II
Curriculum Guide. DepEd, May.
Slideshare. 2016. slideshare. January 20. Accessed March 18, 2021.
https://www.slideshare.net/ynlcadapan/ict-9-module-3-lesson-3-conducting-teston-
the-installed-computer-system.

Address: Freedom Sports Complex, San Jose, Pili, Camarines Sur

Email: [email protected]
Website: www.depedcamsur.com
Telephone No: (telefax) 8713340