Scribd
Upload
112 views

Doka Circular Formwork en

The document describes the Circular formwork H20 system for constructing curved concrete walls. It allows for smoothly curved walls with radii from 3.5 meters upwards that can be adjusted continuously by turning spindles. The system is highly efficient and cost-effective due to its small number of form ties, pre-assembled elements, and flexibility. Radii can be easily set and checked using flexible templates.

Uploaded by

ezzularab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views

Doka Circular Formwork en

The document describes the Circular formwork H20 system for constructing curved concrete walls. It allows for smoothly curved walls with radii from 3.5 meters upwards that can be adjusted continuously by turning spindles. The system is highly efficient and cost-effective due to its small number of form ties, pre-assembled elements, and flexibility. Radii can be easily set and checked using flexible templates.

Uploaded by

ezzularab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

The Formwork Experts.

Circular formwork H20


The practical circular formwork for exact curves www.doka.com
The practical circular formwork for exact curves

Circular formwork H20 is a practical circular formwork system that delivers smooth, curved walls from radii of
3.50 m upward – steplessly.

Highly cost-efficient Rapid working


right from the very first time of use and ease of handling

The system reduces the rental and wage costs at your Efficient construction workflow, as
site because  there is only one connecting device
 it only needs a small number of form-ties – just one (Adjustable clamp 10cm)
form-tie per 1.50 m²  it can easily be combined with Framax Xlife,
 only small commissioning quantities are needed, as it Alu-Framax Xlife and Column formwork RS
adapts effortlessly to any layout  setting the radii is easy – simply by turning spindles
 the system elements are pre-assembled and are readied  radii are easy to check, using flexible templates
for use simply by setting the desired radius with the
adjusting spindles

Radii can be continuously adjusted


simply by turning spindles

Circular formwork H20 stands out for great flexibility,


thanks to its
 practical height grid
 exact curves from a radius of 3.50 m upward
 flexible, heavy-duty Dokaplex 21 mm form-ply

The practical height grid and the systematic spacing of the form-ties
make it possible to form widely diff ering height-combinations quickly
and easily.
360

300

240

120

70

240 240 240 240 240

Optimum element size-grid with only two diff erent widths of element (inside element 2.40 m, outside element 2.50 m)
Art. no. 931412502 // 03/2013 en-GB

Doka GmbH | Josef Umdasch Platz 1 | 3300 Amstetten | Austria | T +43 7472 605-0 | F +43 7472 64430 | [email protected] | www.doka.com

You might also like