Scribd
Upload
68 views

AMPHOSOL1C

Uploaded by

José Manuel Martínez cedillo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
68 views

AMPHOSOL1C

Uploaded by

José Manuel Martínez cedillo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

St epan ®

Product Bulletin

Product AMPHOSOL® 1C
Name
Chemical O CH2CH2OH
Structure || |
R C – NH – CH2CH2 –N – CH2 COONa

R = coco
Chemical Sodium cocoamphoacetate is a mild amphoteric surfactant.
Description
CAS 68608-65-1
Registry No.
INCI Name Sodium Cocoamphoacetate
Applications Functional Properties
• Secondary surfactant
• Foam booster
• Viscosity builder
• Compatible with anionics, nonionics and cationics
End Product Uses
• Bubble Baths • Hand Soaps
• Body Washes • Facial Washes
• Shampoos • Shower Gels
• Baby Products • Ethnic Products
• Pet Shampoos

Typical Appearance at 25°C ......................... Clear to hazy liquid Actives, %........................................................ 36.5
Properties Solids, % .................................................................... 44 Sodium Chloride, % ........................................... 6.5
pH, 10% aqueous ........................................................ 9 Color, Gardner ............................................. 3 max.
Freeze Point, °C (°F) ........................................... -15 (5) Density, g/ml (lbs/U.S. gal) ....................... 1.02 (8.5)
RVOC, U.S. EPA, % ...................................................... 0 Preservative ................................ DMDM Hydantoin
Biodegradability Product is biodegradable. Additional information is available upon request.

Toxicity AMPHOSOL 1C is practically non-toxic orally (LD50 ranging from 15.9-28 ml/kg) and causes minimal eye irritation at
16% active. Non-irritating and non-sensitizing at a concentration of 10% active in a repeated insult patch test on 141
subjects.

Storage & Normal safety precautions (e.g., gloves and safety goggles) should be employed when handling AMPHOSOL 1C
Handling in its concentrated form. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly
after handling AMPHOSOL 1C. See SDS for more information.

Standard Packaging: AMPHOSOL 1C is available in bulk and drums.

It is recommended that AMPHOSOL 1C be stored in sealed containers and kept at temperatures between 50°F (10°C)
and 120 °F (49°C). Avoid overheating or freezing. If material is frozen, mild heat and agitation are recommended to
ensure the material is homogeneous before use.

Workplace Exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal
Exposure protective equipment, and other workplace safety practices should be used to control these exposures. See SDS for
more information.

January 2022
Supersedes:
July 2017
Page 1 of 2
AMPHOSOL® is a registered trademark of Stepan Company.
Clearances The international inventories (country clearances) of AMPHOSOL 1C can be found in Section 15 of the Safety Data
Sheet (SDS). It is the responsibility of the formulator to review the chemical control regulations for each country where
the end product is intended to be sold or used. If you have any further questions regarding inventories, please contact
North America Technical Service at [email protected].

Product This product bulletin has been written in accordance with ACC’s Product Stewardship guidelines.
Stewardship

Additional A Safety Data Sheet (SDS) is available upon request.


Safety
Information
The information contained herein is based on the manufacturer’s own study and the works of others and is subject to change
without prior notice. The information is not intended to be all-inclusive, including as to the manner and conditions of use, handling,
storage or disposal or other factors that may involve additional legal, environmental, safety or performance considerations. Nothing
contained herein grants or extends a license, express or implied, in connection with any patents issued or pending of the
manufacturer or others, or shall be construed as a recommendation to infringe any patents or to violate any applicable laws.
STEPAN COMPANY MAKES NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR USE, EXPRESS
OR IMPLIED, AND NO OTHER WARRANTY OR GUARANTY, EXPRESS OR IMPLIED, IS MADE, INCLUDING AS TO
INFORMATION REGARDING PERFORMANCE, SAFETY, SUITABILITY, STABILITY, ACCURACY, COMPLETENESS OR
ADEQUACY. Stepan Company (and its employees, subsidiaries and affiliates) shall not be liable (regardless of fault) to the vendee,
its employees, or any other party for any direct, indirect, special or consequential damages arising out of or in connection with the
information provided herein, including in respect of its accuracy, completeness, adequacy, furnishing, or use, or reliance upon such
information. The vendee assumes and releases Stepan Company (and its employees, subsidiaries and affiliates) from all liability,
whether in tort, contract or otherwise to the fullest extent possible under the relevant law.

For Technical Service Call: For Customer Service Call:


Stepan North America +1-800-745-7837 Stepan North America +1-800-457-7673
Corporate Headquarters Stepan Mexico +55-11-5089-2208 Stepan Mexico +52-555-533-1967
Stepan Quimica +55-11-5089-2200 Stepan Quimica +55-11-5089-2200
Northbrook, Illinois 60062, U.S.A. Stepan Colombia +571-636-2808 Stepan Colombia +57-6-8993125
January 2022
Supersedes: Phone: 847-446-7500 Stepan Europe +33-476-505-160 Stepan UK +44-161-338-5511
July 2017 Fax: 874-501-2100 Stepan Asia +656-879-9855 Stepan France +33-476-50-51-00
Page 2 of 2 Website: www.stepan.com Stepan Philippines +656-879-9855 Stepan Philippines +63-2-842-7951

© 2022, Stepan Company. All rights reserved.

You might also like