Intergraph Smart® 3D

Electrical User's Guide

Version 2018 (12.0)
June 2018
Copyright
Copyright © 2004-2018 Hexagon AB and/or its subsidiaries and affiliates. All rights reserved.
This computer program, including software, icons, graphic symbols, documentation, file formats, and audio-visual displays; may be
used only as pursuant to applicable software license agreement; contains confidential and proprietary information of Hexagon AB
and/or third parties which is protected by patent, trademark, copyright law, trade secret law, and international treaty, and may not be
provided or otherwise made available without proper authorization from Hexagon AB and/or its subsidiaries and affiliates.
Portions of this software are owned by Spatial Corp. © 1986-2018. All Rights Reserved.
Portions of the user interface are copyright © 2012-2018 Telerik AD.

U.S. Government Restricted Rights Legend

Use, duplication, or disclosure by the government is subject to restrictions as set forth below. For civilian agencies: This was
developed at private expense and is "restricted computer software" submitted with restricted rights in accordance with
subparagraphs (a) through (d) of the Commercial Computer Software - Restricted Rights clause at 52.227-19 of the Federal
Acquisition Regulations ("FAR") and its successors, and is unpublished and all rights are reserved under the copyright laws of the
United States. For units of the Department of Defense ("DoD"): This is "commercial computer software" as defined at DFARS
252.227-7014 and the rights of the Government are as specified at DFARS 227.7202-3.
Unpublished - rights reserved under the copyright laws of the United States.
Hexagon PPM
305 Intergraph Way
Madison, AL 35758

Documentation
Documentation shall mean, whether in electronic or printed form, User's Guides, Installation Guides, Reference Guides,
Administrator's Guides, Customization Guides, Programmer's Guides, Configuration Guides and Help Guides delivered with a
particular software product.

Other Documentation
Other Documentation shall mean, whether in electronic or printed form and delivered with software or on Intergraph Smart Support,
SharePoint, or box.net, any documentation related to work processes, workflows, and best practices that is provided by Intergraph
as guidance for using a software product.

Terms of Use
a. Use of a software product and Documentation is subject to the Software License Agreement ("SLA") delivered with the software
product unless the Licensee has a valid signed license for this software product with Intergraph Corporation. If the Licensee has
a valid signed license for this software product with Intergraph Corporation, the valid signed license shall take precedence and
govern the use of this software product and Documentation. Subject to the terms contained within the applicable license
agreement, Intergraph Corporation gives Licensee permission to print a reasonable number of copies of the Documentation as
defined in the applicable license agreement and delivered with the software product for Licensee's internal, non-commercial
use. The Documentation may not be printed for resale or redistribution.
b. For use of Documentation or Other Documentation where end user does not receive a SLA or does not have a valid license
agreement with Intergraph, Intergraph grants the Licensee a non-exclusive license to use the Documentation or Other
Documentation for Licensee’s internal non-commercial use. Intergraph Corporation gives Licensee permission to print a
reasonable number of copies of Other Documentation for Licensee’s internal, non-commercial use. The Other Documentation
may not be printed for resale or redistribution. This license contained in this subsection b) may be terminated at any time and
for any reason by Intergraph Corporation by giving written notice to Licensee.

Disclaimer of Warranties
Except for any express warranties as may be stated in the SLA or separate license or separate terms and conditions, Intergraph
Corporation disclaims any and all express or implied warranties including, but not limited to the implied warranties of merchantability
and fitness for a particular purpose and nothing stated in, or implied by, this document or its contents shall be considered or deemed
a modification or amendment of such disclaimer. Intergraph believes the information in this publication is accurate as of its
publication date.
The information and the software discussed in this document are subject to change without notice and are subject to applicable
technical product descriptions. Intergraph Corporation is not responsible for any error that may appear in this document.

Intergraph Smart® 3D Electrical User's Guide 2

The software, Documentation and Other Documentation discussed in this document are furnished under a license and may be used
or copied only in accordance with the terms of this license. THE USER OF THE SOFTWARE IS EXPECTED TO MAKE THE FINAL
EVALUATION AS TO THE USEFULNESS OF THE SOFTWARE IN HIS OWN ENVIRONMENT.
Intergraph is not responsible for the accuracy of delivered data including, but not limited to, catalog, reference and symbol data.
Users should verify for themselves that the data is accurate and suitable for their project work.

Limitation of Damages
IN NO EVENT WILL INTERGRAPH CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL INCIDENTAL,
SPECIAL, OR PUNITIVE DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF USE OR PRODUCTION, LOSS OF
REVENUE OR PROFIT, LOSS OF DATA, OR CLAIMS OF THIRD PARTIES, EVEN IF INTERGRAPH CORPORATION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
UNDER NO CIRCUMSTANCES SHALL INTERGRAPH CORPORATION’S LIABILITY EXCEED THE AMOUNT THAT
INTERGRAPH CORPORATION HAS BEEN PAID BY LICENSEE UNDER THIS AGREEMENT AT THE TIME THE CLAIM IS
MADE. EXCEPT WHERE PROHIBITED BY APPLICABLE LAW, NO CLAIM, REGARDLESS OF FORM, ARISING OUT OF OR IN
CONNECTION WITH THE SUBJECT MATTER OF THIS DOCUMENT MAY BE BROUGHT BY LICENSEE MORE THAN TWO (2)
YEARS AFTER THE EVENT GIVING RISE TO THE CAUSE OF ACTION HAS OCCURRED.
IF UNDER THE LAW RULED APPLICABLE ANY PART OF THIS SECTION IS INVALID, THEN INTERGRAPH LIMITS ITS
LIABILITY TO THE MAXIMUM EXTENT ALLOWED BY SAID LAW.

Export Controls
Intergraph Corporation’s commercial-off-the-shelf software products, customized software and/or third-party software, including any
technical data related thereto (“Technical Data”), obtained from Intergraph Corporation, its subsidiaries or distributors, is subject to
the export control laws and regulations of the United States of America. Diversion contrary to U.S. law is prohibited. To the extent
prohibited by United States or other applicable laws, Intergraph Corporation software products, customized software, Technical Data,
and/or third-party software, or any derivatives thereof, obtained from Intergraph Corporation, its subsidiaries or distributors must not
be exported or re-exported, directly or indirectly (including via remote access) under the following circumstances:
a. To Cuba, Iran, North Korea, the Crimean region of Ukraine, or Syria, or any national of these countries or territories.
b. To any person or entity listed on any United States government denial list, including, but not limited to, the United States
Department of Commerce Denied Persons, Entities, and Unverified Lists, the United States Department of Treasury Specially
Designated Nationals List, and the United States Department of State Debarred List
(https://build.export.gov/main/ecr/eg_main_023148).
c. To any entity when Customer knows, or has reason to know, the end use of the software product, customized software,
Technical Data and/or third-party software obtained from Intergraph Corporation, its subsidiaries or distributors is related to the
design, development, production, or use of missiles, chemical, biological, or nuclear weapons, or other un-safeguarded or
sensitive nuclear uses.
d. To any entity when Customer knows, or has reason to know, that an illegal reshipment will take place.
Any questions regarding export/re-export of relevant Intergraph Corporation software product, customized software, Technical Data
and/or third-party software obtained from Intergraph Corporation, its subsidiaries or distributors, should be addressed to PPM’s
Export Compliance Department, 305 Intergraph Way, Madison, Alabama 35758 USA or at [email protected].
Customer shall hold harmless and indemnify PPM and Hexagon Group Company for any causes of action, claims, costs, expenses
and/or damages resulting to PPM or Hexagon Group Company from a breach by Customer.

Trademarks
Intergraph®, the Intergraph logo®, Intergraph Smart®, SmartPlant®, SmartMarine®, SmartSketch®, SmartPlant Cloud®, PDS®,
FrameWorks®, I-Route, I-Export, Isogen®, SPOOLGEN, SupportManager®, SupportModeler®, SAPPHIRE®, TANK, PV Elite®,
CADWorx®, CADWorx DraftPro®, GTSTRUDL®, and CAESAR II® are trademarks or registered trademarks of Intergraph Corporation
or its affiliates, parents, subsidiaries. Hexagon and the Hexagon logo are registered trademarks of Hexagon AB or its subsidiaries.
Microsoft and Windows are registered trademarks of Microsoft Corporation. ACIS is a registered trademark of SPATIAL
TECHNOLOGY, INC. Infragistics, Presentation Layer Framework, ActiveTreeView Ctrl, ProtoViewCtl, ActiveThreed Ctrl,
ActiveListBar Ctrl, ActiveSplitter, ActiveToolbars Ctrl, ActiveToolbars Plus Ctrl, and ProtoView are trademarks of Infragistics, Inc.
Incorporates portions of 2D DCM, 3D DCM, and HLM by Siemens Product Lifecycle Management Software III (GB) Ltd. All rights
reserved. Gigasoft is a registered trademark, and ProEssentials a trademark of Gigasoft, Inc. VideoSoft and VXFlexGrid are either
registered trademarks or trademarks of ComponentOne LLC 1991-2018, All rights reserved. Oracle, JD Edwards, PeopleSoft, and
Retek are registered trademarks of Oracle Corporation and/or its affiliates. Tribon is a trademark of AVEVA Group plc. Alma and
act/cut are trademarks of the Alma company. Other brands and product names are trademarks of their respective owners.

Intergraph Smart® 3D Electrical User's Guide 3

Contents
Preface ........................................................................................................................................................ 11
What's New in Electrical........................................................................................................................ 11

Electrical ..................................................................................................................................................... 12
The Routing Paradigm .......................................................................................................................... 14
Cableways ............................................................................................................................................. 16
Cable Trays ........................................................................................................................................... 17
Conduits ................................................................................................................................................ 19
Cabling .................................................................................................................................................. 22
Duct Banks ............................................................................................................................................ 24
Permission Groups and Routing ........................................................................................................... 27
Moving Route Objects ........................................................................................................................... 29
Move a cableway run ...................................................................................................................... 34
Move a cableway branch ................................................................................................................ 34
Move a straight cableway feature ................................................................................................... 35
Move a set of cableway features .................................................................................................... 36
Move a cableway turn..................................................................................................................... 37
Move a transition ............................................................................................................................ 37
Move a conduit run ......................................................................................................................... 38
Move a straight conduit .................................................................................................................. 39
Move a set of conduit features ....................................................................................................... 41
Move a conduit turn ........................................................................................................................ 42
Move a conduit branch ................................................................................................................... 43
Move a conduit end ........................................................................................................................ 44
Move duct bank .............................................................................................................................. 45
Move a cableway component ......................................................................................................... 45
Move a conduit component ............................................................................................................ 46
Delete Route Objects ............................................................................................................................ 47
Delete a cableway run .................................................................................................................... 48
Delete a cableway branch .............................................................................................................. 49
Delete a cable tray with barriers ..................................................................................................... 49
Delete a cable tray barrier .............................................................................................................. 49
Delete a straight cableway feature ................................................................................................. 49
Delete a cableway turn ................................................................................................................... 50
Delete a cableway transition .......................................................................................................... 50
Delete a conduit run ....................................................................................................................... 50
Delete a conduit branch.................................................................................................................. 50
Delete a straight conduit ................................................................................................................. 50
Delete a conduit turn ...................................................................................................................... 51
Delete a duct bank .......................................................................................................................... 51
Delete conduit from duct bank ........................................................................................................ 51
Edit Properties....................................................................................................................................... 53
Edit cableway properties ................................................................................................................ 55
Edit cableway turn feature properties ............................................................................................. 55
Edit cableway straight feature properties ....................................................................................... 56

Intergraph Smart® 3D Electrical User's Guide 4

 Contents

Edit cableway along-leg feature properties .................................................................................... 56

Edit cableway end feature properties ............................................................................................. 56
Edit cableway transition feature properties .................................................................................... 56
Edit cable tray part properties ........................................................................................................ 56
Edit conduit run properties ............................................................................................................. 57
Edit conduit straight feature properties........................................................................................... 57
Edit conduit turn feature properties ................................................................................................ 57
Edit conduit branch feature properties ........................................................................................... 57
Edit conduit end feature properties ................................................................................................ 58
Edit conduit part properties ............................................................................................................ 58
Route Selection Commands ................................................................................................................. 58
Get Cableways ............................................................................................................................... 59
Get Conduit Runs ........................................................................................................................... 59
Get Connected Supports ................................................................................................................ 60
Get Continuously Connected ......................................................................................................... 60
Get Features ................................................................................................................................... 61
Get Runs ........................................................................................................................................ 63

Electrical Workflow ................................................................................................................................... 64

Electrical Common Tasks ..................................................................................................................... 64

Route Cableway ......................................................................................................................................... 66

Routing Cableways and Cable Trays ................................................................................................... 75
Create new cableway ..................................................................................................................... 76
Route using an existing cableway .................................................................................................. 76
Place components while routing cableway..................................................................................... 77
Route cableway with an offset ........................................................................................................ 78
Copy a cableway run ...................................................................................................................... 78
Branch cableway from a turn feature ............................................................................................. 79
Branch cableway from a conduit end feature ................................................................................. 80
Extend existing cableway ............................................................................................................... 80
Flip a cableway part while routing .................................................................................................. 81
Modify multiple cableway cross section sizes ................................................................................ 81
Modify cableway feature cross section shape ................................................................................ 81
Flip a routed cableway tee ............................................................................................................. 82
Choose a working plane ................................................................................................................. 84
Define settings for cableway .......................................................................................................... 84
Define cable tray barriers ............................................................................................................... 84
Delete a cable tray with barriers ..................................................................................................... 85
Modify cable tray barriers ............................................................................................................... 85
Select cableway cross section properties ...................................................................................... 85
Set Offset Reference Dialog Box (Cableway) ................................................................................ 86
Route Multiple, Parallel Cableway Runs ............................................................................................... 87
Route stacked cableways ............................................................................................................... 88
Route side-by-side cableways ........................................................................................................ 89
Routing Duct Banks .............................................................................................................................. 91
Route duct bank ............................................................................................................................. 92
Route a sloped duct bank ............................................................................................................... 93
Modify a duct bank ......................................................................................................................... 93

Intergraph Smart® 3D Electrical User's Guide 5

 Contents

Branch duct banks .......................................................................................................................... 94

Copy a duct bank ............................................................................................................................ 95
Change duct bank turn angle ......................................................................................................... 95
Extend or shorten duct bank .......................................................................................................... 95
Specify Slope Direction Dialog Box (Duct Bank) ............................................................................ 96
Select Insulation Material Dialog Box ............................................................................................. 96
Cableway Settings Dialog Box .............................................................................................................. 98
General Tab (Cableway Settings Dialog Box) ................................................................................ 98
Cross Section Tab (Cableway Settings Dialog Box) .................................................................... 101
Defaults Tab (Cableway Settings Dialog Box) ............................................................................. 102
New Cableway Dialog Box .................................................................................................................. 103
Multi-Route Tab (New Cableway Dialog Box) .............................................................................. 107
Duct Bank Tab (New Cableway Dialog Box) ................................................................................ 108
Barriers Tab (New Cableway Dialog Box) .................................................................................... 111
Select Cableway Dialog Box ............................................................................................................... 112
Cable Tray Component Properties Dialog Box ................................................................................... 113
Cable Tray Part Properties Dialog Box ............................................................................................... 113
Cableway Along Leg Feature Properties Dialog Box.......................................................................... 113
General Tab (Cableway Along Leg Feature Properties Dialog Box) ........................................... 113
Cableway End Feature Properties Dialog Box ................................................................................... 115
General Tab (Cableway End Feature Properties Dialog Box) ..................................................... 115
Cableway Properties Dialog Box ........................................................................................................ 116
General Tab (Cableway Properties Dialog Box) .......................................................................... 116
Cableway Straight Feature Properties Dialog Box ............................................................................. 120
General Tab (Cableway Straight Feature Properties Dialog Box) ............................................... 120
Cross Section Tab (Cableway Straight Feature Properties Dialog Box) ...................................... 122
Cableway Transition Feature Properties Dialog Box .......................................................................... 123
General Tab (Cableway Transition Feature Properties Dialog Box) ............................................ 123
Cross Section Tab (Cableway Transition Feature Properties Dialog Box) .................................. 124
Cableway Turn Feature Properties Dialog Box .................................................................................. 125
General Tab (Cableway Turn Feature Properties Dialog Box) .................................................... 125
Cross Section Tab (Cableway Turn Feature Properties Dialog Box) ........................................... 127
Cableway Turn Transition Feature Properties Dialog Box ................................................................. 128
General Tab (Cableway Turn Transition Feature Properties Dialog Box) ................................... 128
Cross Section Tab (Cableway Turn Transition Feature Properties Dialog Box) .......................... 129

Route Conduit .......................................................................................................................................... 131

Create new conduit ............................................................................................................................. 141
Route using an existing conduit run .................................................................................................... 143
Add conduits to a duct bank ................................................................................................................ 143
Connect conduit end features ............................................................................................................. 143
Place components while routing conduit ............................................................................................ 144
Route conduit with an external offset .................................................................................................. 146
Route conduit with a cardinal point offset ........................................................................................... 148
Copy a conduit run .............................................................................................................................. 149
Extend an existing conduit run ............................................................................................................ 149
Conduit Settings Dialog Box ............................................................................................................... 150
General Tab (Conduit Settings Dialog Box) ................................................................................. 150
Defaults Tab (Conduit Settings Dialog Box) ................................................................................. 153
New Conduit Run Dialog Box ............................................................................................................. 153

Intergraph Smart® 3D Electrical User's Guide 6

 Contents

Select Conduit Dialog Box .................................................................................................................. 157

Set Offset Reference Dialog Box (Conduit) ........................................................................................ 157
Conduit Branch Feature Properties Dialog Box .................................................................................. 159
General Tab (Conduit Branch Feature Properties Dialog Box) .................................................... 159
Conduit Component Properties Dialog Box ........................................................................................ 160
General Tab (Conduit Component Properties Dialog Box) .......................................................... 160
Conduit End Feature Properties Dialog Box ....................................................................................... 162
General Tab (Conduit End Feature Properties Dialog Box) ......................................................... 162
Conduit Part Properties Dialog Box .................................................................................................... 163
Conduit Run Properties Dialog Box .................................................................................................... 163
General Tab (Conduit Run Properties Dialog Box) ...................................................................... 163
Conduit Straight Feature Properties Dialog Box ................................................................................. 166
General Tab (Conduit Straight Feature Properties Dialog Box) ................................................... 166
Conduit Turn Feature Properties Dialog Box ...................................................................................... 168
General Tab (Conduit Turn Feature Properties Dialog Box) ........................................................ 168

Insert Transition ...................................................................................................................................... 170

Create a transition ............................................................................................................................... 177
Create a transition while routing ......................................................................................................... 178
Set alignment options ......................................................................................................................... 180
Select Part Dialog Box ........................................................................................................................ 181
Transition Settings Dialog Box ............................................................................................................ 182
General Tab (Transition Settings Dialog Box) .............................................................................. 182
Cross Section Tab (Transition Settings Dialog Box) .................................................................... 183

Insert Component .................................................................................................................................... 185

Insert a cable tray component ............................................................................................................. 190
Insert a conduit component ................................................................................................................. 191
Insert a cableway component in free space ....................................................................................... 192
Insert a conduit component in free space ........................................................................................... 193
Insert a component while routing ........................................................................................................ 194
Rotate a conduit component ............................................................................................................... 195
Edit component properties .................................................................................................................. 195
Delete a component ............................................................................................................................ 196
Insert Component Settings Dialog Box ............................................................................................... 196
General Tab (Insert Component Settings Dialog Box) ................................................................. 196

Auto Connect Cableways ....................................................................................................................... 199

Route cableways automatically........................................................................................................... 200
Merge two duct bank segments .......................................................................................................... 201
Duct Banks at Pull Pits ........................................................................................................................ 202

Place Equipment ...................................................................................................................................... 203

Place equipment from the catalog ...................................................................................................... 206
Set positioning relationships for equipment ........................................................................................ 207
Place doors from the catalog .............................................................................................................. 208
Place windows from the catalog ......................................................................................................... 209
Edit equipment properties ................................................................................................................... 210

Intergraph Smart® 3D Electrical User's Guide 7

 Contents

Edit equipment relationships ............................................................................................................... 211

Select Equipment Dialog Box ............................................................................................................. 211
Equipment Properties Dialog Box ....................................................................................................... 213
Occurrence Tab (Equipment Properties Dialog Box) ................................................................... 213
Definition Tab (Equipment Properties Dialog Box) ....................................................................... 223
Connection Tab ............................................................................................................................ 223
Insulation Tab ............................................................................................................................... 224

Cables ....................................................................................................................................................... 225

Routing Cable Example ...................................................................................................................... 227
Routing Cable in Disconnected Networks .......................................................................................... 227
Routing Cables in Cable Tray with Barriers ........................................................................................ 229
Insert Cable ......................................................................................................................................... 229
Create a cable .............................................................................................................................. 229
Copy a cable run .......................................................................................................................... 231
Edit cable properties ..................................................................................................................... 231
Edit parallel cable properties ........................................................................................................ 231
Edit paralleled cable properties .................................................................................................... 231
Delete a cable run ........................................................................................................................ 231
Delete a parallel cable .................................................................................................................. 231
Delete a paralleled cable .............................................................................................................. 232
Select Part Number Dialog Box .................................................................................................... 232
Cable Properties Dialog Box ........................................................................................................ 234
Edit Cable Path ................................................................................................................................... 236
Edit cable path manually .............................................................................................................. 239
Edit cable path using AutoRoute .................................................................................................. 241
Set avoidance features ................................................................................................................. 242
Set way features ........................................................................................................................... 242
Copy cable path ............................................................................................................................ 243
Order features for autorouting cable ............................................................................................ 243
Re-route part of a path ................................................................................................................. 244
Cable Selection Dialog Box .......................................................................................................... 245
Order of Way Features Dialog Box .............................................................................................. 245
AutoRoute ..................................................................................................................................... 245
Set View by Cable ............................................................................................................................... 247
Zoom to cable ............................................................................................................................... 248
Insert Cable Marker ............................................................................................................................ 249
Insert a cable marker .................................................................................................................... 250
Edit cable marker properties ........................................................................................................ 251
Move a cable marker .................................................................................................................... 252
Delete a cable marker .................................................................................................................. 252
Cable Marker Properties Dialog Box ............................................................................................ 252

Insert Split ................................................................................................................................................ 254

Insert multiple cable tray splits ............................................................................................................ 257
Insert a single cable tray split .............................................................................................................. 259
Insert a single cableway split .............................................................................................................. 260

Intergraph Smart® 3D Electrical User's Guide 8

 Contents

Sequence Objects ................................................................................................................................... 261

Sequence a conduit ............................................................................................................................ 262
Sequence a cable tray ........................................................................................................................ 262
Sequence a WBS item ........................................................................................................................ 262

Quick Route ............................................................................................................................................. 263

Join two existing cableways ................................................................................................................ 270
Join two existing cableways at a branch point .................................................................................... 270
Join a cableway from a nozzle or port ................................................................................................ 271
Join cableway from a nozzle or port at a branch point ....................................................................... 273
Join two existing conduits ................................................................................................................... 275
Join two existing conduits at a branch point ....................................................................................... 275
Join a conduit from a nozzle or port .................................................................................................... 276
Join a conduit from a nozzle or port at a branch point ........................................................................ 278

Disconnect Command ............................................................................................................................. 280

Disconnect a cableway ....................................................................................................................... 281
Disconnect a conduit run .................................................................................................................... 281
Disconnect a cableway feature ........................................................................................................... 282
Disconnect a conduit feature .............................................................................................................. 283
Disconnect a set of cableway features ............................................................................................... 283
Disconnect a set of conduit features ................................................................................................... 284
Undo Disconnection ............................................................................................................................ 284

View Cable Schedule............................................................................................................................... 285

Viewing Retrieved Cables ................................................................................................................... 285
Import cables....................................................................................................................................... 286
Cable Schedule Documents Dialog Box ............................................................................................. 287
Cable Schedule Dialog Box ................................................................................................................ 288

Appendix: Property Dialog Boxes ......................................................................................................... 290

Configuration Tab................................................................................................................................ 290
Transfer Ownership Dialog Box ................................................................................................... 291
Connections Tab ................................................................................................................................. 292
Definition Tab ...................................................................................................................................... 292
Default Property Values Tab ............................................................................................................... 292
Notes Tab............................................................................................................................................ 299
Relationships Tab ............................................................................................................................... 300
Occurrence Tab .................................................................................................................................. 300
Select System Dialog Box ................................................................................................................... 305

Appendix: Deleting at Boundary Connections ..................................................................................... 306

Cable tray to cable tray connections ................................................................................................... 306
Conduit run to conduit run connections .............................................................................................. 309
Header to branch connections ............................................................................................................ 311
Conduit header to branch connections ............................................................................................... 314

Intergraph Smart® 3D Electrical User's Guide 9

 Contents

Appendix: Moving at Boundary Connections ...................................................................................... 317

Connecting cable trays or cableways using Move .............................................................................. 317
Connecting conduit runs using Move .................................................................................................. 321
Disconnecting cable trays using Move ............................................................................................... 323
Cable tray to cable tray connections ............................................................................................ 324
Conduit run to conduit run connections ........................................................................................ 326
Header to branch connections ..................................................................................................... 327
Conduit header to branch connections ......................................................................................... 328

Appendix: Cable Autorouting ................................................................................................................ 329

Appendix: Sharing Cable Data with SmartPlant Electrical ................................................................. 332

Overall Workflow ................................................................................................................................. 333
Retrieving Cable Data ......................................................................................................................... 336
View Cable Schedule ................................................................................................................... 336
Publishing 3D Data ............................................................................................................................. 341
3D Model Data .............................................................................................................................. 341
3D Model Data Component Common Tasks ............................................................................... 342
Setup (3D Model Data Component) ............................................................................................. 343

Glossary ................................................................................................................................................... 347

Index ......................................................................................................................................................... 370

Intergraph Smart® 3D Electrical User's Guide 10

Preface
This document is a user's guide for the Electrical functionality of Intergraph Smart® 3D and
provides command reference information and procedural instructions.

Documentation Comments
For the latest support information for this product, comments or suggestions about this
documentation, and documentation updates for supported software versions, please visit
Intergraph Smart® Support (https://smartsupport.intergraph.com).

What's New in Electrical

The following changes have been made to the Electrical task.
Version 2018 (12.0)
▪ The Route Selection commands have been expanded to allow the selection of features and
runs when a part is selected, or to select the features of a selected run. For more
information, see Route Selection Commands (on page 58). (P2 CP:295789)
▪ You can insert a component in free space as the beginning of a cableway or conduit run.
For more information, see Insert a cableway component in free space (on page 192), and
Insert a conduit component in free space (on page 193). (P2 CP:59559)
▪ Added a new <Load More Runs> option to the Run box on the Route Cableway Ribbon
and Route Conduit Ribbon, and to the corresponding properties' dialog boxes. For more
information, see Route Cableway (on page 66), and Route Conduit (on page 131). (P2
CP:319869)
▪ Reporting Type property is now by default determined by specification. For more
information, see Occurrence Tab (on page 300). (P2 CP:314160)
▪ Quick Route now honors user-defined default settings. For more information, see Quick
Route (on page 263). (P2 CP:315911)
▪ Added information about free leg behavior. For more information, see Free Leg in Moving
Route Objects (on page 29). (P1 CP:318434)

Intergraph Smart® 3D Electrical User's Guide 11

SECTION 1

Electrical
The Electrical task uses point-by-point route design to insert cableway, cable tray, and conduit
components into a 3-D model. After routing the cableway, cable tray, and conduit components,
you can place cables to route through them.
A cableway represents a path for a cable tray or bare cables. The cableway has no
physical counterpart; it simply reserves space. Cable tray, on the other hand, does have a
physical counterpart.
For models that include underground placement of electrical cables, the software provides a
duct bank option which allows you to draw the cableway and place conduits at the same time.
The duct bank object lets you design conduits of the same specifications or individualize each
conduit run, if needed.

Electrical Systems
Electrical systems are a way of organizing electrical objects such as cableways and conduits,
within the system hierarchy of your model. You also use the electrical system to control the
specifications that can be used within the system, such as conduit, cableway, and cable tray
specifications.
You can create and organize electrical systems using any criteria you choose. For example, you
could base an electrical system on the area where the objects are located; you could also base
an electrical system on the designer who models the cableway.
You create electrical systems in the Systems and Specifications task or by right-clicking the
objects on the System tab in Workspace Explorer. Electrical systems can later be reorganized
in the system hierarchy based on your access privileges to the permission groups.
The Electrical task includes the following commands:

Select - Resets all commands and allows you to select objects in the model. For more
information, see Select in the Common User's Guide.

Route Cableway - Creates a new cableway, duct bank, or cable tray; extends an existing
run; or routes to an end feature. For more information, see Route Cableway (on page 66).

Route Conduit - Creates a new conduit run or extends an existing run. For more
information, see Route Conduit (on page 131).

Insert Transition - Adjusts the cableway to accommodate combinations of change in

shape and size, manually places and modifies a transition, and indirectly changes a cross-
section in the cableway routing. For more information, see Insert Transition (on page 170).

Insert Component - Adds a component into a cableway or conduit run. For more
information, see Insert Component (on page 185).

Intergraph Smart® 3D Electrical User's Guide 12

 Electrical

Auto Connect Cableways - Automatically places the fittings needed to connect a

cableway. Zero spec cableway (Cws-0) is routed between existing cableways and the
new cableway is automatically placed. For more information, see Auto Connect Cableways
(on page 199).

Place Equipment - Selects any equipment from the Catalog and places it in the model
and modifies the offset of the equipment and its relationships. You can mate, connect, or
align equipment, and precisely position the equipment. For more information, see Place
Equipment (on page 203).

Insert Cable - Creates a new cable run in the model. You define the properties of the
cable run by defining the relationship of the cable run to other objects in the model, such
as pieces of equipment or electrical cabinets. For more information, see Insert Cable (on
page 229).

Edit Cable Path - Routes cables through the various cableway trunks and conduits that
exist in the model. You can force the cable to go through a particular cableway or force the
cable to detour a particular cableway. For more information, see Edit Cable Path (on page
236).

Insert Cable Marker - Places cable markers at points along cableway or conduit features.
For more information, see Insert Cable Marker (on page 249).

Insert Split - Places a splice plate or other type of split in the selected cable tray. For more
information, see Insert Split (on page 254).

Sequence Objects - Renames objects in the selected conduit, cable tray, or WBS item
such that the names are in order, based on topology. For more information, see Sequence
Objects (on page 261).

Quick Route - Joins two existing cable tray or conduit segments in the model. For more
information, see Quick Route (on page 263).

Set View by Cable - Assists the designer when routing cable by only showing objects of
interest and hiding non-applicable objects in the model. This command is located on the
View menu. For more information, see Set View by Cable (on page 247).

View Cable Schedule - Displays a list of the retrieved cable schedule documents. This
command is located on the SmartPlant menu. For more information, see View Cable
Schedule (on page 285).

In This Section
The Routing Paradigm ................................................................... 14
Cableways ..................................................................................... 16
Cable Trays ................................................................................... 17
Conduits ......................................................................................... 19
Cabling ........................................................................................... 22
Duct Banks .................................................................................... 24
Permission Groups and Routing .................................................... 27

Intergraph Smart® 3D Electrical User's Guide 13

 Electrical

Moving Route Objects ................................................................... 29

Delete Route Objects..................................................................... 47
Edit Properties ............................................................................... 53
Route Selection Commands .......................................................... 58

The Routing Paradigm

The routing process is the same for cableway, cable tray, conduits, cables, and duct banks. The
following terms describe the different objects that you might work with during a modeling
session:
▪ Run - An unordered list of items that make up the routing entity with which you are working.
In other words, the length of your cableway from start to finish.
Leg - A leg is a set of continuously connected features routed in the same direction.
▪ You can modify a leg by selecting a straight feature or by using the On Same
Leg command available on the right-click menu. For more information, see Get
Features.
▪ Feature - An object that comprises part of a routing entity in the model. You are free to
move the feature at any time during the design process. Features are designs with intent;
that is, you use features to route the entity to suit your model's design. Features include the
following:
▪ Along-leg feature - A logical object that represents a feature along the leg of a cable
way, such as a tee.
▪ End feature - An object that represents either end of the routing entity.
▪ Straight feature - An object that represents a straight section of the routing entity.
▪ Turn feature - An object that composes part of a routing entity in the model. The turn
feature represents a change in direction for the routing entity.
▪ Transition feature - An object that represents a change of cross-section of the routing
entity.
▪ Parent feature - An object that represents a feature that includes an additional feature,
such as an insulated straight feature.
▪ Part - Item selected from a catalog, such as elbows or tees that allow you to turn corners.
▪ Port - An open end of a part.
▪ Connection - The junction where a port meets the routing entity or another part. The
connection can be sealed or unsealed.
▪ Connection Item - Items that seal a connection, such as welds or bolts.
▪ Boundary connection - A boundary is a port of the terminal object in a select set.
Boundaries can exist at line change, run change, branch point, and at split.

Intergraph Smart® 3D Electrical User's Guide 14

 Electrical

The following image displays the relationships between some of these objects:

Intergraph Smart® 3D Electrical User's Guide 15

 Electrical

Cableways
Cableways are logical objects used in the 3D model to reserve space for cable trays and cable.
The reserved space also allows interference checking along the route. That is, if any other
object is in the same space, a clash results which can be resolved in the modeling phase.

Cableway Run
A cableway run is a connected series of features that normally have the same specification. All
cableway features belong to a run.

Cableway Features
When you route a cableway, you place features as you go. These features define high-level
design information that allows you to create your model to your requirements. As you route
cableway, the software automatically selects specific parts based on the specification of the run.
You may freely move features about at any time during the design process.
The following illustration shows a cableway run and its features.

1 - End Features
2 - Along-Leg Feature (highlighted)
3 - Turn Features
4 - Straight Features
5 - Transition Feature

▪ By default, the software uses fast mode routing, which means that you do not see elbows
and turns graphics appear while in dynamic display. You can toggle fast mode routing on
and off by pressing SHIFT+F.
▪ When you start routing a branch from a cableway, the branch does not inherit all the
properties from the header run. However, the Specification, Fill Efficiency, Signal Type,
and Voltage Grade boxes inherit the values from the header run. (A header run is the main
length of cableway from which other cableways can branch into or out of.)
▪ You must use zero-spec cableway (Cws-0) in your cableway network if you want to later
route cable across gaps in the tray. For more information, see Routing Cable in
Disconnected Networks (on page 227).

Intergraph Smart® 3D Electrical User's Guide 16

 Electrical

Cable Trays
A cable tray is a physical unit that supports and routes cable.

Cable Tray Run

A cable tray run is a connected series of cable tray features that normally have the same
specification. Cable tray features belong to a corresponding cable tray run.

Cable Tray Barriers

You can use barriers to divide a cable tray into lengthwise partitions. Each partition is treated as
a separate cable tray, so that you can route cables of supported signal type. The following
illustration shows how one barrier creates two partitions and two barriers create three partitions
and so on. Smart 3D reports all the cables it supports, as well as the cumulative loads of all the
zones.

Enclosing Run and Enclosed Run

To modify a cable tray partition, select Enclosed Runs from the Locate Filter. To select an
entire cable tray select Enclosing Runs.

Enclosing Run Enclosed Run

Intergraph Smart® 3D Electrical User's Guide 17

 Electrical

Cable Tray Features

When you are routing cable tray, the software automatically selects the specific parts for the
features based on the specification of the run. You may freely move features about at any time
during the design process.
The following illustration shows a cable tray network and some of its features.

As the cable trays are modified, cable lengths are automatically adjusted. When new cables are
added, the fill of the cable tray is calculated. You can view the maximum fill on the ribbon or
Properties dialog box for straight features. When you click on MaxFill command, the software
highlights the portion of the cable tray with maximum cable fill.

Intergraph Smart® 3D Electrical User's Guide 18

 Electrical

Conduits
Conduits are the hollow tubing used to house and protect cables. If you are routing duct banks,
you can define the conduits to be drawn simultaneously with the encasement. If necessary, you
can modify the conduit design later.

Conduit Runs
A conduit run is a connected series of features that usually have the same specification. A
conduit run includes straight features; along-leg features such as branches, transitions, and
reducers; turn features; and end features.

Conduit Features
All conduit features belong to a corresponding run. When you route a conduit run, you place
conduit features as you go that define high-level design information. You can move the features
at any time during the design process.

By default, the software uses fast mode routing, which means that you do not see
elbow or turn graphics while in dynamics. You can toggle fast mode routing on and off by
pressing SHIFT+F.

Intergraph Smart® 3D Electrical User's Guide 19

 Electrical

Conduit Parts
Conduit parts are the physical components that compose a conduit feature. Part size and
properties depend on the specification. The software selects the specific parts based on the
specification of the run. You can select conduit parts from the catalog to place in your conduit
network. Examples of conduit parts include couplings, unions, and tees.

Connecting Conduits
The software automatically generates connections when you join components together.
Connections will either generate parts or not generate parts (implied connection parts)
depending on the type.
Connections are used at the junction of conduit parts, conduit to equipment, and conduit to
cable tray and cable tray parts. The behavior of conduit connections matches piping
connections. Connections are created when a straight feature joins another straight feature, and
when a conduit joins equipment.

A relationship is created when you route a cableway from a conduit end feature, or the reverse,
but not when you route a cable tray from a conduit end feature, or the reverse.
You can view the connection properties using the Edit > Properties command or generate
reports for the connection information. You can also change a generated connection part with
another part if it exists in the current specification. To edit or replace the connection part, use the
connection property pages.

Intergraph Smart® 3D Electrical User's Guide 20

 Electrical

Connecting Conduits to Equipment

Conduit connects to equipment at a conduit port location. The software automatically places a
connection part based on the default part listed in the catalog. The part generation depends on
the connecting end preparations and the conduit properties. For example, if the conduit
connection is threaded, the conduit threads directly into the equipment surface. Because of the
direct connection, the software does not generate a connection part.

Copying equipment does not affect any cables or conduit connected to the original equipment.
Also, modifying equipment does not affect any cables or connected conduit unless you modify
the port. If you change the port size of an equipment nozzle, the software places a reducer at
the junction of the connected conduit.

Differences Between Conduits and Piping

The process of routing conduits and pipes share many conceptual similarities. However,
differences do exist between the two disciplines.
▪ Conduit routing does not import data from any schematic drawing tool, such as a P&ID.
▪ Conduit does not have insulation.
▪ As compared to piping, conduit does not have property for fluid, flow direction, insulation,
heat tracing, or jacketed piping.
▪ Conduit does not have temperature limits.
▪ No welds are required for conduit. Unlike piping, all conduit fitting connections are threaded
in male/female connections and compression types.
▪ Branch reporting ownership does not apply to conduit.
▪ Conduit does not have isometric drawing output, but only orthographic drawings.
▪ Conduit does not have bolted or through-bolted connections.
▪ Nuts or washers are not associated with conduit.
▪ You can use gaskets in conduit clamped or compression connections.
▪ Standard reports and material take-off reports do apply to conduit.
▪ For conduit, you can insert splits, such as couplings and unions, with the Insert Component
command. For piping, you use the Insert Split command.
▪ The nominal diameter for conduit is specified as the inside diameter, similar to small bore
piping. Reference data stores this information.

Intergraph Smart® 3D Electrical User's Guide 21

 Electrical

▪ Conduit does not have a system level corresponding to pipelines.

▪ You cannot place pipes in a conduit system, and you cannot place conduit in a pipeline.

Cabling
A cable is a bound or sheathed group of mutually insulated conductors. When working with
cables, the software lets you choose the specific cable type required.

Cable Run
The length of a cable, from start to finish, is called a cable run. A cable run defines the
relationship of the cable to other objects in the model, such as electrical cabinets and
equipment.

Parallel Cables
You can create parallel cables by entering a number greater than 1 for the Parallel Cables
property on the Cable Properties dialog box. The software then creates a parallel cable
(parent) and multiple paralleled cables (children). For more information, see Cable Properties
Dialog Box (on page 234).

Autorouting Cable
You can automatically route cables using AutoRoute on the Edit Cable Path ribbon. After
you define necessary cable properties, originating and terminating equipment information, the
software routes the cable along the shortest path through the cable trays or conduits. If
necessary, you can modify the autorouted path by specifying additional must-include cable trays
or conduits for the selected cable.
You must assign a signal type for the cable, cable trays, and conduits to
autoroute cables.

Editing Cable Path

After the software automatically routes the cable, you can edit the cable path so that the cable
runs through the selected cable trays and conduits. To define the path manually, select the entry
point, the way features through which the cable should pass, and then the exit point.

If you do not have cableways and conduit in your model, use the Route Cableway
and Route Conduit commands to create them.

Max Fill
As you route a cable, you can view the maximum fill for the cable tray or conduit by checking the
Max Fill box on the ribbon. If you click Max Fill, the software highlights the corresponding tray
or conduit containing the maximum fill. The software also calculates the maximum fill during the
autorouting process. You can allow overfilling of the cable trays or allow real-time fill calculations
during the routing process.

Intergraph Smart® 3D Electrical User's Guide 22

 Electrical

Fill calculations are based on the National Electrical Code (NEC) standard. The software
performs the calculations using a Microsoft Visual Studio module that can be customized based
on the project requirements.

▪ You can use surface style rules to show which cable trays are full and which trays are nearly
full.
▪ You can run a cable fill report for cable trays and conduits.

Place Cable Markers

Cable markers are placed on cableways or conduit features to designate the path of the cables.
After being placed, the cable markers can be used to describe a cable path on a cable-routing
report.

Intergraph Smart® 3D Electrical User's Guide 23

 Electrical

Duct Banks
A duct bank is the concrete-encased underground container used for laying conduits for electric
and telephone lines, as well as other utilities. In general, two or more conduits routed side-by-
side create a bank. Duct banks are generally sloped to drain off condensation.

A duct bank system consists of the following:

▪ Duct banks entering the ground
▪ Duct banks exchanging cables at pull pits or manholes
▪ Duct banks emerging from the ground
The software allows you to route both the casing and its conduits simultaneously. You can later
customize each conduit, as necessary. In addition, you can also join a conduit in one duct bank
with a conduit in another duct bank at a pull pit or manhole using the Auto Connect command.
After modeling, you can generate drawings and reports for the duct banks.

You create duct banks using the Route Cableway command. On the Create New Run
dialog box, you select the duct bank specification and the Multi-Route tab changes to the Duct
Bank tab. You use this tab to design the duct bank. You can set all conduits to the same size
and relative position, or you can define the individual conduit runs on the Duct Bank tab. For
more information, see Routing Duct Banks (on page 91).

Recommended Work Flow

We recommend that you route the entire duct bank as a continuous segment. Routing two or
more discontinuous segments might duplicate the cross-section values for each segment. You
need to resolve any incompatibilities that might arise during the merging of discontinuous
segments.

Modifying Duct Banks

After you have modeled the duct bank, you might need to modify it. The available modifications
include the following:

Intergraph Smart® 3D Electrical User's Guide 24

 Electrical

▪ Delete or move the duct bank as a whole or move a section of the duct bank.
▪ Extend or shrink the duct bank.
▪ Change the angle of the turns.
▪ Modify the relative position of a conduit in a duct bank.
▪ Add or remove conduit from the duct bank.
▪ Merge two segments of a duct bank.
Before merging two duct bank segments, make sure that the conduits have
matching cross-sections and signal types or merge the two segments using Auto Connect.

Pull Pits and Manholes

Pull pits are concrete chambers where a cable from a conduit in one duct bank is fed to a
conduit in another duct bank. Use Place Equipment to place the pull pit. You can route duct
banks out of the pull pit. To route cables in the duct bank, the cable paths must be contiguous.
Use Auto Connect and zero-spec cableway (Cws-0) to connect the conduits at the pull pit. For
more information, see Auto Connect Cableways (on page 199) to easily connect the conduits.

Intergraph Smart® 3D Electrical User's Guide 25

 Electrical

Branching Duct Banks

A duct bank might need to branch at some point to reach all its destinations. When branching
occurs, the number of conduits from the original duct bank might not match the number of
conduits in the branch. That is, each branch may carry only a subset of the original conduits.

▪ To route duct banks, select the DBS-0 duct bank specification on the New Cableway dialog
box.
▪ To successfully move the duct bank, select the entire duct bank: conduits and encasement.
▪ Use Format > Surface Style Rules to set the pull pit color to translucent so that you can
accurately branch the cables. You can also set the encasement color to translucent. Setting
the encasement to translucent is also helpful. You can set the colors use Format > Surface
Style Rules.
▪ On the Duct Bank tab cross section, row 1 (x) is at the bottom and column 1 (y) is on the
left.

Enclosing Run and Enclosed Run

To modify a conduit in the duct bank, select Enclosed Runs from the Locate Filter. To select
an entire duct run select Enclosing Runs.

Enclosing Run Enclosed Run

Intergraph Smart® 3D Electrical User's Guide 26

 Electrical

Permission Groups and Routing

Several different users in different permission groups can work together when routing if you
know how the software handles the different situations. Starting in version 6.0, Electrical fully
supports different users, with different sets of privileges, working on different runs such as when
working in a Global Workshare Configuration.
The software creates an Intermediate End Feature (IEF) at the end of a pipe run connected to
another pipe run and creates a logical connection between the two IEFs/runs. Everything can be
in the same permission group.

Assignment of Permission Groups

The first thing to know is how permission groups are assigned:
▪ Objects that you create directly are assigned to the active permission group.
▪ Objects created automatically by the software are assigned a permission group determined
by an internal set of rules. The permission group assigned is not necessarily the active
permission group. Examples of automatically placed objects include connections and a pipe
automatically inserted when two touching valves are separated.
▪ Parts generated by features are assigned the permission group of the parent feature.
Remember, however, that runs can be in a different permission group than its collective
features and parts.
▪ End features use the permission group of the run to which they belong.
▪ Connections use the permission group of the parts to which they are connected. If the
connection is between parts with different permission groups, the permission group to which
the user has write access is used. If the connection is between an equipment nozzle and a
route part, the route part permission group is used for the connection.
▪ Piping connection objects (welds, bolt sets, gaskets, clamps) use the permission group of
the connection that generated it.

Systems and Permission Groups

A system is a logical grouping of sub-systems. When you add or remove a sub-system, you are
modifying the definition of the parent system. Therefore, you must have write access to the
parent system. You do not need write access to the grandparent system. For example, to create
a pipe run, you need write access to the parent pipeline. However, you do not need access to
the system to which the pipeline belongs.
When participating in a Global Workshare Configuration, you must manage all permission
groups at the host site. The sub- system requirement to have write access to its parent system
is not possible if the sub-system's permission group is created at the satellite site and the parent
system's permission group is created at the host site.
For example, your host site is Houston and your satellite site is London. You create a system
called "Pipe Rack 100" and its controlling permission group in Houston. You assign user John,
who works in London, write access. During the workshare replication process, the "Pipe Rack
100" system and permission group is "duplicated" in London. In London, John can add columns,
beams, braces and whatever else he wants to the "Pipe Rack 100" system because John was
given write access to the system's permission group in Houston. John cannot delete or change
any of the properties of the "Pipe Rack 100" system in London because the host site, Houston,
owns it. He can only "add" objects to the system. If John were to travel to Houston and log on

Intergraph Smart® 3D Electrical User's Guide 27

 Electrical

there, he could delete or change any of the properties of the "Pipe Rack 100" system because
the Houston host site owns it.

Example Configuration A
In this example, two users, John and Peter, are working on the same run with exclusive access.
John is responsible for part of the run, and Peter is responsible for the other part of the run.
Neither John nor Peter should be able to modify the work of the other person. The administrator
should configure the permission groups as follows:
▪ Create three different permission groups: PG-Run, PG-John, and PG-Peter. Both John and
Peter should have full control access to PG-Run. John should have full control access to
PG- John while Peter should have read-only access to PG- John. Peter should have full
control access to PG- Peter while John should have read-only access to PG- Peter.
The run should be created using the PG-Run permission group. When John works on his parts
of the run, he should use PG-John as the active permission group. When Peter works on his
parts of the run, he should use PG-Peter as the active permission group. The two halves of the
run should connect at a component such as a valve (piping) or a union (electrical).
Piping Example: For example, John routes his part of the run, places a flange, and then places a
gate valve. Peter then places a flange manually connecting to the open port of the gate valve,
and then continues his part of the run.
Electrical Example: For example, John routes his part of the run, and places a coupling. Peter
then manually connects to the open port of the coupling, and then continues his part of the run.

Example Configuration B
In this example, two users, John and Peter, are working on different but in-line connected runs
with exclusive access. For example, John places an elbow, a straight piece, and a union, then
stops. Peter connects to the open port of the union, and then continues routing. The
administrator should configure the permission groups as follows:
▪ Create two different permission groups: PG-John and PG-Peter. John should have full
control access to PG-John while Peter should have read-only access to PG-John. Similarly,
Peter should have full control access to PG-Peter while John should have read-only access
to PG-Peter.
John should create the run using the PG-John permission group and route his part of the run.
When Peter works on his part of the run, he should use PG-Peter as the active permission
group. The Intermediate End Features will handle the connection between the two parts of the
run.

Example Configuration C
In this example, two users, John and Peter, are working on different runs connected by
branching components such as a tee. The administrator should configure the permission groups
as follows:
▪ Create two permission groups: PG-John and PG-Peter. John should have full control
access to PG-John while Peter should have read-only access to PG-John. Similarly, Peter
should have full control access to PG-Peter while John should have read-only access to
PG-Peter.
John creates an initial header run using PG-John as the active permission group and routes it
as needed. Peter now wants to branch from John's run. Peter sets PG-Peter as the active

Intergraph Smart® 3D Electrical User's Guide 28

 Electrical

permission group and selects the header in John's run from which to branch. Instead of creating
the header component (such as a tee), the software generates a To Do List item for John.
When John updates the out-of-date To Do List item, the software modifies the header to add
the tee, and then generates a To Do List item for Peter.
When Peter updates his out-of-date To Do List item, the software fixes the branch leg (the end
of the branch leg is adjusted to the tee port). This is called a double hand-shaking mechanism.

Moving Route Objects

After you complete a cableway or conduit run, you can move the run features to alter the route,
connection points, or component placement.
You can move route objects by selecting one or more features using Move on the main
ribbon bar, or using the Move From and Move To commands on the modify feature
ribbon bar. We recommend that you use Move to move large sections of network to maintain
the connectivity. Use Move From and Move To to move a feature.
You can only move a route object if:
▪ you have Full Control or Write access to the permission group the object belongs to,
▪ the object's Approval Status is Working.
You can move the following types of features:

Straight Features
▪ Moving a straight feature moves the entire leg to which the feature is connected.
▪ The move direction is always perpendicular to the axis of the straight feature.
▪ A branch feature connected to the moved leg maintains its original angle.
▪ Movement stops when parts on the associated leg overlap, or when they overlap with
adjacent parts on connected legs.
▪ When equipment moves, the leg moves with the equipment nozzle to remain collinear with
the nozzle as much as possible.
To move straight features, select one of the orientation handles the software displays at the
ends of the straight feature. This is the move-from point. The orientation handles allow you to
move the feature in relation to the edge instead of the centerline. For example, use the
orientation handles to align the bottom of a beam with the top of a beam.

Turn Features
▪ If you move a turn to a position where two adjacent legs are collinear (that is, the turn
reaches 180 degrees), the software deletes the turn.

Intergraph Smart® 3D Electrical User's Guide 29

 Electrical

▪ The turn stops moving when it starts to overlap with an adjacent along-leg feature.

End Features
▪ Moving the end feature changes the length of the straight feature.
▪ Moving the end feature modifies the topology of the turn feature if it is connected to another
leg. The default motion plane is the connected turn feature or along-leg feature.
▪ You cannot move an end feature that is connected to a nozzle.
▪ You cannot move the end feature past the point where the straight feature length becomes
zero, such as the point where an end feature touches a nozzle or a free port of another
feature.

Branch Features
▪ If the branch and header are in the motion plane, the branch feature moves along the
branch leg.
▪ If the branch and header are not in the motion plane, the end of the branch leg and branch
feature move to keep the branch angle constant.
▪ You can move the branch feature along the associated straight feature. As you move the
feature, the software dynamically displays the angle between the branch feature and the
branch leg.

Along-Leg Features
▪ You can move along-leg features along the straight feature on which you placed them. The
software prevents you from moving the along-leg feature past the end of the run, or to a
position that would cause parts to overlap.
▪ Along-leg features that are not branches maintain a constant distance from the fixed end of
the leg.
▪ If an along-leg features such as an elbow or a transition is located at an end of the run, you
can move the run using Move . You need not select the end feature to move.
▪ You can move features only after you finish routing a run and placing components. Edit
commands are not available until you complete routing or placement. You complete routing
by right-clicking or by pressing Esc.

Free Leg
A leg is a set of continuously connected features routed in the same direction. A free leg has an
open end and does not have a straight feature. An offline leg such as a branch is a free leg if it
has an open end.
You can move an entire leg and maintain connectivity by moving any straight feature on that leg.
Use the common Move command to move the straight feature. If the leg does not have a
straight feature, use the Get Features > On Same Leg command on the right-click menu to
select the leg.
With the route selection commands, you can select any section of route network by selecting
any associated straight feature, along-leg feature, or end feature. For more information, see
Route Selection Commands (on page 58).
Cable Trays - Inline Leg

Intergraph Smart® 3D Electrical User's Guide 30

 Electrical

1 Leg 1 Leg 2 does not have a straight feature

and has open end. When you move
2 Leg 2 - Free leg leg 1, the software also moves leg 2.

Inline leg with a straight feature:

1 Leg 1 Leg 2 has a straight feature and an open end.

When you move leg 1, the software shrinks or
2 Leg 2 stretches leg 2 depending on the move
direction.

Cable Trays - Offline Leg

1 Leg 1

Intergraph Smart® 3D Electrical User's Guide 31

 Electrical

2 Leg 2 - Free leg When you move leg 1, the software also moves
leg 2.

Conduits - Inline Leg

1 Leg 1 Leg 2 does not

have a straight
2 Leg 2 - Free leg feature and has
open ends. When
you move leg 1, the
software also
moves leg 2.

Intergraph Smart® 3D Electrical User's Guide 32

 Electrical

1 Leg 1 Leg 2 has a straight feature

and has an open end. When
2 Leg 2 you move leg 1, the
software shrinks or
stretches leg 2 depending
on the move direction.

Conduits - Offline Leg

1 Leg 1 Leg 2 has a straight feature and has an

open end. When you move leg 1, the
2 Leg 2 - Free leg software also moves leg 2.

Boundary Connections
When you move cable trays or conduits at boundary connections, the software modifies the
associated network. For more information, see Appendix: Moving at Boundary Connections (on
page 317).

What do you want to do?

▪ Move a cableway run (on page 34)
▪ Move a straight cableway feature (on page 35)
▪ Move a cableway turn (on page 37)
▪ Move a cableway branch (on page 34)
▪ Move a transition (on page 37)

Intergraph Smart® 3D Electrical User's Guide 33

 Electrical

▪ Move duct bank (on page 45)

▪ Move a conduit run (on page 38)
▪ Move a straight conduit (on page 39)
▪ Move a conduit turn (on page 42)
▪ Move a conduit branch (on page 43)
▪ Move a conduit end (on page 44)
▪ Move a component (see "Move a cableway component" on page 45)
▪ Move a cable marker (on page 252)

Move a cableway run

1. Click Select .
2. Select Cableways in the Locate Filter box.
3. Select the cableway run to move.
4. Select Move on the main ribbon.
5. Select the run, or click in a graphic view to select the move-from location.
Use the end of the run as the move-from location if you are trying to connect the run
to a nozzle or another run.
6. Identify the move-to location in the model by clicking in a graphic view.
For more information on how the software performs the move operation, refer
Appendix: Moving at Boundary Connections (on page 317).

Move a cableway branch

1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the branch that you want to move.

4. Click Move To on the ribbon. If you do not define a starting point by using the Move
From , the software assumes that the current location of the object is the starting point.
5. Move the branch to the new location.

Intergraph Smart® 3D Electrical User's Guide 34

 Electrical

For more information on how the software performs the move operation at boundary
connections, see Appendix: Moving at Boundary Connections (on page 317).

Move a straight cableway feature

1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the cableway feature that you want to move.
4. Set the Lock Length as needed.
5. Select the cableway.
6. Click Move To on the ribbon. If you do not define a starting point using Move From ,
the software assumes that the current location of the object is the starting point.
7. Move the cableway to the new location.

▪ For more information on how the software performs the move operation, see Appendix:
Moving at Boundary Connections (on page 317).
▪ When you move a straight feature, the default working plane is the plane of one of the
adjacent turns. The software selects the turn first by the plane that includes branches, and
then by the plane of larger nominal diameter.
▪ You can select one of the orientation handles displayed at the ends of the straight feature as
the move-from point. These orientation handles allow you to move the feature in relation to
the edge instead of the centerline. For example, you can use the orientation handles to align
the bottom with the top of a beam.

Intergraph Smart® 3D Electrical User's Guide 35

 Electrical

Move a set of cableway features

1. Click Select on the vertical toolbar.
2. In the Locate Filter, select Cableway Features.
3. Select a feature on the cableway section to move.
4. Right-click the feature, and select an option under Get Features. For more information, see
Route Selection Commands (on page 58).
5. Click Move on the main ribbon.
If you move the cableway end within ¼ inch (6.35 mm) of another cableway end, the
software automatically connects the two ends.
6. Select a move-from point.
7. Identify the move-to point, and click the graphic view to confirm the new location.
The software moves the cableway run to the new location.
For more information on how the software performs the move operation, see
Appendix: Moving at Boundary Connections (on page 317).

Connect a Set of Cableway Features

1. Click Select on the vertical toolbar.
2. In the Locate Filter, select Cableway Features.
3. Select a feature in the cableway section to modify.
4. Right-click the feature, and select an option under Get Features. For more information, see
Route Selection Commands (on page 58).
5. Click Move on the main ribbon.
6. Click an end feature in the selection.
7. To connect the selection to another cableway inline, click an open end feature.
-OR-
To connect the selection to another cableway at a branch point, click a straight feature.
The software will lengthen or shorten the cableway length as needed to make the
connection. For more information, see Connecting cable trays or cableways using Move (on
page 317).

Intergraph Smart® 3D Electrical User's Guide 36

 Electrical

Move a cableway turn

1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the turn to move.
4. Click Move To on the ribbon. If you do not define a starting point by using Move From
, the software assumes that the current location of the object is the starting point.
5. Move the turn to the new location. You can use the Angle box to type a new angle for the
turn.
The software moves the turn along the cableway to the specified angle.

Move a transition
1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the transition that you want to move.

4. Click on the transition.

5. On the edit cableway ribbon bar, click Move To .
6. Move the transition to the new location, and click to place the transition.

You can use the Point Along and PinPoint commands to locate the transition
precisely.

Intergraph Smart® 3D Electrical User's Guide 37

 Electrical

Move a conduit run

1. Click Select .
2. In the Locate Filter, select Conduit Runs.
3. Select the conduit run to move.

4. Select Move on the main ribbon.

5. Select a location either on the conduit run or in the model to use as the move-from location.
Use the end of the conduit run as the move-from location if you are trying to connect the
conduit run to a nozzle or another conduit run.

6. Identify the move-to location in the model.

Intergraph Smart® 3D Electrical User's Guide 38

 Electrical

Move a straight conduit

1. Click Select .
2. Select Conduit Features in the Locate Filter box.
3. Select the conduit feature to move.

4. Set the Lock Length as needed.

5. Click Move From on the ribbon, and select the starting point of the move. The software
assumes that the current location of the object is the starting point if you do not define one.

Intergraph Smart® 3D Electrical User's Guide 39

 Electrical

6. Click Move To on the ribbon.

7. Move the conduit to the new location.

▪ When you move a straight feature, the default working plane is the plane of one of the
adjacent turns. The software selects the turn first by the plane that includes branches, and
then by the plane of larger nominal diameter.
▪ You can select one of the orientation handles that are displayed at the ends of the straight
feature as the move from point. These orientation handles allow you to move the feature in
relation to the edge instead of the centerline. For example, you can use the orientation
handles to align the bottom with the top of a beam.

Intergraph Smart® 3D Electrical User's Guide 40

 Electrical

Move a set of conduit features

1. Click Select on the vertical toolbar.
2. In the Locate Filter, select Conduit Features.
3. Select a feature on the conduit section to move.
4. Right-click the feature, and select an option under Get Features. For more information, see
Route Selection Commands (on page 58).
5. Click Move on the main ribbon.
If you move the conduit end within ¼ inch (6.35 mm) of another conduit run end, the
software automatically connects the two ends.
6. Select a move-from point.
7. Identify the move-to point, and click the graphic view to confirm the new location.
The software moves the conduit run to the new location.
For more information on how the software performs the move operation, see
Appendix: Moving at Boundary Connections (on page 317).

Connect a Set of Conduit Features

1. Click Select on the vertical toolbar.
2. In the Locate Filter, select Conduit Features.
3. Select a feature in the conduit section to modify.
4. Right-click the feature, and select an option under Get Features. For more information, see
Route Selection Commands (on page 58).
5. Click Move on the main ribbon.
6. Click an end feature in the selection.
7. To connect the selection to another conduit inline, click an open end feature.
-OR-
To connect the selection to another conduit at a branch point, click on a straight feature.
The software will lengthen or shorten the conduit run length as needed to make the
connection. For more information, see Connecting conduit runs using Move (on page 321).

Intergraph Smart® 3D Electrical User's Guide 41

 Electrical

Move a conduit turn

1. Click Select .
2. Select Conduit Features in the Locate Filter box.
3. Select the turn to move.

4. Click Move To on the ribbon.

If you do not define a starting point by using Move From , the software assumes
that the current location of the object is the starting point.
5. Move the turn to the new location.

Intergraph Smart® 3D Electrical User's Guide 42

 Electrical

Move a conduit branch

1. Click Select .
2. Select Conduit Features in the Locate Filter box.
3. Select the branch to move.

4. Click Move To on the ribbon.

If you do not define a starting point by using Move From , the software assumes
that the current location of the object is the starting point.
5. Move the branch to the new location.

Intergraph Smart® 3D Electrical User's Guide 43

 Electrical

Move a conduit end

1. Click Select .
2. Select Conduit Features in the Locate Filter box.
3. Select the end feature to move.

Make sure that you select the end feature as shown.

4. Click Move To on the ribbon.
5. Move the conduit end to the new location. You can also use the Length box to type a new
length for the conduit.

Intergraph Smart® 3D Electrical User's Guide 44

 Electrical

Move duct bank

You can move a duct bank as a whole or you can move selected sections.
To move a whole duct bank

1. Click Select .
2. Select Enclosing Runs in the Locate Filter box.
3. Click Move on the main ribbon.
4. Select a location on the duct bank to use as the move-from location.
5. Identify the move-to location by clicking in the model.
To move a duct bank selection

1. Click Select .
2. Select CableWay/Conduit Path Features in the Locate Filter box.
3. Select the features you want to move.
You can use QuickPick and CTRL to make your selection.
4. Click Move on the main ribbon.
5. Click in your selection to identify the move-from location.
6. Click in the model to identify the move-to location.

Move a cableway component

1. Click Select .
2. Select Cableway Features in the Locate Filter.
3. Select the component. If you do not select a move from location, the current location of the
object is used as the from location.
4. Click Move To on the ribbon.
5. Move the component to the new location.
You can use the Tools > Point Along and Tools > PinPoint commands to locate
the component precisely.

Intergraph Smart® 3D Electrical User's Guide 45

 Electrical

Move a conduit component

1. Click Select .
2. Select Conduit Features in the Locate Filter.
3. Select the component such as a tee, pull box, or coupling.

4. Click Move To on the ribbon.

If you do not select a move from location, the current location of the object is used
as the from location.
5. Move the component to the new location. You can use the Tools > Point Along and Tools
> PinPoint commands to locate the component precisely.

Intergraph Smart® 3D Electrical User's Guide 46

 Electrical

Delete Route Objects

You can delete route objects to remove unwanted objects. You cannot delete parts directly.
When you delete any route object, the software attempts to maintain the design integrity of the
model by deleting connections, mating parts, and adjusting all previously connected features.

▪ You cannot delete a route object in non-working approval status, such as Approved, In
Review, and Rejected.
▪ You can delete a route object only if it is in working state. In a Global Workshare
Configuration, if you delete an object at your location that is connected to an object at a
different location, the software generates a To Do Record to delete connections. You must
have Write access to update the To Do Record.
▪ When you delete a route object connected to an object in non working approval status, the
software does not delete the connection and its associated system-generated parts such as
mating parts or transitions. The software generates a To Do Record for that part. You must
have Write access to update the To Do Record.
The behavior of various objects during deletion is detailed below:

Cableway, Conduit, and Cable Runs

▪ Deleting the run deletes all features (and thereby all parts) belonging to the run.
▪ The software cuts the run legs at all boundaries and creates gaps. The software neither
extends nor inserts a straight feature.
▪ When a parallel cable is deleted, all its children paralleled cables are deleted as well. A
paralleled cable can be deleted without affecting its parent or siblings.

Straight Features
▪ The straight feature connected by the associated turn feature is extended to the turn point.
▪ Deleting a straight feature does not delete any adjacent branch features if the straight
feature is connected to the branch port of the feature. For tee-type branches, the software
replaces the header portion of the deleted branch feature with a straight feature.
▪ If the straight feature connects to a component, the software does not delete the component
when the straight feature is deleted.

Turn Features
▪ Straight features connected to the deleted turn extend to the turn point.
▪ Deleting a turn feature does not remove all adjacent run change features and mating parts.
▪ When a branch feature is adjacent to the turn feature, the software inserts a straight feature
to avoid deleting a branch.

Inline Components or Split Features

▪ If an inline component is deleted, the software merges the two connected straight features,
forming one straight feature, provided they share the same parent run and the same
dimensions.

Intergraph Smart® 3D Electrical User's Guide 47

 Electrical

Boundary Connections
When you delete route objects at boundary connections, the software deletes all associated
boundary connections with few exceptions related to permission groups, approval status and
Global Workshare configuration. For more information, see Appendix: Deleting at Boundary
Connections (on page 306).

What do you want to do?

▪ Delete a cableway run (on page 48)
▪ Delete a straight cableway feature (on page 49)
▪ Delete a cableway turn (on page 50)
▪ Delete a cableway branch (on page 49)
▪ Delete a cableway transition (on page 50)
▪ Delete a duct bank (on page 51)
▪ Delete a conduit run (on page 50)
▪ Delete a straight conduit (on page 50)
▪ Delete a conduit turn (on page 51)
▪ Delete a conduit branch (on page 50)
▪ Delete a component (on page 196)
▪ Delete a cable run (on page 231)
▪ Delete a parallel cable (on page 231)
▪ Delete a paralleled cable (on page 232)
▪ Delete a cable marker (on page 252)

Delete a cableway run

1. Click Select .
2. In the Locate Filter, select Cableways.
3. Select the cableway run to delete.
4. Click Delete .
For more information on how the software performs the delete operation, see
Appendix: Deleting at Boundary Connections (on page 306).

Intergraph Smart® 3D Electrical User's Guide 48

 Electrical

Delete a cableway branch

1. Click Select.
2. In the Locate Filter box, select Cableway Features.
3. Select the branch to delete.
4. Click Delete .
For more information on how the software performs the delete operation, see
Appendix: Deleting at Boundary Connections (on page 306).

Delete a cable tray with barriers

1. Click Select .
2. Select Enclosing Runs in the Locate Filter box.
3. Select the cable tray run to delete.
4. Click Delete .
The software deletes the cable tray including the barriers. If the cable tray carries cables,
the Route status of the cables is set to incomplete.

Delete a cable tray barrier

1. Click Select .
2. Select Enclosed Runs in the Locate Filter box.
3. Select the partition to delete.
4. Click Delete .
The software deletes the barrier and merges the partition with the adjacent. If the partition
carries a cable, the Route status of the cable is set to incomplete.
The software renders the last remaining partition into a cable tray, and the signal type
of that partition is assigned to the cable tray.

Delete a straight cableway feature

1. Click Select .
2. In the Locate Filter box, select Cableway Features.
3. Select the cableway feature to delete.
4. Click Delete .
For more information on how the software performs the delete operation, see
Appendix: Deleting at Boundary Connections (on page 306).

Intergraph Smart® 3D Electrical User's Guide 49

 Electrical

Delete a cableway turn

1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the turn to delete.
4. Click Delete .

Delete a cableway transition

1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the transition to delete.
4. Click Delete .

Delete a conduit run

1. Click Select .
2. Select Conduit Runs in the Locate Filter box.
3. Select the run to delete.
4. Click Delete .

Delete a conduit branch

1. Click Select .
2. Select Conduit Features in the Locate Filter box.
3. Select the branch to delete.
4. Click Delete .

Delete a straight conduit

1. Click Select .
2. Select Conduit Features in the Locate Filter box.
3. Select the straight feature to delete.
4. Click Delete .

Intergraph Smart® 3D Electrical User's Guide 50

 Electrical

Delete a conduit turn

1. Click Select .
2. Select Conduit Features in the Locate Filter box.
3. Select the turn to delete.
4. Click Delete .

Delete a duct bank

1. Click Select .
2. In the Locate Filter box, select Enclosing Runs.
3. Select the duct bank to delete.
4. Click Delete .

Delete conduit from duct bank

To delete a whole conduit run

1. Click Select .
2. Select Enclosing Runs in the Locate Filter box.
3. Select the duct bank.
The Duct Bank Properties dialog box displays.
4. Under the Duct Bank tab, select the conduit run number from the Select Item for
Modification box.
5. Click Delete Conduit Run .
6. Click OK.
The software deletes the selected conduit.
To delete a conduit selection

1. Click Select .
2. Select Enclosed Runs in the Locate Filter.

Intergraph Smart® 3D Electrical User's Guide 51

 Electrical

3. Select the conduit run to delete.

4. Click Delete .
The software deletes the selected conduit.

Intergraph Smart® 3D Electrical User's Guide 52

 Electrical

Edit Properties
You can edit the properties of a cableway, duct bank, cable tray, conduit, and cable. Use the
Locate Filter and Select to select the type of object that you want to edit.
The Locate Filter box contains the available, pre-defined filters for
the Select command. When you choose a filter in the Locate Filter
box, the software allows you to select only the filtered objects in a
graphic view and in the Workspace Explorer. For example, if you
select Cables, you can select only cable runs in a graphic view or in the Workspace Explorer.
The Electrical task includes these filters:
Cable Markers
Allows you to select markers on cable runs. You can place markers with the Insert Cable
Marker command.
Cable Tray Nozzles
Allows you to select cable tray nozzles in the model.
Cable Tray Parts
Allows you to select cable tray parts in the model or in the Workspace Explorer.
CableWay/Conduit Path Features
Allows you to select all the features of a duct bank in the model.
Cables
Allows you to select cable runs in the model or in the Workspace Explorer.
Cableway Features
Allows you to select cableway features in the model.
Cableways
Allows you to select cableways in the model or in the Workspace Explorer.
Conduit Features
Allows you to select conduit features in the model.
Conduit Nozzles
Allows you to select conduit nozzles in the model.
Conduit Parts
Allows you to select conduit parts in the model or in the Workspace Explorer.
Conduit Runs
Allows you to select conduit runs in the model or in the Workspace Explorer.
Connections
Allows you to select connection objects when you join components together.
Control Points
Allows you to select control points in the model or in the Workspace Explorer.

Intergraph Smart® 3D Electrical User's Guide 53

 Electrical

Construction Graphics
Limits the selection of items to construction graphics.
Enclosed Runs
Selects the conduit and barrier runs in a duct bank or cable tray.
Enclosing Runs
Selects the duct bank or cable tray that encloses the conduit and barrier runs.
Equipment
Allows you to select equipment in the model or in the Workspace Explorer. Equipment can
be placed in the Electrical task or the Equipment and Furnishings task.
Parallel Cables
Allows you to select parallel cables, which are parents of paralleled cables.
All
Allows you to select any object, even objects created in another task.
More
Displays the Select Filter dialog box. The Select Filter dialog box displays all the simple
filters that are set up to accept object type or system objects as discrimination data. You can
then select additional filters to add them to this list. Only the selection of filters is available;
all other options are disabled.

Use the Inside Fence command to select all objects entirely inside the fence.

Use the Overlapping Fence command to select all objects entirely inside the fence and
those objects outside but touching the fence at some point.
For detailed information about defining properties for a specific object, see Appendix:
Property Dialog Boxes (on page 290).

Associating Features with a New Run

When you select multiple features and associate them with a new run by selecting <New
Cableway> or <New Conduit Run> from the Run list, the Create New Run dialog box is
populated with all the properties belonging to the run associated with the selected features. If
the existing run's properties do not match the defaults specified in the system, a dialog box
displays asking you whether you want to retrieve these properties from the System, the Run, or
None.

▪ If the initial set of features belongs to more than one run, the software checks if all the
selected features belong to the same system. If they do, a dialog box displays asking if you
want to retrieve the properties from the System or None.
▪ If the features belong to different systems, the software displays the following message:
Selected features do not have common default run properties. Please review the run
properties to ensure they meet requirements.
▪ If the selected features are not contiguous, the software displays the following message:

Intergraph Smart® 3D Electrical User's Guide 54

 Electrical

Features being assigned to target run are not contiguous. Do you want to proceed
with this operation?
▪ This functionality works the same if you select an individual feature.

What do you want to do?

▪ Edit cableway properties (on page 55)
▪ Edit cableway turn feature properties (on page 55)
▪ Edit cableway straight feature properties (on page 56)
▪ Edit cableway along-leg feature properties (on page 56)
▪ Edit cableway end feature properties (on page 56)
▪ Edit cableway transition feature properties (on page 56)
▪ Edit cable tray part properties (on page 56)
▪ Modify cableway feature cross section shape (on page 81)
▪ Modify multiple cableway cross section sizes (on page 81)
▪ Edit conduit run properties (on page 57)
▪ Edit conduit straight feature properties (on page 57)
▪ Edit conduit turn feature properties (on page 57)
▪ Edit conduit branch feature properties (on page 57)
▪ Edit conduit end feature properties (on page 58)
▪ Edit conduit part properties (on page 58)
▪ Edit component properties (on page 195)
▪ Edit cable properties (on page 231)
▪ Edit parallel cable properties (on page 231)
▪ Edit paralleled cable properties (on page 231)
▪ Edit cable marker properties (on page 251)

Edit cableway properties

1. Click Select .
2. Select Cableways in the Locate Filter box.
3. Select the cableway run to edit.
4. Click Properties on the ribbon.

Edit cableway turn feature properties

1. Click Select .
2. Select Cableway Features in the Locate Filter box.

Intergraph Smart® 3D Electrical User's Guide 55

 Electrical

3. Select the turn feature to edit.

4. Click Properties on the ribbon.

Edit cableway straight feature properties

1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the straight feature to edit.
4. Click Properties on the ribbon.

Edit cableway along-leg feature properties

1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the along-leg feature to edit.
4. Click Properties on the ribbon.

Edit cableway end feature properties

1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the end feature to edit.
4. Click Properties on the ribbon.

Edit cableway transition feature properties

1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the transition to edit.
4. Click Properties on the ribbon.

Edit cable tray part properties

1. Click Select .
2. Select Cable Tray Parts in the Locate Filter box.
3. Select the part that you want to edit.
4. Click Properties on the ribbon.

Intergraph Smart® 3D Electrical User's Guide 56

 Electrical

Edit conduit run properties

1. Click Select .
2. Select Conduit Runs in the Locate Filter box.
3. Select the conduit run to edit.
4. Click Properties on the ribbon.
5. Edit the properties as needed. See General Tab (Conduit Run Properties Dialog Box) (on
page 163) for more information about each property.

Edit conduit straight feature properties

1. Click Select .
2. Select Conduit Features in the Locate Filter box.
3. Select the straight feature to edit.
4. Click Properties on the ribbon.
5. Edit the properties as needed. See General Tab (Conduit Straight Feature Properties Dialog
Box) (on page 166) for more information about each property.

Edit conduit turn feature properties

1. Click Select .
2. Select Conduit Features in the Locate Filter box.
3. Select the turn feature to edit.
4. Click Properties on the ribbon.
5. Edit the properties as needed. See General Tab (Conduit Turn Feature Properties Dialog
Box) (on page 168) for more information about each property.

Edit conduit branch feature properties

1. Click Select .
2. Select Conduit Features in the Locate Filter box.
3. Select the branch feature to edit.
4. Click Properties on the ribbon.
5. Edit the properties as needed. See General Tab (Conduit Branch Feature Properties Dialog
Box) (on page 159) for more information about each property.

Intergraph Smart® 3D Electrical User's Guide 57

 Electrical

Edit conduit end feature properties

1. Click Select .
2. Select Conduit Features in the Locate Filter box.
3. Select the end feature to edit.
4. Click Properties on the ribbon.
5. Edit the properties as needed. See General Tab (Conduit End Feature Properties Dialog
Box) (on page 162) for more information about each property.

Edit conduit part properties

1. Click Select .
2. Select Conduit Parts in the Locate Filter box.
3. Select the conduit part to edit.
4. Click Properties on the ribbon.

Route Selection Commands

Route selection commands on the shortcut menu allow you to select part of a route network to
modify. These commands simplify the selection of a specific section of a network. For example,
if you want to modify a leg along with its supports, select the leg using On Same Leg, and then
add the hangers supporting the pipe leg using Get Connected Supports.
The route selection commands do not support combined features that belong
to different tasks. For example, you cannot combine Piping and HVAC features, or Electrical and
HVAC features.
Different route selection commands are available depending on the active Locate Filter.

Locate Filter Available Commands

All Get Cableways (on page 59)*

Get Conduit Runs (on page 59)*
* Only available on right-click shortcut menu in Workspace
Explorer.

Cable Tray Parts Get Features (on page 61)

Get Runs (on page 63)

Cableway/Conduit Path Features Get Connected Supports (on page 60)

Get Continuously Connected (on page 60)
Get Features (on page 61)
Get Runs (on page 63)

Intergraph Smart® 3D Electrical User's Guide 58

 Electrical

Locate Filter Available Commands

Cableway Features Get Connected Supports (on page 60)

Get Continuously Connected (on page 60)
Get Features (on page 61)
Get Runs (on page 63)

Cableways Get Features (on page 61)

Conduit Features Get Connected Supports (on page 60)

Get Continuously Connected (on page 60)
Get Features (on page 61)
Get Runs (on page 63)

Conduit Parts Get Features (on page 61)

Get Runs (on page 63)

Conduit Runs Get Features (on page 61)

Enclosed Runs Get Features (on page 61)

Enclosing Features Get Connected Supports (on page 60)

Get Continuously Connected (on page 60)
Get Features (on page 61)
Get Runs (on page 63)

Enclosing Runs Get Features (on page 61)

Get Cableways
Selects all the cableways associated with the selected electrical system in the Workspace
Explorer. The Locate Filter must be set to All and you must be in the Electrical task to use this
shortcut command.

Get Conduit Runs

Selects all the conduit runs associated with the selected electrical system in the Workspace
Explorer. The Locate Filter must be set to All and you must be in the Electrical task to use this
shortcut command.

Intergraph Smart® 3D Electrical User's Guide 59

 Electrical

Get Connected Supports

Selects all supports connected to the selected feature. This command does not support duct
banks and cable tray barriers. However, you can select a barrier in a cable tray, or a conduit in
duct bank.

Get Continuously Connected

Selects the feature and all features that are continuously connected to that feature.

Intergraph Smart® 3D Electrical User's Guide 60

 Electrical

Get Features
If you have the Locate Filter set to Cable Tray Parts or Conduit Parts, then Get Features
selects the parent feature of the selected part or parts.
If you have the Locate Filter set to Conduit Runs, Enclosed Runs, or Enclosing Runs, then
Get Features selects all the features in the selected run.
If you have the Locate Filter set to Cableway/Conduit Path Features, Cableway Features,
Conduit Features, or Enclosing Features, then Get Features contains a group of commands
that allow you to select part of a targeted route network. The Get Features commands apply to
features that are in the select set and are defined in the workspace. You can select one or more
features on the network.You can also use a combination of the following commands to extend
the targeted network as necessary.
On Same Run
Selects all features that belong to the same run even if the run is discontinued.

Intergraph Smart® 3D Electrical User's Guide 61

 Electrical

On Same Leg
Selects all features that belong to the same leg. The software also includes the along-leg
feature if the selected leg is a branch.
A leg is a group of route features routed in the same direction.

On All Connected Branches

Selects all features associated with the connected branches. Select an along-leg feature
that has a branch connected to it. Right-click the along-leg feature, and then select On All
Connected Branches. The software selects the associated features connected to the
branch run until it branches into a header run, or until a free end is traversed.

Intergraph Smart® 3D Electrical User's Guide 62

 Electrical

For Connected Fittings

Adds the immediate connected fittings to the selection. You must select a branch
component.

You can select a leg using On Same Leg, and then use For Connected Fittings to
add all the adjacent branch fittings on that leg to the selection.

Get Runs
Selects only the runs associated with the selected parts or features. The Locate Filter must be
set to Cableway/Conduit Path Features, Cableway Features, Conduit Features, Enclosing
Features, Cable Tray Parts, or Conduit Part to use this shortcut command.

Intergraph Smart® 3D Electrical User's Guide 63

SECTION 2

Electrical Workflow
Before you begin routing cableways, duct banks, cable trays, conduits, and cables, you must
define your reference data. Using the reference data workbooks, you can create custom parts
for electrical modeling. Your first step should be to review, edit, and customize the delivered
electrical reference data. For more information, see the Electrical Reference Data Guide
available from the Help > Printable Guides command in the software.
After customizing the reference data, define the necessary electrical systems that you want in
your model. You can create the systems in the Systems and Specifications task, or you can
right-click the System tab in the Workspace Explorer to create systems.
After the electrical reference data and the needed systems are defined, you can begin routing
cableways, cable trays, conduit, and duct banks in your model. You can divide a cable tray into
purchasable lengths using Insert Split . To add equipment and cabinets, use Place
Equipment within the Electrical task. You can then route conduit as needed. With the
cableway and conduit systems are in place, you can route the cable in your model.

Electrical Common Tasks

The following tasks are used frequently in the Electrical task.

Customize Reference Data

Create new electrical reference data by editing the CableTray.xls, Ductbank.xls,
CableWay.xls, Conduit.xls, and Cabling.xls, workbooks. For more information, see the
Electrical Reference Data Guide available from the Help > Printable Guides command in the
software.

Route Cableway, Duct Bank, and Cable Tray

To route cableways cable trays, or a duct banks in the model, see Create new cableway (on
page 76).
After routing cable tray, you can split it into purchasable lengths. For more information, see
Insert multiple cable tray splits (on page 257) and Insert a single cable tray split (on page 259).

Route Conduit
Route conduit from the cable trays. For more information, see Create new conduit (on page
141).

Place Equipment
Use the Place Equipment command in the Electrical task or in the Equipment and Furnishings
task to place equipment and cabinets in the model. For more information, see Place equipment
from the catalog (on page 206).

Intergraph Smart® 3D Electrical User's Guide 64

 Electrical Workflow

Create Cable
Place cables in the model. For more information, see Create a cable (on page 229).

Route Cables
Route the cables that are in the model. For more information, see Edit cable path manually (on
page 239).

Change Properties
To change properties for a selected object, like a feature or run, click the Properties button on
the horizontal ribbon bar. From there you can change the parent system, the run name, the
specifications, and the properties associated with the tray run.

Intergraph Smart® 3D Electrical User's Guide 65

SECTION 3

Route Cableway
Creates, models, and extends cableway, duct bank, and cable tray precisely. Cableway is a
logical object and does not have any physical parts, whereas cable tray and duct bank have
physical parts. A cableway is used to reserve space for cable tray and cable in the model. A
duct bank is a casing that encloses conduit runs. The enclosing run becomes a cableway,
whereas the enclosed conduit runs have physical parts. You can route multiple, parallel
cableway or cable trays at the same time. You can also place cable trays with barriers or
dividers.

By default, the software uses fast mode routing, which means that you do not see elbow or turn
graphics during the dynamic display. After you define the run location, the software displays the
elbows. Press SHIFT+F toggle fast mode on and off.

Route Cableway Ribbon

Sets options for routing a cableway. The ribbon displays different options based on the feature
shape, such as rectangular, flat oval, and round.
Properties
Displays the Cableway Settings dialog box. For more information, see Cableway Settings
Dialog Box (on page 98).

Start Route
Specifies the route starting location.

End Route
Specifies the route terminating location.
Plane
Sets the working plane for the route path. The icon in the ribbon changes depending on your
selection. The options include:

Intergraph Smart® 3D Electrical User's Guide 66

 Route Cableway

▪ Plan Plane
Defines the work surface as the XY plane at the depth of the active end. You also can
press CTRL+1 to select this option.

▪ Elevation Plane: East-West ( Z Plane: X-Axis)

Defines the work surface as the XZ plane. You also can press CTRL+2 to select this
option.
▪ Elevation Plane: North-South ( Z Plane: Y-Axis)
Defines the work surface as the YZ plane. You also can press CTRL+3 to select this
option.
▪ Plane by Turn/Branch
Defines the work surface as the plane defined by an existing turn or branch. You select
the turn or branch to set the plane. You also can press CTRL+4 to select this option.
▪ Plane by Three Points
Defines the work surface using three points that you define. You also can press
CTRL+5 to select this option.
▪ No Plane
Clears any work surfaces. The software does not project points that you place to any
plane. You also can press CTRL+6 to select this option.
Run
Displays the existing cableways in the model along with the <New Cableway>,
<New/Continue Run>, <Select Graphically>, <Load More Runs>, and More options.
Select the run to route.
<New Cableway> displays the New Cableway dialog box. Use this option to create a new
cableway run.
<New/Continue Run> extends an existing cableway if you select the end feature of that
cableway. If a run is continued, all runs associated with the system parent of the continued
run display in the list. If you do not select an end feature, the New Cableway dialog box is
displayed to create a cableway. For more information, see New Cableway Dialog Box (on
page 103).
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different system parent. For more information, see Select Cableway
Dialog Box (on page 112).
Shape
Sets the offset cross section shape. If you change the cross-section shape while routing, the
software automatically converts the size, based on an equal area method. Formulas include:
- Area of a circular shape. In this equation, r represents the radius of the circle.
- Area of a rectangular shape. In this equation, a represents the rectangle width,

Intergraph Smart® 3D Electrical User's Guide 67

 Route Cableway

and b represents the rectangle depth.

- Area of a flat oval shape. In this equation, a represents the major
dimension, and b represents the minor dimension.
Diameter
Sets the diameter of the cross section.
Width
Sets the width of the cross section. The list of options is determined by the values available
in the reference data. The list displays only the values that are valid for the current depth. If
the depth is not defined, or the Depth box is empty, the width size is based on the default
width ratio. This option is available only if you have selected Rectangle or Flat Oval in the
Shape box.
Depth
Sets the depth of the cross section. The list of options is determined by the values available
in the reference data. The list displays only the values that are valid for the current width. If
the width is not defined, or the Width box is empty, the depth size is based on the default
width ratio. This option is available only if you have selected Rectangle or Flat Oval in the
Shape box.
Orientation
Determines the orientation of the cross section. You can orient the cross section in a
standard or skewed position, and you can specify the location of a cross section in the
cableway. Orientation changes the local axis (U or V) of the cableway associated with the
width axis of the offset cross section.
You cannot access the orientation if an end feature or nozzle is selected
to position the offset. This action fixes the orientation of both ends of the transition.

Angle Lock
Locks or unlocks the Angle box.
Angle
Enter or select an angle for the current route segment. You can enter any value needed,
provided it does not conflict with the defined specifications. If the Angle Lock is unlocked,
this box dynamically displays the bend angle of the cableway as you route.

Length Lock
Locks or unlocks the Length box.
Length
Enter or select a length for the current route segment.
Offset
Displays an offset of the part surface from the working plane.

Lock Slope
Locks or unlocks the Slope box. This option is only available for duct banks.

Intergraph Smart® 3D Electrical User's Guide 68

 Route Cableway

Slope
Displays the current slope for the duct bank run. This option is only available for duct banks.
Select Not Sloped to route with no slope. If you unlock the slope box, then the slope value
is matched to the slope of the duct run being routed.
You can change the units of measure for the slope using Tools > Options > Units
of Measure.

Edit Cableway Along Leg Feature Ribbon

Displays options for editing a cableway along leg feature.
Properties
Displays the Cableway Along Leg Feature Properties dialog box. For more information,
see Cableway Along Leg Feature Properties Dialog Box (on page 113).
Move From
Click to specify the starting location of the move vector. If you do not define a starting point,
the software assumes that the current location of the object is the starting point.
Move To
Click to specify the ending location of the move vector.
Run
Specifies the name of the cableway run. You can select a different run from the list.
<New Cableway> displays the New Cableway dialog box. Use this option to create a new
cableway run.
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different electrical system. For more information, see Select Cableway
Dialog Box (on page 112).
Part
Displays the part description.
Direction
This option is not available for this release.
Angle 1
Specifies the branch angle of the along leg feature. We recommend that you do not edit this
angle if the along leg feature ends with a free leg.
Angle 2
Specifies the branch angle of the feature located at the other end of the branch. This box is
blank if the branch is a free leg.

Intergraph Smart® 3D Electrical User's Guide 69

 Route Cableway

Edit Cableway End Feature Ribbon

Displays options for editing a cableway end feature.
Properties
Displays the Cableway End Feature Properties dialog box. For more information, see
Cableway End Feature Properties Dialog Box (on page 115).
Move From
Click to specify the starting location of the move vector. If you do not define a starting point,
the software assumes that the current location of the object is the starting point.
Move To
Click to specify the ending location of the move vector.
When you move, or modify a route object in HVAC, Electrical, or Piping, Smart 3D
treats any unfinished ends as free end features. An unfinished end is an end with mating parts
or a logical data connection with one logical port. You can reconnect using these free end
features. This behavior allows you to reuse existing mating parts and connections and reduces
wait times.
Plane
Sets a working plane for the route path. Six options are available:
▪ Plan Plane
Defines the work surface as the XY plane at the depth of the active end. You also can
press CTRL+1 to select this option.

▪ Elevation Plane: East-West ( Z Plane: X-Axis)

Defines the work surface as the XZ plane. You also can press CTRL+2 to select this
option.
▪ Elevation Plane: North-South ( Z Plane: Y-Axis)
Defines the work surface as the YZ plane. You also can press CTRL+3 to select this
option.
▪ Plane by Turn/Branch
Defines the work surface as the plane defined by an existing turn or branch. You select
the turn or branch to set the plane. You also can press CTRL+4 to select this option.
▪ Plane by Three Points
Defines the work surface using three points that you define. You also can press
CTRL+5 to select this option.
▪ No Plane
Clears any work surfaces. The software does not project points that you place to any
plane. You also can press CTRL+6 to select this option.
Run
Displays the name of the cableway associated with the end feature.

Intergraph Smart® 3D Electrical User's Guide 70

 Route Cableway

Part
Allows you to specify the part associated with the end feature.

Angle Lock
Locks or unlocks the Angle box.
Leg Angle
Displays the angle of any turn or branch component that is located at the other end of the
leg with which the selected end feature is associated. This box is disabled if no turn or
branch exists at the other end of the leg. Changing the angle value adjusts the position of
the selected end feature to achieve the specified angle and then locks that angle value.
Unlock to dynamically update the angle as you move the selected end component.

Length Lock
Locks or unlocks the Length box.
Length
Displays the length of the cableway connected to the end being edited. Entering a value in
this box adjusts the position of the selected end feature to achieve the specified length and
then locks that length value. Unlock to dynamically update the length value as you move the
selected end component.
Offset
Controls the SmartSketch® offset constraint. Type a distance that you want to offset the
cableway. Select <Disabled> if you do not want to use the offset. Select Set Offset
Reference to define a reference point. For more information on setting the reference point,
see Set Offset Reference Dialog Box (Cableway) (on page 86).

Edit Cableway Straight Feature Ribbon

Displays options for editing a cableway straight feature.
Properties
Displays the Cableway Straight Feature Properties dialog box. For more information, see
Cableway Straight Feature Properties Dialog Box (on page 120).
Move From
Click to specify the starting location of the move vector. If you do not define a starting point,
the software assumes that the current location of the object is the starting point.
Move To
Click to specify the ending location of the move vector.
Plane
Activates options for selecting a working plane for the route path. Six options are available:
▪ Plan Plane
Defines the work surface as the XY plane at the depth of the active end. You also can
press CTRL+1 to select this option.

▪ Elevation Plane: East-West ( Z Plane: X-Axis)

Intergraph Smart® 3D Electrical User's Guide 71

 Route Cableway

Defines the work surface as the XZ plane. You also can press CTRL+2 to select this
option.
▪ Elevation Plane: North-South ( Z Plane: Y-Axis)
Defines the work surface as the YZ plane. You also can press CTRL+3 to select this
option.
▪ Plane by Turn/Branch
Defines the work surface as the plane defined by an existing turn or branch. You select
the turn or branch to set the plane. You also can press CTRL+4 to select this option.
▪ Plane by Three Points
Defines the work surface using three points that you define. You also can press
CTRL+5 to select this option.
▪ No Plane
Clears any work surfaces. The software does not project points that you place to any
plane. You also can press CTRL+6 to select this option.
Run
Displays the name of the cableway. You can select another cableway if necessary.
<New Cableway> displays the New Cableway dialog box. Use this option to create a new
cableway run.
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different electrical system. For more information, see Select Cableway
Dialog Box (on page 112).
Shape
Sets the offset cross-section shape. This option displays the current value if an end feature
is selected to position the offset because this fixes the cross section shape and the size of
the offset cross section.
Diameter
Sets the diameter of the cross section. This option is available only if you have selected
Round in the Shape box.
Width
Sets the width dimension of the cross section. Values stored in the reference data determine
the list of options. The list displays only the values that are valid for the current depth. If the
depth is not defined, or the Depth box is empty, the width size is based on the default width
ratio. This option is available only if you have selected Rectangle or Flat Oval in the Shape
box.
Depth
Sets the depth of the cross section. The list of options is determined by the values available
in the reference data. The list displays only the values that are valid for the current width. If

Intergraph Smart® 3D Electrical User's Guide 72

 Route Cableway

the width is not defined, or the Width box is empty, the depth is set based on the default
width ratio. This option is available only if you have selected Rectangle or Flat Oval in the
Shape box.
Orientation
Determines the orientation of the cross section.
Lock Length
Locks or unlocks the Length box.
You can use the Lock Length button when moving features. When leg length is locked
during the move of a straight feature, the software automatically modifies the turn points,
along with the length and angle of adjacent straight features, to remain connected to the
moved leg.
When leg length is not locked during the move of a straight feature, the software extends or
shortens the associated legs to connect with the new position of the moved leg.
Offset
Controls the SmartSketch® offset constraint. Type a distance that you want to offset the
cableway. Select <Disabled> if you do not want to use the offset. Select Set Offset
Reference to define the reference point. For more information on setting the reference
point, see Set Offset Reference Dialog Box (Cableway) (on page 86).
Max Fill
Displays the percent maximum fill of the cableway straight feature. This button is enabled
only if the cable tray contains a cable. Click Max Fill to highlight the straight feature with the
displayed maximum cable fill value in the model.

Edit Cableway Turn Feature Ribbon

Displays options for editing a cableway turn feature.
Properties
Displays the Cableway Turn Feature Properties dialog box. For more information, see
Cableway Turn Feature Properties Dialog Box (on page 125).
Move From
Click to specify the starting location of the move vector. If you do not define a starting point,
the software assumes that the current location of the object is the starting point.
Move To
Click to specify the ending location of the move vector.
Plane
Activates options for selecting a working plane for the route path. Six options are available:
▪ Plan Plane
Defines the work surface as the XY plane at the depth of the active end. You also can
press CTRL+1 to select this option.

▪ Elevation Plane: East-West ( Z Plane: X-Axis)

Defines the work surface as the XZ plane. You also can press CTRL+2 to select this

Intergraph Smart® 3D Electrical User's Guide 73

 Route Cableway

option.
▪ Elevation Plane: North-South ( Z Plane: Y-Axis)
Defines the work surface as the YZ plane. You also can press CTRL+3 to select this
option.
▪ Plane by Turn/Branch
Defines the work surface as the plane defined by an existing turn or branch. You select
the turn or branch to set the plane. You also can press CTRL+4 to select this option.
▪ Plane by Three Points
Defines the work surface using three points that you define. You also can press
CTRL+5 to select this option.
▪ No Plane
Clears any work surfaces. The software does not project points that you place to any
plane. You also can press CTRL+6 to select this option.
Run
Displays the name of the cableway. You can select another cableway if necessary.
<New Cableway> displays the New Cableway dialog box. Use this option to create a new
cableway run.
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different electrical system. For more information, see Select Cableway
Dialog Box (on page 112).
Type
Specifies the short code associated with the selected turn. You can replace the existing turn
feature with the available turn types displayed on the list. This list displays applicable turn
types based on the nominal diameter of the selected object.
Miters
Specifies the number of miters for the turn feature. This option is available only if you select
the Miter turn type from the Type list.

Angle Lock
Locks or unlocks the angle. Locking the corresponding angle value creates a constraint
along which the selected turn angle can be moved.
Angle 2
Specifies the angle of the turn feature located at the end of one associated leg. This option
is disabled if there is no turn feature located at the end of the leg. Although this value can be
changed, the location of the corresponding turn cannot. Modification of this value repositions
the selected turn until the specified angle is achieved.

Intergraph Smart® 3D Electrical User's Guide 74

 Route Cableway

Angle 1
Specifies the angle of the turn that you are editing. Modification of this value repositions the
selected turn until the specified angle is achieved.
Angle 3
Specifies the angle of the turn feature located at the end of one associated leg. This option
is disabled if there is no turn feature located at the end of the leg. Although this value can be
changed, the location of the corresponding turn cannot. Modification of this value repositions
the selected turn until the specified angle is achieved.
Offset
Controls the SmartSketch offset constraint. Type a distance that you want to offset the
cableway. Select <Disabled> if you do not want to use the offset. Select Set Offset
Reference to define a reference point. For more information on setting the reference point,
see Set Offset Reference Dialog Box (Cableway) (on page 86).

Routing Cableways and Cable Trays

A cableway reserves space in the model and does not contain physical parts. Cable trays do
contain physical parts. You can also route multiple, parallel cableway or cable trays at the same
time. Cable trays can be placed with or without barriers or dividers.
To route using an existing run, we recommend that you first select the
appropriate cableway from the Run box. By adapting this practice, you can avoid:
▪ unnecessary activation of the New Cableway dialog box.
▪ creating empty runs or redundant runs.
▪ re-work required to delete the empty or redundant runs.

What do you want to do?

▪ Create new cableway (on page 76)
▪ Route using an existing cableway (on page 76)
▪ Route stacked cableways (on page 88)
▪ Route side-by-side cableways (on page 89)
▪ Place components while routing cableway (on page 77)
▪ Route cableway with an offset (on page 78)
▪ Branch cableway from a turn feature (on page 79)
▪ Move a cableway branch (on page 34)
▪ Move a transition (on page 37)
▪ Flip a routed cableway tee (on page 82)
▪ Define cable tray barriers (on page 84)

Intergraph Smart® 3D Electrical User's Guide 75

 Route Cableway

Create new cableway

1. Click Route Cableway .
2. Select a starting point in the graphic view for the new cableway.
If you select a feature located at the end of an existing run, the software continues
the run of the selected feature. Skip to step 5.
3. On the New Cableway Dialog Box (on page 103), specify the necessary properties for the
cableway.
Define settings for cableway (on page 84)
4. Click OK to close the dialog box.
5. Select points to define the route of your cableway.

▪ You can use PinPoint, Point Along, and the SmartSketch3D relationship indicators
when defining your cableway.
▪ Using the Angle and Length constraints, you can lock these parameters while routing a
cableway.
6. Right-click to end routing cableway.

If you select an end feature before starting Route Cableway, that feature is the
default starting point for the new cableway.

Route using an existing cableway

1. Click Route Cableway .
2. Select an existing cableway from the Run box, on the ribbon.
If you select a feature located at the end of an existing run, the software continues
the run of the selected feature. Skip to step 3.
3. Select points to define the route of the cableway.

▪ You can use PinPoint, Point Along, and the SmartSketch3D relationship indicators
when defining your cableway.
▪ Using the Angle and Length constraints, you can lock these parameters while routing a
cableway.

Intergraph Smart® 3D Electrical User's Guide 76

 Route Cableway

4. Select the ending point of the cableway.

5. Continue routing or right-click to end routing the cableway.

Place components while routing cableway

1. Click Route Cableway .
2. Select the run starting point.
If you select a feature located at the end of an existing run, the software continues
the run of the selected feature. Skip to step 5.
3. On the New Cableway Dialog Box (on page 103), specify necessary properties for the
conduit.
Define settings for cableway (on page 84)
4. Click OK to close the dialog box.
5. Select points to begin routing your cableway.

6. Click Insert Component .

7. On the ribbon, select a component type from Part box.

8. Click Finish.

9. Continue routing the cableway.

You can continue routing an existing run by selecting a run end feature or by
selecting the run name from the list of available runs.

Intergraph Smart® 3D Electrical User's Guide 77

 Route Cableway

Route cableway with an offset

1. Click Route Cableway .
2. Select the run starting point.
3. Define the cableway properties on the New Cableway Dialog Box (on page 103), and then
click OK.
4. From the Offset option, select Set Offset Reference.
The software displays the Set Offset Reference dialog box.
5. Select External for the offset type.
6. Select a reference from which you want to measure the offset.
7. Key in the offset distance in the Offset box.
8. Route the cableway as needed.

Copy a cableway run

1. Click Select .
2. Select Cableways in the Locate Filter box.
3. Select the cableway run to copy.
4. Click Edit > Copy.
5. Select a reference point by clicking a point on the selected cableway.
6. Click Edit > Paste.
7. Select necessary options in the Paste dialog box.
Select the Paste in place option to copy the clipboard contents on top of the
existing copied objects.
8. If you selected the Paste in place option, select Move from the main ribbon.
9. Identify a location in the model for the cableway run, and click in the graphic view to move
the run to a new location.
If you position an end of the copied cableway run so that it touches a cableway run
end or nozzle, the software automatically connects the two.

Intergraph Smart® 3D Electrical User's Guide 78

 Route Cableway

Branch cableway from a turn feature

1. Click Route Cableway .
2. Select a cableway or cable tray turn feature in the model.
From the point that you click on the turn feature, the software finds the closest
point on the centerline. This point is the branch point.
3. On the New Cableway Dialog Box (on page 103), select Cws-0 in the Specification box.
4. Specify the other properties as needed.
5. Click OK, and route the cableway.

▪ Because zero-spec cableway is being routed, the software does not create any parts for the
new cableway or its connection to the existing cableway or cable tray.
▪ The branch angle is determined by translating the centerline of the connected leg closest to
the branch point. The picture below shows the branch point (A), a reference line (B), the
centerline (C) of the connected leg, and the resulting branch angle (D).

Intergraph Smart® 3D Electrical User's Guide 79

 Route Cableway

Branch cableway from a conduit end feature

1. Click Route Cableway .
2. Select the end feature of a conduit.
From the point that you click on the end feature, the software finds the closest point
on the centerline. This point is the branch point.
3. On the New Cableway Dialog Box (on page 103), select Cws-0 in the Specification box.
4. Specify the other properties as needed, and then click OK.
5. Continue routing the cableway.
The software does not create any parts for the zero-spec cableway. The software
only supports the branching of a cableway specification run from conduit end features. If you try
to branch from conduit features other than conduit end features, the software treats it as routing
from free space and does not create any branch features.

Extend existing cableway

1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the end that you want to move.
Make sure that you select the end feature.

4. Click Move To on the ribbon. If you do not define a starting point by using Move From
, the software assumes that the current location of the object is the starting point.
5. Move the cableway end to the new location. You can use the Length box to type a new
length for the cableway.
The software extends the end to the specified length.

Intergraph Smart® 3D Electrical User's Guide 80

 Route Cableway

Flip a cableway part while routing

1. Click Insert Component .
2. Select a straight feature, end feature, nozzle, or component port to designate the insertion
point of the component.
3. In the Part box, click one of the parts listed, or click More.
4. Select a part from the catalog, and then click OK.
The software places an outline of the selected part.
5. On the ribbon bar, click the arrow adjacent to Flip , and then select a port from the list.
The selected port is the new insertion point, and the part flips corresponding to the selected
port.
6. Click Finish.
7. Continue routing the cableway.
You can continue routing an existing run by selecting a run end feature or by
selecting the run name from the list of available runs.

Modify multiple cableway cross section sizes

1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the features that you want to edit.
4. Click Properties on the ribbon.
5. On the Properties dialog box, click the Cross Section tab.
If the dialog box does not have a Cross Section tab, you cannot edit the cross-
section for that type of feature.
6. Edit the width, depth, and orientation angle values to meet your requirements. You can also
change the cross-section shape.

▪ Cross-section shapes include Rectangle, Round, and Flat Oval.

▪ Manually placed components will not update with the system generated features. You
must replace these components manually.

7. To end the modification, right-click in the graphic view or click Select .

Modify cableway feature cross section shape

1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the feature that you want to edit.

Intergraph Smart® 3D Electrical User's Guide 81

 Route Cableway

4. Click Properties on the ribbon.

5. On the Properties dialog box, click the Cross Section tab.
If the dialog box does not have a Cross Section tab, you cannot edit the cross-
section for that type of feature.
6. Select an available shape from the Cross Section list.
When you change a cross-section shape, the software immediately updates the
database.
7. If needed, edit the dimensions.

8. To end the modification, right-click in a graphic view or click Select .

Flip a routed cableway tee

1. Click Select .
2. Select Cableway Features in the Locate Filter box.
3. Select the cableway features connected to the tee, excluding the first feature.

4. On the ribbon bar, click Move .

Intergraph Smart® 3D Electrical User's Guide 82

 Route Cableway

5. Select a cableway feature.

6. Move the features to a new location in the opposite direction.

The cableway tee and the connected parts flip accordingly.

Intergraph Smart® 3D Electrical User's Guide 83

 Route Cableway

Choose a working plane

1. On the ribbon, click Plane and select your working surface.
Plane Ribbon Options
▪ Plan Plane - Defines the work surface as the XY plane at the depth of the active
end. You also can press CTRL+1 to select this option.

▪ Elevation Plane: East-West - Defines the work surface as the XZ plane. You also
can press CTRL+2 to select this option.
▪ Elevation Plane: North-South - Defines the work surface as the YZ plane. You also
can press CTRL+3 to select this option.
▪ Plane by Turn/Branch - Defines the work surface as the plane defined by an
existing turn or branch. You select the turn or branch to set the plane. You also can
press CTRL+4 to select this option.
▪ Plane by Three Points - Defines the work surface using three points that you define.
You also can press CTRL+5 to select this option.
▪ No Plane - Clears any work surfaces. The software does not project points that you
place to any plane. You also can press CTRL+6 to select this option.

Define settings for cableway

1. On the General tab of the New Cableway dialog box, choose the system for the cableway
in the System box.
The System box lists up to the last ten selected systems. Select More to browse all
systems in the workspace and database.
2. In the Cableway box, type the name of the new cableway that you are creating. If you do
not enter a name, the software generates a name using the default naming rule.
You can choose a naming rule in the Name Rule box, if necessary.
3. Set the specification of the new cableway in the Specification box.
Use the Category option to view more properties that you can set for the cableway.

Define cable tray barriers

You need to bulkload the Cable Tray Barrier Parts workbook delivered to
[Product Folder]\CatalogData\BulkLoad\SampleDataFiles. You can also modify a relevant
workbook to support barriers.

1. Click Route Cableway .

2. Click in the model to select a starting location for the cableway.
The software displays the New Cableway Dialog Box (on page 103).
3. On the General tab, specify all the required properties.
You must select a specification that supports barriers.
4. Type a number in the Number of Barriers box. The default value is 0.

Intergraph Smart® 3D Electrical User's Guide 84

 Route Cableway

The software adds a new tab to the dialog box called Barriers.
5. On the Barriers tab, select the <CableWay Properties>, and make your changes.
6. Repeat for each of the <CableWay Properties> that needs modifying.
7. Click OK.
The software adds a barrier by dividing the right-most partition into equal parts.

If you want all partitions to be equal, click Go to Defaults .

See Also
Modify cable tray barriers (on page 85)

Delete a cable tray with barriers

1. Click Select .
2. Select Enclosing Runs in the Locate Filter box.
3. Select the cable tray run to delete.
4. Click Delete .
The software deletes the cable tray including the barriers. If the cable tray carries cables,
the Route status of the cables is set to incomplete.

Modify cable tray barriers

1. Click Select .
2. Select Enclosing Runs in the Locate Filter box.
3. Select the cable tray to modify.

4. On the Barriers tab, click Add Barrier to add another barrier.

5. Click OK to confirm the modification.
The software adds a barrier by dividing the right-most partition into equal parts.

▪ If you want all partitions to be equal, click Go to Defaults .

▪ To delete a partition, click Delete .

Select cableway cross section properties

1. Click Properties while you are routing cableway.
2. On the Cableway Settings dialog box (on page 98), click the Cross Section tab.
3. On the Cross Section tab, select the shape of cross section from the list. You can select
from rectangular, round, and flat oval.
4. If necessary, specify the dimensions of the new cross-section.
You can also specify cross-section properties in the Shape box on the ribbon.

Intergraph Smart® 3D Electrical User's Guide 85

 Route Cableway

Set Offset Reference Dialog Box (Cableway)

Sets options for reference offsets while routing cableway.
Offset Reference Type
Specifies the offset type for the cableway.
▪ External - Routes a cableway at a specified distance from another object, such as
another cableway running parallel to the one you are placing.
▪ Cardinal Point - Routes a cableway by the top, sides, bottom, or invert elevation of the
cableway instead of the cableway centerline. You must use Tools > PinPoint and lock
the plane when using this reference type. For example, if you are routing the cableway
by the invert elevation cardinal point, you must lock the elevation plane at the invert
elevation you want to use.
If the referenced object is a planar surface (such as a slab or deck), then the offset distance
is measured from the surface to the selected reference plane (for example, the Elevation
Plane: East-West (Z Plane: X-axis ).
If the referenced object is a linear element (such as a structural beam), then the offset
distance is measured from the line to the selected reference plane on which the cableway is
being routed.

Offset
Controls the SmartSketch3D offset constraint. Type the distance that you want to offset. You
can turn off the offset option by selecting <Disabled>.
Measured From
Specifies the object from which you want to measure the offset. You can select:
▪ Centerline - Select this option if you want to measure the offset from the centerline of a
cableway.

Intergraph Smart® 3D Electrical User's Guide 86

 Route Cableway

▪ Surface by width - Select this option if you want to measure the offset from the width
dimension of the cableway.
▪ Surface by depth - Select this option if you want to measure from the depth dimension
of the cableway.
See Also
Create New Cableway (on page 76)
Route Cableway with an Offset (on page 78)
Route stacked cableways (on page 88)

Route Multiple, Parallel Cableway Runs

You can route multiple, parallel cableway or cable tray runs in either Along Depth (stacked) or
Along Width (side-by-side) mode.

To route multiple, parallel cableway runs, use Route Cableway and set options as needed
on the Multi-Route Tab (New Cableway Dialog Box) (on page 107). The software creates a
master run and several slave runs. When you route the master run, the slave runs follow along.
You can specify the number of slave runs above and below or to the left and right of the master
run.
After the cableways are routed in the model, they are individual cableway runs without
relationships to each other. For example, you can change a property on the master run and it
does not affect any of the slave runs.
The Multi-Route tab is not available when a Duct Bank specification has been
selected on the General tab.

What do you want to do?

▪ Route stacked cableways (on page 88)
▪ Route side-by-side cableways (on page 89)

Intergraph Smart® 3D Electrical User's Guide 87

 Route Cableway

Route stacked cableways

1. Click Route Cableway .
2. Select a starting point in the graphic view for the new cableways.
The software displays the New Cableway Dialog Box (on page 103).
3. On the General tab, specify the settings for the cableway.
Define settings for cableway (on page 84)
4. Select the Multi-Route tab to specify the settings for multi-routing.
5. Select Along Depth in the Mode box to create stacked cableways.
6. In the Cableways Above Master Run box, enter the number of cableways that you want
above the master cableway.
7. In the Cableways Below Master Run box, enter the number of cableways that you want
below the master cableway.
8. In the Vertical Distance Between Trays box, enter the distance between the cableway
runs.
9. Click OK to close the dialog box.
10. Click in a graphic view define the route of your cableway.
As you click, the software places the master cableway, and the slave runs follow along.

▪ You can use PinPoint , Point Along , and the SmartSketch3D relationship
indicators when defining your cableways.
▪ Using the Angle and Length constraints, you can lock these parameters while routing a
cableway.

Intergraph Smart® 3D Electrical User's Guide 88

 Route Cableway

11. Right-click to end routing of the cableways.

Route side-by-side cableways

1. Click Route Cableway .
2. Select a starting point in the graphic view for the new cableways.
The software displays the New Cableway Dialog Box (on page 103).
3. On the General tab, specify the settings for the cableway.
Define settings for cableway (on page 84)
4. Click the Multi-Route tab to specify the settings for multi-routing.
5. Select Along Width in the Mode box to create side-by-side cableways.
6. In the Cableways to Left of Master Run box, enter the number of cableways that you want
to the left of the master cableway.
7. In the Cableways to Right of Master Run box, enter the number of cableways that you
want to the right of the master cableway.
8. In the Horizontal Distance Between Trays box, enter the distance between the cableway
runs.
9. Click OK to close the dialog box.
10. Click in a graphic view to define the route of your cableway.
As you click, the software places the master cableway, and the slave runs follow along.

▪ You can use PinPoint , Point Along , and the SmartSketch3D relationship
indicators when defining your cableways.
▪ Using the Angle and Length constraints, you can lock these parameters while routing a
cableway.

Intergraph Smart® 3D Electrical User's Guide 89

 Route Cableway

11. Right-click to end routing of the cableways.

Intergraph Smart® 3D Electrical User's Guide 90

SECTION 4

Routing Duct Banks

A duct bank is a casing that encloses conduit runs. The enclosing run becomes a cableway
which does not have parts. However, conduits parts are available for the enclosed conduits.
Duct banks can be logically connected with other duct banks of similar cross-section. They can
also logically connect with zero-spec cableway runs. Duct banks do not form transitions. The
connecting cableways always form the transition. You can route cables out of networks
containing duct banks or cableways. You cannot multi-route duct banks.

By default, the software uses fast mode during routing, which means that you do not see elbows
or turns during the dynamic placement display. After you define the run location, the software
displays the elbows. Press SHIFT+F to toggle fast mode on and off.
To route using an existing run, we recommend that you first select the
appropriate duct from the Run box. By adapting this practice, you can avoid:
▪ unnecessary activation of the New Cableway dialog box.
▪ creating empty runs or redundant runs.
▪ re-work required to delete the empty or redundant runs.

What do you want to do?

▪ Route duct bank (on page 92)
▪ Route a sloped duct bank (on page 93)
▪ Copy a duct bank (on page 95)
▪ Branch duct banks (on page 94)
▪ Move duct bank (on page 45)
▪ Delete conduit from duct bank (on page 51)
▪ Change duct bank turn angle (on page 95)
▪ Extend or shorten duct bank (on page 95)
▪ Delete a duct bank (on page 51)

Intergraph Smart® 3D Electrical User's Guide 91

 Route Cableway

Route duct bank

1. Click Route Cableway .
2. Click in the graphic view to select a starting point for the duct bank.
3. On the New Cableway dialog box, select a Duct Bank Specification such as the delivered
DBS-0. For more information, see New Cableway Dialog Box (on page 103).
The software displays a new Duct Bank tab in the dialog box.

4. On the Duct Bank tab, set the Duct Bank properties.

5. Click OK to close the dialog box.
6. Click in the graphic view to define the route of your duct bank.
You can use PinPoint, Point Along, and the SmartSketch3D relationship indicators
when defining your duct bank.

7. Right-click to end routing of the duct bank.

Intergraph Smart® 3D Electrical User's Guide 92

 Route Cableway

Route a sloped duct bank

1. Click Route Cableway .
2. Click to select a starting point in the graphic view to route a new duct bank.
3. On the New Cableway dialog box, select a system.
4. In the Specification box, select a duct bank specification such as the delivered DBS-0.
When you select a duct bank specification, the Slope property is available.
5. Specify slope for the duct bank.
6. On the Duct Bank tab, set the duct bank properties as needed.
7. Click OK.
Specify Slope Direction dialog box displays.
8. In the Specify Slope Direction dialog box, specify if you are routing from the high point or
the low point of the duct bank. For more information, see Specify Slope Direction Dialog Box
(Duct Bank) (on page 96).
9. Click in a graphic view to route the duct bank as needed.
10. Right-click to end routing.

▪ You can use PinPoint , Point Along , and the SmartSketch3D relationship
indicators when routing the duct bank.
▪ You can unlock the slope on the ribbon bar to temporarily override the slope. For example,
to model a vertical top in the duct bank you need to unlock the slope.

Modify a duct bank

1. Click Select .
2. Select Enclosing Runs in the Locate Filter box.
3. Select the duct bank to modify.
4. On the ribbon bar, click Properties .

5. On the Duct Bank tab, click Add Conduit Run to add another conduit.
The software adds a conduit run named AddedRun<N> to the duct bank at 0x0 position.
You can see the preview of the conduit run and its position.

6. To change the position of the new conduit run, modify the Distance Along Width Direction
and Distance Along Depth Direction as required.

Intergraph Smart® 3D Electrical User's Guide 93

 Route Cableway

If the new position is outside the cross section, click Resize to adjust the cross
section.
7. Click OK to confirm the changes and close the dialog box.

▪ To revert the changes, click Go To Defaults , or click Cancel.

▪ To delete a conduit, click Delete .

Branch duct banks

1. Click Select .
2. Select CableWay/Conduit Path Features in the Locate Filter box.
3. From an existing duct bank, select the conduit end features that you want to branch and the
enclosing duct bank end-feature.
We recommend that you fence select and then remove the conduits that are not
needed. To remove the extra conduits, hold down CTRL and then select the conduit end
features.

4. Click Route Cableway .

5. In the New Cableway Dialog Box (on page 103), make any changes to the conduits you are
branching, and then click OK.
6. Continue to route the branch duct bank to the direction and length required.

When you branch away from the main duct bank, you can select one or more
conduits. To successfully branch the duct bank, be sure to select only the end features of the
objects that you want to extend.

Intergraph Smart® 3D Electrical User's Guide 94

 Route Cableway

Copy a duct bank

1. Click Select .
2. Select Enclosing Runs in the Locate Filter box.
3. Select the duct bank to copy.
4. On the Common ribbon bar, click Copy .
5. Select a reference point.
6. On the Common ribbon bar, click Paste .
7. Select Move from the main ribbon.
8. Identify a location in the model for the duplicated duct bank.
The software copies the duplicate duct run to the specified location.

Change duct bank turn angle

1. Click Select .
2. Select CableWay/Conduit Path Features in the Locate Filter box.
3. Select all the conduit end-features and the enclosing duct bank end-feature to move.
4. Click Move on the toolbar.
5. Click on the highlighted run.
6. Identify the point in the model and click in the graphic view.
To change the angles of the turns, either select all the conduits or select only the
conduits to change. Then move the conduits using Move to achieve the new angle.

Extend or shorten duct bank

1. Click Select .
2. Select Enclosing Runs in the Locate Filter box.
3. Click Move on the main ribbon.
4. Click a location on the duct bank to use as the move-from location.
5. Identify the move-to location by clicking in the model.

▪ Be sure to select only the end features.

▪ You can also extend or shorten the duct bank by modifying the length of Enclosing
Cableway End Feature.

Intergraph Smart® 3D Electrical User's Guide 95

 Route Cableway

Specify Slope Direction Dialog Box (Duct Bank)

Defines the slope direction of a new duct bank.

High Point
Select to indicate that the duct bank end point is the highest point on the duct bank.
Low Point
Select to indicate that the duct bank end point is the lowest point on the duct bank.
See Also
Route a sloped duct bank (on page 93)

Select Insulation Material Dialog Box

Specifies the insulation materials for a selected object. By browsing through the part hierarchy,
you can find and select an insulation material in the Catalog database.

Save
This option is unavailable.

Cut
This option is unavailable.
Copy
This option is unavailable.
Paste
This option is unavailable.
Delete
This option is unavailable.

Intergraph Smart® 3D Electrical User's Guide 96

 Route Cableway

Undo
This option is unavailable.

Insert Row
This option is unavailable.

Move Up
This option is unavailable.
Move Down
This option is unavailable.
Properties
Displays the properties of the selected object. Because you cannot modify any properties
until the object is placed, all properties on the Properties dialog box are read-only.
Preview
Displays a bitmap symbol of the selected object. The image file must be assigned to the
object in the catalog reference data.
Filter
This option is unavailable.
Sort
This option is unavailable.
Customize Current View
This option is unavailable.
List View
Sets the dialog box to display insulation thickness values in a list view.

Grid View
Sets the dialog box to display insulation thickness values in a spreadsheet-style grid view.
Back
Returns you to the previously selected insulation material folder. Use this command to
navigate through the hierarchy to the specific insulation material you need.
Forward
Sends you to the last selected insulation material folder that you moved away from by using
the Back button. Use this command to navigate through the hierarchy to the specific
insulation material you need.
Up One Level
Brings up the next highest level of the hierarchy. Use this command to navigate through the
hierarchy to the specific material you need.
Check Data
This option is unavailable.

Intergraph Smart® 3D Electrical User's Guide 97

 Route Cableway

CheckData Ignored Inconsistencies

This option is unavailable.
Smart 3D Help
Opens help.
Address
Sets the current location within the hierarchy of available insulation materials. The dropdown
box lists the folders you have visited.

Cableway Settings Dialog Box

Sets options for a cableway while you are routing.
See Also
Cross Section Tab (Cableway Settings Dialog Box) (on page 101)
Defaults Tab (Cableway Settings Dialog Box) (on page 102)
General Tab (Cableway Properties Dialog Box) (on page 116)
General Tab (Cableway Settings Dialog Box) (on page 98)

General Tab (Cableway Settings Dialog Box)

Displays the general properties of the cableway that you are routing.
Because cableway run properties are customizable in the reference data, only the
properties that are required by the software are documented.
Cableway properties are divided into several different categories: Standard, Surface
Treatment and Coating, Cable Fill, Maintenance Volume, and Responsibility. You select
which category that you want to define values for by using the Category option.

Standard
System
Displays or defines the system for the cableway. The last system that you selected is the
default. Select More to display all defined systems. You can create a new system in the
Systems and Specifications task.
Cableway
Displays or defines the name of the cableway that you are creating.
Specification
Displays or defines the specification for the cableway. Specifications are assigned to
systems in the Systems and Specifications task. Only those specifications that are allowed
in the system that you selected appear. You define specifications in the reference data.
For more information on defining specifications, see the Electrical Reference Data Guide,
available from the Help > Printable Guides command in the software.

Intergraph Smart® 3D Electrical User's Guide 98

 Route Cableway

Surface Treatment and Coating

Interior Coating Requirement
Specifies the interior coating requirement for the object. To change the options on the list,
edit the Coating Type sheet in the AllCodeLists.xls workbook in the reference data.
Interior Coating Type
Specifies the type of interior coating for the object. To change the options on the list, edit the
Coating Type sheet in the AllCodeLists.xls workbook in the reference data.
Interior Coating Area
Specifies the area of the interior coating for the object.
Exterior Coating Requirement
Specifies the coating requirement for the object. To change the options on the list, edit the
Coating Type select list in Catalog.
Exterior Coating Type
Specifies the type of coating for the object. To change the options on the list, edit the
Coating Type select list in Catalog.
Exterior Coating Area
Specifies the area of the coating for the object.
Coating Color
Specifies the color of the object coating. To change the options on the list, edit the Coating
Color select list in Catalog. Smart 3D includes this property in the painting area report.

Cable Fill
Fill Efficiency
Specifies the efficiency of the stacking of cables in the cableway. Type a real number,
integer, or percent. For example, type 0.9, 90, or 90%.
Signal Type
Specifies the cable usage, which Smart 3D uses in tray fill calculations. To change the
options on the list, edit the Signal Type select list in Catalog.
Voltage Grade
Specifies the voltage grade, which Smart 3D uses when determining the range of voltage
that the cableway can carry. To change the options on the list, edit the Voltage Grade
select list in Catalog.

Maintenance Volume
A maintenance volume is space reserved for installing and maintaining cables in a cable tray
and can be defined at the cableway level and optionally overridden at the feature level. You can
also define maintenance volumes for duct banks to reserve space for a mud mat below the duct
bank. Use the Format > View command to turn on the Maintenance aspect so you can see the
maintenance volumes in the model.

Intergraph Smart® 3D Electrical User's Guide 99

 Route Cableway

Maintenance Volume Properties Option

Select Use Run Properties to use the maintenance volume properties defined for the
parent run. Select Default Feature Properties to define maintenance volume settings that
are unique for this feature. This option is only available when editing the properties of a
feature.
Maintenance Shape
Specifies the maintenance volume shape: Rectangle, Round, or Flat Oval.
Maintenance Diameter
Specifies the diameter of the maintenance volume. This option is only available when
Maintenance Shape is set to Round.
Maintenance Width
Specifies the width of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Depth
Specifies the depth of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Justification
Specifies how the maintenance volume (gray box below) aligns with the feature (blue cross
section below). There are ten options available: (1) Top Left, (2) Top Center, (3) Top
Right, (4) Center Left, (5) Center Center, (6) Center Right, (7) Bottom Left, (8) Bottom
Center, (9) Bottom Right, and User Defined.

Maintenance Width Offset

Specifies the width offset distance. This option is only available when Maintenance
Justification is set to User Defined.
Maintenance Depth Offset
Specifies the depth offset distance. This option is only available when Maintenance
Justification is set to User Defined.

Responsibility
Cleaning Responsibility
Select the party responsible for cleaning the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Cleaning Responsibility select list in the
Catalog task.

Intergraph Smart® 3D Electrical User's Guide 100

 Route Cableway

Design Responsibility
Select the party responsible for designing the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Design Responsibility select list in the
Catalog task.
Fabrication Responsibility
Select the party responsible for fabricating the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Fabrication Responsibility select list in the
Catalog task.
Installation Responsibility
Select the party responsible for installing the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Installation Responsibility select list in the
Catalog task.
Painting Responsibility
Select the party responsible for painting the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Painting Responsibility select list in the
Catalog task.
Requisition Responsibility
Select the party responsible for ordering the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Requisition Responsibility select list in the
Catalog task.
Supply Responsibility
Select the party responsible for delivering the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Supply Responsibility select list in the
Catalog task.
Testing Responsibility
Select the party responsible for testing the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Testing Responsibility select list in the
Catalog task.

Cross Section Tab (Cableway Settings Dialog Box)

Displays and defines the cross-section properties of the cableway feature.

Standard
Cross Section
Defines the shape of the cross-section. You can select from rectangular, round, and flat
oval. If the cross-section is round, only one other property is available: Diameter.
Width
Sets the width dimension for rectangular and flat oval cross-sections. Values stored in the
reference data determine the list of options. The list displays only the values that are valid
for the current depth. If the Depth box is blank, all widths listed in the current specification
are shown.

Intergraph Smart® 3D Electrical User's Guide 101

 Route Cableway

Depth
Sets the depth of the cross-section for rectangular and flat oval cross-sections. Values
stored in the reference data determine the list of options. The list displays only the values
that are valid for the current width. If the Width box is blank, all depths listed in the current
specification are shown.
Diameter
Determines the diameter of round cross-sections. Values stored in the reference data
determine the list of options. You can also enter a value that is not on the list.
Orientation Angle
Sets an angle between the local axis associated with the cross-section and the width axis. If
the angle value is zero, the width is aligned with the local cross-section axis.
The following picture shows the orientation angle (C).

(A) - Cross-section
(B) - Width axis
(C) - Orientation angle

Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.
See Also
Modify Cableway Feature Cross Section Shape (on page 81)
Modify Multiple Cableway Cross Section Sizes (on page 81)

Defaults Tab (Cableway Settings Dialog Box)

Provides detailed, algebraic measurements for the length of a transition and the radius of a turn.
Transition Length
Defines the length of the transition.
Throat Radius
Displays the throat radius and bend radius of the turn transition. A default value displays
when the command is re-selected.
Turn Type
Allows you to select turn types, like Bend, Miter, and Chamfer, in addition to any other turn
types that the run specification allows. If you change specifications to one with parts, the
software overrides the type of turn that you have set and replaces it with the default turn
type.

Intergraph Smart® 3D Electrical User's Guide 102

 Route Cableway

Remember Working Plane

Allows you to choose whether the software remembers the last used working plane. False
clears the last selected plane so that you must reset the plane each time that you begin
routing. True remembers the last used working plane. The software then remembers your
selection and locks each route onto the plane. The default option is False.
When Remember Working Plane is set to False, the default plane option for Route
Cableway is No Plane. Each time that you click a routing command, the system clears
the last selected Plane option. You must reset the plane option each time that you begin a
route.
However, you can set the default behavior to remember the last used working plane by
setting Remember Working Plane to True. The software then locks the route onto the
plane that you are using and remembers your selection within that session only.
This option is available when you are routing duct, piping, cableways, and
conduits. Setting this option to True when you are in any of these tasks results in an
automatic True setting for all tasks. Likewise, setting this option to False when you are in
any of these tasks results in an automatic False setting for all tasks.

New Cableway Dialog Box

Creates a new cableway run or duct bank in your model using properties that you specify. You
can access the New Cableway dialog box by going to the Electrical task, selecting the Route
Cableway command, and then selecting <New Cableway> from the Run option on the
ribbon.

Standard
System
Displays or defines the system for the cableway. The last system that you selected is the
default. Select More to display all defined systems. You can create a new system in the
Systems and Specifications task.
Cableway
Displays or defines the name of the cableway that you are creating. The name is based on
the Name Rule selection. If you want to type a new name for the run, in the Name Rule
box, select User Defined, and then type a name for the run in the Name box.
Name Rule
Specify the naming rule that you want to use to name this run. You can select one of the
listed rules or select User Defined to specify the run name yourself in the Name box.
Specification
Displays or defines the specification for the cableway. Specifications are assigned to
systems in the Systems and Specifications task. Only those specifications that are allowed
in the system that you selected appear. You define specifications in the reference data.
If you select the DBS-0 specification, Slope option is displayed. If you select a
specification that allows barriers, then the software displays the Barriers tab.
For more information on defining specifications, see the Electrical Reference Data Guide,
available from the Help > Printable Guides command in the software.

Intergraph Smart® 3D Electrical User's Guide 103

 Route Cableway

Number of Barriers
Defines the number of barriers included in the cableway. If you select a specification that
allows barriers and you define several barriers greater than zero, a Barriers tab appears.
Slope
Defines the slope for the duct bank. Enter a value to route a sloped duct bank, or select Not
Sloped to route a duct bank without slope.

Surface Treatment and Coating

Interior Coating Requirement
Specifies the interior coating requirement for the object. To change the options on the list,
edit the Coating Type sheet in the AllCodeLists.xls workbook in the reference data.
Interior Coating Type
Specifies the type of interior coating for the object. To change the options on the list, edit the
Coating Type sheet in the AllCodeLists.xls workbook in the reference data.
Interior Coating Area
Specifies the area of the interior coating for the object.
Exterior Coating Requirement
Specifies the coating requirement for the object. To change the options on the list, edit the
Coating Type select list in Catalog.
Exterior Coating Type
Specifies the type of coating for the object. To change the options on the list, edit the
Coating Type select list in Catalog.
Exterior Coating Area
Specifies the area of the coating for the object.
Coating Color
Specifies the color of the object coating. To change the options on the list, edit the Coating
Color select list in Catalog. Smart 3D includes this property in the painting area report.

Cable Fill
Fill Efficiency
Specifies the efficiency of the stacking of cables in the cableway. Type a real number,
integer, or percent. For example, type 0.9, 90, or 90%.
Signal Type
Specifies the cable usage, which Smart 3D uses in tray fill calculations. To change the
options on the list, edit the Signal Type select list in Catalog.
Voltage Grade
Specifies the voltage grade, which Smart 3D uses when determining the range of voltage
that the cableway can carry. To change the options on the list, edit the Voltage Grade
select list in Catalog.

Intergraph Smart® 3D Electrical User's Guide 104

 Route Cableway

Maintenance Volume
A maintenance volume is space reserved for installing and maintaining cables in a cable tray
and can be defined at the cableway level and optionally overridden at the feature level. You can
also define maintenance volumes for duct banks to reserve space for a mud mat below the duct
bank. Use the Format > View command to turn on the Maintenance aspect so you can see the
maintenance volumes in the model.
Maintenance Volume Properties Option
Select Use Run Properties to use the maintenance volume properties defined for the
parent run. Select Default Feature Properties to define maintenance volume settings that
are unique for this feature. This option is only available when editing the properties of a
feature.
Maintenance Shape
Specifies the maintenance volume shape: Rectangle, Round, or Flat Oval.
Maintenance Diameter
Specifies the diameter of the maintenance volume. This option is only available when
Maintenance Shape is set to Round.
Maintenance Width
Specifies the width of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Depth
Specifies the depth of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Justification
Specifies how the maintenance volume (gray box below) aligns with the feature (blue cross
section below). There are ten options available: (1) Top Left, (2) Top Center, (3) Top
Right, (4) Center Left, (5) Center Center, (6) Center Right, (7) Bottom Left, (8) Bottom
Center, (9) Bottom Right, and User Defined.

Maintenance Width Offset

Specifies the width offset distance. This option is only available when Maintenance
Justification is set to User Defined.
Maintenance Depth Offset
Specifies the depth offset distance. This option is only available when Maintenance
Justification is set to User Defined.

Intergraph Smart® 3D Electrical User's Guide 105

 Route Cableway

Responsibility
Cleaning Responsibility
Select the party responsible for cleaning the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Cleaning Responsibility select list in the
Catalog task.
Design Responsibility
Select the party responsible for designing the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Design Responsibility select list in the
Catalog task.
Fabrication Responsibility
Select the party responsible for fabricating the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Fabrication Responsibility select list in the
Catalog task.
Installation Responsibility
Select the party responsible for installing the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Installation Responsibility select list in the
Catalog task.
Painting Responsibility
Select the party responsible for painting the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Painting Responsibility select list in the
Catalog task.
Requisition Responsibility
Select the party responsible for ordering the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Requisition Responsibility select list in the
Catalog task.
Supply Responsibility
Select the party responsible for delivering the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Supply Responsibility select list in the
Catalog task.
Testing Responsibility
Select the party responsible for testing the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Testing Responsibility select list in the
Catalog task.
See Also
Create New Cableway (on page 76)
Multi-Route Tab (New Cableway Dialog Box) (on page 107)
Duct Bank Tab (New Cableway Dialog Box) (on page 108)
Barriers Tab (New Cableway Dialog Box) (on page 111)

Intergraph Smart® 3D Electrical User's Guide 106

 Route Cableway

Multi-Route Tab (New Cableway Dialog Box)

Displays and defines properties for routing multiple, parallel cableway systems.
Mode
Designates the mode of parallel routing: Along Depth or Along Width. The Along Depth
mode creates stacked cableways, and the Along Width mode creates side-by-side
cableways.

Along Depth Mode

Cableways Above Master Run
Type the number of cableways to be routed above the master run.
Cableways Below Master Run
Type the number of cableways to be routed below the master run.
Vertical Distance Between Trays
Type the vertical distance between the parallel cableways.
Modeling of Riser Sections
Specifies either constant spacing or constant leg length in riser sections. In the current
version, this setting is Maintain Constant Spacing and cannot be changed.

Along Width Mode

Cableways to Left of Master Run
Type the number of cableways to be routed to the left of the master run.
Cableways to Right of Master Run
Type the number of cableways to be routed to the right of the master run.
Horizontal Distance Between Trays
Type the horizontal distance between the parallel cableways.
Modeling of Skewed Sections
Specifies either constant spacing or constant leg length in skewed sections. In the current
version, this setting is Maintain Constant Spacing and cannot be changed.
See Also
Route Multiple, Parallel Cableway Runs (on page 87)

Intergraph Smart® 3D Electrical User's Guide 107

 Route Cableway

Duct Bank Tab (New Cableway Dialog Box)

Displays and defines properties of duct bank systems. To route a duct bank, begin by selecting
a duct Bank Specification on the General tab; that is, DBS-0.

Duct Bank Properties

Click Select Item for Modification > Duct Bank Properties to access the following properties:
Duct Bank Width
Enter the width of the duct bank.

Duct Bank Depth

Enter the depth of the duct bank.

Conduit to Conduit distance

Enter the distance from center-point to center-point on the conduits.

Edge to Conduit distance

Enter the distance from one edge of the duct bank to the conduit center point.

Intergraph Smart® 3D Electrical User's Guide 108

 Route Cableway

Number of Conduit rows

Enter the number of rows.

Number of Conduit columns

Enter the number of columns.

Default Conduit Specification

Enter the conduit type specification.
Default Conduit Diameter
Enter the diameter of the conduit.
Default Conduit Fill Efficiency
Displays or defines the efficiency of the stacking of cables in the conduit. You can enter a
real number, integer, or percent; for example, type 0.9, 90, or 90%.
Default Conduit Signal Type
Displays or defines the cable usage, which is used in tray fill calculations. If you want to add,
edit, or remove values that are available for selection, edit the Signal Type sheet in the
AllCodeLists.xls workbook in the reference data.
Default Conduit Voltage Grade
Displays or defines the voltage grade, which is used in determining the range of voltage that
the conduit can carry. If you want to add, edit, or remove values that are available for
selection, edit the Voltage Grade sheet in the AllCodeLists.xls workbook in the reference
data.

Preview
Shows the cross-section of the duct bank. You can modify individual
conduits by selecting the run number from the Select Item for
Modification box.

Provides a visual cue for the XY orientation.

Resize

Intergraph Smart® 3D Electrical User's Guide 109

 Route Cableway

Validates the duct bank cross-section properties and, if necessary, resizes the duct bank
cross-section.
Delete Conduit Run
Deletes the selected conduit run from the duct bank cross-section. This command is
enabled only when editing a conduit run properties.

Go To Defaults
Resets all conduits to the default values.

Add Conduit Run

Adds a new conduit run.

Run N x N
Click Select Item for Modification > Run NxN to access the following properties:
Conduit Run
Select the parent conduit run for the selected conduit.
Conduit RunName
Accept the default name or enter a name for the conduit.
Conduit Spec
Select from the specs available in the options list.
Conduit Diameter
Select from the allowable diameters available in the Options list.
Distance Along Width Direction
Enter value to position the conduit in the X direction.
Distance Along Depth Direction
Enter value to position the conduit in the Y direction.
Row Number
Enter a new position for the conduit. If you enter a number that already holds a conduit, the
conduits will "sit" on each other and you cannot readily see them. However, you can see this
in Preview.
Column Number
Enter a new position for the conduit. If you enter a number that already holds a conduit, the
conduits will "sit" on each other and you cannot readily see them. However, you can see this
in Preview.
Fill Efficiency
Enter the percentage cable fill capacity of the conduit.
Signal Type
Select the signal type from the available options list.
Voltage Grade

Intergraph Smart® 3D Electrical User's Guide 110

 Route Cableway

Select the voltage grade from the available options list.

See also
Route Duct Bank (on page 92)

Barriers Tab (New Cableway Dialog Box)

Displays and defines properties of any barriers included in the cable tray. To display this dialog
box, you must select the appropriate Specification and enter the Number Of Barriers on the
General tab of the New Cableway dialog box.
Select Item for Modification
Select the partition created by the barrier that you want to modify. To assist you in locating
the correct partition, the cableway symbol at the bottom of the dialog box highlights the
partition selected.

Go to Defaults
Resets all partitions or cable trays to default settings.

Delete Barrier
Deletes the selected barrier from the cable tray.

Add Barrier
Adds a new barrier to the cable tray.
<CableTray Properties>
Indicates that you are modifying the main cableway.
▪ CableTray Width - Specifies the width of the entire cable tray.
▪ CableTray Depth - Specifies the depth of the entire cable tray.
▪ Default Cableway Spec - Specifies the specification to be used as the default.
▪ Default Minimum Cableway Barrier Width - Specifies the minimum width value for the
barrier/divider. The partitions are symmetrical until you change them.
<CableWay1 Properties>
Indicates that you are modifying the first new partition. Select <CableWay2 Properties> to
select the second partition, and so forth.
▪ CableWay Run - Select the cableway to which you want to attach this particular
partition.
▪ CableWay Run Name - Accept the default name or enter a name for the cableway run.
▪ Cableway Spec - Displays the specification of the enclosing cableway. This option is
read-only.
▪ Offset Along Width Direction - You cannot change this value for Cableway 1.
However, it can be modified for the other partitions.
▪ Fill Efficiency - Specifies the percentage cable fill capacity for the partition.
▪ Signal Type - Enter the signal type of the cable for this particular partition.
▪ Voltage Grade - Enter the voltage grade of the cable for this particular partition.

Intergraph Smart® 3D Electrical User's Guide 111

 Route Cableway

Preview

Illustrates the number of barriers in the cable tray, and the number of resulting partitions.
Additional highlighting appears when you select an item for modification. (See the red lines
in the following illustration.)

The partitions are symmetrical in size until you change them.

Provides a visual cue for the XY orientation.

See Also
Define Cable Tray Barriers (on page 84)

Select Cableway Dialog Box

Displays all the cableways. Select a cableway from the hierarchy, and then click OK.
Look In options are currently only available for Quick Route .
Look In
Specifies that location in which you want to look for the cableway.
▪ Workspace - Displays all cableways placed in the defined workspace only.
▪ Database - Displays all the cableways available in the entire model database.
See Also
Route Cableway (on page 66)

Intergraph Smart® 3D Electrical User's Guide 112

 Route Cableway

Cable Tray Component Properties Dialog Box

Displays cable tray component properties for review and editing.
See Also
Configuration Tab (on page 290)
Connections Tab (on page 292)
Notes Tab (on page 299)
Relationships Tab (on page 300)

Cable Tray Part Properties Dialog Box

Displays cable tray part properties for review and editing.
See Also
Configuration Tab (on page 290)
Connections Tab (on page 292)
Edit Cable Tray Part Properties (on page 56)
Notes Tab (on page 299)
Relationships Tab (on page 300)

Cableway Along Leg Feature Properties Dialog Box

Displays along-leg feature properties for review and editing.
See Also
Configuration Tab (on page 290)
Edit Cableway Along Leg Feature Properties (see "Edit cableway along-leg feature properties"
on page 56)
General Tab (Cableway Along Leg Feature Properties Dialog Box) (on page 113)
Relationships Tab (on page 300)

General Tab (Cableway Along Leg Feature Properties Dialog

Box)
Displays and defines the general properties of the selected cableway along-leg feature.

Standard
Cableway
Specifies the name of the cableway run associated with the feature. You can select another
run from the list, if necessary.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different electrical system. For more information, see Select Cableway
Dialog Box (on page 112).
Specification
Determines the specification assigned to the feature.

Intergraph Smart® 3D Electrical User's Guide 113

 Route Cableway

Angle
Sets the angle of the along-leg feature.
Part
Allows you to select a part associated with the feature, if applicable.

Maintenance Volume
A maintenance volume is space reserved for installing and maintaining cables in a cable tray
and can be defined at the cableway level and optionally overridden at the feature level. You can
also define maintenance volumes for duct banks to reserve space for a mud mat below the duct
bank. Use the Format > View command to turn on the Maintenance aspect so you can see the
maintenance volumes in the model.
Maintenance Volume Properties Option
Select Use Run Properties to use the maintenance volume properties defined for the
parent run. Select Default Feature Properties to define maintenance volume settings that
are unique for this feature. This option is only available when editing the properties of a
feature.
Maintenance Shape
Specifies the maintenance volume shape: Rectangle, Round, or Flat Oval.
Maintenance Diameter
Specifies the diameter of the maintenance volume. This option is only available when
Maintenance Shape is set to Round.
Maintenance Width
Specifies the width of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Depth
Specifies the depth of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Justification
Specifies how the maintenance volume (gray box below) aligns with the feature (blue cross
section below). There are ten options available: (1) Top Left, (2) Top Center, (3) Top
Right, (4) Center Left, (5) Center Center, (6) Center Right, (7) Bottom Left, (8) Bottom
Center, (9) Bottom Right, and User Defined.

Intergraph Smart® 3D Electrical User's Guide 114

 Route Cableway

Maintenance Width Offset

Specifies the width offset distance. This option is only available when Maintenance
Justification is set to User Defined.
Maintenance Depth Offset
Specifies the depth offset distance. This option is only available when Maintenance
Justification is set to User Defined.

Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.
See Also
Cableway Along Leg Feature Properties Dialog Box (on page 113)

Cableway End Feature Properties Dialog Box

Displays end feature properties for review and editing.
See Also
Configuration Tab (on page 290)
Edit Cableway End Feature Properties (on page 56)
General Tab (Cableway End Feature Properties Dialog Box) (on page 115)
Relationships Tab (on page 300)

General Tab (Cableway End Feature Properties Dialog Box)

Displays and defines the general properties of the selected cableway end feature.

Standard
Cableway
Displays the name of the cableway end feature.
Specification
Displays the specification for the cableway. Specifications are assigned to systems in the
Systems and Specifications task.
Part
Displays the part associated with the end, if applicable.

Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.
See Also
Cableway End Feature Properties Dialog Box (on page 115)

Intergraph Smart® 3D Electrical User's Guide 115

 Route Cableway

Cableway Properties Dialog Box

Displays cableway run properties for review and editing.
See Also
General Tab (Cableway Properties Dialog Box) (on page 116)
Relationships Tab (on page 300)
Configuration Tab (on page 290)
Notes Tab (on page 299)

General Tab (Cableway Properties Dialog Box)

Displays and defines the general properties of the selected cableway.
Because cableway run properties are customizable in the reference data, only the
properties that are required by the software are documented.
Cableway run properties are divided into several different categories: Standard, Surface
Treatment and Coating, Cable Fill, and Responsibility. You select which category that you
want to define values for by using the Category option.

Standard
System
Displays or defines the system for the cableway. The last system that you selected is the
default. Select More to display all defined systems. You can create a new system in the
Systems and Specifications task.
Cableway
Displays or defines the name of the cableway that you are creating. The name is based on
the Name Rule selection. If you want to type a new name for the run, in the Name Rule
box, select User Defined, and then type a name for the run in the Name box.
Name Rule
Specify the naming rule that you want to use to name this run. You can select one of the
listed rules or select User Defined to specify the run name yourself in the Name box.
Specification
Displays or defines the specification for the cableway. Specifications are assigned to
systems in the Systems and Specifications task. Only those specifications that are allowed
in the system that you selected appear. You define specifications in the reference data.
If you select the DBS-0 specification, Slope option is displayed. If you select a
specification that allows barriers, then the software displays the Barriers tab.
For more information on defining specifications, see the Electrical Reference Data Guide,
available from the Help > Printable Guides command in the software.
Number of Barriers
Defines the number of barriers included in the cableway. If you select a specification that
allows barriers and you define several barriers greater than zero, a Barriers tab appears.
Slope
Defines the slope for the duct bank. Enter a value to route a sloped duct bank, or select Not

Intergraph Smart® 3D Electrical User's Guide 116

 Route Cableway

Sloped to route a duct bank without slope.

Surface Treatment and Coating

Interior Coating Requirement
Specifies the interior coating requirement for the object. To change the options on the list,
edit the Coating Type sheet in the AllCodeLists.xls workbook in the reference data.
Interior Coating Type
Specifies the type of interior coating for the object. To change the options on the list, edit the
Coating Type sheet in the AllCodeLists.xls workbook in the reference data.
Interior Coating Area
Specifies the area of the interior coating for the object.
Exterior Coating Requirement
Specifies the coating requirement for the object. To change the options on the list, edit the
Coating Type select list in Catalog.
Exterior Coating Type
Specifies the type of coating for the object. To change the options on the list, edit the
Coating Type select list in Catalog.
Exterior Coating Area
Specifies the area of the coating for the object.
Coating Color
Specifies the color of the object coating. To change the options on the list, edit the Coating
Color select list in Catalog. Smart 3D includes this property in the painting area report.

Cable Fill
Fill Efficiency
Specifies the efficiency of the stacking of cables in the cableway. Type a real number,
integer, or percent. For example, type 0.9, 90, or 90%.
Signal Type
Specifies the cable usage, which Smart 3D uses in tray fill calculations. To change the
options on the list, edit the Signal Type select list in Catalog.
Voltage Grade
Specifies the voltage grade, which Smart 3D uses when determining the range of voltage
that the cableway can carry. To change the options on the list, edit the Voltage Grade
select list in Catalog.

Intergraph Smart® 3D Electrical User's Guide 117

 Route Cableway

Maintenance Volume
A maintenance volume is space reserved for installing and maintaining cables in a cable tray
and can be defined at the cableway level and optionally overridden at the feature level. You can
also define maintenance volumes for duct banks to reserve space for a mud mat below the duct
bank. Use the Format > View command to turn on the Maintenance aspect so you can see the
maintenance volumes in the model.
Maintenance Volume Properties Option
Select Use Run Properties to use the maintenance volume properties defined for the
parent run. Select Default Feature Properties to define maintenance volume settings that
are unique for this feature. This option is only available when editing the properties of a
feature.
Maintenance Shape
Specifies the maintenance volume shape: Rectangle, Round, or Flat Oval.
Maintenance Diameter
Specifies the diameter of the maintenance volume. This option is only available when
Maintenance Shape is set to Round.
Maintenance Width
Specifies the width of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Depth
Specifies the depth of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Justification
Specifies how the maintenance volume (gray box below) aligns with the feature (blue cross
section below). There are ten options available: (1) Top Left, (2) Top Center, (3) Top
Right, (4) Center Left, (5) Center Center, (6) Center Right, (7) Bottom Left, (8) Bottom
Center, (9) Bottom Right, and User Defined.

Maintenance Width Offset

Specifies the width offset distance. This option is only available when Maintenance
Justification is set to User Defined.
Maintenance Depth Offset
Specifies the depth offset distance. This option is only available when Maintenance
Justification is set to User Defined.

Intergraph Smart® 3D Electrical User's Guide 118

 Route Cableway

Responsibility
Cleaning Responsibility
Select the party responsible for cleaning the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Cleaning Responsibility select list in the
Catalog task.
Design Responsibility
Select the party responsible for designing the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Design Responsibility select list in the
Catalog task.
Fabrication Responsibility
Select the party responsible for fabricating the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Fabrication Responsibility select list in the
Catalog task.
Installation Responsibility
Select the party responsible for installing the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Installation Responsibility select list in the
Catalog task.
Painting Responsibility
Select the party responsible for painting the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Painting Responsibility select list in the
Catalog task.
Requisition Responsibility
Select the party responsible for ordering the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Requisition Responsibility select list in the
Catalog task.
Supply Responsibility
Select the party responsible for delivering the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Supply Responsibility select list in the
Catalog task.
Testing Responsibility
Select the party responsible for testing the cableway. If you want to add, edit, or remove
values that are available for selection, edit the Testing Responsibility select list in the
Catalog task.
See Also
Cableway Settings Dialog Box (on page 98)

Intergraph Smart® 3D Electrical User's Guide 119

 Route Cableway

Cableway Straight Feature Properties Dialog Box

Displays straight feature properties for review and editing.
See Also
Configuration Tab (on page 290)
Cross Section Tab (Cableway Straight Feature Properties Dialog Box) (on page 122)
Edit Cableway Straight Feature Properties (on page 56)
General Tab (Cableway Straight Feature Properties Dialog Box) (on page 120)
General Tab (Conduit Straight Feature Properties Dialog Box) (on page 166)
Relationships Tab (on page 300)

General Tab (Cableway Straight Feature Properties Dialog

Box)
Displays and defines the general properties of the selected cableway straight feature.

Standard
Cableway
Specifies the name of the cableway associated with the feature. You can select another run
from the list if necessary.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different electrical system. For more information, see Select Cableway
Dialog Box (on page 112).
Specification
Determines the specification assigned to the cableway.
Length
Specifies the length of the object as routed.

Maintenance Volume
A maintenance volume is space reserved for installing and maintaining cables in a cable tray
and can be defined at the cableway level and optionally overridden at the feature level. You can
also define maintenance volumes for duct banks to reserve space for a mud mat below the duct
bank. Use the Format > View command to turn on the Maintenance aspect so you can see the
maintenance volumes in the model.
Maintenance Volume Properties Option
Select Use Run Properties to use the maintenance volume properties defined for the
parent run. Select Default Feature Properties to define maintenance volume settings that
are unique for this feature. This option is only available when editing the properties of a
feature.
Maintenance Shape
Specifies the maintenance volume shape: Rectangle, Round, or Flat Oval.
Maintenance Diameter

Intergraph Smart® 3D Electrical User's Guide 120

 Route Cableway

Specifies the diameter of the maintenance volume. This option is only available when
Maintenance Shape is set to Round.
Maintenance Width
Specifies the width of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Depth
Specifies the depth of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Justification
Specifies how the maintenance volume (gray box below) aligns with the feature (blue cross
section below). There are ten options available: (1) Top Left, (2) Top Center, (3) Top
Right, (4) Center Left, (5) Center Center, (6) Center Right, (7) Bottom Left, (8) Bottom
Center, (9) Bottom Right, and User Defined.

Maintenance Width Offset

Specifies the width offset distance. This option is only available when Maintenance
Justification is set to User Defined.
Maintenance Depth Offset
Specifies the depth offset distance. This option is only available when Maintenance
Justification is set to User Defined.

Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.
See Also
Cableway Straight Feature Properties Dialog Box (on page 120)

Intergraph Smart® 3D Electrical User's Guide 121

 Route Cableway

Cross Section Tab (Cableway Straight Feature Properties

Dialog Box)
Displays and defines the cross-section properties of the selected cableway straight feature.

Standard
Cross Section
Defines the shape of the cross-section. You can select from rectangular, round, and flat
oval. If the cross-section is round, only one other property is available: Diameter.
Width
Sets the width dimension for rectangular and flat oval cross-sections. Values stored in the
reference data determine the list of options. The list displays only the values that are valid
for the current depth. If the Depth box is blank, all widths listed in the current specification
are shown.
Depth
Sets the depth of the cross-section for rectangular and flat oval cross-sections. Values
stored in the reference data determine the list of options. The list displays only the values
that are valid for the current width. If the Width box is blank, all depths listed in the current
specification are shown.
Diameter
Determines the diameter of round cross-sections. Values stored in the reference data
determine the list of options. You can also enter a value that is not on the list.
Orientation Angle
Sets an angle between the local axis associated with the cross-section and the width axis. If
the angle value is zero, the width is aligned with the local cross-section axis.
The following picture shows the orientation angle (C).

(A) - Cross-section
(B) - Width axis
(C) - Orientation angle

Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.
See Also
Cableway Straight Feature Properties Dialog Box (on page 120)

Intergraph Smart® 3D Electrical User's Guide 122

 Route Cableway

Cableway Transition Feature Properties Dialog Box

Displays cableway transition properties for review and editing.
See Also
Configuration Tab (on page 290)
Cross Section Tab (Cableway Transition Feature Properties Dialog Box) (on page 124)
Edit Cableway Transition Feature Properties (on page 56)
General Tab (Cableway Transition Feature Properties Dialog Box) (on page 123)
Modify Multiple Cableway Cross Section Sizes (on page 81)
Modify Cableway Feature Cross Section Shape (on page 81)
Relationships Tab (on page 300)

General Tab (Cableway Transition Feature Properties Dialog

Box)
Displays and defines the general properties of the selected transition.

Standard
Cableway
Specifies the name of the cableway run associated with the transition feature. You can
select another run from the list if necessary.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different electrical system. For more information, see Select Cableway
Dialog Box (on page 112).
Specification
Specifies the cableway specification from a list of allowed specifications for the associated
system. Specifications are assigned to systems in the Systems and Specifications task.
Transition Type
Displays the type of the transition, such as parallel.
Part
Specifies a part associated with the transition, if applicable.
Length
Specifies the length of the transition along the cableway. This box appears for straight
slanted transitions only.

Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.
See Also
Cableway Transition Feature Properties Dialog Box (on page 123)

Intergraph Smart® 3D Electrical User's Guide 123

 Route Cableway

Cross Section Tab (Cableway Transition Feature Properties

Dialog Box)
Displays and defines the cross-section properties of the selected transition.

Standard
Position
Displays or defines the start or end face of the transition.
Cross Section
Defines the shape of the cross section. You can select from rectangular, round, and flat
oval. If the cross section is round, only one other property is available: Diameter.
Width
Sets the width dimension for rectangular and flat oval cross sections. Values stored in the
reference data determine the list of options. The list displays only the values that are valid
for the current depth. If the depth is not defined (that is, the Depth box is blank), all widths
listed in the current specification are shown.
Depth
Sets the depth of the cross section for rectangular and flat oval cross sections. Values
stored in the reference data determine the list of options. The list displays only the values
that are valid for the current width. If the width is not defined (that is, the Width box is
blank), all depths listed in the current specification are shown.
Diameter
Determines the diameter for round cross sections. Values stored in the reference data
determine the list of options. You can also enter a value that is not on the list.
Orientation Angle
Sets an angle between the local axis associated with the cross-section and the width axis. If
the angle value is zero, the width is aligned with the local cross-section axis.
The following picture shows the orientation angle (C).

(A) - Cross-section
(B) - Width axis
(C) - Orientation angle

Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.

Intergraph Smart® 3D Electrical User's Guide 124

 Route Cableway

Cableway Turn Feature Properties Dialog Box

Displays elbows, bends, and other turn properties for review and editing.
See Also
Configuration Tab (on page 290)
Cross Section Tab (Cableway Turn Feature Properties Dialog Box) (on page 127)
Edit Cableway Turn Feature Properties (on page 55)
General Tab (Cableway Turn Feature Properties Dialog Box) (on page 125)
Relationships Tab (on page 300)

General Tab (Cableway Turn Feature Properties Dialog Box)

Displays and defines the general properties of the selected cableway turn feature.

Standard
Cableway
Specifies the name of the cableway to which the feature is assigned.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different electrical system. For more information, see Select Cableway
Dialog Box (on page 112).
Specification
Determines the specification assigned to the cableway.
Angle
Displays the measurement of the angle of the turn. You cannot edit the value.
Type
Allows you to select turn types, like Bend, Miter, or Chamfer, in addition to any other turn
types that the run specification allows. If you change specifications to one with parts, the
software overrides the type of turn that you have set and replaces it with the default turn
type.
Throat Radius
Modifies the throat radius of the turn transition. The list displays the last ten radii that you
entered.
Number of Miters
Specifies the number of miters for the turn. If you change the angle of the turn, the software
resets the number of miters to the default number defined for the new angle in the reference
data.
The Number of Miters box is cleared if the active specification contains parts.
Part
Displays the default part assigned to the turn type. You can override the default part and
select a part manually.

Intergraph Smart® 3D Electrical User's Guide 125

 Route Cableway

Maintenance Volume
A maintenance volume is space reserved for installing and maintaining cables in a cable tray
and can be defined at the cableway level and optionally overridden at the feature level. You can
also define maintenance volumes for duct banks to reserve space for a mud mat below the duct
bank. Use the Format > View command to turn on the Maintenance aspect so you can see the
maintenance volumes in the model.
Maintenance Volume Properties Option
Select Use Run Properties to use the maintenance volume properties defined for the
parent run. Select Default Feature Properties to define maintenance volume settings that
are unique for this feature. This option is only available when editing the properties of a
feature.
Maintenance Shape
Specifies the maintenance volume shape: Rectangle, Round, or Flat Oval.
Maintenance Diameter
Specifies the diameter of the maintenance volume. This option is only available when
Maintenance Shape is set to Round.
Maintenance Width
Specifies the width of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Depth
Specifies the depth of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Justification
Specifies how the maintenance volume (gray box below) aligns with the feature (blue cross
section below). There are ten options available: (1) Top Left, (2) Top Center, (3) Top
Right, (4) Center Left, (5) Center Center, (6) Center Right, (7) Bottom Left, (8) Bottom
Center, (9) Bottom Right, and User Defined.

Maintenance Width Offset

Specifies the width offset distance. This option is only available when Maintenance
Justification is set to User Defined.
Maintenance Depth Offset
Specifies the depth offset distance. This option is only available when Maintenance
Justification is set to User Defined.

Intergraph Smart® 3D Electrical User's Guide 126

 Route Cableway

Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.

Cross Section Tab (Cableway Turn Feature Properties

Dialog Box)
Displays and defines the cross-section properties of the selected cableway turn feature.

Standard
Cross Section
Defines the shape of the cross-section. You can select from rectangular, round, and flat
oval. If the cross-section is round, only one other property is available: Diameter.
Width
Sets the width dimension for rectangular and flat oval cross-sections. Values stored in the
reference data determine the list of options. The list displays only the values that are valid
for the current depth. If the Depth box is blank, all widths listed in the current specification
are shown.
Depth
Sets the depth of the cross-section for rectangular and flat oval cross-sections. Values
stored in the reference data determine the list of options. The list displays only the values
that are valid for the current width. If the Width box is blank, all depths listed in the current
specification are shown.
Diameter
Determines the diameter of round cross-sections. Values stored in the reference data
determine the list of options. You can also enter a value that is not on the list.
Orientation Angle
Sets an angle between the local axis associated with the cross-section and the width axis. If
the angle value is zero, the width is aligned with the local cross-section axis.
The following picture shows the orientation angle (C).

(A) - Cross-section
(B) - Width axis
(C) - Orientation angle

Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.

Intergraph Smart® 3D Electrical User's Guide 127

 Route Cableway

Cableway Turn Transition Feature Properties Dialog

Box
Displays cableway turn transition properties for review and editing.
See Also
Configuration Tab (on page 290)
Cross Section Tab (Cableway Turn Transition Feature Properties Dialog Box) (on page 129)
General Tab (Cableway Turn Transition Feature Properties Dialog Box) (on page 128)
Relationships Tab (on page 300)

General Tab (Cableway Turn Transition Feature Properties

Dialog Box)
Displays and defines the general properties of the selected transition.

Standard
Cableway
Specifies the name of the cableway associated with the transition feature. You can select
another run from the list if necessary.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different electrical system. For more information, see Select Cableway
Dialog Box (on page 112).
Specification
Displays or defines the cableway specification from a list of allowed specifications for the
associated system. Specifications are assigned to systems in the Systems and
Specifications task.
Transition Type
Displays the type of the transition, such as parallel.
Part
Displays or defines a part associated with the transition, if applicable.
Throat Radius
Displays or defines the throat radius of the transition. The list displays the last ten radii that
you entered. This box appears for turn transitions only.
Angle
Displays or defines the angle of the transition. This box appears for turn transitions only.

Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.

Intergraph Smart® 3D Electrical User's Guide 128

 Route Cableway

Cross Section Tab (Cableway Turn Transition Feature

Properties Dialog Box)
Displays and defines the cross-section properties of the selected transition.

Standard
Position
Indicates the position of the cross-section.
▪ Start: The property values that follow define the cross-section at the start point of the
cableway turn transition feature.
▪ End: The property values that follow define the cross-section at the end point of the
cableway turn transition feature.
Cross Section
Defines the shape of the cross-section. You can select from rectangular, round, and flat
oval. If the cross-section is round, only one other property is available: Diameter.
Width
Sets the width dimension for rectangular and flat oval cross-sections. Values stored in the
reference data determine the list of options. The list displays only the values that are valid
for the current depth. If the Depth box is blank, all widths listed in the current specification
are shown.
Depth
Sets the depth of the cross-section for rectangular and flat oval cross-sections. Values
stored in the reference data determine the list of options. The list displays only the values
that are valid for the current width. If the Width box is blank, all depths listed in the current
specification are shown.
Diameter
Determines the diameter of round cross-sections. Values stored in the reference data
determine the list of options. You can also enter a value that is not on the list.
Orientation Angle
Sets an angle between the local axis associated with the cross-section and the width axis. If
the angle value is zero, the width is aligned with the local cross-section axis.
The following picture shows the orientation angle (C).

(A) - Cross-section
(B) - Width axis
(C) - Orientation angle

Intergraph Smart® 3D Electrical User's Guide 129

 Route Cableway

Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.

Intergraph Smart® 3D Electrical User's Guide 130

SECTION 5

Route Conduit

Creates, models, and extends conduit runs quickly and

precisely. Conduit houses and protects cable in the model.
Conduit run features and components are driven by
constraints, specifications, and catalog data. With this
command, you can:
▪ Route new conduit in free space
▪ Route using an existing conduit run
▪ Route conduit in a duct bank
▪ Route conduit to or from a feature
▪ Insert components on a conduit run
You define the geometry and properties of a conduit run and add features and components that
are driven by specifications and catalogs. There are relationships and concepts that you need to
know before you start routing conduit, see Conduits (on page 19).
By default, the software uses fast mode routing, which means that you do not see elbow or turn
graphics while in dynamic display. Press SHIFT+F to toggle fast mode on and off. After you
define the conduit run location, the software displays the elbows.
To route using an existing run, we recommend that you first select the
appropriate conduit run from the Run box. By adapting this practice, you can avoid:
▪ unnecessary activation of the New Conduit Run dialog box.
▪ creating empty runs or redundant runs.
▪ re-work required to delete the empty or redundant runs.

Route Conduit Ribbon

Provides commands for placing conduit.
Properties
Displays the Conduit Settings dialog box. For more information, see Conduit Settings
Dialog Box (on page 150).

Start Route
Click to specify the starting location for the conduit.
End Route
Click to specify the terminating location for the conduit.
Plane
Activates options for selecting a working plane for the route path. Six options are available:

Intergraph Smart® 3D Electrical User's Guide 131

 Route Conduit

▪ Plan Plane
Defines the work surface as the XY plane at the depth of the active end. You also can
press CTRL+1 to select this option.

▪ Elevation Plane: East-West ( Z Plane: X-Axis)

Defines the work surface as the XZ plane. You also can press CTRL+2 to select this
option.
▪ Elevation Plane: North-South ( Z Plane: Y-Axis)
Defines the work surface as the YZ plane. You also can press CTRL+3 to select this
option.
▪ Plane by Turn/Branch
Defines the work surface as the plane defined by an existing turn or branch. You select
the turn or branch to set the plane. You also can press CTRL+4 to select this option.
▪ Plane by Three Points
Defines the work surface using three points that you define. You also can press
CTRL+5 to select this option.
▪ No Plane
Clears any work surfaces. The software does not project points that you place to any
plane. You also can press CTRL+6 to select this option.
Run
Displays existing conduit runs along with the <New Conduit Run>, <New/Continue Run>,
<Select Graphically>, <Load More Runs>, and More options.
<New Conduit Run> displays the New Conduit Run dialog box. Use this option to create a
new conduit run.
<New/Continue Run> extends an existing conduit run if you select the end feature of the
conduit run. If a run is continued, all runs associated with the parent system display in the
list. If you do not select an end feature, the New Conduit Run dialog box displays to create
a conduit run. For more information, see New Conduit Run Dialog Box (on page 153).
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
▪ More displays the Select Conduit dialog box. Use this option to select a conduit run
that is associated with a different conduit system. For more information, see Select
Conduit Dialog Box (on page 157).

Angle Lock
Locks or unlocks the Angle box.
Angle
Enter or select an angle for the current route segment. You can enter any value needed,
provided it does not conflict with the defined specifications. If the Angle Lock is unlocked,
this box displays a dynamic readout of the current bend angle.

Intergraph Smart® 3D Electrical User's Guide 132

 Route Conduit

Length Lock
Locks or unlocks the Length box.
Length
Enter or select a length for the current route segment.
Offset
Controls the SmartSketch offset constraint. Type the distance that you want to offset the
conduit that you are routing. Select <Disabled> if you do not want to use the offset
constraint to help route the conduit. Select Set Offset Reference to define the reference
point. For more information on setting the reference point, see Set Offset Reference Dialog
Box (Conduit) (on page 157).

Edit Conduit Along-leg Feature Ribbon

Displays options for conduit along-leg features placed in the model.
Properties
Displays the Conduit Branch Feature Properties dialog box. For more information, see
Conduit Branch Feature Properties Dialog Box (on page 159).
Move From
Click to specify the starting location of the move vector. If you do not define a starting point,
the software assumes that the current location of the object is the starting point.
Move To
Click to specify the ending location of the move vector.
Run
Specifies the name of the conduit run to which the along-leg feature is associated. You can
select another conduit run can be if necessary.
<New Conduit Run> displays the New Conduit Run dialog box. Use this option to create a
new conduit run.
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Conduit dialog box. Use this option to select a conduit run that is
associated with a different conduit system. For more information, see Select Conduit Dialog
Box (on page 157).
Type
Displays the short code associated with the selected along-leg feature. The Type list also
contains the short codes associated with any other end components defined in the
specification for the current nominal diameter. Selecting an entry from the Type list replaces
the selected component with one of a different type.

Intergraph Smart® 3D Electrical User's Guide 133

 Route Conduit

Option
Displays the option of the selected along-leg feature. The Option list also contains any
options defined in the specification for the short code selected in the Type box. Selecting
another entry from the Option list updates the object accordingly.
Flip
Orients the branch so that the selected port is located at the insertion point. If a tee or other
tee-tee branch is located along the length of a conduit or between two components, only the
in-line ports of the component are available when flipping. However, if the same component
is located at the end of a run, all component ports are available.
Angle 1
Specifies the angle of the branch.
Angle 2
Specifies the angle of the turn or branch feature located at the other end of the branch leg. If
this box is blank, there is no turn or branch feature located at the end of the branch leg.

Edit Conduit Branch Feature Ribbon

Displays options for conduit branches placed in the model.
Properties
Displays the Conduit Branch Feature Properties dialog box. For more information, see
Conduit Branch Feature Properties Dialog Box (on page 159).
Move From
Click to specify the starting location of the move vector. If you do not define a starting point,
the software assumes that the current location of the object is the starting point.
Move To
Click to specify the ending location of the move vector.
Run
Specifies the name of the conduit run to which the branch feature is associated. You can
select another conduit run can be if necessary.
<New Conduit Run> displays the New Conduit Run dialog box. Use this option to create a
new conduit run.
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Conduit dialog box. Use this option to select a conduit run that is
associated with a different conduit system. For more information, see Select Conduit Dialog
Box (on page 157).

Intergraph Smart® 3D Electrical User's Guide 134

 Route Conduit

Type
Displays the type of the selected branch feature. The Type list also contains the short codes
associated with any other end components defined in the specification for the current
nominal diameter. Selecting an entry from the Type list replaces the selected component
with one of a different type.
Option
Displays the option of the selected branch feature. The Option list also contains any options
defined in the specification for the short code selected in the Type box. Selecting another
entry from the Option list updates the object accordingly.
Flip
Orients the branch so that the selected port is located at the insertion point. If a tee or other
tee-tee branch is located along the length of a conduit or between two components, only the
in-line ports of the component are available when flipping. However, if the same component
is located at the end of a run, all component ports are available.
Angle 1
Specifies the angle of the branch.
Angle 2
Specifies the angle of the turn or branch feature located at the other end of the branch leg. If
this box is blank, there is no turn or branch feature located at the end of the branch leg.

Edit Conduit End Feature Ribbon

Displays options for editing an end component, such as a plug.
Properties
Displays the Conduit End Feature Properties dialog box. For more information, see
Conduit End Feature Properties Dialog Box (on page 162).
Move From
Click to specify the starting location of the move vector. If you do not define a starting point,
the software assumes that the current location of the object is the starting point.
Move To
Click to specify the ending location of the move vector.
When you move, or modify a route object in HVAC, Electrical, or Piping, Smart 3D
treats any unfinished ends as free end features. An unfinished end is an end with mating parts
or a logical data connection with one logical port. You can reconnect using these free end
features. This behavior allows you to reuse existing mating parts and connections and reduces
wait times.
Plane
Activates options for selecting a working plane for the route path. Six options are available:
▪ Plan Plane
Defines the work surface as the XY plane at the depth of the active end. You also can
press CTRL+1 to select this option.

Intergraph Smart® 3D Electrical User's Guide 135

 Route Conduit

▪ Elevation Plane: East-West ( Z Plane: X-Axis)

Defines the work surface as the XZ plane. You also can press CTRL+2 to select this
option.
▪ Elevation Plane: North-South ( Z Plane: Y-Axis)
Defines the work surface as the YZ plane. You also can press CTRL+3 to select this
option.
▪ Plane by Turn/Branch
Defines the work surface as the plane defined by an existing turn or branch. You select
the turn or branch to set the plane. You also can press CTRL+4 to select this option.
▪ Plane by Three Points
Defines the work surface using three points that you define. You also can press
CTRL+5 to select this option.
▪ No Plane
Clears any work surfaces. The software does not project points that you place to
any plane. You also can press CTRL+6 to select this option.
Run
Displays the name of the conduit run with which the selected end feature is associated.
Type
Displays the short code associated with the selected end. The Type list also contains the
short codes associated with any other end components defined in the specification for the
current nominal diameter. Selecting an entry from the Type list replaces the selected end
component with one of a different type.
Option
Displays the option of the selected end. The Option list also contains any options defined in
the specification for the short code selected in the Type box. Selecting another entry from
the Option list updates the object accordingly.

Angle Lock
Locks or unlocks the Angle box.
Angle
Displays the angle of any turn or branch component that is located at the other end of the
leg with which the selected end feature is associated. If no turn or branch exists at the other
end of the leg, then this box is disabled. Changing the angle value adjusts the position of the
selected end feature to achieve the specified angle and then locks that angle value. When
this box is unlocked, the value updates dynamically as the selected end component is
moved.

Length Lock
Locks or unlocks the Length box.

Intergraph Smart® 3D Electrical User's Guide 136

 Route Conduit

Length
Displays the length of the conduit connected to the end being edited. Entering a value in this
box adjusts the position of the selected end feature to achieve the specified length and then
locks that length value. When this box is unlocked, the value updates dynamically as the
selected end component is moved.
Offset
Controls the SmartSketch® offset constraint. Type the distance that you want to offset the
conduit that you are routing. Select <Disabled> if you do not want to use the offset
constraint to help route the conduit. Select Set Offset Reference to define the reference
point. For more information on setting the reference point, see Set Offset Reference Dialog
Box (Conduit) (on page 157).

Edit Conduit Straight Feature Ribbon

Displays options for editing a conduit straight feature.
Properties
Displays the Conduit Straight Feature Properties dialog box. For more information, see
Conduit Straight Feature Properties Dialog Box (on page 166).
Move From
Click to specify the starting location of the move vector. If you do not define a starting point,
the software assumes that the current location of the object is the starting point.
Move To
Click to specify the ending location of the move vector.
Plane
Activates options for selecting a working plane for the route path. Six options are available:
▪ Plan Plane
Defines the work surface as the XY plane at the depth of the active end. You also can
press CTRL+1 to select this option.

▪ Elevation Plane: East-West ( Z Plane: X-Axis)

Defines the work surface as the XZ plane. You also can press CTRL+2 to select this
option.
▪ Elevation Plane: North-South ( Z Plane: Y-Axis)
Defines the work surface as the YZ plane. You also can press CTRL+3 to select this
option.
▪ Plane by Turn/Branch
Defines the work surface as the plane defined by an existing turn or branch. You select
the turn or branch to set the plane. You also can press CTRL+4 to select this option.
▪ Plane by Three Points
Defines the work surface using three points that you define. You also can press
CTRL+5 to select this option.

Intergraph Smart® 3D Electrical User's Guide 137

 Route Conduit

▪ No Plane
Clears any work surfaces. The software does not project points that you place to any
plane. You also can press CTRL+6 to select this option.
Run
Displays the name of the conduit run with which the selected conduit is associated. You can
select another conduit run if necessary.
<New Conduit Run> displays the New Conduit Run dialog box. Use this option to create a
new conduit run.
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Conduit dialog box. Use this option to select a conduit run that is
associated with a different conduit system. For more information, see Select Conduit Dialog
Box (on page 157).
Type
Displays the short code associated with the selected conduit. The Type list also contains the
short codes associated with any other conduit defined in the specification for the current
nominal diameter. Selecting an entry from the Type list replaces the selected conduit with
one of a different type.
Option
Displays the option of the selected conduit. The Option list also contains any options
defined in the specification for the short code selected in the Type box. Selecting another
entry from the Option list updates the object accordingly.
Lock Length
Defines whether the length of the selected conduit should remain constant while moving.
When locked , the software automatically modifies the turn points, along with the length
and angle of adjacent straight features, to remain connected to the moved leg. The length of
the moved leg does not change.
When not locked , the software extends or shortens the associated legs to connect with
the new position of the moved conduit. The length of the moved leg can change. Any
component on the moved conduit maintains its relative position from the conduit ends.
Offset
Controls the SmartSketch offset constraint. Type the distance that you want to offset the
conduit that you are editing. Select <Disabled> if you do not want to use the offset
constraint. Select Set Offset Reference to define the reference point. For more information
on setting the reference point, see Set Offset Reference Dialog Box (Conduit) (on page
157).
Max Fill
Displays the percent maximum fill of the conduit straight feature. This button is enabled if
the conduit contains cable. You can click this button to depress it, and the software will
highlight the area with the maximum fill on the conduit in the model.

Intergraph Smart® 3D Electrical User's Guide 138

 Route Conduit

Edit Conduit Turn Feature Ribbon

Displays options for turns or bends placed in the model.
Properties
Displays the Conduit Turn Feature Properties dialog box. For more information, see
Conduit Turn Feature Properties Dialog Box (on page 168).
Move From
Click to specify the starting location of the move vector. If you do not define a starting point,
the software assumes that the current location of the object is the starting point.
Move To
Click to specify the ending location of the move vector.
Plane
Activates options for selecting a working plane for the route path. Six options are available:
▪ Plan Plane
Defines the work surface as the XY plane at the depth of the active end. You also can
press CTRL+1 to select this option.

▪ Elevation Plane: East-West ( Z Plane: X-Axis)

Defines the work surface as the XZ plane. You also can press CTRL+2 to select this
option.
▪ Elevation Plane: North-South ( Z Plane: Y-Axis)
Defines the work surface as the YZ plane. You also can press CTRL+3 to select this
option.
▪ Plane by Turn/Branch
Defines the work surface as the plane defined by an existing turn or branch. You select
the turn or branch to set the plane. You also can press CTRL+4 to select this option.
▪ Plane by Three Points
Defines the work surface using three points that you define. You also can press
CTRL+5 to select this option.
▪ No Plane
Clears any work surfaces. The software does not project points that you place to any
plane. You also can press CTRL+6 to select this option.
Run
Specifies the name of the conduit run with which the selected turn is associated. You can
select another run from the list if necessary.
<New Conduit Run> displays the New Conduit Run dialog box. Use this option to create a
new conduit run.
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not

Intergraph Smart® 3D Electrical User's Guide 139

 Route Conduit

available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Conduit dialog box. Use this option to select a conduit run that is
associated with a different conduit system. For more information, see Select Conduit Dialog
Box (on page 157).
Type
Displays the short code associated with the selected turn. The Type list also contains the
short codes associated with any other turns defined in the specification for the current
nominal diameter. Selecting an entry from the Type list replaces the selected turn with one
of a different type.
Option
Displays the option of the selected turn. The Option list also contains any options defined in
the piping specification for the short code selected in the Type box. Selecting another entry
from the Option list updates the object accordingly.

Angle Lock
Locks or unlocks the Angle box. Locking the corresponding angle value creates a constraint
along which the selected turn angle can be moved.
Angle 2
Specifies the angle of the turn feature located at the end of one associated leg. If this box is
blank, there is no turn feature located at the end of the leg. Although this value can be
changed, the location of the corresponding turn cannot. Modification of this value repositions
the selected turn until the specified angle is achieved.
Angle 1
Specifies the angle of the turn that you are editing. Modification of this value repositions the
selected turn until the specified angle is achieved.
Angle 3
Specifies the angle of the turn feature located at the end of one associated leg. If this box is
blank, there is no turn feature located at the end of the leg. Although this value can be
changed, the location of the corresponding turn cannot. Modification of this value repositions
the selected turn until the specified angle is achieved.
Offset
Controls the SmartSketch offset constraint. Type the distance that you want to offset the
conduit that you are routing. Select <Disabled> if you do not want to use the offset
constraint. Select Set Offset Reference to define the reference point. For more information
on setting the reference point, see Set Offset Reference Dialog Box (Conduit) (on page
157).

What do you want to do?

▪ Create new conduit (on page 141)
▪ Route using an existing conduit run (on page 143)
▪ Add conduits to a duct bank (on page 143)
▪ Delete conduit from duct bank (on page 51)

Intergraph Smart® 3D Electrical User's Guide 140

 Route Conduit

▪ Connect conduit end features (on page 143)

▪ Place components while routing conduit (on page 144)
▪ Route conduit with an external offset (on page 146)
▪ Copy a conduit run (on page 149)
▪ Extend an existing conduit run (on page 149)
▪ Move a conduit run (on page 38)
▪ Move a conduit branch (on page 43)

Create new conduit

1. Click Route Conduit .
2. Select a starting point in the graphic view for the new conduit.

If you select a feature located at the end of an existing run, the software continues
the run of the selected feature. Skip to step 5.
The New Conduit Run dialog box displays. For more information, see New Conduit Run
Dialog Box (on page 153).
3. Select the system for the conduit in the System box.
The System box lists up to the last ten selected systems. Choose More... to browse
all applicable systems in the workspace and model database.
4. In the Name box, type the name of the conduit that you are creating. If you do not enter a
name, the software automatically generates a name.
You can choose a naming rule in the Name Rule box, if necessary.
5. If necessary, change the specification of the new conduit in the Specification box.
6. If necessary, select a diameter in the Nominal Conduit Diameter box.
Use the Category option to view more properties that you can set for the conduit.
7. Click OK to return to the Route Conduit command.
8. On the ribbon, click Plane and select your working surface.

Intergraph Smart® 3D Electrical User's Guide 141

 Route Conduit

Plane Ribbon Options

▪ Plan Plane - Defines the work surface as the XY plane at the depth of the active
end. You also can press CTRL+1 to select this option.

▪ Elevation Plane: East-West - Defines the work surface as the XZ plane. You also
can press CTRL+2 to select this option.
▪ Elevation Plane: North-South - Defines the work surface as the YZ plane. You also
can press CTRL+3 to select this option.
▪ Plane by Turn/Branch - Defines the work surface as the plane defined by an
existing turn or branch. You select the turn or branch to set the plane. You also can
press CTRL+4 to select this option.
▪ Plane by Three Points - Defines the work surface using three points that you define.
You also can press CTRL+5 to select this option.
▪ No Plane - Clears any work surfaces. The software does not project points that you
place to any plane. You also can press CTRL+6 to select this option.
1. Click in the graphic view to route the conduit.
You can use PinPoint, Point Along, and the SmartSketch3D relationship indicators
when defining your conduit.

2. Right-click to end routing the conduit.

Using the Angle and Length constraints, you can lock these parameters while
routing a conduit.

Intergraph Smart® 3D Electrical User's Guide 142

 Route Conduit

Route using an existing conduit run

1. Click Route Conduit on the vertical toolbar.
2. Select an existing conduit run from the Run box, on the ribbon.
If you select a feature located at the end of an existing run, the software continues
the run of the selected feature. Skip to step 3.
3. Select points to define the route of the conduit.
You can use PinPoint, Point Along, and the SmartSketch3D relationship indicators
when defining the conduit run.
4. Select the ending point of the conduit.
5. Continue routing or right-click to end routing the conduit.

Add conduits to a duct bank

To add conduits to a duct bank, you need to manually route the conduits using tools such as the
offset command assistant to position a conduit into the duct bank's encasement. For more
information, see Route conduit with an external offset (on page 146).
If there is not sufficient space, the cross section of the duct bank must be increased as needed
and the encasement and other conduits should be manually jogged to maintain the relative
positioning. Change the size of the duct bank by selecting all the features of the entire duct bank
and then changing their values on the ribbon.
The relation between the conduit run and the duct bank must be manually established or
removed.

Connect conduit end features

Smart 3D enables you to connect end features of existing conduits using the zero-spec
cableway. You can then route cables to pass through the resulting cableway. You can manually
connect conduit end features, or you can use the Auto Connect Cableway command on the
drawing toolbar.

Using Auto Connect

1. Locate the conduits you want to connect in creating your route.

2. Click Auto Connect .

3. From the Auto Connect Cableway ribbon, select Conduit End Features from the filter
pull-down menu.
4. Select the conduit end feature in the graphic view to begin the connection.

5. Click Select to Runs on the Auto Connect Cableway ribbon, and then select the end
feature of the conduit to which you want to connect.
6. Click Finish.
The new Cws-0 cableway is automatically calculated and placed.

Intergraph Smart® 3D Electrical User's Guide 143

 Route Conduit

Connecting Manually
1. Locate the conduits you want to connect in creating your route.

2. Click Route Cableway .

3. In the graphic view, select the conduit end feature you want as the starting point.
If you selected an end feature before selecting the Route Cableway command,
that feature is the default starting point for the new cableway.
4. On the New Cableway Dialog Box (on page 103), set Specifications to Cws-0.
5. Set other required cableway properties, and then click OK.
6. Select conduit end feature in the graphic view to define the endpoint of the connecting
cableway.

Place components while routing conduit

1. Click Route Conduit .
2. Select the run starting point.
If you selected an end feature of an existing run, the software continues that run.
Skip to step 5.
The New Conduit Run dialog box displays. For more information, see New Conduit Run
Dialog Box (on page 153).
3. Select the system for the conduit in the System box.
The System box lists up to the last ten selected systems. Choose More... to browse
all applicable systems in the workspace and model database.
4. In the Name box, type the name of the conduit that you are creating. If you do not enter a
name, the software automatically generates a name.
You can choose a naming rule in the Name Rule box, if necessary.
5. If necessary, change the specification of the new conduit in the Specification box.
6. If necessary, select a diameter in the Nominal Conduit Diameter box.
Use the Category option to view more properties that you can set for the conduit.
Click OK to return to the Route Conduit command.

Intergraph Smart® 3D Electrical User's Guide 144

 Route Conduit

7. Click in the graphic view to begin routing the conduit.

8. Click Insert Component when you want to insert a component.

9. On the ribbon, select the component type.

10. Click Finish.

11. Continue routing the conduit.

You can continue routing an existing run by selecting a run end feature or by
selecting the run name from the list of available runs.

Intergraph Smart® 3D Electrical User's Guide 145

 Route Conduit

Route conduit with an external offset

1. Click Route Conduit .
2. Select the run starting point.

3. Define the conduit properties on the New Conduit Run dialog box (on page 153), and then
click OK.
4. Route towards the object you want to offset from.

5. From the Offset option, select Set Offset Reference.

Intergraph Smart® 3D Electrical User's Guide 146

 Route Conduit

6. Select External from the Offset Reference Type grouping.

7. On the Set Offset Reference dialog box, select the option to use from the Measured from
field.
8. Type the offset distance to use in the Offset box.
9. Click OK on the Set Offset Reference dialog box.
10. Move the pointer over the object in the model from which you want to measure the offset
until the object is added to the SmartSketch3D locate list.

11. Move the pointer until the offset glyph appears, and then click to route the run.
12. Select the ending point of the run. Right-click to end a run that does not terminate in a
nozzle or branch.

Intergraph Smart® 3D Electrical User's Guide 147

 Route Conduit

Route conduit with a cardinal point offset

1. Click Route Conduit .
2. Select the run starting point.

3. Define the conduit properties on the New Conduit Run dialog box (on page 153), and then
click OK.
4. Route towards the object that you want to offset from.

5. From the Offset option, select Set Offset Reference.

6. Select Cardinal Point from the Offset Reference Type grouping.

7. Select a cardinal point on the illustration.
8. Click OK on the Set Offset Reference dialog box.

Intergraph Smart® 3D Electrical User's Guide 148

 Route Conduit

9. Select the appropriate route plane.

10. Click in the model to route the run.
11. Select the ending point of the run. Right-click to end a run that does not terminate in a
nozzle or branch.

Copy a conduit run

1. Click Select .
2. Select Conduit Runs in the Locate Filter box.
3. Select the conduit run to copy.
4. Click Edit > Copy.
5. Select a reference point in the model.
6. Click Edit > Paste.
If you selected Paste in Place, then select Move from the main ribbon, and
identify a location in the model for the conduit run.
If you position an end of the copied conduit run so that it touches a conduit run end or
nozzle, the software automatically connects the two.

Extend an existing conduit run

1. Click Route Conduit .
2. Select the end feature from which to extend the conduit run.

3. Route the conduit run as needed.

Intergraph Smart® 3D Electrical User's Guide 149

 Route Conduit

Conduit Settings Dialog Box

Sets options for a conduit run while you are routing.
See Also
General Tab (Conduit Settings Dialog Box) (on page 150)
Defaults Tab (Conduit Settings Dialog Box) (on page 153)

General Tab (Conduit Settings Dialog Box)

Displays the general properties of the conduit that you are routing.
Because conduit run properties are customizable in the reference data, only the
properties that are required by the software are documented.
Conduit properties are divided into several different categories: Standard, Surface Treatment
and Coating, Cable Fill, and Responsibility. You select which category that you want to define
values for by using the Category option.

Standard
System
Displays or defines the system for the conduit. The last system that you selected is the
default. Select More to display all defined systems. You can create a new system in the
Systems and Specifications task.
Conduit Run
Displays or defines the name of the conduit that you are creating.
Specification
Displays or defines the specification for the conduit. Specifications are assigned to systems
in the Systems and Specifications task. Only those specifications that are allowed in the
system that you selected appear. You define specifications in the reference data. See the
Electrical Reference Data Guide for more information on defining specifications.
Nominal Conduit Diameter
Displays or defines the conduit diameter. The specification controls the available NPDs in
this list. Select the nominal pipe diameter (NPD) that you want to use for this run. If you
select a nozzle as the starting point of your conduit run, the software automatically uses the
NPD of the nozzle as the NPD of the conduit run.

Surface Treatment and Coating

Interior Surface Treatment
Select the interior surface treatment for the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Interior Surface Treatment sheet in the
AllCodeLists.xls workbook in the reference data.
Exterior Surface Treatment
Select the exterior surface treatment for the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Exterior Surface Treatment sheet in the
AllCodeLists.xls workbook in the reference data.

Intergraph Smart® 3D Electrical User's Guide 150

 Route Conduit

Cleaning Requirement
Select the cleaning requirement for the conduit. If you want to add, edit, or remove values
that are available for selection, edit the Cleaning Requirement sheet in the
AllCodeLists.xls workbook in the reference data.
Steamout Requirement
Select the steamout requirement for the conduit. If you want to add, edit, or remove values
that are available for selection, edit the Steamout Requirement sheet in the
AllCodeLists.xls workbook in the reference data.
Steamout Pressure
Specify the steamout pressure for the conduit. Include the pressure unit of measure, psi for
pounds per square inch for example, when specifying this value.
Steamout Temperature
Specify the steamout temperature for the conduit. Include the temperature unit of measure,
K for Kelvin, F for Fahrenheit, or C for Celsius for example, when specifying this value.
Interior Coating Requirement
Select the coating requirement of the interior coating for the conduit. If you want to add, edit,
or remove values that are available for selection, edit the Coating Type sheet in the
AllCodeLists.xls workbook in the reference data.
Interior Coating Type
Select the type of interior coating for the conduit. If you want to add, edit, or remove values
that are available for selection, edit the Coating Type sheet in the AllCodeLists.xls
workbook in the reference data.
Interior Coating Area
Enter the total area that the interior coating covers.
Exterior Coating Requirement
Select the coating requirement of the exterior coating for the conduit. If you want to add,
edit, or remove values that are available for selection, edit the Coating Type sheet in the
AllCodeLists.xls workbook in the reference data.
Exterior Coating Type
Select the type of exterior coating for the conduit. If you want to add, edit, or remove values
that are available for selection, edit the Coating Type sheet in the AllCodeLists.xls
workbook in the reference data.
Exterior Coating Area
Enter the total area that the exterior coating covers.
Coating Color
Select the color of the conduit coating. If you want to add, edit, or remove values that are
available for selection, edit the Coating Color sheet in the AllCodeLists.xls workbook in
the reference data.

Intergraph Smart® 3D Electrical User's Guide 151

 Route Conduit

Cable Fill
Fill Efficiency
Displays or defines the efficiency of the stacking of cables in the conduit. You can enter a
real number, integer, or percent; for example, type 0.9, 90, or 90%.
Signal Type
Displays or defines the cable usage, which is used in tray fill calculations. If you want to add,
edit, or remove values that are available for selection, edit the Signal Type sheet in the
AllCodeLists.xls workbook in the reference data.
Voltage Grade
Displays or defines the voltage grade, which is used in determining the range of voltage that
the conduit can carry. If you want to add, edit, or remove values that are available for
selection, edit the Voltage Grade sheet in the AllCodeLists.xls workbook in the reference
data.

Responsibility
Cleaning Responsibility
Select the party responsible for cleaning the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Cleaning Responsibility select list in the
Catalog task.
Design Responsibility
Select the party responsible for designing the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Design Responsibility select list in the
Catalog task.
Fabrication Responsibility
Select the party responsible for fabricating the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Fabrication Responsibility select list in the
Catalog task.
Installation Responsibility
Select the party responsible for installing the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Installation Responsibility select list in the
Catalog task.
Painting Responsibility
Select the party responsible for painting the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Painting Responsibility select list in the
Catalog task.
Requisition Responsibility
Select the party responsible for ordering the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Requisition Responsibility select list in the
Catalog task.

Intergraph Smart® 3D Electrical User's Guide 152

 Route Conduit

Supply Responsibility
Select the party responsible for delivering the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Supply Responsibility select list in the
Catalog task.
Testing Responsibility
Select the party responsible for testing the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Testing Responsibility select list in the
Catalog task.

Defaults Tab (Conduit Settings Dialog Box)

Displays the default properties of the conduit that you are routing.
Automatic Angle Lock On
Specifies if the Angle lock should automatically lock when you type a new angle value into
the Angle box.
Remember Working Plane
Allows you to choose whether the software remembers the last used working plane. False
clears the last selected plane so that you must reset the plane each time that you begin
routing. True remembers the last used working plane. The software then remembers your
selection and locks each route onto the plane. The default option is False.
When Remember Working Plane is set to False, the default plane option for Route
Conduit is No Plane. Each time that you click a routing command, the system clears
the last selected Plane option. You must reset the plane option each time that you begin a
route.
However, you can set the default behavior to remember the last used working plane by
setting Remember Working Plane to True. The software then locks the route onto the
plane that you are using and remembers your selection within that session only.
This option is available when you are routing duct, piping, cableways, and
conduits. Setting this option to True when you are in any of these tasks results in an
automatic True setting for all tasks. Likewise, setting this option to False when you are in
any of these tasks results in an automatic False setting for all tasks.

New Conduit Run Dialog Box

Creates a new conduit run in your model using properties that you specify. You can access the
New Conduit Run dialog box by going to the Electrical task, selecting the Route Conduit
command, and then selecting <New Conduit Run> from the Run option on the ribbon.

Standard
System
Displays or defines the system for the conduit. The last system that you selected is the
default. Select More to display all defined systems. You can create a new system in the
Systems and Specifications task.

Intergraph Smart® 3D Electrical User's Guide 153

 Route Conduit

Name
Displays or defines the name of the conduit that you are creating. The name is based on the
Name Rule selection. If you want to type a new name for the run, in the Name Rule box,
select User Defined, and then type a name for the run in the Name box.
Name Rule
Specify the naming rule that you want to use to name this run. You can select one of the
listed rules or select User Defined to specify the run name yourself in the Name box.
Specification
Displays or defines the specification for the conduit. Specifications are assigned to systems
in the Systems and Specifications task. Only those specifications that are allowed in the
system that you selected appear. You define specifications in the reference data.
For more information on defining specifications, see the Electrical Reference Data Guide,
available from the Help > Printable Guides command in the software.
Nominal Conduit Diameter
Defines the nominal diameter of a conduit.

Surface Treatment and Coating

Interior Surface Treatment Requirement
Select the interior treatment requirement for the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Interior Surface Treatment select list in the
Catalog task.
Interior Surface Treatment Type
Select the interior treatment type for the conduit. If you want to add, edit, or remove values
that are available for selection, edit the Interior Surface Treatment select list in the Catalog
task.
Exterior Surface Treatment Requirement
Select the exterior treatment requirement for the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Exterior Surface Treatment select list in the
Catalog task.
Exterior Surface Treatment Type
Select the exterior treatment type for the conduit. If you want to add, edit, or remove values
that are available for selection, edit the Exterior Surface Treatment select list in the
Catalog task.
Cleaning Requirement
Select the cleaning requirement for the conduit. If you want to add, edit, or remove values
that are available for selection, edit the Cleaning Requirement select list in the Catalog
task.
Steamout Requirement
Select the steam out requirement for the conduit. If you want to add, edit, or remove values
that are available for selection, edit the Steamout Requirement select list in the Catalog
task.

Intergraph Smart® 3D Electrical User's Guide 154

 Route Conduit

Steamout Pressure
Specify the steamout pressure for the conduit. Include the pressure unit of measure, psi for
pounds per square inch for example, when specifying this value.
Steamout Temperature
Specify the steamout temperature for the conduit. Include the temperature unit of measure,
K for Kelvin, F for Fahrenheit, or C for Celsius for example, when specifying this value.
Auxiliary Treatment Requirement
Specify any auxiliary treatment requirement.
Auxiliary Treatment Type
Specify any auxiliary treatment type.
Interior Coating Requirement
Select the interior coating requirement for the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Coating Type select list in the Catalog task.
Interior Coating Type
Select the interior coating type for the conduit. If you want to add, edit, or remove values that
are available for selection, edit the Coating Type select list in the Catalog task.
Interior Coating Area
Enter the total area that the coating covers.
Exterior Coating Requirement
Select the exterior coating requirement for the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Coating Type select list in the Catalog task.
Exterior Coating Type
Select the exterior coating type for the conduit. If you want to add, edit, or remove values
that are available for selection, edit the Coating Type select list in the Catalog task.
Coating Color
Select the color of the conduit coating. If you want to add, edit, or remove values that are
available for selection, edit the Coating Color select list in the Catalog task.
Exterior Coating Area
Enter the total area that the coating covers.

Cable Fill
Fill Efficiency
Displays or defines the efficiency of the stacking of cables in the conduit. You can enter a
real number, integer, or percent; for example, type 0.9, 90, or 90%.
Signal Type
Displays or defines the cable usage, which is used in tray fill calculations. If you want to add,
edit, or remove values that are available for selection, edit the Signal Type sheet in the
AllCodeLists.xls workbook in the reference data.

Intergraph Smart® 3D Electrical User's Guide 155

 Route Conduit

Voltage Grade
Displays or defines the voltage grade, which is used in determining the range of voltage that
the conduit can carry. If you want to add, edit, or remove values that are available for
selection, edit the Voltage Grade sheet in the AllCodeLists.xls workbook in the reference
data.

Responsibility
Cleaning Responsibility
Select the party responsible for cleaning the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Cleaning Responsibility select list in the
Catalog task.
Design Responsibility
Select the party responsible for designing the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Design Responsibility select list in the
Catalog task.
Fabrication Responsibility
Select the party responsible for fabricating the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Fabrication Responsibility select list in the
Catalog task.
Installation Responsibility
Select the party responsible for installing the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Installation Responsibility select list in the
Catalog task.
Painting Responsibility
Select the party responsible for painting the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Painting Responsibility select list in the
Catalog task.
Requisition Responsibility
Select the party responsible for ordering the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Requisition Responsibility select list in the
Catalog task.
Supply Responsibility
Select the party responsible for delivering the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Supply Responsibility select list in the
Catalog task.
Testing Responsibility
Select the party responsible for testing the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Testing Responsibility select list in the
Catalog task.

Intergraph Smart® 3D Electrical User's Guide 156

 Route Conduit

Select Conduit Dialog Box

Displays all the conduits so that you can select the conduit that you want. Select a conduit from
the hierarchy, and then click OK.
Look In options are currently only available for Quick Route .
Look In
Specifies the location in which you want to look for the conduit.
▪ Workspace - Displays all conduits placed in the defined workspace only.
▪ Database - Displays all the conduits available in the entire model database.

Set Offset Reference Dialog Box (Conduit)

Sets options for reference offsets while routing conduit. For more information, see Route conduit
with an external offset (on page 146).
Offset Reference Type
Select the offset type you want to use.
▪ External - Routes a conduit a specified distance from another object, such as another
conduit running parallel to the one you are placing.
▪ Cardinal Point - Routes a conduit by the top, sides, bottom, or invert elevation of the
conduit instead of the conduit centerline. You must use Tools > PinPoint and lock the
plane when using this reference type. For example, if you are routing the conduit by the
invert elevation cardinal point, you must lock the elevation plane at the invert elevation
you want to use.
If the referenced object is a planar surface (such as a slab or deck), then the offset distance
is measured from the surface to the selected reference plane (for example, the Elevation
Plane: East-West (Z Plane: X-axis ) on which the conduit is being routed.
If the referenced object is a linear element (such as a structural beam), then the offset
distance is measured from the line to the selected reference plane on which the conduit is

Intergraph Smart® 3D Electrical User's Guide 157

 Route Conduit

being routed.

Offset
Specifies the offset distance. Type the distance that you want to offset. You can turn off the
offset option by selecting <Disabled>.
Measured From
Select the object from which you want to measure the offset. You can select from:
▪ Centerline - Select this option if you want to measure the offset from the centerline of a
conduit run.
▪ Conduit surface - Select this option if you want to measure the offset from the outside
surface of a conduit run.
▪ Largest surface (flange) - Select this option if you want to measure from the object that
has the greatest diameter on the conduit run. The object could be the conduit surface or
a conduit part.
▪ Staggered - Select this option to measure from the largest object on the conduit that
you are routing to the largest surface on the conduit that you are referencing. Use this
option when you want to get conduit centerlines as close as possible.

Intergraph Smart® 3D Electrical User's Guide 158

 Route Conduit

Conduit Branch Feature Properties Dialog Box

Displays branch properties for review and editing.
See Also
Configuration Tab (on page 290)
Relationships Tab (on page 300)
Edit Conduit Branch Feature Properties (on page 57)
General Tab (Conduit Branch Feature Properties Dialog Box) (on page 159)

General Tab (Conduit Branch Feature Properties Dialog Box)

Displays and defines the general properties of the selected conduit branch feature.

Standard
System
Displays the system to which the branch feature belongs. You cannot change the system of
the branch feature.
Conduit Run
Specifies the conduit run to which the branch feature belongs.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Conduit dialog box. Use this option to select a conduit run that is
associated with a different conduit system. For more information, see Select Conduit Dialog
Box (on page 157).
Specification
Specify the active conduit specification for the branch feature. All conduit specifications that
are allowed for the system parent of the conduit run display for selection. If appears in
the box, the conduit specification is inherited from the conduit run to which the branch
feature belongs. If the icon does not appear and you want to use the conduit specification
from the run, select Use Run Specification.
Nominal Conduit Diameter

Specifies the nominal diameter (NCD) of the object. If displays in the box, the NCD for
the object is inherited from the parent object to which the object belongs. If the icon does not
display, and you need to use the parent object specification from the parent object run,
select Use Run NCD. If you have manually selected the part, the NCD of the selected part
displays, and you cannot change it.
Type
Displays the types of branch features allowed by the selected Specification and Nominal
Conduit Diameter. Branch features are listed by short codes. You can change the branch
feature type if needed. If you have manually selected the part, this box displays Part
selected manually and cannot be changed.

Intergraph Smart® 3D Electrical User's Guide 159

 Route Conduit

Option
Displays a list of available branch features. The software generates this list based on the
conduit specification, the NCD, and the short code that you selected in the Type box. If you
have manually selected the part, this box displays Part selected manually and cannot be
changed.
Base Part Name
Displays the part name for the branch feature. The software selects the part number using
the conduit specification guidelines. Click Select Manually to override the conduit
specification, and select the part number from the catalog. If you select a part manually, the
Nominal Conduit Diameter, Type and Option properties are disabled.

Fill Information
Percent Fill
Displays or defines the percent cable fill in the conduit feature.

Conduit Component Properties Dialog Box

Displays conduit component properties for review and editing.
See Also
General Tab (Conduit Component Properties Dialog Box) (on page 160)
Configuration Tab (on page 290)
Relationships Tab (on page 300)
Notes Tab (on page 299)
Connections Tab (on page 292)
Edit Component Properties (on page 195)

General Tab (Conduit Component Properties Dialog Box)

Displays and defines the general properties of the conduit component.

Standard
System
Displays the system to which the conduit component belongs. You cannot change the
system of the conduit component.
Conduit Run
Specifies the conduit run to which the conduit component belongs.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Conduit dialog box. Use this option to select a conduit run that is
associated with a different conduit system. For more information, see Select Conduit Dialog
Box (on page 157).

Intergraph Smart® 3D Electrical User's Guide 160

 Route Conduit

Specification
Specify the active conduit specification for the conduit component. All conduit specifications
that are allowed for the system parent of the conduit run display for selection. If appears
in the box, the conduit specification is inherited from the conduit run to which the component
belongs. If the icon does not appear, and you want to use the conduit specification from the
run, select Use Run Specification.
Nominal Conduit Diameter

Specify the nominal diameter (NCD) of the conduit component. If appears in the box,
the NCD for the conduit component is inherited from the conduit run to which the conduit
component belongs. If the icon does not appear, and you want to use the conduit
specification from the conduit run, select Use Run NCD. If you have manually selected the
part, the NCD of the selected part appears and cannot be changed.
Type
Displays the types of conduit components allowed by the selected Specification and
Nominal Conduit Diameter. Conduit components are listed by short codes. You can
change the conduit component type if needed. If you have manually selected the part, this
box displays Part selected manually and cannot be changed.
Option
Displays a list of available conduit components. The software generates this list based on
the conduit specification, the NCD, and the short code that you selected in the Type box. If
you have manually selected the part, this box displays Part selected manually and cannot
be changed.
Base Part Name
Displays the part name for the conduit component. The software selects the part number
using the conduit specification guidelines. Click Select Manually to override the conduit
specification, and select the part number from the catalog. If you select a part manually, the
Nominal Conduit Diameter, Type and Option properties are disabled.

Fill Information
Percent Fill
Displays or defines the percent cable fill in the conduit component.

Intergraph Smart® 3D Electrical User's Guide 161

 Route Conduit

Conduit End Feature Properties Dialog Box

Sets options for a conduit end feature that you have selected.
See Also
Configuration Tab (on page 290)
Edit Conduit End Feature Properties (on page 58)
General Tab (Conduit End Feature Properties Dialog Box) (on page 162)
Relationships Tab (on page 300)

General Tab (Conduit End Feature Properties Dialog Box)

Displays and defines the general properties of the selected conduit end feature.

Standard
System
Displays the system to which the end feature belongs. You cannot change the system of the
end feature.
Conduit Run
Displays the conduit run to which the end feature belongs.
Specification
Displays the active conduit specification for the end feature.
Nominal Conduit Diameter

Displays the nominal diameter (NCD) of the end feature. If appears in the box, the NCD
for the end feature is inherited from the conduit run to which the end feature belongs.
Type
Displays the types of end features allowed by the selected Specification and Nominal
Conduit Diameter. End features are listed by short codes. You can change the end feature
type if needed. If you have manually selected the part, this box displays Part selected
manually and cannot be changed.
Option
Displays a list of available end features. The software generates this list based on the
conduit specification, the NCD, and the short code that you selected in the Type box. If you
have manually selected the part, this box displays Part selected manually and cannot be
changed.
Base Part Name
The property does not apply to end features.

Intergraph Smart® 3D Electrical User's Guide 162

 Route Conduit

Conduit Part Properties Dialog Box

Displays conduit part properties for review and editing.
Connections Tab (on page 292)
Relationships Tab (on page 300)
Configuration Tab (on page 290)
Notes Tab (on page 299)

Conduit Run Properties Dialog Box

Displays conduit run properties for review and editing.
See Also
Edit Conduit Run Properties (on page 57)

General Tab (Conduit Run Properties Dialog Box)

Displays and defines the general properties of the selected conduit.
Because conduit run properties are customizable in the reference data, only the
properties that are required by the software are documented.
Conduit run properties are divided into several different categories: Standard, Surface
Treatment and Coating, Cable Fill, and Responsibility. You select which category that you
want to define values for by using the Category option.

Standard
System
Displays or defines the system for the conduit. The last system that you selected is the
default. Select More to display all defined systems. You can create a new system in the
Systems and Specifications task.
Name
Displays or defines the name of the conduit that you are creating. The name is based on the
Name Rule selection. If you want to type a new name for the run, in the Name Rule box,
select User Defined, and then type a name for the run in the Name box.
Name Rule
Specify the naming rule that you want to use to name this run. You can select one of the
listed rules or select User Defined to specify the run name yourself in the Name box.
Specification
Displays or defines the specification for the conduit. Specifications are assigned to systems
in the Systems and Specifications task. Only those specifications that are allowed in the
system that you selected appear. You define specifications in the reference data.
Nominal Conduit Diameter
Displays or defines the conduit diameter. The specification controls the available NPDs in
this list. Select the nominal pipe diameter (NPD) that you want to use for this run. If you
select a nozzle as the starting point of your conduit run, the software automatically uses the
NPD of the nozzle as the NPD of the conduit run.

Intergraph Smart® 3D Electrical User's Guide 163

 Route Conduit

Surface Treatment and Coating

Interior Surface Treatment Type
Select the type of interior surface treatment for the conduit. If you want to add, edit, or
remove values that are available for selection, edit the Interior Surface Treatment sheet in
the AllCodeLists.xls workbook in the reference data.
Interior Surface Treatment Requirement
Select the interior surface treatment requirement for the conduit. If you want to add, edit, or
remove values that are available for selection, edit the Interior Surface Treatment sheet in
the AllCodeLists.xls workbook in the reference data.
Exterior Surface Treatment Type
Select the type of exterior surface treatment for the conduit. If you want to add, edit, or
remove values that are available for selection, edit the Exterior Surface Treatment sheet in
the AllCodeLists.xls workbook in the reference data.
Exterior Surface Treatment Requirement
Select the exterior surface treatment requirement for the conduit. If you want to add, edit, or
remove values that are available for selection, edit the Exterior Surface Treatment sheet in
the AllCodeLists.xls workbook in the reference data.
Cleaning Requirement
Select the cleaning requirement for the conduit. If you want to add, edit, or remove values
that are available for selection, edit the Cleaning Requirement sheet in the
AllCodeLists.xls workbook in the reference data.
Steamout Requirement
Select the steamout requirement for the conduit. If you want to add, edit, or remove values
that are available for selection, edit the Steamout Requirement sheet in the
AllCodeLists.xls workbook in the reference data.
Steamout Pressure
Specify the steamout pressure for the conduit. Include the pressure unit of measure, psi for
pounds per square inch for example, when specifying this value.
Steamout Temperature
Specify the steamout temperature for the conduit. Include the temperature unit of measure,
K for Kelvin, F for Fahrenheit, or C for Celsius for example, when specifying this value.
Interior Coating Requirement
Select the coating requirement of the interior coating for the conduit. If you want to add, edit,
or remove values that are available for selection, edit the Coating Type sheet in the
AllCodeLists.xls workbook in the reference data.
Interior Coating Type
Select the type of interior coating for the conduit. If you want to add, edit, or remove values
that are available for selection, edit the Coating Type sheet in the AllCodeLists.xls
workbook in the reference data.
Interior Coating Area
Enter the total area that the interior coating covers.

Intergraph Smart® 3D Electrical User's Guide 164

 Route Conduit

Exterior Coating Requirement

Select the coating requirement of the exterior coating for the conduit. If you want to add,
edit, or remove values that are available for selection, edit the Coating Type sheet in the
AllCodeLists.xls workbook in the reference data.
Exterior Coating Type
Select the type of exterior coating for the conduit. If you want to add, edit, or remove values
that are available for selection, edit the Coating Type sheet in the AllCodeLists.xls
workbook in the reference data.
Exterior Coating Area
Enter the total area that the exterior coating covers.
Coating Color
Select the color of the conduit coating. If you want to add, edit, or remove values that are
available for selection, edit the Coating Color sheet in the AllCodeLists.xls workbook in
the reference data.

Cable Fill
Fill Efficiency
Displays or defines the efficiency of the stacking of cables in the conduit. You can enter a
real number, integer, or percent; for example, type 0.9, 90, or 90%.
Signal Type
Displays or defines the cable usage, which is used in tray fill calculations. If you want to add,
edit, or remove values that are available for selection, edit the Signal Type sheet in the
AllCodeLists.xls workbook in the reference data.
Voltage Grade
Displays or defines the voltage grade, which is used in determining the range of voltage that
the conduit can carry. If you want to add, edit, or remove values that are available for
selection, edit the Voltage Grade sheet in the AllCodeLists.xls workbook in the reference
data.

Responsibility
Cleaning Responsibility
Select the party responsible for cleaning the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Cleaning Responsibility select list in the
Catalog task.
Design Responsibility
Select the party responsible for designing the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Design Responsibility select list in the
Catalog task.
Fabrication Responsibility
Select the party responsible for fabricating the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Fabrication Responsibility select list in the
Catalog task.

Intergraph Smart® 3D Electrical User's Guide 165

 Route Conduit

Installation Responsibility
Select the party responsible for installing the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Installation Responsibility select list in the
Catalog task.
Painting Responsibility
Select the party responsible for painting the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Painting Responsibility select list in the
Catalog task.
Requisition Responsibility
Select the party responsible for ordering the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Requisition Responsibility select list in the
Catalog task.
Supply Responsibility
Select the party responsible for delivering the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Supply Responsibility select list in the
Catalog task.
Testing Responsibility
Select the party responsible for testing the conduit. If you want to add, edit, or remove
values that are available for selection, edit the Testing Responsibility select list in the
Catalog task.

Conduit Straight Feature Properties Dialog Box

Displays straight feature properties for review and editing.
See Also
Configuration Tab (on page 290)
Relationships Tab (on page 300)
Edit Conduit Straight Feature Properties (on page 57)
General Tab (Cableway Straight Feature Properties Dialog Box) (on page 120)
General Tab (Conduit Straight Feature Properties Dialog Box) (on page 166)

General Tab (Conduit Straight Feature Properties Dialog

Box)
Displays and defines the general properties of the selected conduit straight feature.

Standard
System
Displays the system to which the straight feature belongs. You cannot change the system of
the straight feature.
Conduit Run
Specifies the conduit run to which the straight feature belongs. You can select another run if
necessary.

Intergraph Smart® 3D Electrical User's Guide 166

 Route Conduit

<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Conduit dialog box. Use this option to select a conduit run that is
associated with a different conduit system. For more information, see Select Conduit Dialog
Box (on page 157).
Specification
Specify the active conduit specification for the straight feature. All conduit specifications that
are allowed for the system parent of the conduit run display for selection. If appears in
the box, the conduit specification is inherited from the conduit run to which the straight
feature belongs. If the icon does not appear and you want to use the conduit specification
from the conduit run, select Use Run Specification.
Nominal Conduit Diameter

Specify the nominal diameter (NCD) of the straight feature. If displays in the box, the
NCD for the straight feature is inherited from the conduit run to which the straight feature
belongs. If the icon does not display, and you want to use the conduit specification from the
conduit run, select Use Run NCD. If you have manually selected the part, the NCD of the
selected part displays and you cannot change it.
Type
Specifies the types of straight features allowed by the selected Specification and Nominal
Conduit Diameter. Straight features are listed by short codes. You can change the straight
feature type if needed. If you have manually selected the part, this box displays Part
selected manually and cannot be changed.
Option
Displays a list of available straight features. The software generates this list based on the
conduit specification, the NCD, and the short code that you selected in the Type box. If you
have manually selected the part, this box displays Part selected manually and cannot be
changed.
Base Part Name
Displays the part name for the straight feature. The software selects the part number using
the conduit specification guidelines. Click Select Manually to override the conduit
specification, and select the part number from the catalog. If you select a part manually, the
Nominal Conduit Diameter, Type and Option properties are disabled.
Length
Displays the length of the straight feature. You cannot change the length of the straight
feature.

Fill Information
Percent Fill
Displays or defines the percent cable fill in the conduit feature.

Intergraph Smart® 3D Electrical User's Guide 167

 Route Conduit

Conduit Turn Feature Properties Dialog Box

Displays turn feature properties for review and editing.
See Also
Configuration Tab (on page 290)
Relationships Tab (on page 300)
Edit Conduit Turn Feature Properties (on page 57)
General Tab (Cableway Turn Feature Properties Dialog Box) (on page 125)
General Tab (Conduit Turn Feature Properties Dialog Box) (on page 168)

General Tab (Conduit Turn Feature Properties Dialog Box)

Displays and defines the general properties of the selected conduit turn feature.

Standard
System
Displays the system to which the turn feature belongs. You cannot change the system of the
turn feature.
Conduit Run
Specifies the conduit run to which the turn feature belongs. You can select another run if
necessary.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Conduit dialog box. Use this option to select a conduit run that is
associated with a different conduit system. For more information, see Select Conduit Dialog
Box (on page 157).
Specification
Specify the active conduit specification for the turn feature. All conduit specifications that are
allowed for the system parent of the conduit run display for selection. If appears in the
box, the conduit specification is inherited from the conduit run to which the turn feature
belongs. If the icon does not appear and you want to use the conduit specification from the
conduit run, select Use Run Specification.
Nominal Conduit Diameter

Specify the nominal diameter (NCD) of the turn feature. If appears in the box, the NCD
for the turn feature is inherited from the conduit run to which the turn feature belongs. If the
icon does not appear, and you want to use the conduit specification from the conduit run,
select Use Run NCD. If you have manually selected the part, the NCD of the selected part
appears and cannot be changed.
Type
Displays the types of turn features allowed by the selected Specification and Nominal
Conduit Diameter. Turn features are listed by short codes. You can change the turn feature
type if needed. If you have manually selected the part, this box displays Part selected
manually and cannot be changed.
Option

Intergraph Smart® 3D Electrical User's Guide 168

 Route Conduit

Displays a list of available turn features. The software generates this list based on the
conduit specification, the NCD, and the short code that you selected in the Type box. If you
have manually selected the part, this box displays Part selected manually and cannot be
changed.
Base Part Name
Displays the part name for the turn feature. The software selects the part number using the
conduit specification guidelines. Click Select Manually to override the conduit specification,
and select the part number from the catalog. If you select a part manually, the Nominal
Conduit Diameter, Type and Option properties are disabled.

Fill Information
Percent Fill
Displays or defines the percent cable fill in the conduit feature.

Intergraph Smart® 3D Electrical User's Guide 169

SECTION 6

Insert Transition
Places and modifies a transition to
accommodate a cableway cross-section change.
You can create a transition feature only at an
existing cableway end feature or cable tray nozzle.

Using Insert Transition , you can add

functional capabilities to your cableway during the
routing process. By placing such objects during the
routing process, the software presents a more
accurate model of the final cableway without
extensive editing of the cableway system.
During routing, you can click this command and the
software determines the settings and placement of the transition. When the transition feature is
finished, the software returns to the routing process. You can also insert transitions as
necessary after the route is completed.
If you insert a transition on an existing cableway route, you first must identify an end for starting
the transition. The software sets the offset cross-section to match the selected end.
If you insert a transition while routing cableway, the transition starts at the last routing end
connection. The software uses the current routing data, such as run name and cross-section, to
populate the Properties dialog box for the transition. After you insert the transition, the Route
Cableway command continues with the new cross-section from the transition.

Insert Transition Ribbon

Allows you to create cableway transitions that accommodate changes in the shape, size, and
orientation of the cableway.
Properties
Opens the Transition Settings dialog box. For more information, see Transition Settings
Dialog Box (on page 182).
Start Transition
Prompts you to select an end feature or nozzle at which to insert the cableway transition.

Offset Transition
Prompts you to establish the offset cross section for the cableway transition. If a part is
associated to the transition feature, the software removes the offset box.
Part
Allows you to select the component from the catalog that you want to insert. The list
includes the last 10 names of component parts that you have placed. The More option
opens the Select Part dialog box for browsing the catalog for the correct part.

Intergraph Smart® 3D Electrical User's Guide 170

 Insert Transition

The Part box is not enabled if you are inserting a cableway transition (because cableway
does not have parts). However, the box is enabled if you are inserting a cable tray reducer,
for example.
Finish
Ends the placement of the transition feature. Click this button after you are satisfied with the
transition.
Plane
Activates options for selecting a route working plane for the transition centerline. The
options include:
▪ Plan Plane
Defines the work surface as the XY plane at the depth of the active end. You also can
press CTRL+1 to select this option.

▪ Elevation Plane: East-West ( Z Plane: X-Axis)

Defines the work surface as the XZ plane. You also can press CTRL+2 to select this
option.
▪ Elevation Plane: North-South ( Z Plane: Y-Axis)
Defines the work surface as the YZ plane. You also can press CTRL+3 to select this
option.
▪ Plane by Turn/Branch
Defines the work surface as the plane defined by an existing turn or branch. You select
the turn or branch to set the plane. You also can press CTRL+4 to select this option.
▪ Plane by Three Points
Defines the work surface using three points that you define. You also can press
CTRL+5 to select this option.
▪ No Plane
Clears any work surfaces. The software does not project points that you place to any
plane. You also can press CTRL+6 to select this option.
Run
Specifies the name of the cableway associated with the transition. You can select another
run from the list if necessary.
<New Cableway> displays the New Cableway dialog box. Use this option to create a new
cableway run.
<New/Continue Run> extends an existing cableway if you select the end feature of the
conduit run. If a run is continued, all runs associated with the parent system display in the
list. If you do not select an end feature, the New Cableway dialog box displays to create a
cableway. For more information, see New Cableway Dialog Box (on page 103).
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.

Intergraph Smart® 3D Electrical User's Guide 171

 Insert Transition

More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different electrical system. For more information, see Select Cableway
Dialog Box (on page 112).
Type
Designates the type of transition feature. Options include Straight Parallel, Straight
Slanted, and Turn.
Shape
Allows you to select the shape of the cableway. You can change size and orientation, as
needed. Options include Rectangular, Round, and Flat Oval.
Width
Defines the width of the rectangular or flat oval transition feature. Values stored in the
reference data determine the list of options. Also, you can enter an amount for the width.
Depth
Defines the depth of the rectangular or flat oval transition feature. Values stored in the
reference data determine the list of options. Also, you can enter an amount for the depth.
Orientation
Allows you to change the orientation of a cross section while routing, or you can edit the
orientation value after routing by displaying feature property pages. The Orientation value
can orient the cross section in a standard or skewed position and allows you to specify the
location of a cross section in the cableway. Orientation changes the local axis of the
cableway associated with the width axis of the offset cross section. You cannot access the
command if an end feature or nozzle is selected to position the offset; this action fixes the
orientation of both ends of the transition.
Align
Positions the transition on the section view of the cross section. This control is only available
for straight parallel transitions.

Align Centerline

Align Top Left

Align Top Right

Align Bottom Right

Align Bottom Left

Align Top Center

Align Right Center

Align Bottom Center

Align Left Center

Intergraph Smart® 3D Electrical User's Guide 172

 Insert Transition

Not Aligned

Length
Specifies the length of the transition. Type or select a length for the transition.
Diameter
Sets the diameter for a round transition. The diameter is not available if you select an end
feature or nozzle to position the offset, because this action determines the cross section
shape and size of the offset cross section.
Throat Radius
Allows you to set the throat radius distance for a turn transition.

Angle Lock
Locks or unlocks the Angle box.
Angle
Defines the angle of the turn transition. When you enter a value, the software changes the
angle accordingly. Values can range from 0 to 180.

Edit Cableway Transition Feature Ribbon

Displays options for editing a cableway transition.
Properties
Displays the Cableway Transition Feature Properties dialog box. For more information,
see Cableway Transition Feature Properties Dialog Box (on page 123).
Move From
Click to specify the starting location of the move vector. If you do not define a starting point,
the software assumes that the current location of the object is the starting point.
Move To
Click to specify the ending location of the move vector.
End
Allows you to select the beginning, end, or both faces of the transition. If you select both
faces, only limited options for editing the properties are available.
Part
Allows you to specify the part associated with the transition feature.
The Part box is enabled only if you are editing a cable tray (cableway does not have parts).
Plane
Activates options for selecting a working plane for the route path. Six options are available:
▪ Plan Plane
Defines the work surface as the XY plane at the depth of the active end. You also can
press CTRL+1 to select this option.

Intergraph Smart® 3D Electrical User's Guide 173

 Insert Transition

▪ Elevation Plane: East-West ( Z Plane: X-Axis)

Defines the work surface as the XZ plane. You also can press CTRL+2 to select this
option.
▪ Elevation Plane: North-South ( Z Plane: Y-Axis)
Defines the work surface as the YZ plane. You also can press CTRL+3 to select this
option.
▪ Plane by Turn/Branch
Defines the work surface as the plane defined by an existing turn or branch. You select
the turn or branch to set the plane. You also can press CTRL+4 to select this option.
▪ Plane by Three Points
Defines the work surface using three points that you define. You also can press
CTRL+5 to select this option.
▪ No Plane
Clears any work surfaces. The software does not project points that you place to any
plane. You also can press CTRL+6 to select this option.
Type
Designates the type of transition feature. Options include Straight Parallel, Straight
Slanted, and Turn. This box is enabled only for cableway, not for cable tray.
Shape
Sets the shape of the cross section. When you change the type, the dimension boxes
change accordingly. This box is enabled only for cableway, not for cable tray.
▪ If you select Rectangle or Flat Oval, the Width and Depth boxes are available.
▪ If you select Round, the Diameter box is available.
This box displays the current value if an end feature is selected to position the offset
because this fixes the cross section shape and the size of the offset cross section.
Width
Sets the width dimension of the cross section. This option is available only if you have
selected Rectangle or Flat Oval in the Shape box. Values stored in the reference data
determine the list of options. The list displays only the values that are valid for the current
depth. If the depth is not defined, or the Depth box is empty, the width size is based on the
default width ratio.
Depth
Sets the depth of the cross section. This option is available only if you have selected
Rectangle or Flat Oval in the Shape box. The list of options is determined by the values
stored in the reference data. The list displays only the values that are valid for the current
width. If the width is not defined, or the Width box is empty, the depth size is based on the
default width ratio.
Diameter
Sets the diameter of the round cross section.

Intergraph Smart® 3D Electrical User's Guide 174

 Insert Transition

Orientation
Determines the orientation of the cross section.
Align
Sets the alignment for the transition. Each alignment entry has a point that represents the
alignment point on the section view of the cross section.

Align Centerline

Align Top Left

Align Top Right

Align Bottom Right

Align Bottom Left

Align Top Center

Align Right Center

Align Bottom Center

Align Left Center

Not Aligned

Length
Enter or select a length for the transition.

Edit Cableway Turn Transition Feature Ribbon

Displays options for editing a cableway turn transition.
Properties
Displays the Cableway Turn Transition Feature Properties dialog box. For more
information, see Cableway Turn Transition Feature Properties Dialog Box (on page 128).
Move From
Click to specify the starting location of the move vector. If you do not define a starting point,
the software assumes that the current location of the object is the starting point.
Move To
Click to specify the ending location of the move vector.
Plane
Activates options for selecting a working plane for the route path. Two options are available:
Width Plane and Depth Plane .

Intergraph Smart® 3D Electrical User's Guide 175

 Insert Transition

Type
Designates the type of transition feature.

Angle Lock
Locks or unlocks the Angle box. Locking the corresponding angle value creates a constraint
along which the selected turn angle can be moved.
Angle 2
Specifies the angle of the turn feature located at the end of one associated leg. If this box is
blank, there is no turn feature located at the end of the leg. Although this value can be
changed, the location of the corresponding turn cannot. Modification of this value repositions
the selected turn until the specified angle is achieved.
Angle 1
Specifies the angle of the turn that you are editing. Modification of this value repositions the
selected turn until the specified angle is achieved.
Angle 3
Specifies the angle of the turn feature located at the end of one associated leg. If this box is
blank, there is no turn feature located at the end of the leg. Although this value can be
changed, the location of the corresponding turn cannot. Modification of this value repositions
the selected turn until the specified angle is achieved.

What do you want to do?

▪ Create a transition (on page 177)
▪ Create a transition while routing (on page 178)
▪ Set alignment options (on page 180)

Intergraph Smart® 3D Electrical User's Guide 176

 Insert Transition

Create a transition
1. Click Insert Transition .
2. Set the transition start point by selecting an end feature or a nozzle.
If you select an end before clicking Insert Transition, the software inserts the
transition at that point.

3. On the ribbon, select a part if you are working with cable tray.

4. Click to place the position of the offset cross-section.

5. If needed, click the other controls on the ribbon to set the plane, type, shape, and
dimensions of the transition.
6. Click Align on the Insert Transition ribbon.
7. Select an option, represented by an icon, from the list to define the alignment for your
transition. The Align control is only available for straight parallel transitions.

- Align Centerline

- Align Top Left

- Align Top Right

Intergraph Smart® 3D Electrical User's Guide 177

 Insert Transition

- Align Bottom Right

- Align Bottom Left

- Align Top Center

- Align Right Center

- Align Bottom Center

- Align Left Center

- Not Aligned
8. Click Finish.

Create a transition while routing

1. Click Route Cableway , and create or extend a cableway run or network.

2. Click Insert Transition .

Intergraph Smart® 3D Electrical User's Guide 178

 Insert Transition

3. On the ribbon, select a part if you are working with cable tray.

4. Click to place the position of the offset cross-section.

5. Click Align on the Insert Transition ribbon.
6. Select an option, represented by an icon, from the list to define the alignment for your
transition. The Align control is only available for straight parallel transitions.

- Align Centerline

- Align Top Left

- Align Top Right

- Align Bottom Right

- Align Bottom Left

- Align Top Center

- Align Right Center

- Align Bottom Center

- Align Left Center

- Not Aligned
7. If needed, click the other controls on the ribbon to set the plane, type, shape, and
dimensions of the transition.

Intergraph Smart® 3D Electrical User's Guide 179

 Insert Transition

8. Click Finish.

9. Continue routing the cableway as needed.

Set alignment options

1. Click Align on the Insert Transition ribbon.
2. Select an option, represented by an icon, from the list to define the alignment for your
transition. The Align control is only available for straight parallel transitions.

- Align Centerline

- Align Top Left

- Align Top Right

- Align Bottom Right

- Align Bottom Left

- Align Top Center

- Align Right Center

- Align Bottom Center

- Align Left Center

- Not Aligned

Intergraph Smart® 3D Electrical User's Guide 180

 Insert Transition

Select Part Dialog Box

Allows selection of the part to be placed. This dialog box appears when you are inserting a
transition or component. By browsing through the part hierarchy, you can find the applicable part
in the parts catalog. After you select a part, the software returns you to the model, where you
can finalize placement.
Back
Returns you to the previously selected location. Use this command to navigate through the
hierarchy to the specific part you need.
Forward
Sends you to the last selected location that you moved away from by using the Back button.
Use this command to navigate through the hierarchy to the specific part you need.
Up One Level
Brings up the next highest level of the catalog hierarchy. Use this command to navigate
through the hierarchy to the specific part you need.
Copy
Copies the selected object. This command is available only in the Catalog task.
Paste
Pastes a copied object. This command is available only in the Catalog task.
Delete
Deletes the selected object. This command is available only in the Catalog task.
Undo
Reverses the most recent operation. This command is available only in the Catalog task.

New Object
Creates a new object. This command is available only in the Catalog task.

Move Up
Moves up one object. The level in the hierarchy remains the same.
Move Down
Moves down one object. The level in the hierarchy remains the same.
Properties
Displays the properties of the selected part. Because you cannot modify any properties until
the part is placed, all properties on the dialog box are read-only.
Preview
Displays a picture of the selected part. The image file must be assigned to the part in the
reference data.
Filter
Filters data in the grid view by the existing data in the grid. You must have the Grid View

Intergraph Smart® 3D Electrical User's Guide 181

 Insert Transition

active to filter. You cannot filter the List View .

Sort
Activates the Sort dialog box, which you can use to sort data on multiple columns. The
software saves the sort information in the catalog database, not your session file. For more
information, refer Catalog help.
Customize Current View
Activates the Customize Current View dialog box, which you can use to show and hide
property columns and control the property column display order (the order from left to right).
For more information, refer Catalog help.
List View
Sets the dialog box to display the parts in a list view.

Grid View
Sets the dialog box to display the parts in a spreadsheet-style grid view.
Check Data
Checks the consistency of the data in the grid against other data in the catalog. This
command is available only in the Catalog task.
Address
Specifies your exact location within the displayed hierarchy.

Transition Settings Dialog Box

Sets options for a transition feature that you are inserting.

Topics
General Tab (Transition Settings Dialog Box) ............................... 182
Cross Section Tab (Transition Settings Dialog Box) ..................... 183

General Tab (Transition Settings Dialog Box)

Displays and defines the general properties of the transition that you are inserting.

Standard
Cableway
Specifies the name of the cableway run associated with the transition feature. You can
select another run from the list if necessary.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different electrical system. For more information, see Select Cableway
Dialog Box (on page 112).
Specification

Intergraph Smart® 3D Electrical User's Guide 182

 Insert Transition

Specifies the cableway specification from a list of allowed specifications for the associated
system. Specifications are assigned to systems in the Systems and Specifications task.
Transition Type
Displays the type of the transition, such as parallel.
Part
Specifies a part associated with the transition, if applicable.
Length
Specifies the length of the transition along the cableway. This box appears for straight
slanted transitions only.

Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.

Cross Section Tab (Transition Settings Dialog Box)

Displays and defines the cross section properties of the transition that you are inserting.

Standard
Position
Displays or defines the start or end face of the transition.
Cross Section
Defines the shape of the cross section. You can select from rectangular, round, and flat
oval. If the cross section is round, only one other property is available: Diameter.
Width
Sets the width dimension for rectangular and flat oval cross sections. Values stored in the
reference data determine the list of options. The list displays only the values that are valid
for the current depth. If the depth is not defined (that is, the Depth box is blank), all widths
listed in the current specification are shown.
Depth
Sets the depth of the cross section for rectangular and flat oval cross sections. Values
stored in the reference data determine the list of options. The list displays only the values
that are valid for the current width. If the width is not defined (that is, the Width box is
blank), all depths listed in the current specification are shown.
Diameter
Determines the diameter for round cross sections. Values stored in the reference data
determine the list of options. You can also enter a value that is not on the list.
Orientation Angle
Sets an angle between the local axis associated with the cross-section and the width axis. If
the angle value is zero, the width is aligned with the local cross-section axis.
The following picture shows the orientation angle (C).

Intergraph Smart® 3D Electrical User's Guide 183

 Insert Transition

(A) - Cross-section
(B) - Width axis
(C) - Orientation angle

Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.

Intergraph Smart® 3D Electrical User's Guide 184

SECTION 7

Insert Component

Places components such as branches, ends, reducers, and turns for cableway and
couplings, unions, and tees for conduit. You must select a straight feature, end feature, nozzle,
or component port in the model when using this command. You can add components either
during the routing process or after the cableway or conduit has been routed.
The software uses the specification and the insertion point to filter the components available for
placement. The software also generates any mating and connection parts required to connect
the inserted part to adjacent objects.
When inserting components, you can use the Tools > PinPoint and Tools > Point Along
commands to position components precisely.
If you specify that the component should be created as a new run by selecting <New
Cableway> from the Run list, the software populates the New Cableway dialog box with the
properties belonging to the existing run (that is, the run you selected in which to insert the
component). If the properties of the existing run do not match the defaults specified in the
electrical system, the software displays a dialog box asking you if you want to use the properties
of the System, Run, or None.

Insert Component Ribbon (Cableway)

Allows you to insert components in a cableway route along a straight feature, end feature,
nozzle, or component port. You can insert components after routing or while routing.
Properties
Opens the Insert Component Settings dialog box. For more information, see Insert
Component Settings Dialog Box (on page 196).

Select Straight or End Feature

Prompts you to select a straight feature, end feature, nozzle, or a component port.
Part
Allows you to select a part from the catalog.

Enter Insertion Point

Positions the component that you are placing. You can use the Tools > PinPoint and Tools
> Point Along commands to define the precise location of the component.
Finish
Ends the placement of the component feature. Click this button after you are satisfied with
the editing that you have completed and the positioning of the component.
Run
Specifies the name of the run in which the component is placed.
<New Cableway> displays the New Cableway dialog box. Use this option to create a new
cableway run.

Intergraph Smart® 3D Electrical User's Guide 185

 Insert Component

<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different electrical system. For more information, see Select Cableway
Dialog Box (on page 112).
Name
Displays the name of the component that you are inserting. This control becomes available
when you choose a part.
The following controls become available after you click to position the component.
Flip
Select this option to change the component port that is connected to the selected port.
This option is not available while inserting a component in free space. Use Axis
of rotation, Rotate , and Angle to flip the component in free space.
Reference position
Slides the component that you are inserting so that its origin or selected port is positioned at
the insertion point. If the selected reference position does not lie along the axis of the leg,
then the software projects the position so that it intersects the axis and the component slides
so that the projected point is located at the insertion point.
Axis of rotation
Specifies the axis of rotation for the component. This option is only available while inserting
a component in free space. The default option is the X-axis in plant mode, and E-axis in
ship mode.
Rotate
Select to rotate the component about the cableway or the axis of rotation interactively.
Angle
Type an angle at which you want the component rotated about the cableway or axis.

Insert Component Ribbon (Conduit)

Allows you to insert components in a conduit route along a straight feature, end feature, nozzle,
or component port. You can insert components after routing or while routing.
Properties
Opens the Conduit Component Properties dialog box. For more information, see Conduit
Component Properties Dialog Box (on page 160).

Select Straight or End Feature

Prompts you to select a straight feature, end feature, nozzle, or a component port to begin
the steps to insert the conduit component.

Intergraph Smart® 3D Electrical User's Guide 186

 Insert Component

Type
Displays a list of available components. Select the type of component that you want to
insert.
Option
Sets the available options of the component type. The list of options depends on the
contents of the reference data for the component.

Enter Insertion Point

Positions the component that you are placing. You can use the Tools > PinPoint and Tools
> Point Along commands to define the precise location of the component.
Finish
Ends the placement of the component feature. Click this button after you are satisfied with
the editing that you have completed and the positioning of the component.
Run
Specifies the name of the run in which the component is placed.
<New Conduit Run> displays the New Conduit Run dialog box. Use this option to create a
new conduit run.
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Conduit dialog box. Use this option to select a conduit run that is
associated with a different conduit system. For more information, see Select Conduit Dialog
Box (on page 157).
Name
Displays the name of the component that you are inserting. This option is only available
after you choose the type of part.
The following controls become available after you click to position the component.
Flip
Select this option to change the component port that is connected to the selected port.
This option is not available while placing a component in free space. Use Axis of
rotation, Rotate , and Angle to flip the component in free space.
Reference position
Slides the component that you are inserting so that its origin or selected port is positioned at
the insertion point. If the selected reference position does not lie along the axis of the leg,
then the software projects the position so that it intersects the axis and the component slides
so that the projected point is located at the insertion point.
Axis of rotation
Specifies the axis of rotation for the component. This option is only available while inserting
a component in free space. The default option is the X-axis in plant mode, and E-axis in
ship mode.

Intergraph Smart® 3D Electrical User's Guide 187

 Insert Component

Rotate
Rotates the component about the conduit. Select to rotate the component about the conduit
interactively.
Angle
Type an angle at which you want the component rotated about the conduit.

Edit Cableway Along Leg Feature Ribbon

Displays options for editing a cableway along leg feature.
Properties
Displays the Cableway Along Leg Feature Properties dialog box. For more information,
see Cableway Along Leg Feature Properties Dialog Box (on page 113).
Move From
Click to specify the starting location of the move vector. If you do not define a starting point,
the software assumes that the current location of the object is the starting point.
Move To
Click to specify the ending location of the move vector.
Run
Specifies the name of the cableway run. You can select a different run from the list.
<New Cableway> displays the New Cableway dialog box. Use this option to create a new
cableway run.
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different electrical system. For more information, see Select Cableway
Dialog Box (on page 112).
Part
Displays the part description.
Direction
This option is not available for this release.
Angle 1
Specifies the branch angle of the along leg feature. We recommend that you do not edit this
angle if the along leg feature ends with a free leg.
Angle 2
Specifies the branch angle of the feature located at the other end of the branch. This box is
blank if the branch is a free leg.

Intergraph Smart® 3D Electrical User's Guide 188

 Insert Component

Edit Conduit Component Ribbon

Displays options for editing a conduit component.
Properties
Opens the Conduit Component Properties dialog box. For more information, see Conduit
Component Properties Dialog Box (on page 160).
Move From
Click to identify the origin of the move vector. If you do not define a starting point, the
software assumes the current location of the component is the starting point.
Move To
Click to identify the termination point of the move vector.
Run
Specifies the name of the conduit run associated with the component.
<New Conduit Run> displays the New Conduit Run dialog box. Use this option to create a
new conduit run.
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Conduit dialog box. Use this option to select a conduit run that is
associated with a different conduit system. For more information, see Select Conduit Dialog
Box (on page 157).
Type
Displays the short code associated with the selected component.
Option
Displays the option of the selected component, if applicable.
Name
Displays the name of the selected component.
Flip
Select this option to change the component port that is connected to the selected port.

Rotate
Select to rotate the component about the conduit interactively.
Angle
Type an angle at which you want the component rotated about the conduit.

What do you want to do?

▪ Insert a cable tray component (on page 190)
▪ Insert a conduit component (on page 191)

Intergraph Smart® 3D Electrical User's Guide 189

 Insert Component

▪ Insert a component while routing (on page 194)

▪ Insert a cableway component in free space (on page 192)
▪ Insert a conduit component in free space (on page 193)
▪ Rotate a conduit component (on page 195)

Insert a cable tray component

1. Click Insert Component .
2. Select a straight feature, end feature, nozzle, or component port as the insertion point of the
component.

3. In the Part box, select a part from the list or click More for additional parts from the catalog.
4. Click to define the position of the component if you are placing it in a straight feature.

5. If needed, change the properties of the component by using the options on the ribbon.

Intergraph Smart® 3D Electrical User's Guide 190

 Insert Component

6. Click Finish.

Insert a conduit component

1. Click Insert Component .
2. Select a straight feature, end feature, nozzle, or component port as the starting point of the
component.

3. Select the component type in the Type box on the ribbon.

4. Click to define the position of the component if you are placing it in a straight feature.

Intergraph Smart® 3D Electrical User's Guide 191

 Insert Component

5. If needed, change the properties of the component using the options on the ribbon.

6. Click Finish.

Insert a cableway component in free space

1. Click Insert Component on the vertical toolbar.

2. Click Cableway on the ribbon bar.

3. Click the Graphic View.
The software displays the New Cableway Dialog Box (on page 103).
4. Specify the required properties, and then click OK.
5. Select a component from the Part box on the ribbon bar.
-OR-
Click More to select a part from the catalog.
The software displays the computed graphics of the component and additional options on
the ribbon bar.
6. If necessary, modify the position of the component using the Reference Position, Axis of
Rotation, Rotate , and Angle options on the ribbon.
7. Click Finish.
The software places the component in free space.
To continue routing, select an end feature on the component and use Route Cableway
or Quick Route .

Intergraph Smart® 3D Electrical User's Guide 192

 Insert Component

Insert a Component Using Existing Run

1. Click Insert Component on the vertical toolbar.

2. Click Cableway on the ribbon bar.

3. Select a cableway from the Run box, and then click the Graphic View.
4. Select a component from the Part box on the ribbon bar.
-OR-
Click More to select a part from the catalog.
The software displays the computed graphics of the component and additional options on
the ribbon bar.
5. If necessary, modify the position of the component using the Reference Position, Axis of
Rotation, Rotate , and Angle options on the ribbon.
6. Click Finish.
The software places the component in free space.
To continue routing, select an end feature on the component and use Route Cableway
or Quick Route .

Insert a conduit component in free space

1. Click Insert Component on the vertical toolbar.

2. Click Conduit on the ribbon bar.

3. Click the Graphic View.
The software displays the New Conduit Run Dialog Box (on page 153).
4. Specify the required properties, and then click OK.
5. Select a component from the Type box on the ribbon bar.
-OR-
Click More to select a component from the catalog.
The software displays the computed graphics of the component and additional options on
the ribbon bar.
6. If necessary, modify the position of the component using the Reference Position, Axis of
Rotation, Rotate , and Angle options on the ribbon.
7. Click Finish.
The software places the component in free space.
To continue routing, select an end feature on the component and use Route Conduit
or Quick Route .

Insert a Component Using Existing Run

1. Click Insert Component on the vertical toolbar.

Intergraph Smart® 3D Electrical User's Guide 193

 Insert Component

2. Click Conduit on the ribbon bar.

3. Select a conduit run from the Run box, and then click the Graphic View.
4. Select a component from the Type box on the ribbon bar.
-OR-
Click More to select a component from the catalog.
The software displays the computed graphics of the component and additional options on
the ribbon bar.
5. If necessary, modify the position of the component using the Reference Position, Axis of
Rotation, Rotate , and Angle options on the ribbon.
6. Click Finish.
The software places the component in free space.
To continue routing, select an end feature on the component and use Route Conduit
or Quick Route .

Insert a component while routing

1. Click Insert Component .
2. Select a straight feature, end feature, nozzle, or component port as the insertion point of the
component.
3. Do one of the following:
a. For a cable tray component, select a part in the Part box.
b. For a conduit component, select the type in the Type box.
4. Click to define the position of the component if you are placing it in a straight feature.
5. If needed, change the properties of the component by using the options on the ribbon.
6. Click Finish.
7. Continue routing the cableway or conduit run.

Intergraph Smart® 3D Electrical User's Guide 194

 Insert Component

Rotate a conduit component

1. Click Select .
2. Select Conduit Features in the Locate Filter box.
3. Select the component.

4. Click Rotate on the ribbon, and then move the mouse to rotate the component.
5. Click to release the component at the new rotation angle.
You can also type a rotation angle in the Angle box.

6. As necessary, edit other properties using the options on the ribbon.

Edit component properties

1. Click Select .
2. Do one of the following:
▪ Select Cableway Features in the Locate Filter box to edit a cable tray component.
▪ Select Conduit Features in the Locate Filter box to edit a conduit component.
3. Select the component.
4. Click Properties to edit component properties.
5. Edit the component properties.

Intergraph Smart® 3D Electrical User's Guide 195

 Insert Component

Delete a component
1. Click Select .
2. Do one of the following:
▪ Select Cableway Features in the Locate Filter box to delete a cable tray component.
▪ Select Conduit Features in the Locate Filter box to delete a conduit component.
3. Select the component.
4. Click Delete .

Insert Component Settings Dialog Box

Sets options for a cable tray component that you are inserting in the model.
General Tab (Insert Component Settings Dialog Box) (on page 196)

General Tab (Insert Component Settings Dialog Box)

Displays and defines the general properties of the cable tray component.

Standard
Cableway
Specifies the name of the cableway run. You can select another run from the list if
necessary.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different electrical system. For more information, see Select Cableway
Dialog Box (on page 112).
Specification
Displays the cableway specification.
Angle
Type an angle at which you want the component rotated. Any previous settings are
automatically updated.
Part
Displays the part description of the component.
The additional properties listed in the Standard category depend on the exact component that
you are placing.

Maintenance Volume
A maintenance volume is space reserved for installing and maintaining cables in a cable tray
and can be defined at the cableway level and optionally overridden at the feature level. You can
also define maintenance volumes for duct banks to reserve space for a mud mat below the duct

Intergraph Smart® 3D Electrical User's Guide 196

 Insert Component

bank. Use the Format > View command to turn on the Maintenance aspect so you can see the
maintenance volumes in the model.
Maintenance Volume Properties Option
Select Use Run Properties to use the maintenance volume properties defined for the
parent run. Select Default Feature Properties to define maintenance volume settings that
are unique for this feature. This option is only available when editing the properties of a
feature.
Maintenance Shape
Specifies the maintenance volume shape: Rectangle, Round, or Flat Oval.
Maintenance Diameter
Specifies the diameter of the maintenance volume. This option is only available when
Maintenance Shape is set to Round.
Maintenance Width
Specifies the width of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Depth
Specifies the depth of the maintenance volume. This option is only available when
Maintenance Shape is set to Rectangle or Flat Oval.
Maintenance Justification
Specifies how the maintenance volume (gray box below) aligns with the feature (blue cross
section below). There are ten options available: (1) Top Left, (2) Top Center, (3) Top
Right, (4) Center Left, (5) Center Center, (6) Center Right, (7) Bottom Left, (8) Bottom
Center, (9) Bottom Right, and User Defined.

Maintenance Width Offset

Specifies the width offset distance. This option is only available when Maintenance
Justification is set to User Defined.
Maintenance Depth Offset
Specifies the depth offset distance. This option is only available when Maintenance
Justification is set to User Defined.

Intergraph Smart® 3D Electrical User's Guide 197

 Insert Component

Fill Information
Fill Efficiency
Specifies the efficiency of the stacking of cables in the cableway. Type a real number,
integer, or percent. For example, type 0.9, 90, or 90%.
Signal Type
Specifies the cable usage, which Smart 3D uses in tray fill calculations. To change the
options on the list, edit the Signal Type select list in Catalog.
Voltage Grade
Specifies the voltage grade, which Smart 3D uses when determining the range of voltage
that the cableway can carry. To change the options on the list, edit the Voltage Grade
select list in Catalog.

Intergraph Smart® 3D Electrical User's Guide 198

SECTION 8

Auto Connect Cableways

You can automatically connect cableways. This command automatically places the fittings
needed to connect the cableway. Zero spec cableway (Cws-0) is routed between existing
cableways and a new cableway is automatically placed.

Auto Connect Cableways Ribbon

Sets options for automatically routing a cableway.
Locate Filter
Sets the feature: Cableways, Cableway Features, or Conduit End Features. By default,
Cableways is selected.

Select from Cableways

Select the cableway runs, cableway, or conduit end feature to connect "From." These
cableway centerlines display in green.

Select to Cableways
Select the cableway runs, cableway, or conduit end feature to connect "To." These
cableway centerlines display in blue. Centerlines of the Auto Connect Cableways that will be
created are displayed in yellow.
Finish
Click to create the cableways.
Reject Selection
Clears the currently selected features.
Accept Selection
Accepts the currently selected features.
Specification
Defines a cableway specification.
Distance
Defines an upper limit on the length of connecting cableways. Unlimited is an available
option on the drop-down field.

What do you want to do?

▪ Route cableways automatically (on page 200)
▪ Merge two duct bank segments (on page 201)

Intergraph Smart® 3D Electrical User's Guide 199

 Auto Connect Cableways

Route cableways automatically

1. Click Auto Connect .
2. Select a cableway for the vertical drop-outs to begin. You can select multiple cableways.

3. Accept the selection.

4. Select a cableway for the vertical drop-outs to end.
Placement of the new cableway is automatically calculated. The default placed cableway
value is CWS- 0.

Intergraph Smart® 3D Electrical User's Guide 200

 Auto Connect Cableways

5. Click Finish.

Merge two duct bank segments

The preferred approach to joining two or more discontinuous duct banks is to route from one of
the segments along the path.
Alternatively, you can manually reposition the conduits within the duct bank so that the two
cross-sections match. Then the two segments can be merged. After ensuring that the cross-
sections match up, each conduit run in one duct bank needs to be extended to join its
corresponding conduit run in the other duct bank. To achieve this join operation, use the Route
command or the Move command.
Without this manual joining, path continuity is not achieved and cables cannot be
routed between the two conduit runs.

Intergraph Smart® 3D Electrical User's Guide 201

 Auto Connect Cableways

Duct Banks at Pull Pits

To enable cable routing between the conduits, use pull pits to join conduits between duct banks.
Begin by placing the pull pit, found in Equipment, and then routing the duct banks up to the pull
pit. Within the pull pit, connect conduit end features belonging to different duct banks with zero
spec cableway (CWS-0). The zero spec cableway ensures continuity for cables to pass through.
In addition, using the Auto Connect command to create these connecting cableways simplifies
the process.
The following illustration is an example of a pull pit; this is just one option.

See Also
Auto Connect Cableways (on page 199)
Extend existing cableway (on page 80)
Place Equipment from the Catalog (on page 206)
Route Duct Bank (on page 92)

Intergraph Smart® 3D Electrical User's Guide 202

SECTION 9

Place Equipment
Specifies any piece of equipment from the Equipment folder of the catalog and places an
occurrence of it inside the model. You can modify the offset of the equipment, its relationships to
other equipment, and other properties during or after placement. Using positioning relationships,
the Place Equipment command allows you to mate, connect, or align equipment, and you can
use common tools like the PinPoint command for precise positioning of the equipment.
If a parent object is selected when you start Place Equipment, the System property is
automatically updated with the parent object.
You place equipment objects into the model by selecting the equipment from the Select
Equipment dialog box and positioning the equipment in the model using the available
relationships. When you select an equipment object from the Catalog, you can define a default
surface so that, when the equipment is placed into the model, the software automatically creates
a relationship to any other surface or reference element that you select. For example, you might
define the bottom of a pump as the default surface because you want the software to mate that
surface to the floor. If the software cannot find a suitable mating surface for the equipment, the
equipment object is placed in free space, pending additional design of the structures or other
reference elements.
You can also provide an optional offset distance from the surface or reference elements. The
default offset distance for any new piece of equipment is zero or the last offset used in the
current session. The software maintains the offset relationship between the default surface and
the surface or reference element in the workspace in the event of any changes to their position
(for example, if a slab is lowered, then the equipment follows the slab, maintaining the offset).
You can further define the equipment position and orientation by mating, aligning, or connecting
equipment to other objects in the model, or by moving or rotating the equipment.

Cable and Equipment

If you are going to use an object for routing cable, you must not model that object as equipment.
Although it may sometimes be desirable to model a piece of raceway, cable tray, or cable bus
as a piece of equipment, you should not do this if there is any possibility of ever needing to route
cable through the object. This is because cable routes cannot traverse equipment; they can only
be terminated by equipment. A cable cannot be properly routed through a piece of equipment.
The cable can only interconnect two pieces of equipment.

Equipment with Occurrence Properties Modeled Using Solid Edge

You cannot place equipment with occurrence properties modeled using Solid Edge unless Solid
Edge is installed on your computer. If you try to place such an object, the following message
appears: Cannot start Solid Edge. Exiting InitializSymbolDefinition.
As a workaround to the Solid Edge requirement, you can use the Bulkload utility with the flavors
option. Designers can create dozens of variations for any equipment part imaginable. Also, by
creating several variations of a part, rather than using occurrence properties to create the
variations automatically, designers can implement custom Solid Edge equipment without having
to install Solid Edge on every designer's computer.

Intergraph Smart® 3D Electrical User's Guide 203

 Place Equipment

Each variation of a part represents some minor deviation from the catalog part, be it on the basis
of size, operational specifications, or material. With Solid Edge, new variations can be created
on the basis of size, while the software allows manipulation of the operating parameters or
material of construction in the reference data. For more information on bulkloading with flavors,
refer to the Reference Data Guide, accessible from the Help > Printable Guides command in
the software.

Place Equipment Ribbon

Sets options for adding equipment to your model. This ribbon appears automatically after you
select the Place Equipment command and then select an equipment object, or when you
select an existing piece of equipment.
To find out the name of an option on the ribbon, pause the pointer over an option and
read the ToolTip.
Equipment Properties
Edits the occurrence properties and reviews the static properties of an existing piece of
equipment. Equipment properties can be edited only after the object is placed in the model.
Any object modeled in Solid Edge that has occurrence properties cannot be
placed or modified unless your computer has a copy of Solid Edge installed.
User Defined Form Definition
Displays User Defined Form for the particular equipment if it is defined in the catalog. See
the Equipment and Furnishings Reference Data Guide, available from the Help > Printable
Guides command in the software.
Relationship List
Lists all relationships for the selected equipment and provides an option for creating a new
relationship if the equipment is not already fully constrained. An equipment part is fully
constrained when it has sufficient defined relationships to prevent movement or rotation of
the part along all three coordinate axes.
Positioning Relationships
Displays the available options for types of positioning relationships. Some options may not
be available for all equipment types. See Positioning Relationships for more information.
Delete Relationship
Removes the selected relationship from the equipment model and the database. Using the
Relationships list box, select a previously existing relationship for the equipment, and click
Delete Relationship. You can use this command only when modifying existing equipment.
Equipment Reference
Prompts you for the reference on the equipment to be placed that will be affected by the
positioning relationship. In all cases, the part that you select in this step moves to create the
relationship, and the part chosen in the Second Part Reference step remains fixed.
Second Part Reference
Prompts you for the reference on the equipment object or reference element already in the
model that will be affected by the positioning relationship. After you select the reference, the
software repositions the first equipment part chosen with respect to the second part selected
in the definition of the relationship.

Intergraph Smart® 3D Electrical User's Guide 204

 Place Equipment

Offset
Defines the offset distance for a mate or align relationship. Offsets are disabled when
establishing a connect relationship. You can adjust this value after initial equipment
placement if needed.
Name
Displays the equipment name, as dictated by your predefined name rules, and accepts
changes to that name.
System
Specifies the system with which to associate the selected equipment. The default system is
the model itself.
<Select Graphically>
Allows you to select the system from the graphic view or from the Workspace Explorer.
You can then place or modify the equipment.

Select Equipment Dialog Box

Specifies the equipment needed for placement. This dialog box appears automatically when you
click the Place Equipment command. By browsing through the part hierarchy, you can find
any piece of equipment in the Catalog database. After you select a piece of equipment and click
OK, the Equipment Properties dialog box appears so you can define properties for the new
equipment. After you click OK on the Properties dialog box, the software returns you to the
model so that you can finalize configuration and placement.
Back
Returns you to the previously selected equipment part or node. Use this command to
navigate through the equipment hierarchy to the specific part you need.
Forward
Sends you to the last selected equipment part or node that you moved away from by using
the Back button. Use this command to navigate through the equipment hierarchy to the
specific part you need.
Up One Level
Brings up the next highest level of the Equipment catalog hierarchy. Use this command to
navigate through the equipment hierarchy to the specific part you need.
Properties
Displays the equipment properties as defined in the catalog.
Preview
Displays a bitmap symbol of the selected equipment. The image file must be assigned to the
equipment in the catalog reference data.
List View
Sets the dialog box to display equipment in a list view.

Grid View
Sets the dialog box to display equipment in a spreadsheet-style grid view.

Intergraph Smart® 3D Electrical User's Guide 205

 Place Equipment

Address
Specifies your exact location within the displayed hierarchy.

What do you want to do?

▪ Place equipment from the catalog (on page 206)
▪ Set positioning relationships for equipment (on page 207)
▪ Place doors from the catalog (on page 208)
▪ Place windows from the catalog (on page 209)
▪ Edit equipment properties (on page 210)
▪ Edit equipment relationships (on page 211)

Place equipment from the catalog

1. Click Place Equipment on the vertical toolbar.
The Select Equipment dialog box displays.
2. Locate the necessary equipment type using the tree view. Expand the nodes for the general
type of equipment that you need, continuing until a list of available parts appears in the
catalog window.

3. In the list view, select the equipment object.

4. Click OK on the Select Equipment dialog box.

The Equipment Properties dialog box displays so that you can define properties for the
new object.
5. Define properties as needed, and then click OK to return to the workspace and place the
equipment. For more information, see Equipment Properties Dialog Box (on page 213).

Intergraph Smart® 3D Electrical User's Guide 206

 Place Equipment

6. Click in a graphic view to select the mounting surface and approximate position for the
object.

Press the left and right arrow keys to rotate the equipment by 90-degree increments
at any time during the placement of the equipment. Press the up arrow key to scroll through
the three possible axes of rotation. Press the down arrow key to scroll to each datum point.
7. Using the Place Equipment ribbon, do any of the following, if needed:
a. Set an offset for the relationship by specifying the distance in the Offset box.
b. Click Properties on the ribbon, and type any necessary property information in the
grid provided on the Equipment Properties dialog box.
c. Add or change a positioning relationship by selecting it from the Relationship list on the
Place Equipment ribbon.
d. Select a system with which to associate the new object in the System box.
If you intend to use an object for routing cable, you must not model that object as
equipment. For example, a pull box should be created in the catalog data as a conduit fitting, not
a piece of equipment. Otherwise, the object will render conduit networks useless for cable
routing every time it is used.

Set positioning relationships for equipment

1. Select the equipment for which you need to define a relationship.
2. In the Relationship List box on the Place Equipment ribbon, select <New Relationship>.
3. Select one of the available positioning relationships in the Positioning Relationships list
box, and follow the status bar prompts.
Depending on the type of positioning relationship defined in the previous step,
surfaces or points need to be defined to finish configuring the relationship. For more
information, see Positioning Relationships.

Intergraph Smart® 3D Electrical User's Guide 207

 Place Equipment

Place doors from the catalog

1. Click Place Equipment on the vertical toolbar.
The Select Equipment dialog box displays.
2. Locate the door to place under the Equipment > Architectural node.

3. In the list view, select the door to place.

4. Click OK on the Select Equipment dialog box.

The Equipment Properties dialog box displays so that you can define properties for the
new object.
5. Define properties as needed, and then click OK to return to the workspace and place the
equipment. For more information, see Equipment Properties Dialog Box (on page 213).
6. Click in a graphic view to select the mounting surface and approximate position for the
object.

Press the left and right arrow keys to rotate the door by 90-degree increments at
any time during the placement of the door. Press the up arrow key to scroll through the three
possible axes of rotation.

Intergraph Smart® 3D Electrical User's Guide 208

 Place Equipment

7. Using the Place Equipment ribbon, do any of the following, if needed:

a. Set an offset for the relationship by specifying the distance in the Offset box.
b. Click Properties on the ribbon, and type any necessary property information in the
grid provided on the Equipment Properties dialog box.
c. Add or change a positioning relationship by selecting it from the Relationship list on the
Place Equipment ribbon.
d. Select a system with which to associate the new object in the System box. We
recommend that you place the door in the same system as the parent wall.

Place windows from the catalog

1. Click Place Equipment on the vertical toolbar.
The Select Equipment dialog box displays.
2. Locate the window to place under the Equipment > Architectural > Windows node.

3. In the list view, select the window part to place.

4. Click OK on the Select Equipment dialog box.

The Equipment Properties dialog box displays so that you can define properties for the
new object.
5. Define properties as needed, and then click OK to return to the workspace and place the
equipment. For more information, see Equipment Properties Dialog Box (on page 213).

Intergraph Smart® 3D Electrical User's Guide 209

 Place Equipment

6. Click in a graphic view to select the mounting surface and approximate position for the
object.

Press the left and right arrow keys to rotate the window by 90-degree increments at
any time during the placement of the window. Press the up arrow key to scroll through the
three possible axes of rotation.
7. Using the Place Equipment ribbon, do any of the following, if needed:
a. Set an offset for the relationship by specifying the distance in the Offset box.
b. Click Properties on the ribbon, and type any necessary property information in the
grid provided on the Equipment Properties dialog box.
c. Add or change a positioning relationship by selecting it from the Relationship list on the
Place Equipment ribbon.
d. Select a system with which to associate the new object in the System box. We
recommend that you place the window in the same system as the parent wall.

Edit equipment properties

1. Select the equipment object that you need to modify.
2. Click Equipment Properties on the horizontal ribbon.
The Equipment Properties dialog box displays.
You can also access the Equipment Properties dialog box by selecting Properties
from the Edit menu, or by right-clicking the selected object and choosing Properties from
the short-cut menu.
3. Choose the appropriate dialog box tabs, and modify the properties as needed.
4. Click OK to save your changes, and return to the workspace.
You can also select Apply to put the changes into effect and continue working in the
Equipment Properties dialog box.

Intergraph Smart® 3D Electrical User's Guide 210

 Place Equipment

All occurrence and definition properties for an equipment object are defined by the Microsoft
Excel® workbook named Equipment.xls in the reference data. For information on adding or
editing different types of properties, refer to the Reference Data Guide, accessible from the Help
> Printable Guides command.
▪ If more than one piece of equipment is selected, the Occurrence tab displays only the
common occurrence properties of the objects.
▪ The Definition, Connections, Weight & CG, and Relationship tabs are read-only. You
cannot edit this information from the Equipment Properties dialog box.
▪ If the equipment model was created using Solid Edge, then any changes that affect the
shape or size of the equipment model require that you have Solid Edge running on your
computer.

Edit equipment relationships

1. Select the equipment to modify.
To edit the properties of a designed equipment object for which geometry has yet to
be defined, you must select the object from the system hierarchy in the Workspace
Explorer.
2. Specify the relationship in the Relationship List box.
3. Change the type of relationship using the Positioning Relationship box as needed.
Set positioning relationships for equipment (on page 207)
Set positioning relationships for designed equipment
You can remove relationships by clicking Delete Relationship on the ribbon.
This step is often necessary when moving previously constrained equipment. After a
relationship is deleted, no connectivity remains between the two pieces of equipment during
further design operations.

Select Equipment Dialog Box

Specifies the equipment needed for placement. This dialog box appears automatically when you
click the Place Equipment command. By browsing through the part hierarchy, you can find
any piece of equipment in the Catalog database. After you select a piece of equipment and click
OK, the Equipment Properties dialog box appears so that you can define properties for the
new equipment. After you click OK on the Properties dialog box, the software returns you to the
model so that you can finalize configuration and placement.

Save
This option is unavailable.

Cut
This option is unavailable.
Copy
This option is unavailable.

Intergraph Smart® 3D Electrical User's Guide 211

 Place Equipment

Paste
This option is unavailable.
Delete
This option is unavailable.
Refresh
This option is unavailable.

Insert Row
This option is unavailable.

Move Up
This option is unavailable.
Move Down
This option is unavailable.
Properties
Displays the equipment properties as defined in the catalog.
Preview
Displays a bitmap symbol of the selected equipment. The image file must be assigned to the
equipment in the catalog reference data.
Filter
This option is unavailable.
Sort
This option is unavailable.
Customize Current View
This option is unavailable.
List View
Sets the dialog box to display equipment in a list view.

Grid View
Sets the dialog box to display equipment in a spreadsheet-style grid view.
Back
Returns you to the previously selected equipment part or node. Use this command to
navigate through the equipment hierarchy to the specific part you need.
Forward
Sends you to the last selected equipment part or node that you moved away from by using
the Back button. Use this command to navigate through the equipment hierarchy to the
specific part you need.

Intergraph Smart® 3D Electrical User's Guide 212

 Place Equipment

Up One Level
Brings up the next highest level of the Equipment catalog hierarchy. Use this command to
navigate through the equipment hierarchy to the specific part you need.
Check Data
This option is unavailable.
Check Data Ignored Inconsistencies
This option is unavailable.
Help
Displays on-line help for Equipment and Furnishings.
Address
Specifies your exact location within the displayed hierarchy.

Equipment Properties Dialog Box

Displays equipment properties for review and editing.
See Also
Occurrence Tab (Equipment Properties Dialog Box) (on page 213)
Definition Tab (Equipment Properties Dialog Box) (on page 223)
Connection Tab (on page 223)
Relationships Tab (on page 300)
Configuration Tab (on page 290)
Notes Tab (on page 299)
Edit Equipment Properties (on page 210)
Edit Equipment Relationships (on page 211)

Occurrence Tab (Equipment Properties Dialog Box)

Displays all the editable instance-specific information about the selected equipment object. The
property name appears on the left side of the grid and the corresponding property value appears
on the right side of the grid. If more than one equipment object is selected, only the common
occurrence properties for the selected objects appear on the tab.
When viewing properties for a single equipment object, the following properties appear. More
properties may appear depending on what you defined in the reference data. For more
information about occurrences defined in the reference data, see the Equipment and
Furnishings Reference Data Guide available with the Help > Printable Guides command in the
software.
Because equipment properties are customizable in the equipment and furnishings
reference data, only the properties that are required by the software are documented.
Show Dimensional Legend
Displays the bitmap image associated with the equipment object if it has been defined in the
reference data. The image displays in a separate window.

Intergraph Smart® 3D Electrical User's Guide 213

 Place Equipment

Category
Select the properties to view, modify, or define. Equipment properties are divided into
several different categories: Standard, Position and Orientation, Insulation and Tracing,
Weight and CG, Equipment Dimension, Fabrication and Construction, Surface
Treatment and Coating, and Responsibility.

Standard
Name
Displays the name of the equipment object. The equipment name is based on the Name
Rule selection. If you type a name in this field, the Name Rule property updates to User
Defined.
Name Rule
Specify the naming rule to use to name this equipment object. You can select one of the
listed rules or select User Defined to specify the equipment name yourself in the Name box.
Description
Specifies a description for the object.
System
Select the system to which the object belongs. By default, the model is the parent system for
the object. If a parent system is selected when you start the command, System is
automatically updated with the selected system. If multiple systems are selected when you
start the command, System is automatically updated with the last used system.
Reporting Requirements
Specifies the reporting requirement for the object. To change the options on the list, edit the
Reporting Type select list in Catalog.
Reporting Type
Specifies the type of reporting. To change the options on the list, edit the Reporting Type
select list in Catalog.
Correlation Status
Specifies whether the object has been correlated to an object in a P&ID. The list is defined
by the EFWCorrelationStatus select list.
Correlation Basis
Specifies whether the object is correlated to a P&ID object. The list is defined by the
EFWCorrelationBasis select list.
Correlate Object indicates that the object has a correlating object in a P&ID.
No correlation is required indicates that the object does not have a correlating object in a
P&ID.
Correlation Approval Status
Specifies whether the object is approved with discrepancies in the three-dimensional data
compared with design basis data. The list is defined by the EFWCorrelationApprovalStatus
sheet in the AllCodelist workbook.
Topology mismatch approved indicates that the object topology mismatch can be ignored.

Intergraph Smart® 3D Electrical User's Guide 214

 Place Equipment

Data and Topology mismatches approved indicates that the object data and topology
mismatches can be ignored.
None indicates that you do not approve a mismatch.

Position and Orientation

East
Displays the distance of the connection point from the active coordinate system origin in the
east direction.
North
Displays the distance of the connection point from the active coordinate system origin in the
north direction.
Elevation
Displays the distance of the connection point above or below the active coordinate system
origin.
Bearing
Specifies the bearing angle for the object. The Bearing angle is measured between the
local x-axis of the object and the Y-axis (North) of the global coordinate system in the XY-
plane. The local x-axis is the default axis of primary symmetry for all symbols in the catalog.
The bearing measurement direction is clockwise from the active coordinate system North
looking in the negative active coordinate system direction; that is, down from 0 to 360
degrees. You can enter negative bearing angles, but the software automatically converts
them to the positive equivalents. If the pitch is set to +/- 90 degrees, then the bearing
measure displays 0 degrees.

Pitch
Specifies the pitch angle for the object. The Pitch angle measures between the x-axis of the
object and the X-axis of the global coordinate system in the XZ-plane. This option sets the
reference in the model to a line that is the intersection of the vertical plane through the X-
axis of the local coordinate system and the active coordinate system horizontal plane. The
angle is measured in the positive direction from the horizontal plane in the active coordinate
system up direction regardless of the current bearing. Another way to describe pitch is the
rotation of the object about its y-axis. Pitch angles are limited to between -90 degrees and

Intergraph Smart® 3D Electrical User's Guide 215

 Place Equipment

+90 degrees, with 0 indicating horizontal.

Roll
Specifies the roll angle for the object. The Roll angle measures between the local z-axis of
the object and the Z-axis of the global coordinate in the YZ-plane. Another way to describe
roll is the rotation of the object about its x-axis. This option sets the reference in the model to
a line that is perpendicular to the local coordinate system x-axis and in the horizontal plane.
Roll angles are measured clockwise from horizontal to the y-axis of the local coordinate
system. The roll angle is between 0 and 360 degrees. You can enter negative roll angles,
but the software automatically converts them to the positive equivalents. If the pitch is set to
+/- 90 degrees, then the reference in the model is the North axis.

Intergraph Smart® 3D Electrical User's Guide 216

 Place Equipment

Insulation and Tracing

Is Insulated
Indicates whether the object is insulated.
Thickness
Specifies the thickness of the insulation.
Piping - If you selected Not Insulated in the Insulation Specification box, you cannot
change the value in the Insulation Thickness box. However, if you manually entered the
insulation specification, you must provide a corresponding insulation thickness value as per
the specification. If you selected an insulation specification from the available list, the
software automatically displays the corresponding thickness value as per the specification.
HVAC - If you selected Not Insulated in the Insulation Material box, this property is
unavailable.
Requirement
Specifies the requirement of the insulation. To change the options on the list, edit the
Insulation Purpose select list in Catalog.
Insulation Type
Specifies the type of the insulation. To change the options on the list, edit the Insulation
Purpose select list in Catalog.
Insulation Purpose
Displays the purpose of the insulation. If Insulation Specification is set to use the
insulation defined by the equipment object, the information in this box cannot be changed.
However, if Insulation Specification is manually defined, select the purpose of the
insulation in this box. Available purposes are read from the reference data.
Material
Specifies the material of the insulation. If Insulation Specification is set to use the
insulation defined by the equipment object, this field cannot be changed. However, if
Insulation Specification is manually defined, select the insulation material from those
available from the reference data.
The list contains the last five insulation materials selected. Click More to browse the catalog
for the insulation material to use. If you set this field to Not Insulated, the Insulation
Thickness field is disabled. If you set this field to Use Run Material, the along leg feature
inherits the insulation material from the duct run.
To change the options on the list, edit the Insulation Material select list in Catalog.
Operating Temperature
Specifies the operating temperature.
Insulation Surface Area
Specifies the measurement of the surface area of insulation.
Heat Tracing Requirement
Indicates whether the equipment is heat-traced. To change the options on the list, edit the
Heat Tracing Medium select list in Catalog.
Heat Tracing Type

Intergraph Smart® 3D Electrical User's Guide 217

 Place Equipment

Specifies the type of heat-tracing. To change the options on the list, edit the Heat Tracing
Medium select list in Catalog.
Heat Tracing Medium
Specifies the heat-tracing medium to apply to the object. To change the options on the list,
edit the Heat Tracing Medium select list in Catalog.
Heat Tracing Medium Temperature
Specifies the temperature of the heat-tracing medium. Include the unit of measurement of
temperature (K for Kelvin, F for Fahrenheit, or C for Celsius, for example).

Weight & CG
Displays the center-of-gravity and the weight of the selected equipment objects. The center-of-
gravity locations are displayed in global system coordinates along the X-, Y-, and Z-axes. The
software includes the insulation weight in the calculated weight. If you specify the weight
yourself, you must include the insulation weight value.
Dry Weight
Specifies the dry weight of the object.
Wet Weight
Specifies the wet weight of the object.
For equipment, the Weight and CG property Wet Weight is the sum of Dry
Weight and Water Weight. The dry weight and water weight values are catalog properties
entered on the part sheet for the equipment.
Dry CGX
Specifies the X-axis location of the dry center-of-gravity.
Dry CGY
Specifies the Y-axis location of the dry center-of-gravity.
Dry CGZ
Specifies the Z-axis location of the dry center-of-gravity.
Wet CGX
Specifies the X-axis location of the wet center-of-gravity.
Wet CGY
Specifies the Y-axis location of the wet center-of-gravity.
Wet CGZ
Specifies the Z-axis location of the wet center-of-gravity.

Intergraph Smart® 3D Electrical User's Guide 218

 Place Equipment

Equipment Dimension
Property
Displays the name of the property. The properties that appear are dependent on the
equipment type selected. For example, the properties displayed for an equipment object
based on a pump are different from those based on a cooler. For more information on
equipment part properties, see the Equipment and Furnishings Reference Data Guide,
available with the Help > Printable Guides command within the Equipment and
Furnishings task.
Value
Displays the value of the corresponding property.

Fabrication and Construction

Fabrication Requirement
Specifies the fabrication requirement for the object. To change the options on the list, edit
the Fabrication Type select list in Catalog.
Fabrication Type
Specifies the type of fabrication for the object. To change the options on the list, edit the
Fabrication Type select list in Catalog.
The glyph indicates that the fabrication type for the part is determined by the
specification. The glyph is not visible after you modify the fabrication type.
Construction Requirement
Specifies the construction requirement for the object. To change the options on the list, edit
the Construction Requirement select list in Catalog.
Construction Type
Specifies the type of construction for the object. To change the options on the list, edit the
Construction Type select list in Catalog.

Surface Treatment and Coating

Exterior Coating Requirement
Specifies the coating requirement for the object. To change the options on the list, edit the
Coating Type select list in Catalog.
Exterior Coating Type
Specifies the type of coating for the object. To change the options on the list, edit the
Coating Type select list in Catalog.
Coating Color
Specifies the color of the object coating. To change the options on the list, edit the Coating
Color select list in Catalog. Smart 3D includes this property in the painting area report.
Exterior Coating Area
Specifies the area of the coating for the object.

Intergraph Smart® 3D Electrical User's Guide 219

 Place Equipment

Responsibility
Cleaning Responsibility
Specifies the party responsible for cleaning the object. To change the options on the list, edit
the Cleaning Responsibility select list in Catalog.
Design Responsibility
Specifies the party responsible for designing the object. To change the options on the list,
edit the Design Responsibility select list in Catalog.
Fabrication Responsibility
Specifies the party responsible for fabricating the object. To change the options on the list,
edit the Fabrication Responsibility select list in Catalog.
Installation Responsibility
Specifies the party responsible for installing the object. To change the options on the list,
edit the Installation Responsibility select list in Catalog.
Painting Responsibility
Specifies the party responsible for painting the object. To change the options on the list, edit
the Painting Responsibility select list in Catalog.
Requisition Responsibility
Specifies the party responsible for ordering the object. To change the options on the list, edit
the Requisition Responsibility select list in Catalog.
Supply Responsibility
Specifies the party responsible for delivering the object. To change the options on the list,
edit the Supply Responsibility select list in Catalog.
Testing Responsibility
Specifies the party responsible for testing on the object. To change the options on the list,
edit the Testing Responsibility select list in Catalog.
See Also
Equipment Properties Dialog Box (on page 213)

Select Insulation Material Dialog Box

Specifies the insulation materials for a selected object. By browsing through the part hierarchy,
you can find and select an insulation material in the Catalog database.

Save
This option is unavailable.

Cut
This option is unavailable.
Copy
This option is unavailable.

Intergraph Smart® 3D Electrical User's Guide 220

 Place Equipment

Paste
This option is unavailable.
Delete
This option is unavailable.
Undo
This option is unavailable.

Insert Row
This option is unavailable.

Move Up
This option is unavailable.
Move Down
This option is unavailable.
Properties
Displays the properties of the selected object. Because you cannot modify any properties
until the object is placed, all properties on the Properties dialog box are read-only.
Preview
Displays a bitmap symbol of the selected object. The image file must be assigned to the
object in the catalog reference data.
Filter
This option is unavailable.
Sort
This option is unavailable.
Customize Current View
This option is unavailable.
List View
Sets the dialog box to display insulation thickness values in a list view.

Grid View
Sets the dialog box to display insulation thickness values in a spreadsheet-style grid view.
Back
Returns you to the previously selected insulation material folder. Use this command to
navigate through the hierarchy to the specific insulation material you need.
Forward
Sends you to the last selected insulation material folder that you moved away from by using
the Back button. Use this command to navigate through the hierarchy to the specific
insulation material you need.

Intergraph Smart® 3D Electrical User's Guide 221

 Place Equipment

Up One Level
Brings up the next highest level of the hierarchy. Use this command to navigate through the
hierarchy to the specific material you need.
Check Data
This option is unavailable.
CheckData Ignored Inconsistencies
This option is unavailable.
Smart 3D Help
Opens help.
Address
Sets the current location within the hierarchy of available insulation materials. The dropdown
box lists the folders you have visited.

Intergraph Smart® 3D Electrical User's Guide 222

 Place Equipment

Definition Tab (Equipment Properties Dialog Box)

Displays the part information for the equipment object, the properties and their values, as
defined in the reference data. If more than one equipment object is selected, only the common
properties for the selected objects display on the tab. For more information about the information
defined in the reference data, see the Equipment and Furnishings Reference Data Guide,
available from the Help > Printable Guides command in the software.
Category
Select the properties to review. Equipment information is divided into several different
categories, such as Standard, Equipment Specification, Equipment Support, Nozzle
Length, and Equipment Dimensions.
Not all categories are available for all equipment objects.
Property
Displays the name of the property. The properties that appear are dependent on the
equipment type selected. For example, the properties displayed for an equipment object
based on a pump are different from those based on a cooler. For more information on
equipment part properties, see the Equipment and Furnishings Reference Data Guide,
available with the Help > Printable Guides command within the Equipment and Furnishings
task.
Value
Displays the value of the corresponding property.

Connection Tab
Displays information on the connection points of a piece of equipment, including piping,
electrical, foundation, or HVAC connections, and Reference 3D objects. If more than one
equipment object is selected, only the common properties of the connections for the selected
objects display on the tab. For more information about the information defined in the reference
data, see the Equipment and Furnishings Reference Data Guide, available from the Help >
Printable Guides command in the software.
Connector
Select the connector for which to view properties. With the exception of Reference 3D object
connectors, the connectors display in alphabetical order. When you select a connector from
the list, the graphic object associated with the connection, if one exists, highlights in the
graphic view for further visual confirmation of the port selected.
Property
Lists all the properties of the selected connection. These properties vary depending on the
type of connection selected.
Value
Displays the value of the corresponding property.

Intergraph Smart® 3D Electrical User's Guide 223

 Place Equipment

Insulation Tab
Displays insulation properties that have been defined for the selected equipment.
Insulation Specification
Specifies whether the selected equipment object is insulated. The options on this dialog box
remain disabled unless User Defined is selected from the dropdown list.
Purpose
Specifies the insulation purpose for the selected equipment object.
Material
Displays the Select Insulation Material dialog box from which you can specify an insulation
material. For more information, see Select Insulation Material Dialog Box (on page 96).
Thickness
Defines the thickness of the specified insulation material. This option remains disabled until
a material is selected from the Select Insulation Material dialog box. By default, the
smallest thickness value of the selected material is displayed. An alternative value may be
selected from the dropdown list.
See Also
Equipment Properties Dialog Box (on page 213)

Intergraph Smart® 3D Electrical User's Guide 224

SECTION 10

Cables
You can create cables and then route those cables through existing conduit and cableway. You
can:
▪ Assign cable properties
▪ Automatically route cable
▪ Edit cable routes including the ability to define where cables enter and exit cable tray
▪ Insert cable markers and generate a report of the cable route by marker name

Create Cables
You can create cables by defining the name, part number, and equipment to which the cable is
connected. For example, you can choose an electrical cabinet and a pump to connect with cable
in the model.
You can create parallel cables, if needed. The software creates a parent object called a parallel
cable, and children objects called paralleled cables. The paralleled cables have the same part
number, have the same entry and exit points into and out of the cableway, and follow the same
path in the cableway. The following graphic shows the parallel cable hierarchy in the
Workspace Explorer.

For more information on creating cables, see Insert Cable (on page 229).

AutoRoute Cable
You can automatically route cables using AutoRoute on the Edit Cable Path ribbon. After a
cable is created, you can use Edit Cable Path to access the autorouting functionality.
Autorouting determines the shortest path from the starting point to the ending point on the cable
tray or conduit and routes the cable accordingly. You must define signal types for the cable trays
and conduits to autoroute cables. You can modify the assigned autorouted path, if necessary, by
specifying additional must-include cable trays for the selected cable.
During the auto route process, the software also considers the cable tray fill requirement. You
can choose to allow overfilling of the cable trays or to allow real-time fill calculations during the
routing process. For more information about using the autorouting functionality, see AutoRoute
(on page 245).

Edit Cable Path

After the software automatically routes the cable, you can edit the cable path so that the cable
runs through the proper cable trays. You need to define the cable entry point into the cableway

Intergraph Smart® 3D Electrical User's Guide 225

 Cables

system, the cableways and conduit that the cable is to go through, and the cable exit point from
the cableway system. If you do not have conduit and cableways in your model, use the Route
Conduit and Route Cableway commands to create them.
As you route a cable, you can view the maximum fill capacity for the cable tray or conduit in the
MaxFill box on the ribbon. If you click MaxFill, the software highlights the corresponding tray or
conduit containing the maximum fill. You can use surface style rules to show which cable trays
are full and which ones are nearly full. You can also run a cable fill report for cable tray or
conduit.
The software also calculates the maximum fill during the autorouting process. You can allow
overfilling of the cable trays or allow real-time fill calculations during the routing process.
Fill calculations are based on the National Electrical Code (NEC) standard. The
software performs the calculations using Microsoft Visual Basic module, which can be
customized based on the requirements of a given project. For more information about editing
cable paths, see Edit Cable Path (on page 236).

Place Cable Marker

After you route cables, you can place markers on cableway or conduit features to designate the
path of the cables. You can later generate a report on the paths and use the information as
required. For more information about placing cable markers, see Insert Cable Marker (on page
249).

Intergraph Smart® 3D Electrical User's Guide 226

 Cables

Routing Cable Example

When routing cable manually, you might want to route a cable into a cable tray at some point
along the tray's length. For example, the cable needs to exit a conduit and then enter a cable
tray.
You can specify an entry point or exit point anywhere along a cable tray using Set Entry Point
or Set Exit Point on the ribbon. PinPoint can be used to assist in precise
placement.

For example, if you branch the conduit out of the tray using Route Conduit , the software
creates a connection between the conduit and cableway features. Then, when routing the cable,
you need to select the cableway that owns the tray, and then do the same for the conduit run in
the Select Way Features step. The software recognizes the connection between the cableway
and conduit runs, and routes the cable through them.
There is no need to route cable in any specific order. You can pick whatever step you want to
start the process and then come back to it later, if required. Incomplete routes can be saved and
finished later. Additional cables can even be added while routing. When you click Finish, the
runs are saved.

Routing Cable in Disconnected Networks

The following information concerns the connectivity of cable tray networks and how the
connectivity affects a cable route.
When you route cable, the cable makes a jump from the From Device to the Entry Point and a
jump from the To Device to the Exit Point, following an orthogonal path in both cases. The
software does not jump between disconnected cable trays or conduit runs. A connection is
required between the conduit feature and the cable tray feature. Without the connection, the
software does not know to trim the path at that branch.
Where there are gaps between cable tray runs, you should route zero spec cableway (Cws-0).
With this spec, no parts are created – only space is reserved. However, the software still makes
connections that cable routing will recognize. Hence, you can fill in gaps with this spec and allow
the cable routing to have a contiguous network through which to route.
Using zero-spec cableway, a cable path can be routed across a variety of gap conditions.
▪ A tight radius turn for which no elbow has been placed
▪ A longer radius turn
▪ A gap between two trays in the same plane
▪ A gap between a horizontal and vertical tray
The following pictures show a disconnected cable tray network. The cable appears to jump over
the gaps. Actually, the cable trays are connected using zero-spec cableway, which is hidden in
the first picture (and shown in the second picture). The cable path is complete and gives good
data as a result.

Intergraph Smart® 3D Electrical User's Guide 227

 Cables

▪ Exit points for cable can be placed anywhere along a tray. A cable can leave a tray at any
point, connecting to an equipment or instrument.
▪ To check the validity of a cable, open the Properties dialog box for the cable, and go to the
Occurrence tab. The Route Status value will be Incomplete or Undefined if the cable is
routed through a non-contiguous network. In this case, the lengths cannot be relied upon,
and the data is not valid.
▪ Zero-spec cableway is used in interference detection to assure there is space for the cables
to make the jump across gaps in the tray network.

Intergraph Smart® 3D Electrical User's Guide 228

 Cables

Routing Cables in Cable Tray with Barriers

Adding barriers to cable tray with cables
You can add barriers to a cable tray that already has cables of different signal routed through it.
When you add barriers and assign required signal types to the partitions, the software
automatically routes the cables in partitions based on their signal type. You need not manually
assign cables to respective partitions.
For example, a cable tray has Communication, Control, and Power cables routed through it.
When you create three partitions out of the cable tray, the software automatically routes the
control cable in partition assigned with Control signal type and so forth based on their signal
type.

Deleting a partition with cables

If you delete a partition with cables, the software deletes that partition and unroutes the
associated cables. The Route status of the cable is set to incomplete. For information on how
to delete a cable tray partition, see Delete a cable tray barrier (on page 49).

Converting a cable tray with barriers to a cable tray

To convert a cable tray with barriers to a cable tray, you should delete all the partitions. If you
delete all the partitions, the software unroutes the associated cables except the cables in the
remaining partition. The software renders the last remaining partition into a cable tray, and the
signal type of that partition is assigned to the cable tray. For information on how to delete a
cable tray partition, see Delete a cable tray barrier (on page 49).

Insert Cable
Creates a new cable run in the model. When you add a cable run, you define the properties
of the cable run and define the relationship of the cable run to other objects in the model, such
as electrical cabinets and equipment.
You can create parallel cables, if necessary, by entering a number greater than 1 for the parallel
cables property. The software creates a parallel cable (parent) and multiple paralleled cables
(children).
After you insert a cable, the Edit Cable Path ribbon becomes available. For more information
about this ribbon, see Edit Cable Path (on page 236).

What do you want to do?

▪ Create a cable (on page 229)
▪ Copy a cable run (on page 231)

Create a cable
1. Click Insert Cable .

Intergraph Smart® 3D Electrical User's Guide 229

 Cables

The Cable Properties dialog box displays.

2. In the System box, select a system for the cable. Select More to select a system from the
workspace or database.
3. In the Name box, type a name, or select DefaultNameRule in the Name Rule box.
4. In the Parallel Cables box, specify an integer greater than 1, if you want to create parallel
cables. For example, if you enter 2, the software creates two paralleled cables (children)
with a parent parallel cable object.
5. In the Signal Type box, choose a type for the cable.
6. In the Part Number box, click More to browse the catalog for a cable.
7. In the Select Part Number dialog box (on page 232), select a cable from the catalog.
8. Click OK.
9. In the Originating Device box, define the originating device connection.
10. In the Terminating Device box, define the terminating device connection.

▪ The originating and terminating devices can be the same or different pieces of
equipment.
▪ If a piece of equipment has a cable port, the Receptacle, Terminal, Connector, and
Backshell (or a combination of these) values for the equipment are available for
selection.
11. To continue entering cables, click Apply and then click Insert Next Cable.
12. Click OK to create the cable, and then dismiss the dialog box.

▪ After you create a cable and click OK, you can edit the cable path in the model. Click Set
Entry Point on the ribbon, and follow the prompts on the status bar.

▪ You can specify automatic cable routing. Click AutoRoute on the ribbon that appears
after you create a cable. Autorouting places the cable based on the shortest path between
the starting point and the ending point on the cable tray.

Intergraph Smart® 3D Electrical User's Guide 230

 Cables

Copy a cable run

1. Click Select .
2. In the Locate Filter box, select Cables.
3. Select a cable in a graphic view or in the Workspace Explorer.
4. Click Edit > Copy.
5. Click Edit > Paste.
6. On the Paste Special box, define the originating and terminating devices for the cable.

Edit cable properties

1. Click Select .
2. Select Cables in the Locate Filter box.
3. Select the cable run to edit.
4. Click Properties on the ribbon.

Edit parallel cable properties

1. Click Select .
2. Select Parallel Cables in the Locate Filter box.
3. Select the parallel cable to edit.
4. Click Properties on the ribbon.

Edit paralleled cable properties

1. Click Select .
2. Select Cables in the Locate Filter box.
3. Select the paralleled cable to edit.
4. Click Properties on the ribbon.

Delete a cable run

1. Click Select .
2. Select Cables in the Locate Filter box.
3. Select the cable run to delete.
4. Click Delete .

Delete a parallel cable

1. Click Select .

Intergraph Smart® 3D Electrical User's Guide 231

 Cables

2. Select Parallel Cables in the Locate Filter box.

3. Select the parallel cable to delete.
4. Click Delete .
All the paralleled cables (children) are deleted as well.

Delete a paralleled cable

1. Click Select .
2. Select Cables in the Locate Filter box.
3. Select a paralleled cable to delete.
4. Click Delete .
This delete operation does not affect the paralleled cable's parent or siblings.

Select Part Number Dialog Box

Allows selection of the type of cable to be placed. This dialog box appears when you click More
on the Part Number option. By browsing through the hierarchy, you can find any cable part in
the Catalog database.
Back
Returns you to the previously selected cable type or node. Use this command to navigate
through the hierarchy to the specific type that you need.
Forward
Sends you to the last selected cable type or node that you moved away from by using the
Back button. Use this command to navigate through the hierarchy to the specific type that
you need.
Up One Level
Brings up the next highest level of the catalog hierarchy. Use this command to navigate
through the hierarchy to the specific type that you need.
Copy
Copies the selected object. This command is available only in the Catalog task.
Paste
Pastes a copied object. This command is available only in the Catalog task.
Delete
Deletes the selected object. This command is available only in the Catalog task.
Undo
Reverses the most recent operation. This command is available only in the Catalog task.

New Object
Creates a new object. This command is available only in the Catalog task.

Move Up

Intergraph Smart® 3D Electrical User's Guide 232

 Cables

Moves up one object. The level in the hierarchy remains the same.
Move Down
Moves down one object. The level in the hierarchy remains the same.
Properties
Displays the properties of the selected cable type. Because you cannot modify any
properties until the cable type is placed, all properties on the dialog box are read-only.
Preview
Displays a picture of the selected cable type. The image file must be assigned to the cable
type in the reference data.
List View
Sets the dialog box to display cable types in a list view.

Grid View
Sets the dialog box to display cable types in a spreadsheet-style grid view.
Check Data
Checks the consistency of the data in the grid against other data in the Catalog. This
command is available only in the Catalog task.
Address
Specifies your exact location within the displayed hierarchy.

Intergraph Smart® 3D Electrical User's Guide 233

 Cables

Cable Properties Dialog Box

Displays cable properties for review and editing.
The Parallel Cable and Paralleled Cable tabs appear if you have created parallel cables. The
Parallel Cable tab is for the parent cable object, and the Paralleled Cable tab is for a child
cable.
See Also
Configuration Tab (on page 290)
Edit Cable Properties (on page 231)
Edit Parallel Cable Properties (on page 231)
Edit Paralleled Cable Properties (on page 231)
Insert Cable (on page 229)
Relationships Tab (on page 300)
Route Tab (Cable Properties Dialog Box) (on page 235)
Parallel Cable Tab (Cable Properties Dialog Box) (on page 234)
Paralleled Cable Tab (Cable Properties Dialog Box) (on page 234)

Parallel Cable Tab (Cable Properties Dialog Box)

The Parallel Cable tab displays the object properties as they are defined in the reference data.
The property name appears on the left side of the grid and the corresponding property value
appears on the right side of the grid. If you selected more than one object and then selected the
Properties command, only the common properties between the selected objects display.
The properties that appear depend on what you defined in the reference data. For more
information on the properties, refer to the Electrical Reference Data Guide available from the
Help > Printable Guides command in the software.
See Also
Edit Properties (on page 53)

Paralleled Cable Tab (Cable Properties Dialog Box)

The Paralleled Cable tab displays the object properties as they are defined in the reference
data. The property name appears on the left side of the grid and the corresponding property
value appears on the right side of the grid. If you selected more than one object and then
selected the Properties command, only the common properties between the selected objects
display.
The properties that appear depend on what you defined in the reference data. For more
information on the properties, refer to the Electrical Reference Data Guide available from the
Help > Printable Guides command in the software.
See Also
Edit Properties (on page 53)

Intergraph Smart® 3D Electrical User's Guide 234

 Cables

Route Tab (Cable Properties Dialog Box)

Displays the route of the cable run. This tab is only available if the cable has been routed.
Method
Specify how you want to view the cable run route.
▪ Cableways - Lists all the cableway junctions that the cable run passes through. The
cableway junctions are named after the cableway or conduit run names and the end of
the cableway or conduit run that the cable run passes.
▪ All Hangers - Lists all hangers supporting the cableways that the cable run route
passes through.
▪ Key Hangers - Lists only the hangers that are closest to the entry and exit points and
any branch points.
▪ Markers - Lists the cable markers on the cable run.
Name
Displays the name of the object.
Location X
Displays the X-coordinate location of the hanger, marker, and cableway junction in the
active coordinate system.
Location Y
Displays the Y-coordinate location of the hanger, marker, and cableway junction in the
active coordinate system.
Location Z
Displays the Z-coordinate location of the hanger, marker, and cableway junction in the
active coordinate system.
Distance
Displays the distance from where the cable run enters the cableway system to the hanger.
The distance is measured along the centerline of the cableway and includes any tail 1 length
that was specified at creation.
See Also
Cable Properties Dialog Box (on page 234)

Intergraph Smart® 3D Electrical User's Guide 235

 Cables

Edit Cable Path

Routes cables through connected cableways and conduits. You can define the path of a
cable path by either manually selecting the entire path or by automatic calculation of the shortest
route that meets your predefined criteria (cableway signal types, way-features, avoidance
features, entry and exit points).
To define the path manually, select the entry point, the way features through which the cable
should pass, and then the exit point.
To define the path automatically, you need to optionally define the required entry/exit points, the
way-features (branch features the route must go through), and the avoidance features (straight
features the route must avoid). Then click AutoRoute , and the software finds the shortest
route.

▪ The cable must exist in the model before you can define the path. Use Insert Cable to
create cables.
▪ The cableways and conduit that the cable routes through must be connected. Cables cannot
jump between unconnected cableways/conduits. To place cableways and conduits, use the
Route Cableway and Route Conduit commands.
▪ A way feature represents combination of way node and way path through which you route
the cable.
▪ Way node is along-leg feature or a feature that has branch.
▪ Way path is a straight, turn or transition feature.

Edit Cable Path Ribbon

Sets options for routing cables.

Property Page
Displays the Cable Properties dialog box. For more information, see Cable Properties
Dialog Box (on page 234).

Cable List
Displays a dialog box that lists all the defined cables in the model. To define a cable, click
Insert Cable .
Select Cable(s)
Select one or more cables to edit the path. For manual routing, all selected cables follow
the same path. For autorouting, the shortest path that meets your criteria is found
independently for each selected cable
Set Entry Point
Identify the entry point into the cableway for the cable path near the originating device. This
point must be either at an end feature of a conduit or cableway or a point along a cableway

Intergraph Smart® 3D Electrical User's Guide 236

 Cables

straight feature, along leg feature, or turn feature. This option is required for manual routing
and optional for autorouting.

Select Way Features

Select the cableway and conduit straight features, branch, turn features except end
features, in the order (from entry to exit) that you want the cable to run through. When you
select a straight feature, the software extends the selection along the cableway header. You
select another straight feature at each branch that you want the route to take. Selecting a
currently selected way feature de-selects that feature. You only have to select a few way
features to get a path that deviates from the ideal shortest route as your design conditions
require. When you select a cable that has been autorouted, you can click Select Way
Features to review the way features you previously selected and edit their order. See Show
Order of Way Features below for more information.
Select Avoidance Features
Select the cableways and conduit straight features through which the cable cannot pass.
This option is only used when autorouting. Although this option is sometimes useful to
quickly define the required route, Avoidance features are not stored with the resulting cable
route for later possible re-route of the cable as are way-features. As such, it is more
effective to use way-features.
Set Exit Point
Identify the exit point from the cableway for the cable path near the terminating device. This
point must be either at an end feature of a conduit or cableway or a point along a cableway
straight feature, along leg feature, or turn feature.
Finish
Saves the cable route as defined to the database.
Reject Selection
Rejects the selected object.
Accept Selection
Confirms the selected set of objects.

Delete Path Selection

Deletes the currently defined paths of the selected cables.

AutoRoute
Automatically routes each selected cable through the shortest path that has the required
signal type and meets the currently defined entry/exit points, way-features, and/or avoidance
features. If the autoroute produces unexpected results, ensure that the following conditions
exist:
▪ The allowed signal types defined for the cableways include the cable signal type.
▪ The cableways are connected. Verify that you have branch features at branch points.
▪ The equipment is within your required range from the cableways. For more information,
see AutoRoute Options Dialog Box (on page 246).
▪ The way features that you have selected are in an order from the entry to the exit that is
possible.

Intergraph Smart® 3D Electrical User's Guide 237

 Cables

▪ The selected way features do not exceed 100.

▪ The selected way paths do not exceed 20.

Partial Autoroute
Reroutes a selected portion of an already autorouted cable, keeping the rest of the cable
path unchanged.

AutoRoute Options
Specifies autorouting options. The software allows either overfilling of cableways or real-
time fill calculations among other options. For more information, see AutoRoute Options
Dialog Box (on page 246).
Show Order of Way Features
Activates the Order of Way Features dialog box, which displays the originating and
terminating devices for the cable and the order of the way features that the cable will pass
through when autorouted. By default, the software finds the shortest path through all the
way features. If the shortest path is not appropriate, you can re-order the way features using
Show Order of Way Features. Open the dialog box and click OK to confirm that the
selected order should be considered for auto-routing. Otherwise, the software picks the path
through the selected way features. In this case, the order is decided by the software.
System
Defines the parent system for the cable.
Cable name
Displays the name of the cable.

What do you want to do?

▪ Edit cable path manually (on page 239)
▪ Set avoidance zones (see "Set avoidance features" on page 242)
▪ Set way features (on page 242)
▪ Copy cable path (on page 243)
▪ Order features for autorouting cable (on page 243)
▪ Re-route part of a path (on page 244)

Intergraph Smart® 3D Electrical User's Guide 238

 Cables

Edit cable path manually

1. Click Edit Cable Path .
2. On the Cable Selection dialog box (on page 245), select a cable to edit.

The current cable path appears highlighted in white in the model.

3. Click Accept to confirm that you want to edit the path for this cable.
4. Select an entry point for the cable on cable tray or conduit.

Intergraph Smart® 3D Electrical User's Guide 239

 Cables

5. Select the conduit and cable trays that you want the cable to run through.

6. Click Accept .
7. Select an exit point for the cable on cable tray or conduit.

8. Click Accept .
9. Click Finish.

▪ For the entry and exit points, you can select a point on a cable tray straight feature, turn
feature, or along-leg feature (including an end feature), a point on a conduit end feature, or a
hanger or support on a cable tray or conduit run.
▪ To aid in selecting hangers, use the SmartSketch3D relationship indicators, or select the
hanger in the Workspace Explorer. You can also use a locate filter to select the straight
features, and then hide the straight features before selecting the hangers.

Intergraph Smart® 3D Electrical User's Guide 240

 Cables

Edit cable path using AutoRoute

1. Click Edit Cable Path .
2. On the Cable Selection dialog box (on page 245), select a cable to edit.

The current cable path appears highlighted in white in the model.

3. Click Accept to confirm that you want to edit the path for this cable.

4. Click AutoRoute on the ribbon.

Autorouting places the cable based on the shortest path between the starting point and the
ending point. Click AutoRoute Options on the ribbon to set options for overfilling.

5. Click Finish.

Intergraph Smart® 3D Electrical User's Guide 241

 Cables

Set avoidance features

1. Click Select .
2. Select Cable in the Locate filter box, and then select a cable in a graphic view or in the
Workspace Explorer.
3. Click Select Avoidance Features , and then select the cableway features through which
you do not want the cable routed.

4. Click AutoRoute .
The cable is routed along the shortest path through features other than the ones selected as
avoidance features. The combination of setting avoidance features and using AutoRoute
constrains the cable to avoid features while choosing the optimum path.

▪ Use avoidance features to ensure that AutoRoute (on page 245) does not route a cable
through specified cableway features. You must have a cable already placed and selected to
open the Edit Cable Path ribbon.
▪ You need not select the entry and exit points because the autoroute feature picks them.
However, if there are any numbers of cableways lying in the maximum tail range of the
equipment, then you might want to select the entry and exit points.
▪ This feature works only with autorouting.

Set way features

1. Click Select .
2. Select Cable in the Locate filter box, and then select a cable in a graphic view or in the
Workspace Explorer.

3. Click Select Way Features , and pick the cableway or conduit features through which
you want the cable routed.

4. Click AutoRoute .
5. Click Finish when you are done.
You can watch the cable passing through the features defined as Way Features.

▪ Use Way Features to ensure the auto route feature routes a cable the way you intend. You
must have a cable already placed and selected to open the Edit Cable Path ribbon.
▪ You need not select the entry and exit points because AutoRoute picks them. However, if
there are any numbers of cableways lying in the Maximum Tail range of the equipment, then
you might want to select the entry and exit points.
▪ A combination of way features and avoidance features can be selected for autorouting
cables.
▪ AutoRoute finds the shortest route that goes through all selected branch features (way-
features) in the order in which they were selected.

Intergraph Smart® 3D Electrical User's Guide 242

 Cables

Copy cable path

1. Click Edit Cable Path .
2. Select the cable with the path that you want to copy.
3. Select the unrouted cable to assign the path to.
4. Click OK to confirm the copy operation.

Order features for autorouting cable

1. Select a cable from Workspace Explorer.
-OR-

Click Edit Cable Path .

2. Select the cables in the Cable Selection dialog box, and click OK.
3. Click Accept to accept the selection.

4. Click Select Way Features and select the cableway or conduit features in the network
through which you want the cable to pass when routed using AutoRoute.

▪ The software finds the shortest path between the entry and exit points, through all the
way features. You can re-order the way features if the autorouted path is not
appropriate.
▪ Do not select more than 100 way features as this can cause AutoRoute to route
inappropriately.
5. Click Show Order of Way Features on the Edit
Cable Path ribbon.
6. In the Order of Way Features dialog box (on page
245), select a feature to re-order.
The feature you select in the dialog box is
highlighted in the graphic view of the software.
7. Click Move Up or Move Down to change the order
of selection.
To remove a selected way feature from
the list, click Remove. This action does not remove
the branch feature from the model.
8. If necessary, select additional way features, and
repeat step 5 until the order is correct.
9. Click OK to save the way features changes or click
Cancel to undo the changes made.

10. Click AutoRoute .

The cable passes through the way features according to the modified order of way features.

Intergraph Smart® 3D Electrical User's Guide 243

 Cables

Re-route part of a path

You can use Partial Autoroute on the Edit Cable Path ribbon to re-route a portion of a
cable that is currently complete. When modifying the way features, do not select straight
features. Select only features with branch points. After you modify the cable path, Partial
Autoroute does not consider straight features but remembers the last saved along-leg features.
The command can modify the selected cable in the following ways:

Partial autoroute between existing entry and exit points

1. Select the cable.

2. Click Partial Autoroute .

The software uses the current entry and exit points and all the way-features that were
selected for the last run of the AutoRoute command to find the shortest path between the
existing entry/exit points.

Partial autoroute between two points on the current path of the cable
1. Select the cable.

2. Click Select Way Features on the Edit Cable Path ribbon.

3. Select a start branch point on the path of the cable, followed by a series of branch points
through which you intend the cable to pass.
4. Select the end branch point on the path of the cable.

5. Click Partial Autoroute .

The software re-routes the cable through the selected branch points, retaining the path
before and after the first and last branch points that you selected.

Partial autoroute between the entry point and a point on the current path of the cable
1. Select the cable.
2. Re-select the entry point on the same straight feature that it was currently on.
3. Select the series of branch points through which you intend the cable to pass.
4. Select the end branch point on the path of the cable.

5. Click Partial Autoroute .

The software re-routes the cable from the entry point through the selected branch points,
retaining the path after the last branch point selected on the path.

Partial autoroute between a point on the current path of the cable and the exit point
1. Select the cable.
2. Re-select the exit point on the same straight feature that it was currently on.
3. Select the series of branch points through which you intend the cable to pass, starting with a
branch point on the path of the cable and in order toward exit point.

4. Click Partial Autoroute .

Intergraph Smart® 3D Electrical User's Guide 244

 Cables

The software re-routes the cable through the selected branch points, retaining the path
before the first branch point selected on the path.

Cable Selection Dialog Box

Displays all the defined cables so that you can select the cable that you want. To define new
cables, use the Insert Cable command. For more information about creating cables, see
Create a cable (on page 229).
See Also
Cables (on page 225)
Copy Cable Path (on page 243)
Edit Cable Path (on page 236)
Routing Cable Example (on page 227)
Routing Cable in Disconnected Networks (on page 227)

Order of Way Features Dialog Box

The Order of Way Features dialog box displays the order of the way features selected through
which a cable is autorouted. Way features are added to this dialog box using the Select Way
Features option on the Edit Cable Path ribbon.
Cables are routed through the way features in the order that they are displayed in the dialog box
(top to bottom). The name of the cable's originating device is displayed at the top of the dialog
box. The cable's terminating device is displayed at the bottom of the dialog box.
Use the Move Up, Move Down, and Remove commands to re-order the way-features as
needed. You can select a way feature in the list to highlight its location in the model. You must
click OK to apply the order changes made to way features. If you do not want the changes to be
applied, then click Cancel or exit the dialog box.
You must order the way features to define an achievable route or the cable
autorouting might fail.
See also
Order Features for AutoRouting Cable (on page 243)
Re-route Part of a Path (on page 244)

AutoRoute
Routes cables using the shortest path from a starting point to an ending point via a cable
tray or conduit. However, you can modify the default behavior using the options available on the
AutoRoute Options Dialog Box (on page 246).

Autorouting is off by default; click AutoRoute on the Edit Cable Path ribbon to activate
autorouting.
For a detailed explanation of the process the software steps through to autoroute
cable in the 3D model, see Appendix: Cable Autorouting (on page 329).

Intergraph Smart® 3D Electrical User's Guide 245

 Cables

AutoRoute Options Dialog Box

Sets options for automated routing. Access these options by clicking AutoRoute Options
on the Edit Cable Path ribbon.
Minimize cable tail lengths
Routes cable such that the cable enters/exits at the nearest entry/exit point available within
the maximum tail range, and the maximum length of the cable remains in the cable tray or
conduit. If you select this option, the software gives priority to the shortest cable tail lengths
than the shortest path.
Allow overfilling of cabletrays
Allows for routing of cables through cable trays that will be overloaded. However, even when
this option is enabled, the software searches for the cable route that will result in the least-
filled condition. By default, this option is selected.
Allow Cables to enter from the Cableway straight feature
Allows cables to enter or exit from a cableway straight feature.
Allow Cable to be routed through Bends with radii less than Minimum Bend Radius of the
Cable
Allows cable routing through bends that have a radius less than the minimum bend radius of
the cable.
Cableway, conduits, or cables have been modified since last auto route
Regenerates new cableway network layout data. If you do not select this option, the
software does not regenerate the data, but uses cableway network data from the last
autorouted cable. By default, this option is selected.
Display range boxes if less than 10 cables are selected
Displays a range box around the cable connection location to the equipment, showing a
graphical representation of the maximum and minimum tail ranges.
Refresh the Fill for Cableways in session from database
Retrieves the last fill for cableways from the database. This option is automatically enabled
when Allow overfilling of cabletrays option is cleared.
Maximum tail range from Originating device
Allows you to set a specific, maximum search distance from the originating device. In
addition, the software computes the shortest cable length for any search results. For
example, if two conduits are the same distance from the cable tail, but one is 3 feet long and
one is 6 feet long, the software connects to the shortest route—in this case, the 3-foot route.
Maximum tail range from Terminating device
Allows you to set a specific, maximum search distance from the terminating device. In
addition, the software computes the shortest cable length for any search results. For
example, if two conduits are the same distance from the cable tail, but one is 3 feet long and
one is 6 feet long, the software connects to the shortest route—in this case, the 3-foot route.

Intergraph Smart® 3D Electrical User's Guide 246

 Cables

Route cables through Electrical Raceway networks in the workspace only

Routes cables through the electrical raceway networks that are available in the Workspace,
rather than through the entire electrical raceways available in the database. Check this
option to route through the raceways available only in the workspace. Clear this option to
include all the electrical raceways in the database.
Enable routing based on Allowable and Avoidance Volumes
Routes cables through allowable volumes avoiding the avoidance volumes. If you check this
option the software routes the cable only in the allowable volumes. However, this path might
not be the shortest path. Clear this option to disable routing based on allowable volumes
rule.
See Also
Cables (on page 225)
Edit Cable Path (on page 236)
Routing Cable Example (on page 227)
Routing Cable in Disconnected Networks (on page 227)

Set View by Cable

The View > Set View by Cable command assists the designer when routing cable by only
showing objects of interest and hiding non-applicable objects in the model. Because routing
cable typically occurs toward the end of the design process, there is a high likelihood that the
model will be crowded. This command:
▪ Hides structural, piping, HVAC, and other objects that the electrical designer is not
interested in.
▪ Hides all equipment not associated with the selected cable.
▪ Displays all conduit and cableways that are in the immediate vicinity of the equipment being
selected. These objects are the most likely to be used for connecting the equipment with
cable.
▪ Displays all conduits and cableways connected to those in the vicinity. As an extra measure
to ensure that a viable cableway or conduit is not left out, the branches are included as well.
▪ Displays all conduits and cableways that the cable currently runs through (if any).
▪ Shows hangers supporting these cableways and conduits. These hangers can be important
reference points during the routing operation.
▪ Automatically zooms to view the volume of interest.

Intergraph Smart® 3D Electrical User's Guide 247

 Cables

Zoom to cable
1. Click Select .
2. Select Cables in the Locate Filter box.
3. Click a cable in a graphic view or in the Workspace Explorer.

4. Click View > Set View by Cable.

The software hides unnecessary objects and zooms to the selected cable.

Intergraph Smart® 3D Electrical User's Guide 248

 Cables

Insert Cable Marker

Places cable markers at points along cable tray or conduit features. You can name the
markers yourself or use a naming rule. After being placed, the cable markers can be used to
describe a cable path on a cable-routing report.

Insert Cable Marker Ribbon

Sets options for inserting cable markers.
Properties
Displays the Cable Marker Properties dialog box. For more information, see Cable Marker
Properties Dialog Box (on page 252).
Select Path Feature
Allows you to select a feature (cableway or conduit) in the model.
Place Marker on Feature
Allows you to click the location where you want the cable marker.
Marker Name
Type a name for the marker.

Edit Cable Marker Ribbon

Displays options for editing a cable marker.
Properties
Displays the Cable Marker Properties dialog box. For more information, see Cable Marker
Properties Dialog Box (on page 252).
Marker Name
Type a name for the marker.
Parent Run
Displays the name of the electrical run (cableway or conduit) associated with the cable
marker.

Intergraph Smart® 3D Electrical User's Guide 249

 Cables

Raceway Part
Displays the cable tray part associated with the cable marker, if applicable.
E
Displays the location of the marker along the E-axis.
N
Displays the location of the marker along the N-axis.
EL
Displays the location of the marker along the EL-axis.

What do you want to do?

▪ Insert a cable marker (on page 250)
▪ Edit cable marker properties (on page 251)
▪ Move a cable marker (on page 252)
▪ Delete a cable marker (on page 252)

Insert a cable marker

1. Click Insert Cable Marker .
2. Select a path feature in the model. You can select cableway or conduit.

Intergraph Smart® 3D Electrical User's Guide 250

 Cables

3. Click the location where you want to place the cable marker.

The cable marker is placed and the software prompts you to select the location for another
cable marker if needed.

4. Right-click to stop placing cable markers on the selected feature.

Edit cable marker properties

1. Click Select .
2. Select Cable Markers in the Locate Filter box.
3. Select the cable marker to edit.
4. Click Edit > Properties or click Properties on the ribbon.

Intergraph Smart® 3D Electrical User's Guide 251

 Cables

Move a cable marker

1. Click Select .
2. Select Cable Markers in the Locate Filter box.
3. Select the cable marker to move.
4. Select Move on the main ribbon.
5. Select a location in the model as the move-from location.
6. Click on the cableway/conduit feature and identify the move-to location.
You can use the Tools > Point Along and Tools > PinPoint commands to help
locate the marker more precisely.

Delete a cable marker

1. Click Select .
2. Select Cable Markers in the Locate Filter box.
3. Select the marker to delete.
4. Click Delete .

Cable Marker Properties Dialog Box

Displays cable marker properties for review and editing.
See Also
Configuration Tab (on page 290)
Edit Cable Marker Properties (on page 251)
General Tab (Cable Marker Properties Dialog Box) (on page 252)
Relationships Tab (on page 300)

General Tab (Cable Marker Properties Dialog Box)

Displays and defines the general properties of the selected cable marker.

Standard
Marker Name
Specifies the name of the cable marker.
Naming Rule
Specifies the name rule used to generate the name. Set this option to User Defined if you
want to specify the name yourself.
Parent Run
Specifies the name of the electrical run (cableway or conduit) associated with the cable
marker.
Raceway Part
Displays the cable tray part associated with the cable marker, if applicable.

Intergraph Smart® 3D Electrical User's Guide 252

 Cables

E
Displays the location of the marker along the E-axis.
N
Displays the location of the marker along the N-axis.
EL
Displays the location of the marker along the EL-axis.
See Also
Cable Marker Properties Dialog Box (on page 252)

Intergraph Smart® 3D Electrical User's Guide 253

SECTION 11

Insert Split
Divides cable tray into sections. Some
examples of splits are splice plates, box
connectors, and bonding jumpers.
After you route cable tray and cableway, you
can insert splits so that the model represents
the lengths of tray available for purchase. Splits
also let you know where hangers and supports
will need to be placed.

The Insert Split command allows you to

divide a length of tray into sections. The
software provides two modes of inserting splits:
1) one split at a time, or 2) many splits at once.
In the multi-split mode, the software places
splits on a straight feature at locations specified
by the purchase length of the tray.
The following picture shows the single-split
mode.
The following picture shows the multi-split mode.

▪ Cable trays with splits can be logically connected with other cable trays of similar cross-
section. They can also logically connect with cableway runs with or without parts.
▪ Cable trays with dividers do not form transitions. The connecting cableways always form the
transition.

Intergraph Smart® 3D Electrical User's Guide 254

 Insert Split

Insert Split Ribbon

Sets options for adding a split to a cable tray.

Select Feature
Selects the cable tray in which you want to insert a split.
Position
Specifies the position of the split along the straight feature. This option is available if you are
working in single-split mode (see Split Mode below), but it is not available if you are working
in multi-split mode.
Finish
Inserts the split.
Section Length
Specifies the purchasable length of the cable tray.
If the length of the selected cable tray straight feature is less than the last-used section
length, then the software sets the section length to half of the straight feature length.
Gap Width
Enter the gap between straight sections. The maximum gap you can define is 2 inches (5
cm). The following picture shows where the gap is placed.

Reference Position
Inserts splits in the selected straight feature starting from Port 1 or Port 2 (either end of the
straight feature).
Split Mode
Specifies the mode for inserting splits.

Intergraph Smart® 3D Electrical User's Guide 255

 Insert Split

▪ Single-Split - Inserts one split at a time.

▪ Multi-Split - Inserts many splits along the feature. The distance between them is
determined by the section length and gap width.

What do you want to do?

▪ Insert multiple cable tray splits (on page 257)
▪ Insert a single cable tray split (on page 259)
▪ Insert a single cableway split (on page 260)

Intergraph Smart® 3D Electrical User's Guide 256

 Insert Split

Insert multiple cable tray splits

1. Click Insert Split .
2. Select a cable tray straight feature.

3. In the Split Mode box, select Multi-Split.

4. In the Section Length box, specify the length between splits.
5. In the Gap Width box, enter a value for the gap.
6. In the Reference Position box, choose Port 1 or Port 2.

Intergraph Smart® 3D Electrical User's Guide 257

 Insert Split

7. Click Finish.

Intergraph Smart® 3D Electrical User's Guide 258

 Insert Split

Insert a single cable tray split

1. Click Insert Split .
2. Click a cable tray straight feature.
If the length of the selected cable tray straight feature is less than the last-used
section length, then the software sets the section length to half of the straight feature length.

3. In the Split Mode box, select Single-Split.

4. To fine-tune the location of the split, click Position , and slide the split along the feature.

5. Click when it is at the location you want.

Instead of using Position, you can adjust the section length, gap, and reference
position boxes on the ribbon to adjust the location of the split.

Intergraph Smart® 3D Electrical User's Guide 259

 Insert Split

6. Click Finish.

Insert a single cableway split

1. Click Insert Split .
2. Click a cableway straight feature.
3. In the Split Mode box, select Single-Split.
4. To fine-tune the location of the split, click Position , and slide the split along the feature.
Click when it is at the location you want.
5. Click Finish.

Intergraph Smart® 3D Electrical User's Guide 260

SECTION 12

Sequence Objects
Renames objects in the selected conduit, cable tray, or WBS item such that the names are in
order, based on topology.

Sequence Objects Ribbon

Sets options for sequencing names in a conduit, cable tray, or WBS item.
Grouping/Sequencing Object Type
Select the grouping or object type that you want to sequence. You can select Cableway,
Conduit run, or WBS item. This option defines the collection of target objects to be
sequenced, and defines the boundaries of the sequencing.
Cancel
Resets the ribbon options.
Finish
Sets the object names in order using the options that you have set.
Target Object Type
Select what you want to re-sequence (rename) in the selected grouping.
Name Rule
Select the naming rule to use to rename the target objects.
Revision Control
Specify what to do with existing sequence number when you run the command again. Select
Retain existing numbers to keep the sequence number on any objects that have one, but
create a new sequence number for objects that do not have a sequence number. Select
Generate new numbers to discard all sequence numbers for the selected object and
generate new numbers for everything.
Start Sequence Id
Enter the sequence ID from which you want to begin the sequence. This option is available
only when Generate new numbers is selected.

What do you want to do?

▪ Sequence a conduit (on page 262)
▪ Sequence a cable tray (on page 262)
▪ Sequence a WBS item (on page 262)

Intergraph Smart® 3D Electrical User's Guide 261

 Sequence Objects

Sequence a conduit
1. Click Sequence Objects .
2. Select Conduit Run in the Grouping/Sequencing Object Type box.
3. Select one or more conduit runs in the Workspace Explorer or in the graphics view.
4. Select Conduit Part in the Target Object Type box.
5. Select the Name Rule and Revision Control.
6. Click Finish.

Sequence a cable tray

1. Click Sequence Objects .
2. Select Cableway in the Grouping/Sequencing Object Type box.
3. Select one or more cableways in the Workspace Explorer or in the graphics view.
4. Select Cabletray Part in the Target Object Type box.
5. Select the Name Rule and Revision Control option to use.
6. Click Finish.

Sequence a WBS item

1. Click Sequence Objects .
2. Select WBS Item in the Grouping/Sequencing Object Type box.
3. Select the WBS item in the Work Breakdown Structure tab.
4. Select the appropriate option in the Target Object Type box.
5. Select the Name Rule and Revision Control options to use.
6. Click Finish.

Intergraph Smart® 3D Electrical User's Guide 262

SECTION 13

Quick Route
Joins two existing cable tray or conduit segments in the model. You can connect the cable
tray or conduit segments by selecting an end feature, a nozzle, or a straight feature. The
software displays all possible route paths between the selected from and to points.

Path Options
The software displays only the applicable path options based on the location and orientation of
the selected end points in the model. The default option is Join Direct . The software
remembers the last used path and sets it as the default option for the next operation. However, if
the last used path is not applicable, the default option is reverted to Join Direct .
The software always computes the paths along the active co-ordinate axes.
Same axis: If both from and to end points lie along the same axis, then the software displays
only Join Direct .

Same plane: If the from and to end points exist in the same plane, then the software displays
the following options:
XY Plane:

XY

YX

Join Direct

Intergraph Smart® 3D Electrical User's Guide 263

 Quick Route

YZ Plane:

YZ

ZY

Join Direct

ZX Plane:

XZ

ZX

Join Direct

Different planes: If the from and to end points exist in different planes, then the software
displays the following options:

XYZ Y-ZX

XZY Z-XY

YZX YZ-X

YXZ ZX-Y

ZXY XY-Z

Intergraph Smart® 3D Electrical User's Guide 264

 Quick Route

ZYX Join Direct

X-YZ

Minimum Distance Between End Points

Make sure to maintain a minimum distance between the two end points along each axis to avoid
skews. The distance between the from and to end points should facilitate proper placement of
the turn features. Insufficient distance might cause skews. The minimum distance is based on
the dimensions of the selected route objects.

Fast Compute
In fast compute mode, the elbows or turns computed graphics are not rendered while in dynamic
display. By default, the software does not use fast compute mode to dynamically display the
computed graphics.

Fast Compute turned off Fast Compute turned on

Navigating the Path Options

When you hover the mouse on a path option, the software dynamically displays the computed
graphics for that path option. You can also press Tab or use the mouse scroll-wheel to navigate
across the path options. Alternatively, you can also use the arrow keys to navigate. As you
navigate, the software dynamically updates and displays the graphics.

Intergraph Smart® 3D Electrical User's Guide 265

 Quick Route

Limitation
Quick Route does not support cable tray barrier and duct bank specifications. The Number of
Barriers property on the New Cableway dialog box is not available when you are quick routing.
However, you can use a specification without barriers to join two cable trays with barriers.

Default Values
Quick Route uses the default values from the Defaults Tab (Cableway Settings Dialog Box),
and Defaults Tab (Conduit Settings Dialog Box). For more information, see Defaults Tab (see
"Defaults Tab (Cableway Settings Dialog Box)" on page 102) (cableway) and Defaults Tab
(Conduit Settings Dialog Box) (on page 153) (conduit).

Quick Route Cableway Ribbon

Join From
Specifies the starting end point.
Join To
Specifies the terminating end point.

Path Options
Displays all possible route path options to join the two end points. The first path option
displayed on the menu is the default option.
The software always computes the paths along the active co-ordinate
axes.

▪ Join Direct - Joins the from and to end points directly with a one-segment run,
irrespective of the axes.

▪ XY - Joins the from and to end points with the first segment run along the X-axis (E-
axis), and then with the second segment along the Y-axis (N-axis).

▪ YX - Joins the from and to end points with the first segment run along the Y-axis,
and then with the second segment along the X-axis.

▪ YZ - Joins the from and to end points with the first segment run along the Y-axis,
and then with the second segment along the Z-axis (El-axis).

▪ ZY - Joins the from and to end points with the first segment run along the Z-axis,
and then with the second segment along the Y-axis.

▪ XZ - Joins the from and to end points with the first segment run along the X-axis,
and then with the second segment along the Z-axis.

▪ ZX - Joins the from and to end points with the first segment run along the Z-axis,
and then with the second segment along the X-axis.

▪ X-YZ - Joins the from and to end points with the first segment run along the X-axis,
and then with the second segment along the YZ plane.

▪ Y-ZX - Joins the from and to end points with the first segment run along the Y-axis,
and then with the second segment along the ZX plane.

Intergraph Smart® 3D Electrical User's Guide 266

 Quick Route

▪ Z-XY - Joins the from and to end points with the first segment run along the Z-axis,
and then with the second segment along the XY plane.

▪ YZ-X - Joins the from and to end points with the first segment run along the YZ
plane, and then with the second segment along the X-axis.

▪ ZX-Y - Joins the from and to end points with the first segment run along the ZX
plane, and then with the second segment along the Y-axis.

▪ XY-Z - Joins the from and to end points with the first segment run along the XY
plane, and then with the second segment along the Z-axis.

▪ XYZ - Joins the from and to end points with the first segment run along the X-axis,
the second segment run along the Y-axis, and the third segment run along the Z-axis.

▪ XZY - Joins the from and to end points with the first segment run along the X-axis,
the second segment run along the Z-axis, and the third segment run along the Y-axis.

▪ YZX - Joins the from and to end points with the first segment run along the Y-axis,
the second segment run along the Z-axis, and the third segment run along the X-axis.

▪ YXZ - Joins the from and to end points with the first segment run along the Y-axis,
the second segment run along the X-axis, and the third segment run along the Z-axis.

▪ ZXY - Joins the from and to end points with the first segment run along the Z-axis,
the second segment run along the X-axis, and the third segment run along the Y-axis.

▪ ZYX - Joins the from and to end points with the first segment run along the Z-axis,
the second segment run along the Y-axis, and the third segment run along the X-axis.
Finish
Places a run along the selected route path.
Run
Displays the existing cableways in the model along with the <New Cableway>,
<New/Continue Run>, <Select Graphically>, <Load More Runs>, and More options.
Select the run to route.
<New Cableway> displays the New Cableway dialog box. Use this option to create a new
cableway run.
<New/Continue Run> extends an existing cableway if you select the end feature of that
cableway. If a run is continued, all runs associated with the system parent of the continued
run display in the list. If you do not select an end feature, the New Cableway dialog box is
displayed to create a cableway. For more information, see New Cableway Dialog Box (on
page 103).
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
More displays the Select Cableway dialog box. Use this option to select a cableway that is
associated with a different system parent. For more information, see Select Cableway
Dialog Box (on page 112).

Intergraph Smart® 3D Electrical User's Guide 267

 Quick Route

Fast Compute
Specifies whether the software must render complete computed graphics.

Quick Route Conduit Ribbon

Join From
Specifies the starting end point.
Join To
Specifies the terminating end point.

Path Options
Displays all possible route path options to join the two end points. The first path option
displayed on the menu is the default option.
The software always computes the paths along the active co-ordinate
axes.

▪ Join Direct - Joins the from and to end points directly with a one-segment run,
irrespective of the axes.

▪ XY - Joins the from and to end points with the first segment run along the X-axis (E-
axis), and then with the second segment along the Y-axis (N-axis).

▪ YX - Joins the from and to end points with the first segment run along the Y-axis,
and then with the second segment along the X-axis.

▪ YZ - Joins the from and to end points with the first segment run along the Y-axis,
and then with the second segment along the Z-axis (El-axis).

▪ ZY - Joins the from and to end points with the first segment run along the Z-axis,
and then with the second segment along the Y-axis.

▪ XZ - Joins the from and to end points with the first segment run along the X-axis,
and then with the second segment along the Z-axis.

▪ ZX - Joins the from and to end points with the first segment run along the Z-axis,
and then with the second segment along the X-axis.

▪ X-YZ - Joins the from and to end points with the first segment run along the X-axis,
and then with the second segment along the YZ plane.

▪ Y-ZX - Joins the from and to end points with the first segment run along the Y-axis,
and then with the second segment along the ZX plane.

▪ Z-XY - Joins the from and to end points with the first segment run along the Z-axis,
and then with the second segment along the XY plane.

▪ YZ-X - Joins the from and to end points with the first segment run along the YZ
plane, and then with the second segment along the X-axis.

▪ ZX-Y - Joins the from and to end points with the first segment run along the ZX
plane, and then with the second segment along the Y-axis.

Intergraph Smart® 3D Electrical User's Guide 268

 Quick Route

▪ XY-Z - Joins the from and to end points with the first segment run along the XY
plane, and then with the second segment along the Z-axis.

▪ XYZ - Joins the from and to end points with the first segment run along the X-axis,
the second segment run along the Y-axis, and the third segment run along the Z-axis.

▪ XZY - Joins the from and to end points with the first segment run along the X-axis,
the second segment run along the Z-axis, and the third segment run along the Y-axis.

▪ YZX - Joins the from and to end points with the first segment run along the Y-axis,
the second segment run along the Z-axis, and the third segment run along the X-axis.

▪ YXZ - Joins the from and to end points with the first segment run along the Y-axis,
the second segment run along the X-axis, and the third segment run along the Z-axis.

▪ ZXY - Joins the from and to end points with the first segment run along the Z-axis,
the second segment run along the X-axis, and the third segment run along the Y-axis.

▪ ZYX - Joins the from and to end points with the first segment run along the Z-axis,
the second segment run along the Y-axis, and the third segment run along the X-axis.
Finish
Places a run along the selected route path.
Run
Displays existing conduit runs along with the <New Conduit Run>, <New/Continue Run>,
<Select Graphically>, <Load More Runs>, and More options.
<New Conduit Run> displays the New Conduit Run dialog box. Use this option to create a
new conduit run.
<New/Continue Run> extends an existing conduit run if you select the end feature of the
conduit run. If a run is continued, all runs associated with the parent system display in the
list. If you do not select an end feature, the New Conduit Run dialog box displays to create
a conduit run. For more information, see New Conduit Run Dialog Box (on page 153).
<Select Graphically> allows you to select an existing run in a graphic view, or the
Workspace Explorer.
<Load More Runs> loads all the runs that belong to the parent system. This option is not
available after you load all the runs, or if the parent system contains less than 200 runs.
▪ More displays the Select Conduit dialog box. Use this option to select a conduit run
that is associated with a different conduit system. For more information, see Select
Conduit Dialog Box (on page 157).
Fast Compute
Specifies whether the software must render complete computed graphics.

What do you want to do?

▪ Join two existing cableways (on page 270)
▪ Join two existing conduits (on page 275)
▪ Join two existing cableways at a branch point (on page 270)
▪ Join two existing conduits at a branch point (on page 275)

Intergraph Smart® 3D Electrical User's Guide 269

 Quick Route

Join two existing cableways

1. Click Quick Route .
2. Select an end feature from which to extend the cableway.
3. Select a terminating end feature or a nozzle.
The software displays all possible path options based on the location of the selected
features. You can navigate through the path options and view the dynamic computed
graphics.

4. On the Path Options menu, select an option that you want. You can click the option
or press Enter to confirm your selection.
By default, the software considers the highlighted option as your selection.
5. If necessary, select an appropriate run from the Run drop-down list, or proceed to Step 6.
▪ Select <Select Graphically> to select an existing run in a graphic view or in the
Workspace Explorer.
▪ Select <New Cableway> to create a new cableway to route. For more information, see
New Cableway Dialog Box (on page 103).
▪ Select More... to select a cableway run that is associated with a different cable tray
parent. For more information, see Select Cableway Dialog Box (on page 112).
6. Click Finish.
The software joins the two end points along the selected path.
If the selected path results in skews, then the software prompts you with a
warning message.
a. Click No to undo the current path selection.
b. Select another path option, and then click Finish.
7. Continue quick routing, or right-click to exit the command.
See Also
Join a cableway from a nozzle or port (on page 271)

Join two existing cableways at a branch point

1. Click Quick Route .
2. Select an end feature or a cable nozzle from which to extend the cable tray run.
3. Select a terminating straight feature or header run.
The software displays all possible path options based on the location of the selected
features. You can navigate through the path options and view the dynamic computed
graphics.

4. On the Path Options menu, select an option that you want. You can click the option
or press Enter to confirm your selection.
By default, the software considers the highlighted option as your selection.
5. If necessary, select an appropriate run from the Run drop-down list, or proceed to Step 6.

Intergraph Smart® 3D Electrical User's Guide 270

 Quick Route

▪ Select <Select Graphically> to select an existing run in a graphic view or in the

Workspace Explorer.
▪ Select <New Cableway> to create a new cableway to route. For more information, see
New Cableway Dialog Box (on page 103).
▪ Select More... to select a cableway run that is associated with a different cable tray
parent. For more information, see Select Cableway Dialog Box (on page 112).
6. Click Finish.
The software joins the two end points along the selected path.
If the selected path results in skews, then the software prompts you with a
warning message.
a. Click No to undo the current path selection.
b. Select another path option, and then click Finish.
7. Continue quick routing, or right-click to exit the command.
See Also
Join cableway from a nozzle or port at a branch point (on page 273)

Join a cableway from a nozzle or port

1. Click Quick Route on the vertical toolbar.
2. Select a nozzle or port from which to extend the cableway.

The software displays the New Cableway dialog box. For more information, see New
Cableway Dialog Box (on page 103).
3. Select a cableway, and if necessary, specify required properties.
4. Select a terminating end feature or nozzle.

The software displays all possible path options based on the location of the selected
features. You can navigate through the path options and view the dynamic computed

Intergraph Smart® 3D Electrical User's Guide 271

 Quick Route

graphics.

5. On the Path Options menu, select an option that you want. You can click the option
or press Enter to confirm your selection.
By default, the software considers the highlighted option as your selection.

6. Click Finish.
The software joins the two end points along the selected path.

If the selected path results in skews, then the software prompts you with a
warning message.
a. Click No to undo the current path selection.
b. Select another path option, and then click Finish.
7. Continue quick routing, or right-click to exit the command.
See Also
Join two existing cableways (on page 270)

Intergraph Smart® 3D Electrical User's Guide 272

 Quick Route

Join cableway from a nozzle or port at a branch point

1. Click Quick Route on the vertical toolbar.
2. Select a cable tray nozzle from which to extend the cable tray.

The software displays the New Cableway dialog box. For more information, see New
Cableway Dialog Box (on page 103).
3. Select a cableway, and if necessary, specify required properties.
4. Select a terminating straight feature or header run.

The software displays all possible path options based on the location of the selected
features. You can navigate through the path options and view the dynamic computed
graphics.

5. On the Path Options menu, select an option that you want. You can click the option
or press Enter to confirm your selection.

Intergraph Smart® 3D Electrical User's Guide 273

 Quick Route

By default, the software considers the highlighted option as your selection.

6. Click Finish.
The software joins the two end points along the selected path.

If the selected path results in skews, then the software prompts you with a
warning message.
a. Click No to undo the current path selection.
b. Select another path option, and then click Finish.
7. Continue quick routing, or right-click to exit the command.
See Also
Join two existing cableways at a branch point (on page 270)

Intergraph Smart® 3D Electrical User's Guide 274

 Quick Route

Join two existing conduits

1. Click Quick Route .
2. Select an end feature from which to extend the conduit.
3. Select a terminating end feature.
The software displays all possible path options based on the location of the selected
features. You can navigate through the path options and view the dynamic computed
graphics.

4. On the Path Options menu, select an option that you want. You can click on the
option or press Enter to confirm your selection.
By default, the software considers the highlighted option as your selection.
5. If necessary, select an appropriate run from the Run drop-down list, or proceed to Step 6.
▪ Select <Select Graphically> to select an existing run in a graphic view or in the
Workspace Explorer.
▪ Select <New Conduit Run> to create a new conduit run to route. For more information,
see New Conduit Run Dialog Box (on page 153).
▪ Select More... to select a conduit run that is associated with a different conduit parent.
For more information, see Select Conduit Dialog Box (on page 157).
6. Click Finish.
The software joins the two end points along the selected path.
If the selected path results in skews, then the software prompts you with a
warning message.
a. Click No to undo the current path selection.
b. Select another path option, and then click Finish.
7. Continue quick routing, or right-click to exit the command.
See Also
Join a conduit from a nozzle or port (on page 276)

Join two existing conduits at a branch point

1. Click Quick Route .
2. Select an end feature from which to extend the conduit run.
3. Select a terminating straight feature or header run.
The software displays all possible path options based on the location of the selected
features. You can navigate through the path options and view the dynamic computed
graphics.

4. On the Path Options menu, select an option that you want. You can click the option
or press Enter to confirm your selection.
By default, the software considers the highlighted option as your selection.
5. If necessary, select an appropriate run from the Run drop-down list, or proceed to Step 6.

Intergraph Smart® 3D Electrical User's Guide 275

 Quick Route

▪ Select <Select Graphically> to select an existing run in a graphic view or in the

Workspace Explorer.
▪ Select <New Conduit Run> to create a new conduit run to route. For more information,
see New Conduit Run Dialog Box (on page 153).
▪ Select More... to select a conduit run that is associated with a different conduit parent.
For more information, see Select Conduit Dialog Box (on page 157).
6. Click Finish.
The software joins the two end points along the selected path.
If the selected path results in skews, then the software prompts you with a
warning message.
a. Click No to undo the current path selection.
b. Select another path option, and then click Finish.
7. Continue quick routing, or right-click to exit the command.
See Also
Join a conduit from a nozzle or port at a branch point (on page 278)

Join a conduit from a nozzle or port

1. Click Quick Route on the vertical toolbar.
2. Select a conduit nozzle from which to extend the conduit.

The software displays the New Conduit Run dialog box. For more information, see New
Conduit Run Dialog Box (on page 153).
3. Select a conduit, and if necessary, specify required properties.
4. Select a terminating end feature or nozzle.

The software displays all possible path options based on the location of the selected
features. You can navigate through the path options and view the dynamic computed
graphics.

Intergraph Smart® 3D Electrical User's Guide 276

 Quick Route

5. On the Path Options menu, select an option that you want. You can click the option
or press Enter to confirm your selection.
By default, the software considers the highlighted option as your selection.

6. Click Finish.
The software joins the two end points along the selected path.

If the selected path results in skews, then the software prompts you with a
warning message.
a. Click No to undo the current path selection.
b. Select another path option, and then click Finish.
7. Continue quick routing, or right-click to exit the command.
See Also
Join two existing conduits (on page 275)

Intergraph Smart® 3D Electrical User's Guide 277

 Quick Route

Join a conduit from a nozzle or port at a branch point

1. Click Quick Route on the vertical toolbar.
2. Select a conduit nozzle from which to extend the conduit.

The software displays the New Conduit Run dialog box. For more information, see New
Conduit Run Dialog Box (on page 153).
3. Select a conduit, and if necessary, specify required properties.
4. Select a terminating straight feature or header run.

The software displays all possible path options based on the location of the selected
features. You can navigate through the path options and view the dynamic computed
graphics.

5. On the Path Options menu, select an option that you want. You can click the option
or press Enter to confirm your selection.
By default, the software considers the highlighted option as your selection.

Intergraph Smart® 3D Electrical User's Guide 278

 Quick Route

6. Click Finish.
The software joins the two end points along the selected path.

If the selected path results in skews, then the software prompts you with a
warning message.
a. Click No to undo the current path selection.
b. Select another path option, and then click Finish.
7. Continue quick routing, or right-click to exit the command.
See Also
Join two existing conduits at a branch point (on page 275)

Intergraph Smart® 3D Electrical User's Guide 279

SECTION 14

Disconnect Command
Tools > Utilities > Disconnect (CTRL+ALT+D)
Use this command to disconnect a section of route network, and modify its topology without
disturbing the rest of the network. The software disconnects the selection at boundary
connections, and deletes any mating parts and transitions at the boundaries. The software also
removes all the relationships of the selection with the rest of the network.
We recommend that you reconnect objects after modifying the selection, to avoid topological
errors.
You can disconnect the following objects:
▪ a cableway
▪ a conduit run
▪ a set of cableway features or conduit features
▪ a feature such as a turn feature, a component type along-leg feature, or a straight feature.

Permission Group (PG), Approval Status, and Global Workshare Conditions

If you select route objects that belong to a permission group (PG) to which you have full control
permission, the software disconnects the selected objects at boundary connections. You can
also disconnect at a PG boundary connection if you do not have access to one side of the
connection. But, you must have full control permissions to the objects that you select for
disconnection.
If an object at the other end of the boundary connection is in a non-working approval state, the
software generates a To Do Record for that object. Also, the software generates a To Do
Record if the non-working object is in a different workshare location.

Limitations
▪ You cannot disconnect a branch feature, or an end feature.
▪ To disconnect a feature on a leg, you must have full control permission to that leg.
▪ If the selection includes equipment, the software does not disconnect the selection from the
equipment nozzle.
▪ You cannot disconnect a surface-mounted component.
▪ You cannot disconnect cables.
For more information on how the software disconnects objects at boundary connections, see
Disconnecting cable trays using Move (on page 323) and Disconnecting conduits using Move.

What do you want to do?

▪ Disconnect a cableway (on page 281)
▪ Disconnect a cableway feature (on page 282)

Intergraph Smart® 3D Electrical User's Guide 280

 Disconnect Command

▪ Disconnect a set of cableway features (on page 283)

▪ Disconnect a conduit run (on page 281)
▪ Disconnect a conduit feature (on page 283)
▪ Disconnect a set of conduit features (on page 284)

Disconnect a cableway
1. Click Select on the vertical toolbar.
2. Select Cableways in the Locate Filter.
3. Select a cable tray system from the Graphic View or the Workspace Explorer.
4. Click Tools > Utilities > Disconnect.
The software disconnects the selection, and prompts you to view the disconnection log.
5. Click Yes to view the log.
A log file displays the disconnection details.
The software disconnects the cableway from the rest of the network, and deletes
any mating parts or transitions at the boundary connections. The software also removes the
relationships between the cableway and the rest of the network.
Press CTRL+Z, or click Edit > Undo Disconnect. You can also use Undo
Disconnect on the main ribbon bar.

Disconnect a conduit run

1. Click Select on the vertical toolbar.
2. Select Conduit Runs in the Locate Filter.
3. Select a conduit run from the Graphic View or the Workspace Explorer.
4. Click Tools > Utilities > Disconnect.
The software disconnects the selection, and prompts you to view the disconnection log.
5. Click Yes to view the log.
A log file displays the disconnection details.
The software disconnects the conduit run from the rest of the network, and
deletes any mating parts or transitions at the boundary connections. The software also
removes the relationships between the conduit run and the rest of the network.
Press CTRL+Z, or click Edit > Undo Disconnect. You can also use Undo
Disconnect on the main ribbon bar.

Intergraph Smart® 3D Electrical User's Guide 281

 Disconnect Command

Disconnect a cableway feature

1. Click Select on the vertical toolbar.
2. In the Locate Filter, select Cableway Features.
3. Select a feature from the Graphic View or the Workspace Explorer.

You cannot select a branch feature or an end feature to disconnect.

4. Click Tools > Utilities > Disconnect.
The software disconnects the selection, and prompts you to view the disconnection log.
5. Click Yes to view the log.
A log file displays the disconnection details.

The software disconnects the cableway feature from the rest of the network, and
deletes any mating parts or transitions at the boundary connections. The software also
removes the relationships between the cableway feature and the rest of the network.
Press CTRL+Z, or click Edit > Undo Disconnect. You can also use Undo
Disconnect on the main ribbon bar.

Intergraph Smart® 3D Electrical User's Guide 282

 Disconnect Command

Disconnect a conduit feature

1. Click Select on the vertical toolbar.
2. In the Locate Filter, select Conduit Features.
3. Select a feature from the Graphic View or the Workspace Explorer.
You cannot select a branch feature or an end feature to disconnect.
4. Click Tools > Utilities > Disconnect.
The software disconnects the selection, and prompts you to view the disconnection log.
5. Click Yes to view the log.
A log file displays the disconnection details.
The software disconnects the feature from the rest of the network, and deletes
any mating parts or transitions at the boundary connections. The software also removes the
relationships between the feature and the rest of the network.
Press CTRL+Z, or click Edit > Undo Disconnect. You can also use Undo
Disconnect on the main ribbon bar.

Disconnect a set of cableway features

1. Click Select on the vertical toolbar.
2. In the Locate Filter, select Cableway Features.
3. Select the features from the Graphic View or the Workspace Explorer.
Use SHIFT+SELECT to select multiple features. You can also use the Route
Selection Commands (on page 58).

4. Click Tools > Utilities > Disconnect.

The software disconnects the selection, and prompts you to view the disconnection log.
5. Click Yes to view the log.

Intergraph Smart® 3D Electrical User's Guide 283

 Disconnect Command

A log file displays the disconnection details.

The software disconnects the selection from the rest of the network, and deletes
any mating parts or transitions at the boundary connections. The software also removes the
relationships between the selection and the rest of the network.
Press CTRL+Z, or click Edit > Undo Disconnect. You can also use Undo
Disconnect on the main ribbon bar.

Disconnect a set of conduit features

1. Click Select on the vertical toolbar.
2. In the Locate Filter, select Conduit Features.
3. Select the features from the Graphic View or the Workspace Explorer.
Use SHIFT+SELECT to select multiple features. You can also use the Route
Selection Commands (on page 58).
4. Click Tools > Utilities > Disconnect.
The software disconnects the selection, and prompts you to view the disconnection log.
5. Click Yes to view the log.
A log file displays the disconnection details.
The software disconnects the selection from the rest of the network, and deletes
any mating parts or transitions at the boundary connections. The software also removes the
relationships between the selelction and the rest of the network.
Press CTRL+Z, or click Edit > Undo Disconnect. You can also use Undo
Disconnect on the main ribbon bar.

Undo Disconnection
Press CTRL+Z, or click Edit > Undo Disconnect. You can also use Undo Disconnect on
the main ribbon bar.

Intergraph Smart® 3D Electrical User's Guide 284

SECTION 15

View Cable Schedule

Displays retrieved cable schedules. You must retrieve cable schedules to view or create cables
while in the Electrical task within Smart 3D. You can then update the cables. Use the
SmartPlant > Retrieve command to retrieve electrical documents. This command is only
available if you registered the active model with SmartPlant Foundation in the Project
Management task. For more information on how to retrieve documents, see Retrieve
Documents.
See Also
Cable Schedule Documents Dialog Box (on page 287)

Viewing Retrieved Cables

The SmartPlant > View Cable Schedule command displays retrieved cable schedule
documents into the model. The View Cable Schedule command is available only in Electrical
task.
The retrieved cable schedule documents contain cable design basis data. You can select the
retrieved cables, and create them in the 3D model using the cable schedule commands. All the
processed cables will be created under a specified electrical system in the Workspace Explorer.
Before viewing the cable schedule, select an appropriate electrical system in the Workspace
Explorer to create cables under that system. Smart 3D creates the cables with the same name
as in the cable schedule document. If you do not select an electrical system, then Smart 3D
creates a new system with the same name as the cable schedule document, and then creates
cables under the new system.
Smart 3D searches the terminal equipment defined in the cable schedule, and automatically
selects the equipment to which the new cable is connected. If the equipment is not in the model,
then the cable is not created in the model.
You can then select the cables from the Workspace Explorer, and modify as necessary.

Intergraph Smart® 3D Electrical User's Guide 285

 View Cable Schedule

Any modifications made to the cables are reflected in the cable schedule only when
you refresh the corresponding cables list.

See Also
Cable Schedule Documents Dialog Box (on page 287)
Cable Schedule Dialog Box (on page 288)
Import cables (on page 286)

Import cables

▪ You must retrieve at least one cable schedule to view the cable schedule. Use the
SmartPlant > Retrieve command. This command is available only if you have registered
the active model with SmartPlant Foundation in the Project Management. For more
information on how to retrieve documents, see in the Common User's Guide.
▪ Before viewing the cable schedule, select an appropriate electrical system in the
Workspace Explorer to create cables. Smart 3D creates the cables with the same name as
in the cable schedule document. If you do not select an electrical system, then Smart 3D
creates a new system with the same name as the cable schedule document, and then
creates cables under the new system.
▪ Set the Active Permission Group to Electrical and assign the objects that you place in the
model to the Active Permission Group.
1. Click SmartPlant > View Cable Schedule.
2. On the Cable Schedule Documents dialog box, select a cable schedule, and click Open.
3. On the Cable Schedule dialog box, set the Include up-to-date cables option as
necessary.

Intergraph Smart® 3D Electrical User's Guide 286

 View Cable Schedule

Include up-to-date cables option allows you to hide the cables that are already
processed and up-to-date.
4. Select cables in the grid.
You can click Select All, or use the CTRL or SHIFT keys to select multiple cables.
5. Click Validate to verify if the Part Number, From Device and To Device exist in 3D model
data.
The selected cable is validated, and its validation status is updated. Any missing data is
highlighted in bold text.
6. Select the validated cable, and then click Process.
For a cable to successfully process, its design basis data displayed on the list
must match with corresponding 3D model data.

▪ When you select a cable on the Cable Schedule dialog box, the corresponding cable is
automatically selected in the Workspace Explorer.

▪ You can Autoroute , or Delete a processed cable without exiting the Cable
Schedule dialog box.
▪ Click View Cable Schedule Documents to return to the cable schedule documents list.
See Also
Cable Schedule Documents Dialog Box (on page 287)
Cable Schedule Dialog Box (on page 288)

Cable Schedule Documents Dialog Box

Displays a list of retrieved cable schedules and their associated properties. Select a schedule,
and then click Open to view the cables.
Name
Displays the name of the document.
Document Type
Displays the type of document.
Document Title
Displays the title of the document.
See Also
Cable Schedule Dialog Box (on page 288)

Intergraph Smart® 3D Electrical User's Guide 287

 View Cable Schedule

Cable Schedule Dialog Box

Displays a list of cables in a grid format.
View Cable Schedule Documents
Returns you to the Cable Schedule Documents dialog box. You can also press
BACKSPACE.

Refresh
Updates the cable schedule. After modifying the cables in Smart 3D, click Refresh to reflect
the changes in the cable schedule.
Cable Name
Displays the name of the cable as defined in the design basis data.
Correlation Status
Displays the correlations status of the cable design basis data with corresponding 3D model
data. The colors identify the correlation status of each cable in the model and the design
basis object that corresponds to it.

Default Color Status Description

The cable in the design basis has a

Correlated and up-to- match in the 3D model without any
date discrepancies in the cable data, and the
data is up-to-date.

The cable in the design basis has a

Correlated, Data
match in the 3D model. However, there
Mismatch
are discrepancies in the cable data.

The cable in the design basis does not

Uncorrelated
exist in the 3D model, or is unknown.

The cable metadata in the design basis

Ignored
is ignored.

Part Number
Displays the part number for the cable as defined in the design basis data.
Part Description
Displays the short description of the cable part as defined in the design basis data.
From Device

Intergraph Smart® 3D Electrical User's Guide 288

 View Cable Schedule

Displays the cable originating equipment code as defined in the design basis data.
To Device
Displays the cable terminating equipment code as defined in the design basis data.
Signal Type
Displays the type of signal the cable will carry as defined in the design basis data.
Validation Status
Displays the validation status of the selected cable. The following are the available
validation statuses:
Not Validated - Specifies that the cable is not validated. This is the default status.
Invalid - Specifies that the cable is missing a Part Number, From Device, or To Device
data in 3D model. The missing value is highlighted in bold.
Valid - Specifies that the design basis cable has Part Number, From Device, and To
Device data in 3D model.
Validate
Verifies if the selected cable has Part Number, From Device, and To Device data available
in the 3D model.
Process
Imports or updates the selected cables. When you process the cables, the software creates
the cables in 3D model and correlates with corresponding cable design basis data.
View Log
Displays a CreateEFCables.log file. The file contains information about successfully
processed cables, and the cables that could not be processed due to data inconsistencies.
Include up-to-date cables
Appends Correlated and up-to-date cables to the current cable schedule.
Select All
Selects all the cables in the list.
Select Valid Cables
Selects all uncorrelated valid cables in the list.
See Also
Import cables (on page 286)
Cable Schedule Documents Dialog Box (on page 287)

Intergraph Smart® 3D Electrical User's Guide 289

APPENDIX A

Appendix: Property Dialog Boxes

The software displays some common property tabs on the Properties dialog boxes for all
electrical objects. Instead of repeatedly listing the common tabs with each electrical object
Properties dialog box, they are documented here for easy reference.

In This Appendix
Configuration Tab .......................................................................... 290
Connections Tab............................................................................ 292
Definition Tab................................................................................. 292
Default Property Values Tab ......................................................... 292
Notes Tab ...................................................................................... 299
Relationships Tab .......................................................................... 300
Occurrence Tab ............................................................................. 300
Select System Dialog Box ............................................................. 305

Configuration Tab
Displays the creation, modification, and status information about an object.
Plant/Ship
Displays the name of the model. You cannot change this value.
Permission Group
Specifies the permission group to which the object belongs. You can select another
permission group, if needed. Permission groups are created in Project Management.
Transfer
Reassigns ownership of the selected model objects from their current permission group to
another satellite or host permission group. This option is only available if the active model or
project is replicated in a workshare configuration. The option is not available if all of the
objects in the select set already belong to another location and are non-transferable. For
more information, see Transfer Ownership Dialog Box in the Common User's Guide.
Approval State
Specifies the status of the selected object or filter. The display depends on your access
level. You might be unable to change the status of the object. The list is defined by the
ApprovalStatus codelist.
You can only edit or manipulate an object with a status of Working.
Status
Specifies the location of the object in the workflow process. Changing this property sets the
Approval State. The list is controlled by the ApprovalReason codelist in the
ApprovalReason.xls file. You must bulkload this file. For more information, see
ApprovalReason in the Reference Data Guide.

Intergraph Smart® 3D Electrical User's Guide 290

 Appendix: Property Dialog Boxes

Date Created
Specifies the creation date of the object.
Created by
Specifies the name of the person who created the object.
Date Last Modified
Specifies the date of the last modification to the object.
Last Modified by
Specifies the name of the person who last modified the object.

Transfer Ownership Dialog Box

Allows you to specify a new location and permission group for the selected model objects.
Current location
Displays the name of the location with which the current permission group is associated. All
the objects in the select set must belong to the same location.
Current permission group
Displays the name of the permission group with which the selected objects are currently
associated. If all the objects in the select set do not belong to the same permission group,
this box appears blank.
New location
Specifies the name of the location to which you want to assign the objects. In a global
workshare configuration, this box lists all the locations in which you have write access to one
or more permission groups. The selection in this box filters the entries in the New
permission group box.
New permission group
Specifies the new permission group to which to assign the selected objects. If you specify a
value in the New location box, this list displays all permission groups to which you have
write access in the selected location. If you do not specify a value in the New location box,
this list includes all permission groups to which you have write access in all locations except
the current location. This box is blank if you do not have write access to any permission
groups at any locations other than the current one.
We strongly recommend that administrators follow naming convention rules that
include the location as a prefix in the permission group name.

Intergraph Smart® 3D Electrical User's Guide 291

 Appendix: Property Dialog Boxes

Connections Tab
Displays the connection information for the object, the properties and their values, as defined in
the reference data. For more information about the information defined in the reference data,
see the Electrical Reference Data Guide available from the Help > Printable Guides command
in the software.
Connector
Select the connector for which you want to view properties.
Property
Displays the name of the property as defined in the reference data.
Value
Displays the value of the corresponding property.
See Also
Edit Properties (on page 53)

Definition Tab
The Definition tab displays the object properties as they are defined in the reference data. The
property name appears on the left side of the grid and the corresponding property value appears
on the right side of the grid. If you selected more than one object and then selected the
Properties command, only the common properties between the selected objects display.
The properties that appear depend on what you defined in the reference data. For more
information on the properties, refer to the Electrical Reference Data Guide available from the
Help > Printable Guides command in the software.
See Also
Edit Properties (on page 53)

Default Property Values Tab

Sets default property values for piping, electrical, conduit, and ducting systems.
Category
Select the category type in which you want to define default properties. Currently, you can
select from the following categories: Responsibility, Standard, Surface Treatment and
Coating, Testing, Insulation and Tracing, Cable Fill, and Temperature and Pressure.

Standard
Specification
Select the specification that you want to be the default for this system. You might need to
use the Define Allowed Specifications command before you can select a specification
here. You define specifications in the reference data.
Minimum Slope
Specifies the slope for the runs created in this system. You can specify the slope as a ratio,
a percentage, or in degrees.

Intergraph Smart® 3D Electrical User's Guide 292

 Appendix: Property Dialog Boxes

▪ As a ratio, if a run drops 1/4" for every foot of horizontal distance, specify the slope as
1/4"/1'-0".
▪ As a percentage, if a run drops 1" for every 10" of horizontal distance, specify the slope
as 10%.
▪ In degrees, a five-degree slope can be specified as 5deg.
Max. Recommended Velocity
Specify the maximum flow velocity for the ducting system.
Max. Recommended Pressure Loss
Specify the maximum pressure loss for the ducting system.
Material
Select the default duct material for the ducting system.
Thickness
Select the default duct thickness for the ducting system.
Insulation Material
Select the material of the insulation. You can define insulation material in the Catalog task.
This property is available only for a ducting system.
Insulation Thickness
Specify the thickness of the insulation. This property is available only for a ducting system.

Cable Fill
Fill Efficiency
Displays or defines the efficiency of the stacking of cables in the cableway. You can enter a
real number, an integer, or a percent; for example, type 0.9, 90, or 90%.
Signal Type
Displays or defines the cable usage, which is used in tray fill calculations. If you want to add,
edit, or remove values that are available for selection, edit the Signal Type select list in the
Catalog task.
Voltage Grade
Displays or defines the voltage grade, which is used in determining the range of voltage that
the cableway can carry. If you want to add, edit, or remove values that are available for
selection, edit the Voltage Grade select list in the Catalog task.

Responsibility
Cleaning Responsibility
Select the party responsible for cleaning the object. If you want to add, edit, or remove
values that are available for selection, edit the Cleaning Responsibility select list in the
Catalog task.
Design Responsibility
Select the party responsible for designing the object. If you want to add, edit, or remove
values that are available for selection, edit the Design Responsibility select list in the

Intergraph Smart® 3D Electrical User's Guide 293

 Appendix: Property Dialog Boxes

Catalog task.
Fabrication Responsibility
Select the party responsible for fabricating the object. If you want to add, edit, or remove
values that are available for selection, edit the Fabrication Responsibility select list in the
Catalog task.
Installation Responsibility
Select the party responsible for installing the object. If you want to add, edit, or remove
values that are available for selection, edit the Installation Responsibility select list in the
Catalog task.
Painting Responsibility
Select the party responsible for painting the object. If you want to add, edit, or remove
values that are available for selection, edit the Painting Responsibility select list in the
Catalog task.
Requisition Responsibility
Select the party responsible for ordering the object. If you want to add, edit, or remove
values that are available for selection, edit the Requisition Responsibility select list in the
Catalog task.
Supply Responsibility
Select the party responsible for delivering the object. If you want to add, edit, or remove
values that are available for selection, edit the Supply Responsibility select list in the
Catalog task.
Testing Responsibility
Select the party responsible for testing the weld on the object. If you want to add, edit, or
remove values that are available for selection, edit the Testing Responsibility select list in
the Catalog task.

Surface Treatment and Coating

Interior Surface Treatment Requirement
Select the interior treatment requirement for the object. If you want to add, edit, or remove
values that are available for selection, edit the Interior Surface Treatment select list in the
Catalog task.
Interior Surface Treatment Type
Select the interior treatment type for the object. If you want to add, edit, or remove values
that are available for selection, edit the Interior Surface Treatment select list in the Catalog
task.
Exterior Surface Treatment Requirement
Select the exterior treatment requirement for the object. If you want to add, edit, or remove
values that are available for selection, edit the Exterior Surface Treatment select list in the
Catalog task.
Exterior Surface Treatment Type
Select the exterior treatment type for the object. If you want to add, edit, or remove values
that are available for selection, edit the Exterior Surface Treatment select list in the

Intergraph Smart® 3D Electrical User's Guide 294

 Appendix: Property Dialog Boxes

Catalog task.
Cleaning Requirement
Select the cleaning requirement for the object. If you want to add, edit, or remove values
that are available for selection, edit the Cleaning Requirement select list in the Catalog
task.
Steamout Requirement
Select the steam out requirement for the object. If you want to add, edit, or remove values
that are available for selection, edit the Steamout Requirement select list in the Catalog
task.
Steamout Pressure
Specify the steamout pressure for the object. Include the pressure unit of measure (psi for
pounds per square inch, for example) when specifying this value.
Steamout Temperature
Specify the steamout temperature for the object. Include the temperature unit of measure (K
for Kelvin, F for Fahrenheit, or C for Celsius, for example) when specifying this value.
Auxiliary Treatment Requirement
Specify any auxiliary treatment requirement.
Auxiliary Treatment Type
Specify any auxiliary treatment type.
Interior Coating Requirement
Select the interior coating requirement for the object. If you want to add, edit, or remove
values that are available for selection, edit the Coating Type select list in the Catalog task.
Interior Coating Type
Select the interior coating type for the object. If you want to add, edit, or remove values that
are available for selection, edit the Coating Type select list in the Catalog task.
Interior Coating Area
Enter total area that the coating covers.
Exterior Coating Requirement
Select the exterior coating requirement for the object. If you want to add, edit, or remove
values that are available for selection, edit the Coating Type select list in the Catalog task.
Exterior Coating Type
Select the exterior coating type for the object. If you want to add, edit, or remove values that
are available for selection, edit the Coating Type select list in the Catalog task.
Exterior Coating Area
Enter the total area that the coating covers.
Coating Color
Select the color of the object coating. If you want to add, edit, or remove values that are
available for selection, edit the Coating Color select list in the Catalog task.

Intergraph Smart® 3D Electrical User's Guide 295

 Appendix: Property Dialog Boxes

Testing
Testing Requirement
Specifies whether non-destructive testing of welds is required.
Testing Type
Select the type of non-destructive weld testing for the welds. If you want to add, edit, or
remove values that are available for selection, edit the Testing Type select list in the
Catalog task.
Testing Percentage
Type the percentage of the welds on this pipe run that are to be tested. This option is
available only if you are viewing pipe run properties.

Insulation and Tracing

Insulation Specification
Displays the insulation specification for the object. You define which insulation specifications
are available for which systems in the System and Specifications task. You define insulation
specifications in the reference data.
Insulation Purpose
Displays the purpose of the insulation. You can define insulation purposes in the Catalog
task.
Insulation Material
Displays the material of the insulation. You can define insulation material in the Catalog
task.
Insulation Thickness
Displays the thickness of the insulation.
Insulation Temperature
Type the temperature. Include the temperature unit of measure (K for Kelvin, F for
Fahrenheit, or C for Celsius, for example) when specifying this value.
Heat Tracing Requirement
Select whether or not the object is heat-traced. If you want to add, edit, or remove values
that are available for selection, edit the Heat Tracing Medium select list in the Catalog task.
Heat Tracing Type
Select the type of heat-tracing. If you want to add, edit, or remove values that are available
for selection, edit the Heat Tracing Medium select list in the Catalog task.

Intergraph Smart® 3D Electrical User's Guide 296

 Appendix: Property Dialog Boxes

Heat Tracing Medium

Select the heat-tracing medium to apply to the object. If you want to add, edit, or remove
values that are available for selection, edit the Heat Tracing Medium select list in the
Catalog task.
Heat Tracing Medium Temperature
Specify the temperature of the heat-tracing medium. Include the temperature unit of
measure (K for Kelvin, F for Fahrenheit, or C for Celsius, for example) when specifying this
value.

Temperature and Pressure

If service limits have been defined, you must define one set of pressure/temperature values
(Design Maximum Temperature and Design Maximum Pressure, for example) before you
can place the object. The software does not prevent you from defining testing temperatures and
pressures that exceed the defined service limits.
Design Maximum Temperature
Specify the maximum design temperature for the object. Include the temperature unit of
measure (K for Kelvin, F for Fahrenheit, or C for Celsius, for example) when specifying this
value.
Design Minimum Temperature
Specify the minimum design temperature for the object. Include the temperature unit of
measure (K for Kelvin, F for Fahrenheit, or C for Celsius, for example) when specifying this
value.
Design Maximum Pressure
Specify the maximum design pressure for the object. Include the pressure unit of measure
(psi for pounds per square inch, for example) when specifying this value.
Operating Maximum Temperature
Specify the maximum operating temperature for the object. Include the temperature unit of
measure (K for Kelvin, F for Fahrenheit, or C for Celsius, for example) when specifying this
value.
Operating Minimum Temperature
Specify the minimum operating temperature for the object. Include the temperature unit of
measure (K for Kelvin, F for Fahrenheit, or C for Celsius, for example) when specifying this
value.
Operating Maximum Pressure
Specify the maximum operating pressure for the object. Include the pressure unit of
measure (psi for pounds per square inch, for example) when specifying this value.
Testing Maximum Temperature
Specify the maximum testing temperature for the object. Include the temperature unit of
measure (K for Kelvin, F for Fahrenheit, or C for Celsius, for example) when specifying this
value.

Intergraph Smart® 3D Electrical User's Guide 297

 Appendix: Property Dialog Boxes

Testing Minimum Temperature

Specify the minimum testing temperature for the object. Include the temperature unit of
measure (K for Kelvin, F for Fahrenheit, or C for Celsius, for example) when specifying this
value.
Testing Maximum Pressure
Specify the maximum testing pressure for the object. Include the pressure unit of measure
(psi for pounds per square inch, for example) when specifying this value.
Design Minimum Pressure
Specify the minimum design pressure for the object. Include the pressure unit of measure
(psi for pounds per square inch, for example) when specifying this value.
Operating Minimum Pressure
Specify the minimum operating pressure for the object. Include the pressure unit of measure
(psi for pounds per square inch, for example) when specifying this value.
Testing Minimum Pressure
Specify the minimum testing pressure for the object. Include the pressure unit of measure
(psi for pounds per square inch, for example) when specifying this value.

Adding Custom Default Properties

You can add your own custom default properties to this tab by editing the
SystemUserDefinedDefaultProperties.xls workbook available on the customer support
(https://smartsupport.intergraph.com) web site, and then bulkloading the edited workbook into
your Catalog. For more information about bulkloading workbooks, refer to the Smart 3D
Reference Data Guide, available from Help > Printable Guide. Only properties for piping,
electrical, and conduit systems can be added to this tab.
The interfaces for the default property values are limited to the following:
IJUASASSPipingDefaults, IJUASASSElectircalDefaults, and IJUASASSConduitDefaults. You
must use these interfaces for the properties that you want to add to this tab.
The categories for the default property values are limited also. For Piping systems, the
categories are: Standard, Responsibility, Surface Treatment and Coating, Testing,
Insulation and Tracing, and Temperature.
For Electrical systems, the categories are: Standard, Responsibility, Surface Treatment and
Coating, and Cable Fill.
For Conduit Systems, the categories are: Standard, Responsibility, Surface Treatment and
Coating, and Cable Fill.

Intergraph Smart® 3D Electrical User's Guide 298

 Appendix: Property Dialog Boxes

Notes Tab
Creates and edits user-definable text placed by the designer on an object in the model. The
notes provide special instructions related to the object for the fabricator and are available in
downstream tasks. For example, the notes appear in two-dimensional drawings and within
design review sessions.
Only one note of a given kind from a given object can be shown on a drawing. For
example, if there are two fabrication notes on a piping part, then only one of the notes shows on
the drawing. It is important to know about and to consider this situation when defining notes on
an object in the modeling phase. For example, you can display one Fabrication note and one
Installation note by defining two separate labels for the two kinds of notes.
Key point
Specifies the key point on the object to which you want to add a note.
Notes at this location, listed by name
Lists all notes for the selected key point on the object.
Date
Displays the date that the note was created. The system automatically supplies the date.
Time
Displays the time that the note was created. The system automatically supplies the time.
Purpose of note
Specifies the purpose of the note.
Author
Displays the login name of the person who created the note. The system automatically
supplies this information. You cannot change this information.
Note text
Defines the note text. The software does not limit the length of the note text.
Show dimension
Indicates that the note generates a dimension.
If you are displaying the properties for a Support component, then a dimension can be
included for the component in the Support drawings, if you select the Show dimension
option. The note must be associated with one of the key points for the Support component.
It is recommended that you set the Purpose of note as Fabrication, but this is not a
requirement. The note Name and Note text are not used when you select this option.
New Note
Creates a new note on the object.
Standard Note
Displays a list of standard notes from which you can select. This feature is not available in
this version.
Highlight Note
Highlights the note in the graphic view so that you can easily find the note and the object to

Intergraph Smart® 3D Electrical User's Guide 299

 Appendix: Property Dialog Boxes

which it is related. This feature is not available in this version.

Delete Note
Deletes the currently displayed note.

Relationships Tab
Displays all objects related to the selected object for which you are viewing properties. For
example, if you are viewing the properties of a pipe run, the related pipeline, features, parts,
associated control points, hangers or supports, and equipment display on this tab. All WBS
assignments, including project relationships, appear on this tab.
Additional examples for marine relationships are as follows:
▪ For plate and profile system properties, the related bounded objects, bounding objects, and
connections are shown.
▪ For plate and profile system part properties, parent systems are shown.
▪ For assembly connection properties, all connected objects are shown.
▪ For the properties of a frame connection on a member, supported, supporting, and auxiliary
supporting parts are shown.
▪ For split connection properties, the parent and auxiliary supporting parts are shown.
Name
Specifies the name of the object.
Type
Specifies the type of object.
Go To
Displays the properties of the selected object.

Occurrence Tab
Displays instance-specific information about the object. For more information about occurrences
defined in the reference data, see the Electrical Reference Data Guide available from the Help >
Printable Guides command in the software.
Category
Select the properties that you want to view for the object. Object properties are divided into
two categories: Standard, Weight and CG, and Fabrication and Construction.
Insert Next Cable
Resets the property values to default values except System, Name Rule and Signal Type.
This command is available only after you successfully insert a cable by clicking Apply.

Standard
Displays all the occurrence properties for the part as defined in the reference data. If the table is
blank, the object for which you are viewing properties does not have any occurrence properties
defined for it in the reference data. Not all standard category properties defined here are

Intergraph Smart® 3D Electrical User's Guide 300

 Appendix: Property Dialog Boxes

available on every part type. For more information about occurrences defined in the reference
data, see the Electrical Reference Data Guide.
System
Select the system to which you want the object to belong. The last system that you selected
is the default. Select More to display all systems. You can create a new cable in the
Systems and Specifications task.
Name
Displays the occurrence name of the object.
Name Rule
Displays how the object was named. If set to Default Name Rule, the software names the
object using the default naming rule. If set to User Defined, then you need to specify the
object name manually.
Modeled Length
Specifies the length of the object as it is modeled.
Reporting Requirement
Select the reporting requirements for the object. You can specify that the object is reported
or not reported. An example of an object that you might not want reported is a spacer for a
valve. You have to order the valve, but the spacer comes with the valve and does not need
to be ordered separately.
Reporting Type
Select the reporting type. The options that are available here depend on what you select for
the Reporting Requirement.
Parallel Cables
Specifies the number of parallel cables the conduit\cableway will contain.
Operating Voltage
Specifies the operating voltage of the cable.
Signal Type
Specifies the type of application of the cable, such as Communication, Control, Data, Fire
Alarm, Lighting, Multi-Conductor Power, Power, and Signal. The default option is
Undefined.
Part Number
Specifies the part number for the cable.
Cable Type
Displays the name of cable type corresponding to the selected part number, as defined in
the reference data.
Cable Diameter
Displays the diameter of the cable corresponding to the selected part number, as defined in
the reference data.
Originating Device

Intergraph Smart® 3D Electrical User's Guide 301

 Appendix: Property Dialog Boxes

Specifies the device type from which the cable originates. You can browse to select
equipment, piping components, piping custom specialties and instruments as the originating
devices.
Receptacle (Equipment 1)
Specifies the receptacle equipment type. This property is available depending on the
originating device.
Terminal (Equipment 1)
Specifies the terminal equipment type. This property is available depending on the
originating device.
Connector (Equipment 1)
Specifies the type of connector. This property is available depending on the originating
device.
Backshell (Equipment 1)
Specifies the type of backshell. This property is available depending on the originating
device.
Terminating Device
Specifies the device type at which the cable terminates. You can browse to select
equipment, piping components, piping custom specialties and instruments as the
terminating devices.
Receptacle (Equipment 2)
Specifies the receptacle equipment type. This property is available depending on the
terminating device.
Terminal (Equipment 2)
Specifies the terminal equipment type. This property is available depending on the
terminating device.
Connector (Equipment 2)
Specifies the type of connector. This property is available depending on the terminating
device.
Backshell (Equipment 2)
Specifies the type of backshell. This property is available depending on the terminating
device.
Modeled Length
Specifies the length of the object as routed.
Cableway Length
Specifies the length of the cable in the cableway\conduit.
Tail Length At Origin
Specifies the tail length of the cable at the origin.
Tail Length At Destination
Specifies the tail length of the cable at the destination.

Intergraph Smart® 3D Electrical User's Guide 302

 Appendix: Property Dialog Boxes

Estimated Total length

Displays the estimated length of the cable. This value is equal to the sum of Cableway
Length, Tail Length at Origin, and Tail Length at Destination. The default value is 0.
Cut Cable Length
Displays the total cable length. This value is equal to the sum of Spare Cable Length at
Origin, Spare Cable Length at Destination, and Estimated Total Length. The default
value is 0.
Spare Cable Length at Origin
Specifies the length of the cable spared at the originating device. The default value is 0.
Spare Cable Length at Destination
Specifies the length of the cable spared at the terminating device. The default value is 0.

▪ After migrating the models, the old Spare Cable length is assigned to Spare Cable
Length at Origin. If the old Spare Cable value is empty, then this property is set to its
default value.
▪ When you delete the routed cable, the Spare Cable Length at Origin and Spare Cable
Length at Destination values for that cable are retained.
▪ You need to configure and update the reports after the migration.
Conduit Specification
Displays the specification of the conduit.
Reporting Requirement
Select the reporting requirements for the object. You can specify that the object is reported
or not reported.
Reporting Type
Specifies the reporting type. The options that are available here depend on what you select
for the Reporting Requirement.
The glyph indicates that the reporting type for the part is determined by the
specification. After you modify the reporting type, the glyph is no longer visible.
The glyph is not visible for cableway and duct bank parts.
Sequence ID
Specifies the object sequence ID.
Route Status
Specifies the route status. The default value is Undefined. The list is defined by the
CableRouteStatus codelist.
Correlation Basis
Displays if the cable is required to be correlated to a P&ID cable. Select Correlate object if
the cable has a correlating cable in a P&ID. Select No correlation is required if the cable
does not have a correlating cable in a P&ID.
Correlation Status

Intergraph Smart® 3D Electrical User's Guide 303

 Appendix: Property Dialog Boxes

Displays whether the cable has been correlated to a cable in a P&ID.

Correlation Approval Status
Displays if the component is approved with discrepancies in the three-dimensional data
compared with design basis data. Select Topology mismatch approved if the topology
mismatch of components can be ignored. Select Data and Topology mismatches
approved if the data and topology mismatches of components can be ignored. Select None
if you do not want to approve a mismatch.

Weight and CG
Displays the center-of-gravity and the weight of the selected object. The software includes the
insulation weight in the calculated weight. If you key-in the weight yourself, you must include the
insulation weight in the weight value that you type. The center-of-gravity locations are displayed
in global system coordinates along the X-, Y-, and Z-axes.
Dry Weight
Displays the dry weight of the object.
Wet Weight
Displays the wet weight of the object.
Dry CG X
Displays the X-axis location of the dry center-of- gravity.
Dry CG Y
Displays the Y-axis location of the dry center-of- gravity.
Dry CG Z
Displays the Z-axis location of the dry center-of- gravity.
Wet CG X
Displays the X-axis location of the wet center-of- gravity.
Wet CG Y
Displays the Y-axis location of the wet center-of- gravity.
Wet CG Z
Displays the Z-axis location of the wet center-of- gravity.

Fabrication and Construction

Fabrication Requirement
Specifies the fabrication requirement for the object. To change the options on the list, edit
the Fabrication Type select list in Catalog.
Fabrication Type
Specifies the type of fabrication for the object. To change the options on the list, edit the
Fabrication Type select list in Catalog.
The glyph indicates that the fabrication type for the part is determined by the
specification. The glyph is not visible after you modify the fabrication type.

Intergraph Smart® 3D Electrical User's Guide 304

 Appendix: Property Dialog Boxes

Construction Requirement
Specifies the construction requirement for the object. To change the options on the list, edit
the Construction Requirement select list in Catalog.
Construction Type

Specifies the type of construction for the object. To change the options on the list, edit the
Construction Type select list in Catalog.
See Also
Edit Properties (on page 53)

Select System Dialog Box

Displays the systems applicable to the current command. For example, if you are routing
conduit, the conduit and generic systems are displayed on this dialog box.
Look in
Specify where you want to look for the system. Select Workspace to look for the system in
your defined workspace only. Select Database to look for the system in the entire Model
database.

Intergraph Smart® 3D Electrical User's Guide 305

APPENDIX B

Appendix: Deleting at Boundary

Connections
If you delete a cable tray connected to another cable tray, cableway, or an equipment the
software deletes all associated boundary connections. Also, if you delete a header run, or
branch run, the software deletes all associated connections between the header and branch run.
The software deletes the mating parts if they are in as working state. If the mating part is in non-
working state or in different satellite location, the software generates a To-Do record for that
part.
You cannot delete a route object in non-working status, such as Approved, In Review, and
Rejected. But, deleting route objects in a permission group with read-only access has few
exceptions. Also, in a Global Workshare configuration deleting route objects at a different
satellite location has exceptions. These exceptions are illustrated in the following topics.
See Also
Cable tray to cable tray connections (on page 306)
Header to branch connections (on page 311)

Cable tray to cable tray connections

No. Route Object Approval Status Permission Group Access

1 Cable Tray A Working Full control/ Write

2 Cable Tray B Non-working -

Result: If you delete cable tray A, the software also deletes all associated connections.

Before deletion After deletion

Intergraph Smart® 3D Electrical User's Guide 306

 Appendix: Deleting at Boundary Connections

Route Object Approval Status Permission Group Access

No.

1 Cable tray A Working Full control/ Write

2 Cable tray B Non-working -

3 Turn feature associated with cable tray A

4 Reducing transition associated with cable turn B

Result: If you delete cable tray A, the software also deletes all associated connections.

Before deletion After deletion

Intergraph Smart® 3D Electrical User's Guide 307

 Appendix: Deleting at Boundary Connections

No. Route Object Approval Status Permission Group Access

1 Cable tray A Working Full control/ Write

2 Cable tray B Non-working -

3 Reducer associated with cable tray A

Result: If you delete cable tray A, the software also deletes associated objects, and connections.

Before deletion After deletion

No. Route Object Approval Status Permission Group Access

1 Cable tray A Working Full control/ Write

2 Cable tray B Non-working -

3 Reducer associated with cable tray B

Result: If you delete cable tray A, the software also deletes all associated connections. If the reducer is a mating
part, the software generates a To Do Record. You must have Write access on the part to update the To Do Record.

Before deletion After deletion

Intergraph Smart® 3D Electrical User's Guide 308

 Appendix: Deleting at Boundary Connections

Conduit run to conduit run connections

No. Route Object Approval Status Permission Group Access

1 Conduit run A Working Full control/ Write

2 Conduit run B Non-working -

3 Coupling associated with conduit run A

Result: If you delete conduit run A, the software also deletes associated objects and connections.

Before deletion After deletion

No. Route Object Approval Status Permission Group Access

1 Conduit run A Non-working -

2 Conduit run B Working Full control/ Write

3 Coupling associated with conduit run A

Result: If you delete conduit run B, the software also deletes all associated connections. If the coupling is a mating
part, the software generates a To Do Record. You must have Write access on the part to update the To Do Record.

Before deletion After deletion

Intergraph Smart® 3D Electrical User's Guide 309

 Appendix: Deleting at Boundary Connections

Route Object Approval Status Permission Group Access

No.

1 Conduit run A Working Full control/ Write

2 Conduit run B Working Read-only

3 Reducer associated with conduit run B

Result: If you delete conduit run A, the software also deletes the associated objects, and connections.

Before deletion After deletion

No. Route Object Approval Status Permission Group Access

1 Conduit run A Working Full control/ Write

2 Conduit run B Non-working -

3 Reducer associated with conduit run B

Result: If you delete conduit run A, the software also deletes all associated connections, but does not delete the
reducer. The software generates a To Do Record for the reducer.

Before deletion After deletion

See Also
Conduit header to branch connections (on page 314)
Header to branch connections (on page 311)

Intergraph Smart® 3D Electrical User's Guide 310

 Appendix: Deleting at Boundary Connections

Header to branch connections

No. Route Object Approval Status Permission Group Access

1 Branch run Working Full control/ Write

2 Header run Working Read-only

3 Tee associated with header run

Result: If you delete the branch run, the software also deletes all associated connections, but does
not delete the tee.

Before deletion After deletion

No. Route Object Approval Status Permission Group Access

1 Branch run Working Full control/ Write

2 Header run Non-working -

3 Tee associated with header run

Result: If you delete the branch run, the software deletes all associated connections, but does not
delete the tee. The software generates a To Do Record for the tee.

Before deletion After deletion

Intergraph Smart® 3D Electrical User's Guide 311

 Appendix: Deleting at Boundary Connections

No. Route Object Approval Status Permission Group Access

1 Header run Working Full control/ Write

2 Branch run Non-working -

3 Tee associated with header run

Result: If you delete the header run, the software also deletes all associated connections.

Before deletion After deletion

No. Route Object Approval Status Permission Group Access

1 Header run Non-working -

2 Branch run (cableway) Working Full control/ Write

3 Split/Along-leg feature associated with the header run

Result: If you delete the branch run, the software also deletes all associated connections except the
along-leg feature. The software generates a To Do Record for the along-leg feature.

Before deletion After deletion

Intergraph Smart® 3D Electrical User's Guide 312

 Appendix: Deleting at Boundary Connections

No. Route Object Approval Status Permission Group Access

1 Branch run Working Full control/ Write

2 Header run Non-working -

3 Vertical tee associated with header run

Result: If you delete the branch run, the software also deletes the associated connections, but does
not delete the tee. The software generates a To Do Record for the tee.

Before deletion After deletion

Intergraph Smart® 3D Electrical User's Guide 313

 Appendix: Deleting at Boundary Connections

Conduit header to branch connections

No. Route Object Approval Status Permission Group Access

1 Header run Working Read-only

2 Branch run Working Full control/ Write

3 Tee associated with header run

Result: If you delete the branch run, the software also deletes all associated connections, but does
not delete the tee.

Before deletion After deletion

Intergraph Smart® 3D Electrical User's Guide 314

 Appendix: Deleting at Boundary Connections

No. Route Object Approval Status Permission Group Access

1 Header run Non-working -

2 Branch run Working Full control/ Write

3 Tee associated with header run

Result: If you delete the branch run, the software also deletes all associated connections. The
software does not delete the tee, and generates a To Do Record for the tee.

Before deletion After deletion

No. Route Object Approval Status Permission Group Access

1 Header run Working Full control/ Write

2 Branch run Working Read-only

3 Tee associated with header run

Result: If you delete the header run, the software also deletes all associated objects and
connections.

Before deletion After deletion

Intergraph Smart® 3D Electrical User's Guide 315

 Appendix: Deleting at Boundary Connections

No. Route Object Approval Status Permission Group Access

1 Header run Working Full control/ Write

2 Branch run Non-working Read-only

3 Tee associated with header run

Result: If you delete the header run, the software also deletes all associated objects and
connections.

Before deletion After deletion

Intergraph Smart® 3D Electrical User's Guide 316

APPENDIX C

Appendix: Moving at Boundary

Connections
If you move a section of a cable tray network, the software modifies and disconnects the cable
tray network as necessary to maintain the cable tray design intent. Also, the software lengthens
or shortens the cable tray as needed to make a connection.
See Also
Connecting cable trays or cableways using Move (on page 317)
Disconnecting cable trays using Move (on page 323)

Connecting cable trays or cableways using Move

To connect two cable trays or cableways using Move :
▪ For inline connections, the two cable tray ends or cableway ends must be collinear to each
other.
▪ For branch connections, the header and branch runs must be orthogonal to each other.
▪ There should be sufficient space at the connection to accommodate the connecting part. If
the space is not sufficient, the software does not make a connection and displays a
message suggesting that you manually to connect the cable trays.
▪ The software consumes the first available straight feature of the moved cable tray to
accommodate the connection thickness, such as a mating part.
▪ In a partial move, if the connection results in an overlap the software connects the two ends
with a To Do Record to maintain the connectivity.
▪ If there is no space to accommodate the mating part, the software does not connect the two
ends and displays a message suggesting that you to connect the ends manually.

Intergraph Smart® 3D Electrical User's Guide 317

 Appendix: Moving at Boundary Connections

Inline Connection
No. Route Object Approval Status Permission Group Access

1 Cable tray A Working Full control/ Write

2 Cable tray B Working Full control/ Write

Result: The software connects the cable trays A and B, but does not merge the cable trays into a single cable tray.

No. Route Object Approval Status Permission Group Access

1 Cable tray A Working Full control/ Write

2 Cable tray B Working Full control/ Write

3 Mating part associated with cable tray B

Result: The software connects the two cable trays with a mating part. Reduction in cable tray B straight length = mating part length.

Intergraph Smart® 3D Electrical User's Guide 318

 Appendix: Moving at Boundary Connections

No. Route Object Approval Status Permission Group Access

1 Cable tray A Working Full control/ Write

2 Cable tray B Working Full control/ Write

3 Connection overlap

Result: The software does not connect the cable trays because there was not enough space to accommodate the transition part.
The software displays a message suggesting that you to connect the trays manually.

Branch Connection
No. Route Object Approval Status Permission Group Access

1 Header run Working Full control/ Write

2 Branch run Working Full control/ Write

3 Vertical tee connection associated with the header

Result: The software connects the header and branch runs using a system-generated vertical tee.

Intergraph Smart® 3D Electrical User's Guide 319

 Appendix: Moving at Boundary Connections

No. Route Object Approval Status Permission Group Access

1 Header run Working Full control/ Write

2 Branch run Working Full control/ Write

3 Horizontal tee connection associated with the header

Result: The software connects the header and branch runs at the tee end feature.

No. Route Object Approval Status Permission Group Access

1 Header run Working Full control/ Write

2 Branch run Working Full control/ Write

3 Connection overlap

Result: The software does not connect the cable trays because there was not enough space to accommodate the transition part.
The software displays a message suggesting that you connect the trays manually.

Intergraph Smart® 3D Electrical User's Guide 320

 Appendix: Moving at Boundary Connections

Connecting conduit runs using Move

To connect two conduit runs using Move :
▪ For inline connections, the two conduit ends must be collinear to each other.
▪ For branch connections, the header and branch runs must be orthogonal to each other.
▪ There should be sufficient space at the connection to accommodate the connecting part. If
the space is not sufficient, the software does not make a connection and displays a
message suggesting that you connect the conduit runs manually.
▪ The software consumes the first available straight feature of the moved conduit run to
accommodate the connection thickness, such as a mating part.
▪ In a partial move, if the connection results in an overlap the software connects the two ends
with a To Do Record to maintain the connectivity.
▪ If there is no space to accommodate mating part, the software does not connect the two
ends and displays a message suggesting that you to connect the ends manually.

Inline Connection
No. Route Object Approval Status Permission Group Access

1 Conduit run A Working Full control/ Write

2 Conduit run B Working Full control/ Write

3 Connection

Result: The software connects the conduits A and B.

Intergraph Smart® 3D Electrical User's Guide 321

 Appendix: Moving at Boundary Connections

No. Route Object Approval Status Permission Group Access

1 Conduit run A Working Full control/ Write

2 Conduit run B Working Full control/ Write

3 Transition mating part connecting the conduits

Result: The software connects the conduits A and B using a mating reducer. Reduction in conduit B length = connection thickness.

Branch Connections
No. Route Object Approval Status Permission Group Access

1 Header run Working Full control/ Write

2 Branch run Working Full control/ Write

3 Horizontal tee connection associated with the header

Result: The software connects the header and branch runs at the tee end feature.

Equipment Connection
No. Route Object Approval Status Permission Group Access

1 Conduit run Working Full control/ Write

Intergraph Smart® 3D Electrical User's Guide 322

 Appendix: Moving at Boundary Connections

2 Equipment Working Full control/ Write

3 Coupling connection

Result: The software connects the conduit run and equipment at the conduit port on the equipment.

Disconnecting cable trays using Move

When you move a cable tray run, the software disconnects all the associated boundary
connections. If you move a header run that is connected to an open-ended branch run, the
branch run follows the header run. If the branch run is not open-ended, the software disconnects
the branch from the header.
If a selection is restricted by adjacent features, use Disconnect to disconnect that selection,
and then use Move to move the selection without disturbing the rest of the network. For
more information, see Disconnect Command (on page 280).
See Also
Cable tray to cable tray connections (on page 324)
Header to branch connections (on page 327)

Intergraph Smart® 3D Electrical User's Guide 323

 Appendix: Moving at Boundary Connections

Cable tray to cable tray connections

No. Route Object Approval Status Permission Group Access

1 Cable Tray A Working Full control/ Write

2 Cable Tray B Non-working -

Result: The software disconnects cable tray A. You can reconnect using Move .

No. Route Object Approval Status Permission Group Access

1 Cable tray A Working Full control/ Write

2 Cable tray B Non-working -

3 Turn feature associated with cable tray A

4 Reducing transition associated with cable turn B

Result: The software disconnects cable tray A. You can reconnect using Move .

Intergraph Smart® 3D Electrical User's Guide 324

 Appendix: Moving at Boundary Connections

No. Route Object Approval Status Permission Group Access

1 Cable tray A Working Full control/ Write

2 Cable tray B Non-working -

3 Reducer associated with cable tray A

Result: The software disconnects cable tray A. You can reconnect using Move .

No. Route Object Approval Status Permission Group Access

1 Cable tray B Working Full control/ Write

2 Cable tray B Non-working -

3 Reducer associated with cable tray B

Result: The software disconnects cable tray A. You can reconnect using Move .

Intergraph Smart® 3D Electrical User's Guide 325

 Appendix: Moving at Boundary Connections

Conduit run to conduit run connections

No. Route Object Approval Status Permission Group Access

1 Conduit run B Non-working -

2 Conduit run A Working Full control/ Write

3 Coupling associated with conduit run A

Result: The software disconnects conduit run A. You can reconnect using Move .

Route Object Approval Status Permission Group Access

No.

1 Conduit run A Working Full control/ Write

2 Conduit run B Non-working -

3 Transition associated with conduit run B

Result: The software disconnects conduit run A. The software generates a To Do Record for the reducer. You can
reconnect using Move .

Intergraph Smart® 3D Electrical User's Guide 326

 Appendix: Moving at Boundary Connections

Header to branch connections

No. Route Object Approval Status Permission Group Access

1 Header run Non-working -

2 Branch run Working Full control/ Write

3 Tee associated with header run

Result: The software disconnects the branch run and header run, but does not delete the tee. You
can reconnect the branch run using Move .

No. Route Object Approval Status Permission Group Access

1 Branch run Working Full control/ Write

2 Header run Non-working -

3 Vertical tee associated with header run

Result: The software disconnects the branch run and header run, but does not delete the tee. You
can reconnect the branch run using Move .

Intergraph Smart® 3D Electrical User's Guide 327

 Appendix: Moving at Boundary Connections

Conduit header to branch connections

No. Route Object Approval Status Permission Group Access

1 Header run Non-working -

2 Branch run Working Full control/ Write

3 Tee associated with header run

Result:: The software disconnects the branch run and header run, and does not delete the tee. You
can reconnect the branch run using Move .

Intergraph Smart® 3D Electrical User's Guide 328

APPENDIX D

Appendix: Cable Autorouting

This section provides a detailed explanation of the process the software steps through to
autoroute cable in the 3D model.

1. When you click Autoroute on the Edit Cable Path ribbon, the software builds one or
more nodal networks that represent all the cableways in the workspace. Each end feature of
the cableway, every branch on the cableway, and every cableway run change are nodes.
Whenever there are more than two paths between any two nodes, the software inserts a
node at an arbitrary point (usually a turn) to split one of the paths (see node M in the
following illustration). A connection is composed of the set of features that make up the path
between two nodes. The total length of cableway is recorded for the connection along with
the allowed signal types as read from the feature’s parent cableway. Consider the following
illustration in which two independent networks (Network 1 and Network 2) represent the
cableway model:

The first time you run the Autoroute command in a session, the cableway
network is created. For a large number of cableways/conduits, this can take several
minutes. The next time you run the Autoroute command, however, the network is not
regenerated unless you select Cableway, conduits, or cables have been modified since
last auto route on the AutoRoute Options dialog box.

Intergraph Smart® 3D Electrical User's Guide 329

 Appendix: Cable Autorouting

2. The software removes connections between nodes if a feature in a connection is full and
Allow overfilling of cabletrays is not selected on the Autoroute Options dialog box.
3. The software removes connections between nodes if you pick a feature in a connection as a
"Do not pass" feature.
Next, the software takes the following steps for each individual cable being routed by a
single execution of the Autoroute command. Each cable in the select set is routed
independently and in a user-defined order.
4. The software removes connections between nodes if the allowed signal type for the
cableway of that connection does not match the signal type of the cable being routed.
If the previously routed cable has the same signal type as the current cable, then
the software skips Step 4. If it has a different signal type, then the network is trimmed
starting from the original network condition at the end of Step 2. This means that you can
save processing time by routing multiple cables with the same signal type at the same time.
5. The networks that have features that are members of connections which have not been
removed/trimmed by the aforementioned rules within the maximum tail length range of both
equipment items are selected for autorouting between equipment 1 and 2.
Using the illustration in Step 1 as an example, only Network 2 has features within the range
of both equipment items. In this example, none of the connections (and hence none of the
features) between nodes were removed due to a cable signal type or "Do not pass" rule.
6. The software finds potential entry/exit points automatically on the closest feature of each
cableway within the maximum tail range based on the cable entry option selected.

▪ If Allow cables to enter from cableway straight feature is selected on the Autoroute
Options dialog box and the maximum tail range is as indicated by the red boxes in the
previous illustration, the blue dots represent the automatically selected possible
entry/exit points on each cableway of Network 2.
▪ You can select a required entry /exit point using Set Entry Point and Set Exit Point
on the Edit Cable Path ribbon. These points apply to all cables that are selected for
autorouting.
7. The software computes the path with the minimum length on the trimmed network between
each possible pair of entry/exit points. The path with the minimum length includes the
ordered set of "go through" features is chosen.

▪ If no path is possible between the entry/exit points that include the "go through"
features, then the autoroute fails and an error message is placed in the log.
▪ You must select the "go through" branch features in the order that the cable must pass
through them, running from the originating equipment to the terminating equipment.
Selecting the "go through" features in order dramatically improves the performance of
the shortest distance calculation because the software need not test all possible
permutations of paths that include the "go through". Dijkstra's algorithm
(http://en.wikipedia.org/wiki/Dijkstra's_algorithm) is used to process the network to find
the minimum length path between the entry/exit points.
▪ If you select the Minimize the cable tail lengths option on the Autoroute Options
dialog box, the software computes the path such that the maximum cable length
remains in the cableway or conduit. The chosen path might not be the shortest path.

Intergraph Smart® 3D Electrical User's Guide 330

 Appendix: Cable Autorouting

8. When you click Finish on the Edit Cable Path ribbon, the fill for every cableway feature in
the automatically selected path of the cable is recalculated and updated in the database.
9. If any cableway feature is full and the Allow Overfill option is not selected in the Autoroute
Options dialog box, the connection containing the feature is removed from the networks
defined in Step 1.

▪ If a cableway feature is not full (this includes adjustment due to Fill Efficiency factor) before
a cable is routed in that cableway, it is assumed that the cable can be routed regardless of
how much space is left. In other words, a cable can overlap (but not fully exceed) the
approximate boundary established by the fill efficiency. In the following illustration, the red
line marks the boundary established by the fill efficiency. The last cable was successfully
routed. Another cable will not be routed in the cableway. The cableway will report a fill
greater than 100%.

▪ The autoroute network with its fill values is stored in memory on your local machine. If you
select Update fill from database on the AutoRoute Options dialog box, updates to the fill
of the cableways that have been made by other users are automatically retrieved from the
database prior to the onset of the autoroute. This focused update is much faster than
running the common Refresh command on your workspace. If you are not using fill or are
sure that no one else is routing cables in your cableways, then selecting the Update fill
from database option will improve performance.
See Also
AutoRoute Options Dialog Box (on page 246)

Intergraph Smart® 3D Electrical User's Guide 331

APPENDIX E

Appendix: Sharing Cable Data with

SmartPlant Electrical
This appendix provides the general workflow for sharing cable data between SmartPlant
Electrical and Smart 3D. If you have access to Intergraph Smart Support
https://smartsupport.intergraph.com, then we highly recommend that you get the latest
integration capability statement. Click View Documentation, and then under Useful Links click
Intergraph Work Process Guides. Scroll down and under the Integration Capability
Statements, select "Sharing Cable Data Between Electrical and 3D Design".

In This Appendix
Overall Workflow............................................................................ 333
Retrieving Cable Data.................................................................... 336
Publishing 3D Data ........................................................................ 341

Intergraph Smart® 3D Electrical User's Guide 332

 Appendix: Sharing Cable Data with SmartPlant Electrical

Overall Workflow

Intergraph Smart® 3D Electrical User's Guide 333

 Appendix: Sharing Cable Data with SmartPlant Electrical

Intergraph Smart® 3D Electrical User's Guide 334

 Appendix: Sharing Cable Data with SmartPlant Electrical

Intergraph Smart® 3D Electrical User's Guide 335

 Appendix: Sharing Cable Data with SmartPlant Electrical

Retrieving Cable Data

In an integrated environment, the Electrical task and SmartPlant Electrical can share a cable
schedule, along with several cable properties.
You can retrieve a cable schedule using the SmartPlant > Retrieve command. Then, you can
view the schedule and create or update cable objects while in the Electrical task within Smart
3D.
If you want to create cables in a specific electrical system, then you should select the system in
the Workspace Explorer before viewing the cable schedule. If you do not select an electrical
system, then the software creates the cables in an electrical system with the same name as the
cable schedule document. If no such system exists, then the software creates one.
Your project may contain pumps with integrated motors or separate motors. Both situations are
handled in the software. When retrieving cable data, Smart 3D searches the cable schedule and
displays the cable connection in the To/From field for the cable connection. If the pump does
not appear in the cable schedule, then the pump is referenced. You can visually see what is
being created with the cable in the To/From field. Upon finding one or the other, a cable is
created and connected to the motor or the pump.

View Cable Schedule

Displays retrieved cable schedules. You must retrieve cable schedules to view or create cables
while in the Electrical task within Smart 3D. You can then update the cables. Use the
SmartPlant > Retrieve command to retrieve electrical documents. This command is only
available if you registered the active model with SmartPlant Foundation in the Project
Management task. For more information on how to retrieve documents, see Retrieve
Documents.
See Also
Cable Schedule Documents Dialog Box (on page 287)
The SmartPlant > View Cable Schedule command displays retrieved cable schedule
documents into the model. The View Cable Schedule command is available only in Electrical
task.
The retrieved cable schedule documents contain cable design basis data. You can select the
retrieved cables, and create them in the 3D model using the cable schedule commands. All the
processed cables will be created under a specified electrical system in the Workspace Explorer.
Before viewing the cable schedule, select an appropriate electrical system in the Workspace
Explorer to create cables under that system. Smart 3D creates the cables with the same name
as in the cable schedule document. If you do not select an electrical system, then Smart 3D
creates a new system with the same name as the cable schedule document, and then creates
cables under the new system.
Smart 3D searches the terminal equipment defined in the cable schedule, and automatically
selects the equipment to which the new cable is connected. If the equipment is not in the model,
then the cable is not created in the model.
You can then select the cables from the Workspace Explorer, and modify as necessary.

Intergraph Smart® 3D Electrical User's Guide 336

 Appendix: Sharing Cable Data with SmartPlant Electrical

Any modifications made to the cables are reflected in the cable schedule only when
you refresh the corresponding cables list.

See Also
Cable Schedule Documents Dialog Box (on page 287)
Cable Schedule Dialog Box (on page 288)
Import cables (on page 286)

Cable Schedule Documents Dialog Box

Displays a list of retrieved cable schedules and their associated properties. Select a schedule,
and then click Open to view the cables.
Name
Displays the name of the document.
Document Type
Displays the type of document.
Document Title
Displays the title of the document.
See Also
Cable Schedule Dialog Box (on page 288)

Intergraph Smart® 3D Electrical User's Guide 337

 Appendix: Sharing Cable Data with SmartPlant Electrical

Cable Schedule Dialog Box

Displays a list of cables in a grid format.
View Cable Schedule Documents
Returns you to the Cable Schedule Documents dialog box. You can also press
BACKSPACE.

Refresh
Updates the cable schedule. After modifying the cables in Smart 3D, click Refresh to reflect
the changes in the cable schedule.
Cable Name
Displays the name of the cable as defined in the design basis data.
Correlation Status
Displays the correlations status of the cable design basis data with corresponding 3D model
data. The colors identify the correlation status of each cable in the model and the design
basis object that corresponds to it.

Default Color Status Description

The cable in the design basis has a

Correlated and up-to- match in the 3D model without any
date discrepancies in the cable data, and the
data is up-to-date.

The cable in the design basis has a

Correlated, Data
match in the 3D model. However, there
Mismatch
are discrepancies in the cable data.

The cable in the design basis does not

Uncorrelated
exist in the 3D model, or is unknown.

The cable metadata in the design basis

Ignored
is ignored.

Part Number
Displays the part number for the cable as defined in the design basis data.
Part Description
Displays the short description of the cable part as defined in the design basis data.

Intergraph Smart® 3D Electrical User's Guide 338

 Appendix: Sharing Cable Data with SmartPlant Electrical

From Device
Displays the cable originating equipment code as defined in the design basis data.
To Device
Displays the cable terminating equipment code as defined in the design basis data.
Signal Type
Displays the type of signal the cable will carry as defined in the design basis data.
Validation Status
Displays the validation status of the selected cable. The following are the available
validation statuses:
Not Validated - Specifies that the cable is not validated. This is the default status.
Invalid - Specifies that the cable is missing a Part Number, From Device, or To Device
data in 3D model. The missing value is highlighted in bold.
Valid - Specifies that the design basis cable has Part Number, From Device, and To
Device data in 3D model.
Validate
Verifies if the selected cable has Part Number, From Device, and To Device data available
in the 3D model.
Process
Imports or updates the selected cables. When you process the cables, the software creates
the cables in 3D model and correlates with corresponding cable design basis data.
View Log
Displays a CreateEFCables.log file. The file contains information about successfully
processed cables, and the cables that could not be processed due to data inconsistencies.
Include up-to-date cables
Appends Correlated and up-to-date cables to the current cable schedule.
Select All
Selects all the cables in the list.
Select Valid Cables
Selects all uncorrelated valid cables in the list.
See Also
Import cables (on page 286)
Cable Schedule Documents Dialog Box (on page 287)

Intergraph Smart® 3D Electrical User's Guide 339

 Appendix: Sharing Cable Data with SmartPlant Electrical

Import cables

▪ You must retrieve at least one cable schedule to view the cable schedule. Use the
SmartPlant > Retrieve command. This command is available only if you have registered
the active model with SmartPlant Foundation in the Project Management. For more
information on how to retrieve documents, see in the Common User's Guide.
▪ Before viewing the cable schedule, select an appropriate electrical system in the
Workspace Explorer to create cables. Smart 3D creates the cables with the same name as
in the cable schedule document. If you do not select an electrical system, then Smart 3D
creates a new system with the same name as the cable schedule document, and then
creates cables under the new system.
▪ Set the Active Permission Group to Electrical and assign the objects that you place in the
model to the Active Permission Group.
1. Click SmartPlant > View Cable Schedule.
2. On the Cable Schedule Documents dialog box, select a cable schedule, and click Open.
3. On the Cable Schedule dialog box, set the Include up-to-date cables option as
necessary.
Include up-to-date cables option allows you to hide the cables that are already
processed and up-to-date.
4. Select cables in the grid.
You can click Select All, or use the CTRL or SHIFT keys to select multiple cables.
5. Click Validate to verify if the Part Number, From Device and To Device exist in 3D model
data.
The selected cable is validated, and its validation status is updated. Any missing data is
highlighted in bold text.
6. Select the validated cable, and then click Process.
For a cable to successfully process, its design basis data displayed on the list
must match with corresponding 3D model data.

▪ When you select a cable on the Cable Schedule dialog box, the corresponding cable is
automatically selected in the Workspace Explorer.

▪ You can Autoroute , or Delete a processed cable without exiting the Cable
Schedule dialog box.
▪ Click View Cable Schedule Documents to return to the cable schedule documents list.
See Also
Cable Schedule Documents Dialog Box (on page 287)
Cable Schedule Dialog Box (on page 288)

Intergraph Smart® 3D Electrical User's Guide 340

 Appendix: Sharing Cable Data with SmartPlant Electrical

Publishing 3D Data
You can publish 3D model data in the Drawings and Reports task or using the Tools > Drawing
Console command. The model can then be viewed through SmartPlant Foundation or
SmartPlant Review. For more information, refer to the Drawings and Reports Help.

3D Model Data
You can create a 3D Model Data component and base it on a specific filter. The filter defines
the contents of the component documents when they are created. You can use the 3D Model
Data component to output Smart Review files or CAD (SAT) files.

Output as Neutral CAD (SAT) Graphics File

You can setup the 3D Model Data component to output your model objects to a neutral CAD
(.sat) file format. Right-click the 3D Model Data component, and select Setup to set the filter and
output file path.

Output as Smart Review File

You can setup the 3D Model Data component to output your model objects as Smart Review
files depending on how you set up the 3D Model Data component. The software creates .vue
and .xml files by default. If you select the Generate streaming vue output (.zvf file) option on
the Setup dialog box, the software creates all three Smart Review files: .zvf, .vue, and .xml.
You can set the output on the 3D Model Data component to save the Smart Review file to disk
only, database only or both.
▪ Select Disk only (do not save to database) to save the generated graphics and data files
to the specified path. You can then update and publish the 3D Model Data files to
SmartPlant Foundation in an integrated environment. This option helps prevent data
congestion by allowing you to save and publish your files locally.
▪ Clear Disk only (do not save to database) and do not specify output paths to save the
data only to the database.
▪ Clear Disk only (do not save to database) and specify the output paths to save the data to
the database, and as files to the specified paths.
The basic workflow for creating a 3D Model Data component is as follows:
▪ Create a 3D Model Data component, and set it up with a filter and output file information.
▪ Create the 3D Model Data document (one document per 3D Model Data component).
Smart Review shows the objects from the .vue file using global coordinates. If
you plan to save the 3D Model Data component documents to a .vue file using the Save as
SmartPlant Review File command, right-click the component and select Properties to
check the Style tab Coordinate System property setting. You want to make sure the Plant
Monument Coordinate Offset is passed correctly to Smart Review when creating the .vue
file. The offset value allows you to see the original coordinates relative to the new Smart
Review coordinate system.
▪ Revise the documents if publishing to SmartPlant Foundation.

Intergraph Smart® 3D Electrical User's Guide 341

 Appendix: Sharing Cable Data with SmartPlant Electrical

▪ Set properties Surface Styles and Aspects properties as needed on the 3D Model Data
documents.
▪ Update the documents using Update Now or Batch > Update on the 3D Model Data
component shortcut menu.
▪ If SmartPlant Foundation requires a password, you are prompted to type it when updating
3D Model Data documents.
▪ Save the documents to a predefined location for viewing in Smart Review or publish the
documents to the registered SmartPlant Foundation plant.

Recommendations for Exporting to Smart Review

▪ The number of objects generated by a 3D Model Data component and exported successfully
to a Smart Review file depends largely on the type of objects and your hardware resources.
We recommend that you limit each 3D Model Data component filter.
▪ Monitor the error logs regularly for resource issues, even if the specified filter worked
initially. You can add more objects to the model meeting the filter criteria.
▪ Smart Review allows you to open multiple .vue files simultaneously. Refer to your Smart
Review documentation for more information. When you open .vue and .xml files in Smart
Review for the first time, Smart Review builds a database containing the tag information for
the files. This process can take a significant amount of time.
▪ Smart Review supports turning Smart 3D aspects on and off. All aspects are turned on by
default in Smart Review. The SPRSchema.txt file can be customized to add any customized
aspects.
The 3D View Control used for viewing the published graphics in SmartPlant Markup
Plus does not currently support turning aspects on and off.

Project Supervisor Setup

Your project supervisor should set up appropriate filters that define the objects to include in the
component documents when they are created.
You must install the SmartPlant Schema Component and the SmartPlant Client to use this
component.

3D Model Data Component Common Tasks

The following tasks are used to set up a 3D Model Data component and configure it for viewing
in Smart Review or publishing.

Define Your Workspace

The defined workspace does not need to include objects being manipulated for Smart Review.

Setup a 3D Model Data Component

You can create and set up a 3D Model Data component to create Smart Review output files or
neutral CAD (SAT) graphics files.

Intergraph Smart® 3D Electrical User's Guide 342

 Appendix: Sharing Cable Data with SmartPlant Electrical

Create the 3D Model Data Document

To create the 3D Model Data document, right-click the component and select the Create
Drawing command. When this command is complete, the document is listed in the Detail View.

Set Surface Style Rules and Aspects for 3D Model Data Documents
Before you update your 3D Model Data documents, set the surface style rules and aspects to
use for the model objects. You can specify the properties for the 3D Model Data component
and documents by right-clicking and selecting Properties.

Update 3D Model Data Documents

Update your 3D Model Data documents using Update Now or Batch > Update on the
component or document shortcut menu.

Save Data as a Smart Review File

You can output your 3D Model Data to a Smart Review (.vue) file whether you are working in a
stand-alone or integrated environment.

Set Revision Information

The document revision process is separate from the publishing process, making it possible to
revise a document locally and save it to the database without re-publishing the document.

Publish Data
If your model has been registered using the SmartPlant Registration Wizard, you can publish
your 3D Model data for retrieval in other tools.

Setup (3D Model Data Component)

Sets options for a 3D Model Data component. This command is available on the shortcut menu
on a 3D Model Data component.
Setup Dialog Box (3D Model Data Component) (on page 344)
With this command, you specify a filter that identifies the objects you want collected by the 3D
Model Data component. You have several combination options for output of the objects:
▪ SmartPlant Review graphics file (.vue)
▪ CAD output file (.sat)
The CAD export function supports the following:
▪ Color information and transparency values - The software can retrieve color information
and transparency values from the styles and apply them to the .sat file. If no style is
selected, the default 3D object style is applied. If there is no style associated with an
object, green is applied by default.

Intergraph Smart® 3D Electrical User's Guide 343

 Appendix: Sharing Cable Data with SmartPlant Electrical

You do not need to define the workspace or verify that the workspace contains all the
objects required by the 3D Model by Query filter subset.

▪ You can publish .zvf files and launch SmartPlant Review to view the .zvf files. You can also
use File > View and Markup to use SmartPlant Markup Plus to navigate the model. You do
not have to use the Save as SmartPlant Review command to use the SmartPlant Review
features.
▪ After you create a component, you must update the documents to extract the data from the
database to create the .vue, .zvf, and .xml files.

Setup Dialog Box (3D Model Data Component)

Sets options for the 3D Model Data component. You access this dialog box when you right-click
a 3D Model Data component and select Setup on the shortcut menu.
Filter
Identifies the filter to use to define the objects to include in the component definition. The
filter needs to be specific to the objects that you want to publish or to save to a SmartPlant
Review file.
You do not need to define the workspace to contain all the objects required by the
3D Model Data filter subset.

Options
Specifies how the 3D Model Data is saved. The setup for your 3D Model Data component is
different depending on whether or not you are registered to work in an integrated environment.
Generate SmartPlant Review output (.vue file)
Indicates that you want the 3D Model Data saved as a SmartPlant Review .vue file.
Generate streaming vue output (.zvf file)
Indicates that you want the 3D Model Data saved as a .zvf file in addition to a .vue file.
Check this option if you intend to attach this data as a reference to another plant. The .zvf
format allows you to attach this plant data as a reference to another plant using Reference
3D functionality.
Generate CAD output (.sat file)
Indicates that you want the 3D Model Data saved as an SAT graphics file.
Disk only (do not save to database)
Specifies how the graphics and/or data files are saved:
▪ Select Disk only (do not save to database) to save the files only to the specified path.
You can then update and publish the .vue or .zvf file to SmartPlant Foundation from the
designated locations.
▪ Clear the Disk only (do not save to database) and do not specify output paths for the
data to only be saved to the database.
▪ Clear the Disk only (do not save to database) and specify the output paths to save
the data to the database and as files to the specified paths.

Intergraph Smart® 3D Electrical User's Guide 344

 Appendix: Sharing Cable Data with SmartPlant Electrical

You can change this option at any time during your work so that you can determine the best
save and publish options for your specific environment.
Path to save graphics file
Specifies the file to which the graphics for the 3D Model Data will be saved. Click the ellipsis
button to browse for the correct file.
Path to save data file
Specifies the file to which the data will be saved. Click the ellipsis button to browse for the
correct file. This box is automatically populated, and the ellipsis button does not display
when you specify a .vue file. For example, if you specify C:\temp\tpjtest.vue in the Path to
save graphics file box, then the Path to save data file box automatically displays
C:\temp\tpjtest.xml.

▪ You can publish .zvf files and launch SmartPlant Review to view the .zvf files from within
SmartPlant Foundation. You do not have to use the Save as SmartPlant Review command
to use the SmartPlant Review features. For more information on publishing, see Publish.
▪ For more information about the SmartPlant Registration Wizard, see Working in an
Integrated Environment in the Intergraph Smart® 3D Installation Guide, available from Help
> Printable Guides.
See Also
Setup (3D Model Data Component) (on page 343)
Setup a 3D Model Data component (on page 345)
3D Model Data Component Common Tasks (on page 342)

Setup a 3D Model Data component

The 3D Model Data component is used with the Save as SmartPlant Review and Publish
commands. It is also used to output model graphics to neutral CAD (.sat) files. Before creating a
3D Model Data component, you should create filters that specify the objects required for your
output.
1. Right-click a folder in the Console.
To add a folder, right-click the root or another folder.
2. On the shortcut menu, select New.
The Add Component dialog box displays.
3. Select the 3D Model Data component, and click OK.
4. Right-click the new 3D Model Data component and then select Setup.
5. Specify a filter to identify the model data to include when the data is saved or published.
Select More to display the Select Filter dialog box. Click Properties to display the
current filter properties.
6. If you need to output the 3D Model Data to SmartPlant Review, select Generate
SmartPlant Review output (.vue file). If you need to output the data as a neutral CAD
format graphics file (.sat file), select the Generate CAD output (.sat file) option.
7. Select or clear the Disk only (do not save to database) option to specify how to save the
3D Model Data. If you are registered in an integrated environment, checking this option
allows you to update and publish the output files to SmartPlant Foundation.

Intergraph Smart® 3D Electrical User's Guide 345

 Appendix: Sharing Cable Data with SmartPlant Electrical

When saving as SmartPlant Review files, the behavior of the 3D Model Data
setup is different depending on whether you are registered to work in an integrated
environment or not. For more information on how this option affects the saved data, see
Setup Dialog Box (3D Model Data Component) (on page 344). For more information on
registering your model using the SmartPlant Registration Wizard, see the section titled
Working in an Integrated Environment in the Intergraph Smart® 3D Installation Guide,
available from the Help > Printable Guides command.
8. Specify file paths for the data file and the graphics file as needed.
9. Click OK to save the component settings and create the output files as specified.

▪ After you create a component, you must update the documents to extract the data from the
database and create the .vue, .zvf, and .xml files. For more information on tasks associated
with the 3D Model Data component, see 3D Model Data Component Common Tasks (on
page 342).
▪ If you are setting up the 3D Model Data component with the intention of saving it as a
SmartPlant Review (SPR) file, right-click the component and select Properties and go to
the Style tab to make sure the Coordinate System property is set appropriately so that the
Plant Monument Coordinate Offset is passed correctly to SPR when creating the VUE file.
This is because SPR shows the objects from the VUE file using global coordinates. The
offset value allows you to see the original coordinates relative to the new SPR coordinate
system. For more information on 3D Model Data components, see 3D Model Data (on page
341). For information on saving to SPR, see Save as SmartPlant Review File.
▪ If you are setting up the 3D Model Data component for output to the CAD format graphics
file, you can export color and transparency style rules along with the objects to the SAT file
when it is created. To set the style for export, right-click the 3D Model Data component and
select Properties. Go to the Surface Styles and Aspects tab, select the style and click
Add. This property tab includes the style rules that are created in the Common task. You
can also create new styles by clicking New. After the style is set, right-click the 3D Model
Data component and select Update Now to create the SAT file with the specified style.
▪ Because the AutoCAD software can open only SAT files of version 5, the ACIS version in
the SAT file is written as 5 by default. If you want to output the current ACIS version, contact
Intergraph Support (https://hexagonppm.com/ppm-support) or your local office.
▪ For the SAT output, all the bodies are merged and then saved to the SAT file. If you are
using viewers, such as MicroStation, that cannot open merged bodies, contact Intergraph
Support (https://hexagonppm.com/ppm-support) or your local office.
See Also
Setup (3D Model Data Component) (on page 343)

Intergraph Smart® 3D Electrical User's Guide 346

Glossary
abstract part
A part that is only defined by a partial specification and that cannot be materially provided by the
organization that defines the specification.
Active Template Library (ATL)
Set of class templates and wizards supplied with Microsoft C++ Version 5.0 and later. You can
use an ATL when you create ActiveX controls and any other type of object that uses the
Component Object Model (COM). Using an ATL is generally preferred over Microsoft
Foundation Classes (MFC), because the implementations are smaller, easier to use, and more
closely tied to the COM model.
airway
A user-defined path for routing cables outside of a cableway. Examples include jumping
between trays, drop-offs to equipment, and so forth.
ampacity
The current-carrying capacity, expressed in amperes, of a wire or cable under stated thermal
conditions.
angle
The circular measurement taken from the intersection of two pipes at a turn or branch.
approval state
Recorded state of acceptance of information contained in objects within the database. The
approval states indicate a level of confidence in the information stored in the database and
govern your ability to alter specific data about a product.
arrangement (accommodation)
Those components of a system arranged in three-dimensional space with accurate dimensional
representation for installation. Various types include electrical, HVAC, machinery, outfitting, and
piping.
arrangement (electrical)
Electrical system arranged in three-dimensional space with accurate dimensional representation
for installation. This arrangement is generally shown as a wireway or trunk that contains cable
from multiple systems.
attribute
A single type of non-graphics information that is stored about an object such as diameter or end
preparation.

Intergraph Smart® 3D Electrical User's Guide 347

 Glossary

axis
An imaginary line used to define the orientation of a system or object normally defined in terms
of an x-, y-, and z-axis. Some 3-D graphic objects have an associated axis used to define the
center or axis for rotations.
basic design
Engineering definition of the model and its systems.
bill of material (BOM)
Hierarchical decomposition of a product into constituent assemblies and parts. Specific types of
BOMs exist (for example, an EBOM is a bill of material from the point of view of an engineering
department; an MBOM is a bill of material from the point of view of manufacturing).
bulkload
The process by which reference data in Microsoft Excel workbooks is loaded into the Catalog
database.
bus
A conductor, or group of conductors, that serve(s) as common connector for two or more
circuits.
busbar
A conducting bar that carries heavy current to supply several electric circuits.
cabinet
An enclosure designed either for surface or flush mounting and provided with a frame, mat, or
trim in which a swinging door or doors may be hung. See also enclosure.
cable
A conductor with insulation, or a stranded conductor with or without insulation and other
coverings (single-conductor cable) or a combination of conductors insulated from one another
(multiple-conductor cable). See also optical cable.
cable core binder
A wrapping of tapes or cords around the several conductors of a multiple-conductor cable used
to hold them together.
Cable core binder is usually supplemented by an outer covering of braid, jacket, or
sheath.
cable filler
The material used in multiple-conductor cables to occupy the interstices formed by the assembly
of the insulated conductors, thus forming a cable core of the necessary shape (usually circular).
cable hanger
Description of all physical cableway supports.

Intergraph Smart® 3D Electrical User's Guide 348

 Glossary

cable jacket
A protective covering over the insulation, core, or sheath of a cable.
cable schedule
A list of cables for a given unit or project. A cable schedule includes cable names, cable parts,
termination information, and electrical service levels.
cable shielding
A nonmagnetic, metallic material applied over the insulation of the conductor or conductors to
confine the electric field of the cable to the insulation of the conductor or conductors.
cable terminal
A device which provides insulated egress for the conductors.
cableway
Cableways are logical objects used in the 3D model to reserve space for cable trays and cable.
The reserved space also allows interference checking along the route. That is, if any other
object is in the same space, a clash results which can be resolved in the modeling phase.
Cableway is synonymous with, and is used instead of, raceway or wireway.
cableway load
Weight per unit length supported by a cableway segment.
catalog
Repository of information about components and materials used in construction. When you use
catalog parts in the model, the software places an occurrence of the catalog part in the project.
This occurrence is a copy of the actual catalog part.
Catalog database
The database that contains the reference data. Each model database can reference a different
Catalog database.
chain
A set of continuous and tangent segments.
change history
Process of recording information such as who, when, and why for any given modification.
change management
Software features or manual procedures for managing the consequence of change. For
example, software can support a change management feature to report drawings that need
updating as a result of a change in a 3-D model.
change propagation
Ability of the software to intelligently modify dependent design information to reflect change in a
higher order object.

Intergraph Smart® 3D Electrical User's Guide 349

 Glossary

channel (electrical)
1) A single path for transmitting electric signals, usually in distinction from other parallel paths. 2)
A band of frequencies.
circuit
A conductor or system of conductors through which an electric current is intended to flow.
circuit breaker
A device used to open and close a circuit by non-automatic means, and to open the circuit
automatically on a predetermined overload of current, without injury to itself when properly
applied within its rating.
circular bar
A structural shape referring to a cylindrical solid.
class
Grouping of individual objects that share some very significant, common characteristics.
classification folder
A folder in the Catalog hierarchy that contains part classes. Classification folders are one level
above part classes. The ClassNodeType and R-ClassNodeDescribes sheets in the Microsoft
Excel workbooks define the classification folders.
codelist
A set of acceptable values for a particular property that can be referred to by an index number or
selected in a combo box. For example, the codelist for the material specification allows you to
select from a set of standard entries, such as ASTM A183-F316 Stainless Steel.
commodity code
A user-defined code that provides an index to parts in a catalog.
commodity item
A standard component found in a manufacturer catalog (an off-the-shelf component).
component
Physical part that a feature generates.
concurrent access
Ability of the software to allow multiple users to simultaneously access and modify the design of
a model.
conductor
1) A substance or body that allows a current of electricity to pass continuously along it. 2) A wire
or combination or wires not insulated from one another, suitable for carrying an electric current.
It may be bare or insulated.

Intergraph Smart® 3D Electrical User's Guide 350

 Glossary

conduit (flexible)
Conduit built up of spiral metal strips that interlock. It is not moisture proof and hence cannot be
used where the action of any considerable amount of moisture is objectionable.
conduit (rigid)
Conduit that is fireproof, moisture proof, reliable, and mechanically strong. This type of conduit is
generally employed when wires are installed in cableways.
conduit body
A separate portion of a conduit or tubing system that provides access through a removable
cover(s) to the interior of the system at a junction of two or more sections of the system or at a
terminal point of the system.
conduit fitting
An accessory that serves to complete a conduit system, such as bushings and access fittings.
conduit seal
A sealed fitting designed to contain an explosion in the enclosure to which it is attached and to
minimize passage of flammable gases or vapors from one location to another.
consolidated tasks
A collection of tasks that can be run in batch. For example, the software allows you to extract a
set of drawings immediately or to schedule the batch extraction for a future time.
constraints
A logical restriction that controls how part symbols' ports relate to each other and to reference
ports. There are four constraints: parallel, perpendicular, coincident, and distance.
contract
A Work Breakdown Structure object representing a scope of work, usually performed by an
external supplier. The contract is related to a project and appears in the Work Breakdown
Structure hierarchy.
coordinate
The location of a point along the X-, Y-, or Z-axis.
coordinate system
A geometric relation used to denote the location of points in the model. The most common
coordinate system is the rectangular coordinate system, whereby points are located by
traversing the X-, Y-, and Z-axes of the model. Normally, coordinate systems have their origin
defined as 0,0,0.
cutting plane
A plane that cuts through an object.
damage records
Data relating to the damage and repair of structure or components that occurred during or after
construction of a model.

Intergraph Smart® 3D Electrical User's Guide 351

 Glossary

data interchange
Capability to output the design, or portions of the design, in a standard format for use or
movement to another computer software system.
database
Repository for the product model data. The database contains information to describe individual
objects in the data model and the relationships between objects as appropriate.
database backup
Process of recording a backup copy of the complete database or the incremental changes after
the date that the last complete copy was created.
database break and recovery
Utilities used to restore a database after files are corrupted.
database copy
Functionality to copy large collections of model objects from one design project to another
design project.
database management
Functionality related to managing a product model database.
database monitor record
Transactions that occur in order to provide database (DB) recovery after a stop in response with
a minimum of lost data.
degree
The highest polynomial factor in the curve or surface mathematical definition. A line is a degree
1 curve, while a cubic B-spline is a degree 3 curve.
de-rating factor
A factor that reduces the current-carrying capacity (ampacity) of a cable due to its method of
installation. This factor is affected by the size and type of tray or conduit, whether or not the
cables are installed in air or laid in the ground, ambient temperature, proximity of cables with
one another, and so forth. This de-rating factor does not apply to cable tray; it is a factor applied
to each cable depending on the method of installation.
design alternative
Difference in a design represented by a separate version. A design alternative can be a new
design prepared as a proposed change, or one of several elective options that the builder or
customer selects. Each design alternative has an identification assigned so you can uniquely
refer to the design alternatives.
design approval log
Record of review and approval of parts of the design.
design data auto input
Automation in loading existing design data into a new design database.

Intergraph Smart® 3D Electrical User's Guide 352

 Glossary

design documents
Drawings, sketches, material lists, procedures, and so forth that are generated during the design
phase.
design object
Any object with properties that you can select. A design object can be related to one or more
contracts of different types, but related only to one contract of a given type.
design progress check
Analysis of the content of the design to some metric unit that gives an idea of the degree of
completion.
design review
Functionality to support rapid viewing of the design and markup of features with comments.
design service
Any general system services related to the design function.
design standard
Feature or object used in model design that has been determined to the normal or approved
way of accomplishing a design requirement. In the context of computer software, the term refers
to computer functionality to support standards, not the standard itself.
detail schedule
Lowest level of schedule used to manage and track work progress.
diagram (2-D)
Diagram that shows the topology, functional components, wiring connections, and special
requirements of an electrical or electronics system. Generally represents the engineering design
of the system.
distributed systems
Systems consisting of sequential parts with a distributive characteristic (for example, pipes
distribute fluids, HVAC distributes air, cabling distributes power, and structure distributes loads).
distribution systems
Term synonymous and used interchangeably with the term distributed systems.
division
Intersection in a cableway at which the cross section divides into two or more individual
cableways.
documentation
Drawings and other records that you must produce to document, obtain approval, or build the
design.

Intergraph Smart® 3D Electrical User's Guide 353

 Glossary

drawing tool
Tool that helps in the process of creating, modifying, or manipulating objects. Examples are
PinPoint and SmartSketch.
duct bank
A concrete-encased underground container used for laying conduits for electric and telephone
lines, as well as other utilities. In general, two or more conduits routed side-by-side create a
bank. Duct banks are generally sloped to drain off condensation.
easting
A term that describes an east coordinate location in a coordinate system.
edge
A topological object that represents a trimmed curve bounded by a start and end vertex.
edge distance
The distance from the center of a bolt or rivet to the edge of a plate or flange.
electromagnetic interference (EMI)
Undesirable coupling of electrical, magnetic, or radio wave energy between electrical circuits or
cables causing unwanted effects on systems and on electrical or electronic components.
enclosure
A surrounding case or housing used to protect the contained conductor or equipment and
protect personnel from contacting live parts.
equipment catalog
Catalog of equipment geometry and limited properties that the software uses to identify and
visualize equipment and its placement in the model. The catalog is not the source for the total
specification and ordering data for the object.
fabricate
To cut, punch, and sub-assemble members in the shop.
face-to-face
The overall length of a component from the inlet face to the outlet face.
fasteners
Bolts and rivets used to connect structural members.
element
Primitive geometric shape such as a line, circle, or arc.
feeder
▪ A set of conductors originating at a main distribution center and supplying one or more
secondary distribution centers, one or more branch-circuit distribution centers, or any
combination of these two types of equipment.

Intergraph Smart® 3D Electrical User's Guide 354

 Glossary

▪ All circuit conductors between the service equipment, or the generator switchboard, and the
final branch-circuit overcurrent device.
fence
Boundary or barrier that separates or closes off an area. To surround or close like a fence.
field adjustment
Material added to the neat design geometry of piping or structural parts to allow for extra
material when it is required due to uncontrolled variance in the manufacturing and construction
process.
fill calculations
Computations that find the percent fill of cable tray or conduit. In the software, these calculations
comply with the National Electric Code. It is possible to modify the delivered algorithm to satisfy
other standards. Fill information can be viewed on fill reports. In addition, maximum fill is stored
on the straight features in the model, and you can view this information on ribbons or property
pages.
fill efficiency
A factor that provides for future expansion of cable. The user enters this factor. It allows the user
to ensure that there is always spare capacity in the cable tray or conduit. For example, a fill
efficiency set to 80% denotes that a run of cable tray should be considered full when 80% of the
allowable cable is contained in the tray.
fill factor
The percentage of the tray or conduit that you allow to be filled with cables. A percentage of free
space is defined to allow for power cable spacing needs, snaking of cables, allowances for
bending radii on the tray, and for future expansion.
fitting
An accessory such as a locknut, bushing, or other parts of a wiring system that is intended
primarily to perform a mechanical rather than an electrical function.
flavor
A different variation of a symbol. Each variation has different occurrence property values.
focus of rotation
A point or line about which an object or view turns.
full penetration weld
A type of weld in which the weld material extends through the complete thickness of the
components being joined.
function points
Part of the requirements documentation, function points are the smallest granularity of a
requirement statement that describe specific detailed actions that the software performs.

Intergraph Smart® 3D Electrical User's Guide 355

 Glossary

functional block diagram

Schematic representation of a system (piping, electrical, ventilation) showing system parts and
their relationship. You use symbols to represent equipment and components. A connecting
network of lines illustrates their relationship. Taken together, the symbols and the network
illustrate the function of the system.
furnishings
Parts such as movable articles and fittings that normally are not associated with a system (for
example, a chair).
generic specific
Object that is parametrically defined or defined to suit a family of specific parts (for example,
International Standards parametrics). For example, a 100 - 200 gpm pump in the catalog can
provide a general shape to appear in the model until a specific object has been identified.
ground
A conducting connection, whether intentional or accidental, by which an electric circuit or
equipment is connected to the earth, or to some conducting body of relatively large extent that
serves in place of the earth.
GUIDs
Acronym that stands for Globally Unique Identifiers. The software automatically creates the
GUIDs sheet in the Excel workbooks when you create the Catalog database and schema. The
purpose of storing GUIDs within Excel workbooks is to help you keep track of what has been
loaded into the database. Storing GUIDs also helps to avoid the situation in which a
replacement Catalog database causes existing models to become invalid.
host location
The first location created for a Site. This host location is defined when the Database Wizard
creates the Site database.
host server
The database server on which the Site database was created using the Database Wizard.
Alternatively, if it is a restored database set, the Host Server is the database server where the
Site database is restored. The Host Server in a Workshare environment contains the origin for
the Site, Site Schema, Catalog, and Catalog Schema databases. Consequently, most Project
Management and reference data work must take place at the Host.
impedance
A measure of the total opposition to current flow in an alternating-current circuit, equal to the rms
electromotive force in the circuit to the rms current produced by it, and usually represented in
complex notation as Z = R + iX, where R is the ohmic resistance and X is the reactance.
initial design
Early stage of design work, generally before contract, used to estimate construction costs and
provide a rough concept of the intended model. Contains information relating to a model created
during its initial (concept) design period.

Intergraph Smart® 3D Electrical User's Guide 356

 Glossary

initial structural plan

Principal structural plan for the model; also called a construction profile.
instantiation
Occurrence of a catalog object at a specific geometric location in the model.
insulation
The part that is relied upon to insulate the conductor from other conductors, conducting parts, or
from ground.
insulation level
An insulation strength, expressed in terms of a withstand voltage.
interference checking
A process that identifies possible collisions or insufficient clearance between objects in the
model.
job order
Industrial authorization for accomplishing work; synonymous with a work order.
junction box
A box with a blank cover that serves the purpose of joining different runs of cableway or cable
and provides space for the connection and branching of enclosed conductors.
kinematics analysis
Analysis of mechanical motion.
ksi
Kips per square inch.
leg length analysis
Preferred term is welding length analysis.
library
Resource of reference information that you can access in developing a model design.
life cycle database
Information developed to assist in the maintenance and modernization of delivered models.
link
Way to store information about another file in your document. You can update a link so that
changes in the file appear in your document.
lintel
A horizontal member used to carry a wall over an opening.

Intergraph Smart® 3D Electrical User's Guide 357

 Glossary

load (electrical)
1) A device that receives power or the power or apparent power delivered to such a device. 2)
The electric power used by devices connected to an electrical generating system.
load group
A grouping in which all components feature uniform load limits and stress safety characteristics.
For example, if a pipe clamp from load group 5 has a maximum nominal load of 20kN, then so
does a threaded rod from load group 5.
location
A Location is defined by three user-defined inputs: 1) a unique name, 2) a unique name rule ID,
and 3) the server where the Site databases reside for that Location. A Location is defined and
created when the Site database is created using the Database Wizard. Additional Locations can
be created in the Project Management task. Each Location is a Site-level object, thus other
Models within the same Site collection can use the Locations when the Models are configured
for Workshare.
logical member
An object in the model used to represent the design topology.
lug (electrical)
A wire connector device to which the electrical conductor is attached by mechanical pressure or
solder.
machinery
Major pieces of equipment installed in a model.
macro
A sequence of actions or commands that can be named and stored. When you run the macro,
the software performs the actions or runs the commands. You can create the macros in Visual
Basic or other OLE-aware programming applications. Some of the other OLE-aware
programming applications are Visual Basic for Applications, Visual C++, and so forth.
maintenance envelope
A rectangular box around the part for clearance during maintenance operations.
maintenance records
Records of breakdown, repair, and overhaul of equipment.
manhole (electrical)
More accurately termed splicing chamber or cable vault, a subsurface chamber, large enough
for a man to enter, in the route of one or more conduit runs and affording facilities for placing
and maintaining in the runs, conductors, cables, and any associated apparatus.
master run
The cableway run along which a set of cableways is routed.

Intergraph Smart® 3D Electrical User's Guide 358

 Glossary

material analysis
Analysis of a completed design work for extracting detailed material requirements; also called
material lists.
material list
An option category that controls the format and content of the bill of materials.
methods
Objects in the database that describe the manufacturing methods to the component parts of a
model.
move from point
Starting point for an action. For example, when you move an equipment object, the Move From
point determines the point of origin for the move.
move to point
Ending point for an action. For example, when you move an equipment object, the Move To
point determines where you want the move to stop.
MTO neutral file
A non-graphic output file that can be fed into a material control system. MTO stands for Material
Take-Off.
node
▪ One of the set of discrete points in a flow graph.
▪ A terminal of any branch of a network or a terminal common to two or more branches of a
network.
▪ An end point of any branch or a network or graph, or a junction common to two or more
branches.
northing
A term that describes a north coordinate location in a coordinate system.
nozzle
A piping connection point to a piece of equipment.
nozzle standout
The shortest allowable distance between the connection point of a nozzle and the start point of a
turn on the leg connected to the nozzle.
NPD (Nominal Piping Diameter)
The diameter of a pipe.
object
A type of data other than the native graphic format of the application.

Intergraph Smart® 3D Electrical User's Guide 359

 Glossary

occurrence (of part or equipment)

Instantiation of a part of equipment in the model that refers to the part library; an instance of a
specific object. The design can be built several times, and therefore the occurrence can apply to
more than one hull. Typically, an occurrence points back to a specific object, either for its
complete definition, as in the case of a particular valve, or for its made from material, as in the
case of a steel plate part cut from sheets. Thus, when a designer selects a component from the
catalog and places it at a location in the space of the model, the software creates an occurrence
of that object in the model design.
occurrence property
A characteristic that applies to an individual object in the model. Occurrence properties are
designated with 'oa:' in the reference data workbooks. You can view and modify occurrence
properties on the Occurrence tab of the properties dialog boxes in the software. Depending on
the object, some occurrence properties are read-only.
optical cable
A fiber, multiple fibers, or fiber bundle in a structure fabricated to meet optical, mechanical, and
environmental specifications.
origin
In coordinate geometry, the point where the X-, Y-, and Z-axes intersect.
origin point
The point at which the coordinate system is placed, providing a full Cartesian coordinate system
with positive and negative quadrants. Points are placed at coordinates relative to the origin
point, represented by the X, Y, and Z values.
orthogonal
The characteristic of an element consisting completely of elements positioned at 90-degree
angles. A square is an orthogonal element.
orthographic
A depiction of an object created by projecting its features onto a plane along lines perpendicular
to the plane.
P&ID
Diagram that shows the topology, functional components, and special requirements of a piping
system; generally represents the engineering design of the system.
package
Set of closely related classes. (UML)
painting
Computation of paint surface and recording of paint system requirements.
parallel cable
A group of cables routed together. The child cables all have the same part number, terminating
devices, and path.

Intergraph Smart® 3D Electrical User's Guide 360

 Glossary

paralleled cable
A cable that has identical siblings that have the same part number and follow the same path. A
paralleled cable must have at least one sibling and be the child of a parallel cable object.
parameter
A property whose value determines the characteristics or behavior of something.
part class
A group of similar objects. You can define part classes in the Excel workbooks. A part class can
have multiple parts. For example, a heat exchanger part class can contain heat exchangers with
different dimensions.
part number
Unique identifier of a part.
path (electrical)
1) A line connecting a series of points in space and constituting a proposed or traveled route. 2)
The set of links and junctions joined in series to establish a connection.
PDS (Plant Design System)
A comprehensive, intelligent, computer-aided design and engineering application for the
process, power, and marine industries. PDS consists of integrated 2-D and 3-D modules that
correspond to engineering tasks in the design workflow.
PinPoint
Tool that allows you to place, move, and modify elements with precision, relative to a reference
point.
principle of superposition
The principle that states that the stresses, strains, and displacements due to different forces can
be combined. This principle is only valid for linear analysis.
Product Data Management (PDM) System
Software intended to manage both product data and documents associated to the product data.
Functionality typically includes: object-based data modeling tools, user administration, business
rules, and document management. Document management typically includes document editing
or reviewing, document mark-up or redline, document storage, and full-text retrieval.
product structure
Hierarchical breakdown or decomposition of a product into constituent parts, volumes, or units.
(For example, a bill of material is one possible type of product structure.)
production planning
Functionality associated with the work breakdown and sequence of the construction of a model.
promotion
Process of associating approval state with a product version. A product version begins its
existence at a working approval state. When the version is at some level of maturity, its approval

Intergraph Smart® 3D Electrical User's Guide 361

 Glossary

state is elevated to a higher approval state (that is, promoted). Then, further changes must be
carefully controlled and generally require the data set demoted to a working state. One or more
promotions can occur successively higher approval states (between working and approved) to
represent various intermediate levels of review or progressive approval.
pull box
A box with a blank cover that is inserted in one or more runs of cableway to facilitate pulling in
the conductors, and may also serve the purpose of distributing the conductors.
pulling tension
The longitudinal force exerted on a cable during installation.
query select sets
Set of objects that are selected in a query or queries on the database.
reactance
1) The imaginary part of impedance. 2) Opposition to the flow of alternating electric current
caused by the inductance and capacitance in a circuit.
reel
The quantity of wire wound on a reel.
reference data
The data that is necessary to design plants or ships using the software. Reference data includes
graphical information, such as symbols. It also contains tabular information, such as physical
dimensions and piping specifications.
resistance
That physical property of an element, device, branch, network, or system that is the factor by
which the mean-square conduction current must be multiplied to give the corresponding power
lost by dissipation as heat or as other permanent radiation or loss of electromagnetic energy
from the circuit.
resource estimation
Rough estimate of material, manpower, and facility utilization for the design and construction of
the model.
route
1) A line connecting a series of points in space and constituting a proposed or traveled route. 2)
The set of links and junctions joined in series to establish a connection.
S3D cable connector
A cable connector is the object at the end of a cable that is used to connect the cable to another
cable or a piece of equipment.
S3D cable end
A cable end is the cable path feature where the cable terminates.

Intergraph Smart® 3D Electrical User's Guide 362

 Glossary

S3D cable feature

A cable is a bound or sheathed group of mutually insulated conductors.
S3D cable marker
Cable markers are placed on cableways or conduit features to designate the path of the cables.
After being placed, the cable markers can be used to describe a cable path on a cable-routing
report.
S3D cable nozzle
A cable nozzle, or port, defines the connection location between a cable and a piece of
equipment.
S3D cable run
The length of a cable, from start to finish, is called a cable run. A cable run defines the
relationship of the cable to other objects in the model, such as electrical cabinets and
equipment.
S3D cable straight
A cable in cableway segment is the cableway path feature that the cable is routed through.
S3D cable tray component
Cable tray components are the turns, reducers, wyes, and other parts that comprise a cable
tray.
S3D cable tray distribution connection
A distribution connection contains the connection information between two cable tray parts.
S3D cable tray part
Cable tray parts are the straight tray pieces that define a cable tray.
S3D cable tray specification
A cable tray specification defines the material and service for a cable tray run.
S3D cable tray support
A cable tray support holds a cable tray suspended from a structure.
S3D cableway along leg feature
An along leg feature is a logical object that represents a feature along the leg of a cableway,
such as a tee or a wye.
S3D cableway branch feature
A cableway branch feature is a logical object that represents a branch in the cableway.
S3D cableway end feature
A cableway end feature is a logical object that represents either end of a cableway. You select
end features to connect cableway runs.

Intergraph Smart® 3D Electrical User's Guide 363

 Glossary

S3D cableway features

Cableway features are logical objects that represent turn, straight, end, and branch portions of
cableways.
S3D cableway parts
Cableway parts are the pieces that define a cableway.
S3D cableway slant transition feature
A cableway slant transition feature is an object that represents a change in the cross-section of
the cableway.
S3D cableway straight feature
A cableway straight feature is an object that represent a straight section of a cableway.
S3D cableway transition feature
A cableway transition feature is an object that represents a change in the cross-section of the
cableway.
S3D cableway turn feature
A cableway turn feature is an object that composes part of a cableway and represents a change
in direction for the cableway.
S3D cableway turn transition
A cableway turn transition feature is an object that composes part of a cableway and represents
a change in direction and cross-section for the cableway.
S3D conduit along leg feature
A conduit along leg feature is a logical object on a straight section of conduit that represents a
branch, transition, or reducer.
S3D conduit branch feature
A conduit branch feature is the high-level design object for tees and wyes. The branch feature
contains the part information for the tee or wye.
S3D conduit component
A conduit component is a logical object that reference a coupling or union on the conduit.
S3D conduit end feature
A conduit end feature is a logical object that represent either end of a conduit. You select end
features to connect conduit runs.
S3D conduit features
Conduit features are logical objects that represent turn, straight, end, and branch portions of
conduit.

Intergraph Smart® 3D Electrical User's Guide 364

 Glossary

S3D conduit nozzle

A conduit nozzle, or port, defines the connection location between a conduit and a piece of
equipment. The software automatically places a connection part based on the default part listed
in the catalog. The part generation depends on the connecting end preparations and the conduit
properties.
S3D conduit run
A conduit run is a connected series of features that usually have the same specification. A
conduit run includes straight features; along-leg features such as branches, transitions, and
reducers; turn features; and end features.
S3D conduit straight feature
A conduit straight feature is an object that represents a straight section of a conduit.
S3D conduit support
A conduit support holds a conduit suspended from a structure.
S3D conduit system
A conduit system is a collection of conduit runs. The conduit system specifies the default
specification for conduit runs in that system.
S3D conduit turn feature
A conduit turn feature is an object that composes part of a conduit run and represents a change
in direction for the conduit.
S3D connection support component
Connection support components are structural members used in creating hangers.
satellite server
The database server where the replicated databases reside for Workshare. The Satellite Server
is not used unless Workshare is activated.
schema
A database that creates the structure of another database. For example, a schema specifies the
queries, tables, fields, and data types in a database.
schema update utility
Functionality used to assist in processing existing product models to an updated database
structure after you modify or add to the database structure.
service
The conductors and equipment for delivering electric energy from the secondary distribution or
street main, or other distribution feeder, or from the transformer, to the wiring system of the
premises served.
shield
As normally applied to instrumentation cables, refers to metallic sheath (usually copper or
aluminum), applied over the insulation of a conductor or conductors for the purpose of reducing

Intergraph Smart® 3D Electrical User's Guide 365

 Glossary

electrostatic coupling between the conductors, which may be susceptible to or which may be
generating unwanted electrostatic fields.
side-wall pressure
The crushing force exerted on a cable during installation.
site
The top level in the Project Management hierarchy. A Site configuration may contain several
Catalogs, each shared by multiple Models.
site administrator
Person responsible for managing the standards and general parameters for a given model site
within a Site database.
site setup
Functionality associated with establishing a new model site or hull for design development.
sketch and trace
User interface for rough definition of a required design feature that typically works in a 2-D
mode.
slave run
The cableway run(s) that follow a master run as it is routed, following the same path offset by a
constant distance.
specifications
Contracted requirements for the model.
splice (electrical)
The physical connection of two or more conductors to provide electrical continuity.
station
User-defined point with a unique name on an object, such as a trunk, that identifies where other
objects can pass through it; also called route numbers.
stud
A bolt, threaded on both ends, used to connect components.
suspended floor
A concrete floor system built above and off the ground.
switchgear
A general term covering switching and interrupting devices and their combination with
associated control, metering, protective, and regulating devices; also assemblies of these
devices with associated interconnections, accessories, enclosures and supporting structures,
used primarily in connection with the generation, transmission, distribution, and conversion of
electric power.

Intergraph Smart® 3D Electrical User's Guide 366

 Glossary

symmetric node
Type of vertex on a curve. A curve with a symmetric node has the same curvature on each side
of the node. A handle can be attached to a symmetric node for editing.
system
A conceptual design grouping that organizes parts in hierarchical relationships. A system
represents a functional view of the model and includes information such as system name, type,
properties, and design specifications for the objects assigned to the system.
tag number
User-specific, unique number assigned to an object (for example, CV-101 for a control valve,
HE-2002 for a heat exchanger).
target point
The origin for coordinate measurements displayed by PinPoint. You can position the target point
anywhere on the drawing sheet or view.
terminal block
An insulating base equipped with terminals for connecting secondary and control wiring.
tolerant geometry
A type of ACIS geometry - either an edge or a vertex - that is outside the tolerance for ACIS and
requires special handling.
trimmed surface
A surface whose boundary is fully or partially inside the "natural" geometric definition of the
surface. Some or the entire control polygon extends outside the face boundary.
trunk
Feature that quickly reserves space for the distributive systems and other systems that have a
path. Along the trunk are stations that define the cross section and identify part or system
membership.
unit/module modeler
Facility of the system to structure collections of equipment and components into a single
identifiable object.
user attributes
A customized property in the reference data. The Custom Interfaces sheets in the Excel
workbooks define these properties. You can list the customized properties on the individual part
class sheets.
version control
Ability of the system to manage multiple versions of a single part of the design. Version control
should support conditional analysis and promotion status, as well as alternate design features
among hulls within a model site.

Intergraph Smart® 3D Electrical User's Guide 367

 Glossary

vertex
A topological object that represents a point in the three-dimensional model.
viewset
Set of objects (usually a subset of the entire database) that a view operation uses. Membership
or lack of membership for any object in a viewset does not affect the actual stored
representation of the object, but only its availability or desirability for viewing in the current
scenario.
voltage drop
The difference of voltages at the two terminals of a passive impedance.
weight and CG analysis
Routines that compute the weight of commodity materials as configured in a given design (for
example, plate and pipe) and determine total weight and center of gravity (CG) for a collection of
material and equipment, as well as the complete model.
welding
Weld requirements for joining materials. Welding length analysis is the calculation of required
weld dimensions; also called leg length analysis.
wirebody
A topological object that represents a collection of edges jointed at their common endpoints.
wireways
Sheet-metal troughs with hinged or removable covers for housing and protecting electric wires
and cables and in which conductors are laid in place after the wireway has been installed as a
complete system.
wizard
Software routine attached to an application that provides guidance and expert help to you to
complete one of the functionalities of the application.
work content
Estimation development of metrics from the database that relates to the work hour content of the
various construction units.
work order
Plant authorization for completing work; synonymous with a job order.
working plane
The available 2-D plane of movement for endpoint selection.
workset
Set of objects (usually a subset of the entire database) used in an interactive change, add, or
delete operation. Membership or lack of membership for any object in a workset does not
necessarily affect the actual stored representation of an object. However, you can change or
delete an object in a workset that also results in a change or deletion of the stored object.

Intergraph Smart® 3D Electrical User's Guide 368

 Glossary

Similarly, when you add a new object (not currently stored) to a workset, the software also adds
the object container.
workspace
Area that represents the portion of the model data needed to perform the intended task and
includes the user modeling settings.
workspace document
Document into which you can extract a portion of the model data for a user task.
Workspace Explorer
Tree or list representation of objects in your workspace.

Intergraph Smart® 3D Electrical User's Guide 369

Index
cable hanger • 348
3 cable jacket • 349
3D Model Data • 341 Cable Marker Properties Dialog Box • 252
3D Model Data Component Common Tasks Cable Properties Dialog Box • 234
• 342 cable schedule • 349
Cable Schedule Dialog Box • 288, 338
A Cable Schedule Documents Dialog Box •
287, 337
abstract part • 347
Cable Selection Dialog Box • 245
Active Template Library (ATL) • 347
cable shielding • 349
Add conduits to a duct bank • 143
cable terminal • 349
airway • 347
Cable Tray Component Properties Dialog
ampacity • 347
Box • 113
angle • 347
Cable Tray Part Properties Dialog Box • 113
Appendix
Cable tray to cable tray connections • 306,
Cable Autorouting • 329
324
Deleting at Boundary Connections • 306
Cable Trays • 17
Moving at Boundary Connections • 317
Cables • 225
Property Dialog Boxes • 290
cableway • 349
Sharing Cable Data with SmartPlant
Cableway Along Leg Feature Properties
Electrical • 332
Dialog Box • 113
approval state • 347
Cableway End Feature Properties Dialog
arrangement (accommodation) • 347
Box • 115
arrangement (electrical) • 347
cableway load • 349
attribute • 347
Cableway Properties Dialog Box • 116
Auto Connect Cableways • 199
Cableway Settings Dialog Box • 98
AutoRoute • 245
Cableway Straight Feature Properties
AutoRoute Options Dialog Box • 246
Dialog Box • 120
axis • 348
Cableway Transition Feature Properties
Dialog Box • 123
B Cableway Turn Feature Properties Dialog
Barriers Tab (New Cableway Dialog Box) • Box • 125
111 Cableway Turn Transition Feature
basic design • 348 Properties Dialog Box • 128
bill of material (BOM) • 348 Cableways • 16
Branch cableway from a conduit end Cabling • 22
feature • 80 catalog • 349
Branch cableway from a turn feature • 79 Catalog database • 349
Branch duct banks • 94 chain • 349
bulkload • 348 Change duct bank turn angle • 95
bus • 348 change history • 349
busbar • 348 change management • 349
change propagation • 349
C channel (electrical) • 350
Choose a working plane • 84
cabinet • 348 circuit • 350
cable • 348 circuit breaker • 350
cable core binder • 348 circular bar • 350
cable filler • 348 class • 350

Intergraph Smart® 3D Electrical User's Guide 370

 Index

classification folder • 350 Cross Section Tab (Cableway Settings

codelist • 350 Dialog Box) • 101
commodity code • 350 Cross Section Tab (Cableway Straight
commodity item • 350 Feature Properties Dialog Box) • 122
component • 350 Cross Section Tab (Cableway Transition
concurrent access • 350 Feature Properties Dialog Box) • 124
conductor • 350 Cross Section Tab (Cableway Turn Feature
conduit (flexible) • 351 Properties Dialog Box) • 127
conduit (rigid) • 351 Cross Section Tab (Cableway Turn
conduit body • 351 Transition Feature Properties Dialog Box)
Conduit Branch Feature Properties Dialog • 129
Box • 159 Cross Section Tab (Transition Settings
Conduit Component Properties Dialog Box • Dialog Box) • 183
160 cutting plane • 351
Conduit End Feature Properties Dialog Box
• 162 D
conduit fitting • 351
Conduit header to branch connections • damage records • 351
314, 328 data interchange • 352
Conduit Part Properties Dialog Box • 163 database • 352
Conduit Run Properties Dialog Box • 163 database backup • 352
Conduit run to conduit run connections • database break and recovery • 352
309, 326 database copy • 352
conduit seal • 351 database management • 352
Conduit Settings Dialog Box • 150 database monitor record • 352
Conduit Straight Feature Properties Dialog Default Property Values Tab • 292
Box • 166 Defaults Tab (Cableway Settings Dialog
Conduit Turn Feature Properties Dialog Box Box) • 102
• 168 Defaults Tab (Conduit Settings Dialog Box)
Conduits • 19 • 153
Configuration Tab • 290 Define cable tray barriers • 84
Connect conduit end features • 143 Define settings for cableway • 84
Connecting cable trays or cableways using Definition Tab • 292
Move • 317 Definition Tab (Equipment Properties Dialog
Connecting conduit runs using Move • 321 Box) • 223
Connection Tab • 223 degree • 352
Connections Tab • 292 Delete a cable marker • 252
consolidated tasks • 351 Delete a cable run • 231
constraints • 351 Delete a cable tray barrier • 49
contract • 351 Delete a cable tray with barriers • 49, 85
coordinate • 351 Delete a cableway branch • 49
coordinate system • 351 Delete a cableway run • 48
Copy a cable run • 231 Delete a cableway transition • 50
Copy a cableway run • 78 Delete a cableway turn • 50
Copy a conduit run • 149 Delete a component • 196
Copy a duct bank • 95 Delete a conduit branch • 50
Copy cable path • 243 Delete a conduit run • 50
Create a cable • 230 Delete a conduit turn • 51
Create a transition • 177 Delete a duct bank • 51
Create a transition while routing • 178 Delete a parallel cable • 232
Create new cableway • 76 Delete a paralleled cable • 232
Create new conduit • 141 Delete a straight cableway feature • 49
Delete a straight conduit • 50

Intergraph Smart® 3D Electrical User's Guide 371

 Index

Delete conduit from duct bank • 51 Edit component properties • 195

Delete Route Objects • 47 Edit conduit branch feature properties • 57
de-rating factor • 352 Edit conduit end feature properties • 58
design alternative • 352 Edit conduit part properties • 58
design approval log • 352 Edit conduit run properties • 57
design data auto input • 352 Edit conduit straight feature properties • 57
design documents • 353 Edit conduit turn feature properties • 57
design object • 353 Edit equipment properties • 210
design progress check • 353 Edit equipment relationships • 211
design review • 353 Edit parallel cable properties • 231
design service • 353 Edit paralleled cable properties • 231
design standard • 353 Edit Properties • 53
detail schedule • 353 Electrical • 12
diagram (2-D) • 353 Electrical Common Tasks • 64
Disconnect a cableway • 281 Electrical Workflow • 64
Disconnect a cableway feature • 282 electromagnetic interference (EMI) • 354
Disconnect a conduit feature • 283 enclosure • 354
Disconnect a conduit run • 281 equipment catalog • 354
Disconnect a set of cableway features • 283 Equipment Properties Dialog Box • 213
Disconnect a set of conduit features • 284 Extend an existing conduit run • 149
Disconnect Command • 280 Extend existing cableway • 80
Disconnecting cable trays using Move • 323 Extend or shorten duct bank • 95
distributed systems • 353
distribution systems • 353 F
division • 353
documentation • 353 fabricate • 354
drawing tool • 354 face-to-face • 354
duct bank • 354 fasteners • 354
Duct Bank Tab (New Cableway Dialog Box) feature • 354
• 108 feeder • 354
Duct Banks • 24 fence • 355
Duct Banks at Pull Pits • 202 field adjustment • 355
fill calculations • 355
fill efficiency • 355
E fill factor • 355
easting • 354 fitting • 355
edge • 354 flavor • 355
edge distance • 354 Flip a cableway part while routing • 81
Edit cable marker properties • 251 Flip a routed cableway tee • 82
Edit Cable Path • 236 focus of rotation • 355
Edit cable path manually • 239 full penetration weld • 355
Edit cable path using AutoRoute • 241 function points • 355
Edit cable properties • 231 functional block diagram • 356
Edit cable tray part properties • 56 furnishings • 356
Edit cableway along-leg feature properties •
56 G
Edit cableway end feature properties • 56
Edit cableway properties • 55 General Tab (Cable Marker Properties
Edit cableway straight feature properties • Dialog Box) • 252
56 General Tab (Cableway Along Leg Feature
Edit cableway transition feature properties • Properties Dialog Box) • 113
56 General Tab (Cableway End Feature
Edit cableway turn feature properties • 55 Properties Dialog Box) • 115

Intergraph Smart® 3D Electrical User's Guide 372

 Index

General Tab (Cableway Properties Dialog Insert a cable tray component • 190
Box) • 116 Insert a cableway component in free space
General Tab (Cableway Settings Dialog • 192
Box) • 98 Insert a component while routing • 194
General Tab (Cableway Straight Feature Insert a conduit component • 191
Properties Dialog Box) • 120 Insert a conduit component in free space •
General Tab (Cableway Transition Feature 193
Properties Dialog Box) • 123 Insert a single cable tray split • 259
General Tab (Cableway Turn Feature Insert a single cableway split • 260
Properties Dialog Box) • 125 Insert Cable • 229
General Tab (Cableway Turn Transition Insert Cable Marker • 249
Feature Properties Dialog Box) • 128 Insert Component • 185
General Tab (Conduit Branch Feature Insert Component Settings Dialog Box • 196
Properties Dialog Box) • 159 Insert multiple cable tray splits • 257
General Tab (Conduit Component Insert Split • 254
Properties Dialog Box) • 160 Insert Transition • 170
General Tab (Conduit End Feature instantiation • 357
Properties Dialog Box) • 162 insulation • 357
General Tab (Conduit Run Properties insulation level • 357
Dialog Box) • 163 Insulation Tab • 224
General Tab (Conduit Settings Dialog Box) interference checking • 357
• 150
General Tab (Conduit Straight Feature J
Properties Dialog Box) • 166
General Tab (Conduit Turn Feature job order • 357
Properties Dialog Box) • 168 Join a cableway from a nozzle or port • 271
General Tab (Insert Component Settings Join a conduit from a nozzle or port • 276
Dialog Box) • 196 Join a conduit from a nozzle or port at a
General Tab (Transition Settings Dialog branch point • 278
Box) • 182 Join cableway from a nozzle or port at a
generic specific • 356 branch point • 273
Get Cableways • 59 Join two existing cableways • 270
Get Conduit Runs • 59 Join two existing cableways at a branch
Get Connected Supports • 60 point • 270
Get Continuously Connected • 60 Join two existing conduits • 275
Get Features • 61 Join two existing conduits at a branch point
Get Runs • 63 • 275
ground • 356 junction box • 357
GUIDs • 356
K
H kinematics analysis • 357
Header to branch connections • 311, 327 ksi • 357
host location • 356
host server • 356 L
leg length analysis • 357
I library • 357
impedance • 356 life cycle database • 357
Import cables • 286, 340 link • 357
initial design • 356 lintel • 357
initial structural plan • 357 load (electrical) • 358
Insert a cable marker • 250 load group • 358
location • 358

Intergraph Smart® 3D Electrical User's Guide 373

 Index

logical member • 358 NPD (Nominal Piping Diameter) • 359

lug (electrical) • 358
O
M object • 359
machinery • 358 occurrence (of part or equipment) • 360
macro • 358 occurrence property • 360
maintenance envelope • 358 Occurrence Tab • 300
maintenance records • 358 Occurrence Tab (Equipment Properties
manhole (electrical) • 358 Dialog Box) • 213
master run • 358 optical cable • 360
material analysis • 359 Order features for autorouting cable • 243
material list • 359 Order of Way Features Dialog Box • 245
Merge two duct bank segments • 201 origin • 360
methods • 359 origin point • 360
Modify a duct bank • 93 orthogonal • 360
Modify cable tray barriers • 85 orthographic • 360
Modify cableway feature cross section Overall Workflow • 333
shape • 81
Modify multiple cableway cross section P
sizes • 81
Move a cable marker • 252 P&ID • 360
Move a cableway branch • 34 package • 360
Move a cableway component • 45 painting • 360
Move a cableway run • 34 parallel cable • 360
Move a cableway turn • 37 Parallel Cable Tab (Cable Properties Dialog
Move a conduit branch • 43 Box) • 234
Move a conduit component • 46 paralleled cable • 361
Move a conduit end • 44 Paralleled Cable Tab (Cable Properties
Move a conduit run • 38 Dialog Box) • 234
Move a conduit turn • 42 parameter • 361
Move a set of cableway features • 36 part class • 361
Move a set of conduit features • 41 part number • 361
Move a straight cableway feature • 35 path (electrical) • 361
Move a straight conduit • 39 PDS (Plant Design System) • 361
Move a transition • 37 Permission Groups and Routing • 27
Move duct bank • 45 PinPoint • 361
move from point • 359 Place components while routing cableway •
move to point • 359 77
Moving Route Objects • 29 Place components while routing conduit •
MTO neutral file • 359 144
Multi-Route Tab (New Cableway Dialog Place doors from the catalog • 208
Box) • 107 Place Equipment • 203
Place equipment from the catalog • 206
Place windows from the catalog • 209
N Preface • 11
New Cableway Dialog Box • 103 principle of superposition • 361
New Conduit Run Dialog Box • 153 Product Data Management (PDM) System •
node • 359 361
northing • 359 product structure • 361
Notes Tab • 299 production planning • 361
nozzle • 359 promotion • 361
nozzle standout • 359 Publishing 3D Data • 341

Intergraph Smart® 3D Electrical User's Guide 374

 Index

pull box • 362 S3D cable straight • 363

pulling tension • 362 S3D cable tray component • 363
S3D cable tray distribution connection • 363
Q S3D cable tray part • 363
S3D cable tray specification • 363
query select sets • 362 S3D cable tray support • 363
Quick Route • 263 S3D cableway along leg feature • 363
S3D cableway branch feature • 363
R S3D cableway end feature • 363
reactance • 362 S3D cableway features • 364
reel • 362 S3D cableway parts • 364
reference data • 362 S3D cableway slant transition feature • 364
Relationships Tab • 300 S3D cableway straight feature • 364
Re-route part of a path • 244 S3D cableway transition feature • 364
resistance • 362 S3D cableway turn feature • 364
resource estimation • 362 S3D cableway turn transition • 364
Retrieving Cable Data • 336 S3D conduit along leg feature • 364
Rotate a conduit component • 195 S3D conduit branch feature • 364
route • 362 S3D conduit component • 364
Route a sloped duct bank • 93 S3D conduit end feature • 364
Route Cableway • 66 S3D conduit features • 364
Route cableway with an offset • 78 S3D conduit nozzle • 365
Route cableways automatically • 200 S3D conduit run • 365
Route Conduit • 131 S3D conduit straight feature • 365
Route conduit with a cardinal point offset • S3D conduit support • 365
148 S3D conduit system • 365
Route conduit with an external offset • 146 S3D conduit turn feature • 365
Route duct bank • 92 S3D connection support component • 365
Route Multiple, Parallel Cableway Runs • satellite server • 365
87 schema • 365
Route Selection Commands • 58 schema update utility • 365
Route side-by-side cableways • 89 Select cableway cross section properties •
Route stacked cableways • 88 85
Route Tab (Cable Properties Dialog Box) • Select Cableway Dialog Box • 112
235 Select Conduit Dialog Box • 157
Route using an existing cableway • 76 Select Equipment Dialog Box • 211
Route using an existing conduit run • 143 Select Insulation Material Dialog Box • 96,
Routing Cable Example • 227 220
Routing Cable in Disconnected Networks • Select Part Dialog Box • 181
227 Select Part Number Dialog Box • 232
Routing Cables in Cable Tray with Barriers • Select System Dialog Box • 305
229 Sequence a cable tray • 262
Routing Cableways and Cable Trays • 75 Sequence a conduit • 262
Routing Duct Banks • 91 Sequence a WBS item • 262
Sequence Objects • 261
service • 365
S Set alignment options • 180
S3D cable connector • 362 Set avoidance features • 242
S3D cable end • 362 Set Offset Reference Dialog Box
S3D cable feature • 363 (Cableway) • 86
S3D cable marker • 363 Set Offset Reference Dialog Box (Conduit) •
S3D cable nozzle • 363 157
S3D cable run • 363

Intergraph Smart® 3D Electrical User's Guide 375

 Index

Set positioning relationships for equipment • W

207
weight and CG analysis • 368
Set View by Cable • 247
welding • 368
Set way features • 242
What's New in Electrical • 11
Setup (3D Model Data Component) • 343
wirebody • 368
Setup a 3D Model Data component • 345
wireways • 368
Setup Dialog Box (3D Model Data
wizard • 368
Component) • 344
work content • 368
shield • 365
work order • 368
side-wall pressure • 366
working plane • 368
site • 366
workset • 368
site administrator • 366
workspace • 369
site setup • 366
workspace document • 369
sketch and trace • 366
Workspace Explorer • 369
slave run • 366
specifications • 366
Specify Slope Direction Dialog Box (Duct Z
Bank) • 96 Zoom to cable • 248
splice (electrical) • 366
station • 366
stud • 366
suspended floor • 366
switchgear • 366
symmetric node • 367
system • 367

T
tag number • 367
target point • 367
terminal block • 367
The Routing Paradigm • 14
tolerant geometry • 367
Transfer Ownership Dialog Box • 291
Transition Settings Dialog Box • 182
trimmed surface • 367
trunk • 367

U
Undo Disconnection • 284
unit/module modeler • 367
user attributes • 367

V
version control • 367
vertex • 368
View Cable Schedule • 285, 336
Viewing Retrieved Cables • 285
viewset • 368
voltage drop • 368

Intergraph Smart® 3D Electrical User's Guide 376