DEUTSCH

• Environmentally sealed – IP68, IP6K9K, when

installed to manufacturer's specifications.
• 2, 3, 4, 6, 8 and 12 cavity arrangements.
• Latched mating.
• Wedgelocks ensure contact alignment
and retention.
• Accepts size 16 contacts, each with 13A
continuous capacity.
• Available in kits with Solid Green Band, Solid –
DT Series

Gold plated, and F-Crimp contact options.

• CAT-Spec kit option.
• Kits available containing all components
required to make one (half kits), or both sides
of a connection.
• The P012 enhanced seal is now standard for
the DT Series 2 & 3 cavity plugs.

Housing : Thermoplastic
Seal : Silicon Rubber
Wedgelock : Thermoplastic
Contact Size : 16
Contact Rating : 13A @ 125°C
Shock : 50G
Vibration : 20G rms 10 – 2000Hz
Approvals : 20mm Flame Test per Standard UL-94
Ingress Protection : IP68, IP6K9K
Operating Temperature : -55­­°C to 125°C

Part Numbering System

DT 04 – 08 P A – L012
Series Prefix :
Popular Special Modifications :
DT Series – DT
blank – No modification.
Connector Style : C015 – Reduced diameter seal (E Seal).
E004 – Black connector body.
Receptacle – 04 E005 – Protective end cap. Black.
E008 – Heat shrink adaptor.
EP06 – Enhanced front seal (P012) and end cap.
Plug – 06
EP08 – Enhanced front seal (P012) and end cap. Black.
2 L012 – Flange Mount receptacle.
3 P012 – Enhanced front seal.
Number of 4
Cavities : 6 For a complete list of special modifications
contact your nearest reseller.
08
12

Keying Options :
2 & 3 Cavity Plugs & Wedgelocks blank – no keying
A – Grey housing Keying Option is only
available with 08 and
B – Black housing 12 cavity housings.
C – Green housing
D – Brown housing
The P012 enhanced seal is now standard for
the DT Series 2 & 3 cavity plugs.
P – Pins
The orange 2 & 3 cavity wedgelocks are no longer Contact Type
used, replaced with the green P012 wedgelocks. S – Sockets

8
 DEUTSCH

DT0X- 2 X DT0X- 3 X DT0X- 4 X DT0X- 6 X DT0X- 08 X X DT0X- 12 XX

2 x size 16 3 x size 16 4 x size 16 6 x size 16 8 x size 16 12 x size 16

A, B, C, D A, B, C, D

DT Series – Popular Components

Receptacle Components Plug Components
Circuits
Housing Wedgelock Size 16 Pin – Nickel Circuits Housing Wedgelock Size 16 Socket – Nickel
2 DT04-2P W2P 0460-202-16141 2 DT06-2S W2S-P012 0462-201-16141
AWG16-20 / 0.5-1.0mm2 AWG16-20 / 0.5-1.0mm2
3 DT04-3P W3P 3 DT06-3S W3S-P012
Green Band Green Band
4 DT04-4P W4P 4 DT06-4S W4S
0460-215-16141 0462-209-16141
6 DT04-6P W6P AWG14 / 1.0-2.0mm2 6 DT06-6S W6S AWG14 / 1.0-2.0mm2

8 DT04-08PA W8P 8 DT06-08SA W8S

114017 114017
12 DT04-12-PA W12P Sealing Plug 12 DT06-12SA W12S Sealing Plug

For complete details on contacts & further options see page 63.

'CAT-Spec' Modifications Popular Special Modifications

DT04-2P-E008
E008
Heat shrink adaptor.

DT04-4P-C015
DT04-3P-E005 DT06-6S-EP06 DT06-12SA-EP08 C015
Reduced diameter seal (E Seal)
Black. cavity for use with thin wall cable.
Rear end cap.
Improved seal retention (plugs).

The DT Series connector housings with suffix E005, L012

EP06 & EP08 are typically referred to as ‘CAT-Spec’,
Flange mount DT04-2P-L012
short for CATERPILLAR Specification.
receptacle.
These modified housings are used on most
CATERPILLAR mining machinery as an OEM standard
connector.
DT06-6S-P012
At a glance, they are black and feature a cap on the Shown with
W6S-P012
rear to retain the connectors' rear wire seal. The plugs wedgelock
include improved seal retention by using the P012
wedgelock.

E005 – Receptacles only. Black. P012

Enhanced front seal. Provides an ultra tight
EP06 – Plugs only. 2, 3, 4 & 6 cavity are black. environmental seal. Used in conjunction with P012
8 & 12 cavity are grey – this makes them exempt from wedgelocks to enhance seal retention during mating
being 'CAT-Spec'. and unmating.
EP08 – Plugs only. 8 & 12 cavities only. Black. Black housing excluding 8 and 12 cavity, where the
colour is based on keying.
All 2 & 3 cavity DT Series connectors now feature the
P012 seal as standard. All 2 & 3 cavity wedgelocks are
P012 (green) as standard.

9
 DEUTSCH

• Environmentally sealed – IP68, IP6K9K, when

installed to manufacturer's specifications.
• 2, 3, 4, 6, 8 and 12 cavity arrangements.
• Latched mating.
• Accepts size 16 contacts, each with 13A
continuous capacity.
Flange Mount

Housing : Thermoplastic
Seal : Silicon Rubber
Wedgelock : Thermoplastic
DT04-2P-L012
Contact Size : 16
Contact Rating : 13A @ 125°C
Shock : 50G
Vibration : 20G rms 10 – 2000Hz
Approvals : 20mm Flame Test per Standard UL-94
Ingress Protection : IP68, IP6K9K
Operating Temperature : -55­­°C to 125°C

DT Series – Flange Mount (L012)

No. of Cavities
2 3 4 6 8 12
DT04-2P-L012 DT04-3P-L012 DT04-4P-L012 DT04-6P-L012 DT04-08PA-L012 DT04-12PA-L012

DT Series – Flange Mount – Gaskets

No. of Cavities
2 3 4 6 8 12
— DT3P-L012-GKT DT4P-L012-GKT — DT8P-L012-GKT DT12P-L012-GKT

10
 DEUTSCH

• Transparent housing with integrated LED on

wedgelock for quick circuit diagnosis.
• Colour coded wedgelocks for operating

DT Detector Half Kits

voltages, 12V (yellow) and 24V (red).
• Joint retention fingers allow both contacts to
be removed at the same time.
• Compatible with Pulse Width Modulated
control.
• Sold as complete kit including nickel plated or
green band contacts.
• Environmentally sealed – IP68, IP6K9K, when
installed to manufacturer's specifications.
• Industry proven DT Series.
• Latched mating.

Housing : Ultem
Seal : Silicon Rubber
Wedgelock : Thermoplastic
Contact Size : 16
Contact Rating : 13A @ 125°C
Shock : 50G
Vibration : 20G rms 10 – 2000Hz
Approvals : 20mm Flame Test per Standard UL-94
Ingress Protection : IP68, IP6K9K
Operating Temperature : -55­­°C to 125°C

W2S-SDT-24V

Half Kits
Half Kits contain all
components to make one W2S-SDT-12V DT06-2S-SDT-CE27
half of a connection.
Each kit contains
2 x contacts and a DT
Detector receptacle with
a DT Detector Wedgelock.

DTLED-24V-1 DTLED-12V-4

DT Detector Half Kits

Wedgelock Wire Size
Part No. Voltage Socket Type
Colour AWG mm2
DTLED-12V-1 12 Yellow 0462-209-16141 – Green Band, Nickel Plating 14 1.0 – 2.0
DTLED-24V-1 24 Red 0462-209-16141 – Green Band, Nickel Plating 14 1.0 – 2.0

DTLED-12V-3 12 Yellow 0462-201-16141 – Nickel Plating 16 – 20 0.5 – 1.0

DTLED-24V-3 24 Red 0462-201-16141 – Nickel Plating 16 – 20 0.5 – 1.0

DTLED-12V-4 12 Yellow 0462-209-1631 – Green Band, Gold Plating 14 1.0 – 2.0

DTLED-24V-4 24 Red 0462-209-1631 – Green Band, Gold Plating 14 1.0 – 2.0
Kits Contain:
1 x DT Detector Receptacle (DT06-2S-SDT-CE27)
1 x DT Detector Wedgelock (W2S-SDT-12V or W2S-SDT-24V)
2 x Solid Socket

11
 DEUTSCH

DT Series – Pack Quantities – Housings

Receptacles Plugs
Cavities Part No. 10 50 100 Bulk Box Cavities Part No. 10 50 100 Bulk Box
DT04-2P • • • 1000 DT06-2S • • • 1800
DT04-2P-C015 • — — 1000 DT06-2S-C015 • • — 1800
2 DT04-2P-E005 • • • 950 2 DT06-2S-E008 • • • 1200
DT04-2P-E008 • • • 800 DT06-2S-EP06 • • • 1600
DT04-2P-L012 • • — 400
DT04-3P • • • 850 DT06-3S • • • 1400
DT04-3P-C015 • — — 850 DT06-3S-C015 • • — 1400
DT04-3P-E005 • • • 800 DT06-3S-E008 • • • 900
DT04-3P-E008 • • • 600 DT06-3S-EP06 • • • 1200
3 3
DT04-3P-L012 • • — 450 DT06-3S-EP09 • — • 1100
DT04-3P-P006 • • • 750 DT06-3S-EP11 • — — 900
DT04-3P-P007 • • — 200 DT06-3S-P006 • — — 1000
DT06-3S-PP01 • — — 1000
DT04-4P • • • 700 DT06-4S • • • 1200
DT04-4P-C015 • • — 700 DT06-4S-E008 • — • 800
DT04-4P-E005 • • • 700 DT06-4S-EP06 • • • 1000
4 4
DT04-4P-E008 • • • 500
DT04-4P-EP13 • — • 700
DT04-4P-L012 • • — 350
DT04-6P • • • 600 DT06-6S • • • 900
DT04-6P-C015 • — — 600 DT06-6S-C015 • — — 900
DT04-6P-E005 • • • 500 DT06-6S-E008 • • • 550
6 DT04-6P-E008 • • — 450 6 DT06-6S-EP06 • • • 800
DT04-6P-EP13 • — — 500
DT04-6P-EP14 • — — 500
DT04-6P-L012 • • — 400
DT04-08PA • • • 350 DT06-08SA • • • 550
DT04-08PA-C015 • — — 350 DT06-08SA-C015 • — — 550
8 DT04-08PA-E005 • • — 300 8 DT06-08SA-E008 • • — 400
DT04-08PA-E008 • — — 250 DT06-08SA-EP06 • — — 500
DT04-08PA-L012 • — — 200 DT06-08SA-EP08 • • — 500
DT04-12PA • • — 300 DT06-12SA • • — 500
DT04-12PA-C015 • — — 300 DT06-12SA-C015 • — — 500
DT04-12PA-E005 • • — 250 DT06-12SA-E008 • • — 350
DT04-12PA-E008 • — — 250 DT06-12SA-EP06 • — — 450
12 12
DT04-12PA-L012 • — — 200 DT06-12SA-EP08 • • — 450
DT04-12PB • — — 300 DT06-12SB • — — 500
DT06-12SB-EP06 • — — 450
Bulk Boxes are available for the complete range of DT06-12SC • — — 500
DEUTSCH upon request, lead times may apply.
DT06-12SD • — — 500

12
 DEUTSCH

Size 16 Green Band Contacts

Size 16 solid contacts are available to suit 2 wire sizes.
Contacts with the Green Band marking accept the
larger wire size of AWG14 / 1.0 – 2.0mm².
DT3 DT8-4-CAT

DT Series – Pack Quantities – Kits

Cavities Connector Type Contact Type (Size 16) Part No. 10 100 500 1000
F-Crimp DT2 — — — —
Solid – Green Band DT2-1 • • • •
Standard
Solid DT2-3 — — — —
Solid – Green Band Gold Plated DT2-4 — — — —
Standard – A Keying Solid – Green Band DT2A-1 — — — —
2
Heat Shrink Adaptor Solid – Green Band DT2-1-E008 — — — —
Black Solid – Green Band DT2-1B — — — —
Black – A Keying Solid – Green Band DT2A-1B — — — —
Solid – Green Band DT2-1-CAT — — — —
CAT-Spec
Solid – Green Band Gold Plated DT2-4-CAT — — — —
F-Crimp DT3 — — — —
Solid – Green Band DT3-1 • • • —
Standard
Solid DT3-3 — — — —
3
Solid – Green Band Gold Plated DT3-4 — — — —
Solid – Green Band DT3-1-CAT — — — —
CAT-Spec
Solid – Green Band Gold Plated DT3-4-CAT — — — —
F-Crimp DT4 — — — —
Solid – Green Band DT4-1 • • • —
Standard
Solid DT4-3 — — — —
4
Solid – Green Band Gold Plated DT4-4 — — — —
Solid – Green Band DT4-1-CAT — — — —
CAT-Spec
Solid – Green Band Gold Plated DT4-4-CAT — — — —
F-Crimp DT6 — — — —
Solid – Green Band DT6-1 • • — —
Standard
Solid DT6-3 — — — —
6
Solid – Green Band Gold Plated DT6-4 — — — —
Solid – Green Band DT6-1-CAT — — — —
CAT-Spec
Solid – Green Band Gold Plated DT6-4-CAT — — — —
F-Crimp DT8 — — — —
Solid – Green Band DT8-1 • • — —
Standard
Solid DT8-3 — — — —
8
Solid – Green Band Gold Plated DT8-4 — — — —
Solid – Green Band DT8-1-CAT — — — —
CAT-Spec
Solid – Green Band Gold Plated DT8-4-CAT — — — —
F-Crimp DT12 — — — —
Solid – Green Band DT12-1 • • — —
Standard
Solid DT12-3 — — — —
12
Solid – Green Band Gold Plated DT12-4 — — — —
Solid – Green Band DT12-1-CAT — — — —
CAT-Spec
Solid – Green Band Gold Plated DT12-4-CAT — — — —
Kit Contents:
• Receptacle & Wedgelock • Contacts – Pin
• Plug & Wedgelock • Contacts – Socket

13
 DEUTSCH

Half Kits
Half Kits contain all components to make
one half of a connection.
Each kit contains Green Band contacts and a standard
DT Series housing with appropriate wedgelock.
DT8FP-1 DT4MP-1

DT Series – Half Kits

Contact Type No. of Cavities
Style
(Size 16) 2 3 4 6 8 12
Receptacle Solid – Green Band DT2MP-1 DT3MP-1 DT4MP-1 DT6MP-1 DT8MP-1 DT12MP-1
Plug Solid – Green Band DT2FP-1 DT3FP-1 DT4FP-1 DT6FP-1 DT8FP-1 DT12FP-1

Kit Contents:
• Receptacle or Plug
• Wedgelock
• Contacts – Pin or Socket

The P012 enhanced seal

wedgelocks are now standard for
the 2 & 3 cavity DT Series
Blue wedgelocks (1939) are used
in place of the standard orange
wedgelocks to indicate the main
CAN line backbone.

W2P W2PA W2SA W3S-1939 W3P-1939 W4S W6P W12S W3S-P012

DT Series – Pack Quantities – Wedgelocks

Cavities Type Suits Part No. 10 50 100 1000 Bulk Box
Standard Receptacles W2P • • • • 22,000
Enhanced Seal Plugs W2S-P012 • • • • 8000
2
A Keying Receptacles W2PA — — — — —
A Keying Plugs W2SA — — — — —
Standard Receptacles W3P • • • • 20,000
Enhanced Seal Plugs W3S-P012 • • • • 6000
3
J1939 Plugs W3S-1939 • • • — —
J1939 Receptacles W3P-1939 • • • — —
Standard Receptacles W4P • • • — 15,000
4 Standard Plugs W4S • • • — 5000
Enhanced Seal Plugs W4S-P012 • • • — —
Standard Receptacles W6P • • • — 10,000
6 Standard Plugs W6S • • • — 3500
Enhanced Seal Plugs W6S-P012 • • • — —
Standard Receptacles W8P • • • — 5000
8 Standard Plugs W8S • • • — 2500
Enhanced Seal Plugs W8S-P012 • • • — —
Standard Receptacles W12P • • • — 5000
12 Standard Plugs W12S • • • — 2000
Enhanced Seal Plugs W12S-P012 • • • — —

14
 DEUTSCH

1011-026-0205 1011-027-0805 1027-005-1200 1027-008-1200

DT Series – Mounting Clips

Part No. Suits Mounting Direction Colour / Material Mounting Hole Ø (mm)
1011-026-0205 All except 8 cavity Straight Grey plastic 5
1011-027-0805 8 cavity connectors only Straight Grey plastic 5

1027-001-0800 8 cavity connectors only Straight Stainless steel 11

1027-003-1200 All except 8 cavity Straight Stainless steel 11
1027-005-1200 All except 8 cavity Straight Stainless steel 13

1027-008-1200 All except 8 cavity Side Zinc plated steel 11

Ø 4mm

31mm

DT Series – Special – Flange Mount Receptacle

Part No. Description Wire Length Mating Plug
DT2-PM 2 pin flange mount receptacle with soldered wires and rubber sealing gasket 40mm DT06-2S

15
 DEUTSCH

DTB2S DT12P-BT DT3P-BT-BK

DT Series – Accessories – Insulators/Boots

No. of Cavities
Colour 2 3 4 6 8 12
Receptacles – 120mm Black DTB2P DTB3P DTB4P DTB6P DTB8P DTB12P
Plugs – 120mm Black DTB2S DTB3S DTB4S DTB6S DTB8S DTB12S

Receptacles – 65mm Grey DT2P-BT DT3P-BT DT4P-BT DT6P-BT DT8P-BT DT12P-BT

Plugs – 65mm Grey DT2S-BT DT3S-BT DT4S-BT DT6S-BT DT8S-BT DT12S-BT
Receptacles – 65mm Black DT3P-BT-BK

DT06-6S

1011-345-0305 1011-349-1205
1011-347-0605

DT Series – Dust Caps

No. of Cavities
2 3 4 6 8 12
Part No. 1011-344-0205 1011-345-0305 1011-346-0405 1011-347-0605 1011-348-0805 1011-349-1205
Suits DT06-2S DT06-3S DT06-4S DT06-6S DT06-08S DT06-12S

16
 DEUTSCH

A
1011-250-1205

C
A
C

D B D B

1011-257-0205

DT Series – Backshells – Receptacles

Straight 90° Suits A (NW) A (NC) B (mm) C (mm) D (mm)
1011-257-0205 1011-258-0205 DT04-2P 7.5, 8.5, 10 8, 10, 12 55 20 45
1011-261-0305 1011-262-0305 DT04-3P 7.5, 8.5, 10 8, 10, 12 65 27 56
1011-265-0405 1011-266-0405 DT04-4P 7.5, 8.5, 10 8, 10, 12 59 24 53
1011-269-0605 1011-270-0605 DT04-6P 8.5, 10, 13 10, 12, 16 65 28 55
1011-245-0805 1011-246-0805 DT04-08P 8.5, 10, 13 10, 12, 16 62 30 57
1011-249-1205 1011-250-1205 DT04-12P 12, 13, 17 14, 16, 20 64 29 59

1011-247-1205

A
C

A
C

D B D B

1011-260-0305

DT Series – Backshells – Plugs

Straight 90° Suits A (NW) A (NC) B (mm) C (mm) D (mm)
1011-255-0205 1011-256-0205 DT06-2S 7.5, 8.5, 10 8, 10, 12 42 37 32
1011-259-0305 1011-260-0305 DT06-3S 7.5, 8.5, 10 8, 10, 12 46 48 37
1011-263-0405 1011-264-0405 DT06-4S 7.5, 8.5, 10 8, 10, 12 44 45 35
1011-267-0605 1011-268-0605 DT06-6S 8.5, 10, 13 10, 12, 16 45 50 39
1011-243-0805 1011-244-0805 DT06-08S 8.5, 10, 13 10, 12, 16 49 51 41
1011-247-1205 1011-248-1205 DT06-12S 12, 13, 17 14, 16, 20 55 51 45

17
 DEUTSCH

• 18 cavity arrangement.
• Protective end cap as standard.
C
• Environmentally sealed – IP68, IP6K9K, when
installed to manufacturer's specifications.
• Accepts size 16 contacts, each with 13A
continuous capacity.
• Flange mount receptacle.
• Rectangular, thermoplastic housing.
DTV Series

• Latched mating.
• Wedgelocks ensure contact alignment
and retention.

Housing : Thermoplastic
Seal : Silicon Rubber
Wedgelock : Thermoplastic
Contact Size : 16
Contact Rating : 13A @ 125°C
Shock : 50G
Vibration : 20G rms 10 – 2000Hz
Approvals : 20mm Flame Test per Standard UL-94
Ingress Protection : IP68, IP6K9K
Operating Temperature : -55­­°C to 125°C

Part Numbering System

DTV 02 – 18  S A
Series Prefix : Keying Options :
DTV Series – DTV A – Grey housing
B – Black housing
C – Green housing
Connector Style :
D – Brown housing

For complete
Receptacle – 02 details on contacts
P – Pins
Contact Type & further options
S – Sockets
see page 63.

Plug – 06 18 – Number of Cavities

DTV02-18PA DTV06-18SA WV-18P WV-18S

DTV Series
A Keying B Keying (Black housing) Style Wedgelock
DTV02-18PA DTV02-18PB Receptacle WV-18P
DTV06-18SA DTV06-18SB Plug WV-18S

18
Catalogu
Catalogues
 DEUTSCH

• Environmentally sealed – IP68, IP6K9K, when

installed to manufacturer's specifications.
• 2, 3, 4, 6, 8 and 12 cavity arrangements.
• Latched mating.
• Wedgelocks ensure contact alignment
and retention.
DTM Series

• Accepts size 20 contacts, each with 7.5A

continuous capacity.
• Available in Kits with Solid, or Solid – Gold
plated contact options.
• Each Kit contains all components required to
make both sides of a connection.

Housing : Thermoplastic
Seal : Silicon Rubber
Wedgelock : Thermoplastic
Contact Size : 20
Contact Rating : 7.5A @ 125°C
Shock : 50G
Vibration : 20G rms 10 – 2000Hz
Approvals : 20mm Flame Test per Standard UL-94
Ingress Protection : IP68, IP6K9K
Operating Temperature : -55­­°C to 125°C

Part Numbering System

DTM 06 – 12  S A – E007
Special Modifications :
Series Prefix : blank – No modification.
DTM Series – DTM E007 – Heat shrink adaptor.
E004 – Black connector body.
Connector Style : P006 – 20 Ohms terminating resistor.
EP10 – 20 Ohms terminating resistor. Black.
Receptacle – 04
L012 – Flange Mount receptacle.

Keying Options :
Plug – 06
blank – no keying
A – Grey housing Keying Option is only
2 available with 08 and
B – Black housing
3 12 cavity housings.
C – Green housing
Number of 4
D – Brown housing
Cavities : 6
08 Pins – P
Contact Type
12 Sockets – S

Special Modifications
DTM04-2P-E007 DTM04-4P-E004
E007 E004 L012
Heat shrink Black connector Flange Mount receptacle.
adaptor. body.

DTM04-2P-P006
DTM06-2S-EP10
P006 EP10
20 Ohms 20 Ohms
terminating terminating DTM04-12PA-L012
resistor. resistor. Black.

20
 DEUTSCH

DTM0X- 2 X DTM0X- 3 X DTM0X- 4 X DTM0X- 6 X DTM0X- 08 X X DTM0X- 12 XX

2 x size 20 3 x size 20 4 x size 20 6 x size 20 8 x size 20 12 x size 20

A, B, C, D A, B, C, D

DTM Series – Popular Components

Receptacle Components Plug Components
Circuits
Housing Wedgelock Size 20 Pin – Nickel Housing Wedgelock Size 20 Socket – Nickel
2 DTM04-2P WM-2P 0460-202-20141 DTM06-2S WM-2S 0462-201-20141
AWG20 / 0.2-0.5mm2 AWG20 / 0.2-0.5mm2
3 DTM04-3P WM-3P DTM06-3S WM-3S
4 DTM04-4P WM-4P DTM06-4S WM-4S
6 DTM04-6P WM-6P DTM06-6S WM-6S
8 DTM04-08PA WM-8P DTM06-08SA WM-8S
0413-204-2005 0413-204-2005
12 DTM04-12-PA WM-12P Sealing Plug DTM06-12SA WM-12S Sealing Plug

For complete details on contacts & further options see page 63.

DTM Series – Pack Quantities – Housings

Receptacles Plugs
Cavities Part No. 10 50 100 Bulk Box Cavities Part No. 10 50 100 Bulk Box
DTM04-2P • — • 1200 DTM06-2S • • • 3000
DTM04-2P-E007 • — — 1000 DTM06-2S-E007 • • — 2000
2 2
DTM04-2P-P006 • — — 1000
DTM04-2P-P007 • — — 200
DTM04-3P • • • 1000 DTM06-3S • • • 2000
3 3
DTM06-3S-E007 • • — 1400
DTM04-4P • • • 800 DTM06-4S • • — 1600
4 4 DTM06-4S-E004 • — — 1600
DTM06-4S-E007 • — — 1200
DTM04-6P • • • 650 DTM06-6S • • — 1300
6 6
DTM06-6S-E007 • • — 1000
DTM04-08PA • — — 500 DTM06-08SA • • — 900
8 8
DTM06-08SA-E007 • — — 600
DTM04-12PA • — — 350 DTM06-12SA • • • 600
DTM04-12PB • — — 350 DTM06-12SA-E007 • — — 500
12 12 DTM06-12SB • • — 600
DTM06-12SC • — — 600
DTM06-12SD — — — 600

Bulk Boxes
Bulk are available
Boxes for the
are available complete
for the completerange
range of DEUTSCH
of DEUTSCH upon
upon request,
request, lead times
lead times may apply.
may apply.

21
 DEUTSCH

DTM4-1

DTM Series – Kits

Pack No. of Cavities
Contact Type Size
Quantity 2 3 4 6 8 12
1 DTM2-1 DTM3-1 DTM4-1 DTM6-1 DTM8-1 DTM12-1
Solid 20
10 DTM2-1/10 DTM3-1/10 DTM4-1/10 DTM6-1/10 DTM8-1/10 DTM12-1/10
Solid – Gold Plated 20 1 DTM2 DTM3 DTM4 DTM6 DTM8 DTM12
Kit Contents:
• Receptacle & Wedgelock
• Plug & Wedgelock
• Contacts – Pin
• Contacts – Socket

WM-2P WM-2PA WM-2PB WM-3P WM-4P WM-6P WM-8P WM-12P

WM-2SB WM-3S WM-4S WM-6S WM-8S WM-12S

WM-2S WM-2SA

DTM Series – Pack Quantities – Wedgelocks

Cavities Type Suits Part No. 10 50 100
Standard Receptacles WM-2P • • •
“A” Keyed Receptacles WM-2PA — — —

“B” Keyed Receptacles WM-2PB — — —

2
Standard Plugs WM-2S • • •
“A” Keyed Plugs WM-2SA — — —

“B” Keyed Plugs WM-2SB — — —

Standard Receptacles WM-3P • • •

3
Standard Plugs WM-3S • • •
Standard Receptacles WM-4P • • •
4
Standard Plugs WM-4S • • •
Standard Receptacles WM-6P • • •
6
Standard Plugs WM-6S • • •
Standard Receptacles WM-8P • • •
8
Standard Plugs WM-8S • • •
Standard Receptacles WM-12P • • •
12
Standard Plugs WM-12S • • •

22
 DEUTSCH

DTM3S-BT

DTM Series – Accessories – Insulators/Boots

No. of Cavities
Colour 2 3 4 6 8 12
Receptacles Grey DTM2P-BT DTM3P-BT DTM4P-BT DTM6P-BT DTM8P-BT DTM12P-BT
Plugs Grey DTM2S-BT DTM3S-BT DTM4S-BT DTM6S-BT DTM8S-BT DTM12S-BT

1011-026-0205 1011-027-0805 1027-005-1200 1027-008-1200

DTM Series – Mounting Clips

Part No. Suits Mounting Direction Colour / Material Mounting Hole Ø (mm)
1011-026-0205 All except 8 cavity Straight Grey plastic 5
1011-027-0805 8 cavity connectors only Straight Grey plastic 5

1027-001-0800 8 cavity connectors only Straight Stainless steel 11

1027-003-1200 All except 8 cavity Straight Stainless steel 11
1027-005-1200 All except 8 cavity Straight Stainless steel 13

1027-008-1200 All except 8 cavity Side Zinc plated steel 11

23
 DEUTSCH

• Convenient on-site service kits containing

assortments of DT, DTM Series connectors,
contacts and Backshells.
• DTKIT-2 includes crimp tool and multi-use
removal tool.
• Solid and Stamped & Formed (F-Crimp)
Assortment Kits

contact kits available.

• Contents clearly listed.

Housing : Thermoplastic
Seal : Silicon Rubber
Wedgelock : Thermoplastic
Contact : Copper Alloy
Contact Plating : Nickel
Shock : 50G
Vibration : 20G rms 10 – 2000Hz
Approvals : 20mm Flame Test per Standard UL-94
Ingress Protection : IP68, IP6K9K
Operating Temperature : -55­­°C to 125°C

DTKIT DTKIT-1

Assortment Kits – DT Series

Part No. Description Kit Contents

Receptacles & Wedgelocks: Plugs & Wedgelocks: Contacts & Sealing Plugs:
3 x DT04-2P 3 x DT06-2S 12 x 114017 Sealing Plugs
F-Crimp contacts. 3 x DT04-3P 3 x DT06-3S 40 x 1060-16-0122L F-Crimp Pin
2 x DT04-4P 2 x DT06-4S 40 x 1062-16-0122L F-Crimp Socket
DTKIT Standard DT Series 1 x DT04-6P 1 x DT06-6S
connectors. 1 x DT04-08PA 1 x DT06-08SA
1 x DT04-12PA 1 x DT06-12SA

Receptacles & Wedgelocks: Plugs & Wedgelocks: Contacts & Sealing Plugs:
3 x DT04-2P 3 x DT06-2S 12 x 114017 Sealing Plugs
Solid contacts. 3 x DT04-3P 3 x DT06-3S 40 x 0460-215-16141 Solid Pin – Green Band
DTKIT-1 Standard DT Series 2 x DT04-4P 2 x DT06-4S 40 x 0462-209-16141 Solid Socket – Green Band
1 x DT04-6P 1 x DT06-6S
connectors. 1 x DT04-08PA 1 x DT06-08SA
1 x DT04-12PA 1 x DT06-12SA

24
 DEUTSCH

Assortment Kits – DT Series including Tools

Part No. Description Kit Contents

Receptacles & Wedgelocks: Plugs & Wedgelocks: Contacts & Sealing Plugs:
Solid contacts. 3 x DT04-2P 3 x DT06-2S 12 x 114017 Sealing Plug
3 x DT04-3P 3 x DT06-3S 40 x 0460-215-16141 Solid Pin – Green Band
Standard DT Series 2 x DT04-4P 2 x DT06-4S 40 x 0462-209-16141 Solid Socket – Green Band
DTKIT-2
connectors. 1 x DT04-6P 1 x DT06-6S Tools:
1 x DT04-08PA 1 x DT06-08SA 1 x DET-RT Removal Tool
Crimp and Multi-Use tool. 1 x DT04-12PA 1 x DT06-12SA 1 x DET16 Crimp Tool

Assortment Kits – DT Series ‘CAT-Spec’

Part No. Description Kit Contents

Receptacles & Wedgelocks: Plugs & Wedgelocks: Contacts & Sealing Plugs:
3 x DT04-2P-E005 3 x DT06-2S-EP06 12 x 114017 Sealing Plug
Solid contacts. 3 x DT04-3P-EOO5 3 x DT06-3S-EP06 40 x 0460-215-16141 Solid Pin – Green Band
DTKIT-1-CAT ‘CAT-Spec’ DT Series 2 x DT04-4P-EOO5 2 x DT06-4S-EP06 40 x 0462-209-16141 Solid Socket – Green Band
1 x DT04-6P-EOO5 1 x DT06-6S-EP06
Connectors. 1 x DT04-08PA-EOO5 1 x DT06-08SA-EP08
1 x DT04-12PA-EOO5 1 x DT06-12SA-EP08

‘CAT-Spec’
The 3 modified DT Series connector housings with suffix E005, EP06 & EP08 are
typically referred to as ‘CAT-Spec’, short for CATERPILLAR Specification.
These modified DT Series connector housings are used on most CATERPILLAR
mining machinery as an OEM standard connector.
At a glance, they are black, include improved seal retention on the plug (DT06 side,
DT04-6P-E005
by using the P012 wedgelock), and a cap on the rear of the housing to retain the
connectors rear wire seal.

DT06-12SA-EP08

25
 DEUTSCH

DTBS DTBS-1

Assortment Kits – Backshells for DT Series

Part No. Style Kit Contents

Backshells Straight – Receptacles: Backshells Straight – Plugs:

8 x 1011-257-0205 – Suits DT04-2P 8 x 1011-255-0205 – Suits DT06-2S
5 x 1011-261-0305 – Suits DT04-3P 5 x 1011-259-0305 – Suits DT06-3S
4 x 1011-265-0405 – Suits DT04-4P 4 x 1011-263-0405 – Suits DT06-4S
DTBS Straight 3 x 1011-269-0605 – Suits DT04-6P 3 x 1011-267-0605 – Suits DT06-6S
1 x 1011-245-0805 – Suits DT04-8P 1 x 1011-243-0805 – Suits DT06-8S
1 x 1011-249-1205 – Suits DT04-12P 1 x 1011-247-1205 – Suits DT06-12S

Backshells 90° – Receptacles: Backshells 90° – Plugs:

8 x 1011-258-0205 – Suits DT04-2P 8 x 1011-256-0205 – Suits DT06-2S
6 x 1011-262-0305 – Suits DT04-3P 6 x 1011-260-0305 – Suits DT06-3S
DTBS-1 90° 3 x 1011-266-0405 – Suits DT04-4P 3 x 1011-264-0405 – Suits DT06-4S
3 x 1011-270-0605 – Suits DT04-6P 3 x 1011-268-0605 – Suits DT06-6S
1 x 1011-246-0805 – Suits DT04-8P 1 x 1011-244-0805 – Suits DT06-8S
1 x 1011-250-1205 – Suits DT04-12P 1 x 1011-248-1205 – Suits DT06-12S

DTMKIT DTMKIT-1

Assortment Kits – DTM Series

Part No. Description Kit Contents

Receptacles & Wedgelocks: Plugs & Wedgelocks: Contacts & Sealing Plugs:
4 x DTM04-2P 4 x DTM06-2S 20 x 0413-204-2005 Sealing Plug
F-Crimp contacts. 4 x DTM04-3P 4 x DTM06-3S 50 x 1060-20-0122L F-Crimp Pin
4 x DTM04-4P 4 x DTM06-4S 50 x 1062-20-0122L F-Crimp Socket
DTMKIT Standard DTM Series 2 x DTM04-6P 2 x DTM06-6S
connectors. 2 x DTM04-08PA 2 x DTM06-08SA
2 x DTM04-12PA 2 x DTM06-12SA

Receptacles & Wedgelocks: Plugs & Wedgelocks: Contacts & Sealing Plugs:
4 x DTM04-2P 4 x DTM06-2S 20 x 0413-204-2005 Sealing Plug
Solid contacts. 4 x DTM04-3P 4 x DTM06-3S 50 x 0460-202-20141 Solid Pin
4 x DTM04-4P 4 x DTM06-4S 50 x 0462-201-20141 Solid Socket
DTMKIT-1 Standard DTM Series 2 x DTM04-6P 2 x DTM06-6S
connectors. 2 x DTM04-08PA 2 x DTM06-08SA
2 x DTM04-12PA 2 x DTM06-12SA

26
 DEUTSCH

• Environmentally sealed – IP68, IP6K9K, when

installed to manufacturer's specifications.
• Available in 2 and 4 cavity arrangements.
• Rectangular, thermoplastic housing.
• Latched mating.
• Wedgelocks ensure contact alignment
and retention.

DTP Series
• Accepts size 12 contacts, each with 25A
continuous capacity.
• Available in Kits with Solid, or Solid – Gold
plated contact options.
• Each Kit contains all components required to
make both sides of a connection.

Housing : Thermoplastic
Seal : Silicon Rubber
Wedgelock : Thermoplastic
Contact Size : 12
Contact Rating : 25A @ 125°C
Shock : 50G
Vibration : 20G rms 10 – 2000Hz
Approvals : 20mm Flame Test per Standard UL-94
Ingress Protection : IP68, IP6K9K
Operating Temperature : -55­­°C to 125°C

Part Numbering System

DTP 04 – 02 P – E003

Series Prefix : Special Modifications :

DTP Series – DTP blank – No modification.
E003 – Protective end cap.
Connector Style : L012 – Flange mount receptacle.

Receptacle – 04
Contact Type :
Pins – P
Plug – 06 Sockets – S

Number of 2
Cavities : 4

Special Modifications

DTP04-4P-L012

DTP04-2P-E003 DTP06-4S-E003

E003 L012
Protective end cap attached to the rear of the connector. Flange mount receptacle.

27
 DEUTSCH

DTP0X- 2 X DTP0X- 4 X

2 x size 12 4 x size 12

DTP Series – Popular Components

Receptacle Components Plug Components
Circuits
Housing Wedgelock Size 12 Pin – Nickel Housing Wedgelock Size 12 Socket – Nickel

2 DTP04-2P WP-2P 0460-204-12141 DTP06-2S WP-2S 0462-203-12141

AWG12-14 / 2.0-3.0mm2 AWG12-14 / 2.0-3.0mm2

4 DTP04-4P WP-4P 114017 DTP06-4S WP-4S 114017

Sealing Plug Sealing Plug

For complete details on contacts & further options see page 63.

DTP Series – Pack Quantities – Housings

Receptacles Plugs
Cavities Part No. 10 50 Bulk Box Cavities Part No. 10 50 Bulk Box
DTP04-2P • • 550 DTP06-2S • • 1200
2 2
DTP04-2P-E003 • — — DTP06-2S-E003 • — —

DTP04-4P • • 350 DTP06-4S • • 800

4 DTP04-4P-E003 • — — 4 DTP06-4S-E003 • — —

DTP04-4P-L012 • — —

DTP4-1

DTP Series – Kits

No. of Cavities
Contact Type Size Kit Contents:
2 4 • Receptacle & Wedgelock
Solid 12 DTP2-1 DTP4-1 • Plug & Wedgelock
• Contacts – Pin
Solid – Gold Plated 12 DTP2-4 DTP4-4 • Contacts – Socket

28
 DEUTSCH

WP-2P WP-4P WP-2S WP-4S

DTP Series – Pack Quantities – Wedgelocks

Receptacles Plugs
Cavities Part No. 10 50 Cavities Part No. 10 50
2 WP-2P • • 2 WP-2S • •
4 WP-4P • • 4 WP-4S • •

1011-026-0205 1027-003-1200 1027-005-1200 1027-008-1200

DTP4P-L012-GKT

DTP Series – Accessories

Part No. Description Mounting Direction Colour / Material Mounting Hole Ø (mm)
1011-026-0205 Mounting Clip Straight Grey plastic 5
1027-003-1200 Mounting Clip Straight Stainless steel 11
1027-005-1200 Mounting Clip Straight Stainless steel 13
1027-008-1200 Mounting Clip Side Zinc Plated steel 11

DTP4P-L012-GKT Mounting gasket suiting 4 circuit flange mount L012 receptacle (DTP04-4P-L012)

29
 DEUTSCH

• Cylindrical thermoplastic design.

DTHD04-1-4P • Latched mating.
• Accepts contact sizes 4, 8,  12.
• 6–14 AWG.
DTHD06-1-8S • 1 cavity arrangement.
• Each Kit contains all components required to
DTHD Series

make both sides of a connection.

DTHD04-1-8P

Housing : Thermoplastic
DTHD06-1-12S
Seal : Silicon Rubber
Vibration : 20G rms 10 – 2000Hz
Operating Temperature : -55­­°C to 125°C

Part Numbering System

DTHD 06 – 1 – 4 S – L009
Series Prefix : Special Modifications :
DTHD Series – DTHD blank – No modification.
L009 – Sealed flange.
Connector Style : L013 – Sealed flange.

Contact Type :
Receptacle – 04
P – Pins
S – Sockets
Plug – 06
Contact Size :
4 – 100A
Number of Cavities : 1 8 – 60A
12 – 25A

Special Modifications
DTHD04-1-4P-L009

DTHD04-1-4P-L013

L009 L013
Sealed flange. Through panel mount. Sealed flange. Surface mount.
DTHD04-1-4P only. DTHD04-1-4P only.

30
 DEUTSCH

DTHD04-1-4P DTHD04-1-8P DTHD04-1-12P DTHD06-1-4S DTHD06-1-8S DTHD06-1-12S

DTHD Series – Pack Quantities – Housings

Receptacles Plugs
Contact Size Rating (A) @ 125°C Part No. 10 Contact Size Rating (A) @ 125°C Part No. 10
4 100 DTHD04-1-4P • 4 100 DTHD06-1-4S •
8 60 DTHD04-1-8P • 8 60 DTHD06-1-8S •
12 25 DTHD04-1-12P • 12 25 DTHD06-1-12S •

For complete details on contacts & further options see page 63.

DTHD4-1

DTHD Series – Kits

Contact Size
Contact Type Kit Contents:
4 8 12 1 x Receptacle
Solid DTHD4-1 DTHD8-1 DTHD12-1 1 x Plug
1 x Contact – Pin
1 x Contact – Socket

1027-003-1200 1027-005-1200
1011-026-0205

DTHD Series – Mounting Clips

Part No. Mounting Direction Colour / Material Mounting Hole (mm)
1027-003-1200 Straight Stainless steel 11
1027-005-1200 Straight Stainless steel 13
1011-026-0205 Straight Grey plastic 5

31