Scribd
Upload
173 views

Declaration of Conformity DA Europe-AP

This document is an EU declaration of conformity for a desiccant dryer assembly manufactured by Plurifilter d.o.o. It declares that the assembly, which includes two extruded aluminum tubes filled with desiccant and associated piping and valves, meets the requirements of the Pressure Equipment Directive. The dryer is classified as Category II pressure equipment with a maximum design pressure of 14 bar and operating temperatures between 1-50°C. Plurifilter's quality management system is certified to ISO 9001 and their conformity assessment process followed Module D1.

Uploaded by

Martin Koychev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
173 views

Declaration of Conformity DA Europe-AP

This document is an EU declaration of conformity for a desiccant dryer assembly manufactured by Plurifilter d.o.o. It declares that the assembly, which includes two extruded aluminum tubes filled with desiccant and associated piping and valves, meets the requirements of the Pressure Equipment Directive. The dryer is classified as Category II pressure equipment with a maximum design pressure of 14 bar and operating temperatures between 1-50°C. Plurifilter's quality management system is certified to ISO 9001 and their conformity assessment process followed Module D1.

Uploaded by

Martin Koychev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

For Ingersoll Rand

MANUFACTURER: Plurifilter d.o.o.


Obrtna Cona 14, 1370 Logatec
Slovenia

EU DECLARATION OF CONFORMITY
(In accordance to the Pressure Equipment Directive PED 2014/68/EU)
We,
Plurifilter d.o.o.
declare, under our sole responsibility, that the assembly of pressure equipment type Desiccant Dryer,
with two identical Extruded Aluminum Tubes, filled with desiccant, and associated with a piping and
valves,
Desiccant Dryer Serial Nameplate:

meets the essential safety requirements of the Pressure Equipment Directive 2014/68/EU of the
European Parliament.

In accordance with the procedure of conformity assessment, this pressure equipment is classified under Point 6 of
the Article 2.
Description of the pressure equipment constituting the assembly:
Design Pressure TS [°C]
No. Description Manuf. Category PS [bar] min / max
Pressure vessel/tower Cat. I +1°C to
1 (Extruded Tube) AlBrx. cat. II 14 +50°C

Classified category of pressure equipment: II (&cat.I)


Used conformity assessment procedure: Module D1
(full quality assurance and special surveillance of the final assessment)
Dryer models classified to safety category art. 4.3: do not fall under PED 2014/68/EU (See Nameplate)
*All art.4.3 Dryer models are tested as leakage test

Used harmonized standards: SIST EN 10204:2004; EN 12392:2000


Used non-harmonized standards: BS ISO 7183:2007

Other Community Directives:


N/A

Manufacturer's quality system controlled by:


Bureau Veritas Italia, Spa
Notified Body No.: 1370

Certificate of QSA No.: CE-1370-PED-D1-PFI 002-19-SVN


Certificate of ISO 9001 No.: 10335247, issued by Lloyd’s Register valid until 05/02/2024

Date: Logatec 2021 Signature: ______________


GM Giovanni Battista Capellari

You might also like