Scribd
Upload
404 views

Technical Data and Delivery

This document provides technical specifications and delivery details for an assembly stand with a universal flange from BMW. The assembly stand has dimensions of 1250 x 810 x 1070 mm and weighs approximately 110 kg. It can lift components up to 200 mm and has a load capacity of 600 kg. Included in delivery are a pump lever, chassis, universal flange, oil drip tray, storage tray, crank, and instructions. Required accessories include a support arm and mounting plate for the engine and a cylinder head clamping fixture. Optional accessories include a universal seat mounting holder.

Uploaded by

yohanes nelson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
404 views

Technical Data and Delivery

This document provides technical specifications and delivery details for an assembly stand with a universal flange from BMW. The assembly stand has dimensions of 1250 x 810 x 1070 mm and weighs approximately 110 kg. It can lift components up to 200 mm and has a load capacity of 600 kg. Included in delivery are a pump lever, chassis, universal flange, oil drip tray, storage tray, crank, and instructions. Required accessories include a support arm and mounting plate for the engine and a cylinder head clamping fixture. Optional accessories include a universal seat mounting holder.

Uploaded by

yohanes nelson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data and scope of delivery from assemnly stand with iuniversal flange

BMW part number: 83 30 0 495 187

Technical Data Unit Value


Dimensions (L x W x H) mm 1250 x 810 x 1070
Weight approx. kg 110
Lifting height mm 200
Supplier BOSCH Automotive Service
Load carrying capacity kg 600

Delivery specification:

• Pump lever for height adjustment (foot-operated)


• Chassis with 4 rollers (2 braked)
• Universal flange
• Oil drip tray
• Storage tray for small parts
• Crank for rotating held components
• Operating instructions
• TÜV (technical inspectorate) certificate
Required Accessories:

83 30 0 495 196 Support arm with mounting plate


For holding the engine along the
longitudinal sides. Engine-specific
adapters are described in the relevant
repair instructions.

Delivery specification (set):

(1) Support arm

(2) Mounting plate

83 30 0 494 362 Cylinder head clamping fixture

For clamping the cylinder head when


removing and installing the valves.
Supplementary spring baskets can be
found in the specific repair instructions
and must be ordered optionally.

Optional Accessories:
Universal seat mounting holder
81 69 2 154 711
SIM21

For professional repairing of all vehicle


seats.

You might also like