Scribd
Upload
25 views

Sheet 2

This document contains 18 practice problems involving electric circuits, resistors, and circuit analysis. The problems involve calculating currents, voltages, resistances, and power using concepts like Ohm's law, Kirchhoff's voltage law, and reducing circuits to their equivalent resistances. Diagrams of the circuit setups are provided for reference with each problem.

Uploaded by

Toka Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views

Sheet 2

This document contains 18 practice problems involving electric circuits, resistors, and circuit analysis. The problems involve calculating currents, voltages, resistances, and power using concepts like Ohm's law, Kirchhoff's voltage law, and reducing circuits to their equivalent resistances. Diagrams of the circuit setups are provided for reference with each problem.

Uploaded by

Toka Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Faculty: Engineering Module Title: Electric Circuits

Year : 1 Sheet: 2

1. The voltage across a 5-k resistor is 16 V. Find the current through the resistor.

2. Find the hot resistance of a lightbulb rated 60 W, 120 V.

3. When the voltage across a resistor is 120 V, the current through it is 2.5 mA.
Calculate its conductance.

4. (a) Calculate current i in Fig.1 when the switch is in position 1.


(b) Find the current when the switch is in position 2.

Figure 1

5. Find i1, i2, and i3 in Fig.2.

Figure 2

1
6. Given the circuit in Fig.3 , use KVL to find the branch voltages V1 to V4.

Figure 3

7. Find v1, v2, and v3 in the circuit in Fig.4 .

Figure 4

8. Find v1 and v2 in the circuit in Fig.5.

Figure 5

9. Find I and Vab in the circuit of Fig.6.

Figure 6

2
10. Find i, v, and the power dissipated in the 6- resistor in Fig.7 ..

Figure 7

11. Find i1 through i4 in the circuit in Fig.8 .

Figure 8

12. Determine i1, i2, v1, and v2 in the ladder network in Fig.9 . Calculate the power
dissipated in the 2- resistor.

Figure 9

13. Calculate Vo and Io in the circuit of Fig.10 .

3
Figure 10

14. For the ladder network in Fig.11 , find I and Req.

Figure 11

15. If Req = 50  in the circuit in Fig.12 , find R.

Figure 12

16. Reduce each of the circuits in Fig.13 to a single resistor at terminals a-b.

4
Figure 13

17. Obtain the equivalent resistance at the terminals a-b for each of the circuits in Fig.14 .

Figure 14

5
18. Find Req and I in the circuit of Fig.15 .

Figure 15

You might also like