A35 3 / " Round Straight Aluminum Pole

1
2

Project:
Type: Qty:
A35 _ _ _ _ _
Ordering Format:
Pole Series Height Finish Option Option Option

Height Wall EPA Information (ft 2) Finish Options

Thickness
70 mph 80 mph 90 mph 100 mph 110 mph
WH White BC1 Decorative Cast
8 8 ft. 0.197 16.1 12.2 9.4 7.3 5.9
Aluminum Base
BK Black Cover
10 10 ft. 0.197 12.4 9.3 7.1 5.4 4.3
BZ Bronze BC4 Decorative Cast
12 12 ft. 0.197 9.9 7.3 5.4 4.0 3.1
Aluminum Base
SV Silver Cover
14 14 ft. 0.197 8.0 5.8 4.2 3.0 2.2
SP Specify REC GFCI Receptacle
16 16 ft. 0.197 4.9 3.2 2.2 1.4 0.8 RAL#
PCT Photocell Tenon

PC Photocell

Consult factory
Height

for other options

Other heights available, consult factory. EPA Calculations allow for 1.3 Gust Factor

Standard Specifications
Pole Shaft - Pole shaft is Base Cover - Standard two-piece All Poles are constructed per
extruded from seamless 6061 base cover is made from die- AASHTO standards for structural
alloy aluminum which is heat cast 356 alloy aluminum which is supports for highway signs, lumi-
treated to a T6 temper. heat treated to produce a T6 naires and traffic signals as pub-
temper, measuring 4 1/2" lished in 1975, amended and
Anchor Base - Anchor base is (115mm) height by 12 1/2" adopted in 1985 and 1994.
cast from 356 alloy aluminum (316mm) diameter.
which is heat treated to a T6 A consideration of field condi-
temper. The anchor base cast- Finish - SELUX utilizes a high tions such as (but not limited to)
ing and shaft are joined by a quality Polyester Powder wind zone, height, vibration must
continuous circumferential weld Coating. All SELUX luminaires be given by the designer/specifi-
at the outside top and inside bot- and poles undergo a five stage er for the appropriate application.
tom of the anchor base. intensive pretreatment process
where product is thoroughly Performance of poles is depen-
Access Hole - The opening cleaned, phosphated and sealed. dent upon proper support/attach-
24" measures 2" x 4" (50 x 100mm). SELUX powder coated products ment of pole to adequate founda-
(610mm) Cover is supplied with tamper provide excellent salt and humid- tion design. SELUX does not
resistant fasteners. 5/16 -18 ity resistance as well as ultra vio- design or offer recommendations
ground lug is located inside pole, let resistance for color retention. for foundations. EPA values
opposite the hand hole. All products are tested in accor-
assume that the bottom of the
dance with test specifications for
Anchor Bolts - Pole is supplied pole is at grade level.
coatings from ASTM and PCI.
with four 3/4 x 17" steel hot dip Call SELUX (1-800-SELUXCS) if
galvanized anchor bolts each Standard exterior colors are there are any questions, or for
with two nuts, two flat washers White (WH), Black (BK), any assistance in determining
and one lock washer. Bronze (BZ), and Silver (SV). suitability with appropriate fixtures.
RAL colors (SP) are available,
SELUX Corp. © 2007 please specify RAL#.
PO Box 1060, 5 Lumen Lane
Highland, NY 12528 In a continuing effort to offer the best product
TEL: (845) 691-7723 possible, we reserve the right to change, with-
FAX: (845) 691-6749 out notice, specifications or materials that in our
opinion will not alter the function of the product.
E-mail: [email protected] Specification sheets found at www.selux.com/usa
Web Site: www.selux.com/usa are the most recent versions and supercede all
A35-1008-01 (ss-V2.2) other printed or electronic versions.
A35 3 / " Round Straight Aluminum Pole
1
2

Bolt Circle Anchor Bolt Detail

Use caution when setting anchor bolts. Bolts must be 3/4

-10 Galvanized
vertically straight and centered on dimensions shown. 3
/4 x 17" Heavy Hex Nut
Galvanized Anchor Bolts
3/4"(19mm) ID
Galvanized Lock Washer
Ø 7 3/4" (197mm)
Bolt Circle 3/4" (19mm) ID
7 3/4" 3 1/4" Galvanized
(197mm) (83mm) Flat Washers

Ø 3" (76mm) Grout by others

Opening
1/2" (13mm)
Hand Hole Location for leveling

Note: Adequate drainage must be provided in concrete foundation or grout.

3/4 - 10 Galvanized Concrete footing
Heavy Hex Leveling designed and
Nut supplied by others

Base Covers Optional BC1 Base Cover

One-piece cast aluminum

Ø 3 1/2"
(90 mm)

Optional BC4 Base Cover

Standard Base Cover
One-piece cast aluminum
(BC5)
Two-piece cast aluminum
21 5/8"
(550 mm) Ø 3 1/2"
(90 mm)
Ø 3 1/2" (90 mm)

4 1/2" 5 1/4"
(116 mm) (133 mm)

∅ 12 1/2" ∅ 12 5/8" ∅ 11 1/2"

(316 mm) (320 mm) (291 mm)

Optional Accessories
Photo Cell (PC) - Twist lock photocell Photo Cell Tenon (PCT) - Button type GFCI Receptacle (REC) - GFCI duplex receptacle
mounted to aluminum cap which attaches photocell mounted in cast aluminum pole with cast base that is bolted to pole and gasketed,
to pole top or can be remotely located. top tenon. Tenon has integral cast visor to provided with weather-proof, self-closing cover;
Can be oriented for optimum performance. prevent false start/stop cycle and can be located 36" (915mm) from base of pole, inline with
Refer to fixture spec sheet to determine if oriented for optimum performance. Refer handhole. Receptacle is intended only for portable
this option is applicable. to fixture spec sheet to determine if this tools or other portable equipment to be connected
option is applicable. to outlet only when attended by operating personnel.
2 13/16"
3 3/16" (71mm)
(81mm) 13/16"

(21mm)

4 5/16" (109 mm)

1/2"
1 3/8" (34 mm)
(13 mm) 2 13/16"
(71mm)

In a continuing effort to offer the best product possible, we reserve the right to
SELUX Corporation change, without notice, specifications or materials that in our opinion will not alter
www.selux.com/usa the function of the product. Specification sheets found at www.selux.com/usa are the
A35-1008-02 (6-49096-00) most recent versions and supercede all other printed or electronic versions.